Tivoli Software Distributionpublib.boulder.ibm.com/tividd/td/sw_dist/GC32-0730... · Tivoli Software Distribution application (Software Package Editor, Command Line Interface, Distribution

Tivoli® Software DistributionMessages and CodesVersion 4.1 GC32-0730-00

Tivoli® Software DistributionMessages and CodesVersion 4.1 GC32-0730-00

Tivoli Software Distribution Messages and Codes, Version 4.1

Copyright Notice

© Copyright IBM Corporation 2000, 2001. All rights reserved. May only be used pursuant to a Tivoli Systems Software LicenseAgreement, an IBM Software License Agreement, or Addendum for Tivoli Products to IBM Customer or License Agreement. Nopart of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any computerlanguage, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without priorwritten permission of IBM Corporation. IBM Corporation grants you limited permission to make hardcopy or other reproductions ofany machine-readable documentation for your own use, provided that each such reproduction shall carry the IBM Corporationcopyright notice. No other rights under copyright are granted without prior written permission of IBM Corporation. The document isnot intended for production and is furnished “as is” without warranty of any kind. All warranties on this document are herebydisclaimed, including the warranties of merchantability and fitness for a particular purpose.

U.S. Government Users Restricted Rights—Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBMCorporation.

Trademarks

Tivoli, the Tivoli logo, AIX, Cross-Site, NetView, OS/2, OS/390, SecureWay, Tivoli Enterprise, Tivoli Enterprise Console, and TMEare trademarks or registered trademarks of International Business Machines Corporation or Tivoli Systems Inc. in the United States,other countries, or both.

Windows and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, orboth.

Other company, product, and service names may be trademarks or service marks of others.

Notices

References in this publication to Tivoli Systems or IBM products, programs, or services do not imply that they will be available inall countries in which Tivoli Systems or IBM operates. Any reference to these products, programs, or services is not intended toimply that only Tivoli Systems or IBM products, programs, or services can be used. Subject to valid intellectual property or otherlegally protectable right of Tivoli Systems or IBM, any functionally equivalent product, program, or service can be used instead ofthe referenced product, program, or service. The evaluation and verification of operation in conjunction with other products, exceptthose expressly designated by Tivoli Systems or IBM, are the responsibility of the user. Tivoli Systems or IBM may have patents orpending patent applications covering subject matter in this document. The furnishing of this document does not give you any licenseto these patents. You can send license inquiries, in writing, to the IBM Director of Licensing, IBM Corporation, North Castle Drive,Armonk, New York 10504-1785, U.S.A.

ISO 9001 Certification

This product was developed using an ISO 9001 certified quality system.

Certification has been awarded by Bureau Veritas Quality International (BVQI) (Certification No. BVQI - 92086/A).

BVQI is a world leader in quality certification and is currently recognized by more than 20 accreditation bodies.

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vWho Should Read This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Prerequisite and Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

What This Guide Contains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Conventions Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Accessing Publications Online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Ordering Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Providing Feedback about Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Chapter 1. General Messages (DIS:SENG:nnnn). . . . . . . . . . . . . . . . . . . . . . . . . . . 1Message Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Message Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 2. Activity Planner Messages (APM:nnnnnnX) . . . . . . . . . . . . . . . . . . 53Message Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Message Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

iiiTivoli Software Distribution Messages and Codes

iv Version 4.1

Preface

Tivoli® Software Distribution Messages and Codes provides details of all messagesgenerated by Tivoli Software Distribution, that are identified by a message code.

The messages are in two groups: those generated by the various sub-components of the mainTivoli Software Distribution application (Software Package Editor, Command Line Interface,Distribution engine, etc.), and those generated by the Activity Planner component.

Who Should Read This DocumentThis document is intended for system administrators, or others, who use Tivoli SoftwareDistribution, and who need to understand the meaning of the messages it issues.

Prerequisite and Related DocumentsTo use the information in this guide, you should be familiar with the following manuals:

¶ Tivoli Software Distribution User’s Guide

Provides concepts and procedures for daily software package operations.

¶ Tivoli Software Distribution Reference Manual

Provides detailed information about managing and distributing software from thecommand line interface (CLI), including information about editing software packagedefinition files.

¶ Tivoli Software Distribution Release Notes

Provides prerequisite, troubleshooting and late-breaking information about the product,as well as listing details of fixed and open defects in the product and its documentation.

¶ Tivoli Management Framework User’s Guide, Tivoli Enterprise™ Installation Guide,Tivoli Management Framework Planning for Deployment Guide, Tivoli ManagementFramework Maintenance and Troubleshooting Guide, and Tivoli ManagementFramework Reference Manual

Provide detailed information and procedures to manage the Tivoli environment from theTivoli desktop or the CLI, including information about configuring, maintaining, andtroubleshooting your Tivoli installation.

¶ Tivoli Inventory User’s Guide

Provides detailed information about managing hardware and software using TivoliInventory.

¶ Tivoli Enterprise Console® User’s Guide and Tivoli Enterprise Console Adapters Guide

Provides detailed information about integrating network, systems, database, andapplication management with Tivoli Enterprise Console.

What This Guide ContainsTivoli Software Distribution Messages contains the following sections:

¶ “General Messages (DIS:SENG:nnnn)” on page 1

Provides details of the messages generated by the various sub-components of the mainTivoli Software Distribution application (Software Package Editor, Command LineInterface, Distribution engine, etc.)

vTivoli Software Distribution Messages and Codes

¶ “Activity Planner Messages (APM:nnnnnnX)” on page 53

Provides details of the messages generated by the Application Manager component

Conventions Used in This GuideThe guide uses several typeface conventions for special terms and actions. Theseconventions have the following meaning:

Bold Lowercase or mixed-case commands, command options in a syntaxstatement, the names of objects in procedures that you type, select, click, orpress, or any other information that you must use literally appear like this,in bold.

Italics Variables, new terms, and words and phrases that are emphasized appear likethis, in italics.

Monospace Code examples, output, and system messages appear like this, in amonospace font.

References in this guide to other documents, in the Tivoli Software Distribution library orother libraries, do not carry version numbers, unless a specific down-level version isreferenced. The latest version is assumed in all such references.

Accessing Publications OnlineThe Tivoli Customer Support Web site (http://www.tivoli.com/support/) offers a guide tosupport services (the Customer Support Handbook); frequently asked questions (FAQs); andtechnical information, including release notes, user’s guides, redbooks, and white papers.You can access Tivoli publications online at http://www.tivoli.com/support/documents/.The documentation for some products is available in PDF and HTML formats. Translateddocuments are also available for some products.

To access most of the documentation, you need an ID and a password. To obtain an ID foruse on the support Web site, go to http://www.tivoli.com/support/getting/.

Resellers should refer to http://www.tivoli.com/support/smb/index.html for moreinformation about obtaining Tivoli technical documentation and support.

Business Partners should refer to “Ordering Publications” for more information aboutobtaining Tivoli technical documentation.

Ordering PublicationsOrder Tivoli publications online athttp://www.tivoli.com/support/Prodman/html/pub_order.html or by calling one of thefollowing telephone numbers:

¶ U.S. customers: (800) 879-2755

¶ Canadian customers: (800) 426-4968

Preface

vi Version 4.1

Providing Feedback about PublicationsWe are very interested in hearing about your experience with Tivoli products anddocumentation, and we welcome your suggestions for improvements. If you have commentsor suggestions about our products and documentation, contact us in one of the followingways:

¶ Send e-mail to [email protected].

¶ Fill out our customer feedback survey at http://www.tivoli.com/support/survey/.

Contacting Customer SupportThe Tivoli Customer Support Handbook at http://www.tivoli.com/support/handbook/provides information about all aspects of Tivoli Customer Support, including the following:

¶ Registration and eligibility.

¶ How to contact support, depending on the severity of your problem.

¶ Telephone numbers and e-mail addresses, depending on the country you are in.

¶ What information you should gather before contacting support.

Preface

viiTivoli Software Distribution Messages and Codes

Preface

viii Version 4.1

General Messages (DIS:SENG:nnnn)

This chapter contains details of the messages generated by the Tivoli Software DistributionCommand Line (displayed) and GUI (written to the log file).

Message FormatThe general Tivoli Software Distribution messages have the following format:DIS:SENG:nnnn

where the parts of the message are as follows:

DIS The Tivoli Software Distribution product identifier

SENG The identifier for the core Tivoli Software Distribution application, sometimesknown as the ″engine″

nnnn A unique numeric identifier

Message DetailsThe message details are as follows:

DIS:SENG:0001 Operation successful.

Explanation: The performed operation has been successfullycompleted.

System Action: Operation completed.

Operator Response: None

DIS:SENG:0002 Operation successful. Reboot is required.

Explanation: The performed operation has been successfullysubmitted. To complete the operation, reboot the system.

System Action: Processing continues.

Operator Response: To complete the operation, reboot theoperating system.

DIS:SENG:0003 Warning: Operation may not succeed.Check the message log.

Explanation: The operation has been completed but somewarnings appear in the message log.


Operator Response: Check the log files.

DIS:SENG:0004 Operation unsuccessful: Temporaryfailure.

Explanation: The operation cannot be completed because of atemporary problem (for example, the system tried to access alocked file).

System Action: Operation failed.

Operator Response: Analyze the log files, correct thetemporary problem, and run the command again.

DIS:SENG:0005 Operation unsuccessful.

Explanation: The requested operation cannot be successfullycompleted.


Operator Response: Check the log files for more information.

DIS:SENG:0006 Operation unsuccessful: Fatal failure.

Explanation: The operation cannot be completed because ofan internal error (for example, a memory allocation failure).


1

1Tivoli Software Distribution Messages and Codes

1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

Operator Response: Check the log files. If the problempersists, collect trace information and, if necessary, contactTivoli Customer Support.

DIS:SENG:0007 Usage: wdcrtsp [-s] [-o] [-f spfile_path]target_path

Explanation: Usage of the wdcrtsp command.

System Action: Command failed.

Operator Response: Run the command again, specifying thecorrect syntax.

See: Tivoli Software Distribution Reference Manual

DIS:SENG:0008 Usage: wdinstsp [-p] |[-n spname.spver] |[[-f][-R{y/n}] [-D variable=value]... [-ty|n|o [-c y|n|o|r]] [-u y|n|o|u [-a]]]spblock_path

Explanation: Usage of the wdinstsp command.




DIS:SENG:0009 Usage: wdrmsvp [-f] [-R {y/n}][-Dvariable=value]... [-t y|n|o| [-c y|n|o|r]] [-uy|n|o|u [-a]] {{-S| -s} spname_path |spname.version}

Explanation: Usage of the wdrmvsp command.




DIS:SENG:0010 Usage: wdundosp[-f] [-R {y/n}][-t y|n|o [-cy|n|r]] spname.spver

Explanation: Usage of the wdundosp command.




DIS:SENG:0011 Usage: wdacptsp spname.spver

Explanation: Usage of the wdacptsp command.




DIS:SENG:0012 Usage: wdcmmtsp [-R {y/n}] [-c y|n|o|r]spname.spver

Explanation: Usage of the wdcmmtsp command.




DIS:SENG:0013 Usage: wdversp spname.spver

Explanation: Usage of the wdversp command.




DIS:SENG:0014 Usage: wdexptsp [[-o] [-b] -f export_file]{{-s| -S} spname_path | spname.version}

Explanation: Usage of the wdexptsp command.




DIS:SENG:0015 Usage: wdbldspb [-o] sp_pathspblock_path

Explanation: Usage of the wdbldspb command.




DIS:SENG:0007 • DIS:SENG:0015

2 Version 4.1

DIS:SENG:0016 Error: Illegal value ‘value’ for option‘option’.

Explanation: An incorrect value has been used for thespecified option of the performed command.

Message Variables:value Command line option for the performed command.option Value for the specified option.

System Action: Processing was interrupted.

Operator Response: Check the command usage and run thecommand again.

DIS:SENG:0017 Error: Illegal combination of operationoptions.

Explanation: Two or more options for the performedoperation are not compatible.


Operator Response: Check the command usage and run thecommand again.

DIS:SENG:0018 Error: State of package ‘softwarepackage’ is in error.

Explanation: The status of the specified software package iserror (E). The performed operation cannot be performed on apackage in the error state.

Message Variables:software package

Name of the software package on which the operationis performed.


Operator Response: Run the operation again with the forceoption, or try to repair the software package.

DIS:SENG:0019 Illegal format of version ‘version’ orstring too long.

Explanation: The format used for the version number of thespecified package is not valid or is too long. The versionnumber can contain up to 16 alphanumeric characters and isseparated into substrings using periods, which are included inthe calculation of the string length: an example is ‘3.1.5b’,which has a length of 6 characters.

Message Variables:version Version number of specified package.


Operator Response: Change the format of the versionnumber and try the operation again.

DIS:SENG:0020 File or directory ‘path’ not found.

Explanation: The system is not able to find the specifiedpath.

Message Variables:path Path name of a source file or directory.

System Action: Operation may or may not succeed.

Operator Response: Check the log files to determine if this isan error or a warning message.

DIS:SENG:0021 File or directory ‘path’ already exists.

Explanation: An object with the specified path already exists.

Message Variables:path Path name of a valid file or directory.


Operator Response: Check the log files to determine if this isan error or a warning message.

DIS:SENG:0022 Error: Creating object name object.

Explanation: An internal error occurred while creating thespecified software package object.

Message Variables:object name

Name of the software packet object the system isattempting to create.



DIS:SENG:0023 Software package block ID isname.version.

Explanation: The software package block created by theperformed operation is identified by the specified name andversion number.

Message Variables:name.version

Name and version of the software package blockcreated.


Operator Response: None.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0024 Unable to open the file path. Errornumber: error. Check if the specified fileand path exist.

Explanation: The system is unable to open the specified file.The resulting error number is shown.

Message Variables:path Path name of the file the system is attempting to

open.error Error number returned by the system call.



DIS:SENG:0025 Unable to create the path path. Errornumber: error.

Explanation: The system is unable to create the specified file(for example, because the file system on the target is full). Theresulting error number is shown.

Message Variables:path Path name of the file the system is attempting to

create.error Error number returned by the system call.


Operator Response: Check if the required space is availableon the target. Check the log files for more information, then trythe operation again.

DIS:SENG:0026 Software package name.version was notfound in the catalog.

Explanation: The specified software package is not present inthe catalog.


Name and version number of the software package onwhich the operation is performed.


Operator Response: Check the name and run the commandagain.

DIS:SENG:0027 Error: Memory allocation failure.

Explanation: An internal error occurred during memoryaccess operations.



DIS:SENG:0028 The requested operation is not allowedfor the software package name.version.

Explanation: The state of the package does not allow therequested operation.




Operator Response: Run an appropriate operation for apackage in this state.


DIS:SENG:0029 Current software package status is‘status’.

Explanation: Displays the current status of the softwarepackage.

Message Variables:status A valid status of the package (for example, IC---).

System Action: None.


DIS:SENG:0030 Software package name.version is not in afinal status.

Explanation: The requested operation cannot be performedbecause the status of the software package is not a final one,that is, a package with the last digit of status C.




Operator Response: Check the log files to determine if theprevious operation completed and if another operation, such asa reboot, is required.

DIS:SENG:0031 Error: Failure importing softwarepackage file ‘path’.

Explanation: An error occurred during the encoding ordecoding of the .sp (not-built) file or .spb (built) file.

Message Variables:path Path name of the input software package definition

file.




4 Version 4.1

DIS:SENG:0032 Error: Host ‘hostname’ for softwarepackage ‘software package name’ is not amanaged node. Operation requires amanaged node host.

Explanation: The requested operation needs a managed nodeas a target or source host.

Message Variables:hostname

Name of the target or source host in the policy region.software package name

Name of the submitted software package.


Operator Response: Specify a valid managed node and trythe operation again.

DIS:SENG:0033 Error: Cannot create temporary file‘path’.

Explanation: The system is not able to create a temporary orbackup file in the service area.

Message Variables:path Path name of the temporary or backup file to be

created.


Operator Response: Check for space availability in theservice area or the existence of a file with the same name, thentry the operation again.

DIS:SENG:0034 Error: Ignore option is not specified andthe check operation detects that thesubmitted operation is not allowed forone or more targets (the input packagestatus related to one or more targets doesnot allow the submitted operation).

Explanation: The performed check operation detects thatthere are targets for the requested operation that are not valid.Because the option for ignoring bad targets is not specified, theoperation will fail.


Operator Response: Specify the ignore bad targets option andtry the operation again.

DIS:SENG:0035 Error: No target is specified or no targetqualifies for the operation. Check the logfile for further information.

Explanation: There are no targets available for the requestedoperation. Not all the targets are valid or no target is specified.


Operator Response: Specify a valid target and try theoperation again.

DIS:SENG:0036 The software package ‘software packagename’ does not reside on any policyregion. The software package may havebeen moved to the lost-n-found collectionbecause one or more of the softwarepackage’s source host, log host, or nestedsoftware packages was removed orinvalid. The software package must bemoved from lost-n-found to a policyregion before it can be used.

Explanation: See message.

Message Variables:software package name

Name of the software package.


Operator Response: Move the software package from thelost-n-found collection using the wmvspobj command and trythe operation again.


DIS:SENG:0037 A software package named ‘softwarepackage name’ was created in policyregion ‘policy region’, profile manager‘profile manager name’.



Name of the software package.policy region

Name of the policy region.profile manager name

Name of the profile manager.



DIS:SENG:0038 Error: Invalid mode (type) ‘mode’,inconsistent with an option alreadyspecified (‘option’).

Explanation: The specified operation mode is in conflict witha previously specified option.

Message Variables:type Type of mode (for example, cmop).mode Mode of the operation.option Valid command option.


Operator Response: Specify a valid operation mode and trythe operation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0039 Error: Unsupported distribution service(distribution service).

Explanation: The specified distribution service is notcurrently supported.

Message Variables:distribution service

Type of distribution service.


Operator Response: Specify a supported distribution serviceand try the operation again.

DIS:SENG:0040 The source host for software package‘package’ in policy region ‘region’, profilemanager ‘profile manager’, has beenchanged from ‘source host1’ to ‘sourcehost2’.


Message Variables:package Name of software packageregion Name of policy region.profile manager

Name of profile manager.source host1

Name of original source host.source host2

Name of revised source host.



DIS:SENG:0041 Error: Creating ‘object type’ object, errorcode ‘error’.

Explanation: Errors occurred during the creation of thespecified object (for example, creation of output channels). Thecreation failed with the specified error code.

Message Variables:object type

Type of object to be created (for example,array_output_channel or file_output_channel).

error The error code returned.



DIS:SENG:0042 Operation not allowed for the softwarepackage name.version that is waiting for areboot.

Explanation: The requested operation is not allowed for thespecified software package because the package is in anon-final status: it is waiting for a reboot.


Name and version number of a valid softwarepackage.


Operator Response: Check the log files to determine if theprevious operation has completed and if another operation, suchas a reboot, is required.

DIS:SENG:0043 Invalid conversion to software packageformat. Software package ‘softwarepackage name’ has not yet been built.

Explanation: The requested conversion to the .sp formatcannot be performed until the software package has been built.




Operator Response: Build the software package block, thenconvert it to the .sp format.

DIS:SENG:0044 Invalid conversion to software packageblock format. Software package ‘softwarepackage name’ has already been built to ablock format.

Explanation: The requested conversion to the .spb formatcannot be performed because the software package has alreadybeen built.





DIS:SENG:0045 Software package operation failed. Errormessage: message text.

Explanation: The performed software package operationfailed.

Message Variables:message text

Text of the message.


Operator Response: Consult the operator response of thereferenced message for the appropriate action to take.


6 Version 4.1

DIS:SENG:0046 ‘Operation type’ operation on softwarepackage ‘software package name’ in policyregion ‘policy region name’ failed policyvalidation (validation method ‘method’).

Explanation: The specified operation on the named softwarepackage did not pass policy validation. The specified method ofvalidation rejects the operation.

Message Variables:operation type

Type of operation to be performed on a valid softwarepackage.

software package nameName of a valid software package.

policy region nameName of the policy region in which the operation willbe performed.

method Validation method used to perform policy validation.


Operator Response: Check the validation method and try theoperation again.

DIS:SENG:0047 Attempt to set name to ‘new name’ forsoftware package ‘package’ in policyregion ‘region’ failed policy validation(validation method ‘method’).

Explanation: The attempt to set the specified new name forthe named software package did not pass policy validation. Thespecified method of validation rejects the operation.

Message Variables:new name

New name of the software package.package Original name of the software package.region Name of the policy region.method Name of the validation method.



DIS:SENG:0048 Attempt to set the source host to ‘hostname’ for software package ‘softwarepackage name’ in policy region ‘policyregion name’ failed policy validation(validation method ‘method’).

Explanation: The attempt to set the specified source host forthe named software package did not pass policy validation. Thespecified method of validation rejects the operation.

Message Variables:host name

Name of a source host name to be used for specifiedsoftware package.


policy region nameName of the policy region in which the operation isto be performed.




DIS:SENG:0049 Attempt to delete or change source host‘host name’ for software package‘software package name’ in policy region‘policy region name’ failed policyvalidation (validation method ‘method’).

Explanation: The attempt to change or delete the specifiedsource host for the named software package did not pass policyvalidation. The specified method of validation rejects theoperation.


Name of a source host name to be used for specifiedsoftware package.


policy region nameName of the policy region in which the operation isto be performed.




DIS:SENG:0050 Attempt to set the properties of softwarepackage ‘software package name’ in policyregion ‘policy region name’ failed policyvalidation (validation method ‘method’).

Explanation: The attempt to set the properties for thespecified software package did not pass policy validation. Thespecified method of validation rejects the operation.


Name of a valid software package.policy region name

Name of the policy region in which the operation isto be performed.






1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0051 Attempt to set the corequisites forsoftware package ‘software package name’in policy region ‘policy region name’failed policy validation (validation method‘method’).

Explanation: The attempt to set the corequisites for thespecified software package did not pass policy validation. Thespecified method of validation rejects the operation.







DIS:SENG:0052 Attempt to use the default policy forsource host (policy default method‘method’) for software package ‘softwarepackage name’ in policy region ‘policyregion name’ failed.

Explanation: The script used for the default policy failed.

Message Variables:method Default policy method.software package name




Operator Response: Check the default policy and try theoperation again.

DIS:SENG:0053 The source host ‘host name’ returned bythe ‘sp_def_src_host’ default policymethod is not a valid Tivoli managednode.



Name of the source host for a valid software package.


Operator Response: Check the host name and try theoperation again.

DIS:SENG:0054 Attempt to use the default policy forproperties (policy default method‘method’) for software package ‘softwarepackage name’ in policy region ‘policyregion name’ failed.



Valid software package.policy region name

Policy region in which the operation is to beperformed.



DIS:SENG:0055 Attempt to use the default policy forcorequisites (policy default method‘method’) for software package ‘softwarepackage name’ in policy region ‘policyregion name’ failed.



Valid software package.policy region name

Policy region in which the operation is to beperformed.



DIS:SENG:0056 Properties returned by the‘sp_def_properties’ default policy methodare not in the correct format(‘properties’).


Message Variables:properties

String of default properties.


Operator Response: Check the default policy method and trythe operation again.

See: Tivoli Management Framework Reference Manual


8 Version 4.1

DIS:SENG:0057 The ‘sp_def_properties’ default policymethod returned an unsupportedsoftware package property (‘properties’).


Message Variables:properties

String of default properties.


Operator Response: Check the default policy method and trythe operation again.

DIS:SENG:0058 No source host was specified. A softwarepackage must have a source host.



Operator Response: Specify a valid source host and try theoperation again.

DIS:SENG:0059 Usage: wimpspo [-c profile_manager] [-hsrc_host] [-f [input_node:]inputfile_path |-r] [-t build [-o] -p dest_sppath][sp_name]

Explanation: Usage of the wimpspo command.




DIS:SENG:0060 Error: Host ‘host name’ is neither amanaged node nor an endpoint.

Explanation: The specified host cannot be used for therequested operation since it is neither a managed node nor anendpoint.


Name of the host to be used for the requestedoperation.


Operator Response: Check the host name and try theoperation again.

DIS:SENG:0061 Invalid file specification ‘file spec’.

Explanation: A file specification has been used that is notvalid.

Message Variables:file spec File specification string.


Operator Response: Specify a valid file specification and trythe operation again.

DIS:SENG:0062 The specified profile manager ‘profilename’ was not found.

Explanation: A profile manager with the specified name doesnot exist.

Message Variables:profile name

Profile manager name.


Operator Response: Specify a valid profile manager and trythe operation again.

DIS:SENG:0063 The software package object ‘softwarepackage object’ already exists.

Explanation: A software package object with the specifiedname already exists.

Message Variables:software package object

Name of a valid software package object.


Operator Response: Specify another valid software packageobject name and try the operation again.

DIS:SENG:0064 The software package object ‘softwarepackage object’ does not exist.

Explanation: A software package object with the specifiedname does not exist.

Message Variables:software package object

Name of a software package object.


Operator Response: Check that the software package existsand has a valid name.

See: Description of the wlookup command in the TivoliManagement Framework Reference Manual



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0065 Unsupported callback method ‘methodname’.

Explanation: An internal error occurred while distributing thepackage.

Message Variables:method name

Name of internal method that was not valid.



DIS:SENG:0066 Software package operations succeeded.Warning message: ‘message text’.

Explanation: Software package operations succeeded, butsome warning messages were displayed.

Message Variables:message text

Text of the returned warning message.

System Action: Operation completed and a warning messagewas generated.

Operator Response: Check the warning messages and takeany appropriate action.

DIS:SENG:0067 Invalid change management operationtype ‘operation type’.

Explanation: An internal error occurred while a changemanagement operation was performing.

Message Variables:operation type

Change management operation type



DIS:SENG:0068 Usage: wconvspo [-t {build [-o] -pdest_sppath}| -d download_path]spobj_name

Explanation: Usage of the wconvspo command.




DIS:SENG:0069 Usage: winstsp [-d @[SoftwarePackage:]spobj_name] [[[-p][-m a|s|r | [-Dmacro=value...][-f] [-I]-i[-v]][-R {y/n}] [-ty|n|o] [-c y|n|o|r]] [-u y|n|o|u] [-a]] [-lmdist2_token=value...]]] [-Tsubscribers_file]... @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the winstsp command.



See: Tivoli Software Distribution Reference Manual.

DIS:SENG:0070 ‘resource name’ is neither the name ofprofile manager nor the name of aresource that is capable of receiving asoftware package distribution. The nameyou provide must be a fully specifiedname (starting with ’@’) or a namerelative to the current working collection.


Message Variables:resource name

The name used as target during a software packagedistribution.


Operator Response: Specify the valid name of a profilemanager or other resource that can receive a software packagedistribution, then try the operation again.

DIS:SENG:0071 ‘subscriber name’ is not currently asubscriber of the profile manager thatcontains software package ‘softwarepackage name’.

Explanation: You specified a subscriber that is not part of theprofile manager in which the software package has beenimported.

Message Variables:subscriber name

A valid subscriber name.software package name

A valid software package name.


Operator Response: Add the subscriber to the profilemanager or set the lenient distribution option and try theoperation again.


10 Version 4.1

DIS:SENG:0072 List of targets on which the requestedoperation cannot be submitted: targets.

Explanation: The requested operation cannot be submitted onall specified targets. The targets where it has not beensubmitted are listed.

Message Variables:targets List of targets on which the submitted operation

failed.

System Action: Operation completed successfully on alltargets except for those listed.

Operator Response: Check the log files and take anyappropriate action.

DIS:SENG:0073 The operation can be submitted on all therequested targets.

Explanation: Check was successful on all the requestedtargets.



DIS:SENG:0074 Operation successfully submitted.Distribution ID is ID key.

Explanation: The requested operation has been successfullysubmitted. The identification key for the operation is shown.

Message Variables:ID key Distribution identification key.



DIS:SENG:0075 Warning: Software package object is inblock format. The requested operationacts on all the files already contained init.

Explanation: You performed an operation on a softwarepackage block (built format) with the source or any optionsspecified.



DIS:SENG:0076 Usage: wremovsp [[-R {y/n}] [-Dmacro=value]... [-f] [-I | -i [-v]] [-t y|n|o [-cy|n|o|r]] [-u y|n|o|u] [-a]] [-lmdist2_token=value]...]] [-Tsubscribers_file] @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the wremovsp command.




DIS:SENG:0077 Usage: wundosp [-i [-v]| -I][-R {y/n}] [-ty|n|o [-c y|n|o|r]] [-l mdist2_token=value...][-T subscribers_file] @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the wundosp command.




DIS:SENG:0078 Usage: waccptsp [-i[-v] | -I] [-lmdist2_token=value...] [-Tsubscribers_file] @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the waccptsp command.




DIS:SENG:0079 Usage: wcommtsp [-i[-v] | -I] [-R {y/n}][-c y|n|o|r] [-l mdist2_token=value...] [-Tsubscribers_file] @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the wcommtsp command.




DIS:SENG:0080 Usage: wversp [-l mdist2_token=value...][-T subscribers_file] @[SoftwarePackage:]spobj_name [subscribers...]

Explanation: Usage of the wversp command.






1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0081 Usage: autopack {-f [-l drive_to_scan] | -s| -d [-n sp_name] [-v sp_version] [-psp_file] [-b]}

Explanation: Usage of the autopack command.




DIS:SENG:0082 Error decoding software package object.It could be corrupted, or not a validobject.

Explanation: An error occurred while reading entries from thesoftware package or software package block.


Operator Response: Check the integrity of the file, forexample, by re-importing the software package or rebuildingthe software package block.

DIS:SENG:0083 This message is no longer used.




DIS:SENG:0087 Error: Could not get return result fromtarget ‘target ref’.

Explanation: An internal error occurred during thedistribution. The result of the distribution could not be receivedfrom one or more targets.

Message Variables:target ref

Target object name



DIS:SENG:0088 Unable to add Windows Shell folder ‘shellfolder’ on path ‘path’.


Message Variables:shell folder

Name of the Windows® shell folder.path Path to which Windows shell folder is to be added.


Operator Response: Check that the specified path or file isnot read-only and try the operation again.

DIS:SENG:0089 Unable to delete Windows Shell folder‘shell folder’ from path ‘path’.



Name of the Windows shell folder.path Path from which Windows shell folder is to be

deleted.


Operator Response: Check that the specified path or file isnot read-only or locked and try the operation again.

DIS:SENG:0090 Unable to add Windows Shell shortcut‘shell shortcut’ to folder ‘path’.


Message Variables:shell shortcut

Name of the Windows shell shortcut.path Path to which Windows shell shortcut is to be added.


Operator Response: Check that the specified path is notread-only and try the operation again.

DIS:SENG:0091 Unable to delete Windows Shell shortcut‘shell shortcut’ from folder ‘path’.



Name of the Windows shell shortcut.path Path from which Windows shell shortcut is to be

deleted.


Operator Response: Check that the specified path or file isnot read-only or locked and try the operation again.

DIS:SENG:0092 Unable to write or create Windows Shellfolder ‘shell folder’.



Name of the Windows shell folder.


Operator Response: Check the shell folder name and try theoperation again.


12 Version 4.1

DIS:SENG:0093 Unable to read Windows Shell folder‘shell folder’ on path ‘path’.



Name of the Windows shell folder.path Path from which Windows shell folder is to be read


Operator Response: Check that the path is valid and try theoperation again.

DIS:SENG:0094 Unable to read Windows Shell shortcut‘shell shortcut’ on path ‘path’.



Name of the Windows shell shortcut.path Path from which Windows shell shortcut is to be read.


Operator Response: Check that the path is valid and try theoperation again.

DIS:SENG:0095 Syntax error at line line number:Expected keyword and found ‘wrongkeyword’.

Explanation: The specified keyword (at the indicated linenumber) is not allowed.

Message Variables:line number

Number of the line in the section of the softwarepackage definition (SPD) file in which the badkeyword was found.

wrong keywordInvalid SPDF keyword.


Operator Response: Check the syntax of the SPD file andlook for any keywords that are not valid.

DIS:SENG:0096 Syntax error: Unexpected end of file.

Explanation: One or more end statements in the softwarepackage definition file are missing.


Operator Response: Check the syntax of the SPD file(specifically, the number of end statements) and try theoperation again.

DIS:SENG:0097 Syntax error: Invalid drive value ‘label’.

Explanation: You specified a drive label that is not valid orthat is in the wrong format.

Message Variables:label System drive label.


Operator Response: Specify a valid drive label and try theoperation again.

DIS:SENG:0098 Corequisite files are not supported for thephase name program.

Explanation: You have specified to include some corequisitefiles during a phase when they are not allowed, for example,the cleanup or backup phase.

Message Variables:phase name

Program phase (for example, cleanup or backupphase).


Operator Response: Either remove the use of corequisite filesor change the phase, as appropriate.


DIS:SENG:0099 Syntax error near line line number:Missing one or more of the mandatorykeywords for the object name object: listof keywords.

Explanation: An error occurred in the stanza ending at theindicated line number.


Line number of the section of the software packagedefinition file in which one or more of the mandatorykeywords are missing.

object nameName of the software package definition file object(for example, add directory) for which mandatorykeywords are missing.

list of keywordsList of missing mandatory keywords.


Operator Response: Edit the software package definition file,adding in the specified object stanza the missing mandatorykeywords with valid arguments.




1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0100 Windows Program Group display_name‘name’ is more than 40 characters.

Explanation: The specified name exceeds the allowed length.

Message Variables:name Display name of the Windows program group.


Operator Response: Specify a name with a length of 40characters or fewer and try the operation again.

DIS:SENG:0101 The Windows Profile file ‘path’ cannot bewritten.


Message Variables:path Path name of the Windows profile file.


Operator Response: Check that the target host is runningWindows, that the specified path name is valid, and that the fileis not a read-only file. Try the operation again.

DIS:SENG:0102 The Windows Profile file ‘path’ cannot becreated because the destination drive doesnot exist.

Explanation: You attempted to create a Windows profile fileon a destination drive that does not exist.

Message Variables:path Path name of the Windows profile file.


Operator Response: Specify a valid destination drive and trythe operation again.

DIS:SENG:0103 The Windows Profile section ‘section’cannot be created on file ‘path’.

Explanation: You attempted to create a Windows Profilesection in a read-only file.

Message Variables:section Name of the Windows profile section to be created.path Path name of a valid Windows profile file.


Operator Response: Check that the specified file is notread-only and try the operation again.

DIS:SENG:0104 The Windows Profile section ‘section’cannot be removed on file ‘path’.

Explanation: You attempted to remove a Windows Profilesection from a read-only file.

Message Variables:section Name of the Windows profile section to be removed.path Path name of a valid Windows profile file.



DIS:SENG:0105 The Windows Profile item ‘item’ cannotbe created on section ‘section’.

Explanation: You attempted to create a Windows Profile itemin a section of a read-only file.

Message Variables:item Name of the item in a Windows profile section to be

created.section Name of the Windows profile section in which the

item must be created.



DIS:SENG:0106 The Windows Profile item item cannot beremoved from section section.

Explanation: You attempted to remove a Windows Profileitem from a section of a read-only file.

Message Variables:item Name of the item in a Windows profile section to be

removed.section Name of the Windows profile section from which the

item must be removed.



DIS:SENG:0107 The Windows Registry key ‘key’ cannotbe created on the registry path ‘path’.

Explanation: You attempted to create a Windows registry keyin a section of a read-only file.

Message Variables:key Name of the Windows registry key to be created.path Path name of the registry section in which the key

must be created.




14 Version 4.1

DIS:SENG:0108 The Windows Registry key ‘key’ cannotbe removed on the registry path ‘path’.

Explanation: You attempted to remove a Windows registrykey from a section of a read-only file.

Message Variables:key Name of the Windows registry key to be removed.path Path name of the registry section from which the key

must be removed.



DIS:SENG:0109 The Windows Registry value ‘value’cannot be created on the registry key‘key’.

Explanation: You attempted to create a Windows registryvalue on a registry key in a read-only file.

Message Variables:key Name of a valid Windows registry key.value Value for the registry key to be created.



DIS:SENG:0110 The Windows Registry value ‘value’cannot be removed on the registry key‘key’.

Explanation: You attempted to remove a Windows Registryvalue from a registry key in a read-only file.

Message Variables:key Name of a valid Windows registry key.value Value for the registry key to be removed.



DIS:SENG:0111 Unable to remove the path path. Errno:error number.

Explanation: You attempted to remove a path that isread-only.

Message Variables:path Path name of the file system object to be removed.error number

System error number.



DIS:SENG:0112 Unable to rename file path. Errno: errornumber.

Explanation: You attempted to rename a path that isread-only.

Message Variables:path Path name of the file system object to be renamed.error number




DIS:SENG:0113 Error: Move from file source path todestination path failed.

Explanation: You attempted to move a path that is read-only.

Message Variables:source path

Source path name.destination path

Destination path name.



DIS:SENG:0114 Error: Preparation for move from filesource path to destination path at rebootfailed.

Explanation: After the reboot, Tivoli Software Distributiontried to move data from the staging area to the active area andfailed.

Message Variables:source path

Source path name.destination path

Destination path name.


Operator Response: Check the log files and try the operationagain.

DIS:SENG:0115 You do not have read permission for thepath path.


Message Variables:path Path name of a valid file system object.


Operator Response: Check the permissions of the path andtry the operation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0116 Warning: File path is locked.




Operator Response: Try to perform the same operation intransactional mode.

DIS:SENG:0117 Unable to get attributes on path path.Errno: error number.


Message Variables:path Path name of a valid file system object.error number



Operator Response: Check that the specified path exists andis valid.

DIS:SENG:0118 Unable to set attributes on path path.Errno: error number.


Message Variables:path Path name of a valid file system object.error number




DIS:SENG:0119 Error: The path path is not a file: it is adirectory.

Explanation: A file and directory may exist that have thesame name.



Operator Response: Check the name and try the operationagain.

DIS:SENG:0120 Error: The path path is not a directory: itis a file.

Explanation: A file and directory may exist that have thesame name.



Operator Response: Check the name and try the operationagain.

DIS:SENG:0121 This is not a UNIX platform. Links donot exist.

Explanation: You attempted to define links in a platform thatdoes not support links.


Operator Response: Use a condition to exclude this operationon non-UNIX® systems and try the operation again.

DIS:SENG:0122 Unable to create the link name fromsource path.


Message Variables:name Name of the link to be created.path Path name of the source file system object for the

link.


Operator Response: Check that the source path exists and trythe operation again.

DIS:SENG:0123 Unable to execute or complete executionof program name.


Message Variables:name Name of a valid executable file.


Operator Response: Check the log files and rerun theprogram.

DIS:SENG:0124 Not enough space available on drive.Required: required space.

Explanation: You attempted to install a software package on adrive with insufficient space available.

Message Variables:drive Label of a valid system drive.required space

Total number of GB, MB, KB, or (default) bytesrequired by the user in the check_disk_space_stanzaof the SPD file.



16 Version 4.1

Operator Response: Obtain the required amount of diskspace on the specified drive and try the operation again.

DIS:SENG:0125 Error writing file path.


Message Variables:path Path name of the file to be written.



DIS:SENG:0126 Error: A file with the same name alreadyexists in area path.


Message Variables:path Path to the service area.


Operator Response: Check the path and try the operationagain.

DIS:SENG:0127 Error: Unable to remove link name.


Message Variables:name Name of the link to be removed.



DIS:SENG:0128 Error: Wrong return code for programname.

Explanation: The return code of the executed program is notvalid.

Message Variables:name Name of a valid executable.


Operator Response: Check the log files and run the programagain.

DIS:SENG:0129 Invalid format of version ‘versionnumber’ or string too long.

Explanation: The version number should be expressed in theformat x.x.x, which is a series of one to three numeric stringsseparated by a period.

Message Variables:version number

Version number of the software package profile.


Operator Response: Specify a valid version number and trythe operation again.

DIS:SENG:0130 Error: Condition ‘condition’ cannot beevaluated.

Explanation: When evaluating the condition, logical errorswere found.

Message Variables:condition

Valid logical condition.


Operator Response: Check the syntax and operand type ofthe condition and try the operation again.

DIS:SENG:0131 Error: Condition ‘condition’ on thepackage is false. The operation on thepackage cannot be executed.

Explanation: The condition that applies to the entire softwarepackage is false, so the operation will not execute.

Message Variables:condition

Valid logical condition.

System Action: Operation not performed. The changemanagement state will not be changed to the error state.


DIS:SENG:0132 Warning: The following targets are notyet scanned using Tivoli Inventory. Therewill be no information logged in thedatabase for these targets:



Operator Response: None. In order to have information onthe listed targets logged in the database, scan them using TivoliInventory.

DIS:SENG:0133 Error: Invalid Policy Region region]

Explanation: An incorrect policy region name has been used.

Message Variables:region Name of the policy region.


Operator Response: Supply a valid policy region name andtry the operation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0134 Creating query library name in policyregion.


Message Variables:name Name of the Tivoli Inventory query library.policy region

Name of the policy region.



DIS:SENG:0135 Creating query SWDISTDATA_QUERYin library name.


Message Variables:library name

Name of the Tivoli Inventory query library



DIS:SENG:0136 Error: Failure to obtain attributeinformation on ‘name’.

Explanation: You attempted to run the wgetspat command,but no attributes were retrieved.

Message Variables:name Name of a valid software package.


Operator Response: Check the software package name andtry the operation again.

DIS:SENG:0137 The software package ‘name’ contains aninvalid source host (‘source host’).

Explanation: The source host attribute has been set to aname that is not valid.

Message Variables:name Name of a valid software package.source host

Source host name.


Operator Response: Specify a valid source host name and trythe operation again.

DIS:SENG:0138 The software package ‘name’ contains aninvalid log host (‘log host’).

Explanation: The log host attribute has been set to a namethat is not valid.

Message Variables:name Name of a valid software package.log host Log host name.


Operator Response: Specify a valid log host name and trythe operation again.

DIS:SENG:0139 Unexpected failure when checking theconsistency of software package ‘name’.

Explanation: You attempted to run a change managementoperation on a software package that is not consistent.



Operator Response: Run the wchkdb -u command to verifyand repair the software package in the object database.

See: Tivoli Management Framework Reference Manual

DIS:SENG:0140 Software package ‘name’ was moved tolost-n-found because it failed to pass adatabase consistency check. It generatedthe following errors:

Explanation: The software package has some attributes thatare not consistent.



Operator Response: Resolve the inconsistency and move thefile from the lost-n-found collection.

DIS:SENG:0141 Software package ‘name’ is now invalidbecause software package ‘corequisite’ hasbeen removed and ‘corequisite’ is acorequisite of software package ‘name’.

Explanation: See message; used in conjunction with messageDIS:SENG:0140.

Message Variables:name Name of a valid software package.corequisite

Name of a valid software package.


Operator Response: Resolve the inconsistency and try theoperation again.


18 Version 4.1

DIS:SENG:0142 Software package ‘name’ was moved fromprofile manager ‘profile manager’ inpolicy region ‘policy region’ to thelost-n-found collection. Software package‘corequisite’ should be removed as acorequisite of software package ‘name’before reusing the software package‘name’ from the lost-n-found collection.

Explanation: See message; used in conjunction with messageDIS:SENG:0140.

Message Variables:name Name of a valid software package.profile manager

Name of the profile manager.policy region

Name of the policy region.corequisite

Name of the corequisite software package.

System Action: None


DIS:SENG:0143 Software package ‘name’ already residesin the lost-n-found collection. Softwarepackage ‘corequisite’ should be removedas a corequisite of software package‘name’ before reusing the softwarepackage ‘name’ from the lost-n-foundcollection.

Explanation: See message: used in conjunction with messageDIS:SENG:0140.

Message Variables:name Name of the software package.corequisite

Name of the corequisite software package.



DIS:SENG:0144 Software package ‘corequisite’ should beremoved as a corequisite of softwarepackage ‘name’ before reusing thesoftware package ‘name’ from thelost-n-found collection.


Message Variables:corequisite

Name of the corequisite software package.name Name of the software package.



DIS:SENG:0145 Software package ‘name’ in profilemanager ‘profile manager’ in policyregion ‘policy region’ contained acorequisite of software package‘corequisite’. Because the softwarepackage name ‘corequisite’ was changedto ‘new name’, the corequisite list for‘name’ was updated accordingly.


Message Variables:name Name of the software package.profile manager

Name of the profile manager.policy region

Name of the policy region.corequisite

Name of the corequisite software package.new name

New name of the corequisite software package.

System Action: None


DIS:SENG:0146 Software package ‘name’ is now invalidbecause the Tivoli managed node‘managed node’ has been removed. Themanaged node was used as:

Explanation: See message: used in conjunction with messagesDIS:SENG:0147 and DIS:SENG:0148.

Message Variables:name Name of the software package.managed node

Name of the managed node.


Operator Response: Resolve the inconsistency by specifyinganother managed node name that is either a log host or a sourcehost, then try the operation again.

DIS:SENG:0147 The log host for the software package.

Explanation: Used in conjunction with messageDIS:SENG:0146.





1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0148 The source host for the software package.

Explanation: Used in conjunction with messageDIS:SENG:0146.



DIS:SENG:0149 Software package ‘software packagename’ was moved from profile manager‘profile manager name’ in policy region‘policy region name’ to the lost-n-foundcollection. Any problems should becorrected before moving the softwarepackage out of lost-n-found and trying touse it again.



Name of the software package.profile manager name

Name of the profile manager.policy region name



Operator Response: Correct any problems before moving thesoftware package out of the lost-n-found collection, then try theoperation again.

DIS:SENG:0150 Software package ‘software packagename’ already resides in the lost-n-foundcollection. Any problems should becorrected before moving the softwarepackage out of lost-n-found and trying touse it again.





Operator Response: Correct any problems before moving thesoftware package out of the lost-n-found collection, then try theoperation again.

DIS:SENG:0151 Any problems should be corrected beforetrying to use software package ‘softwarepackage name’.





Operator Response: Check the associated displayedmessages, correct the problem, then try the operation again.

DIS:SENG:0152 The following errors occurred whilenotifying others about a software packageremoval:

Explanation: An error occurred while notifying the noticegroup of a software package removal. Used in conjunction withvarious error messages.


Operator Response: Check the associated displayed messagesand the log files.

DIS:SENG:0153 The following errors occurred whilenotifying others about a software packagename change:

Explanation: An error occurred while notifying the noticegroup of a software package name change. Used in conjunctionwith various error messages.


Operator Response: Check the associated messages and thelog files.

DIS:SENG:0154 Error: Invalid default value ofdistribution input for the drag-and-dropoperation.

Explanation: You set a default change management operationmode that was not valid.


Operator Response: Set a valid default change managementoperation mode and try the operation again.

DIS:SENG:0155 Distribution ID: ‘distribution ID’.

Explanation: Used in conjunction with other messagesreturned from an endpoint.

Message Variables:distribution ID

ID assigned to the distribution.




20 Version 4.1

DIS:SENG:0156 Could not open OS/2 Profile ‘path’. Itmay be corrupted or it does not have avalid format.


Message Variables:path Valid path name for the OS/2® profile file.


Operator Response: Check the integrity and format of theprofile, then try the operation again.

DIS:SENG:0157 The OS/2 Profile ‘path’ cannot be created.Check that the path is correct and can becreated.


Message Variables:path Valid path name for the OS/2 profile file.


Operator Response: Specify the correct path and try theoperation again.

DIS:SENG:0158 Cannot add section/key ‘section/key’ inOS/2 Profile ‘path’.

Explanation: You attempted to add an OS/2 profile section orkey to a read-only file.

Message Variables:path Valid path name for the OS/2 profile file.section Section name for the OS/2 profile file.key Key name of section for the OS/2 profile file.



DIS:SENG:0159 Cannot remove section/key ‘section/key’ inOS/2 Profile ‘path’.

Explanation: You attempted to remove an OS/2 section orkey from a read-only file.

Message Variables:path Valid path name for the OS/2 profile file.section Section name to be removed in OS/2 profile file.key Key name of the section to be removed in OS/2

profile file.



DIS:SENG:0160 The OS/2 Desktop object ‘title’ cannot becreated.

Explanation: You attempted to create an OS/2 desktop objectin a read-only file.

Message Variables:title Name of OS/2 desktop object.


Operator Response: Check that the file where you want tocreate the OS/2 desktop object is not read-only and try theoperation again.

DIS:SENG:0161 The OS/2 Desktop object ‘title’ cannot beremoved.

Explanation: You attempted to remove an OS/2 desktopobject from a read-only file.

Message Variables:title Name of OS/2 desktop object.


Operator Response: Check that the file containing the OS/2desktop object is not read-only and try the operation again.

DIS:SENG:0162 Error opening the catalog.

Explanation: The catalog containing the change managementstatus of software packages failed. The catalog could becorrupted.


Operator Response: Try the operation again. If the problempersists, contact Tivoli Customer Support.

DIS:SENG:0163 No entries.

Explanation: No entries are contained in the catalog.



DIS:SENG:0164 Name: package name.

Explanation: Name of the package in the catalog displays.

Message Variables:package name

Name of a valid software package in the catalog.





1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0165 Version: package version.

Explanation: Version of the package in the catalog displays.

Message Variables:package version

Version number of a valid software package in thecatalog.



DIS:SENG:0166 State: package status.

Explanation: Status of the package in the catalog displays.

Message Variables:package status

Status of a valid software package in the catalog.



DIS:SENG:0167 Usage: wdlssp has no parameters.

Explanation: Usage of the wdlssp command.




DIS:SENG:0168 Warning: Directory ‘path’ is not empty.Operation could not be completed.

Explanation: Some files in the path are not part of thesoftware package, so the path cannot be removed.

Message Variables:path Valid path name for a directory.



DIS:SENG:0169 Invalid signature for SPD file object.Expected ‘valid signature’ or ‘validsignature’ and found ‘invalid signature’.

Explanation: The SPD file you specified contains an invalidsignature.

Message Variables:valid signature

Expected valid signatures for SPDF object.invalid signature

Invalid signature for SPDF object found.


Operator Response: Specify a valid signature in the SPD fileand try the operation again.

DIS:SENG:0170 Warning: Unable to post TEC event class‘event name’.

Explanation: An error occurred while an event was beingposted to the TEC event class.

Message Variables:event name

TEC event name.



DIS:SENG:0171 Error: Checks/Ignore options cannot beused if Tivoli Inventory is not activated.

Explanation: You tried to run a command option that requiresTivoli Inventory to be active.


Operator Response: Start Tivoli Inventory, then try thecommand again.

DIS:SENG:0172 Succeeded on hosts:

Explanation: Used in conjunction with other messages in alog file.



DIS:SENG:0173 Failed on hosts:




DIS:SENG:0174 <none>




DIS:SENG:0175 The following warning messages occurredbefore the distribution was submitted:





22 Version 4.1

DIS:SENG:0175 The following warning messages occurredwhen posting distribution results:




DIS:SENG:0177 The execution of program ‘program path’failed.


Message Variables:program path

Valid path name of a program.


Operator Response: Check the log files and run the programagain.

DIS:SENG:0178 Follow links option not supported withhard links.

Explanation: The follow_links option cannot be used with thehard_links option.


Operator Response: Specify either hard links or follow links,then try the operation again.

DIS:SENG:0179 Target file for hard link not found andthe file is not part of the package.

Explanation: The file to which you are linking does not existand is not part of the software package.


Operator Response: Specify a valid target file for each hardlink, then try the operation again.

DIS:SENG:0180 Link not found.

Explanation: The system attempted to follow the link, but thelink used as a source link was not found.


Operator Response: Specify a valid source file name for thelink, then try the operation again.

DIS:SENG:0181 File System object present on disk.Cannot install.

Explanation: A file system object with the same name as theone being installed already exists on the disk.


Operator Response: Specify a different valid name for theobject to be installed.

DIS:SENG:0182 Unable to install the Windows NT Service‘service name’.

Explanation: You attempted to install a Windows NT®

Service to a read-only file.

Message Variables:service name

Windows NT service name to be installed.


Operator Response: Check that the file where the WindowsNT Service is to be stored is not read-only and try theoperation again.

DIS:SENG:0183 Unable to remove the Windows NTService ‘service name’.

Explanation: You attempted to remove a Windows NT servicefrom a read-only file.

Message Variables:service name

Windows NT service name to be removed.


Operator Response: Check that the file where the WindowsNT service is stored is not read-only and try the operationagain.

DIS:SENG:0184 The software package is invalid.

Explanation: The software package format is not valid.


Operator Response: Check the integrity of the softwarepackage or re-create it, then try the operation again.

DIS:SENG:0185 Wrong condition specified near line linenumber: condition.

Explanation: A syntax error occurred for a condition insidethe software package.


Line number in the SPD file.condition

Invalid SPD file condition.




1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

Operator Response: Specify a valid condition and try theoperation again.

DIS:SENG:0186 Destination path of software package ‘spname’ needed.


Message Variables:sp name Name of software package


Operator Response: Specify a valid destination path and trythe operation again.

DIS:SENG:0187 Usage: wsetspat {[-bmove_removing_host] [-c commit] [-hsrc_host] [-l lenient] [-mdefault_svr_mode] [-Mdefault_cmop_mode] [-o default_cmop] [-scheck_no_src_host] [-u undo] [-vweb_view_mode] [-w staging_area]}spobj_name

Explanation: Usage of wsetspat command.




DIS:SENG:0188 Usage: wgetspat {-b | -c | -h | -l | -m | -M |-o | -p | -s | -t | -u | -v | -w} spobj_name

Explanation: Usage of wgetspat command




DIS:SENG:0189 Error: ‘option’ is not a valid value for thespecified attribute.


Message Variables:option Value for an attribute.


Operator Response: Specify a valid value and try theoperation again.

DIS:SENG:0190 Usage: wsetspop {[-h log_host] [-jlog_mode] [-L log_path] [-m mail_id] [-Ppost_notice] [-u log_uid]} spobj_name

Explanation: Usage of the wsetspop command.




DIS:SENG:0191 Usage: wgetspop {-h | -j | -L | -m | -P | -u}spobj_name

Explanation: Usage of the wgetspop command




DIS:SENG:0192 Usage: wsetspgs {[-a before_prog_path][-b after_prog_path] [-i after_input_path][-j before_input_path] [-pbefore_prog_env] [-P after_prog_env] [-sbefore_skip_non_zero] [-u after_as_uid][-U before_as_uid]} spobj_name

Explanation: Usage of the wsetspgs command




DIS:SENG:0193 Usage: wgetspgs {-a | -b | -i | -j | -p | -P |-s | -u | -U} spobj_name

Explanation: Usage of the wgetspgs command




DIS:SENG:0194 Updating user profile information forsoftware package ‘name.version’. Changemanagement action is: ‘action’.



Name and version number of a valid softwarepackage.

action Valid change management action.




24 Version 4.1

DIS:SENG:0195 Syntax error near line line number: Thedata buffer format is invalid.

Explanation: In the SPD file, the data attribute of theWindows registry value has a format that is not valid.


Line number in a software package definition file.


Operator Response: Check the format or type of the dataattribute in the value stanza.


DIS:SENG:0196 Syntax error: Invalid mode value: mode.


Message Variables:mode Requested mode value.


Operator Response: Specify a valid mode value and try theoperation again.

DIS:SENG:0197 Execution of user program program namefailed.

Explanation: Program failed.

Message Variables:program name

Name of a valid program.


Operator Response: Check the program log, if any, and runthe program again.

DIS:SENG:0198 User program exit code: exit code.

Explanation: The exit code of the executed user programdisplays.

Message Variables:exit code

User program exit code number.


Operator Response: Check the program log, if any, and runthe program again, if necessary.

DIS:SENG:0199 Action action cannot be executed.

Explanation: You attempted to perform an action that is notvalid.

Message Variables:action Change management action.


Operator Response: Specify a valid action and try theoperation again.

DIS:SENG:0200 Action action must be undoable intransactional.

Explanation: You attempted to undo an action that had notbeen performed in the undoable in transactional mode.

Message Variables:action Change management action.



DIS:SENG:0201 Usage: wexpspo [-o] [-f [managed_node:]export_file] @[SoftwarePackage:]spobj_name

Explanation: Usage of the wexpspo command.




DIS:SENG:0202 Host name is not a valid source host.

Explanation: You specified a source host name that is notvalid.


Name of the source host.


Operator Response: Specify a valid source host and try theoperation again.

DIS:SENG:0203 Cannot create log file ‘path’ on log host‘host name’, operation cannot becompleted.

Explanation: You have unsuccessfully attempted to create alog file on the specified log host, so the operation will notcomplete.

Message Variables:path Path name of the log file.host name

Name of the log host.




1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

Operator Response: Check that the log file is not read-only,that the specified drive is valid and that it has sufficient spaceavailable to contain the log file, and that you have specified anabsolute path name for the log file. Try the operation again.

DIS:SENG:0204 Error getting disk space on drive ‘drivelabel’.

Explanation: An error has occurred acquiring required spaceon the indicated drive.

Message Variables:drive label

Label of a valid system drive.


Operator Response: Obtain the required amount of diskspace on the indicated drive and try the operation again.

DIS:SENG:0205 The installed file path could be corrupted.

Explanation: After the installation of a valid softwarepackage, some anomalies were detected in one of the installedfiles (for example, the CRC of the installed file is differentfrom the CRC of the source file stored in the softwarepackage).

Message Variables:path Path name of the installed file.


Operator Response: Check the integrity of the path and trythe operation again, or perform the operation with the forceoption.

DIS:SENG:0206 Error: failure importing softwarepackage.

Explanation: The attempt to import a software package to theobject database on the server was unsuccessful.


Operator Response: Check the software package and try theoperation again.

DIS:SENG:0207 The Windows Profile section ‘sectionname’ in file ‘path’ is not empty: it willnot be removed.

Explanation: You attempted to remove a file that containeddata in a Windows profile section.

Message Variables:section name

Name of a valid Windows profile section.path Path name of a valid Windows profile file.


Operator Response: Make sure the section is empty, then trythe operation again.

DIS:SENG:0208 Source host ‘host name’ not defined as agateway or stand-alone repeater.



Name of a source host.


Operator Response: Define the source host as a gateway orstand-alone repeater.

DIS:SENG:0209 Error: The execution mode is inconsistentwith a package attribute (attribute).


Message Variables:attribute

Valid software package attribute, for example,undoable or committable.


Operator Response: Resolve any inconsistencies between themode and the attributes, then try the operation again.

DIS:SENG:0210 Error: Operation supported only onWindows 9x and Windows NT.

Explanation: You attempted to perform an operation that isnot supported on your operating system.


Operator Response: Set a condition to exclude Windowsoperating systems, then try the operation again.

DIS:SENG:0211 InstallShield error - return code errornumber.

Explanation: An error occurred during the execution ofInstallShield.

Message Variables:error number

InstallShield return code.


Operator Response: Check the path of the executable andresponse file. Check that the installation can be run on thetarget machine (for example, correct platform and adequate diskspace). Try the operation again.


26 Version 4.1

DIS:SENG:0212 An MSsetup error occurred.

Explanation: An error occurred during the running ofMSsetup.


Operator Response: Check the path of the executable andPDF file. Check that the installation can be run on the targetmachine (for example, correct platform and adequate diskspace). Try the operation again.

DIS:SENG:0213 Tivoli Software Distribution historicaldatabase support is already disabled.

Explanation: You attempted to disable Tivoli SoftwareDistribution historical database support by using the wswsprimcommand, but it is already disabled.



DIS:SENG:0214 Tivoli Software Distribution changemanagement status support is alreadydisabled.

Explanation: You attempted to disable Tivoli SoftwareDistribution change management status support by using thewswsprim command, but this feature is already disabled.



DIS:SENG:0215 Historical database support: enabled.

Explanation: You successfully enabled historical databasesupport with the wswsprim command.

System Action: Historical database support is now active.


DIS:SENG:0216 Historical database support: disabled.

Explanation: You successfully disabled historical databasesupport with the wswsprim command.

System Action: Historical database support is no longeractive.


DIS:SENG:0217 Change management status support:enabled.

Explanation: You successfully enabled change managementstatus support with the wswsprim command.

System Action: Change management status support is nowactive.


DIS:SENG:0218 Change management status support:disabled.

Explanation: You successfully disabled change managementstatus support with the wswsprim command.

System Action: Change management status support is nolonger active.


DIS:SENG:0219 Usage: wswsprim {-c|-d|-s|-v}.

Explanation: Usage of the wswsprim command.




DIS:SENG:0220 Usage: ./swdist_queries.sh<PolicyRegionName>[QueryLibraryName]

Explanation: Usage of swdist_queries script.



DIS:SENG:0221 Creating query library ....




DIS:SENG:0222 Creating query SWDISTDATA_QUERY.




DIS:SENG:0223 Creating query CM_STATUS_QUERY.






1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0224 Warning: Variable ‘variable name’ nearline ‘line number’ cannot be resolved.


Message Variables:variable name

Name of the variable.line number

Line number where the variable appears.


Operator Response: Resolve the variable and try theoperation again.


DIS:SENG:0225 Error: The path ‘target path’ cannot becreated.

Explanation: You tried to create a file or directory, but didnot succeed, because, for example, the volume or drive doesnot exist, or a path with the same name already exists.

Message Variables:target path

Path name of the target file or directory to be created

System Action: Operation may or may not succeed,depending on the phase.

Operator Response: Check that the path is valid, that therequired disk space is available, and that you have the correctpermissions to access the path. Try the operation again.

DIS:SENG:0226 The date that you have entered is out ofrange. Make sure that you are specifyingthe year as a four-digit number.

Explanation: You specified a date format that is not valid.


Operator Response: Specify the year portion of the date as afour-digit number and try the command again.

DIS:SENG:0227 The time string that you have entered isnot valid. Please specify the date as“\mm/dd/yyyy” and the time as “hh:mm”.

Explanation: You specified a time format that is not valid.


Operator Response: Specify the date as mm/dd/yyyy and thetime as hh:mm and try the command again.

DIS:SENG:0228 The date/time that you have entered isinvalid.

Explanation: You specified a date and time format that is notvalid.


Operator Response: Specify the date as mm/dd/yyyy and thetime as hh:mm and try the command again.

DIS:SENG:0229 It is not possible to specify the token‘option’ more than once.


Message Variables:option Valid token for the performed command.


Operator Response: Specify the option only once and try theoperation again.

DIS:SENG:0230 The input token ‘option’ is invalid.


Message Variables:option Input token for the performed command.


Operator Response: Specify a valid value for the token andtry the operation again.

DIS:SENG:0231 The input value ‘value’ for token ‘option’is invalid.

Explanation: You specified a value for the specified tokenthat is not valid.

Message Variables:value Input value for the specified option.option Input option for the performed command.


Operator Response: Specify a valid value for the token andtry the operation again.

DIS:SENG:0232 Host name is not a valid log host.

Explanation: You specified a log host name that is not valid.


Name of a log host.


Operator Response: Specify a valid log host name and trythe operation again.


28 Version 4.1

DIS:SENG:0233 The file ‘name’ has an invalid format.

Explanation: You specified a file name in a format that is notvalid.

Message Variables:name Name of a file.


Operator Response: Specify the file name in the correctformat and try the operation again.

DIS_SENG:0234 Error: Error importing the file ‘name’. Itcould be corrupted.

Explanation: The file format is either invalid or corrupted.

Message Variables:name The name of a file to be imported.


Operator Response: Check the integrity of the file and trythe operation again.

DIS:SENG:0235 The following targets failed checks foroperations requested in job namedSp_sched_job: ‘targets’

Explanation: The indicated targets of the distribution failedchecks.

Message Variables:targets The targets of an operation for which checks failed.


Operator Response: Check the log files and try the operationagain on those targets that failed the checks.

DIS:SENG:0236 An error occurred while executingscheduled job named Sp_sched_job.

Explanation: The attempt to execute the scheduled job wasunsuccessful.



DIS:SENG:0237 Warning: The default variable ‘defaultvariable’ overrides a built-in variable. Itcould never be used.

Explanation: You attempted to override a built-in variable.

Message Variables:default variable

Name of a default variable.



DIS:SENG:0238 Warning: The software package‘name.version’ is empty. An end stanzakeyword may be misplaced.



Name and version of the software package.


Operator Response: Check the syntax of the package and trythe operation again.

DIS:SENG:0239 The specified file package ‘name’ was notfound.

Explanation: You specified a file package that does not exist.

Message Variables:name Name of the file package.


Operator Response: Specify a file package that exists and trythe operation again.

DIS:SENG:0240 Usage: wfptosp [-c profile_manager] [-nsoftware_package] [-d] file_package

Explanation: Usage of the wfptosp command.




DIS:SENG:0241 The file package ‘name’ could not bemigrated.

Explanation: The attempted migration failed.

Message Variables:name Name of the file package to be migrated.



DIS:SENG:0242 Source/repair operations cannot beperformed on built packages.

Explanation: You incorrectly attempted to perform a sourceor repair operation on a package that is already built.


Operator Response: Convert the software package block to asoftware package, make sure that all the resources (source files)are available, then try the operation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0243 Invalid log_mode value ‘value’

Explanation: You specified a value for log_mode that is notvalid.

Message Variables:value Value of the log mode.


Operator Response: Specify a valid log_mode value and trythe operation again.

DIS:SENG:0244 Operation successfully submitted.

Explanation: The requested operation was successfullysubmitted.



DIS:SENG:0245 CID program exit code: exit code

Explanation: When the CID program completed execution, itreturned the specified exit code.

Message Variables:exit code

Exit code of the CID program.



DIS:SENG:0246 Automatic reboot not supported on thisplatform. Please manually reboot themachine after the operation.

Explanation: You requested that an automatic reboot beperformed, but an automatic reboot is not supported on youroperating system.


Operator Response: Perform a manual reboot of the machineafter the operation is completed.

DIS:SENG:0247 Warning: The action ‘action name’ will beperformed during the next logon.

Explanation: You are performing a Windows shell action thatapplies to the logged-on user only. Such an action takes effectat the next logon.

Message Variables:action name

Name of an action to be performed.



DIS:SENG:0248 Warning: An empty object has beenfound near line ‘line number’.



Line number in a software package definition file.


Operator Response: Check the syntax of the SPD file.

DIS:SENG:0249 Usage: wldsp [-d@[SoftwarePackage:]spobj_name] [[-i | -f | -I][-lmdist2_token=value] [-T repeaters_file]@[SoftwarePackage:] spobj_name[repeater...]

Explanation: Usage of the wldsp command.




DIS:SENG:0250 Usage: wuldsp[-d@[SoftwarePackage:]spobj_name] [[-i | -f | -I][-lmdist2_token=value] [-T repeaters_file]@[Software Package:] spobj_name[repeater...]

Explanation: Usage of the wuldsp command.




DIS:SENG:0251 Usage: from_depot key is allowed only onthe winstsp command

Explanation: You attempted to use the from_depot optionwith a command other than winstsp.



DIS:SENG:0252 Move from file ‘source file’ to ‘target file’will not be performed because the targetfile is already there. Probable cause isthat more than one file in the softwarepackage has the same destination path.


Message Variables:source file

Name of file to be moved.


30 Version 4.1

target fileName of moved file on the target machine.


Operator Response: Check the source and target path names,then try the operation again.

DIS:SENG:0253 Error: Invalid path name ‘pathname’.Absolute path is required.

Explanation: You specified a relative rather than an absolutepath for a file.

Message Variables:pathname

Absolute path of a file.


Operator Response: Specify an absolute path for the file andtry the operation again.

DIS:SENG:0254 Error: The path ‘pathname’ is invalid.

Explanation: You specified a path name that is not valid.

Message Variables:pathname

Path of a file.


Operator Response: Specify a valid path name and try theoperation again.

DIS:SENG:0255 Creating software package




DIS:SENG:0256 Error creating the software package

Explanation: An error condition occurred during the creationof a software package.


Operator Response: Check the integrity of the package andtry the operation again.

DIS:SENG:0257 No changes detected to the system. Nopackage generated.

Explanation: When the first and second snapshots werecompared, no differences were found, so the output softwarepackage was not generated.



DIS:SENG:0258 Error executing snapshot name

Explanation: An error occurred during the execution of asnapshot.

Message Variables:name Name of the snapshot file.


Operator Response: Check the autopack.ini file to excludeany locked or inaccessible files, then try the operation again.

DIS:SENG:0259 Running FileSystem snapshot

Explanation: The system is running either the first or secondsnapshot of the specified drive.



DIS:SENG:0260 Running TextFiles snapshot




DIS:SENG:0261 Running OS/2SystemFiles snapshot




DIS:SENG:0262 Running WinProfiles snapshot




DIS:SENG:0263 Running OS/2Profiles snapshot






1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0264 Running OS/2Desktop snapshot




DIS:SENG:0265 Running WinRegistry snapshot




DIS:SENG:0266 Running WinProgMan snapshot




DIS:SENG:0267 Running WinNT Services snapshot




DIS:SENG:0268 Running FileSystem difference

Explanation: The system is comparing the first and secondsnapshots and recording the differences in the specified outputsoftware package.



DIS:SENG:0269 Running TextFiles difference




DIS:SENG:0270 Running OS/2SystemFiles difference




DIS:SENG:0271 Running WinProfiles difference




DIS:SENG:0272 Running OS/2Profiles difference




DIS:SENG:0273 Running OS/2Desktop difference




DIS:SENG:0274 Running WinRegistry difference




DIS:SENG:0275 Running WinProgMan difference





32 Version 4.1

DIS:SENG:0276 Running WinShell difference




DIS:SENG:0277 Running WinNT Services difference




DIS:SENG:0278 Snapshot completed. Elapsed time time

Explanation: The snapshot completed in the specified timeframe.

Message Variables:time Length of time that was required to complete the

snapshot.



DIS:SENG:0279 Difference completed. Elapsed time time

Explanation: The differencing completed in the specified timeframe.

Message Variables:time Length of time required to complete the differencing.



DIS:SENG:0280 Method ‘method name’ not found on host‘host name’. Make sure Tivoli SoftwareDistribution is properly installed on it.

Explanation: You tried to use a software package method thatcould not be found. Perhaps Tivoli Software Distribution is notproperly installed on the host.


Name of the method not found.host name

Name of the host.


Operator Response: Make sure that Tivoli SoftwareDistribution is properly installed.

DIS:SENG:0281 Error creating the software packageblock.

Explanation: An error occurred when the software packageblock was being built.


Operator Response: Make sure that the resources areaccessible and that sufficient disk space exists. Try theoperation again.

DIS:SENG:0282 Error compressing the file ‘file name’ inthe Software Package Block.

Explanation: During the processing of the file, an erroroccurred, which could be caused by a lack of disk space, anetwork interruption, or the unavailability of a drive.

Message Variables:file name

File to be read.


Operator Response: Check that sufficient disk space isavailable, the required drives are available and that the networkis running properly; then try the operation again.

DIS:SENG:0283 Timeout of number seconds expired.

Explanation: The time allowed for the completion of theoperation was exceeded.

Message Variables:number Length of the timeout (in seconds).


Operator Response: Increase the length of the timeout andtry the operation again.


DIS:SENG:0284 Syntax error: Operator expected.

Explanation: A syntax error was detected during the runningof the command.



DIS:SENG:0285 Syntax error: Expected operator andfound ‘bad operator’.

Explanation: During the evaluation of a condition, a logicaloperator was found that is not valid.

Message Variables:bad operator

Logical operator that is not valid.




1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

Operator Response: Correct the syntax, then try thecommand again.

DIS:SENG:0286 Syntax error: Unmatched closingparenthesis.




DIS:SENG:0287 Syntax error: Unmatched openingparenthesis.




DIS:SENG:0288 Syntax error: Expected operand andfound operator.




DIS:SENG:0289 Evaluation error: Incompatible operandtype.

Explanation: An evaluation error was detected during therunning of the command, indicating that one of the operandsspecified is incompatible with the command.



DIS:SENG:0290 Evaluation error: The result of thecondition is not a Boolean value.




DIS:SENG:0291 User program name executed successfully.

Explanation: The specified user program completedsuccessfully.

Message Variables:name Name of the user program.



DIS:SENG:0292 Change management status feature is notenabled.



Operator Response: Either Tivoli Inventory is not installed orthe change management status feature is not enabled. Eitherinstall Tivoli Inventory or use the wswsprim command toactivate the change management status feature.

DIS:SENG:0293 Usage: wmvspobj spobj_name...target_collection

Explanation: Usage of the wmvspobj command.




DIS:SENG:0294 The target_collection name must be thename of a valid Tivoli profile manager.

Explanation: You specified a target collection name that isnot valid.


Operator Response: Specify a valid Tivoli profile managername and try the operation again.

DIS:SENG:0295 Finished moving software package(s) totarget.

Explanation: The attempt to move the software package wassuccessful.

Message Variables:target Target destination of the software package.




34 Version 4.1

DIS:SENG:0296 Actions to be performed :

Explanation: Used in conjunction with other messages.



DIS:SENG:0297 No actions to be performed !

Explanation: Used in conjunction with other messages.



DIS:SENG:0298 A software package definition ‘SPD file’was created.

Explanation: The attempt to create a software packagedefinition file was successful.

Message Variables:SPD file

Name or the SPD file created.



DIS:SENG:0299 The profile manager and the source hostare required.

Explanation: When running the wfptosp command, youattempted to migrate a file package without specifying eitherthe profile manager or source host, which are required.


Operator Response: Make sure that both the profile managerand source host are specified, then run the command again.


DIS:SENG:0300 Invalid repeater name : ‘repeater name’.

Explanation: You supplied a repeater name that is not valid.

Message Variables:repeater name

Name of a repeater.


Operator Response: Check the repeater name and try theoperation again.

DIS:SENG:0301 The file ‘name’ is empty.

Explanation: You supplied a file name that identifies anempty file, which is not acceptable for this operation.



Operator Response: Check and change the file name and trythe operation again.

DIS:SENG:0302 Error: Host ‘host name’ is a managednode, not an endpoint.

Explanation: You supplied the name of a managed node,rather than an endpoint as required.


Name of a host.


Operator Response: Specify a valid host name and try theoperation again.

DIS:SENG:0303 Warning: UNIX attributes for file namehave been changed.

Explanation: You attempted to perform a file operation that isnot valid.



Operator Response: Ensure that the file attributes are correctand try the operation again.

DIS:SENG:0304 Creating querySWDIST_WEBUI_QUERY.




DIS:SENG:0305 Operation failed - check logfile.

Explanation: The attempted operation was unsuccessful.

Message Variables:Operation

Name of the attempted operation.


Operator Response: Check the log file, correct any problems,then try the operation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0306 Operation failed on some targets - checklogfile.

Explanation: The attempted operation failed on selectedtargets.

Message Variables:Operation

The name of the attempted operation.


Operator Response: Check the log file, correct any problems,then try the operation again.

DIS:SENG:0307 The following software package(s) wereadded as nested software packages to‘primary software package’: nestedpackages


Message Variables:primary software package

Name of the primary software package.nested packages

List of the names of the nested software packages.



DIS:SENG:0308 Warning: the temporary file name cannotbe removed.

Explanation: You specified the removal of a temporary filethat cannot be removed.

Message Variables:name Name of the temporary file.



DIS:SENG:0309 Cannot rename locked file ‘name’.

Explanation: You attempted to rename a file that is locked.

Message Variables:name Name of the locked file.



DIS:SENG:0310 Cannot remove locked file ‘name’.

Explanation: You attempted to remove a file that is locked.




DIS:SENG:0311 Locked file ‘name’ has been successfullyrenamed.





DIS:SENG:0312 File ‘name’ is locked. It will be removedduring the next reboot.

Explanation: You attempt to remove a locked file.




DIS:SENG:0313 Locked file ‘name’ has been successfullyremoved.





DIS:SENG:0314 Error: The execution mode is inconsistentwith the attribute ‘transactional’ of thepackage name.

Explanation: You specified an attribute that is not valid inconjunction with the execution mode. This message alsodisplays when a nested package containing the statementtransactional=y conflicts with values set in the primarypackage.

Message Variables:name Name of the package.


Operator Response: Check the attribute and try the operationagain.


36 Version 4.1

DIS:SENG:0315 Error: The execution mode is inconsistentwith the attribute ‘undoable’ of thepackage name.

Explanation: You specified an attribute that is not valid inconjunction with the execution mode. This message alsodisplays when a nested package containing the statementundoable=y conflicts with values set in the primary package.

Message Variables:name Name of the package.


Operator Response: Check the attribute and try the operationagain.

DIS:SENG:0316 The following error messages have beengenerated during software packagename.version status validation.

Explanation: When validating a package, error messages weregenerated; used in conjunction with other messages.



System Action: The operation may or may not havecompleted.

Operator Response: Check the messages, fix any problems,and try the operation again.

DIS:SENG:0317 Operation results on nested softwarepackage name.version:




System Action: None


DIS:SENG:0318 Operation results on primary softwarepackage name.version:



Name and version of the primary software package.

System Action: None


DIS:SENG:0319 Error: Ignore option is not specified andthe check operation detects that thesubmitted operation is not allowed for theprimary package or one or more nestedpackages on one or more targets (thestatus of the package or of one of itsnested packages related to one or moretargets doesn’t allow the submittedoperation).


System Action: Operation failed on one or more packages.

Operator Response: Check the primary and nested packagestatuses, then try the operation again.

DIS:SENG:0320 The following messages have beengenerated for each nested softwarepackage:

Explanation: See message; used in conjunction with othermessages.



DIS:SENG:0321 Tivoli Software Distribution. Startingpost-reboot operations. Please wait...




DIS:SENG:0322 * Processing package name.version.






DIS:SENG:0323 The source host for one or more nestedpackages is different from the source hostof the primary package.

Explanation: You tried to specify one or more nestedsoftware packages that have a different source host from theprimary package.


Operator Response: Ensure that all nested packages and theprimary package have the same source host, then try theoperation again.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0324 Error: Cannot create backup package.

Explanation: The attempt to create a backup package wasunsuccessful probably because of insufficient disk space.


Operator Response: Ensure that sufficient space exists tocreate the backup package, then try the operation again.

DIS:SENG:0325 Error: Cannot save software packageentry.



Operator Response: Check and correct the software packageand try the operation again.

DIS:SENG:0326 Attempt to use policy method ‘policymethod’ for software package ‘packagename’ in the policy region ‘policy region’failed with exit code ‘exit code’.


Message Variables:policy method

Name of the policy method.package name

Name of the software package.policy region

Name of the policy region of the software package.exit code

Number of the exit code generated.



DIS:SENG:0327 Load/unload operations cannot beperformed on packages that are not built.

Explanation: You attempted to perform a load or unloadoperation on a software package rather than a software packageblock.


Operator Response: Create a software package block and trythe operation again.

DIS:SENG:0328 Syntax error near line line number:Package package name already specifiedas a nested software package.

Explanation: You have already specified that this softwarepackage is nested. A software package can be nested only oncein any one primary package.


Line number in the SPD file where the error wasfound.

package nameName of the software package to be nested.


Operator Response: Specify the nested software packageonly once, then try the operation again.

DIS:SENG:0329 Error: Mixed targets(hardware-inventoried andnon-hardware-inventoried) are notallowed in the remove operation if theforce option is not set. Submit twodifferent requests or perform thehardware scan for all targets.



Operator Response: Submit two different requests or performthe hardware scan for all targets.

DIS:SENG:0330 Error: Remove operation for targetshaving a different package state in theTivoli Inventory database is not allowed ifthe force option is not set.



Operator Response: To remove the package on such a target,use the force option, and try the operation again.

DIS:SENG:0331 Performing a rollback due to a failureexecuting the requested operation onnested software package name.version

Explanation: The requested operation failed on the specifiednested software package.


Name and version of a nested software package.


Operator Response: Check the nested software package andtry the operation again.


38 Version 4.1

DIS:SENG:0332 Rollback performed successfully.




DIS:SENG:0333 A failure was detected during therollback.



Operator Response: Check the log file and try the operationagain.

DIS:SENG:0334 The following messages were generatedduring the rollback:

Explanation: See message; used in conjunction with othermessages.



DIS:SENG:0335 Usage: wgetsnsp [-l] spobj_name

Explanation: Usage of the wgetsnsp command.




DIS:SENG:0336 Usage: wsetsnsp [-p aspobj_name |-r] -nspobj_name...sppobj_name

Explanation: Usage of the wsetsnsp command.




DIS:SENG:0337 Error: package name is not a validsoftware package name (the name-versionseparator is missing).





Operator Response: Specify the software package nameusing the correct format and try the operation again.

DIS:SENG:0338 Error: package name was specified withthe -p option, but it is not present in thelist of nested software packages.





Operator Response: Specify a software package alreadypresent in the list of nested software packages. Alternatively, donot specify the -p option with the wsetsnsp command; in thisway the nominated package or packages will be inserted at thebeginning of the nested software packages list. Resubmit theoperation.

DIS:SENG:0339 Package package name was alreadyspecified as a nested software package.



Name of the nested software package.


Operator Response: Specify the package name only once andtry the operation again.

DIS:SENG:0340 An error occurred attempting to usepolicy validation method ‘method name’on software package ‘package name’ inpolicy region ‘policy region’.



Name of the method.package name

Name of the package being validated.policy region




DIS:SENG:0341 Program ‘program name’ is still running:session timeout expired.



Name of a program.

System Action: The processing continues. The systemprocesses the program according to the values specified in theMDist2 parameters.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)


DIS:SENG:0342 The directory tree ‘path name’ cannot beloaded.


Message Variables:path name

Path name of the directory tree.

System Action: The operation failed. The processing stops.

Operator Response: The specified directory is not available.For example, it is loaded or is in use by another program.Unlock the directory tree and retry the operation.

DIS:SENG:0343 Operation unsuccessful. Failed a nestedpackage.

Explanation: The operation failed on one or more nestedpackages of the primary package.

System Action: The operating failed. The command is notperformed.

Operator Response: Analyze the logfile to understand theproblem and resubmit the operation.

DIS:SENG:0344 Visual Editor startup script not installed.

Explanation: The Tivoli Software Distribution SoftwarePackage Editor component is not installed correctly.

System Action: The processing stops.

Operator Response: Reinstall the Tivoli Software DistributionSoftware Package Editor component.






DIS:SENG:0350 For a built or delta package, an operationcan’t be ‘disposable’ and ‘from_depot’ atthe same time.



Operator Response: Correct the command and resubmit theoperation. You cannot specify disposable and from_depot in thesame command.

DIS:SENG:0351 Distribution options ‘from_depot’ and‘disposable’ are not applicable for a notbuilt package.



Operator Response: Build the software package or do not usefrom_depot or disposable for a package that has not been built.

DIS:SENG:0352 The execution of the before buildprogram failed with return code ‘returncode’.


Message Variables:return code

The return code of the program.


Operator Response: Analyze the return code in the log file,correct the problem and resubmit the operation.

DIS:SENG:0353 Failure : distribution with empty data !

Explanation: A connection without any send data has beenopened by mdist2 on an endpoint. For example, a distributionwith from_depot=y is issued, but the depot is empty.

System Action: The operation fails, as does the distributionengine.

Operator Response: Restart Tivoli Software Distribution,examine the logs to determine the cause of the error, correct theerror and rerun the command. For example, if the problem is asthat described in the Explanation, you would need to load thedepot with the appropriate software package using the wldspcommand, before reissuing the distribution command.

DIS:SENG:0354 Usage: disposable key is not usable forthis operation.


System Action: The operation failed. The command is notperformed.

Operator Response: Do not specify the disposabledistribution option using the wldsp or the wuldsp commands.


40 Version 4.1

DIS:SENG:0355 An input value is invalid. Only numericalvalues are allowed.

Explanation: A non-numeric value has been entered for thetime-out settings.


Operator Response: Enter a valid value for the timeoutsettings.

DIS:SENG:0356 Software package with size greater than 2G bytes is not supported.



Operator Response: Analyze the size of the softwarepackage, divide it into two or more separate nested packagesthat are each smaller than 2 gigabytes, and resubmit theoperation for the primary package.

DIS:SENG:0357 Warning: source files/directories notfound on host <host name>.



Name of the source host.

System Action: The operation failed. The command is notexecuted.

Operator Response: Verify that the files or directories of thefile package are located on the specified source host.

DIS:SENG:0358 Attempting to overwrite locked file filename.



Name of the locked file.


Operator Response: Analyze the error message, correct theproblem and resubmit the operation.

DIS:SENG:0359 Software package operation failed. Errormessage: message


Message Variables:message Text of the message received.


Operator Response: Analyze the error message, correct theproblem and resubmit the operation.

DIS:SENG:0360 The Windows MSI product ‘MSI softwarepackage’ cannot be installed.


Message Variables:MSI software package

The name of the MSI software package

System Action: The operation failed. If you specified thestop_on_failure attribute the processing stops, otherwise thesystem processes the other actions of the software package.

Operator Response: Analyze the log file, correct theproblem, and resubmit the operation.

DIS:SENG:0361 The Windows MSI package file ‘MSIsoftware package’ cannot be read. TheMSI error is return code.



The name of the MSI software package.return code

The return code of the msiexec.exe program.


Operator Response: Analyze the MSI return code, using theMSI documentation to help you identify the error. Correct theMSI package and resubmit the software package. The MSIpackage could be in use, locked, or corrupted.

DIS:SENG:0362 Installation of MSI package file ‘MSIsoftware package’ failed. The MSI error isreturn code.



The name of the MSI software package.return code


System Action: The operation fails and the incompleteinstallation process is rolled back. If you specified thestop_on_failure attribute the processing stops, otherwise thesystem processes the other actions of the software package.

Operator Response: Analyze the MSI return code. Correctthe MSI package and resubmit the software package.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0363 Removal of MSI product ‘MSI productname’ failed. The MSI error is returncode.


Message Variables:MSI product name

The name of the MSI product.return code



Operator Response: Analyze the MSI return code. Correctthe MSI package and resubmit the software package.


DIS:SENG:0365 Syntax error at line number. Theproperty list ‘property list’ is not correct.

Explanation: An MSI error occurred importing the softwarepackage.

Message Variables:number The number of the line where the problem occurred.property list

The property list that contains the line in error.


Operator Response: Analyze the property list of the MSIstanza in the software package. Correct the problem andresubmit the software package.

DIS:SENG:0366 Cannot configure MSI product ‘MSIproduct name’ version ‘version’.

Explanation: The system cannot configure the specified MSIproduct installing an MSI patch.

Message Variables:MSI product name

The name of the MSI product.version The version of the package on which the operation is

performed.


Operator Response: The name or the version of the MSIproduct, or both, are not correct. Specify a correct MSI productname and version.

DIS:SENG:0367 The Windows MSI patch ‘name’ cannotbe installed.


Message Variables:name The name of the MSI patch.


Operator Response: Verify that the name of the MSI packageis correct and resubmit the MSI package that contains thepatch.

DIS:SENG:0368 Installation of MSI patch file ‘name’failed. The MSI error is error.


Message Variables:name The name of the MSI patch.error The error message returned by the system.


Operator Response: Analyze the MSI error message, correctthe problem and resubmit the MSI package that contains thepatch.


DIS:SENG:0370 Package ‘name’ is not a specified nestedsoftware package.

Explanation: You are trying to remove a nested softwarepackage using a name that does not match an existing nestedsoftware package.

Message Variables:name Name of the software package.


Operator Response: Specify the correct name of the softwarepackage.

DIS:SENG:0371 Cannot remove the same primarysoftware package ‘name’.

Explanation: You cannot remove a primary software package.

Message Variables:name Name of the software package.




42 Version 4.1

DIS:SENG:0372 Creating query SD_LOADED_COMPONENT_QUERY.


System Action: The processing continues.


DIS:SENG:0373 Operation successful. Rebooting....




DIS:SENG:0374 Usage: wspmvdata {-s origin_list | -d} -tdestination_list [-P sp|tp: path] [-rspre|spost|tpre|tpost:script] [-S swpackage[:state]] [-c] [-Dvariable=value][-I][-lmdist2_token=value...][-pprofile_manager] [-A] file.

Explanation: Usage of the wspmvdata command.




DIS:SENG:0376 Both <src_list> and <trg_list> parameterscontain lists of endpoints. For the sendand retrieve operations, only one of theparameters can contain endpoints. Theother parameter must be a source host.


System Action: Operation failed. The command is notperformed.

Operator Response: Redefine either the <src list> or the<trg_list>, specifying a source host.

DIS:SENG:0377 The value (system name) specified eitherin the <src_list> or <trg_list>, is not thename of text file, an endpoint, a profilemanager, or a source host.


Message Variables:system name

Name of a system, specified as a source or target.


Operator Response: Check the system name that is identifiedas an error and correct it.

DIS:SENG:0378 Both the <src_list> and <trg_list>parameter refer to a source host. For thesend and retrieve operations, one of theparameters must refer to endpoints orprofile managers.



Operator Response: Redefine either the <src_list> or the<trg_list>, specifying endpoints or profile managers.

DIS:SENG:0379 Neither the <src_list> nor <trg_list>parameter refers to a source host. For thesend and retrieve operations, one of theparameters must specify a source host.



Operator Response: Redefine either the <src_list> or the<trg_list>, specifying a source host.

DIS:SENG:0380 For a delete option (-d), the <trg_list>parameter cannot refer to a source host.



Operator Response: Redefine the <trg_list> parameter,specifying a system that is not a source host.

DIS:SENG:0381 The Software Package Object name doesnot exist. Use the (-p) switch to specifythe profile manager where it is to becreated.


Message Variables:name Name of the software package object.


Operator Response: Specify a correct software packagename, or use the (-p) switch to specify the profile managerwhere it is to be created.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0382 User program user program nameexecuted successfully on source host(source host name). User program exitcode: code


Message Variables:user program name

The name of the user program.source host name

The name of the source host.code Exit code of the user program.



DIS:SENG:0383 Operation (send) completed: destinationfile: (name).


Message Variables:name The name of the destination file.



DIS:SENG:0384 Operation (retrieve) completed: originend point file: (name).


Message Variables:name The name of the origin endpoint.



DIS:SENG:0385 Operation (delete) completed: destinationend point file: (name).


Message Variables:name The name of the destination endpoint file.



DIS:SENG:0386 The state specified for the SoftwarePackage (name) is not supported. Thesupported states are: I and R. The defaultstate is (I).


Message Variables:name Name of the software package object.


Operator Response: Resubmit the command specifying oneof the supported states.


DIS:SENG:0388 No destination system in the list satisfiesthe specified software dependencies.



Operator Response: Specify a list of endpoints that meets thesoftware dependencies, or change the software dependencies.Resubmit the command.

DIS:SENG:0389 Destination system failed: name.

Explanation: The data moving operation failed on thespecified destination system.

Message Variables:name The name of the destination system.


Operator Response: Analyze the log file, correct the problemand resubmit the operation.

DIS:SENG:0390 Usage: wsdvers {-n | -v | -t}{spobj_name...}

Explanation: Usage of the wsdvers command.



DIS:SENG:0391 Software Packages exist with laterversions than ‘name.version’:

Explanation: You have used the wsdvers command with the-n option to obtain information about the presence of laterversions of the package than that indicated. The messageindicates that later versions exist.


The name and the version of the software package.

System Action: Processing continues for any other softwarepackages identified in the command string.



44 Version 4.1

DIS:SENG:0392 No Software Package exists with a laterversion than ‘name.version’:

Explanation: You have used the wsdvers command with the-n option to obtain information about the presence of laterversions of the package than that indicated. The messageindicates that either no later versions exist, or if they do theyare not versionable (versioning type = NONE), and thus are notconsidered to be later versions.





DIS:SENG:0393 Package ‘name.version’ is NOT in anacceptable state ‘status’.



The name and the version of the software package.status The status of the package.

System Action: Operation failed. The processing stops.

Operator Response: Change the status of the indicatedsoftware package to be compatible with the operation.

DIS:SENG:0394 Package ‘name.version1’ has becomehidden because of the operation that wasperformed on Package ‘name.version2’.


Message Variables:name.version1

The name and the version of the software packagethat is in the hidden state.

name.version2The name and the version of the software package onwhich the operation is performed.



DIS:SENG:0395 Package ‘name.version1’ was replaced bypackage ‘name.version2’.



The name and the version of the software packagethat has been replaced

name.version2The name and the version of the software packagethat replaced the existing package.



DIS:SENG:0396 For a non-versionable package, thepackage type must be ‘type’.

Explanation: You have submitted an operation on anon-versionable software package; the software package type isnot correct, and should be as indicated.

Message Variables:type The type of the software package.


Operator Response: Specify the correct package type.

DIS:SENG:0397 Package ‘name.version’ is in a hiddenstate.

Explanation: You cannot perform the operation on a packagethat is in the hidden state. The software package is in thehidden state because a later version of it has been installed inundoable mode.





DIS:SENG:0398 The value ‘value’ is not a valid packagetype.


Message Variables:value The value of the package type attribute.


Operator Response: Specify a correct value for the packagetype.

DIS:SENG:0399 The value ‘value’ is not a valid versioningtype.


Message Variables:value The value of the versioning type attribute.


Operator Response: Specify a correct value for theversioning type.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0400 Package ‘name.version’ is not versionable.

Explanation: You have used the wsdvers command with the-n option to obtain information about the presence of laterversions of the package than that indicated. The messageindicates that the software package is not versionable(versioning type = NONE), and thus, even if versions of thepackage with later version numbers are available, they are notconsidered to be later versions.





DIS:SENG:0401 Cannot install a patch without a baseapplication.



Operator Response: Install the base application.

DIS:SENG:0402 Cannot install a patch on an undoableapplication in non-undoable mode.



Operator Response: Install the patch in undoable mode.

DIS:SENG:0403 The package ‘name.version’ is a laterversion in state state.

Explanation: You cannon install a previous version of asoftware package on a target system where a later version isalready installed.


The name and the version of the software packagealready present on the target system.

state The state of the software package already present onthe target system.


Operator Response: Specify a later version of the softwarepackage.

DIS:SENG:0404 Package ‘name.version1’ has becomeactive because of the operation that wasperformed on Package ‘name.version2’.



The name and the version of the software packagethat is in the active status.




DIS:SENG:0405 Package ‘name.version1’ has beenremoved because of the operation thatwas performed on Package‘name.version2’.



The name and the version of the software packagethat is removed.




DIS:SENG:0406 An operation was performed on PATCHpackage ‘name.version1’ which hasaffected the base package ‘name.version2’.



The name and the version of the software packagethat contains the patch.

name.version2The name and the version of the base softwarepackage.




46 Version 4.1

DIS:SENG:0407 Failed cm_status check.

Explanation: This message is displayed when you havecarried out a change management operation using one of thefollowing options:¶ Checks (command attribute -i)¶ Ignore (command attribute -I)¶ Force (command attribute -f)

and the status of the software package at the target is notcompatible with the change management action submitted.

System Action: In the case of the Checks and Ignore options,there is no further processing for the target; in the case of theForce option, the change management operation is carried out,overriding the status check.

Operator Response: Action is only required in the event thatthe Checks or the Ignore option have been used, in which caseyou must do one of the following:¶ Check the statuses of the software package on the server

and the target systems, determine what has caused thestatus check failure, correct the problem and resubmit theoperation

¶ Use the Force option to override the status check.

DIS:SENG:0408 Failed versioning check.


and the software package at the target has not satisfied theversioning requirements of the software package for which youwant to submit the operation (for example, the version of thesoftware package to be installed is lower than that on thetarget).

System Action: In the case of the Checks and Ignore options,there is no further processing for the target; in the case of theForce option, the change management operation fails, as theforce option is not available if a software package fails aversioning check.

Operator Response: Check the versions of the softwarepackage on the server and the target systems (and whether theypermit versioning), determine what has caused the versioningcheck failure, correct the problem and resubmit the operation

DIS:SENG:0409 The previous version of the product is notin a compliant Install State.



Operator Response: Verify that the MSI product on whichyou want to install the patch has been installed correctly, andresubmit the operation.

DIS:SENG:0410 Cannot retrieve the target directory fromthe installed product, product name willbe installed into its default INSTALLDIR.

Explanation: The system cannot find the directory where thebase product is installed. The patch is installed in the defaultdirectory.

Message Variables:product name

The name of the product to install.


Operator Response: If the patch installation in the defaultdirectory is not acceptable, remove the patch from the defaultdirectory, specify the product code of the installed product inthe software package that contains the patch, and resubmit theoperation.

DIS:SENG:0411 Usage: wdsetstsp [-f] [-v versioning_type][-t package_type] spname.spver...

Explanation: Usage of the wdsetstsp command.



DIS:SENG:0412 The Software Package name.versionalready exists.





Operator Response: Correct the name of the softwarepackage.

DIS:SENG:0413 Usage: wsyncsp [-f] [-lmdist2_token=value]... {-T targets_file...targets}...

Explanation: Usage of the wsyncsp command.





1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0414 Trying perform an operation on a‘software package type1’ with a ‘softwarepackage type2’!

Explanation: You want to perform an operation on a softwarepackage that has a different package type than that of thesoftware package already present on the target system.

Message Variables:software package type1

The type of the software package already present onthe target system.

software package type2The type of the software package with which youwant to perform the operation.


Operator Response: Redefine the package type to match thepackage type of the software package already present on thetarget system.

DIS:SENG:0415 Failed load/unload check.

Explanation: This message is displayed when you havecarried out a load or unload operation using one of thefollowing options:¶ Checks (command attribute -i)¶ Ignore (command attribute -I)¶ Force (command attribute -f)

and the conditions for completing the operation on the targetare not met (see Tivoli Management Framework: User’s Guidefor details of the load and unload operations).

System Action: In the case of the Checks and Ignore options,there is no further processing for the target; in the case of theForce option, theload or unload operation is carried out,overriding the load/unload check.

Operator Response: Action is only required in the event thatthe Checks or the Ignore option have been used, in which caseyou must do one of the following:¶ Check why the conditions for the load or unload operation

have not been met, correct the problem and resubmit theoperation

¶ Use the Force option to override the load/unload check.

DIS:SENG:0416 No synchronization to be performed.

Explanation: The database is already synchronized.

System Action: The processing continues with the otherrequested operations.


DIS:SENG:0417 All entries in the catalog were removed.




DIS:SENG:0418 Package ‘name’ current status is: ‘status’.


Message Variables:name Name of the software packagestatus The current status of the software package.



DIS:SENG:0419 Package ‘name’ was installed with status:‘status’.


Message Variables:name Name of the software package.status The current status of the software package.



DIS:SENG:0420 The package ‘name’ was removed.


Message Variables:name Name of the software package that was removed.

System Action: Operation completed. The processingcontinues.


DIS:SENG:0421 The system must be rebooted in order toperform this command.


System Action: Operation stopped, waiting for the system tobe rebooted.

Operator Response: Reboot the system.


48 Version 4.1

DIS:SENG:0422 Invalid number of elements in thesequence.

Explanation: This message is displayed if you are trying tomanage a software package prepared with Tivoli SoftwareDistribution, Version 4.0 using the Version 4.1 command lineinterface.


Operator Response: Several responses are valid, dependingon your environment and what you are trying to do:¶ Use the version 4.0 command line interface to manage the

version 4.0 software package¶ In a scenario with a version 4.0 Tivoli server interconnected

with a version 4.1 Tivoli server, use the version 4.1 GUI tomanage the version 4.0 software package

¶ Import a version 4.0 software package block from anendpoint connected via a version 4.0 gateway, using aversion 4.1 Tivoli server and source host; it can then bedistributed by the version 4.1 server to any endpointattached via either a version 4.0 or a version 4.1 gateway.

DIS:SENG:0423 Failed to run HPCP delta algorithm.Error number: error number.

Explanation: The delta algorithm had been prevented formrunning. Possible causes include insufficient workstationmemory or problems with accessing the delta file.

Message Variables:error number



Operator Response: Verify the system error number toettempt to establish the cause. Check that there is sufficientmemory on your workstation to run the algorithm, and that thedelta file is not in use or locked.

DIS:SENG:0424 Base and version packages have differentnested structure.

Explanation: The base and the version packages must havethe same nested structure.


Operator Response: Redefine the structure of the nestedpackages in the version software package to match the basepackage.

DIS:SENG:0425 Usage: wdubldsp {-s spd_path | -fspd_path} [-o] spb_path target_dir

Explanation: Usage of the wdubldsp command.



DIS:SENG:0426 Dependency check ‘dependency string’ forpackage ‘name’ failed.

Explanation: The operation that you carried out is not validfor the specified dependency check.

Message Variables:dependency string

The dependency string.name The name of the software package.

System Action: Operation failed. The process stops.

Operator Response: Verify that the dependency check stringcan be applied on the software package you specified or disablethe dependency check (command attribute -R.

DIS:SENG:0427 Dependency check ‘dependency string’ forpackage ‘name failed. error message

Explanation: The dependency check string you specified isnot correct.

Message Variables:dependency string

The dependency attribute.name The name of the software package.error message

The message that explains the error.


Operator Response: Correct the syntax of the dependencystring and resubmit the operation.

DIS:SENG:0428 Failed dependency check.


and the dependency conditions for completing the operation onthe target are not met (see Tivoli Software Distribution: User’sGuide for details of the supported dependency conditions).

System Action: In the case of the Checks and Ignore options,there is no further processing for the target; in the case of theForce option, the change management operation is carried out,overriding the dependency check.

Operator Response: Action is only required in the event thatthe Checks or the Ignore option have been used, in which caseyou must do one of the following:¶ Check why the dependency conditions have not been met,

correct the problem and resubmit the operation¶ Use the Force option to override the dependency check.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0429 Execution of user program program namefailed on source host (source host name).User program exit code: exit code

Explanation: The program failed to run on the specifiedsource host. An exit code was generated.


The name of the user program.source host name

The name of the source host.exit code

The user program exit code number.


Operator Response: Analyze the exit code, correct theprogram, and run the program again.

DIS:SENG:0430 File file name is locked. The HPCP deltaalgorithm cannot be applied.

Explanation: The HPCP delta algorithm cannot be applied onthe specified file because it is locked.


The name of the file.


Operator Response: Unlock the file and resubmit theoperation.

DIS:SENG:0431 This operation will remove all previousversions of package name. Do you want tocontinue [y/n]?


Message Variables:name The name of the software package.

System Action: The processing waits.

Operator Response: Type y if you want to continue with theoperation, otherwise type n; then press Enter.

DIS:SENG:0432 Targets cannot be indicated on previewand preview source operations.

Explanation: This message is displayed if you are runningany change management operation with the options preview all(command attribute -p or -p -m a) or preview source(command attribute -p -m s), and have also specified one ormore targets (subscribers). The preview all and preview sourceoptions only provide information about the software packageoperations by looking at the software package on the server; thepreview repair option (command attribute -p -m r) gives apreview of operations on specified targets.


Operator Response: Do not specify the target names orchange the preview type to preview repair and resubmit theoperation.

DIS:SENG:0433 Tivoli Inventory is unavailable. Use theIgnore option to submit this operation.

Explanation: Tivoli Inventory is not installed. It is notpossible to verify the change management status of the packageon which you are performing the operation.

System Action: Operation failed. The processing continuesstops.

Operator Response: To bypass the change management statuscheck specify the Ignore option and resubmit the operation.

DIS:SENG:0434 File name does not exist or is corrupted.The HPCP delta algorithm cannot beapplied.

Explanation: The HPCP delta algorithm cannot be applied onthe specified file because the file is corrupted or does not exist.

Message Variables:name The name of the file.


Operator Response: Check the validity of the file andresubmit the operation.

DIS:SENG:0435 The base package for delta compressionmust be different from the installationpackage.

Explanation: You specified the same name for the deltapackage and the base package.


Operator Response: Verify that the names that you specifiedfor the delta package and the base package are correct andresubmit the operation.

DIS:SENG:0436 If from_depot is set to y, you cannot seteither from_fileserver or from_cd to y.



Operator Response: Specify the correct values for theindicated parameters and resubmit the operation.


50 Version 4.1

DIS:SENG:0437 The create_depot_image=y option is onlyvalid with the load operation.

Explanation: This message is incorrect. It should read:

The depot_image_dir option is only valid with the loadoperation.

You have used a command (not wldsp) that allows you tospecifiy distribution options as mdist2 tokens. However, thetoken you have used (depot_image_dir) can only be used withthe load operation.


Operator Response: Retry the load operation, not setting thedepot_image_dir option.

DIS:SENG:0438 The sequence of escalation dates andmessages is invalid.

Explanation: You specified an incorrect sequence ofescalation dates and messages. Each escalation date must havean associated message and there must be no gaps in thesequence.


Operator Response: Specify a correct sequence of escalationdates and messages.

DIS:SENG:0439 Escalation dates and messages cannot beset for optional distributions.

Explanation: You specified a sequence of escalation dates andmessages for an optional distribution. which is not supported.


Operator Response: Change the distribution mode or deletethe sequence of escalation dates and messages and resubmit thedistribution.

DIS:SENG:0440 None of the following tokens can bespecified for hidden distributions:distribution_note, mandatory_date,enable_disconnected, from_cd andfrom_fileserver.



Operator Response: Change the distribution mode or do notset the above parameters.

DIS:SENG:0441 In the nested package sequence,‘name.version1’ follows its later versionname.version2.

Explanation: You specified an incorrect sequence of nestedpackages. You are trying to install a previous version on a laterversion.


The name and earlier version of a software packagethat has been found later in the nested packagesequence than name.version2.

name.version2The name and later version of a software package thathas been found earlier in the nested package sequencethan name.version1.


Operator Response: Correct the sequence of the packagesthat you want to install and resubmit the operation.

DIS:SENG:0442 Execution of user program ‘name’completed with result: ‘return code’.


Message Variables:name The name of the program.return code

The return code of the program.



DIS:SENG:0443 The status of software package‘name.version’ is ‘status’.

Explanation: The check on the operation failed because thestatus of the software package is not compatible with thecurrent status of the software package. For example, you wantto install a software package that has already been installed andwhose current status is IC---.


The name and version of the software package.status The current status of the software package.


Operator Response: Correct the name of the softwarepackage if it is incorrect, or force the operation using the -foption.



1.G

eneral

Messag

es(D

IS:S

EN

G:n

nn

n)

DIS:SENG:0444 These targets have not yet been scannedusing Tivoli Inventory.

Explanation: You have not yet used Inventory to scan thespecified targets, so the system does not have any informationon the software packages installed on the targets.


Operator Response: Use Inventory to scan the targets andsubmit the wsyncsp -f command to synchronize the statusinformation on the server for software packages on specifiedendpoints with the actual situation on the endpoints.

DIS:SENG:0445 The list of targets must not include anyspaces and must not finish with a comma.



Operator Response: Enter the correct syntax.

DIS:SENG:0446 Dependency check ‘string’ for package‘software package name’ on target ‘targetname’ skipped. unresolved variables

Explanation: A dependency check has been skipped becausethe indicated variable, or list of variables, could not beresolved.

Message Variables:string The dependency check string.software package name

The name of the software package.target name

The name of the target.unresolved variables

A list of the variables that could not be resolved.Each item in the list is in the form of a booleanstatement with a true or false argument. For example:

$(installed_software) == “file^1.0” [false]


Operator Response: From the information supplied it shouldbe possible to determine why the variable could not be resolvedand correct the error. You can then resubmit the operation.

DIS:SENG:0447 Unable to change SYSVAL ‘variable’ tovalue ‘value’.


Message Variables:variable The name of the variable.value The value that the variable could not be set to.


Operator Response: Check why the variable cannot be set tothe indicated value, correct the error and resubmit thecommand.

DIS:SENG:0448 The specified message file ‘name’ exceedsthe allowed size of ‘value’ bytes.

Explanation: The indicated message file is an html file thatcontains either a distribution note or an escalation message formobile users. It exceeds the maximum permitted size of 65535bytes.

Message Variables:name The name of the message file.value The maximum size of the message file.

System Action: The command is not performed.

Operator Response: Reduce the size of the message file tono more than the permitted size of 65535 bytes, and resubmitthe operation.

DIS:SENG:0449 The force_mandatory=y option can onlybe specified for mandatory distributions.



Operator Response: Specify the correct option or change thedistribution mode and resubmit the operation.

DIS:SENG:0450 Timeout of number seconds has expired.Check that your ncf contains wsetrccommand.


Message Variables:number Length of the timeout in seconds.


Operator Response: As stated in the message, check that awsetrc command has been placed in the ncf, adding it is not.Resubmit the operation.


52 Version 4.1

Activity Planner Messages(APM:nnnnnnX)

This chapter lists all the messages issued by the Activity Planner feature in numerical order.

Message FormatActivity Planner messages have the following format:APM:nnnnnnX

where the parts of the message are as follows:

APM: The Activity Planner message identifier

nnnnnnA unique numeric identifier

X The severity code indicator:

I Informational: Informational messages provide users with information orfeedback about normal events that have occurred or are occurring, or requestinformation from users in cases where the outcome will not be negative,regardless of the response.

Examples:¶ ″The status request is processing.″¶ ″The files were successfully transferred.″¶ ″Do you want to save your output in file a or in file b?″

W Warning: Warning messages indicate that potentially undesirable conditionshave occurred or could occur, but the program can continue. Warningmessages often ask users to make decisions before processing continues.

Examples:¶ ″A requested resource is missing. Processing will continue.″¶ ″A file already exists with the same name. Do you want to overwrite

this file?″

E Error: Error messages indicate problems that require intervention orcorrection before the program can continue.

Examples:¶ ″The specified file could not be found.″¶ ″You are out of space on the x drive. The file cannot be saved to this

drive.″

2


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

F Fatal: Fatal messages describe circumstances in which the program thatgenerated the message has ceased running.

Examples:¶ ″The Activity Planner Engine cannot start because a fatal error occurred

while the list of active plans was being determined″¶ ″An unrecoverable error occurred while connecting to the RIM object.

Activity Planner Engine cannot start″

Message DetailsThe Activity Planner messages are as follows:

APM-00001F The Activity Planner Engine cannot startbecause a fatal error occurred while thelist of active plans was being determined


System Action: The Activity Planner engine does not start.

Operator Response: Verify why the connection to thedatabase was not established, correct the error and resubmit theoperation.

APM-00002E An error occurred while the internalstructure for managing the dependenciesfor the plan name was being built. Theplan is not added to the list of activeplans


Message Variables:name The name of the plan


Operator Response: Check and correct the syntax of the planand resubmit it. If the problem persists delete the plan from thedatabase manually and recreate it.

APM-00003F An error occurred while the Executercomponent was being started (Exceptionexception message). Activity PlannerEngine cannot start


Message Variables:exception message

The exception message generated by the system.


Operator Response: Analyze the exception message in thelog file to determine the problem, correct it and resubmit theoperation.

APM-00004E An error occurred while submittingactivities to the Executer at initializationtime



Operator Response: Delete the activity plan that contains thesubmitted activities from the database manually, and recreate it.

APM-00005F An unrecoverable error occurred whileconnecting to the RIM object. ActivityPlanner Engine cannot start



Operator Response: Carry out the following steps:

1. Verify that the RIM parameters are correct using thewgetrim command

2. Verify whether a connection to the database was established

3. Close the Activity Planner GUI (if still open)

4. Stop the RIM process using the operating system’s taskmanagement software (the RIM process name always startswith the characters ‘RIM’)

5. Correct the error that caused the problem

6. Restart the Activity Planner engine either by closing andreopening the Activity Planner GUI or by issuing thecommand wstartapm.

APM-00006I A request to submit the plan name hasbeen received


Message Variables:name The name of the plan.

System Action: The processing continues. Activity Plannerengine verifies the conditions to execute the plan and all theactivities that the plan contains.


APM-00001F • APM-00006I

54 Version 4.1

APM-00007F An exception exception message occurredwhile the plan name was being submitted.The Activity Planner Engine continueswith the next request



The exception message generated by the system.name The name of the plan.

System Action: The plan is not submitted. Activity Plannerengine processes the other requests.

Operator Response: Analyze the exception message, correctthe error and resubmit the plan.

APM-00008I The plan name was successfully submitted





APM-00009I An event for the ″start not before″ timerelated to plan name was added to theTME Job Scheduler. The scheduled dateis date

Explanation: The plan specified has been submitted to startnot before the specified scheduled date and time. The JobScheduler has recorded an entry for the date and time when itwill submit the plan to the Activity Planner engine.

Message Variables:date The date when the plan will be submitted to be run.name The name of the plan.

System Action: The processing continues. When the indicateddate is reached, the TME® Job Scheduler sends to the ActivityPlanner engine an event to start running the plan.


APM-000010I An event for the ″complete not after″time related to plan name was added tothe Job Scheduler. The scheduled date isdate

Explanation: The plan has been submitted to complete notlater than the specified date and time. The TME Job Schedulerhas recorded a date and time after which the plan cannot becompleted.

Message Variables:name The name of the plandate The date by which the plan must be complete

System Action: When the specified date and time is reached,the TME Job Scheduler sends an event to Activity Plannerengine to stop the execution of the plan. If the plan has already

completed the event is ignored. If the plan has not completedand the cancel at cut off option has been set, the currentactivities of the plan are stopped and the plan status is set tothe cancelled status. In all other circumstances, activitiesalready submitted are completed, but activities that are waitingto be started are cancelled.


APM-000011W The recursion mechanism was stopped forthe plan name at recursion recursionbecause the expiration time was reached

Explanation: Because the expiry date and time has beenreached the submission of the recursive plan is stopped.

Message Variables:name The name of the plan.recursion

The recursion number of the plan.

System Action: The system does not schedule any moreinstances of the activity plan.


APM-000012I A recursion mechanism event for planname recursion recursion was added to theJob Scheduler at date date

Explanation: A recursion request has been added to the JobScheduler for the specified date. When the scheduled date isreached, Job Scheduler sends an event to the Activity Planengine to run the plan. This message is generated for eachinstance of the plan to be run, as determined by the recursionparameters; for example, if you have defined a weeklyrecursion to occur 6 times, six dates will be recorded by theJob Scheduler.


The recursion number of the plan.date The date when a new instance for the plan is to be

run.

System Action: Processing continues. When the date isreached the Job Scheduler sends an event to the ActivityPlanner engine to run the plan.

Operator Response: Check that the date generated is whatyou wanted when you defined the recursion parameters.

APM-000013E You gave an incorrect value for thetimeInterval parameter. The correctformat is hh:mm


System Action: The plan is not submitted or the cleanupoperation is not executed.

Operator Response: Enter a valid value for the timeIntervalparameter.

APM-00007F • APM-000013E


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

APM-000014E You gave an incorrect value for the″refDate″ (reference date) parameter. Thecorrect format is yyyy-MM-dd


System Action: The cleanup operation is not performed.

Operator Response: Enter a valid value for the “refDate”parameter.

APM-000016E You gave an incorrect value for the″refTime″ (reference time) parameter. Thecorrect format is hh:mm (hours in therange 0-23)



Operator Response: Enter a valid value for the “refTime”parameter.

APM-000017E You gave an incorrect value for the″daysOfMonth″ parameter. The correctsyntax is “dayNum[,dayNum]”. Validvalues for dayNum are in the range 1-31

Explanation: The message is incorrect. It should be: Yougave an incorrect value for the ″daysOfMonth″ parameter.The correct syntax is “dayNum[,dayNum] [, dayNum1 -dayNum2]”. Valid values for dayNum are in the range 1-31.This syntax allows you to specify one or more days, or a rangeof days.

You have entered an incorrect value for the parameter, whichshould be in the syntax given above.

System Action: The plan is not submitted or the cleanupoperation is not executed

Operator Response: Enter a valid value for the“daysOfMonth” option and resubmit the operation.

APM-000018F An exception exception message wasreceived from Tivoli ManagementFramework while the parameters for theautomatic cleanup of the status ofsubmitted plans were being saved

Explanation: An exception message has been received fromthe Tivoli Management Framework saving the cleanupparameters.



System Action: The cleanup operation is not executed. TheActivity Planner engine continues to perform other operations.

Operator Response: Analyze the exception message andverify the correctness of the cleanup parameters.

APM-000019E You gave an incorrect value for the″olderThan″ parameter. Valid values arenon-negative numbers.


System Action: The cleanup operation is not executed. TheActivity Planner engine continues to perform other operations.

Operator Response: Enter a valid value for the “olderThan”parameter.

APM-000020E You gave an incorrect value for the″daysOfWeek″ parameter. The correctsyntax is “dayNum[,dayNum]”. Validvalues for dayNum are in the range 1-7

Explanation: The message is incorrect. It should be: Yougave an incorrect value for the ″daysOfWeek″ parameter.The correct syntax is “dayNum[,dayNum] [, dayNum1 -dayNum2]”. Valid values for dayNum are in the range 1-7.This syntax allows you to specify one or more days, or a rangeof days.

You have entered an incorrect value for the parameter, whichshould be in the syntax given above.

System Action: The plan is not submitted or the cleanupoperation is not executed

Operator Response: Enter a valid “daysOfWeek” parameterand resubmit the operation.

APM-000021E You gave an incorrect value for the″Status″ parameter. Allowed values are″c″ (Canceled), ″s″ (Successful) or ″e″(Failed). You can specify multiple valuesseparated by commas.

Explanation: You entered an incorrect value for the “status”parameter. Valid values are:c Canceleds Successfule Failed


Operator Response: Enter a valid value for the “status”parameter.

APM-000022E You gave an incorrect value for the″dateInterval″ parameter. The correctformat is yy/mm/dd

Explanation: You entered an incorrect value for the dateinterval option. The correct date interval format is yy/mm/dd.

System Action: The plan is not submitted or the cleanupoperation is not executed.

Operator Response: Enter a valid value for the date interval.

APM-000014E • APM-000022E

56 Version 4.1

APM-000023E An error occurred while the trace servicefor process name was being initialized.


Message Variables:name The name of the process

System Action: The trace was not activated.

Operator Response: Check that the value of the tracekeyword in the .ini file is correct. If it is not, enter a validvalue. Verify also that the user who submits the request haswrite access on the directories where the trace files are written.Resubmit the operation.

APM-000024F Invalid syntax: the name of the filecontaining the plan to be imported ismissing

Explanation: You did not enter the name of the file thatcontains the plan.

System Action: The plan is not imported.

Operator Response: Enter the correct name of the file thatcontains the plan and resubmit the operation.

APM-000027F An unexpected exception exceptionmessage was received when the file namewas accessed



The exception message generated by the systemname The name of the file that the system was trying to

access when it encountered the error.


Operator Response: Check the validity of the file, ensuringthat is, for example, not in use, not corrupt, and not locked.Correct the error and resubmit the operation.

APM-000028F An exception exception message wasreceived while the Activity Plan DefinitionFile stored in file name was being parsed



The exception message generated by the system.name The name of the activity plan definition file being

parsed.

System Action: The operation is not performed.

Operator Response: Analyze the exception message tounderstand why the activity plan definition file is not correct.For example, the XML tags may not be correct. Rectify theerror and resubmit the operation.

APM-000029E A plan with name name is already presentin the database. The plan was notimported. Submit the operation again,using the -o option to force the import





Operator Response: Import a plan with a different name oruse the -o option to force the import.

APM-000030I Plan name was successfully added to theactivity plan database


Message Variables:name The name of the submitted plan.

System Action: The process continues.


APM-000031F An unexpected exception exceptionmessage was received that executed thename command

Explanation: The message is incorrect. It should be: Anunexpected exception exception message was received whenexecuting the name command.


The exception message generated by the system.name The name of the command.


Operator Response: Analyze the exception message, correctthe error and resubmit the command.

APM-000032I The activity plan database is empty

Explanation: You submitted an operation that needs to accessthe Activity Plan repository, for example a delete operation, butthe repository is empty.



APM-000023E • APM-000032I


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

APM-000033I Plan name was removed from the ActivityPlan database





APM-000034I Plan name was not removed from activityplan database, because it is not inRepository



System Action: The submitted operation is not performed.

Operator Response: Verify if the plan name is correct.Repeat the operation specifying the correct name of the plan.

APM-000035I Plan name is not in activity plan database



System Action: No operation is performed.

Operator Response: Verify if the plan name is correct.Repeat the operation specifying the correct name of the plan.

APM-000036W The activity plan specified does not havean active instance

Explanation: You requested a pause, resume, start or canceloperation, on a plan that is not active.

System Action: No operation is performed on the planspecified.


APM-000037I Status for plan name recursion removedfrom the activity plan database

Explanation: The status for the specified plan with thespecified recursion number has been removed from the activityplan database.


The recursion number of the plan, if appropriate.



APM-000038I Status for plan name recursion not foundin the activity plan database




System Action: The processing continues on the othersactivity plans.


APM-000039I Plan name successfully submitted





APM-000040I The following error occurred during anattempt to submit the plan: error message


Message Variables:error message

The message that explains the error.

System Action: Operation failed. The plan is not submitted.

Operator Response: Analyze the error message, correct theerror and resubmit the activity plan.

APM-000042E An error occurred while activity planinformation was being accessed

Explanation: An error occurred accessing the database to readthe activity plan information.


Operator Response: Verify that the specified plan exists

APM-000043E An error occurred while activity planactivities information was being accessed

Explanation: An error occurred accessing the database to readthe activities information of the activity plan.


Operator Response: Take the following steps:

1. Verify that the RIM parameters are correct using thewgetrim command

2. Verify that the connection to the database has beenestablished

3. Stop the Activity Planner engine by closing the ActivityPlanner GUI or by using the wstopapm command

APM-000033I • APM-000043E

58 Version 4.1

4. Verify that the RIM process has stopped, using theoperating system’s task management software (the RIMprocess name always starts with the characters ‘RIM’), andend the process if it is still running

5. Restart the Activity Planner engine by opening the ActivityPlanner GUI or using the wstartapm command

APM-000044F The Activity Plan manager is notavailable



Operator Response: Restart the Activity Planner engine usingthe wstartapm command.

APM-000045I The requested control command has beensuccessfully submitted.




APM-000046E Activity activity name is not an activity ofplan plan name plan ID


Message Variables:activity name

The name of the activityplan name

The name of the planplan ID The identifier of the plan


Operator Response: Specify the name of an activity thatbelongs to the activity plan when you resubmit the operation.

APM-000047F An error occurred while the activerecursion instance of plan name was beingdetermined




Operator Response: Verify that the connection to thedatabase has been established and resubmit the operation.

APM-000048F The status information for the activityplan name recursion was removed. Therequested operation was not executed.

Explanation: An error occurred because the specified planinstance does not exist.


The number of the recursion.


Operator Response: Verify that the plan name is correct, andthat the final recursion has not been reached. Correct the errorand resubmit the operation.

APM-000049F An error occurred while the activity planstatus information was being accessed.



Operator Response: Verify that the connection to thedatabase has been established. Correct the error and resubmitthe operation.

APM-000050F The operation operation name on planplan name recursion was not executedbecause the plan status was notcompatible with the operation


Message Variables:operation name

The name of the operation.plan name

The name of the plan.recursion



Operator Response: Verify that the plan status is compatiblewith the operation you submitted. Correct the discrepancy andresubmit the operation.

APM-000051F An error occurred while the statusinformation for activity activity name inplan plan name recursion was beingaccessed



The name of the activity.plan name



APM-000044F • APM-000051F


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)


Operator Response: Verify that the connection to thedatabase has been established. Correct the error and resubmitthe operation.

APM-000052F Operation operation name on activityactivity name of plan plan name recursionwas not executed because the status wasnot compatible with the operation


Message Variables:operation name

The name of the operation.activity name





Operator Response: Verify that the status of the activity iscompatible with the operation. Correct the discrepancy andresubmit the operation.

APM-000053F The following error occurred during anattempt to import plan: error message


Message Variables:error message

The error message generated by the system.


Operator Response: Analyze the error message. Verify thatthe connection to the database has been established, and importthe plan again.

APM-000054I Plan exported successfully




APM-000055I An error occurred while plan name wasbeing exported

Explanation: See message


System Action: The operation is not performed

Operator Response: Verify that the connection to thedatabase has been established.

APM-000056E Activity activity name of plan plan namerecNum recursion not be restartedbecause not in failed or canceled status

Explanation: A restart operation has been requested for thespecified activity of the specified plan but the activity is notcompleted. You can request a restart operation only for theactivities that are in the canceled or failed status





System Action: The operation is not performed on thespecified activity. If you requested the restart operation on morethan one activity, the processing continues for the otheractivities

Operator Response: Verify that the status of the activity iscorrect.

APM-000057I Syntax error for recursion number value

Explanation: You specified an incorrect value for therecursion number.


Operator Response: Verify the recursion number andresubmit the operation using the correct recursion number.

APM-000058F An exception exception message wasreceived from the Tivoli ManagementFramework while the parameters for theautomatic cleanup of the status ofsubmitted plans were being accessed

Explanation: See message




Operator Response: Verify that the parameters of theautomatic cleanup are correct and resubmit the cleanup.

APM-000059F An error occurred while the engine wasbeing updated with new metrics forautomatic cleanup. Stop and try to restartthe engine

Explanation: An error occurred when the engine was updatedwith the new parameters for an automatic cleanup.

System Action: The operation is not performed. Theprocessing stops.

Operator Response: Stop the engine and restart it.

APM-000052F • APM-000059F

60 Version 4.1

APM-000060I Automatic cleanup settings

Frequency frequency informationReference date: reference dateReference time: reference timeForce option: force optionTime type: time typeTime elapsed since plan started/completed: time elapsedStatus: status type


Message Variables:frequency information

The information to schedule the repetitive running ofthe plan.

reference dateThe date when the cleanup process starts.

reference timeThe time when the cleanup process starts.

force optionThe value of the force option.

time typeThe type of plans to remove. The possible values are:c completeds started

time elapsedThe number of days that must have elapsed since thecompletion or start of a plan for the plan to beincluded in the cleanup. The type of plan (completedor started) depends on the value that you specified inthe time type parameter.

status typeThe status of the plan to be removed. Possible valuesare:s Plans successfully completede Plans that have completed but not

successfullyc Plans that have completed and have been

canceled



APM-000068I Activity activity name of plan plan namerecNum recursion has been submitted






System Action: The indicated activity is submitted to theActivity Planner engine.


APM-000069I Activity activity name of plan plan name-recNum recursion - completed in statusstatus type





The recursion number of the plan, if appropriate.status type

The status of the plan. Possible values are:c Canceleds Successfule Failed



APM-000070I Plan name completed in status status


Message Variables:name The name of the plan.status The status of the plan. Possible values are:

c Canceleds Successfule Failed


Operator Response: Check the plan status report.

APM-000071I Pause Request was received for Activityactivity name (of plan plan name recursion)

Explanation: You submitted a pause request for the specifiedactivity.





System Action: The Activity Planner engine verifies if thestatus is compatible with the request and submits the pauserequest.


APM-000060I • APM-000071I


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

APM-000072E Activity activity name of plan plan namerecNum recursion not paused as required

Explanation: The specified activity has not been paused asyou required. The specified activity has been started before thepause request was submitted.





System Action: Unable to pause the activity because it hasalready been submitted.

Operator Response: Verify that the name of the activity iscorrect.

APM-000074I Cancel request was received for Activityactivity name (of plan plan name -recNumrecursion) that is in status status

Explanation: You submitted a cancel request for the specifiedactivity.




The recursion number of the plan, if appropriate.status The status of the plan. Possible values are:

c Canceleds Successfule Failed

System Action: The Activity Planner engine verifies if thestatus is compatible with the request and submits the cancelrequest.


APM-000075E The specified application has not beenregistered to the Activity Plan Manager



Operator Response: Verify that the name of the application iscorrect.

APM-000076E An error occurred while accessing thedatabase to verify the specifiedapplication is registered to the ActivityPlan Manager

Explanation: See message. A connection problem accessingthe database can cause the exception error.


Operator Response: Check that the Activity Planner databasetables are accessible, and resubmit the operation.

APM-000077E An error occurred while updating thedatabase with the new error levelinformation

Explanation: See message. A connection problem accessingthe database can cause the exception error.


Operator Response: Check that the Activity Planner databasetables are accessible, and resubmit the operation.

APM-000078I Error level information successfullyupdated


System Action: The command is successfully performed.


APM-000079I Clean-up operation is ready to execute

Explanation: The cleanup operation is ready to be executed atthe time you specified and using the parameters you set.

System Action: Activity Planner engine submits the cleanupoperation to be executed.


APM-000080F Clean-up parameters are not loadedbecause an exception exception messagewas encountered.

Explanation: An exception occurred reading the cleanupparameters.



System Action: The cleanup parameters are not set and thecleanup operation is not performed.

Operator Response: Check the cleanup parameters andensure they are correctly specified; resubmit the operation.

APM-000072E • APM-000080F

62 Version 4.1

APM-000081I Clean-up operation submitted

Explanation: The cleanup operation has been successfullysubmitted.

System Action: All the plans that satisfy the cleanupparameters are being deleted from the database.


APM-000082I Resume request was received for Activityactivity name of plan plan name recursion

Explanation: You submitted a resume request for thespecified activity.





System Action: Activity Planner engine verifies if the status iscompatible with the request and submits the resume request.


APM-000083I The automatic clean-up rules wassuccessfully updated.

Explanation: The wsfdpln command, used to set the rules toperform the automatic cleanup of the plan status in thedatabase, has been successfully executed. You can see thesettings using the wsfdpln -S command.

System Action: The next time you run the Activity Plannercleanup, the engine will use the parameters that you specified.If the new settings are recursive, the cleanup operation usingthe new settings will take place automatically at the firstrecursion date.


APM-000084E An instance of a plan with the specified idid was not found in the database.


Message Variables:id The plan identifier.

System Action: The command is not executed.

Operator Response: Supply a different plan id beforeresubmitting the command.

APM-000085E A submitted plan called name was notfound in the database



System Action: The command is not executed. The processingstops.

Operator Response: Supply a different plan name beforeresubmitting the command.

APM-000086F An unexpected exception exceptionmessage was received trying to accessinformation in the database

Explanation: See message. A connection problem accessingthe database can cause the exception error



System Action: The operation is not performed. theprocessing stops.


APM-000087E Invalid target specification for the planname

Explanation: One or more targets for the submitted plancannot be found.


System Action: The operation is not performed on thespecified plan. The processing continues for the other plans.

Operator Response: Verify the correctness of the specifiedtargets and resubmit the plan.

APM-000088E No valid targets for activity activity nameof plan plan name

Explanation: The specified target on which to submit theactivity is not recognized.



The name of the plan.

System Action: The operation is not performed on thespecified activity. The processing continues for the otheractivities.

Operator Response: Verify the correctness of the specifiedtargets and resubmit the activity using the restart operation.

APM-000081I • APM-000088E


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

APM-000089I An event ″Open window″ time related toactivity activity name of plan plan namerecursion recursion was added to the JobScheduler. The scheduled date is date

Explanation: An event of the indicated plan has beensubmitted to start when the time window’s open date and timeis reached. The TME Job Scheduler has recorded an entry forthe date and time when it will submit the plan to the ActivityPlanner engine.




The recursion number of the plan, if appropriate.date The date and time when the activity is performed.

System Action: When the specified time is reached, the JobScheduler sends the event to the Activity Planner engine to besubmitted to the application.


APM-000090I An event ″Close window″ time related toactivity activity name of plan plan namerecursion recursion was added to theTME Job Scheduler. The scheduled dateis date

Explanation: An event of the indicated plan has beensubmitted to stop when the time window’s close date and timeis reached. The TME Job Scheduler has recorded an entry forthe date and time when it will request the Activity Plannerengine to stop the plan.




The recursion number of the plan, if appropriate.date The date and time when the activity is performed.

System Action: When the specified time is reached, the TMEJob Scheduler sends a command to the Activity Planner engineto stop the indicated activity. If the Activity Planner engine isstill performing the activity, the activity will be paused.


APM-000091E Status for plan name, recursion numberrecursion not removed from databasebecause the plan is not in a final status

Explanation: The status of the specified plan was notremoved because it is not in the completed or cancelled status.You can remove a status only if it is in the completed orcancelled status.




Operator Response: If you want to stop the plan you mustpause the plan.

APM-000093I A request was received to delete thestatus of plan plan name recNum recursion

Explanation: You submitted a request to delete the status ofthe specified plan.

Message Variables:plan name



System Action: The operation is submitted. The ActivityPlanner engine deletes the plan status if the specified plan hasbeen submitted.


APM-000094I A request was received to delete theActivity Plan Template activity plantemplate

Explanation: You submitted a request to delete the specifiedActivity Plan Template

Message Variables:activity plan template

The name of the activity plan template

System Action: The operation is submitted. Activity Plannerengine deletes the template if it is in the plan repository.


APM-000095F Managing submission events for plan planname -recNum recursion the exceptionexception message was occurred





APM-000089I • APM-000095F

64 Version 4.1

exception messageThe exception message generated by the system.

System Action: The plan is not submitted.

Operator Response: Analyze the exception message in thelog file, correct the error and resubmit the plan.

APM-000096I Status of Plan with Plan ID: plan idrecNum recursion removed duringCleanUp Operation.

Explanation: You submitted a request to perform a cleanupoperation. The status of the indicated plan is deleted because itsatisfies the parameters specified for the cleanup operation.

Message Variables:plan id The identifier of the plan.recursion


System Action: The status of the plan is deleted. The systemcontinues checking if there are other plans that satisfy theparameters specified for the cleanup.


APM-000097I Activity Plan (already Submitted) planname was removed in Database duringCleanUp Operation

Explanation: You submitted a request to perform the cleanupoperation. The indicated plan is deleted because it satisfies theparameters specified for the cleanup operation.



System Action: The activity plan instance is deleted. Thesystem continues checking if there are other plans that satisfythe parameters specified for the cleanup.


APM-000098I An event to start the CleanUp operationwas added to the TME Job Scheduler.The scheduled date is scheduled date

Explanation: The cleanup operation has been submitted tostart on the indicated scheduled date and time. Alternatively, theoperation has been submitted to start recursively and theindicated date is one of the dates on which the cleanupoperation will be run; in this case this message will be one ofas many messages as are determined by the recursionparameters. The Job Scheduler has recorded an entry for thedate and time when it will submit the cleanup operation to theActivity Planner engine.

Message Variables:scheduled date

The date when the activity is performed.

System Action: The processing continues. When the indicateddate is reached, the TME Job Scheduler sends to the ActivityPlanner engine an event to start the cleanup operation.


APM-000099F An unexpected exception exceptionmessage was received trying to modifyinformation in the database

Explanation: An unexpected exception has been receivedaccessing the database. A connection problem accessing thedatabase can cause the exception error.




Operator Response: Verify the connection to the database,correct the problem and resubmit the operation.

APM-000100I Current recursion settings for plan nameFrequency: frequency information

Explanation: The message displays the current settings of therecursion for the specified plan.

Message Variables:name The name of the plan.frequency information

The frequency information.



APM-000101I The recursion mechanism for the planname was successfully disabled





APM-000102I A Report was returned for Activity name:Operation ID id was returned on Codelevel: return code, on number targets, Themessage returned by application is:message.

Explanation: The application performed the indicatedoperation on the specified activity. The application sends areport to the Activity Planner that outlines and describes thestatus of the operation.

Message Variables:name The name of the activityid The operation identifierreturn code

The return code of the operation.

APM-000096I • APM-000102I


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

number The number of targets on which the operation hasbeen performed.

message The text of the message.

System Action: Processing continues for other activities,operations, return codes and messages.


APM-000103I The request operation for activity activityname of plan plan name -recNum recursionhas been accomplished

Explanation: The operation you requested on the specifiedactivity has been submitted to the application.

Message Variables:operation

The operation you requested.activity name


The identifier of the operation.recursion


System Action: The Activity Planner engine sends therequested operation for the specified activity to the application.


APM-000104I operation request was received for Planname -recNum recursion

Explanation: The requested operation on the indicated activityplan has been received by the Activity Planner engine.

Message Variables:operation

The operation you requested.name The name of the plan.recursion


System Action: The request has been accepted by ActivityPlanner engine and it is waiting that the activities of the plansare submitted to the applications.


APM-000105E command name command not performedon activity activity name of plan plan namebecause activity not existing

Explanation: The specified command has been submitted onan activity that does not exist for the indicated plan.

Message Variables:command name

The name of the command.activity name



System Action: The operation failed.

Operator Response: Determine why the activity is incorrect,correct the error and resubmit the command.

APM-000106E command name command not performedon plan plan name because the plan doesnot have an active instance

Explanation: The specified command is not performed on thespecified plan because the database does not contain any activeinstance for the plan.

Message Variables:command name

The name of the commandplan name

The identifier of the operation


Operator Response: Check that the name of the plan isspecified correctly.

APM-000107I APM- Engine process is startedsuccessfully

Explanation: The Activity Planner engine process is started. Itis ready to perform all the operations on the Activity Planner.



APM-000108I An old Clean-Up request was returnedfrom TME Scheduler, but it is droppedand replaced by another Clean-Uprequest already submitted.

Explanation: The Job Scheduler has submitted a new cleanuprequest to the Activity Planner engine, before an existingrequest has been processed. The existing request is deleted andthe new request is processed.

System Action: The Activity Planner engine processes thenew cleanup request and deletes the old request.


APM-000109E The name operation failed to execute.

Explanation: The operation you requested (for example,pause, cancel, or resume) failed.

Message Variables:name The name of the operation

System Action: The requested operation is not performed.

Operator Response: Analyze the log file to check the activityon which the operation failed, correct the error and resubmit theoperation.

APM-000103I • APM-000109E

66 Version 4.1

APM-000110E Error retrieving lock information fromdatabase.

Explanation: An error occurred trying to display the list oflocked plans.



APM-000111I Plan successfully unlocked




APM-000112E Error unlocking the plan




APM-000113E The specified plan is not locked


System Action: Operation failed. The processing continues.

Operator Response: Verify the name of the plan.

APM-000114E Operation unsuccessful: the specified planis in use by another user

Explanation: You tried to delete a plan that is in use byanother user.



APM-000116E Target target name does not belong to theactivity activity name

Explanation: You specified a target that does not exist.

Message Variables:target name

The name of the target.activity name

The name of the activity.


Operator Response: Verify the target name and resubmit theoperation.

APM-000110E • APM-000116E


2.A

ctivityP

lann

erM

essages

(AP

M:n

nn

nn

nX

)

68 Version 4.1

Glossary

A

accept operationIn Tivoli Software Distribution, Version 4, a change management operation that deletes the backup package sothe previous operation can no longer be undone.

actionAn operation on a managed object, the semantics of which are defined as part of the managed object classdefinition.

action bodyIn the Tivoli Enterprise Console product, the part of a rule that contains actions to take if the rule evaluates totrue.

activityIn Tivoli Software Distribution, Version 4.1, an operation that is contained in an activity plan; operations caninclude Tivoli Software Distribution operations and Tivoli Management Framework task library tasks. Activitydefinitions include: the operation to be performed, the execution time, the conditions for executing the operation,and the targets of the operation. See activity plan and execution time.

activity planIn Tivoli Software Distribution, Version 4.1, a set of activities performed on a set of targets on a specifiedschedule. An activity plan specifies: the activities contained in the plan, the schedule for execution, recursioninformation, notification information, and targets. See also activity.

Activity Plan EditorIn Tivoli Software Distribution, Version 4.1, the tool, which has a graphical user interface, that is used togenerate or update an activity plan. See also activity plan.

Activity Plan MonitorIn Tivoli Software Distribution, Version 4.1, the tool, which has a graphical user interface, that is used to submit,monitor, and control the execution of an activity plan. See also activity plan.

admin roleSee authorization role.

administratorSee Tivoli administrator.

administrator collectionIn a Tivoli environment, the collection for administrator objects that is generated by Tivoli Enterprise software.This container is represented by the Administrator icon on the Tivoli desktop; opening the icon provides access toinformation about each Tivoli administrator.

agent(1) In systems management, a user that, for a particular interaction, has assumed an agent role. (2) An entity thatrepresents one or more managed objects by (a) emitting notifications regarding the objects and (b) handlingrequests from managers for management operations to modify or query the objects. (3) A system that assumes anagent role.

agent roleIn systems management, a role assumed by a user in which the user is capable of performing managementoperations on managed objects and of emitting notifications on behalf of managed objects.

authorization(1) In computer security, the right granted to a user to communicate with or make use of a computer system.(2) An access right. (3) The process of granting a user either complete or restricted access to an object, resource,or function.


Glo

ssary

authorization roleIn a Tivoli environment, a role assigned to Tivoli administrators to enable them to perform their assigned systemsmanagement tasks. A role may be granted over the entire Tivoli management region or over a specific set ofresources, such as those contained in a policy region. Examples of authorization roles include: super, senior,admin, and user.

AutoPackIn Tivoli Software Distribution, Version 4, a tool that enables a Tivoli administrator to create a software package.AutoPack produces the software package by (a) taking snapshots of the drive and system configuration beforeand after the installation of an application on a PC and (b) capturing the differences between these snapshots inthe software package.

C

change managementIn Tivoli Software Distribution, the process of planning (for example, scheduling) and controlling (for example,distributing, installing, and tracking) software changes over a network.

classIn object-oriented design or programming, a model or template that can be instantiated to create objects with acommon definition and therefore, common properties, operations, and behavior. An object is an instance of aclass.

CLISee command line interface (CLI).

clientA computer system or process that requests a service of another computer system or process that is typicallyreferred to as a server. Multiple clients may share access to a common server.

collectionIn a Tivoli environment, a container that groups objects on a Tivoli desktop, thus providing the Tivoliadministrator with a single view of related resources. Either the Tivoli Management Framework or a Tivoliadministrator can create a collection. The contents of a collection are referred to as its members. Examples ofcollections include the administrator collection and the generic collection; the administrator collection is anexample of a collection generated by the Tivoli Management Framework.

command line interface (CLI)A type of computer interface in which the input command is a string of text characters. Contrast with graphicaluser interface (GUI).

commit operationIn Tivoli Software Distribution, Version 4, a change management operation that causes all the updates prepared inthe preparation phase to take effect.

commit phaseIn Tivoli Software Distribution, Version 4, the phase of transactional mode operation in which previouslyprepared actions are committed, causing all of the updates to take effect. See also transactional mode.

configuration repositoryIn a Tivoli environment, a RIM repository that contains information that is collected or generated and stored byTivoli Inventory and Tivoli Software Distribution. For example, Tivoli Inventory stores information regardinghardware, software, system configuration, and physical inventory; and Tivoli Software Distribution storesinformation regarding software package and file package operations.

CRCSee cyclic redudancy check (CRC).

cyclic redundancy check (CRC)(1) A redundancy check in which the check key is generated by a cyclic algorithm. (2) A system of errorchecking performed at both the sending and receiving station after a block-check character has been accumulated.

authorization role • cyclic redundancy check (CRC)

70 Version 4.1

D

database mode profile managerSee profile manager.

dataless mode profile managerSee profile manager.

default policyIn a Tivoli environment, a set of resource property values that are assigned to a resource when the resource iscreated.

deployment managementThe Tivoli management discipline that addresses the automation of configuration and change managementactivities for the ever-evolving components of a network computing system.

differencing phaseIn Tivoli Software Distribution, Version 4, the process by which AutoPack examines and compares before andafter snapshots and, for each difference found, generates the related action and adds it to a software package.

disconnected modeIn Tivoli SecureWay® Global Sign-On, a method of operation that enables users to log on to targets while notconnected to a network, such as from laptops while mobile.

disconnected target commandIn Tivoli Software Distribution, Version 4, a command that is run from the command line of a target system thatis not connected to the Tivoli management region server.

discovered software packageIn Tivoli Software Distribution, Version 4.1, an application that was installed on an endpoint independently ofTivoli Software Distribution and that was later added to the endpoint’s catalog and given a status of “installedand discovered,” using a Tivoli Software Distribution disconnected target command.

Distributed Monitoring proxySee endpoint.

Distribution Status consoleAn MDist 2 interface provided by Tivoli Management Framework that enables administrators to monitor andcontrol distributions across a network. See also MDist 2.

domainThat part of a computer network in which the data processing resources are under common control.

domain nameIn the Internet suite of protocols, a name of a host system. A domain name consists of a sequence of subnamesseparated by a delimiter character. For example, if the fully qualified domain name (FQDN) of a host system isralvm7.vnet.ibm.com, each of the following is a domain name:

¶ ralvm7.vnet.ibm.com

¶ vnet.ibm.com

¶ ibm.com

E

endpoint(1) In a Tivoli environment, a Tivoli client that is the ultimate recipient for any type of Tivoli operation. (2) In aTivoli environment, a Tivoli service that runs on multiple operating systems and performs Tivoli operations onthose systems, thereby enabling the Tivoli Management Framework to manage the systems as Tivoli clients.

endpoint gatewaySee gateway.

database mode profile manager • endpoint gateway


Glo

ssary

endpoint listIn a Tivoli environment, a list of all endpoint clients in the Tivoli management region with their assignedgateways. See endpoint manager.

endpoint managerIn a Tivoli environment, a service that runs on the Tivoli server, assigns endpoint clients to gateways, andmaintains the endpoint list.

endpoint methodIn a Tivoli environment, a method that runs on an endpoint client as the result of a request from other managedresources in the Tivoli management region. Results of the method are forwarded first to the gateway, then to thecalling managed resource.

event adapterIn a Tivoli environment, software that converts events into a format that the Tivoli Enterprise Console productcan use, and forwards the events to the event server. Using the Tivoli Event Integration Facility, an organizationcan develop its own event adapters, tailored to its network environment and specific needs.

event cardIn Tivoli NetView®, a graphical representation, resembling a card, of the information contained in an event sentby an agent to a manager reflecting a change in the status of one of the agent’s managed nodes.

event consoleIn the Tivoli Enterprise Console product, a graphical user interface (GUI) that enables system administrators toview and respond to dispatched events from the event server. The Tivoli Event Integration Facility does notdirectly use or affect event consoles.

event serverIn the Tivoli Enterprise Console product, a central server that processes events. The event server creates an entryfor each incoming event and evaluates the event against a rule base to determine whether it can respond to ormodify the event automatically. The event server also updates the event consoles with the current eventinformation. If the primary event server is not available, events can be sent to a secondary event server.

execution timeIn Tivoli Software Distribution, Version 4.1, the time frame within which an activity must be executed. Timeframe specifications include the days of the week and time intervals within a day.

F

fanoutIn communication, the process of creating copies of a distribution to be delivered locally or to be sent throughthe network.

file packageIn Tivoli Software Distribution, Version 3, a profile. The file package describes which files and directories todistribute and how to distribute them.

file package blockIn Tivoli Software Distribution, Version 3, a static file containing (a) the file package definition, (b) the filepackage attributes, (c) the source files and directories, and (d) the configuration programs of the file package.

file package definitionIn Tivoli Software Distribution, Version 3, an ASCII file that identifies the contents and characteristics of a filepackage.

fpblockSee file package block.

endpoint list • fpblock

72 Version 4.1

G

gatewayIn a Tivoli environment, software running on a managed node that provides all communication services betweena group of endpoints and the rest of the Tivoli environment. This gateway includes the multiplexed distribution(MDist) function, enabling it to act as the fanout point for distributions to many endpoints.

generic collectionIn a Tivoli environment, a collection that contains objects representing resources of any type.

group ID (GID)In the AIX® operating system, a number that corresponds to a specific group name. The group ID can often besubstituted in commands that take a group name as a value.

group profileIn Tivoli User Administration, a profile that a Tivoli administrator uses to define and modify information about agroup of users.

H

hostIn a Tivoli environment, a computer that serves as a managed node for a profile distribution.

I

install imageSee Tivoli install image.

install operationIn Tivoli Software Distribution, Version 4, a change management operation that installs a software package on aselected group of targets.

installation repository (IR)In Tivoli Software Installation Service (SIS), the directory that contains reusable installation images and otherdata that is used by SIS.

IPX AgentIn a Tivoli environment, a PC agent that runs on IPX/SPX. An IPX Agent can be the client only of aNetWare-managed site.

IRSee installation repository.

J

jobIn a Tivoli environment, a resource consisting of a task and its pre-configured execution parameters. Amongother things, the execution parameters specify the set of hosts on which the job is to execute.

L

local distributionIn a Tivoli environment, a distribution to target machines in the same Tivoli management region as the sourcemachine.

local overrideIn a Tivoli environment, a feature of all profile-based Tivoli applications—except for Tivoli SoftwareDistribution—that allows changes made at the endpoint profile to override those in a distributed profile.

gateway • local override


Glo

ssary

M

managed nodeIn a Tivoli environment, any managed resource on which the Tivoli Management Framework is installed.

managed object(1) A component of a system that can be managed by a management application. (2) The systems managementview of a resource that can be managed through the use of systems management protocols.

managed resourceIn a Tivoli environment, any hardware or software entity (machine, service, system, or facility) that is representedby a database object and an icon on the Tivoli desktop. Managed resources must be a supported resource type ina policy region and are subject to a set of rules. Managed resources include, but are not limited to, managednodes, task libraries, monitors, profiles, and bulletin boards.

management by subscriptionIn a Tivoli environment, the concept of managing network resources by creating sets of profiles and distributingthe profiles (through profile managers) to physical entities (Tivoli resources), called subscribers.

management regionIn Tivoli NetView, the set of managed objects on a particular map that defines the extent of the network that isbeing actively managed. The management region may vary across maps.

MDistA multiplexed distribution service provided by Tivoli Management Framework that enables efficient transfer ofdata to multiple targets. See also MDist 2.

MDist 2A multiplexed distribution service provided by Tivoli Management Framework that enables efficient transfer ofdata to multiple targets. In addition in the features provided by MDist, MDist 2 provides features for monitoringand controlling a distribution throughout its life cycle. See also Distribution status console and MDist.

methodIn object-oriented design or programming, the software that implements the behavior specified by an operation.

Migration Control CenterIn Tivoli Software Distribution, Version 4.1, the tool, which has a graphical user interface, that enables systemadministrators to migrate from the Tivoli NetView Distribution Manager family of products to Tivoli SoftwareDistribution, Version 4.1. The Migration Control Center migrates, for example, change files to software packageblocks, procedures to tasks in a task library, and authorization profiles to administrators.

multiplexed distribution (MDist)The mechanism used by Tivoli Enterprise applications to transfer data to multiple targets. Tivoli ManagementFramework provides two multiplexed distribution services, MDist and MDist 2. See alsoMDist and MDist 2.

N

name registryIn a Tivoli environment, a name service consisting of a two-dimensional table that maps resource names toresource identifiers and corresponding information within a Tivoli management region.

nested software packageIn Tivoli Software Distribution, Version 4, a software package that is added as an entry to another file package.

NetViewSee Tivoli NetView and Tivoli NetView for OS/390®.

NetWare managed siteIn a Tivoli environment, a resource that represents (a) a Novell NetWare server on which the Tivoli NetWarerepeater is installed and (b) one or more clients. A NetWare managed site enables profiles to be distributedthrough the NetWare server to one or more specified client PCs using either TCP/IP or IPX.

managed node • NetWare managed site

74 Version 4.1

noticeIn a Tivoli environment, a message generated by a systems management operation that contains informationabout an event or the status of an application. Notices are stored in notice groups.

notice groupIn a Tivoli environment, an application- or operation-specific container that stores and displays notices pertainingto specific Tivoli functions. The Tivoli bulletin board is comprised of notice groups. A Tivoli administrator cansubscribe to one or more notice groups; the administrator’s bulletin board contains only the notices that reside ina notice group to which the administrator is subscribed.

notification(1) An unscheduled, spontaneously generated report of an event that has occurred. (2) In systems management,information emitted by a managed object relating to an event that has occurred within the managed object, suchas a threshold violation or a change in configuration status.

O

objectIn a Tivoli environment, an item that a user can manipulate as a single unit to perform a task. An object canappear as text, an icon, or both.

object pathIn a Tivoli environment, an absolute or relative path to a Tivoli object, similar to paths in file systems.

operationIn object-oriented design or programming, a service that can be requested at the boundary of an object.Operations include modifying an object or disclosing information about an object.

oservThe name of the object request broker used by the Tivoli environment. oserv runs on the Tivoli managementregion server and each Tivoli management region client.

P

Plus moduleSee Tivoli Plus module.

policyIn a Tivoli environment, a set of rules that are applied to managed resources. A specific rule in a policy isreferred to as a “policy method.”

policy regionIn a Tivoli environment, a group of managed resources that share one or more common policies. Tivoliadministrators use policy regions to model the management and organizational structure of a network computingenvironment. The administrators can group similar resources, define access to and control the resources, andassociate rules for governing the resources. The policy region contains resource types and the list of resources tobe managed. A policy region is represented on the Tivoli desktop by an icon that resembles a capitol building(dome icon). When a Tivoli management region (region) is created, a policy region with the same name is alsocreated. In this case, the region has only one policy region. However, in most cases, a Tivoli administratorcreates other policy regions and subregions to represent the organization of the region. A region addresses thephysical connectivity of resources whereas a policy region addresses the logical organization of resources.

policy subregionIn a Tivoli environment, a policy region created or residing in another policy region. When a policy subregion iscreated, it initially uses the resource and policy properties of the parent policy region. The Tivoli administratorcan later change or customize these properties to reflect the specific needs and differences of the subregion.

populateIn a Tivoli environment, to fill a profile with information that is to be distributed to the subscribing managedresources.

notice • populate


Glo

ssary

preparation phaseIn Tivoli Software Distribution, Version 4, the phase of transactional mode operation in which each action in asoftware package prepares the conditions for the successful execution of an install or remove operation. If thepreparation phase fails, the target system is returned to its original, stable state. See also transactional mode.

profileIn a Tivoli environment, a container for application-specific information about a particular type of resource. ATivoli application specifies the template for its profiles; the template includes information about the resources thatcan be managed by that Tivoli application.A profile is created in the context of a profile manager; the profile manager links a profile to the Tivoli resource(for example, a managed node) that uses the information contained in the profile. A profile does not have anydirect subscribers.

profile managerIn a Tivoli environment, a container for profiles that links the profiles to a set of resources, called “subscribers”.Tivoli administrators use profile managers to organize and distribute profiles. A profile manager is created in thecontext of a policy region and is a managed resource in a policy region. A profile manager can operate in one ofthe following two modes: Dataless mode, which enables a profile manager to distribute to any Tivoli client(including managed nodes, endpoints, PC managed nodes, and NetWare managed sites) but not to other profilemanagers. Database mode, which enables a profile manager to distribute to any profile manager (dataless ordatabase), all managed nodes, all PC managed nodes, and NetWare managed sites, but not to endpoints.

proxy endpointIn Tivoli Distributed Monitoring, a representation of an entity (such as a network device or a host) that functionsas a subscriber for Tivoli Distributed Monitoring profiles. A Tivoli administrator associates each proxy endpointwith a managed node; several proxy endpoints can be associated with a single managed node.

proxy managed nodeIn a Tivoli environment, a managed resource that provides communication between the Tivoli management regionserver and a PC that is running the PC agent.

Q

query facilityIn a Tivoli environment, a facility that provides SQL functions for accessing information in a RIM repository.

query libraryIn a Tivoli environment, a facility that provides a way to create and manage Tivoli queries.

R

RDBMS Interface Module (RIM)In the Tivoli Management Framework, the module in the distributed object database that contains informationabout the installation of the relational database management system (RDBMS).

reference modelIn the context of Tivoli software, the model configuration for a system or set of systems that is used to maintainconsistent configurations in a distributed environment. In Tivoli Inventory, reference models are created in theconfiguration repository.

registered nameIn a Tivoli environment, the name by which a particular resource is registered with the name registry when it iscreated.

remote distributionIn a Tivoli environment, a distribution to target machines in a connected Tivoli management region.

repeater rangeIn a Tivoli environment, the Tivoli clients that receive data from the repeater site.

preparation phase • repeater range

76 Version 4.1

repeater siteIn a Tivoli management region, a managed node that is configured with the MDist feature. A repeater sitereceives a single copy of data and distributes it to the next tier of clients.

resourceIn a Tivoli environment, an entity, such as a device, a database, or a software package. Contrast with managedresource.

resource roleIn a Tivoli environment, the role an administrator has over specific resources in the local Tivoli managementregion (region) and any connected region (for example, policy regions or the Administrator collection).

resource typeIn a Tivoli environment, one of the properties of a managed resource. Resource types are defined in the defaultpolicy for a policy region.

RIMSee RDBMS Interface Module.

RIM hostIn a Tivoli environment, the managed node from which a Tivoli administrator runs the database client softwareand from which the relational database management system (RDBMS) server is contacted.

RIM repositoryIn a Tivoli environment, a relational database that contains information that is collected or generated by Tivoliapplications. Examples of a RIM repository include the configuration repository and the event repository.

root directoryThe highest level directory in a hierarchical file system.

S

send operationIn Tivoli Software Distribution, Version 4.1, a data moving operation that copies a data file from a source host tospecified endpoints.

senior roleSee authorization role.

serverA functional unit that provides services to one or more clients over a network. Examples include a file server, aprint server, and a mail server.

signatureIn Tivoli Software Distribution, Version 4, unique identifying information that forms the first line in a softwarepackage definition file. Tivoli Software Distribution uses the signature for version checking and for determiningwhat kind of importer to use to read the software package definition file.

SISSee Software Installation Service.

Software Installation Service (SIS)A Tivoli product that provides an easy-to-use, efficient interface for installing Tivoli Enterprise software. SIS usesTivoli’s MDist technology and provides automated checking for prerequisite software, a reusable repository ofinstallation images, and both graphical and command line interfaces for deploying Tivoli products to a largenumber of computers.

software packageIn Tivoli Software Distribution, Version 4, a database object that contains a sequential list of actions to beexecuted on a target system.

repeater site • software package


Glo

ssary

software package blockIn Tivoli Software Distribution, Version 4, a file that contains the resources referred to by the actions in asoftware package.

software package definitionIn Tivoli Software Distribution, Version 4, an ASCII text file used to describe package contents. It consists of asequence of stanzas that describe commands to be executed. See also stanza.

Software Package EditorIn Tivoli Software Distribution, Version 4, a Java™-based tool, with a graphical user interface, for creating andcustomizing software packages.

software package objectIn Tivoli Software Distribution, Version 4, a software package that has been imported into the Tivoli managementenvironment. The software package is cataloged at the Tivoli Software Distribution server as a Tivoli databasesoftware package object. A Tivoli administrator can perform change management operations (such as install,remove, undo, accept, commit, and verify) on software package objects.

source hostIn Tivoli Software Distribution, the managed node on which the source files and directories referred to in asoftware package reside.

stanzaIn Tivoli Software Distribution, Version 4, a section of a software package definition. A stanza may define, forexample, an action to be performed; a list of targets on which the action is to be performed; or a set ofconditions under which an action is to be executed. Stanzas may be nested, and there is a single stanza (the rootstanza) that contains the entire software package definition.

subscriberIn a Tivoli environment, a managed node, a profile manager, an endpoint, or another Tivoli client that issubscribed to a profile manager. Although profiles are distributed to a subscriber, the subscriber may or may notbe the final destination of the profile distribution.

subscriptionIn a Tivoli environment, the process of identifying the subscribers to which profiles will be distributed.

subscription listIn a Tivoli environment, a list that identifies the subscribers to a profile manager. Including a profile manager ona subscription list (in effect, a list within a list) is a way of subscribing several resources simultaneously ratherthan adding each one individually. In Tivoli Plus modules, a profile manager functions as a subscription list.

super roleSee authorization role.

T

targetIn Tivoli Software Distribution, Version 4, a workstation on which the actions defined in a software package areexecuted. The Tivoli Management Agent must be installed on the workstation. See also software package.

task libraryIn a Tivoli environment, a container in which a Tivoli administrator can create and store tasks and jobs.

Tivoli administratorIn a Tivoli environment, a system administrator who has been authorized to perform systems management tasksand manage policy regions in one or more networks. Each Tivoli administrator is represented by an icon on theTivoli desktop.

Tivoli clientA client of a Tivoli server. See Tivoli management region client and Tivoli management region server.

software package block • Tivoli client

78 Version 4.1

Tivoli Distributed MonitoringA Tivoli product that monitors system resources, initiates any necessary corrective actions, and informs systemadministrators of potential problems. Tivoli Distributed Monitoring consists of a group of monitors that areinstalled on each managed node that is to be monitored. It resolves some events on its own and may send othersto the Tivoli Enterprise Console product.

Tivoli Enterprise ConsoleA Tivoli product that collects, processes, and automatically initiates corrective actions for system, application,network, and database events; it is the central control point for events from all sources. The Tivoli EnterpriseConsole product provides a centralized, global view of the network computing environment; it uses distributedevent monitors to collect information, a central event server to process information, and distributed eventconsoles to present information to system administrators.

Tivoli Enterprise softwareThe integrated suite of Tivoli products for systems management in a large organization. These products enablesystem administrators to manage their network computing enterprise according to the disciplines of availabilitymanagement, deployment management, operations and administration, security management, and service-levelmanagement. This suite includes Tivoli Business System Manager, Tivoli NetView for OS/390, and TivoliDecision Support.

Tivoli environmentThe Tivoli applications, based upon the Tivoli Management Framework, that are installed at a specific customerlocation and that address network computing management issues across many platforms. In a Tivoli environment,a system administrator can distribute software, manage user configurations, change access privileges, automateoperations, monitor resources, and schedule jobs.

Tivoli Event Integration FacilityA Tivoli toolkit that provides a simple application programming interface (API) to enable customers and TivoliPartners to develop new event adapters that can forward events to the Tivoli Enterprise Console product.

Tivoli install imageIn a Tivoli environment, a file that resides on a CD or in a file system and contains a Tivoli product to beinstalled. A Tivoli install image can be used to install the Tivoli Management Framework or to install anapplication onto the Framework for the first time. A single CD often includes both a Tivoli install image and aTivoli upgrade image, and it may include Tivoli install images for more than one application. Contrast withTivoli upgrade image.

Tivoli InventoryA Tivoli product that enables system administrators to gather hardware and software information for a networkcomputing environment. It scans the managed resources and stores inventory information in the configurationrepository.

Tivoli IT DirectorA Tivoli product for systems management in a small or medium organization. It is not sold directly by TivoliSystems Inc. but rather through a Tivoli authorized reseller.

Tivoli management agentIn a Tivoli environment, an agent that securely performs administrative operations.

Tivoli Management FrameworkThe Tivoli base software that is required to run the applications in the Tivoli product suite. This softwareinfrastructure enables the integration of systems management applications from Tivoli Systems Inc. and the TivoliPartners. The Tivoli Management Framework includes the following: object request broker (oserv), distributedobject database, basic administration functions, basic application services, and basic desktop services (such as thegraphical user interface). In a Tivoli environment, the Tivoli Management Framework is installed on every clientand server; however, the Tivoli management region server is the only server that holds the full object database.

Tivoli management gatewayIn a Tivoli environment, a system that enables bidirectional communication with Tivoli management agents.

Tivoli Distributed Monitoring • Tivoli management gateway


Glo

ssary

Tivoli management region (region)In a Tivoli environment, a Tivoli server and the set of clients that it serves. An organization can have more thanone region. A region addresses the physical connectivity of resources whereas a policy region addresses thelogical organization of resources.

Tivoli management region clientIn a Tivoli environment, any computer—except the Tivoli management region server (Tivoli server)—on whichthe Tivoli Management Framework is installed. The oserv daemon runs on the Tivoli management region(region) client, and the region client maintains a local object database. See Tivoli client and Tivoli server.

Tivoli management region roleIn a Tivoli environment, the role an administrator has in the local Tivoli management region (region) and anyconnected region. The region role propagates the assigned authorization level to all resources in the region. Forexample, if a Tivoli administrator has a senior role in a region, then the administrator has the senior role overevery resource in that region.

Tivoli management region server (Tivoli server)A Tivoli server for a specific Tivoli management region (region). See Tivoli client and Tivoli management regionclient.

Tivoli management softwareThe overall descriptor for software from Tivoli Systems Inc., which includes Tivoli Enterprise software (forsystems management in a large organization), Tivoli IT Director (for systems management in a small or mediumorganization), and Tivoli Cross-Site™ (for the management of e-commerce systems). Tivoli management softwareenables organizations to centrally manage their computing resources (including the critical applications that drivebusiness performance and profits) in a simple and straightforward manner.

Tivoli Name RegistryIn a Tivoli environment, the table that maps names of managed resources to resource identifiers (andcorresponding information) within a Tivoli management region.

Tivoli NetViewA Tivoli product that enables distributed network management across multiple operating systems and protocols.Unlike Tivoli NetView for OS/390, Tivoli NetView does not provide centralized management from an OS/390host.

Tivoli NetView for OS/390A Tivoli product that enables centralized systems and network management from an OS/390 environment.Through its MultiSystem Manager component, Tivoli NetView for OS/390 enables management of distributedresources, such as Internet Protocol (IP) resources, NetWare resources, asynchronous transfer mode (ATM)resources, and others. Contrast with Tivoli NetView.

Tivoli NetWare repeaterIn a Tivoli environment, a server application that is installed on a Novell NetWare server and that maintains a listof available clients for the server. The Tivoli NetWare repeater works with the NetWare managed site to performprofile distribution.

Tivoli Plus moduleIn a Tivoli environment, a management module that has been certified by the Tivoli Partner Association and thatenables a specific vendor application to be managed by Tivoli management software.

Tivoli Remote ControlA Tivoli product that enables a Tivoli administrator to control mouse and keyboard operations on a Windows NTmanaged node, an endpoint, or a PC managed node. It also provides file transfer, chat, and reboot functions.

Tivoli SecureWay Security Manager (security manager)The Tivoli product that enables the consistent definition, implementation, and enforcement of security policy in anetwork computing environment.

Tivoli Security ManagementSee Tivoli SecureWay Security Manager.

Tivoli management region (region) • Tivoli Security Management

80 Version 4.1

Tivoli serverThe server that holds or references the complete set of Tivoli software, including the full object database. SeeTivoli client, Tivoli management region client, and Tivoli management region server.

Tivoli Software Distribution Web InterfaceIn Tivoli Software Distribution, Version 4, an interface that enables an end user at a Tivoli endpoint to retrieveTivoli Software Distribution profiles using the Tivoli Web-based interface.

Tivoli upgrade imageIn a Tivoli environment, an image that resides on a CD or in a file system and that contains updates for a Tivoliproduct. A Tivoli upgrade image contains only the files that have changed since the previous product release,along with the scripts and commands that are needed for installing the new files and configuring the database.Contrast with Tivoli install image.

Tivoli UserLinkA Tivoli product that provides IP address synchronization between a PC agent and its associated PC managednode using the Dynamic Host Configuration Protocol (DHCP). Tivoli UserLink also enables a PC user to pull afile package to a Windows, Windows 95, or Windows NT workstation.

Tivoli User AdministrationA Tivoli product that provides a graphical user interface (GUI) for centralized management of user and groupaccounts. It offers efficient, automated management of user and system configuration parameters, securedelegation of administrative tasks, and centralized control of all user and group accounts in a network computingenvironment.

transactional modeIn Tivoli Software Distribution, Version 4, a mode of executing install or remove operations in two phases: thepreparation phase and the commit phase. See also preparation phase and commit phase.

U

undo operationIn Tivoli Software Distribution, Version 4, a change management operation that returns a target system to its statebefore execution of a previous install or remove operation.

undoable-in-transactional modeIn Tivoli Software Distribution, Version 4, a variation of transactional mode in which disk space for backupcopies (required for undoability) is reserved during the preparation phase, which minimizes the risk of failureattributable to insufficient disk space during the commit phase.

undoable modeIn Tivoli Software Distribution, Version 4, a mode of operation in which actions can be rolled back even if theyare already committed, because a backup copy is saved.

upgrade imageSee Tivoli upgrade image.

user login mapIn a Tivoli environment, a mapping that associates a single user login name with a user account on a specifiedoperating system. User login maps enable Tivoli administrators to log in to the Tivoli environment or performoperations within a Tivoli environment with a single user login name, regardless of the system that they arecurrently using.

user profileIn Tivoli User Administration, a profile that is used to manage user accounts, including account information,home directories, startup files, and group membership.

user roleSee authorization role.

Tivoli server • user role


Glo

ssary

V

validation policyIn a Tivoli environment, policy that ensures that all resources in a policy region comply with the region’sestablished policy. Validation policy prevents Tivoli administrators from creating or modifying resources that donot conform to the policy of the policy region in which the resources were created.

verify operationIn Tivoli Software Distribution, Version 4, a change management operation that verifies the successful executionof the previous operation.

validation policy • verify operation

82 Version 4.1

GC32-0730-00