Tips&Cautions · 2016-12-23 · S485EU-02 07/2007 1621 Sakazu, Kurashiki, Okayama 710-0801, Japan Flow Chart Sheet See Instructions for Use Tips&Cautions •Mixed PANAVIA F 2.0 paste

S485EU-02 07/2007

1621 Sakazu, Kurashiki,Okayama 710-0801, Japan

Flow Chart SheetSee Instructionsfor Use

Tips&Cautions

•Mixed PANAVIA F 2.0 paste will not set up on the pad.

•Do not use hemostatic agent containing ferric sulfate.

•PANAVIA F 2.0 Opaque shade can not be light cured ; chemical cures.

•PANAVIA F 2.0 can be cured using any type of curing light(Halogen, LED and Plasma arc light).

•For easy clean up, excess cement around the margin may belight cured partialy for 2 to 3 sec, (Using conventional halogen or LEDlight) then remove excess.

•Step by step illustrations for silanating porcelain (Please refer to the back).

DUAL CURE DENTAL ADHESIVE SYSTEMTM

QX_S485EU-01-Aaa 07.7.5 3:44 PM ページ 1

OR

SE BOND PRIMER

PORCELAIN BONDACTIVATOR

LINER BOND 2VPRIMER

PORCELAIN BONDACTIVATOR

rApply mixture to restoration.qSandblast the internal surface.

tAir dry.wApply K ETCHANT GEL to cleanthe internal surface for 5 sec.Wash and dry.

eDispense one drop each of PRIMER andACTIVATOR on the mixing dish and mix.

Silane coupling treatment procedure

Mix paste A&B for 20 sec.

reference line

mark

1 2

5 6

Sandblast, wash & dry.

Gently air dry. Dispense equal amounts of pasteA&B.

Apply ALLOY PRIMER to internalsurface of precious metalrestoration.

Mix equal amounts of ED PRIMER @A&B. Apply to the tooth. Then, wait30 sec.*ED PRIMER@initiates set of cement.

3

4 H2O

1

Cem

enta

tion

ofpr

ecio

us&

sem

i-pre

ciou

sm

etal

crow

ns,P

FMcr

owns

,bri

dges

,inl

ays

and

onla

ys.

Cementation of precious & semi-precious metal crowns, PFM crowns, bridges, inlays and onlays.


30 s

Apply mixture of the paste.

Self cure material by applyingOXYGUARD @ to the margins. Then,wait 3 min.

Light cure the margins. 20sec. per surface

(Conventional halogen or LED light) 5sec. per surface

(Plasma arc or fast halogen light)

Cementation of precious & semi-precious metal crowns, PFM crowns, bridges, inlays and onlays.


Cem

entationofprecious

&sem

i-preciousm

etalcrowns,P

FMcrow

ns,bridges,inlaysand

onlays.

19-a

9-b

OR

7 8

Remove excess cement. (For easy clean up, partialylight-cure the excess cementfor 2-3 sec. with conventionalhalogen or LED light, thenremove the excess.)

3 min

Conventional halogen, LED

Plasma arc, fast halogen

20 s

5 s

reference line

mark

Mix equal amounts of ED PRIMER @A&B. Apply to the tooth. Then, wait30 sec.*ED PRIMER@initiates set of cement

Gently air dry. Dispense equal amounts of pasteA&B. Mix paste A&B for 20 sec.minimum.

Sandblasting. Apply K ETCHANT GEL (40% phosphoricacid ) to clean surface for 5 sec.Rinse and dry.

Mix equal amounts of CLEARFIL SEBOND or LINER BOND 2V Primerswith PORCELAIN BOND ACTIVATOR(Silane). Apply mixture and air dry.

1 2 3

4 5 6

Cem

enta

tio

no

fsi

lan

ated

po

rcel

ain

/co

mp

osi

tere

sto

rati

on

s

2Cementation of silanated porcelain/composite restorations


5 s

H2O

Air

30 s H2O

Apply the mixture of the paste.

Cem

entatio

no

fsilan

atedp

orcelain

/com

po

siteresto

ration

s

29-a

9-b

OR

7 8

Remove excess cement. (For easy clean up, partialylight-cure the excess cementfor 2-3 sec. with conventionalhalogen or LED light, thenremove the excess.)





Cementation of silanated porcelain/composite restorations




20 s

5 s

3 min

reference line

mark

Mix equal amounts of ED PRIMER @A&B and apply to the tooth. Then,wait 30 sec.*ED PRIMER@initiates set of cement.

Mix paste A&B for 20 sec. Apply the mixture of the paste tothe sandblasted crown.

Gently air dry. Dispence equal amounts of pasteA&B.

1 2

4 5

H2O

Cementation of ceramic oxide restorations: PROCERA™, IN-CERAM™, CERCON™ and other zirconia prostheses.


Cem

enta

tio

no

fce

ram

ico

xid

ere

sto

rati

on

s:P

RO

CE

RA

™,

IN-C

ER

AM

™,C

ER

CO

N™

and

oth

erzi

rco

nia

pro

sth

eses

.

3

330 s

6

Remove excess cement.(For easy clean up, partialy light-cure the excess cement for 2-3 sec.with conventional halogen or LEDlight, then remove the excess.)

7-a




7-b


Cem

entatio

no

fceram

ico

xide

restoratio

ns:

PR

OC

ER

A™

,IN

-CE

RA

M™

,CE

RC

ON

™an

do

ther

zircon

iap

rosth

eses.

3

OR

Cementation of ceramic oxide restorations: PROCERA™, IN-CERAM™, CERCON™ and other zirconia prostheses.


3 min



20 s

5 s

Apply K ETCHANT GEL (40%phosphoric acid) to the enamelsurface for 10 sec.Rinse and gently air dry.

Mix equal amounts of ED PRIMER @A&B. Apply to the tooth. Then, waitfor 30sec.*ED PRIMER@ initiates set of cement

Gentry air dry.

Hydrofluoric acid etch the veneer.If veneer is pre-etched bylaboratory go to step .

Apply K ETCHANT GEL (40%phosphoric acid) to clean theinternal surface for 5 sec.

Mix equal amounts of CLEARFIL SEBOND or LINER BOND 2V Primerswith PORCELAIN BOND ACTIVATOR(Silane). Apply mixture and air dry.

1 2 3

4 5 6 H2O

Cem

enta

tio

no

fp

orc

elai

nve

nee

rs

4

2

Cementation of porcelain veneers


10 s

H2O

Air

5 s

H2O

Air

30 s

reference line

mark

Self cure material by applyingOXYGUARD @ to the margins.Then, wait 3 min.




Apply mixture of the paste directlyto silane.

Cem

entatio

no

fp

orcelain

veneers

4

OR

10-a 10-b

Dispense equal amounts of pasteA&B. Mix for 20 sec. minimum.

Remove excess cement.(For easy clean up, partialy light-cure the excess cement for 2-3 sec.with conventional halogen or LEDlight, then remove the excess.)

7 8 9Cementation of porcelain veneers




20 s

5 s 3 min

reference line

mark

Sandblast, wash&dry.

Mix equal amounts of ED PRIMER @A&B. Apply to the tooth. Then, wait30 sec.*ED PRIMER@initiates set of cement.

Gently air dry. Dispence equal amounts of pasteA&B.

Apply ALLOY PRIMER to internalsurface of precious metal restration.

3

4 5 6

Apply K ETCHANT GEL (40%phosphoric acid) to the tooth for 10sec. Rince and dry.

H2O

Cem

enta

tio

no

fp

reci

ou

sre

sto

rati

on

s(A

dh

esio

nb

rid

ges

/Mar

ylan

db

rid

ges

)

5

1 2

Cementation of precious restorations (Adhesion bridges/Maryland bridges)


10 s

H2O

Air

30 s

Cem

entatio

no

fp

reciou

sresto

ration

s(A

dh

esion

brid

ges/M

aryland

brid

ges)

5





Apply the mixture of the paste tosandblasted metal.

OR

9-a 9-b

Mix paste A&B for 20 sec. Remove excess cement.(For easy clean up, partialy light-cure the excess cement for 2-3 sec.with conventional halogen or LEDlight, then remove the excess.)

7 8 9Cementation of precious restorations (Adhesion bridges/Maryland bridges)




20 s

5 s3 min

reference line

markH2O

Gentle air dry.Remove excess primer with paperpoints.

Dispense equal amounts of pasteA&B.

Mix paste A&B and coat posts withmixed cement.

Sandblasting. If the post is precious metal, applyALLOY PRIMER, air dry.

Mix equal amounts of ED PRIMER @A&B. Apply to coronal and post-holetooth structure. Then, wait 30 sec.*ED PRIMER@initiates set of cement.

1 2 3

4 5 6

Cem

enta

tio

no

fco

res

or

pre

fab

rica

ted

po

sts.

6Cementation of cores or prefabricated posts.


30 s

Seat posts and apply excesscement to coronal tooth structure.

Place build-up composite directlyon PANAVIA F 2.0, light or self-cure.

7 8

Cem

entatio

no

fco

reso

rp

refabricated

po

sts.

6Cementation of cores or prefabricated posts.


reference line

mark

Apply mixture of paste to the baseof the preparation.

Mix and place the amalgam. Complete the carving and removethe matrix band.

Mix equal amounts of ED PRIMER @A&B. Apply to the tooth. Then, wait30 sec.*ED PRIMER@initiates set of cement

Gently air dry. Dispense equal amounts of pasteA&B. Mix paste A&B for 20 sec.minimum.

1 2 3

4 5 6

H2O

Am

alg

amb

on

din

g

7Amalgam bonding


30 s

7 9

Remove excess cement.(For easy clean up, partialylight-cure the excess cementfor 2-3 sec. with conventionalhalogen or LED light, thenremove the excess.)

Complete the polishing.

8-a




8-b


Am

algam

bo

nd

ing

7

OR

Amalgam bonding




20 s

5 s

3 min

Documents

Tips&Cautions · 2016-12-23 · S485EU-02 07/2007 1621 Sakazu, Kurashiki, Okayama 710-0801, Japan Flow Chart Sheet See Instructions for Use Tips&Cautions •Mixed PANAVIA F 2.0 paste