2
Quick Start Guide Waypoints To use the Shortcuts menu: 1. Select Shortcuts. The Shortcuts menu appears. 2. Rotate the Rock ‘n Roller™ to the preferred application and press ENTER. To mark a waypoint: 1. From the Map page, select Shortcuts. Rotate the Rock ‘n Roller and select Mark Waypoint. The screen shows that the waypoint was successfully saved. A three-digit number is assigned to the new waypoint (your current location). 2. Select Done to save the waypoint. Select Edit to edit the waypoint properties. Select Cancel to delete the waypoint. To go to a waypoint: 1. Select Shortcuts > Where To? > Waypoints. 2. Highlight the preferred waypoint and press ENTER. A green circle containing the word Go appears. 3. Press ENTER to begin navigating to the waypoint, or press Options to project or edit the waypoint. 4. To stop navigation, select Shortcuts > Stop Navigation. System Status To adjust the backlight level: 1. Press and quickly release the Power key. The System Status page on the Colorado appears. 2. Rotate the Rock ‘n Roller clockwise or counter-clockwise to increase or decrease the backlight. 3. Select Back to close the System Status page and return to the previous page. System Status Page Backlight adjustment Battery level GPS signal strength Time, day, and date NOTE: The System Status page is also a quick way to check the time, day, date, battery level, and GPS signal strength. Map Page To access the Map page: 1. Select Shortcuts > Map. 2. Select Options to show the Data fields, change the Data fields, or hide the soft key labels. To zoom in and out on the Map page: 1. Rotate the Rock ‘n Roller clockwise to zoom in. 2. Rotate the Rock ‘n Roller counter-clockwise to zoom out. Zoom Out View Zoom In View Zoom scale To pan across the map: 1 Press up, down, left, and right on the Rock ‘n Roller to move the cursor on the map. 2. Select Done to stop panning. Please visit www.garmin.com for additional documentation and information. 190-00751-01 Rev. A © 2007 Garmin Ltd. or its subsidiaries Printed in Taiwan Waypoint Page Colorado Series all-terrain GPS navigator Waypoint Saved Mark Waypoint on Shortcuts 190-00751-01_0A.indd 1 10/19/2007 10:36:08 AM

To access the Map page: to show the Data fields, change the ...static.garmin.com/pumac/Colorado300_ENQuickStartGuide.pdfpreferred application and press ENTER. To mark a waypoint: 1

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: To access the Map page: to show the Data fields, change the ...static.garmin.com/pumac/Colorado300_ENQuickStartGuide.pdfpreferred application and press ENTER. To mark a waypoint: 1

Quick Start GuideWaypointsTo use the Shortcuts menu:1. SelectShortcuts.TheShortcuts

menuappears.2. RotatetheRock ‘n Roller™tothe

preferredapplicationandpressENTER.

To mark a waypoint:1. FromtheMappage,select

Shortcuts.RotatetheRock ‘nRollerandselectMark Waypoint.Thescreenshowsthatthewaypointwassuccessfullysaved.Athree-digitnumberisassignedtothenewwaypoint(yourcurrentlocation).

2. SelectDonetosavethewaypoint.SelectEdittoeditthewaypointproperties.SelectCanceltodeletethewaypoint.

To go to a waypoint:1. SelectShortcuts>Where To?>

Waypoints.2. Highlightthepreferredwaypoint

andpressENTER.AgreencirclecontainingthewordGoappears.

3. PressENTERtobeginnavigatingtothewaypoint,orpressOptionstoprojectoreditthewaypoint.

4. Tostopnavigation,selectShortcuts>Stop Navigation.

System StatusTo adjust the backlight level:1. Pressandquicklyreleasethe Powerkey.TheSystem

StatuspageontheColoradoappears.2. RotatetheRock ‘n Rollerclockwiseorcounter-clockwise

toincreaseordecreasethebacklight.3. SelectBacktoclosetheSystemStatuspageandreturnto

thepreviouspage.

System Status Page

Backlight adjustment

Battery levelGPS signal strength

Time, day, and date

Note: TheSystemStatuspageisalsoaquickwaytocheckthetime,day,date,batterylevel,andGPSsignalstrength.

Map PageTo access the Map page:1. SelectShortcuts>Map.2. SelectOptions to show the Data fields, change the Data

fields, or hide the soft key labels.

To zoom in and out on the Map page:1. RotatetheRock ‘nRollerclockwisetozoomin.2. RotatetheRock ‘nRoller counter-clockwisetozoomout.

Zoom Out View Zoom In View

Zoom scale

To pan across the map:1 Pressup,down,left,andrightontheRock ‘n Rollerto

movethecursoronthemap.2. SelectDonetostoppanning.

Pleasevisitwww.garmin.comforadditionaldocumentationandinformation.

190-00751-01Rev.A©2007GarminLtd.oritssubsidiariesPrintedinTaiwanWaypoint Page

Colorado™ Series

all-terrain GPS navigator

Waypoint Saved

Mark Waypoint on Shortcuts

190-00751-01_0A.indd1 10/19/200710:36:08AM

Page 2: To access the Map page: to show the Data fields, change the ...static.garmin.com/pumac/Colorado300_ENQuickStartGuide.pdfpreferred application and press ENTER. To mark a waypoint: 1

Overview StartupUsing the Rock ‘n Roller™

• RotatetheRock ‘n Rollertomoveupanddownmenulists.Youcanalsomovethroughthelistsbypressingup,down,left,andright.

• PressENTERtomakeallselectionsontheColorado.

• Pressup,down,left,andrightontheRock ‘n Rollertopanthemap.

Using Soft KeysTheLeftsoftkeyandtheRightsoftkeyareusedtoaccess specific options that appear on the soft key labels.Whenlabeled,pressthesoftkeystoshowavailablemenus.Ifasoftkeyisnotlabeled,itisnotavailableforthatspecific page.

Soft key label

Right soft key

Soft key label

Left soft key

Additional FunctionsTo install batteries:1. Removethebatterycover

byliftingthelatchandslidingthecoverofftheColorado.

2. Insertthebatteries,observingthediagrammoldedintothebatterycompartment.

3. ReplacethebatterycoverbyslidingitbackontotheColoradoandfasteningthelatch.

To attach the carabiner clip:1. Positionthecarabinerclipintheslotsonthemounting

spineoftheColorado.2. Slidetheclipupuntilitlocksinplace.3. Toremovethecarabinerclip,liftthebottomoftheclipand

gentlypushdownonthecarabinerclipuntilitreleases.

Basic OperationFirst-time startup:1. Pressandholdthe PowerkeyuntiltheGarminlogo

appearsonthescreen.2. Starting the Colorado the first time requires you to choose

yourlanguage,timezone,andDaylightSavingmode.WhentheLanguagepageappears,highlightthepreferredlanguageandpressENTER.

3. HighlightthepreferredtimezoneandpressENTER.4. HighlightthepreferredDaylightSavingmodeandpress

ENTER.TheColoradothenshowstheMappage.5. TakeyourColoradotoanareawithaclearviewofthesky.6. IfthecursorontheMappageisblinking,waitforthe

Coloradotocollectsatellitedataandestablishitscurrentlocation.

7. To turn off the Colorado, press and hold the Powerkey.

Note: Youmustbeoutdoorswithaclearviewoftheskytoacquiresatellites.

WARNING:SeetheImportant Safety and Product Informationsheetintheproductboxforproductwarningsandotherimportantinformation.

Left soft key

Rock ‘n Roller

Right soft key

Color screen

Power key(backlight)

USB mini-B jack(under weather cap)

Battery coverMounting

spine

Latch

Power key(backlight)

Weather cap

USB mini-B jack(under weather cap)

External GPSantenna connector

(under weather cap)

ENTER key

Battery compartment

Battery cover

Latch

Language Time Zone Daylight Saving

Carabiner Mounted on Colorado

Carabiner clip

Rock ‘n Roller

Power key(backlight)

Power key(backlight)

190-00751-01_0A.indd2 10/19/200710:36:11AM