Titan & Multi Props

shorehire.com.au 1300 SHORE HIRE SYDNEY NEWCASTLE MELBOURNE BRISBANE

Titan & Multi Props

Our Titan Props can hold eight times the load for the same weight of its steel counterpart.

Due to its lightweight material it is capable of supporting eight times the load for the same weight of its steel counterpart. This extruded aluminium Prop is easily handled in awkward locations and ideally suited for tight and difficult access applications. They have a phenomenal 10 tonne working load limit and are made of high grade light alloy for easy handling.

Titan Props

Product Brochure —— Titan Props2 shorehire.com.au

Titan Props

TITAN PROPS (ALUMINIUM) WORKING LOAD LIMIT

Titan PropsDescription Size

No.2 No.4 No.6

Range 1.7 - 2.9m 2.9 - 4.1m 4.3 - 5.5m

Weight 17kg 21kg 28kg

Metres (kN)

1.70 100.0

1.90 100.0

2.10 100.0

2.30 100.0

2.50 88.0

2.70 57.0 (kN)

2.90 42.0 94.9

3.10 79.9

3.30 70.0

3.50 62.4

3.70 55.0

3.90 50.0

4.10 41.0 (kN)

4.30 42.0

4.50 39.0

4.70 37.1

4.90 33.0

5.10 31.0

5.30 28.0

5.50 27.0


1700

– 2

900

2900

– 4

100

4300

– 5

500

2810

4210

1610

Titan Props

Joint InformationMinimum 8 x M12 x 35mm 8.8 grade bolts

with 16 x 13mm washers

170

110

110

150

17

17

124

150

124

13.5

13.2

235

200

127

13.5

143

80

76ø

ø13.

5

ø13

ø51

Headplate Detail

170

110

110

150

17

17

124

150

124

13.5

13.2

235

200

127

13.5

143

80

76ø

ø13.

5

ø13

ø51

Section Detail

170

110

110

150

17

17

124

150

124

13.5

13.2

235

200

127

13.5

143

80

76ø

ø13.

5

ø13

ø51

Baseplate Detail

Titan No. 2 Titan No. 4 Titan No. 6

PROP COMBINATIONS and ADJUSTING RANGE

Height (mm)

Titan Prop

No. 2 No. 4 No. 6 kN

4600 – 5600 1 1 39-22

5800 – 6800 2 21-16

6000 – 7000 1 1 20-15

7200 – 8200 1 1 14-11

8600 – 9600 2 10-9

Note: Jack extension both sides 500mm max

The most versatile aluminium prop available, can be used in combination for longer lengths.


Titan Props – Accessories

Titan U Head Titan Coupler

S/400 Connector

TITAN FRAME SPECIFICATIONS

Height Closed Open Increment Extension

504mm 900mm 2400mm 300m

Titan Frame

Rocking Head


Light props with high load-bearing capacity.

Multi Props are made of aluminium, making them very light. For example, the MP 350 can be extended from 1.95m to 3.50m and weighs only 18.8kg. The patented profile along with the actual construction of the Multi Prop allows a considerably longer service life than is possible with steel tubing. Multi Props have a high load-bearing capacity, integrated measuring tape and self-cleaning thread.

GT Beams — End View

163 296

311 296

80

240

6060

28

120

240

NOMINAL LENGTH (mm) ACTUAL LENGTH (mm) WEIGHT (kg)

900 918 5.31200 1214 7.11500 1510 8.91800 1806 10.62100 2102 12.42400 2398 14.22700 2694 15.93000 2990 17.73300 3286 19.53600 3592 21.23900 3878 234200 4174 24.84500 4470 26.64800 4766 28.35100 5062 30.15400 5358 31.95700 5654 33.66000 5950 35.4

5.9kg/mOVERLENGTH UP TO L=17.8m

Condell Park

www.shorehire.com.auWeb:

NSW 2200

Shore Hire Pty. Ltd.

02 8708122202 8708 1200

[email protected]:

Tel:Fax:

PO Box CP449354 Edgar Street

TECH DATA REF:

TECHNICAL DATA

PRODUCT:REFERENCE: TDP06-PAGE 1

GT24 BEAMPROPPING

APPLICATIONThe GT 24 Is classified according to Prefabricated Timber Formwork Beams EN 13377:2002 (D) in girder class L 24.

It is used as formwork girders and also in propping beam applications, catchment decks etc.

The GT 24 is used for constructing wall formwork elements. It serves to support the form lining which has direct contact to the fresh concrete during concreting.It transfers the loads from the fresh concrete pressure to the steel walers which support it on the side opposite the form lining. The GT 24 and steel waler areconnected by means of hook straps.

The GT 24 is used as a main beam with support provided by a crosshead or claw head, or directly through the head plate of a slab prop. It is also used as asecondary beam for transferring slab loads into the main beam. In both cases the GT 24 must project 163 mm over the axis of the beam to be supported.

In addition, the GT 24 is also used for stop ends at slab edges as well as for special forms.

DIMENSIONS AND WEIGHT

SIDE VIEW END VIEW

GT BEAM

Nominal Length Actual Length Weight

900mm 918mm 5.3kg

1200mm 1214mm 7.1kg

1500mm 1510mm 8.9kg

1800mm 1806mm 10.6kg

2100mm 2102mm 12.4kg

2400mm 2398mm 14.2kg

2700mm 2694mm 15.9kg

3000mm 2990mm 17.7kg

3300mm 3286mm 19.5kg

3600mm 3592mm 21.2kg

3900mm 3878mm 23kg

4200mm 4174mm 24.8kg

4500mm 4470mm 26.6kg

4800mm 4766mm 28.3kg

5100mm 5062mm 30.1kg

5400mm 5358mm 31.9kg

5700mm 5654mm 33.6kg

6000mm 5950mm 35.4kg

Weight Per Metre Length 5.9kg/m

GT Beams — Side View

163 296

311 296

80

240

6060

28

120

240

NOMINAL LENGTH (mm) ACTUAL LENGTH (mm) WEIGHT (kg)

900 918 5.31200 1214 7.11500 1510 8.91800 1806 10.62100 2102 12.42400 2398 14.22700 2694 15.93000 2990 17.73300 3286 19.53600 3592 21.23900 3878 234200 4174 24.84500 4470 26.64800 4766 28.35100 5062 30.15400 5358 31.95700 5654 33.66000 5950 35.4

5.9kg/mOVERLENGTH UP TO L=17.8m

Condell Park


NSW 2200


02 8708122202 8708 1200

[email protected]:

Tel:Fax:


TECH DATA REF:

TECHNICAL DATA


GT24 BEAMPROPPING

APPLICATIONThe GT 24 Is classified according to Prefabricated Timber Formwork Beams EN 13377:2002 (D) in girder class L 24.

It is used as formwork girders and also in propping beam applications, catchment decks etc.

The GT 24 is used for constructing wall formwork elements. It serves to support the form lining which has direct contact to the fresh concrete during concreting.It transfers the loads from the fresh concrete pressure to the steel walers which support it on the side opposite the form lining. The GT 24 and steel waler areconnected by means of hook straps.

The GT 24 is used as a main beam with support provided by a crosshead or claw head, or directly through the head plate of a slab prop. It is also used as asecondary beam for transferring slab loads into the main beam. In both cases the GT 24 must project 163 mm over the axis of the beam to be supported.

In addition, the GT 24 is also used for stop ends at slab edges as well as for special forms.

DIMENSIONS AND WEIGHT

SIDE VIEW END VIEW

Multi Props

GT Beams

GT 24 BEAMTITAN TOU-HEAD CLAMP

CONCRETE SLAB

PLYWOODGT 24 BEAM

TITAN TOU-HEAD CLAMP

TIMBER JOIST

WALL

TIMBERSLEEPER

TIMBERSLEEPER

Condell Park


NSW 2200


02 8708122202 8708 1200

[email protected]:

Tel:Fax:


TECH DATA REF:

TECHNICAL DATA


GT24 BEAMPROPPING

Handling Damaged GirdersDue to its low weight, the GT 24 is basically moved, assembled and dismantled by hand. No damage occurs through the use of machinery. Damage could occur ifthe GT 24 falls to the ground from a great height or is shortened by means of a saw. The GT 24 is to be inspected before every use for signs of damage and, ifnecessary, taken out of service.

Storage

The GT 24 is stored in a horizontal position: chord on chord or chord on web. The entire surface is to be supported in order to avoid any distortionoccurring.

CATCHMENT DECK FLOOR JOIST SUPPORT

Typical Site ApplicationsThe GT24 beam can be applied for many uses in construction. The more common uses include being used to form catchment decks and also tosupport timber joists. Examples of these uses are conveyed below:

Due to it's light weight, the GT24 beam is generally used in conjunction with Shore Hire's range of light weight aluminium titan props and applicable accessoriesincluding the titan U-Head and titan frame. However, the beams are adaptable and flexible and can be utilised with a broad range of other propping gear andassociated accessories.


Multi Props

MULTI PROP WORKING LOAD LIMIT

Extend.Length (m)

MP 250Length = 1.45 – 2.50m

MP 350Length = 1.95 – 3.50m

MP 480Length = 2.60 – 4.80m

MP 625Length = 4.30 – 6.25m

Outer Tube at Bottom

Inner Tube at Bottom







(kN) (kN)1.45 73.3 76.21.50 73.3 76.21.60 73.3 76.21.70 73.3 76.21.80 71.7 76.21.90 68.6 76.2 (kN) (kN)1.95 67.0 76.2 88.3 87.42.00 65.4 76.2 88.3 87.42.10 63.8 74.6 83.0 87.42.20 62.2 73.0 77.7 87.42.30 61.1 70.5 72.9 86.62.40 60.6 67.0 68.6 85.12.50 60.0 63.6 64.4 83.5 (kN) (kN)2.60 61.9 80.7 85.9 71.42.70 59.3 77.8 81.2 71.12.80 57.5 74.9 76.5 70.82.90 55.7 71.9 71.8 70.43.00 54.3 68.3 67.1 70.13.10 52.9 64.6 63.0 69.43.20 51.4 60.0 58.9 68.63.30 49.8 55.4 54.8 67.93.40 46.4 50.3 52.5 66.23.50 42.9 45.1 50.2 64.53.60 47.9 62.83.70 46.0 58.63.80 44.2 54.43.90 42.3 50.24.00 40.4 46.94.10 38.5 43.74.20 36.6 40.4 (kN) (kN)4.30 34.8 38.2 56.2 44.64.40 32.9 36.0 54.7 44.64.50 31.1 33.7 53.1 44.64.60 29.3 31.5 50.9 43.84.70 27.4 29.3 48.8 43.04.80 25.6 27.1 46.4 42.14.90 43.8 41.25.00 41.2 40.35.10 38.6 38.85.20 36.1 37.35.30 33.6 35.9

5.40 31.9 34.55.50 29.9 33.15.60 28.4 31.65.70 26.9 30.15.80 25.5 28.65.90 24.3 27.06.00 23.1 25.46.10 22.0 24.16.20 20.9 22.86.25 20.4 22.1


SYDNEY BRANCH360 Edgar StreetCondell Park NSW 2200 [email protected]: 02 8708 1200

NEWCASTLE BRANCH18 Yilen CloseBeresfield NSW 2322 [email protected]: 02 4918 2500

MELBOURNE BRANCH1 Oban CourtLaverton North VIC 3026 [email protected]: 03 9344 6400

BRISBANE BRANCH11 Angel RoadStapylton QLD 4207 [email protected]: 07 3080 4000

HEAD OFFICEPO Box CP449 Condell Park NSW 2200354 Edgar StreetCondell Park NSW 2200 [email protected]: 02 8708 1250

1300 SHORE HIREshorehire.com.au

Documents

Titan & Multi Props