Approved Checked Prepared

Contact Area : Gold Flash

Description： 1394 6Pin over USB 2.0 Right Angle, Through Hole

Matte Tin over Nickel

To：

UDE P/N： U2D0-ZZ-0001

Customer P/N：

Spec No. Update Date Revision

U2D017001-00 2017/6/21 A

Spec No. : U2D017001-00 U2D0-ZZ-00011. MECHANICAL DIMENSION

1.1 Product Dimension

www.ude-corp.com2017/6/21 - 1 -

General Tolerance:Unit:mm ± 0.38± 0.25

X.X :X.XX :

Spec No. : U2D017001-00 U2D0-ZZ-00011.2 Recommended PCB Layout

Component Side of Board

All dimension tolerances are ±0.05mm unless otherwise specified

1.3 Packing Information

40 pcs finished goods per tray

6 trays(240 pcs finished goods) per inner box

4 Inner boxes(960 pcs finished goods) per master carton

www.ude-corp.com2017/6/21 - 2 -

Spec No. : U2D017001-00 U2D0-ZZ-00011.4

www.ude-corp.com2017/6/21

1394 6pin Plug Specification

- 3 -

All dimensions follow : TA Document 1999042/1.0, January 13,2000[1] Theoretical sharp corner; chamfer profile tolerance exclude radii.[2] Chamfers and ESD features are excluded from profile tolerance.[3] Contact Sharp is of the option of the manufacturer.[4] Theoretical intersection of R0.3 with main surface.

Spec No. : U2D017001-00 U2D0-ZZ-00011.5

- All dimensions follow : Universal Series Bus Specification 2.0 (April 27,2000)

Figure 6-9. USB Series A Plug Interface Drawing

www.ude-corp.com2017/6/21

Standard USB 2.0 Plug Specification

- 4 -

Spec No. : U2D017001-00 U2D0-ZZ-00012. REQUIREMENTS

2.1 Design and Construction

2.2 Material

2.2.1 Terminal Parts (Underplating : 30μ"min. Nickel overall)

2.2.1.1 USB Terminal : PH. Bronze, Thickness=0.25mm

Finish : Contact Area : Gold Flash

Solder Tail : 100μ" min. Matte Tin

2.2.1.2 1394 Terminal : Brass, Thickness=0.25mm

Finish : Contact Area : Gold Flash

Solder Tail : 100μ" min. Matte Tin

2.2.2 Plastic Parts <UL94V-0>

2.2.2.1 Housing : PBT, Black

2.2.2.2 Spacer : PBT, Black

2.2.3 Shield Parts

2.2.3.1 Front Shield : Stainless steel, Thickness=0.25mm, unplating

2.2.3.2 Back Shield : Stainless steel, Thickness=0.20mm, pre-soldering

2.2.3.3 USB Shield : Stainless steel, Thickness=0.25mm, unplating

2.2.3.4 1394 Shield : Stainless steel, Thickness=0.20mm, unplating

www.ude-corp.com- 5 -2017/6/21

Product shall be of design, construction and physical dimensions specifiedon applicable.

Spec No. : U2D017001-00 U2D0-ZZ-00012.3 Operating and Storage Temperature

2.4

Contact Current Rating : 1.5A MAX

Contact Resistance : 30 ohm MAX

2.5

Contact Current Rating : 1.5A MAX

Contact Resistance : 30 ohm MAX

500Vac/minute

2.6 Performance and Test Description

2.7 Packaging and Packing

www.ude-corp.com

10N min

Durability : 1500 cycles

All parts shall be packaged and packed to protect against physicaldamage、corrosion and deterioration during shipment and storage.

Dielectric Withstanding Voltage :

35N max

Product is designed to meet electrical, mechanical and environmentalperformance requirements specified in below table. All tests are performedat ambient environmental conditions per MIL-STD-1344A and EIA-364unless otherwise specified.

- 6 -

Durability : 1000 cycles

Insertion force :

Removal force :

1000MΩ min.

USB 2.0 specifications

Insulation Resistance :

Insulation Resistance :100MΩ min.

Dielectric Withstanding Voltage :

Insertion force : /

1394 4Pin specifications

Operating Temperature : -40°C to +85°C

500Vdc±50Vdc

9.8N min , 39.2N max.

2017/6/21

Removal force :

Storage Temperature : -40°C to +85°C

Spec No. : U2D017001-00 U2D0-ZZ-00013. WAVE SOLDERING TEMPERATURE PROFILE

www.ude-corp.com2017/6/21 - 7 -

Spec No. : U2D017001-00 U2D0-ZZ-00014. Revision History

www.ude-corp.com

Initial Release . Jeff2017/6/21

Issue Date

A

Revision Comments Operator

2017/6/21 - 8 -