Embed Size (px)
DESCRIPTION
"MRI-Mold.ca’s core business is mold inspection and removal. They use a common sense approach to mold inspections, root cause determination and mold removal. Visit http://www.mri-mold.ca/ for more information on their services. They are located at 130 King St W #1800 Toronto, ON M5X 1E3 (416) 504-0333. "
Citation preview
Tips for Preventing Mold In Your Home
Introduction
With so much information available online and elsewhere, most homeowners are probably sufficiently paranoid about the presence of mold in their home. It’s common knowledge that mold is a potential health hazard and should be avoided whenever possible. According to mri-mold.ca, a company that tackles mold remediation in Toronto, some of the possible health issues related to mold include allergies, asthma, sinus infections, rashes and even memory loss.
Introduction
If you have a mold problem, it’s always best to call a company like mri-mold.ca to check it out for you. However, if you aren’t in the danger zone yet, prevention is your best bet to stay there. Here are some valuable tips to prevent mold in your home.
Keep Your House Dry
Generally speaking, a dry house is a mold-free house. The top prevention tip you can follow is to keep your home as dry as possible. Mold requires moisture to take hold and grow, so control the moisture content and you will control the mold production.
Keep Your House Dry
It’s wise to sit back and think of all the different ways that moisture may be introduced to your home, then take measures to counteract each one. It may take some time and effort on your part, but it will be well worth it in the end.
Reduce Humidity & Condensation
According to the Environmental Protection Agency, humidity and condensation in the home are two contributors to mold growth. To help reduce the overall humidity level in the home:•Vent appliances that create moisture to the outside. These include dryers, heaters and stoves.
•Utilize air conditioners or dehumidifiers when necessary.
•Use exhaust fans in the kitchen and bathroom when cooking or showering to help lower the humidity level.
Reduce Humidity & Condensation
Condensation on the inside of windows can result in a lot of moisture around the window frames, and subsequent mold growth. To help control condensation:•Follow the steps to reduce humidity.•Open doors and windows or use fans to increase air circulation when the weather permits. •Insulate cold water pipes and other cold surfaces.
Room-by-Room Prevention
The Canada Mortgage and Housing Corporation offers room-by-room prevention tips that will help you to be even more effective at keeping mold out of your home.
Room-by-Room Prevention
The Basement
•Reduce the clutter•Use a dehumidifier in summer months•Don’t use carpets on below grade floors•Replace furnace filter regularly
•Remove standing water immediately
•Check for signs of moisture regularly
Room-by-Room Prevention
Laundry Room
•Make sure the dryer vents outside•Clean lint trap with every use•Only hang dry clothes outside•Keep laundry tub and washer dry
Room-by-Room Prevention
The Kitchen
•Be mindful of boiling pots on the stove•Use the exhaust fan when cooking if it vents outside•Clean the drip pan at back of fridge periodically•Check under the sink for moisture and leaks regularly
Room-by-Room Prevention
The Bathroom
•Ensure the bathroom fan exhausts to the outside•Run the bathroom fan when you shower•Reduce the length of your showers•Check for leaks regularly
•Clean your drains regularly with baking soda and vinegar or a plumber’s snake
Room-by-Room Prevention
The Bedroom
•Remove clutter from the room and closets•Keep the air circulating with a fan or opening a window periodically
Room-by-Room Prevention
Take the time to look over the exterior of your home every month or two, to make sure there aren’t any places water can get inside. If you notice leaks or damaged areas, make sure you deal with them promptly to continue your prevention efforts.
Room-by-Room Prevention
If you find any mold, contact a licensed mold remediation company to eradicate the problem before it gets out of hand. Remember that mold is alive and it will grow and multiply if it isn’t contained.
Advice
MRI-Mold.ca’s core business is mold inspection and removal. They use a common sense approach to mold inspections, root cause determination and mold removal.
Visit http://www.mri-mold.ca/ for more information on their services. They are located at 130 King St W #1800 Toronto, ON M5X 1E3 (416) 504-0333.
