Any changes to be made on site to the location of the common service trench, and/or electrical & street lighting equipment must first be verified by the electrical designer and the project manager/engineering consultant. Any changes to work within proposed SA Power Networks easements must also be verified by the project surveyor.
AutoCAD SHX Text
Side boundary
AutoCAD SHX Text
Front boundary
AutoCAD SHX Text
%%U(LV service pillar, fused position)
AutoCAD SHX Text
%%UNOTE:
AutoCAD SHX Text
%%USTANDARD POSITION OF SERVICE PILLAR
AutoCAD SHX Text
600mm cover required over conduit connections
AutoCAD SHX Text
600mm cover required over conduit connections
AutoCAD SHX Text
With approval from the relevant SA Power Networks manager, the developer can request a non-standard service pillar position.
AutoCAD SHX Text
Each service pillar to have a 40mm conduit for the allotment on which it is placed, in addition to a neighbour connection shown. (Refer to E1978)
AutoCAD SHX Text
%%UNot to Scale
AutoCAD SHX Text
TS-085Trenching and Conduit Standard for Underground Distribution Cable NetworksTrenching and Conduit Standard for Underground Distribution Cable Networks
AutoCAD SHX Text
TS-099Distribution and Sub-Transmission CAD Drafting StandardsDistribution and Sub-Transmission CAD Drafting Standards
AutoCAD SHX Text
TS-100Electrical Design Standard for Underground Distribution Cable NetworksElectrical Design Standard for Underground Distribution Cable Networks
AutoCAD SHX Text
TS-101Public Lighting - Design and InstallationPublic Lighting - Design and Installation
AutoCAD SHX Text
TS-102Easement Standard for Distribution NetworksEasement Standard for Distribution Networks
AutoCAD SHX Text
TS-105Testing for Underground & Overhead Distribution Powerlines Testing for Underground & Overhead Distribution Powerlines up to and including 33kV Networks
AutoCAD SHX Text
TS-107Overhead Line Design Standard for Transmission & Distribution SystemsOverhead Line Design Standard for Transmission & Distribution Systems
AutoCAD SHX Text
TS-108Technical Standard for Distribution Equipment and Transformer RoomsTechnical Standard for Distribution Equipment and Transformer Rooms
AutoCAD SHX Text
TS-109Earthing of the Distribution NetworkEarthing of the Distribution Network
AutoCAD SHX Text
NICC-400Information for an Applicant Undertaking a Contestable ExtensionInformation for an Applicant Undertaking a Contestable Extension
AutoCAD SHX Text
NICC-404 Working in the Vicinity of SA Power Networks Infrastructure Working in the Vicinity of SA Power Networks Infrastructure - Network Access Permit Process
AutoCAD SHX Text
Visit SA Power Networks web site for the current version of the Technical Standards
AutoCAD SHX Text
THIS DRAWING TO BE READ IN CONJUNCTION WITH THE FOLLOWING SA POWER NETWORKS TECHNICAL STANDARDS
AutoCAD SHX Text
FOR CONDUIT BEND DETAIL REFER SA POWER NETWORKS TS-085 TABLE 7 to 9.
AutoCAD SHX Text
Mains side
AutoCAD SHX Text
Service side
AutoCAD SHX Text
LV Road Road Road crossing
AutoCAD SHX Text
boundary
AutoCAD SHX Text
The pit may be offset to avoid a driveway by aligning the short side of the pit with the shared side boundary of the property. The mains and service side can be on either the left or right to suit the site installation. NOTE: Ends of consumers mains to be 600mm into lot boundary, Ends of consumers mains to be 600mm into lot boundary, extended above ground level and marked with a 'star dropper' and orange marker tape. Final consumer main locations to be coordinated on site with existing and proposed services.
AutoCAD SHX Text
UNFUSED P7 PIT WITH GEL PORTS ARRANGEMENT Service fuses required in customer's meter box when supplied from unfused P7 junction pit. Install 40mm HD orange electrical conduit from 40mm HD orange electrical conduit from from P7 pit to property boundary as per AS/NZS3000. For service connections details refer E1921 Sheet 4 and TS-085 for cable entry and exiting positioning. For unmetered supply/public lighting supply refer E1921 Sheet 4.3. For P7 Gelports pit arrgt. refer DST 1745 Sheet, arrgt. 1, 2 & 3 For LV main cable junction connection details refer E1921 Sheet 3.3. For installation and connection refer E-drawings, JSWP 140 and Field Instruction FI-A1.
AutoCAD SHX Text
P7
AutoCAD SHX Text
G
AutoCAD SHX Text
SHEET OF
AutoCAD SHX Text
REV
AutoCAD SHX Text
A1
AutoCAD SHX Text
SCALE
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
6
AutoCAD SHX Text
5
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
10
AutoCAD SHX Text
12
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
G
AutoCAD SHX Text
F
AutoCAD SHX Text
11
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
6
AutoCAD SHX Text
5
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
10
AutoCAD SHX Text
12
AutoCAD SHX Text
11
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
G
AutoCAD SHX Text
F
AutoCAD SHX Text
H
AutoCAD SHX Text
H
AutoCAD SHX Text
PROJECT DEFINITION:
AutoCAD SHX Text
NOTIFICATION TYPE
AutoCAD SHX Text
PROJECT TYPE
AutoCAD SHX Text
GRID REF:
AutoCAD SHX Text
MAP REF:
AutoCAD SHX Text
SURVEYORS NAME:
AutoCAD SHX Text
HORIZ:
AutoCAD SHX Text
GRID REF:
AutoCAD SHX Text
MAP REF:
AutoCAD SHX Text
SURVEYORS NAME:
AutoCAD SHX Text
HORIZ:
AutoCAD SHX Text
FEEDER NAME:
AutoCAD SHX Text
FEEDER NO:
AutoCAD SHX Text
ASSET OWNER:
AutoCAD SHX Text
SUB NAME:
AutoCAD SHX Text
SUBSTATION NO:
AutoCAD SHX Text
VERT:
AutoCAD SHX Text
CO-ORDINATE DATUM
AutoCAD SHX Text
GROUND SCALE:
AutoCAD SHX Text
ZONE:
AutoCAD SHX Text
SURVEY DATE:
AutoCAD SHX Text
REV
AutoCAD SHX Text
DETAILS OF REVISION
AutoCAD SHX Text
RVD
AutoCAD SHX Text
DATE
AutoCAD SHX Text
CKD
AutoCAD SHX Text
APD
AutoCAD SHX Text
INSP
AutoCAD SHX Text
Head Office: 1 Anzac Highway Keswick South Australia 5035 Postal address: GPO Box 77 Adelaide South Australia 5001 Corporate switchboard 08 8404 5667 (9.00am - 5.00pm Monday to Friday) ABN: 13 332 330 749
AutoCAD SHX Text
DRAWN
AutoCAD SHX Text
CHECKED
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
REV
AutoCAD SHX Text
DETAILS OF REVISION
AutoCAD SHX Text
RVD
AutoCAD SHX Text
DATE
AutoCAD SHX Text
CKD
AutoCAD SHX Text
APD
AutoCAD SHX Text
INSP
AutoCAD SHX Text
REV
AutoCAD SHX Text
DETAILS OF REVISION
AutoCAD SHX Text
RVD
AutoCAD SHX Text
DATE
AutoCAD SHX Text
CKD
AutoCAD SHX Text
APD
AutoCAD SHX Text
INSP
AutoCAD SHX Text
INSPECTED
AutoCAD SHX Text
Hundred of Munno Para
AutoCAD SHX Text
in the area named
AutoCAD SHX Text
ANGLE VALE
AutoCAD SHX Text
City Of Playford
AutoCAD SHX Text
MUSICO - STAGE 5
AutoCAD SHX Text
UNDERGROUND RESIDENTIAL DEVELOPMENT
AutoCAD SHX Text
DEV. No. 292/D068/17
AutoCAD SHX Text
1:500
AutoCAD SHX Text
5000XXXXX
AutoCAD SHX Text
1
AutoCAD SHX Text
MGA-54-GDA94
AutoCAD SHX Text
6628-19-b
AutoCAD SHX Text
284016.67 E
AutoCAD SHX Text
6162863.33 N
AutoCAD SHX Text
284220.32 E
AutoCAD SHX Text
6162903.17 N
AutoCAD SHX Text
EL 17
AutoCAD SHX Text
CURTIS RD 11kV
AutoCAD SHX Text
SA POWER NETWORKS
AutoCAD SHX Text
XX-000000
AutoCAD SHX Text
CN
AutoCAD SHX Text
PRELIMINARY
AutoCAD SHX Text
SSD-273
AutoCAD SHX Text
ANGLE VALE
AutoCAD SHX Text
A
AutoCAD SHX Text
RD
AutoCAD SHX Text
1
AutoCAD SHX Text
A
AutoCAD SHX Text
PRELIMINARY ISSUE
AutoCAD SHX Text
WGA
AutoCAD SHX Text
JP
AutoCAD SHX Text
06-08-21
AutoCAD SHX Text
T TOFIGHI
AutoCAD SHX Text
J PARKER
AutoCAD SHX Text
N GOSDEN
AutoCAD SHX Text
ELIZABETH
AutoCAD SHX Text
(08) 8282 1543
AutoCAD SHX Text
28-07-21
AutoCAD SHX Text
30-07-21
AutoCAD SHX Text
Property line
AutoCAD SHX Text
TYPICAL COMMON SERVICE TRENCH CROSS SECTION (Not to scale) NOTE: Refer to SA Power Networks Technical Standard TS-85
AutoCAD SHX Text
Marker Gas
AutoCAD SHX Text
300
AutoCAD SHX Text
750
AutoCAD SHX Text
G
AutoCAD SHX Text
940 to top of spare conduit
AutoCAD SHX Text
S HV
AutoCAD SHX Text
S LV
AutoCAD SHX Text
S LV
AutoCAD SHX Text
400
AutoCAD SHX Text
HV
AutoCAD SHX Text
LV
AutoCAD SHX Text
LV
AutoCAD SHX Text
PL
AutoCAD SHX Text
Marker Private/CLER & SAPN/SAPN Telco cables (Trace wire as required)
AutoCAD SHX Text
Private Consumers Conduit
AutoCAD SHX Text
Marker 3rd Party Telco
AutoCAD SHX Text
50
AutoCAD SHX Text
50
AutoCAD SHX Text
200
AutoCAD SHX Text
Gas Main
AutoCAD SHX Text
SAPN Telco
AutoCAD SHX Text
Public Light in Conduit
AutoCAD SHX Text
50
AutoCAD SHX Text
3rd Party Telco
AutoCAD SHX Text
450
AutoCAD SHX Text
820
AutoCAD SHX Text
100 min
AutoCAD SHX Text
Flexible Consumers Gas Pipe
AutoCAD SHX Text
900 wide (Typ.)
AutoCAD SHX Text
800 min to Kerb
AutoCAD SHX Text
500 min to Property Boundary
AutoCAD SHX Text
300
AutoCAD SHX Text
100
AutoCAD SHX Text
Bedding Sand in accordance with TS-085
AutoCAD SHX Text
1100 to top of buried cables
AutoCAD SHX Text
approx 1200 (1500 max)
AutoCAD SHX Text
LV Spare Conduit
AutoCAD SHX Text
HV Spare Conduit
AutoCAD SHX Text
%%ULEGEND
AutoCAD SHX Text
P7
AutoCAD SHX Text
G
AutoCAD SHX Text
PROPOSED 3x630mm ² 11kV XLPE CABLE (CK6039) 11kV XLPE CABLE (CK6039) EXISTING 630mm² 11kV CABLE 11kV CABLE PROPOSED 3x95mm² 11kV XLPE CABLE (CK6006) 11kV XLPE CABLE (CK6006) EXISTING 95mm² 11kV CABLE 11kV CABLE PROPOSED 150mm² LV UBC XLPE CABLE (CK5310) LV UBC XLPE CABLE (CK5310) EXISTING 150mm² LV CABLE LV CABLE PROPOSED PARALLEL 150mm² LV UBC XLPE CABLE (CK5310) LV UBC XLPE CABLE (CK5310) EXISTING PARALLEL 150mm² LV UBC XLPE CABLE LV UBC XLPE CABLE PROPOSED PUBLIC LIGHTING CABLE 6mm² TWIN & 6mm² EARTH IN 40mm TWIN & 6mm² EARTH IN 40mm EARTH IN 40mm CONDUIT EXISTING PUBLIC LIGHTING CABLE PROPOSED 40mm HD ORANGE ELECTRICAL CONDUIT & DRAW ROPE FOR CONSUMERS MAIN TOAS/NZS 3000. DEPTH 800mm. REFER TYPICAL CST CROSS SECTION & STANDARD SA POWER NETWORKS SERVICE PIT LOCATION ARRANGEMENT. EXISTING CONSUMERS MAIN PROPOSED LV UNDERGROUND OPEN POINT PROPOSED SPARE CONDUITS EXISTING SPARE CONDUITS BOUNDARY OF DESIGN AREA
AutoCAD SHX Text
PROPOSED TRAFFICABLE P7 UNFUSED LV JUNCTION PIT WITH GELPORTS. P7 PIT TO BE REINFORCED WITH 200mm CONCRETE SURROUND, N12 BAR TOP AND BOTTOM 480mm DEEP AS PER E1921 SHT 7.3 PROPOSED FUSED RADIAL PILLAR. PROPOSED FUSED LOOP PILLAR. PROPOSED FUSED-T/OFF PILLAR. EXISTING SERVICE PILLAR. PROPOSED HV STRAIGHT JOINT PROPOSED PADMOUNT TRANSFORMER. BOUNDARY/PROPERTY LINE KERB LINE 17W STREETLED AEROSCREEN LED, 4000K, BLACK FINISH 4000K, BLACK FINISH (EM4022) MOUNTED ON BLACK 6.5m MODERN COLUMN WITH 1.5m DECORATIVE MODERN OUTREACH (WA4017). EXISTING LED LUMINAIRE
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
E
AutoCAD SHX Text
1
AutoCAD SHX Text
K
AutoCAD SHX Text
L
AutoCAD SHX Text
B
AutoCAD SHX Text
L
AutoCAD SHX Text
CAP AND BURY 2x100mm LV CONDUIT 1m PAST LOT 585 BOUNDARY. INSTALL CONDUIT SPACERS LAST 2m.
AutoCAD SHX Text
AS1158.3.1:2020 LIGHTING DESIGN ROAD CATEGORY ROAD CATEGORY PHILIP AVENUE PR3 PR3 ALL OTHER ROADS PR5 PR5 DATE: 30/07/2021 NAME: J. Parker
AutoCAD SHX Text
E
AutoCAD SHX Text
PROPOSED SA POWER NETWORKS TRANSFORMER LOCATION AND EASEMENT DETAILS (Not to scale)
AutoCAD SHX Text
B
AutoCAD SHX Text
L
AutoCAD SHX Text
B
AutoCAD SHX Text
L
AutoCAD SHX Text
K
AutoCAD SHX Text
L
AutoCAD SHX Text
K
AutoCAD SHX Text
L
AutoCAD SHX Text
S.L.D. OF PROPOSED 11/0.4kV 315kVA LOOP Mk7 PADMOUNT TRANSFORMER TCXXXXX - (LC7309A) LOT 593 PHILIP AVENUE
Parallel 4x150mm² LV cable to P7 LV cable to P7 pit adj lot 588 Maria Street.
AutoCAD SHX Text
4x150mm² LV cable to service pillar LV cable to service pillar lot 902 Polifrone Close.
AutoCAD SHX Text
4x150mm² LV cable to service pillar LV cable to service pillar lot 638 Philip Avenue.
AutoCAD SHX Text
PL FUSE REQ.
AutoCAD SHX Text
LV OPEN POINT
AutoCAD SHX Text
FOR DETAILS OF TRANSFORMER CONNECTION, REFER TO SLD. FOR LOCATIONS, REFER TO EASEMENT DETAILS.
AutoCAD SHX Text
COORDINATE FINAL ROAD CROSSING LOCATION ON SITE WITH UNDERGROUND SERVICES (TYPICAL).
AutoCAD SHX Text
COORDINATE FINAL PL COLUMN LOCATION ON SITE WITH UNDERGROUND SERVICES, DRIVEWAY & FOOTPATH (TYPICAL).
AutoCAD SHX Text
COORDINATE FINAL P7 PIT LOCATION ON SITE WITH UNDERGROUND SERVICES, DRIVEWAY & FOOTPATH (TYPICAL).
AutoCAD SHX Text
PUSH PROPOSED LV CABLING THROUGH EXISTING CONDUITS.
AutoCAD SHX Text
TRANSFORMER EASEMENT AS SHOWN
AutoCAD SHX Text
FOR MIRAVALE STAGE 4 DETAILS REFER TO DRAWING 500026072.
AutoCAD SHX Text
FOR MUSICO STAGE 2 DETAILS REFER TO DRAWING 500026122.
AutoCAD SHX Text
NAP1
AutoCAD SHX Text
SCOPE OF WORKS CONTESTABLE WORKS Electrical Contractor to: Undertake all new work within development. Provide completed TS-105 C1 & C2 forms. Provide 'As Constructed' drawings within 7 days of submitting certificate of compliance to SA Power Networks Network Management group at no charge. Provide documented results proving condition of the existing assets to NPO prior commencing works on any existing infrastructure: - megger and phase ID all cables megger and phase ID all cables - megger all screens and carry out core to screen/earth test for megger all screens and carry out core to screen/earth test for all HV cables - contact NPO for direction if any faults discovered. contact NPO for direction if any faults discovered. Obtain networks access permits for work near live network assets and excavate jointing bays to facilitate works using hydro excavation method in accordance with TS-85 Locate all existing underground cables prior to excavation. Push 4x150mm² LV cable through existing conduit into existing ² LV cable through existing conduit into existing LV cable through existing conduit into existing service pillar at lot 563 Polifrone Close, cap for termination by SA Power Networks. Locate all existing underground cables prior to excavation. Coil sufficient 1 set of 3x630mm² and 1 set of 3x95mm² HV cables ² and 1 set of 3x95mm² HV cables and 1 set of 3x95mm² HV cables ² HV cables HV cables adj lot 593 Philip Avenue adj existing capped HV cables for straight jointing by SA Power Networks. Locate all existing underground cables prior to excavation. Push 4x150mm² LV cable through existing conduit into existing ² LV cable through existing conduit into existing LV cable through existing conduit into existing service pillar at lot 84 Philip Avenue, cap for termination by SA Power Networks. Developer Civil Contractor to: Comply with requirements of NICC-404, TS105-C1 & C2 when working in the vicinity of the electricity network. Undertake civil on request by SA Power Networks. NON CONTESTABLE WORKS SA Power Networks to: Terminate & connect 4x150mm² LV cable into existing service pillar 4x150mm² LV cable into existing service pillar ² LV cable into existing service pillar LV cable into existing service pillar at lot 563 Polifrone Close. Create LV Open Point. Install 1 set of 3x630mm² and 1 set of 3x95mm² HV cable straight ² and 1 set of 3x95mm² HV cable straight and 1 set of 3x95mm² HV cable straight 3x95mm² HV cable straight ² HV cable straight HV cable straight joints adj lot 593 Philip Avenue. Terminate & connect 4x150mm² LV cable into existing service pillar 4x150mm² LV cable into existing service pillar ² LV cable into existing service pillar LV cable into existing service pillar at lot 84 Philip Avenue. SA Power Networks to carry out testing, connection and energising of the development, including public lighting.
AutoCAD SHX Text
NAP2
AutoCAD SHX Text
NAP3
AutoCAD SHX Text
3x95mm² HV cable capped and HV cable capped and buried adj lot 638 Philip Avenue.
AutoCAD SHX Text
INSTALL PL COLUMN 1.2m B.O.K.
AutoCAD SHX Text
TRANSITION JOINT
AutoCAD SHX Text
CAP AND BURY 2x100mm LV CONDUIT 1m PAST LOT 638 BOUNDARY. INSTALL CONDUIT SPACERS LAST 2m.
AutoCAD SHX Text
CAP AND BURY 2x100mm LV CONDUIT 1m PAST LOT 638 BOUNDARY. INSTALL CONDUIT SPACERS LAST 2m.
AutoCAD SHX Text
TO LS2 TC65436
AutoCAD SHX Text
TO LS4 C3579
AutoCAD SHX Text
NOTES: 1. Developer responsible for trenching in accordance with SA Power Networks trenching & Developer responsible for trenching in accordance with SA Power Networks trenching & conduit standard TS-085. Construction to be in accordance with SA Power Networks technical standards and SA Power Networks 'E' drawings. 2. Cables to be laid in 1x100mm dia. LD (low duty) orange conduit at all road crossings unless Cables to be laid in 1x100mm dia. LD (low duty) orange conduit at all road crossings unless otherwise stated. Road crossing conduits for radial (type1) service pits are to extend to the boundary line of the property and be fully continuous. Other road crossings to extend 900mm beyond kerb. 3. The conduit for a radial low voltage road crossing installation needs to be continuous The conduit for a radial low voltage road crossing installation needs to be continuous (fully conduited) as per E1904 Sheet 4, with conduit between pillars installed in such away that it will facilitate quick cable replacement. If this is achieved a spare conduit is not required. 4. Spare conduits for LV cables are to be inserted to approximately 25mm and capped within Spare conduits for LV cables are to be inserted to approximately 25mm and capped within P7 pits. HV spares are to be diverted around pits, as per TS-085 section 11.2 and appendix D requirements. 5. For NBN Developments, install the CST Road Crossing 90° to the allotment boundary. For NBN Developments, install the CST Road Crossing 90° to the allotment boundary. 6. Cables to have 1000mm minimum cover. Cables to have 1000mm minimum cover. 7. Cables through easements to be installed in conduit with spare and marker tape as per Cables through easements to be installed in conduit with spare and marker tape as per TS-085 clause 10.12. Cable markers are to be installed in cable easement as per E1979. 8. Electrical contractor to provide 45° sweep bends. Provide lube injection points prior to each Electrical contractor to provide 45° sweep bends. Provide lube injection points prior to each bend for long cable pulling distances. Refer SA Power Networks E1906 drawings for detailed requirements. 9. Any existing underground services shown on these drawings are indicative only, no claim is Any existing underground services shown on these drawings are indicative only, no claim is made that the existing services shown are accurate or complete. Other services may be present which shall be the contractor's responsibility to locate and depth prior to any construction works. Any cable system and equipment must be treated as energised unless otherwise confirmed by SA Power Networks. 10. Phasing of consumer connections as shown. Phasing of consumer connections as shown. 11. Public lighting to be all-night burning. Public lighting to be all-night burning. 12. Number of allotments - 32 @ 6kVA -192kVA total Number of allotments - 32 @ 6kVA -192kVA total 13. Number of public lights - 8x17W LED (TFI Tariff). Number of public lights - 8x17W LED (TFI Tariff). 14. Developer - Lanser Communities. Developer - Lanser Communities. 15. Consulting Engineer - Kellogg Brown & Root Pty Ltd. Consulting Engineer - Kellogg Brown & Root Pty Ltd. 16. Surveyor - Alexander Symonds Pty Ltd. Surveyor - Alexander Symonds Pty Ltd. 17. Due to the schematic nature of the drawing, the position of equipment shown is indicative Due to the schematic nature of the drawing, the position of equipment shown is indicative only. Actual locations should be verified on site. 18. Retaining walls are required around transformer and switching cubicle easements where the Retaining walls are required around transformer and switching cubicle easements where the final level changes by more than 300mm in the 2.0m adjacent the easement. The walls are to be built prior to installation of the transformer or switching cubicle and are to be located on the easement. 19. All walls, fences, ceilings and floors within 1.2m of the padmount transformer station shall All walls, fences, ceilings and floors within 1.2m of the padmount transformer station shall have a 3 hour fire rating as determined by the Building Code of Australia. 20. SA Power Networks is responsible for the connecting and energising of the stage. SA Power Networks is responsible for the connecting and energising of the stage. 21. Contractor to ensure Hydro Vacuum Excavation maximum working pressure is limited to Contractor to ensure Hydro Vacuum Excavation maximum working pressure is limited to 2000psi as per TS-085 section 10.14. Any proposed excavation methods adjacent SA Power Networks infrastructure should be in accordance with NICC-404. Network Access Permits (NAP) required for works on and/or around SA Power Networks exclusion and/or restricted zones as per NICC-404 section 9.1 - figures 1,2 and 3. 22. Contractor to provide as constructed drawings to SA Power Networks for approval prior to Contractor to provide as constructed drawings to SA Power Networks for approval prior to practical completion. Changes can be made by design consultant for hourly rate charge or AutoCAD format drawings can be purchased from consultant for revision by contractor. 23. Construction by - Construction by - 'As Constructed' details provided by - WGA is not responsible for the accuracy of the 'As Constructed' details provided.
AutoCAD SHX Text
LV OPEN POINT
AutoCAD SHX Text
PL FUSE REQ.
AutoCAD SHX Text
CROSS SECTION A-A
AutoCAD SHX Text
Marker Tape
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
Marker Tape
AutoCAD SHX Text
S
AutoCAD SHX Text
LOCATE ALL EXISTING CABLES PRIOR TO EXCAVATION. USE HYDRO EXCAVATION AS PER TS-85.
AutoCAD SHX Text
EXTEND 3x95mm² HV CABLE 1m PAST LOT 638 ² HV CABLE 1m PAST LOT 638 HV CABLE 1m PAST LOT 638 BOUNDARY AND LOOP AROUND AS PROVISION FOR SUPPLYING FUTURE STAGE. DO NOT EXCEED BENDING RADIUS OF CABLES. FINAL LOCATION OF LOOP TO BE COORDINATED ON SITE WITH SUPERINTENDENT. RECORD EXACT GPS LOCATION OF CABLE LOOP FOR INCLUSION ON AS CONSTRUCTED DRAWINGS.
![[Please Note: These minutes will be confirmed on 27 June 2017] · [Please Note: These minutes will be confirmed on 27 June 2017] Mayor _____ 27 June 2017 3. APOLOGIES/LEAVE OF ABSENCE](https://img.pdfslide.us/doc/110x75/5f4daf2e8e4f38486e3590f1/please-note-these-minutes-will-be-confirmed-on-27-june-2017-please-note-these.jpg)
![[Please Note: These minutes will be confirmed on … Council/170523... · [Please Note: These minutes will be confirmed on 27 June 2017] ... PRESIDING MEM ER’S OPENING REMARKS](https://img.pdfslide.us/doc/110x75/5b91c73a09d3f211298c7c32/please-note-these-minutes-will-be-confirmed-on-council170523-please-note.jpg)
