Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
FeaturesIndustry's Highest Accuracy | ±0.5% of Full ScaleNo K-Factor ProgrammingDisplay Rotates 360 DegreesEasy Installation | No Mounting Kits RequiredLarge Bright LED Digital DisplaySize Range ½" - 4"Password Protected SecurityTrue-Union DesignM12 Quick Disconnect
•••••••••
Applications
Parts TK Series
Chemical ProcessesWater UsageFilter | Strainer Change-OutScrubber | Gas StacksVisual Flow IndicationTotalizer - Batching
••••••
PVC PP PVDF
SERIES : TKS | TKP | TKMCONNECTION : SOC | NPT | Flange | Butt | DINSEALS : FPM | EPDM | FFKM
RoHSCompliant
1. Flow Controller2. Power Supply |10-30VDC3. Hall Sensor Technology4. Paddle Wheel5. Body | PVC | PP | PVDF*6. Tefzel® Paddle7. Zirconium Ceramic Rotor Pin | Bearings
* Note : CPVC Union Ends Available
Multi-Function Paddle Wheel Flow MeterTKS | TKP | TKM ROTATOR SERIES
Programming
DISPLAY ROTATES 360°
Zirconium Ceramic Rotor Pin & Bearings
On PaddleAssembly
Industry's Most AccurateLifetime WarrantyZirconium Ceramic | Rotor | Bearings
6 7
1
2
3
4
5
Truflo TK Series Paddle Wheel Flow Sensors are the industry's most accurate sensors that offer exceptional value with virtually no maintenance. The sensor measures liquid flow rates in full pipes and can be used in low pressure systems.
The Truflo TK sensors are offered in a PVC, PP and PVDF materials making this model highly versatile and chemically compatible to many liquid process solutions.
The TK Series is available in size 1/2"-4" and require no special fittings to install.
Specifications
See Temperature and Pressure Graphs for more information
GeneralOperating RangePipe Size RangeAccuracyRepeatabilityMin. Reynolds Number RequiredWetted MaterialsSensor BodyO-RingsRotor Pin & Bushings
Rotor | PaddleElectricalSupply VoltageMax. Temperature | Pressure Rating | Non-Shock
PVC
PP
PVDF
Operating TemperaturePVCPPPVDF
Standards and ApprovalsCE, FCC,RoHS compliant,
.98 to 33 ft/s½ to 4 in.
0.3 to 10 m/sDN15 to DN600
±0.5% of max. range @ 25 °C (77 °F)±0.5% of max. range @ 25 °C (77 °F)4500
PVC | PP | PVDFFKM (std) optional EPR (EPDM) or FFKMZirconium Ceramic
ETFE TEFZEL®
10-30VDC
180 psi @ 68 °F25 psi @140°F200 psi @ 68 °F25 psi @ 185 °F200 psi @ 68 °F100 psi @ 140 °F
12.5 bar @ 20 °C1.7 bar @ 60 °C14 bar @ 20 °C1.7 bar @ 85 °C12.5 bar @ 20 °C6.9 bar @ 60 °C
32 °F to 140 °F-4 °F to 185 °F-40 °F to 240 °F
0 °C to 60 °C-20 °C to 85 °C-40 °C to 95 °C
Multi-Function Paddle Wheel Flow MeterTKS | TKP | TKM ROTATOR SERIES
Product Selection Temperature | Pressure GraphsTypical Application
TKP ---- 25 ---- P ---- E ---- T ---- RS ---- M(1) (2) (3) (4) (5) (6) (7)
EXAMPLE
1. SERIESa) TKS = Relay + Pulseb) TKP = Flow Rate + Flow Total Pulsec) TKM = 4-20mA + Flow Rate + Flow Total Pulse
15 | (½") | 20 | (¾")25 | (1") | 40 | (1 ½")50 | (2") | 80 | (3") | 100 / (4")
P = PVCPP = PolypropylenePF = PVDF * CPVC Socket Unions Available
E = EPDM (Optional)F = FFKM (Optional) * FPM is Standard
S - Sch 80 SocT - NPTB - SDR11 ButtD - DINF - ANSI 150 lb
2. PIPE SIZE
3. BODY MATERIAL
4. SEALS*
5. END CONNECTIONS
6. RS = TKP Series (Only) with RS-485 MODBUS7. M = M12 - 2 Meters - Quick Disconnect (Option)
RoHSCompliant
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
.7
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
6.9
7.6
8.3
9.0
9.7
10.3
11.0
11.7
12.4
13.1
13.8
14.5(bar)(psi)
0-20 0 20 40 60 80 100
°F°C
-4 32 68 104 140 176 212
PVDF
Polypropylene
CVP
Note: The Pressure | Temperature graphs are specifically for the TK Flow Meter. During system design the specifications of all components must be considered. (Non-Shock)
Truflo TK SeriesFlow Meter
Truflo - Gauge / PulsationDampener
NC-25 Flow SensorFlow / No Flow
NC-30 SensorLiquid Level
Sensing throughPlastic Wall
Chemical Tank
3040
50
60
1020
0
1.510.5 bar
psi0
2 2.533.54
pump grump
VERTICAL
FSET
Flow Meter & TransmitterCV
SV
TKM OP2 FTM OP1 GPM
GPM
FTM
FSET
Flow Meter & TransmitterCV
SV
TKM OP2 FTM OP1 GPM
GPM
FTM