Embed Size (px)
DESCRIPTION
TIMco, wholesale supplier of screws, fasteners, fixings, nails & power tool accessories. (Issue 11).
Citation preview
Distributed by:
Issue No: 11
UK: +44 (0)1829 261111Northern Ireland: +44 (0)2890992305
Ireland: +353 (0)4763538
www.TIMco.co.ukwww.TIMco.ie
TIMco House, Green Lane, Wardle, Nantwich, CW5 6BJFax: +44 (0)1829 261102Fax: +44 (0)1829 [email protected]
T.I. Midwood & Co Ltd
Aviemore House, Hill Street, Monaghan, IrelandFax: +353 (0)4763539 [email protected]
2014
T.I.Mid
wo
od
& C
o Ltd
ww
w.TIM
co.co.uk •
ww
w.TIM
co.ieW
HO
LESALE SU
PP
LIER O
F SCR
EWS, FA
STENER
S, FIXIN
GS, N
AILS A
ND
PO
WER
TOO
L AC
CESSO
RIES
GrosvenorPark
Grosvenor Park Terrace
The Groves
Forest St
Priory Pl
Foregate St
York StQ
ueen St
Frodsham St
Eastgate St
St John St
Bush St
A5268
Union St
A5268
A5268
St Oswalds Way
A51
A51
A5268Vica
rs Ln
Pepper St
Grosvenor Park Rd
The Headlands
Love Street
1970 1975 1980 1985 19901971 1972 1973 1974 1976 19811977 19821978 19831979 1984 1986 1987 1988 1989 1991
500,000,000ITEMS IN STOCK.
£5,500,000
RAPID GROWTH TWICE AS NICE
INSTANT CLASSIC
In 1990 Peter GIll joined the company as
General Manager, to become Managing
Director in 1993.
1989 also saw the launch of the twin threaded woodscrew, this would form the basis of many future products and remains a best seller to this day.
1995 saw turnover almost
treble in the space of � ve
years to reach a record:
Continuous investment in stock meant that by 1994 the company had over:
With growing ranges and big ambitions in 1989 the company moved to a former World War II aerodrome just outside Nantwich.
YOU WANT IT WHEN?
In 1994, keen to build on an excellent customer service record, next day delivery was o� ered on all orders received by 4.00pm the day before.
1992 saw the launch of the Classic multi-purpose screw.
In 1992 the o� ce space was extended to accommodate an additional 10 work stations.
A51
Nantwich Rd
Calveley Hall Ln
Stoke Hall Ln
Mill Pool Ln
Green Lane
A51
Nantwich Rd
£2,100,100
All the hard work of the previous year paid of, as the company saw record
turnover in 1990:
RECOGNISED QUALITYBS5750 - The � rst of many
quality accreditations.
320,000,000 ITEMS IN STOCK.
With their new location the company invested heavily with:
STEADY PROGRESS
A MODEST START
A GROWINGRANGE
T I MIDWOOD & COThe company was founded in 1972 by a young Tim Midwood, based in a small unit at No. 1 Love Street, Chester.
In 1972 after � ve years of successful trading at the Love Street site, T I Midwood relocated to larger premises, Unit B2, Stadium Industrial Road, Chester (now known as Sealand Road).
In 1980 T I Midwood expanded their range to include drywall screws.
A WINDOW OF OPPORTUNITYIn 1987 T I Midwood applied their ever growing
industry knowledge and experience to the window screw market.
Initially the company concentrated on importing a small range of nylon lock nuts and self tapping screws from the far east.
Keen to stay ahead of the times in 1973 T I Midwood invested in their � rst real technology....
A brand new Telex machine!
From the UK to Taiwan meant
taking 4 flights over 48 hours!
Finchell Dr
Jasmond Rd
Sedge�
eld R
d
Arthur St
A548
A548
Sealand Rd
Whipcord Ln
Upper Cambrian Road
Garden Ln
Orchard St
Louise St
Raymond St
Gladstone Ave
Vernon RdCatherin
e St
S View rd
Tower Rd N
Walls Ave
Kitc
hen
St
Raym
ond St
19951992 1993 1994Sales: U
K +44 (0)1829 261111 • Ireland +353 (0)4763538TIM
co
YOU
R TIMco CO
NTA
CTSN
OTES
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Here to help!
Internal Contact
Name:
Direct Line:
Email:
Notes
External Contact
Name:
Mobile:
Email:
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538TIMcoDedicated to serving our distributors and stockists.At TIMco we pride ourselves on delivering the highest standards of customer service. We want to look after you as best we can and develop a long lasting relationship.
We operate as a completely integrated team to provide you with the very best service. As a valued TIMco customer you are assigned a dedicated regional account manager who will visit you on a regular basis to discuss your business requirements. Furthermore we will assign an internal sales representative to you who will deal with your day-to-day needs.
2000 2005 20101996 1997 1998 1999 2001 2002 2003 2004 2006 20112007 2008 2009
END OF AN ERASadly in 1996 Tim Midwood died, leaving a company that had, over 24 years, built an enviable reputation within the UK fastener industry.
1,000,000,000 ITEMS IN STOCK.
NOT SO SOLO
A COLLATED COLLECTION
The launch of the Solo chipboard screw in 1997 and a range of decking screws a year later pushed stock levels to an all time high, double that of three years earlier:
2000 saw the launch of a range of collated drywall and flooring screws, specifically designed to be compatible with all leading brands of power tools. The collated strips have a well known bright yellow colour.
T I MIDWOOD & CO LTDAs the company entered a new stage in its growth T I Midwood & Co was registered as a limited company, now known as TIMco, a new identity was also launched.
2000m2
Extra warehousing was constructed in 1996 to accommodate new ranges and stock levels.
In 1996 Yvonne Messenger joined the company, on the marketing team before eventually joining the accounts team.
In 2002 Simon Midwood, son of company founder Tim Midwood, joined the company.
£5,600,000
£6,800,000
£13,750,000
A FIRMER HOLD ON THE MARKET
A TWIST IN THE STORY
£10,000,000
2,000,000,000ITEMS ONLY A CLICK AWAY
Turnover dipped marginally in 2001 after peaking at £6,000,000 in 1998.
By 2006 the previous years investments were beginning to pay off as turnover had reached a new record high and TIMco had reached a new milestone in stock levels:
The end of 2012 saw TIMco sales double during one of the longest recessions ever recorded in the UK.
In 2008 TIMco purchased FirmaHold, a leading brand in the collated nails and fuel cells market.
2010 saw the release of Velocity, a premium multi- use woodscrew, along with TIMco Shield, an innovative carpet, hard floor and window protective film and a range of Coach Screws, Carriage and Roofing bolts.
Number of employees 50.
In 2010 TIMco hit the £10 million sales milestone, five times higher than that of twenty years ago!
2010 also saw the opening of TIMco Taiwan - The company’s own dedicated factory.
Moving with the times, and with stock at an all time high, in 2008 TIMco launched their industry leading e-commerce web site. www.TIMcouk.com gives customers a powerful and efficient order management tool at their fingertips.
Many of our current customers can remember doing business with Mr Midwood from the very beginning - A testament to our reputation for building lasting relationships.
HIGHER STANDARDSISO 9001/2000 Accredited in 2000.
RAISING THE ROOFING SCREW
2003 saw the launch of a range of roofing and general construction screws, designed to meet all industry standards and performance criteria.
In 2003 TIMco were also accredited with the Investors in People award.
A DIFFERENT ANIMAL
CONCRETE FOUNDATIONS
A NEW CHAPTER
BRANCHING OUT
A NEW ANCHOR
INDUSTRY RECOGNITION
IN THE BAG
YOU ARE THE FUTURE…
In 2005 after years of research and development, that is still on going today, TIMco launched the ever growing Addax brand of specialist power tool accessories.
2004 saw the launch of a range of concrete screws, nylon hammer fixings and cavity anchors. In 2007 metal anchors were also added to this range.
In 2011 the company moved into new purpose built buildings.
A direct extension to the current warehouse, with
a further 1700m2 warehousing and
900m2 office space.
In 2013 TIMco opens an office in Monaghan, Ireland.
After two years of research and development the TIMco Multi-Fix Bolt is released.
TIMco receive the NBG supplier of the year award in 2011 and 2012
TIMco products become CE approved.
TIMco release a new breed of merchandising in the form of TIMbag
The story so far has been built around our customers, from the building of lasting relationships, listening to their needs and exceeding expectations of quality and service.
TOP BRASSReleased in 1999 the Top Brass was a patented design, specifically designed to be power tool compatible.
In 2008 TIMco achieved ISO 9001/2008.
2012 2014
500,000,000 ITEMS IN STOCK.
As a TIMco customer you can expect the following:
Active technical support through experienced QC
department.
RS 14446
ISO 9001 Registration. Plating
Cr3
TIMco website account for
online orders.
Next day delivery.
2013 2015
Extensive and deep stocks of
over 4,000 product lines.
40 years of experience in the fastener
business.
Top quality products and
packaging.
Knowledgeable, and friendly
staff.Strong brand recognition.
Marketing and training
support.Approvals
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIM
co
www.TIMco.co.uk
My Account Information & Feedback
Your new way to shop!
We have re-developed our website to offer you a more convenient way to shop, from easy to use searches and quick buy options all to help you find what you want at the click of a button. A new My Account section has been created for managing your on-line account and for easy viewing of your most recent activity.
#timco tweets www.linkedin.com/company/timco
My Dashboard allows you to see all your recent lists, orders and invoices.
Product Information & Technical Data view and download CE DOP's, Test Reports and Technical Data Sheets.
PDF and CSV Price Lists view and download your own prices.
Create multiple lists for favourites to weekly or monthly shops.
Address Book manage your delivery addresses.
New Product Page with more information, FAQs and technical downloads.
Review Products give your own opinion on TIMco products.
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco O
NLIN
E
www.linkedin.com/company/timco
Delivery time 24 hrs5pm last order time for 24hr delivery
Carriage paid value £150Minimum invoice value £25Below carriage paid £10 extraBooking In £5 extraPrivate address £5 extra
Pre 9am delivery £20 extraPre 12noon delivery £10 extraSaturday Pre 12noon £35 extra
Tail Lift £15 extra
Weather and location permitting5pm last order time for 24 & 48hr delivery
Carriage paid value* 250 300Minimum invoice value 250 300Booking In (extra) 5 6 Private address (extra) 5 6
Pre 12noon delivery (extra) 10 -
Tail Lift (extra) 15 20
*For all o�-shore islands (excluding Isle of Wight) please contact sales for carriage duty.
£ €
48 hrs24 hrsDelivery time
London
Ipswich
Liverpool
Carlisle
York
Birmingham
Manchester
EdinburghGlasgow
Fort William
Inverness
Aberdeen
Newcastle upon Tyne
Cardi�
Carmarthen
ExeterPortsmouth
Dover
Caernarfon
ISLE OF MAN
ANGLESEY
Cork
GalwayDublin
Belfast
WESTERN ISLESISLANDS
ORKNEYISLANDS
SHETLANDISLANDS
ISLES OFSCILLY
GUERNSEY
JERSEY
ISLE OFWIGHT
TIMco IrelandAviemore House
Hillside, Monaghan.County Monaghan.
Tel: +353 (0)4763538
TIMco UKGreen Lane, Wardle,Nantwich, Cheshire
CW5 6BJTel: +44 (0)1829 261111
0 50 100 km
If you place your order before 5:00pm, we will despatch your goods on the same day.
Reliable Servicew
ww
.TIMco.co.uk • w
ww
.TIMco.ie
DISTRIBU
TION
Item TIMco TIMbag
Velocity® Premium Multi-use Screws 10 -
CLASSIC2® (Yellow)
12 -
Classic® Multi-Purpose Screws(Yellow and Zinc)
14 -
Classic® Multi-Purpose Screws (Stainless Steel, Black, Yellow Pan and Hinge)
16 -
Solo™ Woodscrews 17 -
Twin-Threaded Woodscrews (Zinc and Blackjax™) 18 59
Top Brass™ Woodscrews 19 59
Carcass Screws 20 -
Mirror Screws 20 59
Surface Screw Cups - 61
Mixed Trays (Classic, Twin Threaded and Self-Tapping)
20 -
Mixed Packs (Classic, Twin Threaded and Solo) 21 -
In-Dex™ Decking Screws 22 60
In-Dex™ Timber Screws (Hex and Wafer Head) 23 60
In-Dex™ Coach Screws 24 -
In-Dex™ Carriage Bolts 24 -
Drywall Screws 25 59
Self-Drilling Drywall Screws 26 59
Yellow Strip Collated Screws 26 -
Shims & Packers 27 -
Self-Tapping Screws 28 60
Hexagon Head Self-Drilling Screws 29 -
Roofing Screw Cover Caps 29 -
Roofing Screws 30 60
Metal Framing Screws 34 -
Pan Head Self-Drilling Screws 34 -
PVCu Window Screws 35 -
Coach Screws 38 62
Roofing Bolt & Square Nuts 38 62
TIMco® Screws, Accessories & Fasteners TIMco® Fasteners, Anchors & Accessories
Item TIMco TIMbag
Cable Tray Bolt 38 -
Carriage Bolts 39 62
Threaded Rods 39 -
Timber Connectors 39 -
Sets & Bolts 40 62
Nuts 41 63
Washers 42 63
Cable Ties 43 -
Ceiling Anchors 45 -
Zamac Nail In Anchors 45 -
Wire Hangers 45 -
Express Nails 46 61
Insulation Fixings (Metal and Plastic) 46 -
Plastic Plugs 46 -
Speed Plugs (Metal and Nylon) 47 61
Metal Cavity Anchors 47 61
Spring Toggles 47 -
TIMco Multi-Fix® Screws 48 61
Nylon Frame Fixings 49 61
Nylon Frame Anchors 49 -
Nylon Hammer Fixings 49 61
TIMco Multi-Fix® Bolts 50 -
Throughbolts 52 61
Forged Hooks & Eyes 52 61
Shield Anchors (Shields, Projecting and Loose Bolt) 53 61
Drop In Anchors 54 -
TIMco Multi-Fix® Resins (PE, PESF and VESF) 55 -
Chemical Anchor Studs 56 -
Chemical Resin Accessories (Guns, Pumps, Nozzles, Brushes and Sleeves)
56 -
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
CON
TENTS
Item TIMco
HSS - M2 Ground Blacksmiths Drills
87
HSS - M2 Fully Ground Stubs Drills Din1897
88
M2 HSS Broaching Cutters 88
HSS Cone Cutters - Step Drills - Countersinks
89
HSS - M3 Bi-Metal Holesaws - Variable Pitch and Constant
90
HSS - Holesaw Arbors and Accessories
91
Diamond Core Bits, Accessories and Kit
92
Chucks, Keys and Adaptors 93
Resin Bonded Abrasives 94
Diamond Blades and Wheels 96
Jigsaw Blades 100
Sabre Blades 101
Hacksaw Blades 101
Screw Driver Bits 102
Builder's Metal Work 106
TIMco Marketing 117
Item TIMco
Professional SDS Hammer Bits - Addax Plus
74
Tradesman SDS Hammer Bits and Steels
76
SDS Max and Steels 77
Booster - 3 Cutter SDS Plus Bits 78
Professional Masonry Bits - Addax Pro
79
TCT Multi Purpose Drill Bits 79
SDS Shank Rebar Cutters 80
TCT Tile and Glass Bits 80
Diamond Tile and Glass Bits - Wet and Dry
81
HSS Brad Point Wood Bits 82
Hexagonal Shank Flat Wood Bits 82
TCT Hinge Cutters 82
Hexagonal Shank Wood Auger Bits 83
HSS - Cobalt Jobber Drills - Din338 and Drill Sets
84
HSS - M2 Fully Ground Jobber Drills - DIN338 and Drill Sets
85
HSS - Roll Forged Jobber Drills - DIN338 and Drill Sets
86
HSS - M2 Fully Ground Long Series Drills
87
Item TIMco
TIMco Loose Nails 64
Item TIMco
TIMco FirmaHold Clipped Head Nails
70
TIMco FirmaHold Brad Nails 71
Item TIMco
TIMco Shield Protective Films 67
Item TIMco
TIMco FirmaHold Fuel Cells 72
Polymer Headed Pins & Nails 72
TIMco® Loose Nails TIMco® Shield Protective Films
FirmaHold® Products
Addax® Products
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieCO
NTEN
TS
The gauge of the screw is determined by the size of the outside thread diameter.
HEXAGON HEAD WITH WASHER
As above with EPDM washer to prevent water ingress.
HEXAGON HEAD WASHER FACE
Positive drive Hex Head with an integral washer to increase clamping effectiveness.
WAFER HEAD OR FLANGE HEAD
Low profile head with a flat underside for applications where a large clamping area and an unobtrusive head is required.
PAN / ROUND HEAD
Head with a flat underside. Designed for application fixing against metal surfaces.
RAISED HEAD COUNTERSUNK
A countersunk head with a slight raised dome for an attractive finish. Ideal for use in hinges.
BUGLE HEAD
A curved surface under the head to prevent damage or tearing to the plasterboard paper.
COUNTERSUNK HEAD
Designed for countersinking into timber for a flush or recessed finish.
COUNTERSUNK RIBBED HEAD
Small ribs on the countersink to assist completion of countersinking.
DOUBLE COUNTERSUNK
Improved design on the countersunk head to give additional head strength and assist countersinking.
Fasteners with the following head types are measured from the underside of the head to the point of the screw:
Below shows how to work out the thread length.
Measurement to the point of the screw
Measurement to the point of the screw
Fasteners with the following head types are measured from the top of the head to the point of the screw:
Gauge
Measuring Length
Thread Length
Head Types
Gauge Metric 0 (mm) Imperial 0 (inch)
0g 1.5 1/161g 1.9 5/642g 2.25 3/323g 2.5 13/1284g 2.58 7/645g 3.3 1/86g 3.5 9/647g 3.9 5/328g 4.2 11/649g 4.5 23/128
10g 4.8 3/1612g 5.5 7/3213g 6.1 15/6414g 6.3 1/415g 6.5 1/416g 6.8 17/6418g 7.5 19/6420g 8.1 21/6424g 9.4 3/8
Length of thread
Length of thread
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
8
SCREW SIZE &
INFO
RMATIO
N
NEEDLE / GIMLET AND SUPER SHARP POINT (SS)Designed for piercing timber, mdf, plastic and light gauge metal up to 0.6mm without pre-drilling.
AB POINTFor use in heavy sheet material applications.
B POINTFor use in shallow holes.
SELF DRILL POINTFor drilling into metals without the need for pre-drilling.
TYPE 17 POINTAlso known as slash point, they are used for fixing timber without the need to pre-drill. The slot at the end forms a cutting edge which reduces splitting of timber. It also penetrates thin sheet metal if required.
DOUBLE SLASH POINTDesigned to assist precisely when used in hard material such as plastic and thin sheet metal.
Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ metric equivalents in brackets.
TIM DRIVE RECESS / TORX DRIVEHigh performance recess on TIMco Multi-Fix and Velocity Screws.
PHILLIPS RECESSStandard recess for self-drilling and drywall screws.
CROSS-RECESS / POZI RECESSStandard recess for woodscrews, chipboard screws etc.
SLOTTED RECESSTraditional recess for certain woodscrews.
SQUARE RECESS / ROBERTSON DRIVERecess on square drive pan self-drilling screws.
NB: All Technical Information is stated for a guide only. Box, carton and pallet quantities are subject to change without notification.
Thread Types
Point Styles
Recess Styles
Recommended Drill Speeds
Metric/Imperial Size Comparison Chart
Imperial(inch)
Metric(mm)
1/64” 0.401/32” 0.793/64” 1.191/16” 1.595/64” 1.983/32” 2.387/64” 2.781/8” 3.17 (3.0)
9/64” 3.575/32” 3.97 (4.0)
11/64” 4.373/16” 4.76 (5.0)
13/64” 5.167/32” 5.56
15/64” 5.951/4” 6.35 (6/6.5)
17/64” 6.759/32” 7.14
19/64” 7.545/16” 7.94 (8.0)
21/64” 8.3311/32” 8.7323/64” 9.13
3/8” 9.52 (10.0)25/64” 9.9213/32” 10.3227/64” 10.727/16” 11.11
29/64” 11.5115/32” 11.9131/64” 12.30
1/2” 12.70 (13.0)17/32” 13.4935/64” 13.899/16” 14.29 (14.0)
37/64” 14.6819/32” 15.0839/64” 15.48
5/8” 15.88 (16.0)41/64” 16.2721/32” 16.6743/64” 17.0611/16” 17.4645/64” 17.8623/32” 18.2647/64” 18.65
3/4” 19.05 (19.0)49/64” 19.4525/32” 19.8451/64” 20.24
RPMMaterial / Type
1500 - 2000Metal
1500Timber
800Stainless Steel
1,000Chipboard
500PVCu
Imperial(inch)
Metric(mm)
13/16” 20.6453/64” 21.0327/32” 21.4355/64” 21.83
7/8” 22.23 (22.0)57/64” 22.6229/32” 23.0259/64” 23.4215/16” 23.8161/64” 24.2131/32” 24.6163/64” 25.00
1” 25.40 (25.0)1-1/16” 26.991-3/32” 27.781-1/8” 28.58 (28.0)
1-5/32” 29.371-3/16” 30.16 (30.0)1-7/32” 30.961-1/4” 31.75 (32.0)1-1/2” 38.10 (38.0)1-3/4” 45.45 (45.0)
2” 50.80 (50.0)2-1/4” 57.15 (57.0)2-1/2” 63.50 (65.0)2-3/4” 69.85 (70.0)
3” 76.20 (75.0)3-1/4” 82.55 (82.0)3-1/2” 88.90 (90.0)3-3/4” 95.25 (95.0)
4” 101.60 (100)4-1/2” 114.30 (115)
5” 127.00 (125)5-1/2” 139.70 (140)
6” 152.40(150)6-1/2” 165.10 (165)
7” 177.80 (180)7-1/2” 190.50 (190)
8” 203.20 (200)8-1/2” 215.90 (215)
9” 228.60 (230)9-1/2” 241.30 (240)
10” 254.00 (250/255)11” 279.40 (280)12” 304.80 (305)13” 330.20 (330)14” 335.60 (350/355)15” 381.00 (380)16” 406.40 (400/405)18” 457.20 (455/460)
The TPI is the number of thread crests that can be counted within 1” (25.4mm)
TPI - Threads per inch
COARSE THREAD (up to 16 TPI)Also know as spaced threads, they are normally used for all timber applications and for steel with lesser thickness (1-2.4mm normally).
FINE THREAD (over 16 TPI) Also known as metric threads, they are only used in steel applications. Fine threads are for use with thicker steels (2.4 - 12mm thickness).
TWIN THREAD Also known as twin lead threads, they are designed to give a fast insertion time in soft material.
HI-LO THREAD. Is used in soft timbers, plastics and into thin sheet sections. Hi-Lo threads have superior holding power compared to a low TPI coarse thread in these types of material.
Drill Tip
TPI
TPI
Drill Tip
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
9
SCREW SIZE &
INFO
RMATIO
N
The unique patented TIMco Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. The Velocity screw is designed and manufactured using the most
advanced technology giving the user a consistent and reliable product that can be used in a variety of applications.
®
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Hardwood
Thin Sheet Metal
PVCu
MDF
Chipboard
Softwood
To BS EN ISO 14592:2008
The TIMco premium multi-use screws carry the mark in compliance
with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
®
®
10
• Partially Threaded from 40mm
To assist clamping of material.
Velocity® Premium Screw - Cross-Recess
TIMco Code
Size (Metric)
Size (Imp equiv.)
Thread (mm)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30016VY 3.0 x 16 4 x 5/8 16 200 28,000 1,008,000 No. 130020VY 3.0 x 20 4 x 3/4 20 200 28,000 1,008,000 No. 130030VY 3.0 x 30 4 x 1 1/4 30 200 15,000 360,000 No. 130035VY 3.0 x 35 4 x 1 3/8 35 200 10,000 240,000 No. 130040VY 3.0 x 40 4 x 1 1/2 40 200 10,000 240,000 No. 135012VY 3.5 x 12 6 x 1/2 12 200 28,000 1,008,000 No. 235016VY 3.5 x 16 6 x 5/8 16 200 28,000 1,008,000 No. 235020VY 3.5 x 20 6 x 3/4 20 200 15,000 360,000 No. 235025VY 3.5 x 25 6 x 1 25 200 15,000 360,000 No. 235030VY 3.5 x 30 6 x 1 1/4 30 200 15,000 360,000 No. 235035VY 3.5 x 35 6 x 1 3/8 35 200 10,000 240,000 No. 235040VY 3.5 x 40 6 x 1 1/2 30 200 10,000 240,000 No. 235045VY 3.5 x 45 6 x 1 3/4 30 200 7,000 252,000 No. 235050VY 3.5 x 50 6 x 2 30 200 7,000 168,000 No. 240012VY 4.0 x 12 8 x 1/2 12 200 28,000 1,008,000 No. 240016VY 4.0 x 16 8 x 5/8 16 200 15,000 540,000 No. 240020VY 4.0 x 20 8 x 3/4 20 200 15,000 360,000 No. 240025VY 4.0 x 25 8 x 1 25 200 15,000 360,000 No. 240030VY 4.0 x 30 8 x 1 1/4 30 200 10,000 240,000 No. 240035VY 4.0 x 35 8 x 1 3/8 35 200 10,000 240,000 No. 240040VY 4.0 x 40 8 x 1 1/2 30 200 10,000 168,000 No. 240045VY 4.0 x 45 8 x 1 3/4 30 200 7,000 168,000 No. 240050VY 4.0 x 50 8 x 2 30 200 7,000 168,000 No. 240060VY 4.0 x 60 8 x 2 1/2 40 200 3,000 108,000 No. 240070VY 4.0 x 70 8 x 2 3/4 40 200 3,000 108,000 No. 240080VY 4.0 x 80 8 x 3 50 200 3,200 76,800 No. 245016VY 4.5 x 16 9 x 5/8 16 200 15,000 360,000 No. 245020VY 4.5 x 20 9 x 3/4 20 200 15,000 360,000 No. 245030VY 4.5 x 30 9 x 1 1/4 30 200 10,000 240,000 No. 245040VY 4.5 x 40 9 x 1 1/2 30 200 7,000 168,000 No. 245050VY 4.5 x 50 9 x 2 30 200 3,000 108,000 No. 245055VY 4.5 x 55 9 x 2 3/8 40 200 3,000 76,800 No. 245060VY 4.5 x 60 9 x 2 1/2 40 200 3,000 76,800 No. 245070VY 4.5 x 70 9 x 2 3/4 40 200 3,200 76,800 No. 245080VY 4.5 x 80 9 x 3 50 200 3,200 76,800 No. 250020VY 5.0 x 20 10 x 3/4 20 200 10,000 240,000 No. 250030VY 5.0 x 30 10 x 1 1/4 30 200 7,000 168,000 No. 250040VY 5.0 x 40 10 x 1 1/2 30 200 7,000 252,000 No. 250045VY 5.0 x 45 10 x 1 3/4 30 200 3,000 108,000 No. 250050VY 5.0 x 50 10 x 2 30 200 3,000 108,000 No. 250060VY 5.0 x 60 10 x 2 1/2 40 200 3,200 76,800 No. 250070VY 5.0 x 70 10 x 2 3/4 40 200 3,200 76,800 No. 250075VY 5.0 x 75 10 x 2 7/8 40 200 3,200 76,800 No. 250080VY 5.0 x 80 10 x 3 50 200 3,200 76,800 No. 250090VY 5.0 x 90 10 x 3 1/2 60 100 1,500 54,000 No. 250100VY 5.0 x 100 10 x 4 60 100 1,500 54,000 No. 260040VY 6.0 x 40 12 x 1 1/2 30 200 3,000 108,000 No. 360045VY 6.0 x 45 12 x 1 3/4 30 200 3,000 108,000 No. 360050VY 6.0 x 50 12 x 2 30 200 3,200 76,800 No. 360060VY 6.0 x 60 12 x 2 1/2 40 200 3,200 76,800 No. 360070VY 6.0 x 70 12 x 2 3/4 40 200 2,400 76,800 No. 360080VY 6.0 x 80 12 x 3 50 200 2,400 57,600 No. 360090VY 6.0 x 90 12 x 3 1/2 60 100 1,500 54,000 No. 360100VY 6.0 x 100 12 x 4 70 100 1,500 54,000 No. 360120VY 6.0 x 120 12 x 4 3/4 70 100 1,600 38,400 No. 360130VY 6.0 x 130 12 x 5 70 100 1,200 28,800 No. 360150VY 6.0 x 150 12 x 6 70 100 1,200 28,800 No. 360180VY 6.0 x 180 12 x 7 1/4 70 100 800 19,200 No. 360200VY 6.0 x 200 12 x 8 70 100 800 19,200 No. 3
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Velocity® Premium Screw - Torx DriveBoxes Include Free Torx Driver
TIMco Code
Size (Metric)
Size (Imp equiv.)
Thread (mm)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size*
50050VYTX 5.0 x 50 10 x 2 30 200 3,000 108,000 T2550060VYTX 5.0 x 60 10 x 2 1/2 40 200 3,200 76,800 T2550070VYTX 5.0 x 70 10 x 2 3/4 40 200 3,200 76,800 T2550080VYTX 5.0 x 80 10 x 3 50 200 3,200 76,800 T2550100VYTX 5.0 x 100 10 x 4 60 100 1,500 54,000 T2560080VYTX 6.0 x 80 12 x 3 50 200 2,400 57,600 T3060100VYTX 6.0 x 100 12 x 4 70 100 1,500 54,000 T3060120VYTX 6.0 x 120 12 x 4 3/4 70 100 1,600 38,400 T3060150VYTX 6.0 x 150 12 x 6 70 100 1,200 28,800 T3060180VYTX 6.0 x 180 12 x 7 1/4 70 100 800 19,200 T3060200VYTX 6.0 x 200 12 x 8 70 100 800 19,200 T3080200VYTX 8.0 x 200 16 x 8 70 50 400 9,600 T4080225VYTX 8.0 x 225 16 x 9 70 50 300 7,200 T4080250VYTX 8.0 x 250 16 x 10 70 50 300 7,200 T4080275VYTX 8.0 x 275 16 x 10 7/8 70 25 225 3,600 T4080300VYTX 8.0 x 300 16 x 12 70 25 225 3,600 T40
11
RIBS UNDER HEAD FOR IMPROVED COUNTER- SINKING
CLASSIC THREAD FOR A SECURE FIXING
DEEP RECESS TO PREVENT"CAM-OUT"
NEW
TWIN CUT MULTI-PURPOSE SCREW
The NEW TIMco Classic C2 has been re-engineered around the backbone of the TIMco Classic, one of Europe’s largest selling Multi-Purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance Multi-Purpose screw.
Positive Drive RecessThe TIMco C2 recess is manufactured using state of the art machinery, dies, and quality control procedures, giving a precise and positive drive control on every screw.
Engineered CountersinkThe TIMco C2 Countersinking Ribs have been designed and positioned to sit under the countersinks of the ironmongery and hinges to give a smooth and flush finish and prevents plating and material damage.
Twin-Cut Technology
The TIMco C2 is first in its category to offer parallel twin cut manufacturing technology; this patented method of manufacturing applies the cuts in exactly the same position and angle every time. Using this technology our designers and engineers have developed a new generation in fasteners that gives a consistent and exceptional level of performance in multiple materials.
Unique Synthetic LubricationThe TIMco C2 has been coated with a high-molecular polymer lubricant that dramatically reduces insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
12
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
12
Classic C2® Yellow
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
35030C2 3.5 x 30 6 x 1 1/4 200 15,000 360,000 No.235040C2 3.5 x 40 6 x 1 1/2 200 10,000 240,000 No.235050C2 3.5 x 50 6 x 2 200 7,000 168,000 No.240030C2 4.0 x 30 8 x 1 1/4 200 15,000 360,000 No.240035C2 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040C2 4.0 x 40 8 x 1 1/2 200 10,000 240,000 No.240045C2 4.0 x 45 8 x 1 3/4 200 7,000 168,000 No.240050C2 4.0 x 50 8 x 2 200 7,000 168,000 No.240060C2 4.0 x 60 8 x 2 1/2 200 3,000 108,000 No.240070C2 4.0 x 70 8 x 2 3/4 200 3,000 108,000 No.240080C2 4.0 x 80 8 x 3 200 3,200 76,800 No.245030C2 4.5 x 30 9 x 1 1/4 200 10,000 240,000 No.245040C2 4.5 x 40 9 x 1 1/2 200 7,000 168,000 No.245050C2 4.5 x 50 9 x 2 200 3,000 108,000 No.245060C2 4.5 x 60 9 x 2 1/2 200 3,000 108,000 No.245070C2 4.5 x 70 9 x 2 3/4 200 3,200 76,800 No.245080C2 4.5 x 80 9 x 3 200 3,200 76,800 No.250030C2 5.0 x 30 10 x 1 1/4 200 10,000 240,000 No.250040C2 5.0 x 40 10 x 1 1/2 200 7,000 168,000 No.250045C2 5.0 x 45 10 x 1 3/4 200 3,000 108,000 No.250050C2 5.0 x 50 10 x 2 200 3,000 108,000 No.250060C2 5.0 x 60 10 x 2 1/2 200 3,200 76,800 No.250070C2 5.0 x 70 10 x 2 3/4 200 3,200 76,800 No.250075C2 5.0 x 75 10 x 2 7/8 200 3,200 76,800 No.250080C2 5.0 x 80 10 x 3 200 3,200 76,800 No.250090C2 5.0 x 90 10 x 3 1/2 100 1,500 54,000 No.250100C2 5.0 x 100 10 x 4 100 1,500 54,000 No.250120C2 5.0 x 120 10 x 4 3/4 100 1,500 54,000 No.260050C2 6.0 x 50 12 x 2 200 3,200 76,800 No.360060C2 6.0 x 60 12 x 2 1/2 200 3,200 76,800 No.360070C2 6.0 x 70 12 x 2 3/4 200 2,400 57,600 No.360080C2 6.0 x 80 12 x 3 200 2,400 57,600 No.360090C2 6.0 x 90 12 x 3 1/2 100 1,500 54,000 No.360100C2 6.0 x 100 12 x 4 100 1,500 54,000 No.360120C2 6.0 x 120 12 x 4 3/4 100 1,600 38,400 No.360130C2 6.0 x 130 12 x 5 1/8 100 1,200 28,800 No.360150C2 6.0 x 150 12 x 6 100 1,200 28,800 No.360180C2 6.0 x 180 12 x 7 1/4 100 800 19,200 No.360200C2 6.0 x 200 12 x 8 100 800 19,200 No.3
PATE
NTE
D TW
IN
CUT TECHNOLOGY
Classic C2® Yellow
TIMco Code
Size (Metric)
Tub Qty
Tubsper
Carton
Carton Qty
PalletQty
40030C2TUB 4.0 x 30 1500 4 6,000 216,000 40040C2TUB 4.0 x 40 1200 4 4,800 172,800 40050C2TUB 4.0 x 50 800 4 3,200 115,200 50050C2TUB 5.0 x 50 600 4 2,400 86,400 50060C2TUB 5.0 x 60 400 4 1,600 57,600 50070C2TUB 5.0 x 70 375 4 1,500 54,000 50080C2TUB 5.0 x 80 350 4 1,400 50,400 500100C2TUB 5.0 x 100 300 4 1,200 43,200
TWIN CUT FOR RAPID "PICK-UP" & REDUCED SPLITTING
RAPID INSTALLATION INTO
Hardwood Softwood Chipboard MDFPlasticThin Sheet Metal
52% LESS TORQUE
UP TO 43%QUICKER
IMPACT BITS5 FREEBOXES
1313
The exceptional reliability and strength of the TIMco Classic Multi-Purpose Screw enables the user to rely on one product for a variety of applications.
Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
Available in:• Zinc & Yellow Passivated• A2 Stainless Steel• Nickel Plated & Clear Passivated• Black Passivated• Zinc
Special Thread Configuration
Gives an ultimate performance and an
exceptionally high pull-out resistance.
Surface Hardened Up to 750 HV to prevent
torque shearing under load and a core hardness
of up to 450 HV for improved ductility.
Double CountersunkReduces the likelihood
of head shear and assists completion of
countersinking.
40° Deep Single ThreadTo provide a secure
fixing with high pull-out resistance.
Fully Threaded up to 70mm
Thereafter partially threaded.
Molecular Lubrication
New patented lubrication,designed to enhance screw insertion time and provides greater
resistance to corrosion.
25° Sharp Point For easy penetration into
wood, MDF, chipboard, plastics and thin sheet metal.
Made from C10-22 SteelEnsures consistent quality
and strength. Full batch traceability to the original
steel mill certificate.
Plated with... 5 - 8 microns of zinc & yellow
passivate to give a high resistance to corrosion.
Hardwood
Thin Sheet Metal
PVCu
MDF
Chipboard
Softwood
To BS EN ISO 14592:2008
The TIMco multi-purpose screws carry the mark in compliance with the
Construction Products Regulations (Eurocode 5 EN1995-1-1)
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
14
CLASSIC® M
ULTI-PU
RPOSE SCREW
S
Classic® Yellow Cross-Recess Double Countersunk
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012CLAF 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130016CLAF 3.0 x 16 4 x 5/8 200 28,000 1,008,000 No.130020CLAF 3.0 x 20 4 x 3/4 200 28,000 1,008,000 No.130025CLAF 3.0 x 25 4 x 1 200 15,000 360,000 No.130030CLAF 3.0 x 30 4 x 1 1/4 200 15,000 360,000 No.130035CLAF 3.0 x 35 4 x 1 3/8 200 10,000 240,000 No.130040CLAF 3.0 x 40 4 x 1 1/2 200 10,000 240,000 No.135012CLAF 3.5 x 12 6 x 1/2 200 28,000 1,008,000 No.235016CLAF 3.5 x 16 6 x 5/8 200 28,000 1,008,000 No.235020CLAF 3.5 x 20 6 x 3/4 200 15,000 360,000 No.235025CLAF 3.5 x 25 6 x 1 200 15,000 360,000 No.235030CLAF 3.5 x 30 6 x 1 1/4 200 15,000 360,000 No.235035CLAF 3.5 x 35 6 x 1 3/8 200 10,000 240,000 No.235040CLAF 3.5 x 40 6 x 1 1/2 200 7,000 168,000 No.235045CLAF 3.5 x 45 6 x 1 3/4 200 7,000 168,000 No.235050CLAF 3.5 x 50 6 x 2 200 7,000 168,000 No.240012CLAF 4.0 x 12 8 x 1/2 200 28,000 1,008,000 No.240016CLAF 4.0 x 16 8 x 5/8 200 15,000 540,000 No.240020CLAF 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025CLAF 4.0 x 25 8 x 1 200 15,000 360,000 No.240030CLAF 4.0 x 30 8 x 1 1/4 200 10,000 240,000 No.240035CLAF 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040CLAF 4.0 x 40 8 x 1 1/2 200 7,000 168,000 No.240045CLAF 4.0 x 45 8 x 1 3/4 200 7,000 168,000 No.240050CLAF 4.0 x 50 8 x 2 200 7,000 168,000 No.240055CLAF 4.0 x 55 8 x 2 3/8 200 3,000 108,000 No.240060CLAF 4.0 x 60 8 x 2 1/2 200 3,000 108,000 No.240070CLAF 4.0 x 70 8 x 2 3/4 200 3,000 108,000 No.240080CLAF 4.0 x 80 8 x 3 200 3,200 76,800 No.245016CLAF 4.5 x 16 9 x 5/8 200 15,000 360,000 No.245020CLAF 4.5 x 20 9 x 3/4 200 15,000 360,000 No.245025CLAF 4.5 x 25 9 x 1 200 10,000 240,000 No.245030CLAF 4.5 x 30 9 x 1 1/4 200 10,000 240,000 No.245035CLAF 4.5 x 35 9 x 1 3/8 200 7,000 168,000 No.245040CLAF 4.5 x 40 9 x 1 1/2 200 7,000 168,000 No.245045CLAF 4.5 x 45 9 x 1 3/4 200 3,000 108,000 No.245050CLAF 4.5 x 50 9 x 2 200 3,000 108,000 No.245055CLAF 4.5 x 55 9 x 2 3/8 200 3,200 76,800 No.245060CLAF 4.5 x 60 9 x 2 1/2 200 3,000 108,000 No.245070CLAF 4.5 x 70 9 x 2 3/4 200 3,200 76,800 No.245080CLAF 4.5 x 80 9 x 3 200 3,200 76,800 No.250020CLAF 5.0 x 20 10 x 3/4 200 10,000 240,000 No.250025CLAF 5.0 x 25 10 x 1 200 10,000 240,000 No.250030CLAF 5.0 x 30 10 x 1 1/4 200 7,000 168,000 No.250035CLAF 5.0 x 35 10 x 1 3/8 200 7,000 168,000 No.250040CLAF 5.0 x 40 10 x 1 1/2 200 3,000 108,000 No.250045CLAF 5.0 x 45 10 x 1 3/4 200 3,000 108,000 No.250050CLAF 5.0 x 50 10 x 2 200 3,000 108,000 No.250055CLAF 5.0 x 55 10 x 2 3/8 200 3,200 76,800 No.250060CLAF 5.0 x 60 10 x 2 1/2 200 3,200 76,800 No.250070CLAF 5.0 x 70 10 x 2 3/4 200 3,200 76,800 No.250075CLAF 5.0 x 75 10 x 2 7/8 200 3,200 76,800 No.250080CLAF 5.0 x 80 10 x 3 200 3,200 76,800 No.250090CLAF 5.0 x 90 10 x 3 1/2 100 1,500 54,000 No.250100CLAF 5.0 x 100 10 x 4 100 1,500 54,000 No.250120CLAF 5.0 x 120 10 x 4 3/4 100 1,500 54,000 No.260040CLAF 6.0 x 40 12 x 1 1/2 200 3,000 108,000 No.360045CLAF 6.0 x 45 12 x 1 3/4 200 3,000 108,000 No.360050CLAF 6.0 x 50 12 x 2 200 3,200 76,800 No.360060CLAF 6.0 x 60 12 x 2 1/2 200 3,200 76,800 No.360070CLAF 6.0 x 70 12 x 2 3/4 200 3,200 76,800 No.360080CLAF 6.0 x 80 12 x 3 200 2,400 57,600 No.360090CLAF 6.0 x 90 12 x 3 1/2 100 1,500 54,000 No.360100CLAF 6.0 x 100 12 x 4 100 1,500 54,000 No.360120CLAF 6.0 x 120 12 x 4 3/4 100 1,600 38,400 No.360130CLAF 6.0 x 130 12 x 5 1/8 100 1,200 28,800 No.360150CLAF 6.0 x 150 12 x 6 100 1,200 28,800 No.360180CLAF 6.0 x 180 12 x 7 1/4 100 800 19,200 No.360200CLAF 6.0 x 200 12 x 8 100 800 19,200 No.3
Note: Only available in multiples of 1,000 pieces (Except sizes 6.0 x 100 up to 6.0 x 200 sold in 100’s)
Our best selling multi-purpose screw, over 4.11/4 billion sold to date.
Classic® Zinc Cross-Recess Double Countersunk
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012CLAZ 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130016CLAZ 3.0 x 16 4 x 5/8 200 28,000 1,008,000 No.130020CLAZ 3.0 x 20 4 x 3/4 200 28,000 1,008,000 No.130025CLAZ 3.0 x 25 4 x 1 200 15,000 360,000 No.135012CLAZ 3.5 x 12 6 x 1/2 200 28,000 1,008,000 No.235016CLAZ 3.5 x 16 6 x 5/8 200 28,000 1,008,000 No.235020CLAZ 3.5 x 20 6 x 3/4 200 15,000 360,000 No.235025CLAZ 3.5 x 25 6 x 1 200 15,000 360,000 No.235030CLAZ 3.5 x 30 6 x 1 1/4 200 15,000 360,000 No.235035CLAZ 3.5 x 35 6 x 1 3/8 200 10,000 240,000 No.235040CLAZ 3.5 x 40 6 x 1 1/2 200 10,000 168,000 No.235050CLAZ 3.5 x 50 6 x 2 200 7,000 168,000 No.240016CLAZ 4.0 x 16 8 x 5/8 200 15,000 540,000 No.240020CLAZ 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025CLAZ 4.0 x 25 8 x 1 200 15,000 360,000 No.240030CLAZ 4.0 x 30 8 x 1 1/4 200 15,000 360,000 No.240035CLAZ 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040CLAZ 4.0 x 40 8 x 1 1/2 200 10,000 168,000 No.240045CLAZ 4.0 x 45 8 x 1 3/4 200 7,000 168,000 No.240050CLAZ 4.0 x 50 8 x 2 200 7,000 168,000 No.240055CLAZ 4.0 x 55 8 x 2 3/8 200 3,000 108,000 No.240060CLAZ 4.0 x 60 8 x 2 1/2 200 3,000 108,000 No.240070CLAZ 4.0 x 70 8 x 2 3/4 200 3,000 108,000 No.245025CLAZ 4.5 x 25 9 x 5/8 200 10,000 240,000 No.245030CLAZ 4.5 x 30 9 x 1 1/4 200 10,000 240,000 No.245040CLAZ 4.5 x 40 9 x 1 1/2 200 7,000 168,000 No.245050CLAZ 4.5 x 50 9 x 2 200 3,000 108,000 No.245070CLAZ 4.5 x 70 9 x 2 3/4 200 3,200 76,800 No.245080CLAZ 4.5 x 80 9 x 3 200 3,200 76,800 No.250025CLAZ 5.0 x 25 10 x 1 200 10,000 240,000 No.250030CLAZ 5.0 x 30 10 x 1 1/4 200 10,000 168,000 No.250035CLAZ 5.0 x 35 10 x 1 3/8 200 7,000 168,000 No.250040CLAZ 5.0 x 40 10 x 1 1/2 200 3,000 108,000 No.250050CLAZ 5.0 x 50 10 x 2 200 3,000 108,000 No.250060CLAZ 5.0 x 60 10 x 2 1/2 200 3,200 76,800 No.250070CLAZ 5.0 x 70 10 x 2 3/4 200 3,200 76,800 No.250080CLAZ 5.0 x 80 10 x 3 200 3,200 76,800 No.250090CLAZ 5.0 x 90 10 x 3 1/2 100 1,500 54,000 No.250100CLAZ 5.0 x 100 10 x 4 100 1,500 54,000 No.260040CLAZ 6.0 x 40 12 x 1 1/2 200 3,000 108,000 No.360050CLAZ 6.0 x 50 12 x 2 200 3,200 76,800 No.360070CLAZ 6.0 x 70 12 x 2 3/4 200 3,200 76,800 No.360080CLAZ 6.0 x 80 12 x 3 200 2,400 57,600 No.360100CLAZ 6.0 x 100 12 x 4 100 1,500 54,000 No.3
15
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieCLA
SSIC® MU
LTI-PURPO
SE SCREWS
Classic® A2 Stainless SteelCross-Recess Double Countersunk
TIMco Code
Size (Metric)
Size (Imp equiv.)
Pilot Hole 0 (mm)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012CLASS 3.0 x 12 4 x 1/2 1.5 200 28,000 1,008,000 No.130016CLASS 3.0 x 16 4 x 5/8 1.5 200 28,000 1,008,000 No.130020CLASS 3.0 x 20 4 x 3/4 1.5 200 28,000 1,008,000 No.130025CLASS 3.0 x 25 4 x 1 1.5 200 15,000 360,000 No.135012CLASS 3.5 x 12 6 x 1/2 2.0 200 28,000 1,008,000 No.235016CLASS 3.5 x 16 6 x 5/8 2.0 200 28,000 1,008,000 No.235020CLASS 3.5 x 20 6 x 3/4 2.0 200 15,000 360,000 No.235025CLASS 3.5 x 25 6 x 1 2.0 200 15,000 360,000 No.235030CLASS 3.5 x 30 6 x 1 1/4 2.0 200 15,000 360,000 No.235035CLASS 3.5 x 35 6 x 1 3/8 2.0 200 10,000 240,000 No.235040CLASS 3.5 x 40 6 x 1 1/2 2.0 200 7,000 168,000 No.235050CLASS 3.5 x 50 6 x 2 2.0 200 7,000 168,000 No.240016CLASS 4.0 x 16 8 x 5/8 2.5 200 15,000 540,000 No.240020CLASS 4.0 x 20 8 x 3/4 2.5 200 15,000 360,000 No.240025CLASS 4.0 x 25 8 x 1 2.5 200 15,000 360,000 No.240030CLASS 4.0 x 30 8 x 1 1/4 2.5 200 10,000 240,000 No.240035CLASS 4.0 x 35 8 x 1 3/8 2.5 200 10,000 240,000 No.240040CLASS 4.0 x 40 8 x 1 1/2 2.5 200 10,000 240,000 No.240045CLASS 4.0 x 45 8 x 1 3/4 2.5 200 7,000 168,000 No.240050CLASS 4.0 x 50 8 x 2 2.5 200 7,000 168,000 No.240060CLASS 4.0 x 60 8 x 2 1/2 2.5 200 3,000 108,000 No.240070CLASS 4.0 x 70 8 x 2 3/4 2.5 200 3,000 108,000 No.245025CLASS 4.5 x 25 9 x 5/8 2.5 200 10,000 240,000 No.245030CLASS 4.5 x 30 9 x 1 1/4 2.5 200 10,000 240,000 No.245040CLASS 4.5 x 40 9 x 1 1/2 2.5 200 7,000 168,000 No.245050CLASS 4.5 x 50 9 x 2 2.5 200 3,000 108,000 No.245060CLASS 4.5 x 60 9 x 2 1/2 2.5 200 3,200 76,800 No.250025CLASS 5.0 x 25 10 x 1 2.5 200 10,000 240,000 No.250030CLASS 5.0 x 30 10 x 1 1/4 2.5 200 7,000 168,000 No.250035CLASS 5.0 x 35 10 x 1 3/8 2.5 200 7,000 168,000 No.250040CLASS 5.0 x 40 10 x 1 1/2 2.5 200 3,000 108,000 No.250050CLASS 5.0 x 50 10 x 2 2.5 200 3,000 108,000 No.250060CLASS 5.0 x 60 10 x 2 1/2 3.0 200 3,200 76,800 No.250070CLASS 5.0 x 70 10 x 2 3/4 3.0 200 3,200 76,800 No.250080CLASS 5.0 x 80 10 x 3 3.0 200 3,200 76,800 No.250090CLASS 5.0 x 90 10 x 3 1/2 3.0 100 1,500 54,000 No.250100CLASS 5.0 x 100 10 x 4 3.0 100 1,500 54,000 No.260040CLASS 6.0 x 40 12 x 1 1/2 3.5 200 3,000 108,000 No.360050CLASS 6.0 x 50 12 x 2 3.5 200 3,200 76,800 No.360060CLASS 6.0 x 60 12 x 2 1/2 3.5 200 3,200 76,800 No.360070CLASS 6.0 x 70 12 x 2 3/4 3.5 200 2,400 76,800 No.360080CLASS 6.0 x 80 12 x 3 3.5 200 2,400 57,600 No.360100CLASS 6.0 x 100 12 x 4 3.5 100 1,500 54,000 No.3
Classic® Black Passivated Cross-Recess Double Countersunk
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty Carton Qty
Pallet Qty
Driver Bit Size
35016CLAB 3.5 x 16 6 x 5/8 200 28,000 1,008,000 No.235025CLAB 3.5 x 25 6 x 1 200 25,000 540,000 No.240025CLAB 4.0 x 25 8 x 1 200 15,000 360,000 No.240030CLAB 4.0 x 30 8 x 1 1/4 200 10,000 240,000 No.240040CLAB 4.0 x 40 8 x 1 1/2 200 7,000 168,000 No.245030CLAB 4.5 x 30 9 x 1 1/4 200 10,000 240,000 No.250030CLAB 5.0 x 30 10 x 1 1/4 200 7,000 168,000 No.250040CLAB 5.0 x 40 10 x 1 1/2 200 3,000 108,000 No.250080CLAB 5.0 x 80 10 x 3 100 1,600 38,400 No.2
Classic® Yellow Cross-Recess Pan Head
Classic® Yellow Cross-Recess Countersunk Hinge Screw (Reduced 5mm Head)
Classic® Nickel Cross-Recess Countersunk Hinge Screw (Reduced 5mm Head)
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
35012CLAP 3.5 x 12 6 x 1/2 200 28,000 1,008,000 No.235016CLAP 3.5 x 16 6 x 5/8 200 28,000 1,008,000 No.235020CLAP 3.5 x 20 6 x 3/4 200 15,000 360,000 No.235025CLAP 3.5 x 25 6 x 1 200 15,000 360,000 No.240016CLAP 4.0 x 16 8 x 5/8 200 15,000 540,000 No.240020CLAP 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025CLAP 4.0 x 25 8 x 1 200 15,000 360,000 No.240030CLAP 4.0 x 30 8 x 1 1/4 200 10,000 240,000 No.240035CLAP 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040CLAP 4.0 x 40 8 x 1 1/2 200 7,000 168,000 No.240050CLAP 4.0 x 50 8 x 2 200 7,000 168,000 No.250030CLAP 5.0 x 30 10 x 1 1/4 200 7,000 168,000 No.250050CLAP 5.0 x 50 10 x 2 200 3,000 108,000 No.2
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012CLAH 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130016CLAH 3.0 x 16 4 x 5/8 200 28,000 1,008,000 No.130020CLAH 3.0 x 20 4 x 3/4 200 28,000 1,008,000 No.130025CLAH 3.0 x 25 4 x 1 200 15,000 360,000 No.1
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012CLAHN 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130016CLAHN 3.0 x 16 4 x 5/8 200 28,000 1,008 ,000 No.130020CLAHN 3.0 x 20 4 x 3/4 200 28,000 1,008,000 No.1
Note: Classic Stainless Steel screws are only sold in box quantities
Note: Only sold in multiples of 1,000 pieces
Note: Only sold in multiples of 1,000 pieces
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
16
CLASSIC® M
ULTI-PU
RPOSE SCREW
S
Key Features
Solo Zinc Cross-Recess Double Countersunk
Solo Yellow Cross-Recess Double Countersunk
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012SOLOZ 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130015SOLOZ 3.0 x 15 4 x 5/8 200 28,000 1,008,000 No.135015SOLOZ 3.5 x 15 6 x 5/8 200 28,000 1,008,000 No.235020SOLOZ 3.5 x 20 6 x 3/4 200 15,000 540,000 No.235025SOLOZ 3.5 x 25 6 x 1 200 15,000 540,000 No.235030SOLOZ 3.5 x 30 6 x 1 1/4 200 15,000 360,000 No.235035SOLOZ 3.5 x 35 6 x 1 3/8 200 10,000 240,000 No.235040SOLOZ 3.5 x 40 6 x 1 1/2 200 7,000 168,000 No.235050SOLOZ 3.5 x 50 6 x 2 200 7,000 168,000 No.240015SOLOZ 4.0 x 15 8 x 5/8 200 15,000 540,000 No.240020SOLOZ 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025SOLOZ 4.0 x 25 8 x 1 200 15,000 360,000 No.240030SOLOZ 4.0 x 30 8 x 1 1/4 200 10,000 240,000 No.240035SOLOZ 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040SOLOZ 4.0 x 40 8 x 1 1/2 200 7,000 168,000 No.240045SOLOZ 4.0 x 45 8 x 1 3/4 200 7,000 168,000 No.240050SOLOZ 4.0 x 50 8 x 2 200 7,000 168,000 No.240060SOLOZ 4.0 x 60 8 x 2 1/2 200 3,000 108,000 No.240070SOLOZ 4.0 x 70 8 x 2 3/4 200 3,000 108,000 No.240080SOLOZ 4.0 x 80 8 x 3 200 3,000 108,000 No.245040SOLOZ 4.5 x 40 9 x 1 1/2 200 7,000 168,000 No.245050SOLOZ 4.5 x 50 9 x 2 200 3,000 108,000 No.245060SOLOZ 4.5 x 60 9 x 2 1/2 200 3,000 76,800 No.245070SOLOZ 4.5 x 70 9 x 2 3/4 200 3,200 76,800 No.245080SOLOZ 4.5 x 80 9 x 3 200 3,200 76,800 No.250025SOLOZ 5.0 x 25 10 x 1 200 10,000 240,000 No.250030SOLOZ 5.0 x 30 10 x 1 1/4 200 7,000 168,000 No.250040SOLOZ 5.0 x 40 10 x 1 1/2 200 3,000 108,000 No.250045SOLOZ 5.0 x 45 10 x 1 3/4 200 3,000 108,000 No.250050SOLOZ 5.0 x 50 10 x 2 200 3,000 108,000 No.250060SOLOZ 5.0 x 60 10 x 2 1/2 200 3,200 76,800 No.250070SOLOZ 5.0 x 70 10 x 2 3/4 200 3,200 76,800 No.250080SOLOZ 5.0 x 80 10 x 3 200 3,200 76,800 No.250090SOLOZ 5.0 x 90 10 x 3 1/2 100 1,500 54,000 No.250100SOLOZ 5.0 x 100 10 x 4 100 1,500 54,000 No.260050SOLOZ 6.0 x 50 12 x 2 200 3,200 76,800 No.360060SOLOZ 6.0 x 60 12 x 2 1/2 200 3,200 76,800 No.360080SOLOZ 6.0 x 80 12 x 3 200 2,400 57,600 No.360100SOLOZ 6.0 x 100 12 x 4 3/4 100 1,500 54,000 No.360120SOLOZ 6.0 x 120 12 x 5 1/8 100 1,600 38,400 No.360150SOLOZ 6.0 x 150 12 x 6 100 1,200 28,800 No.3
TIMco Code
Size (Metric)
Size (Imp equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
30012SOLOC 3.0 x 12 4 x 1/2 200 28,000 1,008,000 No.130015SOLOC 3.0 x 15 4 x 5/8 200 28,000 1,008,000 No.130017SOLOC 3.0 x 17 4 x 43/64 200 28,000 1,008,000 No.130020SOLOC 3.0 x 20 4 x 3/4 200 28,000 1,008,000 No.130025SOLOC 3.0 x 25 4 x 1 200 15,000 540,000 No.130030SOLOC 3.0 x 30 4 x 1 1/4 200 15,000 360,000 No.135012SOLOC 3.5 x 12 6 x 1/2 200 28,000 1,008,000 No.235015SOLOC 3.5 x 15 6 x 5/8 200 28,000 1,008,000 No.235017SOLOC 3.5 x 17 6 x 43/64 200 28,000 1,008,000 No.235020SOLOC 3.5 x 20 6 x 3/4 200 15,000 540,000 No.235025SOLOC 3.5 x 25 6 x 1 200 15,000 540,000 No.235030SOLOC 3.5 x 30 6 x 1 1/4 200 15,000 360,000 No.235035SOLOC 3.5 x 35 6 x 1 3/8 200 10,000 240,000 No.235040SOLOC 3.5 x 40 6 x 1 1/2 200 7,000 168,000 No.235050SOLOC 3.5 x 50 6 x 2 200 7,000 168,000 No.240015SOLOC 4.0 x 15 8 x 5/8 200 15,000 540,000 No.240017SOLOC 4.0 x 17 8 x 43/64 200 15,000 540,000 No.240020SOLOC 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025SOLOC 4.0 x 25 8 x 1 200 15,000 360,000 No.240030SOLOC 4.0 x 30 8 x 1 1/4 200 15,000 360,000 No.240035SOLOC 4.0 x 35 8 x 1 3/8 200 10,000 240,000 No.240040SOLOC 4.0 x 40 8 x 1 1/2 200 10,000 240,000 No.240045SOLOC 4.0 x 45 8 x 1 3/4 200 7,000 168,000 No.240050SOLOC 4.0 x 50 8 x 2 200 7,000 168,000 No.240060SOLOC 4.0 x 60 8 x 2 1/2 200 3,000 108,000 No.240070SOLOC 4.0 x 70 8 x 2 3/4 200 3,000 108,000 No.245020SOLOC 4.5 x 20 9 x 3/4 200 15,000 360,000 No.245030SOLOC 4.5 x 30 9 x 1 1/4 200 10,000 240,000 No.245035SOLOC 4.5 x 35 9 x 1 3/8 200 7,000 168,000 No.245040SOLOC 4.5 x 40 9 x 1 1/2 200 7,000 168,000 No.245045SOLOC 4.5 x 45 9 x 1 3/4 200 3,000 108,000 No.245050SOLOC 4.5 x 50 9 x 2 200 3,000 108,000 No.245060SOLOC 4.5 x 60 9 x 2 1/2 200 3,000 108,000 No.245070SOLOC 4.5 x 70 9 x 2 3/4 200 3,200 76,800 No.245080SOLOC 4.5 x 80 9 x 3 200 3,200 76,800 No.250025SOLOC 5.0 x 25 10 x 1 200 10,000 240,000 No.250030SOLOC 5.0 x 30 10 x 1 1/4 200 7,000 168,000 No.250035SOLOC 5.0 x 35 10 x 1 3/8 200 7,000 168,000 No.250040SOLOC 5.0 x 40 10 x 1 1/2 200 7,000 168,000 No.250045SOLOC 5.0 x 45 10 x 1 3/4 200 3,000 108,000 No.250050SOLOC 5.0 x 50 10 x 2 200 3,000 108,000 No.250060SOLOC 5.0 x 60 10 x 2 1/2 200 3,200 76,800 No.250070SOLOC 5.0 x 70 10 x 2 3/4 200 3,200 76,800 No.250080SOLOC 5.0 x 80 10 x 3 200 3,200 76,800 No.250090SOLOC 5.0 x 90 10 x 3 1/2 100 1,500 54,000 No.250100SOLOC 5.0 x 100 10 x 4 100 1,500 54,000 No.260040SOLOC 6.0 x 40 12 x 1 1/2 200 3,000 108,000 No.360050SOLOC 6.0 x 50 12 x 2 200 3,200 76,800 No.360060SOLOC 6.0 x 60 12 x 2 1/2 200 3,200 76,800 No.360070SOLOC 6.0 x 70 12 x 2 3/4 200 2,400 76,800 No.360080SOLOC 6.0 x 80 12 x 3 200 2,400 57,600 No.360090SOLOC 6.0 x 90 12 x 3 1/2 100 1,500 54,000 No.360100SOLOC 6.0 x 100 12 x 4 100 1,500 54,000 No.360120SOLOC 6.0 x 120 12 x 4 3/4 100 1,600 38,400 No.360130SOLOC 6.0 x 130 12 x 5 1/8 100 1,200 28,800 No.360150SOLOC 6.0 x 150 12 x 6 100 1,200 28,800 No.3
Materials
CertainHardwood PVC uSoftwood Chipboard
Fully threaded up to 70mm thereafter partially threaded
40° deep single thread 25° sharp point
Lubricated
Note: Only sold in multiples of 1,000 pieces (6x100 upwards sold in 100's)
To BS EN ISO 14592:2008
The TIMco Solo woodscrews carry the mark in compliance with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Solo Zinc Square-Recess Double Countersunk
Solo Zinc Square-Recess Pan Head
40020SQSZ 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025SQSZ 4.0 x 25 8 x 1 200 15,000 360,000 No.240040SQSZ 4.0 x 40 8 x 1 1/2 200 10,000 240,000 No.250040SQSZ 5.0 x 40 10 x 1 1/2 200 7,000 168,000 No.250050SQSZ 5.0 x 50 10 x 2 200 3,000 108,000 No.250080SQSZ 5.0 x 80 10 x 3 200 3,200 76,800 No.2
40020SQPSZ 4.0 x 20 8 x 3/4 200 15,000 360,000 No.240025SQPSZ 4.0 x 25 8 x 1 200 15,000 360,000 No.240040SQPSZ 4.0 x 40 8 x 1 1/2 200 10,000 240,000 No.250040SQPSZ 5.0 x 40 10 x 1 1/2 200 3,000 108,000 No.2
17
SOLO
WO
OD
SCREWS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
25° sharp point and single leading
thread for a fast start and improved thread acceptance
Surface hardened up to 750 HV
to prevent torque shearing under load and a core hardness of up
to 450 HV for improved ductility
Made from C10-18 Steel
to ensure consistent quality
Double countersunk reduces the likelihood of head shear and assists completion of countersinking
Plated in Zinc 3-5 microns
60° Twin-threads with parallel shank for faster insertion and greater pull out resistance
Large core diameter
Partially threaded after one inch to BS1210
Single lead start
CertainHardwood
Softwood
Key Features
Materials
• Designed and manufactured to BS 1210 Standards - major diameter and threads excepted.
• Full batch-traceability to the original steel mill certificate.
• Suitable for TIMco and all other leading plastic expansion plugs.
Twin Threaded - Cross-Recess
TIMco Code
Size (Imperial)
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00412CWZ 4 x 1/2 3.0 x 12 200 28,000 1,008,000 No.100458CWZ 4 x 5/8 3.0 x 16 200 28,000 1,008,000 No.100434CWZ 4 x 3/4 3.0 x 20 200 28,000 1,008,000 No.100041CWZ 4 x 1 3.0 x 25 200 15,000 360,000 No.100512CWZ 5 x 1/2 3.3 x 13 200 28,000 1,008,000 No.200558CWZ 5 x 5/8 3.3 x 16 200 28,000 1,008,000 No.200534CWZ 5 x 3/4 3.3 x 19 200 28,000 1,008,000 No.200612CWZ 6 x 1/2 3.5 x 12 200 28,000 1,008,000 No.200658CWZ 6 x 5/8 3.5 x 16 200 28,000 1,008,000 No.200634CWZ 6 x 3/4 3.5 x 20 200 15,000 360,000 No.200061CWZ 6 x 1 3.5 x 25 200 15,000 360,000 No.206114CWZ 6 x 1 1/4 3.5 x 30 200 10,000 240,000 No.206112CWZ 6 x 1 1/2 3.5 x 40 200 10,000 240,000 No.206134CWZ 6 x 1 3/4 3.5 x 45 200 7,000 168,000 No.200062CWZ 6 x 2 3.5 x 50 200 7,000 168,000 No.200758CWZ 7 x 5/8 3.9 x 16 200 15,000 540,000 No.200734CWZ 7 x 3/4 3.9 x 20 200 15,000 360,000 No.200071CWZ 7 x 1 3.9 x 25 200 15,000 360,000 No.207114CWZ 7 x 1 1/4 3.9 x 30 200 10,000 240,000 No.207112CWZ 7 x 1 1/2 3.9 x 40 200 7,000 168,000 No.200812CWZ 8 x 1/2 4.0 x 12 200 28,000 1,008,000 No.200858CWZ 8 x 5/8 4.0 x 16 200 15,000 360,000 No.200834CWZ 8 x 3/4 4.0 x 20 200 15,000 360,000 No.200081CWZ 8 x 1 4.0 x 25 200 15,000 360,000 No.208114CWZ 8 x 1 1/4 4.0 x 30 200 10,000 240,000 No.208112CWZ 8 x 1 1/2 4.0 x 40 200 7,000 168,000 No.208134CWZ 8 x 1 3/4 4.0 x 45 200 7,000 168,000 No.200082CWZ 8 x 2 4.0 x 50 200 3,000 108,000 No.208214CWZ 8 x 2 1/4 4.0 x 55 200 3,200 76,800 No.208212CWZ 8 x 2 1/2 4.0 x 60 200 3,200 76,800 No.200083CWZ 8 x 3 4.0 x 75 200 3,200 76,800 No.200083CWZ100 8 x 3 4.0 x 75 100 5,000 120,000 No.201034CWZ 10 x 3/4 5.0 x 20 200 10,000 240,000 No.200101CWZ 10 x 1 5.0 x 25 200 10,000 240,000 No.210114CWZ 10 x 1 1/4 5.0 x 30 200 10,000 240,000 No.210112CWZ 10 x 1 1/2 5.0 x 40 200 7,000 168,000 No.210134CWZ 10 x 1 3/4 5.0 x 45 200 3,000 108,000 No.200102CWZ 10 x 2 5.0 x 50 200 3,000 108,000 No.210214CWZ 10 x 2 1/4 5.0 x 55 200 3,200 76,800 No.210212CWZ 10 x 2 1/2 5.0 x 60 200 3,200 76,800 No.200103CWZ 10 x 3 5.0 x 75 200 3,200 76,800 No.200103CWZ100 10 x 3 5.0 x 75 100 1,500 54,000 No.210312CWZ 10 x 3 1/2 5.0 x 90 100 1,500 54,000 No.200104CWZ 10 x 4 5.0 x 100 100 1,500 54,000 No.200121CWZ 12 x 1 6.0 x 25 200 7,000 168,000 No.312114CWZ 12 x 1 1/4 6.0 x 30 200 7,000 168,000 No.312112CWZ 12 x 1 1/2 6.0 x 40 200 3,000 108,000 No.300122CWZ 12 x 2 6.0 x 50 200 3,200 76,800 No.312212CWZ 12 x 2 1/2 6.0 x 60 200 3,200 76,800 No.300123CWZ 12 x 3 6.0 x 75 200 2,400 57,600 No.300123CWZ100 12 x 3 6.0 x 75 100 1,500 54,000 No.312312CWZ 12 x 3 1/2 6.0 x 90 100 1,500 54,000 No.300124CWZ 12 x 4 6.0 x 100 100 1,500 54,000 No.3
Note: Available in multiples of 1,000 pieces for CWZ, CRWZTIMbag
See Page 59
Technical Data
To BS EN ISO 14592:2008
The TIMco Twin Threaded woodscrews carry the mark in compliance with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
18
TWIN
- THREA
DED
WO
OD
SCREWS
CertainHardwood
Softwood
Materials
Blackjax™ - Cross-Recess Roundhead
Twin Threaded - Cross-Recess Roundhead
Note: Available in box quantities
TIMco Code
Size (Imperial)
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00658BJC 6 x 5/8 3.5 x 16 200 28,000 1,008,000 No.200634BJC 6 x 3/4 3.5 x 20 200 15,000 360,000 No.200061BJC 6 x 1 3.5 x 25 200 15,000 360,000 No.200858BJC 8 x 5/8 4.0 x 16 200 15,000 360,000 No.200834BJC 8 x 3/4 4.0 x 20 200 10,000 240,000 No.200081BJC 8 x 1 4.0 x 25 200 7,000 168,000 No.208114BJC 8 x 1 1/4 4.0 x 30 200 7,000 168,000 No.208112BJC 8 x 1 1/2 4.0 x 40 200 7,000 168,000 No.200082BJC 8 x 2 4.0 x 50 200 3,000 108,000 No.200101BJC 10 x 1 5.0 x 25 200 7,000 168,000 No.210114BJC 10 x 1 1/4 5.0 x 30 200 7,000 168,000 No.210112BJC 10 x 1 1/2 5.0 x 40 200 3,000 108,000 No.200102BJC 10 x 2 5.0 x 50 200 3,000 108,000 No.2
TIMco Code
Size (Imperial)
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00412CRWZ 4 x1/2 3.0 x 12 200 28,000 1,008,000 No.100458CRWZ 4 x 5/8 3.0 x 16 200 28,000 1,008,000 No.100612CRWZ 6 x 1/2 3.5 x 12 200 28,000 1,008,000 No.200658CRWZ 6 x 5/8 3.5 x 16 200 28,000 1,008,000 No.200634CRWZ 6 x 3/4 3.5 x 20 200 15,000 360,000 No.200061CRWZ 6 x 1 3.5 x 25 200 15,000 360,000 No.206114CRWZ 6 x 1 1/4 3.5 x 30 200 10,000 240,000 No.200812CRWZ 8 x 1/2 4.0 x 12 200 15,000 360,000 No.200858CRWZ 8 x 5/8 4.0 x 16 200 15,000 360,000 No.200834CRWZ 8 x 3/4 4.0 x 20 200 10,000 240,000 No.200081CRWZ 8 x 1 4.0 x 25 200 7,000 168,000 No.208114CRWZ 8 x 1 1/4 4.0 x 30 200 7,000 168,000 No.208112CRWZ 8 x 1 1/2 4.0 x 40 200 7,000 168,000 No.200082CRWZ 8 x 2 4.0 x 50 200 3,000 108,000 No.200101CRWZ 10 x 1 5.0 x 25 200 10,000 240,000 No.210114CRWZ 10 x 1 1/4 5.0 x 30 200 7,000 168,000 No.210112CRWZ 10 x 1 1/2 5.0 x 40 200 3,000 108,000 No.200102CRWZ 10 x 2 5.0 x 50 200 3,000 108,000 No.210212CRWZ 10 x 2 1/2 5.0 x 60 200 3,200 76,800 No.200103CRWZ 10 x 3 5.0 x 75 200 3,000 108,000 No.200121CRWZ 12 x 1 6.0 x 25 200 7,000 168,000 No.312112CRWZ 12 x 1 1/2 6.0 x 40 200 3,200 76,800 No.300122CRWZ 12 x 2 6.0 x 50 200 3,200 76,800 No.3
The best selling twin-threaded woodscrew. Over 7.3 billion sold to date.
TIMpack See Page 59
TIMco Code
Size (Imperial)
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00081CBW 8 x 1 4.0 x 25 200 10,000 240,000 No.208114CBW 8 x 1 1/4 4.0 x 30 200 10,000 240,000 No.200102CBW 10 x 2 5.0 x 50 200 3,000 108,000 No.210212CBW 10 x 2 1/2 5.0 x 60 200 3,200 76,800 No.2
Topbrass™ - Cross-Recess
Double countersunk reduces the likelihood of head shear
Parallel Shank to assist drive
Made from high-grade polished solid brass35° sabre point
allows penetration without the need
for pre-drilling
60° Twin-threads to reduce both
torque and potential for
recess damage
Key Features
19
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTO
PBRASS™
SOLID
BRASS W
OO
DSCREW
S
Smal
l Bag
Key Features Dome Head Mirror Screws (Chrome or Polished Brass)
TIMco Code Screw Size (Imp.)
Box Contents Type Box Qty
00081CMIR200 8 x 1 Screws, Washers, Dome Heads Chrome 20008114CMIR200 8 x 1 1/4 Screws, Washers, Dome Heads Chrome 20008112CMIR200 8 x 1 1/2 Screws, Washers, Dome Heads Chrome 20008114BMIR200 8 x 1 1/4 Screws, Washers, Dome Heads Polished Brass 20008112BMIR200 8 x 1 1/2 Screws, Washers, Dome Heads Polished Brass 20000082BMIR200 8 x 2 Screws, Washers, Dome Heads Polished Brass 200
Domes are made of solid brass and then either chrome plated or polished
Sold with rubber washer to protect the mirror from cracking
Plated in Zinc 3-5 microns
Key Features
• 25° Super Sharp (SS) point for ease of penetration
• Single coarse thread for extreme grip.
• Plated with black phosphateCarcass Screws Cross-Recess
TIMco Code
Size (Metric)
Size (Imperial equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
40033CARC 4.0 x 33 8 x 1 1/4 500 7,500 270,000 No.240045CARC 4.0 x 45 8 x 1 3/4 500 7,500 270,000 No.2
TIMbag See Page 59
Key Features
Mixed Trays - Assorted Sizes
TIMco Code
Description Tray Qty
Trays Per Carton
CLASSIC TRAY Zinc & Yellow Passivated 895 6STS TRAY Zinc Self Tappers 1305 6STST TRAY A2 Stainless Steel 895 6WOOD TRAY Zinc Twin-Threaded Woodscrews 1140 6
A2 Stainless Steel Mixed Tray - 895pcs
3.5 x 16mm200 pcs
4.0 x 30mm50 pcs
5.0 x 40mm30 pcs
4.0 x 40mm70 pcs
4.0 x 60mm50 pcs
4.0 x 25mm60 pcs
4.0 x 50mm60 pcs
5.0 x 60mm35 pcs
4.0 x 20mm100 pcs
3.5 x 30mm100 pcs
5.0 x 50mm40 pcs
3.5 x 25mm100 pcs
Twin Threaded Woodscrews Mixed Tray - 1140pcs
6 x 1⁄2”190 pcs
6 x 1⁄2”180 pcs
6 x 3⁄4”130 pcs
8 x 11⁄2”65 pcs
8 x 11⁄4”85 pcs
8 x 1”60 pcs
8 x 2”50 pcs
10 x 21⁄2”35 pcs
8 x 3⁄4”100 pcs
6 x 11⁄4”110 pcs
10 x 2”35 pcs
6 x 1”100 pcs
Classic® Mixed Tray - 895pcs
3.5 x 16mm200 pcs
4.0 x 30mm50 pcs
5.0 x 40mm30 pcs
4.0 x 40mm70 pcs
4.0 x 60mm50 pcs
4.0 x 25mm60 pcs
4.0 x 50mm60 pcs
5.0 x 60mm35 pcs
4.0 x 20mm100 pcs
3.5 x 30mm100 pcs
5.0 x 50mm40 pcs
3.5 x 25mm100 pcs
Self-Tapping Screws Mixed Tray - 1305pcs
6 x 3⁄4”140 pcs
8 x 1⁄2”100 pcs
6 x 11⁄4”50 pcs
8 x 1”100 pcs
8 x 1⁄2”180 pcs
6 x 1⁄2”165 pcs
8 x 3⁄4”140 pcs
8 x 3⁄4”115 pcs
8 x 11⁄2”45 pcs
8 x 1”80 pcs
10 x 1⁄2”120 pcs
10 x 5⁄8”70 pcs
• An assortment of popular sizes (see below)
• Stored in separate compartments within a handy plastic case
• Sold in a counter top display
20
CA
RCA
SS SCREWM
IRROR SCREW
SM
IXED
TRAYS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Key Features
• A boxed assortment of popular sizes sold together for your convenience.
Mixed Packs - Assorted Sizes
TIMco Code Description Pack Qty (Assorted Sizes)
SOLOMP Solo Chipboard Screws 1400CLAFMP Classic Multi-Purpose Screws 1400CWZMP Twin-Threaded Woodscrews 1400
Key Features
• Two-piece construction with click-on action for ease of installation
• Plastic construction for durability in both internal and external applications
Plastidome Screw Caps
TIMco Code Screw Size (Imp.) Finish Pack Qty Packs Per Carton
WHITE PLAST 6, 8 White 100 10CHROME PLAST 6, 8 Chrome 100 10BLACK PLAST 6, 8 Black 100 10BROWN PLAST 6, 8 Brown 100 10
Size (mm) Qty
8 x 1 2008 x 11∕4 2008 x 11∕2 2008 x 2 2008 x 21∕2 20010 x 11∕2 10010 x 2 10010 x 3 10010 x 4 100
Woodscrew Pack Contents
Size (mm) Qty
3.5 x 25 2004.0 x 30 2004.0 x 40 2004.0 x 50 2005.0 x 50 2005.0 x 60 1005.0 x 70 1005.0 x 80 1005.0 x 100 100
Solo Pack Contents
Size (mm) Qty
3.5 x 25 2004.0 x 30 2004.0 x 40 2004.0 x 50 2005.0 x 50 2005.0 x 60 1005.0 x 70 1005.0 x 80 1005.0 x 100 100
Classic® Pack Contents
SCREW C
APS
MIX
ED PA
CKS
21
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Organic GreenTubs - Include Free Driver Bit
Organic BrownTubs - Include Free Driver Bit
A2 Stainless SteelTubs - Include Free Driver Bit
TIMco Code Size (Metric)
Size (Imp equiv.)
Thread Length (mm)
Tub Qty
Carton Qty
Pallet Qty
50DEX250 4.5 x 50 9 x 2 33 250 1,000 10800065DEX250 4.5 x 65 9 x 2 1/2 42 250 1,000 10800075DEX250 4.5 x 75 9 x 3 50 250 1,000 7200050DEX500 4.5 x 50 9 x 2 33 500 1,000 10000065DEX500 4.5 x 65 9 x 2 1/2 42 500 1,000 10000075DEX500 4.5 x 75 9 x 3 50 500 1,000 10000065DEX1000 4.5 x 65 9 x 2 1/2 42 1,000 1,000 72000
TIMco Code Size (Metric)
Size (Imp equiv.)
Thread Length (mm)
Tub Qty
Carton Qty
Pallet Qty
50DEXB250 4.5 x 50 9 x 2 33 250 1,000 10800065DEXB250 4.5 x 65 9 x 2 1/2 42 250 1,000 10800075DEXB250 4.5 x 75 9 x 3 50 250 1,000 7200050DEXB500 4.5 x 50 9 x 2 33 500 1,000 10000065DEXB500 4.5 x 65 9 x 2 5/8 42 500 1,000 10000075DEXB500 4.5 x 75 9 x 3 50 500 1,000 10000065DEXB1000 4.5 x 65 9 x 2 5/8 42 1,000 1,000 72000
TIMco Code Size (Metric)
Size (Imp equiv.)
Thread Length
(mm)
Pilot Hole 0
(mm)
Tub Qty
Carton Qty
Pallet Qty
50DEXSS250 4.5 x 50 9 x 2 33 2.5 250 1,000 10800065DEXSS250 4.5 x 65 9 x 2 5/8 42 2.5 250 1,000 10800075DEXSS250 4.5 x 75 9 x 3 50 2.5 250 1,000 7200050DEXSS500 4.5 x 50 9 x 2 33 2.5 500 1,000 10000065DEXSS500 4.5 x 65 9 x 2 5/8 42 2.5 500 1,000 10000075DEXSS500 4.5 x 75 9 x 3 50 2.5 500 1,000 100000
PATENTED CORROSION RESISTANT
PLATING FOR EXTERNAL
APPLICATIONS
Designed for the Construction of Decking Platforms
DECKING SCREWS
TIMBER, DECKING & EXTERNAL SCREWS
Cross-Recess No.2
Type 17 Slash for low torque and reduced timber splitting at low edge distances
Made from A2 Austenitic Stainless
Steel to achieve optimum corrosion
resistance
WARNING Stainless Steel In-Dex™ decking screws must be used where there is a corrosive environment and/or where the base material has inherent corrosive characteristics e.g. Green Oak
A pilot hole is recommended to be used for stainless steel
25° Sharp Point for easier penetration
into all wood types
40° Deep Single Thread
to provide a secure fixing with high
pull-out resistance
Plating:Organic GreenOrganic Brown
A2 Stainless Steel to withstand up to
1,000 (min) hours salt spray resistance
Helix to help clean the
hole of debris
Partially Threaded to increase clamping
effectiveness
Reduced Head Diameter
to fit in grooves of decking
Double Countersunk to assist
self-countersinking
STAINLESS STEEL
TIMbag See Page 60
Note: Available in multiples of 1,000 pieces (Stainless sold in tub quantities)
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
22
In-Dex™ Timber Screws Hex Head
In-Dex™ Timber Screws Hex HeadStainless Steel (A4 - 316) - Packaged In Telescopic Tubes
In-Dex™ Timber Screws Wafer Head
In-Dex™ Timber Screws Wafer HeadA2 Stainless Steel - Boxes Include Free Torx Driver
TIMco Code Size (Metric) A/F (mm) Box Qty Carton Qty
60IN 6.7 x 60 8 50 1,75075IN 6.7 x 75 8 50 1,75087IN 6.7 x 87 8 50 1,750100IN 6.7 x 100 8 50 1,750125IN 6.7 x 125 8 50 750150IN 6.7 x 150 8 50 900200IN 6.7 x 200 8 50 450250IN 6.7 x 250 8 50 450
TIMco Code Size (Metric) A/F (mm) Pilot Hole 0 (mm) Tube Qty Carton Qty
75INDEXSST 6.7 x 75 8 4.5 - 5.0* 25 675100INDEXSST 6.7 x 100 8 4.5 - 5.0* 25 450125INDEXSST 6.7 x 125 8 4.5 - 5.0* 25 375150INDEXSST 6.7 x 150 8 4.5 - 5.0* 25 375
TIMco Code Size (Metric) Bit Type Box Qty Carton Qty
95INW 6.7 x 95 T30 50 750125INW 6.7 x 125 T30 50 750150INW 6.7 x 150 T30 50 900175INW 6.7 x 175 T30 50 900200INW 8.0 x 200 T40 50 300 225INW 8.0 x 225 T40 50 300 250INW 8.0 x 250 T40 50 300 275INW 8.0 x 275 T40 25 225 300INW 8.0 x 300 T40 25 225 350INW 8.0 x 350 T40 25 225 400INW 8.0 x 400 T40 25 225
TIMco Code Size (Metric) Bit Type Pilot Hole 0 (mm) Box Qty Carton Qty
80INDEXWSS 8.0 x 80 T40 5.5 25 600
PATENTED CORROSION
RESISTANT PLATING FOR EXTERNAL APPLICATIONS
FASTENERSCONFORM TO
BS EN 1002 - 1:2001
BS 5268 - 2:2002
& BS 1210
Available in 8mm hex head
countersunk with a fixed washer or wafer head with
T30/T40 recess
Made from A4 marine grade Stainless Steel
Made from A2 Austenitic Stainless
Steel
WARNING Stainless Steel must be used where there is a corrosive environment and/or where the base material has inherent corrosive characteristics e.g. Green Oak
A pilot hole is recommended to be used for Stainless Steel.
25° Sharp Point for easier penetration
into all wood types
Type 17 Slash to reduce torque
and the likelihood of the timber
splitting when the screw is inserted
close to the edge
50° Deep Single Thread
to provide secure fixing with high
pull-out resistance
Plating:• Olive Green
• A4 Stainless Steel to withstand up to
1,000 hours (min) salt spray resistance
Patented Molecular Lubrication to increase
insertion speed.
* Depending on wood hardness.
STAINLESS STEEL
Note: Sold in box or tube quantities
Driver Bits & Socket drivers available seperatly see pg 100 - 101
To BS EN ISO 14592:2008
The TIMco timber, decking and external screws
carry the mark in compliance with the Construction Products
Regulations (Eurocode 5 EN1995-1-1)TIMbag See Page 60
Designed for Decking, Stairs, Fencing, Roofing and Landscaping
TIMBER SCREWS
23
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
PATENTED CORROSION RESISTANT PLATING FOR EXTERNAL APPLICATIONS
TIMco Code Thread 0 x Length (mm)
A/F (mm) Bag Qty
Carton Qty
Pallet Qty
640INCSB 6 x 40 10 10 800 28,800
650INCSB 6 x 50 10 10 700 25,200
675INCSB 6 x 75 10 10 700 25,200
850INCSB 8 x 50 13 10 700 25,200
875INCSB 8 x 75 13 10 500 18,000
8100INCSB 8 x 100 13 10 500 18,000
8120INCSB 8 x 120 13 10 300 10,800
10100INCSB 10 x 100 17 10 300 10,800
10130INCSB 10 x 130 17 10 250 9,000
10150INCSB 10 x 150 17 10 250 9,000
TIMco Exterior Coach Screws - DIN 571
TIMco Exterior Carriage Bolts DIN603 and Hexagonal Nut DIN934
TIMco Code Thread 0 x Length (mm)
Nut Size
A/F Nut (mm)
Bag Qty
Carton Qty
Pallet Qty
10100INCB 10 x 100 M10 17 10 100 10,000
10150INCB 10 x 150 M10 17 10 60 6,000
10160INCB 10 x 160 M10 17 10 60 6,000
10200INCB 10 x 200 M10 17 10 60 6,000
10220INCB 10 x 220 M10 17 10 50 6,000
A hexagon head woodscrew mostly used in wood and nylon plugs.
Conforms to DIN 571 standard Patented
Molecular Lubrication to increase insertion speed.
Domed top and a square under the head. The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened
Conforms to DIN603 (Carriage Bolt)
DIN934 (Hexagon Nut) standards
Plating:Olive Green
to withstand up to 500 hours (min) salt
spray resistance
Plating:Olive Green
to withstand up to 500 hours (min) salt
spray resistance
Patented Molecular Lubrication to increase insertion speed.
TIMBER, DECKING & EXTERNAL SCREWS
EXTERIOR COACH SCREWS Designed for Roofing and Landscaping
EXTERIOR CARRIAGE BOLTSDesigned for Fencing, Roofing and Landscaping
PATENTED CORROSION RESISTANT
PLATING FOR EXTERNAL
APPLICATIONS
To BS EN ISO 14592:2008
The TIMco timber, decking and external screws
carry the mark in compliance with the Construction Products
Regulations (Eurocode 5 EN1995-1-1)
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
24
Features
FEATURES• Manufactured to JIS B1125 (1995) and independently
tested to IFI specification ASTM C1002-89
• 25° ‘Super Sharp’ (SS) point for ease of penetration
• 60° thread
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Made from C10-18 Steel
• Plated in either zinc or black phosphate to withstand 50 hours salt spray test
• Full batch-traceability to the original steel mill certificate.
• Designed to pierce and drill into 0.9mm of metal channel. For larger gauge channel, self-drilling drywall screws are recommended
• Fully threaded up to 50mm, partially threaded thereafter
TECHNICAL INFORMATION All Drywall fastenings should be driven straight and the heads should be set slightly below the plane of the surface. Once inserted the screw should be sealed and taped to avoid any contact with wet plaster or plasterboard lime.
Phillips Bugle Head - Fine Thread (Black)
High Performance Dense Board Screw - High / Low Thread
Phillips Bugle Head - Fine Thread (Zinc)
Phillips Bugle Head - Reverse Thread (Black)
Phillips Bugle Head - Fine Thread (Black) Boxed 200’s
Phillips Bugle Head - Coarse Thread (Black)
TIMco Code
Size (Metric)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00025DRY 3.5 x 25 1,000 16,000 384,000 No.200032DRY 3.5 x 32 1,000 12,000 324,000 No.200038DRY 3.5 x 38 1,000 12,000 288,000 No.200042DRY 3.5 x 42 1,000 9,000 216,000 No.200045DRY 3.5 x 45 1,000 8,000 192,000 No.200050DRY 3.5 x 50 1,000 6,000 144,000 No.200055DRY 3.5 x 55 500 6,000 144,000 No.200060DRY 3.5 x 60 500 6,000 144,000 No.200065DRY 4.2 x 65 500 4,000 96,000 No.200075DRY 4.2 x 75 500 4,000 96,000 No.200090DRY 4.8 x 90 500 3,000 72,000 No.200100DRY* 4.8 x 100 500 3,000 72,000 No.2
TIMco Code
Size (Metric)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00022DRYD 3.9 x 22 1,000 16,000 384,000 No.200030DRYD 3.9 x 30 1,000 12,000 288,000 No.200045DRYD 3.9 x 45 1,000 8,000 192,000 No.200055DRYD 3.9 x 55 1,000 6,000 144,000 No.2
00025DRYZ 3.5 x 25 1,000 16,000 384,000 No.200032DRYZ 3.5 x 32 1,000 12,000 324,000 No.200038DRYZ 3.5 x 38 1,000 12,000 288,000 No.200042DRYZ 3.5 x 42 1,000 8,000 192,000 No.200045DRYZ 3.5 x 45 1,000 8,000 192,000 No.200050DRYZ 3.5 x 50 1,000 6,000 144,000 No.200055DRYZ 3.5 x 55 500 6,000 144,000 No.200060DRYZ 3.5 x 60 500 6,000 144,000 No.200065DRYZ 4.2 x 65 500 4,000 96,000 No.200075DRYZ 4.2 x 75 500 4,000 96,000 No.200090DRYZ 4.8 x 90 500 3,000 72,000 No.200100DRYZ* 4.8 x 100 500 3,000 72,000 No.200125DRYZ* 4.8 x 125 100 1,800 43,200 No.200150DRYZ* 4.8 x 150 100 1,800 43,200 No.2
00025DRYR 3.5 x 25 1,000 16,000 384,000 No.200038DRYR 3.5 x 38 1,000 12,000 288,000 No.200042DRYR 3.5 x 42 1,000 8,000 192,000 No.2
00025DRYS 3.5 x 25 200 15,000 360,000 No.200032DRYS 3.5 x 32 200 10,000 240,000 No.200038DRYS 3.5 x 38 200 7,000 168,000 No.200042DRYS 3.5 x 42 200 7,000 168,000 No.200045DRYS 3.5 x 45 200 7,000 168,000 No.200050DRYS 3.5 x 50 200 7,000 168,000 No.200060DRYS 3.5 x 60 200 3,000 108,000 No.200065DRYS 4.2 x 65 200 3,200 76,800 No.200075DRYS 4.2 x 75 200 3,200 76,800 No.200100DRYS* 4.8 x 100 200 3,200 76,800 No.2
00025DRYC 3.5 x 25 1,000 16,000 384,000 No.200032DRYC 3.5 x 32 1,000 12,000 324,000 No.200035DRYC 3.5 x 35 1,000 12,000 288,000 No.200038DRYC 3.5 x 38 1,000 12,000 288,000 No.200042DRYC 3.5 x 42 1,000 8,000 192,000 No.200050DRYC 3.5 x 50 1,000 6,000 144,000 No.200065DRYC 4.2 x 65 500 4,000 96,000 No.200075DRYC 4.2 x 75 500 4,000 96,000 No.200100DRYC 4.8 x 100 500 3,000 72,000 No.2
Free: Phillips No.2 driver bit (25mm) in each box of 1,000/500 pcs (not 200’s)
The TIMco range of premium quality drywall screws carry the mark in compliance with the Construction Products Regulations (European Regulation No. 305/2011) To BS EN ISO 14566:2008
Note: Minimum order quantity of 1,000 pieces *Available in box quantities
TIMbag See Page 59
25
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieD
RYW
ALL SCREW
S
TIMco Code
Size (metric)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Max Drill Thickness
(mm)
00025PSDD 3.5 x 25 1,000 16,000 384,000 No.2 2.500032PSDD 3.5 x 32 1,000 12,000 324,000 No.2 2.500038PSDD 3.5 x 38 1,000 12,000 288,000 No.2 2.500042PSDD 3.5 x 42 1,000 8,000 192,000 No.2 2.500050PSDD 3.5 x 50 1,000 6,000 144,000 No.2 2.500055PSDD 3.5 x 55 500 6,000 144,000 No.2 2.500065PSDD 3.9 x 65 500 6,000 144,000 No.2 2.500075PSDD 4.2 x 75 500 4,000 96,000 No.2 2.500100PSDD* 4.8 x 100 500 3,000 72,000 No.2 3.000125PSDD* 4.8 x 125 100 1,200 28,800 No.2 3.0
NB: for additional gauges lookat Cill Screws on page 35
Phillips Bugle Head - Self Drill (Zinc)
TIMco Code
Size (Imperial)
Size (Metric equiv)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Max Drill Thickness
(mm)
08916WHSD 8 x 9/16 4.2 x 13.5 1,000 12,000 288,000 No.2 2.500016WHSD 8 x 5/8 4.2 x 16 1,000 12,000 288,000 No.2 2.500019WHSD 8 x 3/4 4.2 x 19 1,000 12,000 288,000 No.2 2.500025WHSD 8 x 1 4.2 x 25 1,000 12,000 288,000 No.2 2.5
08916WHSP 8 x 9/16 4.2 x 13.5 1,000 12,000 288,000 No.2 0.9
Phillips Wafer Head - Self Drill (Zinc)
Phillips Wafer Head - Sharp Point (Zinc)
Phillips Bugle Head - Fine Thread (Zinc)
Phillips Bugle Head - Self Drilling (Zinc)
TIMco Code
Size (Metric)
Box/Tub Qty
Carton Qty
Pallet Qty
Driver Bit Size
00025COLDYS 3.5 x 25 1,000 10,000 320,000 No.200032COLDYS 3.5 x 32 1,000 10,000 320,000 No.200035COLDYS 3.5 x 35 1,000 10,000 320,000 No.200038COLDYS 3.5 x 38 1,000 10,000 240,000 No.200045COLDYS 3.5 x 45 1,000 10,000 240,000 No.200050COLDYS 3.5 x 50 1,000 10,000 240,000 No.200055COLDYS 3.5 x 55 1,000 10,000 160,000 No.200065COLDYS 4.2 x 65 500 5,000 120,000 No.200075COLDYS 4.2 x 75 500 5,000 120,000 No.2
TIMco Code
Size (Metric)
Tub Qty
Carton Qty
Pallet Qty
Driver Bit Size
00035CDRYTUB 3.5 x 35 1,000 6,000 144,000 No.200038CDRYTUB 3.5 x 38 1,000 6,000 144,000 No.200045CDRYTUB 3.5 x 45 1,000 6,000 144,000 No.200055CDRYTUB 3.5 x 55 800 4,800 115,200 No.2
00025COLDZYS 3.5 x 25 1,000 10,000 320,000 No.200032COLDZYS 3.5 x 32 1,000 10,000 320,000 No.200035COLDZYS 3.5 x 35 1,000 10,000 320,000 No.200038COLDZYS 3.5 x 38 1,000 10,000 240,000 No.200042COLDZYS 3.5 x 42 1,000 10,000 240,000 No.200050COLDZYS 3.5 x 50 1,000 10,000 240,000 No.200055COLDZYS 3.5 x 55 1,000 10,000 240,000 No.2
00035COLLSD 3.5 x 35 1,000 10,000 320,000 No.200045COLLSD 3.5 x 45 1,000 10,000 240,000 No.200050COLLSD 3.5 x 50 1,000 10,000 240,000 No.2
Phillips Wing Tip Self - Drilling
Classic A2 Stainless Steel Screws Cross-Recess Double Countersunk
TIMco Code
Size (Metric)
Plating Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00044COLLW 4.8 x 44 Ruspert 1,000 10,000 240,000 No.24865COLLW 4.8 x 65 Zinc 1,000 5,000 120,000 No.2
4040CLASSCOL 4.0 x 40 A2 SS 1,000 10,000 240,000 No.24050CLASSCOL 4.0 x 50 A2 SS 1,000 10,000 240,000 No.2
00055COLLF 4.2 x 55 1,000 8,000 192,000 No.2
Phillips Countersunk Flooring Screws (Zinc & Yellow Passivated)
Phillips Bugle Head - Coarse Thread (Black)
Phillips Bugle Head - Coarse Thread (Black)
Collated Screws Specifically designed to be compatible with all leading power tools brands.
To BS EN ISO 14566:2008
All above are available in tub quantities
All above are available in carton qty
TIMbag See Page 59 Free: No.2 Driver bit
ASSORTED
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
26
SELF DRILL D
RYW
ALL SCREW
SCO
LLATED SCREW
S
26
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Available in TIMbag
TIMbag Code Size x Length (mm)
Bag Qty
MF650B 6 x 50 64MF860B 8 x 60 30MF875B 8 x 75 26MF8100B 8 x 100 20MF1060B 10 x 60 18MF1075B 10 x 75 14MF10100B 10 x 100 12MF10150B 10 x 150 8MF1275B 12 x 75 12MF12100B 12 x 100 8MF12130B 12 x 130 6MF12150B 12 x 150 6
FLAT PACKERSPACKED IN 200’s containing the 6 most common sizes
Correct Weight
Distribution
EnsuresSquareness
ASSORTED
20 x 1mm (Yellow),
20 x 2mm (Green),
20 x 3mm (Blue)
20 x 4mm (Red),
10 x 5mm (Brown),
10 x 6mm (Black)
20 x 1mm (Yellow),
20 x 2mm (Green),
20 x 3mm (Blue)
20 x 4mm (Red),
10 x 5mm (Brown),
10 x 6mm (Black)
SMALL (45 x 35mm)
LARGE (100 x 50mm)
TIMco Code:
SHIMPack Includes:
30 x 1mm (Green),
40 x 2mm (Black),
50 x 3mm (White)
20 x 4mm (Grey),
20 x 5mm (Blue),
40 x 6mm (Red)FLAT PACKERS (100 x 28mm)
Pack Includes:
TIMco Code:
PACKER
POLYPROPYLENE material
WATERPROOFResistant to weather changes and
PACKERS
SHIMS
SHIMSPACKED IN 200’s containing the 6 most common sizes
EASY Levelling of:
ASSORTED
BattensDry Lining
Stud WorkDoor Frames
Window Frames
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
27
SHIM
S & FLAT PA
CKERS
Self-Tapping Screws
Key Features
• Designed and manufactured to BS 4174
• Case hardened to prevent both shearing under load and resistance to excess torque pressure
• Plated in Trivalent Chromium (CR3) zinc 3 microns
• 60° self-tapping thread for ease of insertion
Please call TIMco technical support for recommended hole size in sheet metal.
Pan Cross-Rec AB
Countersunk Cross-Rec AB
Flange Cross - Rec AB - Black
TIMco Code
Size (Imperial)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00214CPAZ 2 x 1/4 1,000 75,000 2,700,000 No.102516CPAZ 2 x 5/16 1,000 75,000 2,700,000 No.100438CPAZ 4 x 3/8 1,000 50,000 1,200,000 No.100412CPAZ 4 x 1/2 1,000 35,000 840,000 No.100614CPAZ 6 x 1/4 1,000 50,000 1,200,000 No.200638CPAZ 6 x 3/8 1,000 35,000 840,000 No.200612CPAZ 6 x 1/2 1,000 15,000 540,000 No.200658CPAZ 6 x 5/8 1,000 15,000 540,000 No.200634CPAZ 6 x 3/4 1,000 15,000 540,000 No.200061CPAZ 6 x 1 1,000 12,000 324,000 No.200838CPAZ 8 x 3/8 1,000 15,000 540,000 No.200812CPAZ 8 x 1/2 1,000 15,000 540,000 No.200858CPAZ 8 x 5/8 1,000 16,000 384,000 No.200834CPAZ 8 x 3/4 1,000 16,000 384,000 No.200081CPAZ 8 x 1 1,000 12,000 288,000 No.208114CPAZ 8 x 1 1/4 1,000 8,000 192,000 No.208112CPAZ 8 x 1 1/2 1,000 6,000 144,000 No.200082CPAZ 8 x 2 500 4,000 96,000 No.201012CPAZ 10 x 1/2 1,000 16,000 384,000 No.201058CPAZ 10 x 5/8 1,000 12,000 324,000 No.201034CPAZ 10 x 3/4 1,000 12,000 324,000 No.200101CPAZ 10 x 1 1,000 8,000 192,000 No.210114CPAZ 10 x 1 1/4 1,000 8,000 192,000 No.210112CPAZ 10 x 1 1/2 500 4,000 96,000 No.200102CPAZ 10 x 2 500 3,000 72,000 No.201212CPAZ 12 x 1/2 500 8,000 192,000 No.300121CPAZ 12 x 1 1,000 6,000 144,000 No.312112CPAZ 12 x 1 1/2 500 3,000 72,000 No.301434CPAZ 14 x 3/4 1,000 6,000 144,000 No.3
TIMco Code
Size (Imperial)
Box Qty
Carton Qty
Pallet Qty
Driver Bit Size
00438CCAZ 4 x 3/8 1,000 50,000 1,200,000 No.100434CCAZ 4 x 3/4 1,000 35,000 840,000 No.100612CCAZ 6 x 1/2 1,000 15,000 540,000 No.200658CCAZ 6 x 5/8 1,000 15,000 540,000 No.200634CCAZ 6 x 3/4 1,000 15,000 540,000 No.200061CCAZ 6 x 1 1,000 12,000 324,000 No.206114CCAZ 6 x 1 1/4 1,000 12,000 288,000 No.206112CCAZ 6 x 1 1/2 1,000 8,000 192,000 No.200838CCAZ 8 x 3/8 1,000 35,000 840,000 No.200812CCAZ 8 x 1/2 1,000 15,000 540,000 No.200858CCAZ 8 x 5/8 1,000 16,000 384,000 No.200834CCAZ 8 x 3/4 1,000 16,000 384,000 No.200081CCAZ 8 x 1 1,000 12,000 288,000 No.208114CCAZ 8 x 1 1/4 1,000 8,000 192,000 No.208112CCAZ 8 x 1 1/2 1,000 6,000 144,000 No.208134CCAZ 8 x 1 3/4 500 6,000 162,000 No.200082CCAZ 8 x 2 500 4,000 96,000 No.201034CCAZ 10 x 3/4 1,000 12,000 324,000 No.200101CCAZ 10 x 1 1,000 8,000 192,000 No.210114CCAZ 10 x 1 1/4 1,000 8,000 192,000 No.210112CCAZ 10 x 1 1/2 500 4,000 96,000 No.200102CCAZ 10 x 2 500 3,000 72,000 No.212112CCAZ 12 x 1 1/2 500 3,000 72,000 No.3
00061CFAB 6 x 1 1,000 12,000 324,000 No.200812CFAB 8 x 1/2 1,000 15,000 540,000 No.201034CFAB 10 x 3/4 1,000 12,000 324,000 No.2
Flange Cross - Rec AB
00612CFAZ 6 x 1/2 1,000 15,000 540,000 No.200634CFAZ 6 x 3/4 1,000 15,000 540,000 No.200838CFAZ 8 x 3/8 1,000 15,000 540,000 No.200812CFAZ 8 x 1/2 1,000 15,000 540,000 No.200858CFAZ 8 x 5/8 1,000 16,000 384,000 No.200834CFAZ 8 x 3/4 1,000 16,000 384,000 No.200081CFAZ 8 x 1 1,000 12,000 288,000 No.208114CFAZ 8 x 1 1/4 1,000 8,000 192,000 No.201034CFAZ 10 x 3/4 1,000 12,000 324,000 No.2
To comply with restrictions of hazardous substances in electrical and electronic equipment (ROHS) directive (2002/95/EC) and the waste electrical and electronic equipment (WEEE) directive (2002/96/EC) all TIMco self-tapping screws are plated with Trivalent Chromium (CR3) finishes.
TIMbag See Page 60
28
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
SELF-TAPPIN
G SCREW
S
28
Max
CT 6
.5m
m
Max
CT 3
.5 m
m
Max
CT 1
1.5m
m
Max
CT 5
mm
8 x 1/2ImperialSIZE
8 x 3/4 10 x 1/2 10 x 5/8
Max
CT 9
.5m
m
10 x 3/4
Max
CT 7
mm
12 x 3/4
Max
CT 1
3mm
12 x 1
Max
CT 1
9mm
12 x 1 1/4
Max
CT 2
6mm
12 x 1 1/2
Max
CT 3
3mm
12 x 1 3/44.2 x 13Metric 4.2 x 19 4.8 x 13 4.8 x 16 4.8 x 19 5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 45
Max
D
rillin
g Ca
paci
ty
2.5m
m
Max
Dril
ling
Capa
city
5m
m
NOTE: Drawings to size
8.5mmFixed
Washer1/4”
(6mm)
10mmFixed
Washer5/16”(8mm)
10.6mmFixed
Washer5/16”(8mm)
7mm
- D
rill T
ip
5mm
- D
rill T
ip
4.5m
m -
Dril
l Tip
Hex Head Washer Face Self-Drilling Screws - Zinc
TIMco Code
Size (Imperial)
Size (Metric equiv.)
Drill Point Size
Across The Flats
Size
Max Drill Thickness
(mm)
Box Qty
Carton Qty
Pallet Qty
00812HWSD 8 x 1/2 4.2 x 13 No.2 1/4” 2.5 1,000 16,000 384,000 00834HWSD 8 x 3/4 4.2 x 19 No.2 1/4” 2.5 1,000 16,000 384,000 01012HWSD 10 x 1/2 4.8 x 13 No.2 5/16” 3 1,000 16,000 384,000 01058HWSD 10 x 5/8 4.8 x 16 No.2 5/16” 3 1,000 12,000 288,000 01034HWSD 10 x 3/4 4.8 x 19 No.2 5/16” 3 1,000 12,000 288,000 01234HWSD 12 x 3/4 5.5 x 19 No.3 5/16” 5 500 8,000 192,000 00121HWSD 12 x 1 5.5 x 25 No.3 5/16” 5 500 6,000 144,000 12114HWSD 12 x 1 1/4 5.5 x 32 No.3 5/16” 5 500 6,000 144,000 12112HWSD 12 x 1 1/2 5.5 x 38 No.3 5/16” 5 500 6,000 144,000 12134HWSD 12 x 1 3/4 5.5 x 45 No.3 5/16” 5 500 4,000 96,000
To obtain approximate clamping thickness :
Take the drill tip + thread engagement, (8 gauge = 3mm) (10 gauge = 4mm) (12 gauge = 5mm) and subtract from total length of screw.
TIMco Roofing and General
Construction Screws
Cover Caps
Colour TIMco Code (0 16mm) TIMco Code (0 19 mm)
Black 1600E53CAP 1900E53CAP White 1600E55CAP 1900E55CAP Vandyke Brown - 1908B29CAP Goosewing Grey 1610A05CAP 1910A05CAP Olive Green 1612B27CAP - Juniper Green 1612B29CAP 1912B29CAP Merlin Grey - 1918B25CAP Raven/Slate Blue 1618B29CAP -
Note: Only available in multiples of 1,000 pieces. Please call sales for the full range of colours available.
EPDM Washer
TIMco Code
Washer 0 (mm)
Hole 0 (mm)
Washer Type Qty Per Bag
WG16 16 6.8 Galvanised Steel 100WG19 19 5.8 Galvanised Steel 100WA29 29 6.8 Aluminium 100
HEX
AG
ON
AL H
EAD
SELF - DRILLIN
G SCREW
S
29
EPDM
WA
SHER &
COV
ER CA
PS
Max
CT 3
7mm
Max
CT 3
3mm
Max
CT 2
4mm
Max
CT 2
2mm
Max
CT 1
9mm
Max
CT 1
6mm
Max
CT 1
2mm
Max
CT 9
mm
5.5 x 25SIZE 5.5 x 32 5.5 x 38 5.5 x 50 5.5 x 70
Max
CT 6
3mm
Max
CT 6
0mm
Max
CT 9
3mm
5.5 x 100
Max
CT 9
0mm
Max
Dril
ling
Capa
city
5m
m
NOTE: Drawings to size
12mmFixed
Washer
5/16”(8mm)
8mm
- D
rill T
ip
The TIMco Roofing and General Construction range has been specifically designed and manufactured to meet all the recognised industry standards and performance criteria.
To obtain MaxCT (approximate maximum clamping thickness):
Washered screws: Take the drill tip + thread engagement (5mm) + washer thickness (3mm) and subtract from total length of screw.
Non washered screws: Take the drill tip + thread engagement (5mm) and subtract from total length of screw.
Silver Ruspert Plating: Ruspert is a reliable and
durable corrosion resistant coating which resists over
1,000 hours salt-spray test to BSEN ISO 9227 2006 (UKAS Accredited).
Self-Drilling Screws For Light Section Steel (5mm)
TIMco Code
Size (Metric)
Drill Point Size
Washer Size (mm)
Max Drill Thickness
(mm)
Rec. RPM
Box Qty
Carton Qty
L25B 5.5 x 25 No.3 No Washer 5 1,800 100 3,500 L25W16B 5.5 x 25 No.3 16 5 1,800 100 1,500 L32B 5.5 x 32 No.3 No Washer 5 1,800 100 3,500 L32W16B 5.5 x 32 No.3 16 5 1,800 100 1,500 L38B 5.5 x 38 No.3 No Washer 5 1,800 100 3,500 L38W16B 5.5 x 38 No.3 16 5 1,800 100 1,500 L50B 5.5 x 50 No.3 No Washer 5 1,800 100 1,500 L50W16B 5.5 x 50 No.3 16 5 1,800 100 1,600 L70B 5.5 x 70 No.3 No Washer 5 1,800 100 1,600 L70W16B 5.5 x 70 No.3 16 5 1,800 100 1,200 L100B 5.5 x 100 No.3 No Washer 5 1,800 100 600 L100W16B 5.5 x 100 No.3 16 5 1,800 100 600
Stitching Screw For Light Section Steel
TIMco Code
Size (Metric)
Drill Point Size
Washer Size (mm)
Max Drill Thickness
(mm)
Rec. RPM
Box Qty
Carton Qty
S22W16B 6.3 x 22 No.2 reduced 16 1.7 2,500 100 3,500 S25W16B 6.3 x 25 No.2 reduced 16 1.7 2,500 100 3,500
Max CT = Maximum clamping thickness.
Max CT = Maximum clamping thickness.
Coarse self-tapping thread
Coarse self-tapping thread with tapered shank
NOTE: Drawings to size
12mmFixed
Washer
5/16”(8mm)
6.3 x 25SIZE
Max
CT 1
0mm
Max
Dril
ling
Capa
city
1.7
mm
TIMbag See Page 60
TIMbag See Page 60
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
ROO
FING
SCREWS - STITCH
ING
SCREWS &
SELF-DRILLIN
G SCREW
S FOR LIG
HT SEC
TION
STEEL
30
5.5 x 32SIZE 5.5 x 38 5.5 x 55 5.5 x 65 5.5 x 80 5.5 x 100
Max
CT 80
mm
Max
CT 57
mm
Max
CT 42
mm
Max
CT 35
mm
Max
CT 32
mm
Max
CT 18
mm
Max
CT 15
mm
Max
CT 77
mm
75mm thread length.
NOTE: Drawings to size
Max
Dril
ling
Capa
city
12m
m
12mmFixed
Washer
5/16”(8mm)
15m
m -
Dril
l Tip
Max
CT 16
mm
Max
CT 13
mm
Fine self-tapping metric thread
Self-Drilling Screws For Heavy Section Steel (12mm)
TIMco Code
Size (Metric)
Drill Point Size
Washer Size (mm)
Max Drill Thickness
(mm)
Max CT
(mm)
Rec. RPM
Box Qty
Carton Qty
H32B 5.5 x 32 No.5 No Washer 12 16 1,800 100 3,500 H32W16B 5.5 x 32 No.5 16 12 13 1,800 100 1,500 H38B 5.5 x 38 No.5 No Washer 12 18 1,800 100 3,500 H38W16B 5.5 x 38 No.5 16 12 15 1,800 100 1,500 H55B 5.5 x 55 No.5 No Washer 12 35 1,800 100 1,500 H55W16B 5.5 x 55 No.5 16 12 32 1,800 100 1,600 H65W16B 5.5 x 65 No.5 16 12 42 1,800 100 1,600 H80W16B 5.5 x 80 No.5 16 12 57 1,800 100 1,600 H100B 5.5 x 100 No.5 No Washer 12 80 1,800 100 1,600 H100W16B 5.5 x 100 No.5 16 12 77 1,800 100 1,200
Max CT = Maximum clamping thickness.
NOTE: Drawings to size
12mmFixed
Washer
5/16”(8mm)
SIZE 6.3 x 32 6.3 x 45 6.3 x 60 6.3 x 80
Max
FT 3
7mm
6.3 x 100 6.3 x 150
Max
FT 5
7mm
Max
FT 1
10m
m
Max
FT 0
.9m
m
Max
FT 5
mm
Max
FT 1
7mm
40m
m M
inim
um E
nbed
men
t Dep
th
Max FT = Maximum fixture thickness.
Coarse self-tapping thread
0.9mm Max Drilling Capacity for Steel
Slash Point Screw For Timber
TIMco Code
Size (Metric)
Washer Size (mm)
Box Qty
Carton Qty
DS32W16B 6.3 x 32 16 100 1,500 DS45W16B 6.3 x 45 16 100 1,500 DS45W19B 6.3 x 45 19 100 1,800 DS60W16B 6.3 x 60 16 100 1,800 DS60W19B 6.3 x 60 19 100 1,200 DS80W16B 6.3 x 80 16 100 1,200 DS100W16B 6.3 x100 16 100 800 DS150W16B 6.3 x 150 16 100 800
TIMbag See Page 60
TIMbag See Page 60
ROO
FING
SCREWS - SELF-D
RILLING
SCREWS FO
R HEAV
Y SECTIO
N STEEL &
DO
UB
LE SLASH
POIN
T FOR TIM
BER
31
Max
PT 7
8mm
Min
PT 6
5mm
Max
PT 9
6mm
SIZE 5.5/6.3 x 82 5.5/6.3 x 98 5.5/6.3 x 115
Max
Dril
ling
Capa
city
5m
m
NOTE: Drawings to size
12mmFixed
Washer
5/16”(8mm)
8mm
- D
rill T
ip
16mm
16mm 19mm
Max
PT 6
3mm
16mm
Self-Drilling Screws - Composite Panel/Light Section Steel (5mm)
TIMco Code
Size (Metric)
Drill Point Size
Washer Size (mm)
Max Drill Thickness
(mm)
Max PT
(mm)
Min PT
(mm)
Box Qty
Carton Qty
LH82W16B 5.5/6.3 x 82 No.3 16 5 63 32 100 1,200 LH98W16B 5.5/6.3 x 98 No.3 16 5 78 48 100 800 LH115W16B 5.5/6.3 x 115 No.3 16 5 95 65 100 800 LH115W19B 5.5/6.3 x 115 No.3 19 5 95 65 100 800
SIZE 5.5/6.3 x 125
16mm 19mm
NOTE: Drawings to size
Max
Dril
ling
Capa
city
12m
m
12mmFixed
Washer
5/16”(8mm)
Min
PT 6
8mm
Max
PT 8
9mm
Max PT = Approximate maximum panel thickness.Min PT = Approximate minimum panel thickness.
Coarse self-tapping thread
Fine Self-tapping metric thread with torque reducing flutes
Self-Drilling Screws - Composite Panel/Heavy Section Steel (12mm)
TIMco Code
Size (Metric)
Drill Point Size
Washer Size (mm)
Max Drill Thickness
(mm)
Max PT
(mm)
Min PT
(mm)
Box Qty
Carton Qty
HH125W19 5.5/6.3 x 125 No.5 19 12 88 68 50 800
Max PT = Approximate maximum panel thickness. Min PT = Approximate minimum panel thickness.
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
ROO
FING
SCREWS - CO
MPO
SITE PAN
EL FOR LIG
HT &
HEAV
Y SECTIO
N STEEL
32
SIZE 5.5 x 45 5.5 x 65 5.5 x 85 5.5 x 120
Max
Dril
ling
Capa
city
12m
m
NOTE: Drawings to size
Max
TT
- 29m
m
Max
TT
- 49m
m
Max
TT
- 84m
m
Max
TT
- 13m
m
No. 3Phillips
25m
m -
Dril
l Tip
(Inc.
Win
gs)
21m
m -
Dril
l Tip
(Inc.
Win
gs)
15m
m -
Dril
l Tip
(Inc.
Win
gs)
13m
m -
Dril
l Tip
(Inc.
Win
gs)
SIZE 4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100 5.5 x 130 5.5 x 150
Max
Dril
ling
Capa
city
4m
m
Max
Dril
ling
Capa
city
5m
m
NOTE: Drawings to size
App
rox.
M
ax T
T - 1
8mm
Max
FT
- 63
mm
Max
FT
- 78m
m
Max
FT
- 108
mm
Max
FT
- 128
mm
Max
FT
- 28m
m
Max
FT
- 43m
m
Phillips Recess Wing Tip Self-Drill Screws For Heavy Section Steel
Phillips Recess Wing Tip Self-Drill Screws For Light Section Steel
TIMco Code
Size (Metric)
Max Drill Thickness (mm)
Max FT (Fixture Thickness) (mm)
Driver Bit Size
Box Qty
Carton Qty
LW38B 4.8 x 38 4 18 No.2 200 3,000 LW50B 5.5 x 50 5 28 No.3 200 3,200 LW65B 5.5 x 65 5 43 No.3 200 2,400 LW85B 5.5 x 85 5 63 No.3 100 1,600 LW100B 5.5 x 100 5 78 No.3 100 1,600 LW130B 5.5 x 130 5 108 No.3 100 1,600 LW150B 5.5 x 150 5 128 No.3 100 1,200
TIMco Code
Size (Metric)
Max Drill Thickness (mm)
Max TT (Timber Thickness) (mm)
Driver Bit Size
Box Qty
Carton Qty
HW45B 5.5 x 45 12 13 No.3 200 3,200 HW65B 5.5 x 65 12 29 No.3 200 2,400 HW85B 5.5 x 85 12 49 No.3 100 1,600 HW120B 5.5 x 120 12 84 No.3 100 1,600
Fine self-tapping metric thread
6 ribs on countersink to assist completion of countersinking
Coarse self-tapping thread
6 ribs on countersink to assist completion of countersinking
Plated in zinc 3-5 microns
Plated in zinc 3-5 microns
Max FT = Approximate maximum fixture thickness (based on 12mm substrate steel).
Max FT = Approximate maximum fixture thickness (based on 4mm substrate steel for 4.8 gauge and 5mm substrate steel for 5.5 gauge).
TIMbag See Page 60
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieRO
OFIN
G SCREW
S - WIN
G TIP SELF-D
RILLING
FOR LIG
HT &
HEAV
Y SECTIO
N STEEL
33
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Key Features
Key Features
Key Features
For fixing steel to steel applications
• Zinc plated
• Made from C10-18 steel to ensure consistent quality
• Full batch-traceability to the original steel mill certificate
• Square Drive Pan Self-Drilling Screw include a free square driver bit
For fixing steel to steel applications
• Zinc plated to withstand 240 hours salt spray test.
• Made from C10-18 steel to ensure consistent quality
• Full batch-traceability to the original steel mill certificate
For fixing steel to steel applications
• Made from Martensitic 410 Stainless Steel
• Silver Ruspert plated to withstand over 500 hours salt spray test
• Full batch-traceability to the original steel mill certificate
For fixing steel to steel applications
• Made from C10-18 steel to ensure consistent quality
• Silver Ruspert plated to withstand over 500 hours salt spray test
• Full batch-traceability to the original steel mill certificate
• Free driver bit included
Phillips Low Profile Wafer Head Self-Drilling Screw - Silver Ruspert Coating
Phillips Low Profile Pancake Head Self-Drilling Screw - Silver Ruspert Coating
Phillips Low Profile Pan Head Self-Drilling Screw - Silver Ruspert Coating
Square Drive Pan Self-Drilling Screws
Phillips Pan Self-Drilling Screws
Phillips Pan Self-Drilling Screws
Stainless Steel Phillips Pan Self - Drilling Screws
TIMco Code
Size(Metric)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Drill Point Size
Max Drill Thickness
(mm)
LPW22 4.8 x 22 500 4,000 96,000 No.2 No.2 3
FP19 5.5 x 19 500 8,000 192,000 No.2 No.2 5FP26 5.5 x 26 500 8,000 192,000 No.2 No.2 5
LPP16 4.8 x 16 500 7,500 270,000 No.2 No.2 3
00812SPSD 8 x 1/2 4.2 x 13 1,000 15,000 540,000 No.2 No.2 2.5
TIMco Code
Size (Imp)
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Drill Point Size
Max Drill Thickness
(mm)
00658PPSD 6 x 5/8 3.5 x 16 1,000 15,000 540,000 No.2 No.2 2.500061PPSD 6 x 1 3.5 x 25 1,000 16,000 384,000 No.2 No.2 2.507716PPSD 7 x 7/16 3.9 x 11 1,000 15,000 540,000 No.2 No.2 2.500812PPSD 8 x 1/2 4.2 x 13 1,000 15,000 540,000 No.2 No.2 2.500834PPSD 8 x 3/4 4.2 x 19 1,000 16,000 384,000 No.2 No.2 2.500081PPSD 8 x 1 4.2 x 25 1,000 12,000 288,000 No.2 No.2 2.5
TIMco Code
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Drill Point Size
Max Drill Thickness
(mm)
130 Z 4.2 x 13 1,000 15,000 384,000 No.2 No.2 2.5131 Z 4.2 x 16 1,000 16,000 540,000 No.2 No.2 2.5132 Z 4.2 x 19 1,000 16,000 540,000 No.2 No.2 2.5133 Z 4.2 x 25 1,000 12,000 384,000 No.2 No.2 2.5
TIMco Code
Size (Metric equiv.)
Box Qty
Carton Qty
Pallet Qty
Driver Bit
Size
Drill Point Size
Max Drill Thickness
(mm)
130 SS 4.2 x 13 1,000 15,000 384,000 No.2 No.2 2.5131 SS 4.2 x 16 1,000 16,000 540,000 No.2 No.2 2.5132 SS 4.2 x 19 1,000 16,000 540,000 No.2 No.2 2.5133 SS 4.2 x 25 1,000 12,000 384,000 No.2 No.2 2.5
Key Features
META
L FRAM
ING
SCREWS &
PAN
HEA
D SELF-D
RILLING
SCREWS
34
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Reinforced Frame Screws Element ScrewsZinc 130 Z 131 Z 132 Z 133 Z
Stainless* 130 SS 131 SS 132 SS 133 SS
4.2 x 13B: 1,000
C: 15,0004.2 x 16
B: 1,000C: 16,000
4.2 x 19B: 1,000
C: 16,000 4.2 x 25B: 1,000
C: 12,000
Yellow 191 Y 192 Y 193 Y 194 Y
4.8 x 55B: 200
C: 3,000
4.8 x 65B: 200
C: 2,400
4.8 x 80B: 200
C: 2,400
4.8 x 95B: 200
C: 1,600
Head:Thread:Tip Design:
PanSelf-TappingSelf-Drilling
Head:Thread:Tip Design:
Shallow Pan CountersunkSelf-TappingAB Point
(B:) Box Qty (C:) Carton Qty
Weather Bar Screws
Zinc 241 Z
4.2 x 13B: 1,000
C: 12,000
Head:Thread:Tip Design:
NippleSelf-TappingSelf-Drilling
(B:) Box Qty (C:) Carton Qty
(B:) Box Qty (C:) Carton Qty
Baypole ScrewsZinc 289 Z 290 Z 291 Z 292 Z 293 Z 294 Z 295 Z
4.8 x 40B: 200
C: 3,000
4.8 x 50B: 200
C: 2,400
4.8 x 60B: 200
C: 2,400
4.8 x 70B: 200
C: 1,600
4.8 x 80B: 200
C: 2,400
4.8 x 90B: 200
C: 1,600
4.8 x 100B: 200
C: 2,400
Head:Thread:Tip Design:
Wafer FlangeSelf-Tapping with V-FluteSelf-Drilling
(B:) Box Qty (C:) Carton Qty
Machine screws - for fixing handles to backplateZinc 520 Z 530 Z 540 Z 545 Z 550 Z
M5 x 20B: 500
C: 7,500
M5 x 30B: 500
C: 4,000
M5 x 40B: 500
C: 4,000 M5 x 45B: 500
C: 4,000 M5 x 50B: 500
C: 4,000
Head:Thread:Tip Design:
CountersunkMetricB Point
(B:) Box Qty (C:) Carton Qty
* Martensitic 410 Stainless Steel
Cill ScrewsZinc 224 Z 225 Z 226 Z 227 Z
4.2 x 42B:500
C: 6,0004.2 x 50
B:500C: 4,000 4.2 x 55
B:500C: 4,000
4.2 x 65B:200
C: 2,400
Head:Thread:Tip Design:
BugleTwinSelf-Drilling
(B:) Box Qty (C:) Carton Qty
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
35
WIN
DO
W SCREW
S
200 RangeYellow 201 Y 202 Y 204 Y 205 Y 203 Y 206 Y 207 Y 208 Y 209 Y 210 Y
Zinc 201 Z 202 Z 204 Z 205 Z 203 Z 206 Z 207 Z 208 Z - 210 ZStainless* 201 SS 202 SS 204 SS 205 SS 203 SS 206 SS - 208 SS 209 SS -
4.3 x 16B: 1,000
C: 15,0004.3 x 20
B: 1,000C: 15,000 4.3 x 25
B: 1,000C: 12,000 4.3 x 30
B: 1,000C: 12,000 4.3 x 35
B: 1,000C: 8,000 4.3 x 40
B: 1,000C: 8,000 4.3 x 45
B: 500C: 6,000
4.3 x 55B: 500
C: 4,000
REPA
IR S
CREW
S FO
R ST
RIPP
ED H
OLE
S
4.8 x 25B: 1,000
C: 12,000
4.8 x 38B: 1,000C: 8,000
Head:Thread:Tip Design:
Shallow Countersunk with RibsSingle DeepGimlet
(B:) Box Qty (C:) Carton Qty
* Austenitic Stainless Steel
215 RangeZinc 215 Z 216 Z 217 Z 218 Z
Stainless* 215 SS 216 SS 217 SS 218 SS
4.8 x 16B: 1,000
C: 16,000 4.8 x 20B: 1,000
C: 16,000 4.8 x 25B: 1,000
C: 12,000 4.8 x 30B: 1,000C: 8,000
(B:) Box Qty (C:) Carton Qty
Head:Thread:Tip Design:
Shallow Pan with SerrationsSingle DeepGimlet * Austenitic Stainless Steel
100 RangeYellow - 104 Y 105 Y 106 Y 108 Y 109 Y
Zinc 102 Z 104 Z 105 Z 106 Z - 109 Z
4.3 x 20B: 1,000
C: 15,000 4.3 x 25B: 1,000
C: 12,000
4.3 x 30B: 1,000
C: 12,000
4.3 x 40B: 1,000C: 8,000
4.3 x 55B: 500
C: 4,000
REPA
IR S
CREW
S FO
R ST
RIPP
ED H
OLE
S
4.8 x 25B: 1,000
C: 12,000
111 RangeZinc 111 Z 112 Z
4.3 x 20B: 1,000
C: 16,000 4.3 x 25B: 1,000
C: 12,000
Head:Thread:Tip Design:
Shallow Pan CountersunkHigh/LowDouble Slash
(B:) Box Qty (C:) Carton Qty
211 Range
Zinc 213 Z 211 Z 212 ZStainless* 213 SS 211 SS 212 SS
4.3 x 16B: 1,000
C: 15,000 4.3 x 20B: 1,000
C: 16,000 4.3 x 25B: 1,000
C: 12,000(B:) Box Qty (C:) Carton Qty
* Austenitic Stainless Steel
Head:Thread:Tip Design:
Shallow Pan CountersunkSingle DeepGimlet
Friction Stay to PVC-u
Hardware to PVC-u and Plastic Reinforcement Retention
Unreinforced Friction Stay
Unreinforced
RECESS: Phillips No.2
CARBON STEEL Plating: Zinc / Yellow
SALT SPRAY 240 hrs
STAINLESS STEEL
SALT SPRAY 504 hrsAustenitic Screws
SALT SPRAY 504 hrs410 Martensitic Screws
(Silver Ruspert)
All tested to BS EN ISO 9227:2006
(UKAS Accredited). In accordance with BS7412 and both the BPF and GGF guidelines.
Head:Thread:Tip Design:
CountersunkHigh/LowDouble Slash
(B:) Box Qty (C:) Carton Qty
36
CARBO
N STEEL PVCu W
IND
OW
FABRICATIO
N SCREW
S FOR U
NREIN
FORCED
FRAM
ES
120 Range
Hardware to Reinforcement and Metal Reinforcement Retention
423 RangeYellow 120 Y# 121 Y# 122 Y# 123 Y - 124 Y 125 Y 127 Y
Zinc 120 Z# 121 Z# 122 Z# 123 Z 126Z 124 Z 125 Z 127 ZStainless* - 121 SS# 122 SS# 123 SS - 124 SS 125 SS -
3.9 x 13B: 1,000
C: 15,0003.9 x 16
B: 1,000C: 15,000
3.9 x 19B: 1,000
C: 15,000 3.9 x 25B: 1,000
C: 16,0003.9 x 29
B: 1,000C: 12,000
3.9 x 32B: 1,000C: 8,000 3.9 x 38
B: 1,000C: 8,000 3.9 x 45
B: 500C: 6,000
Zinc 423 Z 425 Z 427 Z
4.8 x 25B: 1,000
C: 12,000
4.8 x 38B: 500
C: 4,000 4.8 x 45B: 500
C: 4,000
Head:Thread:Tip Design:
Countersunk (# with ribs)Self-TappingSelf-Drilling
(B:) Box Qty (C:) Carton Qty
(B:) Box Qty (C:) Carton Qty
183 RangeYellow 183 Y
3.9 x 25B: 1,000
C: 16,000
(B:) Box Qty (C:) Boxes Per Carton
Head:Thread:Tip Design:
CountersunkHigh/LowSelf-Drilling
150 Range
Yellow 150 Y 151 Y 153 Y 154 Y 155 YZinc 150 Z 151 Z 153 Z 154 Z 155 Z
M4 x 16B: 1,000
C: 15,000M4 x 19
B: 1,000C: 16,000 M4 x 25
B: 1,000C: 12,000
M4 x 32B: 1,000C: 8,000 M4 x 38
B: 500C: 6,000
(B:) Box Qty (C:) Carton Qty
Head:Thread:Tip Design:
Countersunk MetricSelf-Drilling
* Martensitic 410 Stainless Steel
* Martensitic 410 Stainless Steel
230 Range
Zinc 230 Z 231 Z 232 ZStainless* - 231 SS -
M4 x 13B: 1,000C: 8,000
M4 x 16B: 1,000C: 8,000
M4 x 19B: 1,000C: 8,000
(B:) Box Qty (C:) Carton Qty
Head:Thread:Tip Design:
Countersunk FacetMetricSelf-Drilling
* Martensitic 410 Stainless Steel
Head:Thread:Tip Design:
CountersunkSelf-TappingSelf-Drilling
Friction Stay to Reinforcement
Reinforced Friction Stay
Reinforced
Zinc 135 Z 136 Z 137 Z 138 Z 141 Z 142 Z 143 ZStainless* 135 SS 136 SS 137 SS 138 SS - - 143 SS
3.9 x 16B: 1,000
C: 15,0003.9 x 19
B: 1,000C: 16,000 3.9 x 25
B: 1,000C: 12,000
3.9 x 29B: 1,000
C: 12,000
REPA
IR S
CREW
S FO
R ST
RIPP
ED H
OLE
S
4.8 x 16B: 1,000
C: 16,0004.8 x 19
B: 1,000C: 16,000 4.8 x 23
B: 1,000C: 12,000
135 Range 141 Range
(B:) Box Qty (C:) Carton Qty
Head:Thread:Tip Design:
Shallow Pan CountersunkSelf-TappingSelf-Drilling * Martensitic 410 Stainless Steel
Head:Thread:Tip Design:
Shallow Pan CountersunkHigh/High TwinSelf-Drilling
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
37
CARBO
N STEEL PV
Cu WIN
DO
W FA
BRICATION
SCREWS FO
R REINFO
RCED FRA
MES
Key Features Roofing Bolts & Square Nuts
TIMco Code Thread 0 x Length (mm) Nut Size Box Qty Carton Qty Pallet Qty
0512RB M5 x 12 M5 200 3,600 129,6000530RB M5 x 30 M5 200 2,000 60,0000608RB M6 x 08 M6 200 3,600 129,6000612RB M6 x 12 M6 200 2,000 60,0000616RB M6 x 16 M6 200 2,000 60,0000620RB M6 x 20 M6 200 2,000 60,0000625RB M6 x 25 M6 100 1,800 64,8000630RB M6 x 30 M6 100 1,500 64,8000635RB M6 x 35 M6 100 1,000 30,0000640RB M6 x 40 M6 100 1,000 30,0000650RB M6 x 50 M6 100 1,000 30,0000660RB M6 x 60 M6 100 800 24,0000670RB M6 x 70 M6 100 800 24,0000680RB M6 x 80 M6 100 800 24,00006100RB M6 x 100 M6 100 800 24,0000825RB M8 x 25 M8 100 1,000 30,0000830RB M8 x 30 M8 100 1,000 30,0000840RB M8 x 40 M8 100 800 24,0000850RB M8 x 50 M8 100 800 24,0000860RB M8 x 60 M8 100 600 21,6000880RB M8 x 80 M8 50 400 12,00008100RB M8 x 100 M8 50 400 12,00008120RB M8 x 120 M8 50 400 12,00008140RB M8 x 140 M8 50 400 12,00008160RB M8 x 160 M8 50 300 10,80008180RB M8 x 180 M8 50 300 10,80008200RB M8 x 200 M8 50 300 10,800
The flat countersink under the head distributes the load across the fixing to increase the clamping effectiveness
Zinc plated and passivated
(Unassembled)
Fully threaded to 150mm
A bolt mostly used for fixing metal
Metal
Materials
TIMbag See Page 62
Key Features Coach Screws - DIN571
TIMco Code Thread 0 x Length (mm) A/F (mm) Box Qty Carton Qty Pallet Qty
0625CSC 6 x 25 10 250 3,000 108,0000630CSC 6 x 30 10 250 3,000 108,0000640CSC 6 x 40 10 200 2,400 86,4000650CSC 6 x 50 10 200 1,600 48,0000660CSC 6 x 60 10 200 1,600 48,0000665CSC 6 x 65 10 200 1,600 48,0000670CSC 6 x 70 10 200 1,600 48,0000675CSC 6 x 75 10 100 1,200 43,2000680CSC 6 x 80 10 100 1,200 43,20006100CSC 6 x 100 10 200 1,200 36,0000830CSC 8 x 30 13 200 1,600 48,0000840CSC 8 x 40 13 200 1,600 48,0000850CSC 8 x 50 13 100 1,200 43,2000860CSC 8 x 60 13 100 1,200 43,2000865CSC 8 x 65 13 100 800 24,0000870CSC 8 x 70 13 100 800 24,0000875CSC 8 x 75 13 100 800 24,0000880CSC 8 x 80 13 100 800 24,0000890CSC 8 x 90 13 50 600 21,60008100CSC 8 x 100 13 50 600 21,60008150CSC 8 x 150 13 50 600 21,6001040CSC 10 x 40 17 100 800 24,0001050CSC 10 x 50 17 100 800 24,0001060CSC 10 x 60 17 100 600 18,0001070CSC 10 x 70 17 100 600 18,0001075CSC 10 x 75 17 100 600 18,0001080CSC 10 x 80 17 50 400 12,00010100CSC 10 x 100 17 50 400 12,00010120CSC 10 x 120 17 50 400 12,00010130CSC 10 x 130 17 50 400 12,00010150CSC 10 x 150 17 25 300 10,80010200CSC 10 x 200 17 20 240 8,6401250CSC 12 x 50 19 100 600 18,0001275CSC 12 x 75 19 50 400 12,0001280CSC 12 x 80 19 25 300 10,80012100CSC 12 x 100 19 25 300 10,80012150CSC 12 x 150 19 25 200 6,000
A hexagon head woodscrew mostly used in wood and nylon plugs
Zinc plated (Cr3) and passivated
Conforms to DIN 571
standard
Hardwood Masonry with Nylon PlugSoftwood
Materials
TIMbag See Page 62
To BS EN ISO 14566:2008
Zinc plated
No3 Pozi Combi Drive
Conforms to DIN6923
Key Features
TIMco Code
Thread 0 x Length (mm)
Nut Size
A/F (Nut) (mm)
Box Qty
Carton Qty
Pallet Qty
CTB612 M6 x 12 M6 10 200 3,200 76,800CTB616 M6 x 16 M6 10 200 3,200 76,800CTB620 M6 x 20 M6 10 200 3,200 76,800CTB625 M6 x 25 M6 10 200 3,200 76,800
Cable Tray Bolts with Serrated Hex Flange Nut
38
COA
CH SCREW
S, ROO
FING
BO
LTSSales: U
K +44 (0)1829 261111 • Ireland +353 (0)4763538
Key FeaturesCup Square Carriage Bolts & Hex Nut
TIMco Code
Thread 0 x Length (mm)
Nut Size
A/F (Nut) (mm)
Box Qty
Carton Qty
Pallet Qty
0620CB M6 x 20 M6 10 200 2,000 60,0000625CB M6 x 25 M6 10 200 1,600 48,0000630CB M6 x 30 M6 10 200 1,600 48,0000640CB M6 x 40 M6 10 200 2,400 57,6000650CB M6 x 50 M6 10 200 2,400 57,6000655CB M6 x 55 M6 10 200 1,800 43,2000660CB M6 x 60 M6 10 100 1,600 38,4000665CB M6 x 65 M6 10 100 800 24,0000670CB M6 x 70 M6 10 100 800 24,0000675CB M6 x 75 M6 10 100 800 24,00006100CB M6 x 100 M6 10 100 900 21,6000820CB M8 x 20 M8 13 200 1200 43,2000825CB M8 x 25 M8 13 100 1,000 30,0000830CB M8 x 30 M8 13 100 800 24,0000835CB M8 x 35 M8 13 100 800 24,0000840CB M8 x 40 M8 13 100 1,200 28,8000845CB M8 x 45 M8 13 100 800 24,0000850CB M8 x 50 M8 13 100 900 21,6000860CB M8 x 60 M8 13 100 900 21,6000865CB M8 x 65 M8 13 50 400 12,0000870CB M8 x 70 M8 13 50 400 12,0000875CB M8 x 75 M8 13 50 400 12,0000880CB M8 x 80 M8 13 50 400 12,0000890CB M8 x 90 M8 13 50 400 12,00008100CB M8 x 100 M8 13 50 600 14,40008110CB M8 x 110 M8 13 50 400 12,00008120CB M8 x 120 M8 13 50 400 12,00008130CB M8 x 130 M8 13 50 400 12,00008150CB M8 x 150 M8 13 25 450 10,8001025CB M10 x 25 M10 17 100 600 21,6001030CB M10 x 30 M10 17 100 600 21,6001035CB M10 x 35 M10 17 50 400 12,0001040CB M10 x 40 M10 17 50 400 12,0001050CB M10 x 50 M10 17 50 400 12,0001065CB M10 x 65 M10 17 50 450 10,8001070CB M10 x 70 M10 17 50 450 10,8001075CB M10 x 75 M10 17 50 300 10,8001080CB M10 x 80 M10 17 50 300 9,0001090CB M10 x 90 M10 17 25 300 8,10010100CB M10 x 100 M10 17 25 300 8,10010110CB M10 x 110 M10 17 25 400 9,60010120CB M10 x 120 M10 17 25 400 9,60010130CB M10 x 130 M10 17 25 300 7,20010140CB M10 x 140 M10 17 25 225 5,40010150CB M10 x 150 M10 17 25 225 5,40010160CB M10 x 160 M10 17 25 225 5,40010180CB M10 x 180 M10 17 25 200 4,80010200CB M10 x 200 M10 17 10 120 2,80010220CB M10 x 220 M10 17 10 120 2,88010260CB M10 x 260 M10 17 10 120 2,8801275CB M12 x 75 M12 19 25 300 7,20012100CB M12 x 100 M12 19 25 225 5,40012110CB M12 x 110 M12 19 25 225 5,40012120CB M12 x 120 M12 19 10 160 3,84012130CB M12 x 130 M12 19 10 160 3,84012150CB M12 x 150 M12 19 10 180 4,32012180CB M12 x 180 M12 19 10 120 2,88012200CB M12 x 200 M12 19 10 120 2,88012220CB M12 x 220 M12 19 10 120 2,88012240CB M12 x 240 M12 19 10 120 2,880
Domed top and a square under the head. The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened
Zinc plated and passivated
Fully threaded to 150mm
Conforms to DIN934 (Hexagon Nut) standards
A bolt mostly used in wood.
• Double sided tooth plate
• Conforms to: BS EN 912:2000
• Pre-galvanised mild steel
Timber ConnectorsKey Features
HardwoodSoftwood
Materials
TIMbag See Page 62
To BS EN ISO 14566:2008
Key Features
Zinc plated and passivated (3-5 microns)
Threaded Bar - DIN975 - Grade 4.8
TIMco Code Thread 0 x Length (mm) Finish Pcs/Bundle
06300TBZ M6 x 300mm Zinc 1008300TBZ M8 x 300mm Zinc 1010300TBZ M10 x 300mm Zinc 1012300TBZ M12 x 300mm Zinc 1016300TBZ M16 x 300mm Zinc 1006TBZ M6 x 1000mm Zinc 1008TBZ M8 x 1000mm Zinc 1010TBZ M10 x 1000mm Zinc 1012TBZ M12 x 1000mm Zinc 1016TBZ M16 x 1000mm Zinc 1020TBZ M20 x 1000mm Zinc 5
TIMco Code Size (mm) Bore Type Finish Box Qty
TCD50 50 M12 Double Galvanised 100
Conforms to DIN603
(Carriage Bolt)
39
CUP SQ
UA
RE CA
RRIAG
E BO
LTS AN
D TIM
BER CO
NN
ECTO
RSw
ww
.TIMco.co.uk • w
ww
.TIMco.ie
Key Features
Key Features
Sets - DIN 933 (ISO 4017) - Grade 8.8
Bolts - DIN 931 (ISO 4014) - Grade 8.8
TIMco Code
Thread 0 x Length (mm)
A/F (mm)
Box Qty
Carton Qty
Pallet Qty
S1040Z M10 x 40 17 100 600 21,600S1050Z M10 x 50 17 100 600 21,600S1060Z M10 x 60 17 100 400 14,400S1070Z M10 x 70 17 100 400 14,400S1075Z M10 x 75 17 100 400 14,400S1080Z M10 x 80 17 100 400 14,400S10100Z M10 x 100 17 50 300 10,800S1225Z M12 x 25 19 100 600 21,600S1230Z M12 x 30 19 100 600 21,600S1235Z M12 x 35 19 100 400 14,400S1240Z M12 x 40 19 100 400 14,400S1245Z M12 x 45 19 100 400 14,400S1250Z M12 x 50 19 100 400 14,400S1260Z M12 x 60 19 100 400 14,400S1270Z M12 x 70 19 50 300 10,800S1275Z M12 x 75 19 50 300 10,800S1280Z M12 x 80 19 50 300 10,800S12100Z M12 x 100 19 50 200 7,200S12120Z M12 x 120 19 50 200 7,200S1625Z M16 x 25 24 50 300 10,800S1630Z M16 x 30 24 50 300 10,800S1635Z M16 x 35 24 50 200 7,200S1640Z M16 x 40 24 50 200 7,200S1645Z M16 x 45 24 50 200 7,200S1650Z M16 x 50 24 50 200 7,200S1655Z M16 x 55 24 50 200 7,200S1660Z M16 x 60 24 50 200 7,200S1665Z M16 x 65 24 25 150 5,400S1670Z M16 x 70 24 25 150 5,400S1675Z M16 x 75 24 25 150 5,400S1680Z M16 x 80 24 25 150 5,400S16100Z M16 x 100 24 25 100 3,600S2040Z M20 x 40 30 25 150 5,400S2045Z M20 x 45 30 25 150 5,400S2050Z M20 x 50 30 25 100 3,600S2055Z M20 x 55 30 25 100 3,600S2060Z M20 x 60 30 25 100 3,600S2065Z M20 x 65 30 25 100 3,600S2070Z M20 x 70 30 25 100 3,600S2075Z M20 x 75 30 25 100 3,600S2080Z M20 x 80 30 25 75 2,700S2090Z M20 x 90 30 20 80 2,880S20100Z M20 x 100 30 20 80 2,880
TIMco Code
Thread 0 x Length (mm)
Thread Length (mm)
A/F (mm)
Box Qty
Carton Qty
Pallet Qty
B10130Z M10 x 130 32 17 50 200 7,200B10150Z M10 x 150 32 17 50 200 7,200B1250Z M12 x 50 30 19 100 400 14,400B1260Z M12 x 60 30 19 100 400 14,400B1265Z M12 x 65 30 19 50 300 10,800B1270Z M12 x 70 30 19 50 300 10,800B1275Z M12 x 75 30 19 50 300 10,800B1280Z M12 x 80 30 19 50 300 10,800B1290Z M12 x 90 30 19 50 200 7,200B12100Z M12 x 100 30 19 50 200 7,200B12110Z M12 x 110 30 19 50 200 7,200B12120Z M12 x 120 30 19 50 200 7,200B12130Z M12 x 130 36 19 50 150 5,400B12140Z M12 x 140 36 19 25 150 5,400B12150Z M12 x 150 36 19 25 150 5,400B12180Z M12 x 180 36 19 25 100 3,600B12200Z M12 x 200 36 19 25 100 3,600B1660Z M16 x 60 38 24 50 200 7,200B1665Z M16 x 65 38 24 25 150 5,400B1670Z M16 x 70 38 24 25 150 5,400B1675Z M16 x 75 38 24 25 150 5,400B1680Z M16 x 80 38 24 25 150 5,400B1690Z M16 x 90 38 24 25 150 5,400B16100Z M16 x 100 38 24 25 100 3,600B16110Z M16 x 110 38 24 25 100 3,600B16120Z M16 x 120 38 24 25 100 3,600B16130Z M16 x 130 44 24 25 100 3,600B16140Z M16 x 140 44 24 25 100 3,600B16150Z M16 x 150 44 24 25 75 2,700B2060Z M20 x 60 46 30 25 100 3,600B2065Z M20 x 65 46 30 25 100 3,600B2070Z M20 x 70 46 30 25 100 3,600B2075Z M20 x 75 46 30 25 100 3,600B2080Z M20 x 80 46 30 25 75 2,700B2090Z M20 x 90 46 30 20 80 2,880B20100Z M20 x 100 46 30 20 80 2,880B20110Z M20 x 110 46 30 20 80 2,880B20130Z M20 x 130 52 30 10 60 2,160
TIMco Code
Thread 0 x Length (mm)
A/F (mm)
Box Qty
Carton Qty
Pallet Qty
S612Z M6 x 12 10 500 5,000 180,000S616Z M6 x 16 10 500 4,000 144,000S620Z M6 x 20 10 500 3,000 108,000S625Z M6 x 25 10 500 3,000 108,000S630Z M6 x 30 10 500 3,000 108,000S635Z M6 x 35 10 500 2,000 72,000S640Z M6 x 40 10 200 2,000 72,000S650Z M6 x 50 10 200 1,600 57,600S816Z M8 x 16 13 200 2,000 72,000S820Z M8 x 20 13 200 1,600 57,600S825Z M8 x 25 13 200 1,600 57,600S830Z M8 x 30 13 200 1,200 43,200S835Z M8 x 35 13 200 1,200 43,200S840Z M8 x 40 13 200 1,200 43,200S850Z M8 x 50 13 200 800 28,800S860Z M8 x 60 13 200 800 28,800S870Z M8 x 70 13 200 800 28,800S880Z M8 x 80 13 200 600 21,600S8100Z M8 x 100 13 100 400 14,400S1020Z M10 x 20 17 200 800 28,800S1025Z M10 x 25 17 200 800 28,800S1030Z M10 x 30 17 200 800 28,800S1035Z M10 x 35 17 100 800 28,800
TIMco Code
Thread 0 x Length (mm)
Thread Length (mm)
A/F (mm)
Box Qty
Carton Qty
Pallet Qty
B840Z M8 x 40 22 13 200 1,200 43,200B850Z M8 x 50 22 13 200 800 28,800B860Z M8 x 60 22 13 200 800 28,800B870Z M8 x 70 22 13 200 800 28,800B880Z M8 x 80 22 13 200 600 21,600B890Z M8 x 90 22 13 100 600 21,600B8100Z M8 x 100 22 13 100 400 14,400B8110Z M8 x 110 22 13 100 400 14,400B8120Z M8 x 120 22 13 100 400 14,400B1040Z M10 x 40 26 17 100 600 21,600B1050Z M10 x 50 26 17 100 600 21,600B1060Z M10 x 60 26 17 100 400 14,400B1070Z M10 x 70 26 17 100 400 14,400B1075Z M10 x 75 26 17 100 400 14,400B1080Z M10 x 80 26 17 100 400 14,400B1090Z M10 x 90 26 17 50 300 10,800B10100Z M10 x 100 26 17 50 300 10,800B10110Z M10 x 110 26 17 50 300 10,800B10120Z M10 x 120 26 17 50 300 10,800
Zinc plated (Cr3) and passivated (3-5 microns)
Hex Head
Partially Threaded
Fully Threaded
Hex Head
Zinc plated (Cr3) and passivated (3-5 microns)
TIMbag See Page 62
40
SETS & B
OLTS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
DIN 934 - Hexagonal Full NutTIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NH4Z M4 7 3.2 1500 30,000NH5Z M5 8 4 1000 20,000NH6Z M6 10 5 500 10,000NH8Z M8 13 6.5 200 4,000NH10Z M10 17 8 100 2,000NH12Z M12 19 10 100 1,200NH16Z M16 24 13 100 600NH20Z M20 30 16 50 300NH6ZBULK M6 10 5 - 12,000NH8ZBULK M8 13 6.5 - 5,500NH10ZBULK M10 17 8 - 2,500NH12ZBULK M12 19 10 - 1,700NH16ZBULK M16 24 13 - 800NH20ZBULK M20 30 16 - 400
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
Zinc plated (Cr3) and passivated (3-5 microns)
DIN 985 - Nylon Insert Nuts - Type T (Thin) TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NT6Z M6 10 6 500 8,000NT8Z M8 13 8 200 3,200NT10Z M10 17 10 100 1,600NT12Z M12 19 12 100 1,000NT16Z M16 24 16 100 600NT6ZBULK M6 10 6 - 11,000NT8ZBULK M8 13 8 - 5,000
DIN 982 - Nylon Insert Nuts - Type P (Full) TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NP6Z M6 10 8 500 6,000NP8Z M8 13 9.5 200 2,400NP10Z M10 17 11.5 100 1,200NP12Z M12 19 14 100 800NP16Z M16 24 18 100 400NP6ZBULK M6 10 8 - 8,000NP8ZBULK M8 13 9.5 - 4,000
DIN 6334 - Hex Connector Nut TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NC6Z M6 10 18 200 2,400NC8Z M8 13 24 100 1,200NC10Z M10 17 30 100 400NC12Z M12 19 36 100 400NC16Z M16 24 48 50 200NC20Z M20 30 60 25 100
DIN 1587 - Hex Dome Nut TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
ND6Z M6 10 12 200 4,000ND8Z M8 13 15 100 2,000ND10Z M10 17 18 100 800ND12Z M12 19 22 100 800ND16Z M16 24 28 100 400ND20Z M20 30 34 50 200
DIN 6923 - Hex Serrated Flange Nut TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NF6Z M6 10 6 300 4,800NF8Z M8 13 8 200 3,200NF10Z M10 17 10 100 1,600NF12Z M12 19 12 100 1,200NF16Z M16 24 16 100 400NF20Z M20 30 20 50 200
Wing Nut TIMco Code Size A/F (mm) Height (mm) Box Qty Carton Qty
NW6Z M6 N/A N/A 300 4,800NW8Z M8 N/A N/A 200 3,200NW10Z M10 N/A N/A 100 1,600NW12Z M12 N/A N/A 100 1,200NW16Z M16 N/A N/A 100 400
TIMbag See Page 63
TIMbag See Page 63
41
NU
TS w
ww
.TIMco.co.uk • w
ww
.TIMco.ie
CABLE TIES
BS 4320 - FORM A Washer TIMco Code Size x Outer 0 (mm) Thickness (mm) Box Qty Carton Qty
WA4Z M4 x 9 0.8 1,250 50,000WA5Z M5 x 10 1 1,000 32,000WA6Z M6 x 12.5 1.6 500 16,000WA8Z M8 x 17 1.6 200 6,400WA10Z M10 x 21 2 100 3,200WA12Z M12 x 24 2.5 100 2,000WA14Z M14 x 24 2.5 100 1,600WA16Z M16 x 30 3 100 800WA20Z M20 x 37 3 100 800WA24Z M24 x 44 4 100 400WA6ZBULK M6 x 12.5 1.6 - 20,000WA8ZBULK M8 x 17 1.6 - 10,000WA10ZBULK M10 x 21 2 - 5,000WA12ZBULK M12 x 24 2.5 - 2,500WA16ZBULK M16 x 30 3 - 2,000
Zinc plated and passivated(3-5 microns)
TIMbag See Page 63
Zinc plated and passivated(3-5 microns)
Penny / Repair Washer TIMco Code Size x Outer 0 (mm) Thickness (mm) Box Qty Carton Qty
WP525Z M5 x 25 1.5 100 3,200WP525Z M6 x 20 1.5 100 3,200WP625Z M6 x 25 1.5 100 3,200WP630Z M6 x 30 1.5 100 2,000WP640Z M6 x 40 1.5 100 1,600WP825Z M8 x 25 1.5 100 1,200WP830Z M8 x 30 1.5 100 3,200WP840Z M8 x 40 1.5 100 2,000WP1025Z M10 x 25 1.5 100 1,600WP1030Z M10 x 30 1.5 100 3,200WP1040Z M10 x 40 1.5 100 2,000WP1240Z M12 x 40 1.5 100 1,600WP620ZBULK M6 x 20 1.5 - 5,000WP625ZBULK M6 x 25 1.5 - 3,500WP630ZBULK M6 x 30 1.5 - 2,500WP640ZBULK M6 x 40 1.5 - 1,700WP825ZBULK M8 x 25 1.5 - 3,500WP840ZBULK M8 x 40 1.5 - 1,700WP1040ZBULK M10 x 40 1.5 - 1,700WP1240ZBULK M12 x 40 1.5 - 1,700
TIMbag See Page 63
Zinc plated and passivated(3-5 microns)
Zinc plated and passivated(3-5 microns)
Square Plate TIMco Code Size (mm) Hole 0 x L x W x D Box Qty Carton Qty
WS8405Z M8 x 40 x 40 x 5 100 400WS10403Z M10 x 40 x 40 x 3 150 600WS10503Z M10 x 50 x 50 x 3 100 400WS10405Z M10 x 40 x 40 x 5 100 400WS12503Z M12 x 50 x 50 x 3 100 400WS16503Z M16 x 50 x 50 x 3 100 400WS8405ZBULK M8 x 40 x 40 x 5 - 400WS10405ZBULK M10 x 40 x 40 x 5 - 400TIMbag See Page 63
BS 4320 - FORM B Washer TIMco Code Size x Outer 0 (mm) Thickness (mm) Box Qty Carton Qty
WB6Z M6 x 12 0.8 500 20,000WB8Z M8 x 17 1 200 8,000WB10Z M10 x 21 1.25 100 4,000WB12Z M12 x 24 1.6 100 3,200WB16Z M16 x 30 2 100 1,600WB20Z M20 x 37 2 100 1,600WB6ZBULK M6 x 12 0.8 - 32,000WB8ZBULK M8 x 17 1 - 15,000WB10ZBULK M10 x 21 1.25 - 6,000WB12ZBULK M12 x 24 1.6 - 5,000
Zinc plated and passivated(3-5 microns)
BS 4320 - FORM C Washer TIMco Code Size x Outer 0 (mm) Thickness (mm) Box Qty Carton Qty
WC6Z M6 x 14 1.6 500 8,000WC8Z M8 x 21 1.6 200 3,200WC10Z M10 x 24 2 100 3,200WC12Z M12 x 28 2.5 100 1,600WC16Z M16 x 34 3 100 800WC20Z M20 x 39 4 100 800WC6ZBULK M6 x 14 1.6 - 12,000WC8ZBULK M8 x 21 1.6 - 5,00WC10ZBULK M10 x 24 2 - 3,000WC12ZBULK M12 x 28 2.5 - 2,000
Zinc plated and passivated(3-5 microns)
Spring Washer TIMco Code Size (mm) Hole 0 x L x W x D Box Qty Carton Qty
WSP6Z M6 x 9.9 x 3.2 x 1.6 500 20,000WSP8Z M8 x 12.7 x 4 x 2 250 10,000WSP10Z M10 x 16 x 5 x 2.5 200 4,000WSP12Z M12 x 18 x 5 x 2.5 200 3,200WSP16Z M16 x 24.4 x 7 x 3.5 100 1,600
WA
SHERS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
42
Cable Ties - Natural, Black & Mixed
TIMco Code
Colour Size(mm)
Tensile Strength
(Kgs)
Bag Quantity
Carton Quantity
25100CTN Natural 2.5 x 100 8.10 100 60,000 36140CTN Natural 3.6 x 140 18.20 100 30,000 36200CTN Natural 3.6 x 200 18.20 100 20,000 48160CTN Natural 4.8 x 160 22.20 100 16,000 48200CTN Natural 4.8 x 200 22.20 100 15,000 48250CTN Natural 4.8 x 250 22.20 100 12,00048300CTN Natural 4.8 x 300 22.20 100 11,000 48370CTN Natural 4.8 x 370 22.20 100 9,000 48430CTN Natural 4.8 x 430 22.20 100 7,500 76250CTN Natural 7.6 X 250 54.40 100 6,00076300CTN Natural 7.6 x 300 54.40 100 5,000 76370CTN Natural 7.6 x 370 54.40 100 4,000 76540CTN Natural 7.6 x 540 54.40 100 2,00090530CTN Natural 9.0 x 530 79.40 100 2,000
25100CTB Black 2.5 x 100 8.10 100 60,000 36140CTB Black 3.6 x 140 18.20 100 30,000 36200CTB Black 3.6 x 200 18.20 100 20,000 48160CTB Black 4.8 x 160 22.20 100 16,000 48200CTB Black 4.8 x 200 22.20 100 15,000 48250CTB Black 4.8 x 250 22.20 100 12,00048300CTB Black 4.8 x 300 22.20 100 11,000 48370CTB Black 4.8 x 370 22.20 100 9,000 48430CTB Black 4.8 x 430 22.20 100 7,500 76250CTB Black 7.6 x 250 54.40 100 6,00076300CTB Black 7.6 x 300 54.40 100 5,000 76370CTB Black 7.6 x 370 54.40 100 4,000 76540CTB Black 7.6 x 540 54.40 100 2,000 90530CTB Black 9.0 x 530 79.40 100 2,000
48200CTMIXCable Ties - 50 x Yellow, Red, Green, Blue.
4.8 x 200 22.20 200 15,000
Cable Tie Plugs
TIMco Code
Colour Size(mm)
Bag Quantity
Carton Quantity
840CTP Black 8 x 40 (8mm hole) 100 8,500
Key Features
Manufactured from nylon withoperational temperature rangeof -40oc to 85oc.
“There were many potential manufacturers for this range. However very few had the required technical understanding and experience of how to produce a high quality cable tie to meet TIMco’s standards. The manufacturer we have chosen to partner with is one of the world’s largest cable tie manufacturers with a current output of over 10 billion cable ties per year, sold throughout 75 countries. They have also acquired ISO9001/14001 and ISO/TS 16949 accreditations”.
Stewart Lloyd,Purchasing Product Manager.
TIMCO’S NEW RANGE OF
CABLE TIES
TIMco Code
Drill Hole Size(mm)
Min Hole Depth (mm)
Concrete /Masonry
Timber / Soft Substrate
840CTP 8 7 40
Plug - Technical Data
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
43
CABLE TIES &
PLUG
S
Conc
rete
≥
25 N
/mm
2
Conc
rete
(Hol
low
) ≥
15 N
/mm
2
Flet
ton
Brick
≥
30N/
mm
2
Solid
Ches
hire
Clay
Bric
k ≥
45N/
mm
2
Clas
s 'B'
Engi
neer
ing
Brick
(3
x ho
le) ≥
75 N
/mm
2
Dens
e Sol
id Co
ncre
te B
lock
7.3
N/m
m2
Ston
e - Va
rious
Stre
ngth
s
Plas
terb
oard
- A
ll thic
knes
ses/s
treng
ths
Woo
d Pa
nel
- ie.
chip/
block
boar
d
Anchors Concrete Masonry Panel
Ceiling Anchors - pg45 Metal Nail Ins - pg45 Wire Hangers - pg45
Express Nails - pg46
Insulation Fixings - pg46 Plastic Plugs - pg46
Speed Plugs - pg47
Metal Cavity Fixings - pg47
Spring Toggles - pg47
Multi-Fix Screws - pg48
Nylon Frame Fixings - pg49
Nylon Frame Anchors - pg49
Nylon Hammer Fixings - pg49
Multi-Fix Bolts - pg50-51 Throughbolts - pg52 Shield Anchors - pg53 Drop-In Anchors - pg54*
Multi-Fix Resins
Polyester - pg55 * #
Polyester Styrene-Free - pg55 * #
Vinylester Styrene-Free - pg55 * #
Anchors & Fixings Quick Reference Chart
Recommended Tensile LoadsRecommended loads quoted by TIMco are the maximum loads that may be applied in the base material as quoted. Applied loads (unfactored loads) may not exceed these values. (in BS 8539:2012 code of practice for the selection and installation of post-installed anchors in concrete and masonry, recommended loads are referred to as recommended resistances and applied loads as characteristic actions.)
TIMco determines recommended loads from results achieved in their testing facility. Recommended loads are determined from the Characteristic Load (x - ks) divided by a safety factor.
Recommended loads depend on anchors being correctly installed, as per the provided installation instructions, in material of at least the quoted strength and to at least the quoted embedment depth. Recommended loads for masonry are guide values only.
Embedment depths and hole depths. Where embedment depths are quoted in this brochure they refer to the “Nominal embedment depth” of the anchor in the hole, referred to in BS 8539:2012, with the notation
hnom
hefh0
The minimum hole depth is measured to the shoulder of the drill bit, h₀ as per BS 8539, and is valid for the maximum fixture thickness. When using throughbolts, Multi-Fix bolts, shield anchors, nylon frame and nylon hammer fixings,the hole depth should be increased pro rata for thinner fixtures.
Edge distance and centre spacings.In this brochure the dimensions shown under these headings are the distances for which the full recommended load as quoted here may be used (BS 8539 references are: Edge distance, ccr, and Centre spacing, scr).
For some products closer edge and centre spacings may be used with reduced loads, refer to our Technical Department for details.
* Threaded Bars - pg39, 54 # Chemical Studs and Resin accessories - pg56
44
Concrete Stone
Concrete Stone
Ceiling Anchors
Zamac Nail In Anchors
Wirehangers
TIMco Code
Size Ø x Length (mm)
Max Fixture Thickness (mm)
Fixture Clearance Hole Ø (mm)
Box Qty
Carton Qty
Pallet Qty
0640CAM 6 x 40 5 6.5 100 1,000 30,0000665CAM 6 x 65 30 6.5 100 800 24,000
TIMco Code
Size Ø x Length (mm)
Max Fixture Thickness (mm)
Fixture Clearance Hole Ø (mm)
Box Qty
Carton Qty
Pallet Qty
0630ZNA 6 x 30 5 6.5 100 1,800 64,8000640ZNA 6 x 40 15 6.5 100 1,000 30,0000650ZNA 6 x 50 25 6.5 100 800 24,0000665ZNA 6 x 65 40 6.5 100 800 24,000
TIMco Code Size Ø x Length (mm) Eye Ø (mm) Box Qty Carton Qty Pallet Qty
0660WH 6 x 60 6.3 100 1,800 64,800
Key Features
Zinc plated and passivated (3-5 microns)
3H
amm
erw
edge
into
anch
or to
secu
re.
2Pu
sh c
eilin
g an
chor
into
hol
e.
1) Drill a hole to the required diameter and depth
1) Drill a hole to the required diameter and depth
2) Position the fixing through the attachment and into the substrate.
2) Position the fixing through the attachment and into the substrate.
3) Hammer wedge into anchor to secure
3) Hammer nail into anchor to secure
1
Key Features
1) Drill a hole to the required diameter and depth
2) Lightly tap the anchor into the hole
3) Set anchor using a claw hammer
Key Features
Large diameter flange head to firmly secure attachments
6.3mm diameter hole for the attachment of suspension wire or M6 screws
Zinc plated and passivated (3-5 microns)
Large diameter flange head to firmly secure attachments
All steel hammer in anchor
Zinc alloy bodySteel nail
Concrete
Materials
Materials
Materials
Hammer-set - no special setting tool required,little tap the anchor into the hole
Install Guide
Install Guide
Install Guide
Substrate Concrete ≥ 25 N/mm2
Size Ø (mm) 6Drill Hole Ø (mm) 6Embedment Depth (mm) 35Min Drill Hole Depth (mm) 45
Rec. Tensile Load (kN) 0.72
Technical Data
Substrate Concrete ≥ 25 N/mm2
Size Ø (mm) 6Drill Hole Ø (mm) 6Embedment Depth (mm) 25Min Drill Hole Depth (mm) 35
Rec. Tensile Load (kN) 0.70
Technical Data
Substrate Concrete ≥ 25 N/mm2
Size Ø (mm) 6Drill Hole Ø (mm) 6Embedment Depth (mm) 45Min Drill Hole Depth (mm) 50
Rec. Tensile Load (kN) 1.88
Technical Data
Not recommended for overhead applications such as suspended ceilings.
45
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieCEILIN
G A
NCH
ORS
NA
IL IN A
NCH
ORS &
WIREH
AN
GERS
Key Features
Special sprung steel to ensure uniform grip in substrate
Zinc plated and passivated (3-5 microns)
Suitable for all kinds of concrete and masonry substrate materials. Ideal for the attachment of various timber frames, battens and other similar materials.
Materials
Materials
Express Nails
1
2 Hammer expressnail through �xtureinto hole.
1) Drill a hole to the required diameter and depth
2) Hammer express nail through fixture into hole
TIMco Code
Size Ø x Length (mm)
Max Fixture Thickness (mm)
Fixture Clearance Hole Ø (mm)
Box Qty
Carton Qty
00650EN 6 x 50 20 7 200 2,00000660EN 6 x 60 30 7 100 1,00000680EN 6 x 80 50 7 100 1,00000870EN 8 x 70 30 9 100 1,00000890EN 8 x 90 50 9 50 90008110EN 8 x 110 70 9 50 50008130EN 8 x 130 90 9 50 50008150EN 8 x 150 110 9 50 40008180EN 8 x 180 140 9 50 400
Concrete Brick Block Stone
Key Features Metal Insulation Fixings
TIMco Code
Size 0 x Length (mm)
Max Fixture Thickness (mm)
Bag Qty
Carton Qty
Pallet Qty
MIF60 8 x 60 0-20 100 600* 24,000MIF90 8 x 90 30-50 100 400* 16,000MIF110 8 x 110 60-70 100 300* 12,000MIF140 8 x 140 80-100 100 300* 12,000
Metal Insulation Fixings Disc Only
TIMco Code Size 0 x Length (mm) Bag Qty Carton Qty Pallet Qty
MID35 35 100 3,500 -
Plastic Insulation Fixings
TIMco Code
Size 0 x Length (mm)
Max Fixture Thickness (mm)
Bag Qty
Carton Qty
Pallet Qty
PIF70 8 x 70 20-40 100 1000* -PIF90 8 x 90 50-60 100 800* -PIF110 8 x 110 70-80 100 800* -PIF130 8 x 130 90-100 100 800* -
Large diameter head
Plastic: One piece impact resistant copolymer
Metal: All metal through fix
MID35
Concrete Block Brick Stone
Designed to anchor insulation material to concrete and masonry substrate materials.
High density polyethylene material (HDPE)
1) Drill 8mm hole to the required depth and clean hole
2) Hammer fixing through insulation into hole
Install Guide
Install GuideSubstrate Concrete
≥ 25 N/mm2Fletton Brick
30 N/mm2Cheshire Brick
45 N/mm2Class B Eng.
Brick 75 N/mm2
Size Ø (mm) 6 8 6 8 6 8 6 8Drill Hole Ø (mm) 6 8 6 8 6 8 6 8Min Embedment Depth (mm) 30 40 30 40 30 40 30 40Min Drill Hole Depth (mm) 40 50 40 50 40 50 40 50
Rec. Tensile Load (kN) 0.52 1.50 0.48 0.61 0.29 0.53 0.28 0.62
Technical Data
Key FeaturesPlastic Plugs
TIMco Code
Drill Size (mm) #
Plug Length (mm)
Min Drill Hole Depth (mm)
Screw Size
Metric Equiv. Size
Sprig Qty
Box Qty
Carton Qty
Y PLUG 5 25 30 4,6,8 3.0,3.5,4.2 20 100 10,000R PLUG 5.5 30 35 6,8,10 3.5,4.2,4.8 10 100 10,000*B PLUG 7 36 45 8,10,12 4.8,5.5,6.3 10 100 10,000*BL PLUG 10 48 55 14,16,18 6.5,7,7.5 10 40 4,000
Note : Y Plug sold in 1000’s - BL Plug sold in 400’s - * Sold in carton quantities# It may be beneficial to reduce drill diameter in soft materials.
Note : * Sold in carton quantities only.
Substrate Concrete ≥ 25 N/mm2
Type Metal PlasticDrill Hole Ø (mm) 8 8Min Embedment Depth (mm) 40 40Min Drill Hole Depth (mm) 50 50
Rec. Tensile Load (kN) 0.16 0.15
Technical Data
TIMbag See Page 61
46
EXPRESS N
AILS
INSU
LATION
SUPPO
RTSPLA
STIC PLUG
S
Hollow Block Plasterboard Wood Panel
An all metal light duty cavity fixing that is ideal for ceiling installations. Toggle wings spread the load over a wider area.
Install Guide
Install Guide
Install Guide
Spring Toggles with Screws
TIMco Code
Thread Ø (mm)
Screw Length (mm)
Wall and Fixture Thickness (mm)
Min Cavity Depth (mm)
Box Qty
Carton Qty
Pallet Qty
TOG350 M3 50 30 20 100 1,200 24,000TOG550 M5 50 20 30 100 1,200 19,200TOG575 M5 75 45 30 100 1,200 19,200TOG5100 M5 100 70 30 100 600 9,600TOG675 M6 75 45 30 100 600 9,600
Zinc plated and passivated (3-5 microns)
Combi drive recess
Self expanding mechanism
Key Features
Key Features Metal Cavity Anchors
TIMco Code
Screw Length (mm)
Anchor Length (mm)
Screw Size
Fixture Clearance Hole Ø (mm)
Grip Board (mm)
Box Qty
Carton Qty
Pallet Qty
40020CA 25 20 M4 4 0-4 100 2,000 64,00040038CA 45 38 M4 4 8-16 100 2,000 64,00040045CA 50 45 M4 4 16-23 100 2,000 64,00040060CA 65 60 M4 4 31-38 100 2,000 48,00050037CA 45 37 M5 5 6-13 100 2,000 48,00050052CA 60 52 M5 5 7-16 100 1,000 32,00050065CA 70 65 M5 5 17-32 100 1,000 32,00060052CA 60 52 M6 6 7-16 100 1,000 32,00060065CA 70 65 M6 6 17-32 100 1,000 28,000SETOOL 1 - -
Two anti-rotation teeth to prevent the anchor from spinning
Zinc plated (3 microns)
Washer
Metal cavity anchors for soft faced hollow cavity walls and panels such as plasterboard.
For light duty applications in all kinds of plasterboard.
Combination head on the
screw to accept both slot and
cross recess screw drivers
Cross-recess head allows simple installation with a screw driver
1) Drill the required diameter hole using a HSS wood drill bit.
1) Drill a hole to the required diameter
1) Drive the plug into the plasterboard using a CR 2 bit.
2) Place head of screw (with fixing) into jaw of setting tool. Push fixing into hole.
2) Insert screw through fixture and into the toggle. Fit toggle through the hole
2) Tighten the attachment against the plasterboard until secure.
3) Grip and squeeze the setting tool, so as to collapse the fixing against the back of the panel.
3) Allow the wings to spring apart
4) Remove screw and place through attachment and into the fixing.
4) Tighten the screw until the fixing is secure
Metal / Nylon Speed Plugs
TIMco Code
Plug Length (mm)
Screw Size 0 x Length (mm)
Max Fixture Thickness (mm)
Box Qty
Carton Qty
Pallet Qty
TBAZS 31.5 4.5 x 30 6 100 2,000 64,000TBAN* 42 - - 100 1,000 30,000
Plasterboard
Metal Cavity Anchor Setting Tool
Spring loaded setting tool to give a fast and reliable repetitive fixing (code: SETOOL)
(with screw)
Materials
Key Features
Substrate Plasterboard 12.5mm Thickness
Size Ø (mm) M4 M5 M6Drill Hole Ø (mm) 8 10 12
Rec. Tensile Load (kN) 0.18 0.18 0.29
Technical Data
Substrate Plasterboard 12.5mm Thickness
Type Metal Nylon
Rec. Tensile Load (kN) 0.09 0.04
Technical Data
Substrate Plasterboard 12.5mm Thickness
Size Ø (mm) M3 M5 M6Drill Hole Ø (mm) 11 14 18
Rec. Tensile Load (kN) 0.11 0.22 0.26
Technical Data
NB: Can be set effectively with a hand held screw driver.
Materials
Plasterboard Wood Panel
Materials
TIMbag See Page 61
TIMbag See Page 61
Note : * 6mm pre-drilled hole may be required in harder plasterboards.
ww
w.TIM
co.co.uk
47
SPEED PLU
GS
META
L CAV
ITY AN
CHO
RSSPRIN
G TO
GG
LES
NB: Tested using a static load only.
TIMco Multi-Fix Screws
TIMco Code
Size 0 x Length
(mm)
Max Fixture Thickness
(mm)
Fixture Clearance
Hole 0 (mm)
Driver Bit
Size
Box Qty
Carton Qty
Pallet Qty
00040TCON 7.5 x 40 10 8 T30 100 1,800 64,80000050TCON 7.5 x 50 20 8 T30 100 1,200 43,20000060TCON 7.5 x 60 30 8 T30 100 1,200 43,20000070TCON 7.5 x 70 40 8 T30 100 800 36,00000080TCON 7.5 x 80 30 8 T30 100 800 36,00000090TCON 7.5 x 90 40 8 T30 100 800 36,00000100TCON 7.5 x 100 50 8 T30 100 800 36,00000110TCON 7.5 x 110 60 8 T30 100 800 36,00000120TCON 7.5 x 120 70 8 T30 100 800 28,80000130TCON 7.5 x 130 80 8 T30 100 800 28,80000150TCON 7.5 x 150 100 8 T30 100 600 28,80000180TCON 7.5 x 180 130 8 T30 100 600 21,60000200TCON 7.5 x 200 150 8 T30 100 600 21,600
COVER CAPSCAP W 100 White
Light OakMahogany
100 - -CAP O 100 100 - -CAP M 100 100 - -
T30 TIM Drive recess to reduce driver wear and prevent camming out
Drill hole 6.0mm
Flat countersunk head with five
locking ribs
Serrated V-threads to achieve optimum
insertion into all masonry
types
Suitable for concrete,
solid brick, perforated brick,
hollow blocks, natural stone
Zinc plated and yellow passivated
for increased corrosion resistance
Fre e : T30 TIM Driver Bit included in each box
INSTALL IN JUST 2 EASY STEPS
1 DrillDrill the hole 90° to the substrate. Always overdrill the hole depth for dust and debris.
2 FixUsing a power tool, tighten the fixing firmly against the attachment.
ScrewIdeal for fitting windows and door frames
• EASILY ADJUSTABLE • REMOVABLE • NO EXPANSION • THROUGH FIXING
A NEW FIXING DESIGN TO REPLACE THE TRADITIONAL NYLON FRAME & HAMMER FIXINGS
One product - multiple materials
Block
Wood
Stone
Brick
Concrete
FRAME ANCHOR
FRAME FIXING
HAMMER FIXING
The TIMco Multi-Fix screw offers a rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. The special thread configuration taps its own thread within the substrate and eradicates the problems associated with expansion anchors, such as splitting. It also allows the user to adjust the screw ensuring a secure and accurate installation.
Substrate Concrete ≥ 25 N/mm2
Fletton Brick - 30 N/mm2
Cheshire Brick - 45 N/mm2
Class B Eng. Brick - 75 N/mm2
Length (mm) 40-70 80-200 40-70 80-200 40-70 80-200 40-70 80-200 Drill Hole Ø (mm) 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0Embedment Depth (mm) 35 50 35 50 35 50 35 50Min Drill Hole Depth (mm) 45 60 40 60 40 60 40 60
Rec. Tensile Load (kN) 1.07 1.82 1.17 1.79 0.75 1.46 0.85 1.22
Technical Data
TIMbag See Page 61
48
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
includes white push in caps
Key Features
Key Features
Glass fibre reinforced nylon
cone to ensure positive expansion
within the substrate
Anti-rotation lugs to prevent the fixing from turning during
installation
Zinc plated and yellow passivated (3-5 microns)
Zinc plated and yellow passivated (3-5 microns)
For the attachment of all timber, PVCu and metal door and window frames.
For quick and easy fixing into concrete and solid masonry.
Key Features Install Guide
Install Guide
Nylon Frame Fixings
Nylon Frame Anchors
TIMco Code
Size Ø x Length
(mm)
Max Fixture Thickness
(mm)
Bit Size
Box Qty
Carton Qty
Pallet Qty
08080NFF 8 x 80 40 PZ3 100 800 25,60008100NFF 8 x 100 60 PZ3 100 800 25,60008120NFF 8 x 120 80 PZ3 100 800 25,60010080NFF 10 x 80 30 PZ3 100 400 19,20010100NFF 10 x 100 50 PZ3 100 400 19,20010120NFF 10 x 120 70 PZ3 100 400 19,20010140NFF 10 x 140 90 PZ3 100 300 14,40010160NFF 10 x 160 110 PZ3 100 300 14,400
TIMco Code
Size Ø x Length
(mm)
Max Fixture Thickness
(mm)
Bit Size
Box Qty
Carton Qty
Pallet Qty
08100NFA 8 x 100 50 PZ3 100 1,000 48,00008120NFA 8 x 120 70 PZ3 100 800 25,60008140NFA 8 x 140 90 PZ3 100 800 25,60010100NFA 10 x 100 50 PZ3 100 600 28,80010120NFA 10 x 120 70 PZ3 100 400 22,40010140NFA 10 x 140 90 PZ3 100 400 22,400
1) Drill hole through frame and into base material. Clean hole.
1) Drill hole through frame and into substrate and clean hole.
2) Insert fixing through fixture
2) Insert fixing into drill hole.
3) Tighten screw until secure
3) Tighten screw until secure
Anti-rotation lugs to prevent the fixing from turning during
installation
For the attachment of timber frames, windows and similar wood products.
Concrete Block Brick Stone
Concrete Block Brick Stone
Concrete Block Brick Stone
NB: Technical data is available on request.
Materials
Materials
Materials
Substrate Concrete ≥ 25 N/mm2
Fletton Brick 30 N/mm2
Cheshire Brick 45 N/mm2
Class B Eng. Brick 75 N/mm2
Concrete Block 7 N/mm2
Size Ø (mm) 8 10 8 10 8 10 8 10 8 10Drill Hole Ø (mm) 8 10 8 10 8 10 8 10 8 10Embedment Depth (mm) 50 50 50 50 50 50 50 50 50 50Drill Hole Depth (mm) 60 60 60 60 60 60 60 60 60 60
Rec. Tensile Load (kN) 0.75 1.15 0.54 0.87 0.35 0.83 0.23 0.50 0.33 0.33
Technical Data
Substrate Concrete ≥ 25 N/mm2
Fletton Brick 30 N/mm2
Cheshire Brick 45 N/mm2
Class B Eng. Brick 75 N/mm2
Concrete Block 7 N/mm2
Size Ø (mm) 8 10 8 10 8 10 8 10 8 10Drill Hole Ø (mm) 8 10 8 10 8 10 8 10 8 10Embedment Depth (mm) 40 50 40 50 40 50 40 50 40 50Drill Hole Depth (mm) 50 60 50 60 50 60 50 60 50 60
Rec. Tensile Load (kN) 0.50 0.70 0.25 0.46 0.44 0.65 0.43 0.38 0.20 0.24
Technical Data
Nylon Hammer Fixings
TIMco Code
Size Ø x Length (mm)
Max Fixture Thickness (mm)
Box Qty
Carton Qty
Pallet Qty
50030HF 5 x 30 5 200 4,000 128,00050050HF 5 x 50 25 200 2,000 64,00060040HF 6 x 40 15 200 2,000 64,00060050HF 6 x 50 25 200 2,000 64,00060060HF 6 x 60 35 200 2,000 64,00060070HF 6 x 70 45 200 2,000 64,00060080HF 6 x 80 55 200 2,000 64,00080060HF 8 x 60 20 100 2,000 48,00080080HF 8 x 80 40 100 1,000 28,00080100HF 8 x 100 60 100 1,000 28,00080120HF 8 x 120 80 100 1,000 28,00080140HF 8 x 140 100 100 1,000 28,000
Install Guide
1) Drill hole to required 0 and depth. Clean hole.
2) Place the fixing into the attachment and hammer securely into place.
Substrate Concrete ≥ 25 N/mm2
Fletton Brick 30 N/mm2
Cheshire Brick 45 N/mm2
Class B Eng. Brick 75 N/mm2
Size Ø (mm) 5 6 8 5 6 8 5 6 8 5 6 8Drill Hole Ø (mm) 5 6 8 5 6 8 5 6 8 5 6 8Embedment Depth (mm) 25 25 40 25 25 40 25 25 40 25 25 40Drill Hole Depth (mm) 35 35 50 35 35 50 35 35 50 35 35 50
Rec. Tensile Load (kN) 0.19 0.22 0.49 0.19 0.21 0.48 0.21 0.27 0.55 0.17 0.28 0.52
Technical Data
Zinc plated and yellow passivated (3-5 microns)
Tough durable
nylon
Strong collar to support
drive nail
TIMbag See Page 61
TIMbag See Page 61
49
NYLO
N FRA
ME FIXIN
GS
NYLO
N FR
AM
E AN
CHO
RSN
YLON
HA
MM
ER FIXIN
GS
BoltThe heavy duty non-expansion anchor
Substrate Concrete ≥ 25 N/mm2
Fletton Brick - 30 N/mm2
Cheshire Brick - 45 N/mm2
Class B Eng. Brick - 75 N/mm2
Size (mm) 6 8 10 12 16 6 8 10 6 8 10 6 8 10
Length (mm) 50-75 100-150 All All All All - - - - - - - - -Drill Hole Ø (mm) 6 6 8 10 12 16 6 8 10 6 8 10 6 8 10Min Embedment Depth (mm) 30 45 40 50 60 80 30 40 50 30 40 50 30 40 50Min Overdrill for dust (mm) 10 10 15 20 25 35 10 15 20 10 15 20 10 15 20Min Drill Hole Depth (mm) 40 55 55 70 85 115 40 55 70 40 55 70 40 55 70Min Centre Spacing (mm)** 90 140 120 150 180 240 - - - - - - - - -Min Edge Distance (mm)** 45 70 60 75 90 120 - - - - - - - - -Min Structure Thickness (mm) 60 100 90 110 125 175 - - - - - - - - -
Performance at Standard and Deeper embedment depths
Effective Embedment depth (mm) 30 45 40 60 50 75 60 85 80 30 40 50 30 40 50 30 40 50Rec. Tensile Load (kN) 2.44 6.23 3.93 8.36 5.49 12.21 8.97 13.00 13.5 2.28 2.68 3.18 1.36 2.19 3.26 3.49 4.33 -
Technical Data
** Centre spacings and edge distances are based on minimum embedments only.
* Hex Flange Head
* Hex Flange Head
TIMco Multi-Fix Bolts
TIMco Code
Size x Length
(mm)
Drill Hole Ø (mm)
A/F(mm)
Max Fixture Thickness
(mm)
Fixture Clearance
Hole 0 (mm)
Box Qty
Carton Qty
Pallet Qty
MF650 6 x 50 * 6 10 20 8 100 1,000 27,000 MF675 6 x 75 * 6 10 45 8 100 600 16,200 MF6100 6 x 100 * 6 10 55 8 100 600 16,200 MF6130 6 x 130 * 6 10 85 8 100 600 16,200 MF6150 6 x 150 * 6 10 105 8 75 450 12,150 MF860 8 x 60 8 15 20 10 100 600 16,200 MF875 8 x 75 8 15 35 10 100 600 16,200 MF8100 8 x 100 8 15 60 10 50 500 13,500MF8130 8 x 130 8 15 90 10 50 300 8,100 MF8150 8 x 150 8 15 110 10 50 300 8,100MF1060 10 x 60 10 17 10 12 50 500 13,500MF1075 10 x 75 10 17 25 12 50 300 8,100MF10100 10 x 100 10 17 50 12 50 300 8,100MF10130 10 x 130 10 17 80 12 50 300 8,100MF10150 10 x 150 10 17 100 12 25 150 4,050 MF1275 12 x 75 12 19 15 14 50 300 8,100MF12100 12 x 100 12 19 40 14 25 250 6,750MF12130 12 x 130 12 19 70 14 25 150 4,050MF12150 12 x 150 12 19 90 14 25 150 4,050MF12200 12 x 200 12 19 140 14 25 100 2,700MF16100 16 x 100 16 27 20 18 10 80 2,160MF16150 16 x 150 16 27 70 18 10 60 1,620
The TIMco research and development team has spent over four years developing the Multi-Fix bolt. The unique patented concave thread design taps its own thread and provides a rapid, low torque installation with exceptional pull out resistance. It also allows the user to adjust or remove the bolt ensuring a secure and accurate installation.
This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.
• EASILY ADJUSTABLE • REMOVABLE • NO EXPANSION • THROUGH FIXING •
High Low Parallel Threads for ease of insertion and high pull out values
TIMco micro plating technology gives a higher resistance to corrosion and enhances speed of installation
STRONGER • FASTER • EASIER
5050
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
STRONGER • FASTER • EASIER
Concrete
Brick
Stone
Block
Wood
One product - multiple materials
SLEEVEDROP IN
THROUGHBOLT
SHIELD
INSTALL IN JUST 3 EASY STEPS
1 DrillDrill the hole 90° to the substrate. Always drill to the stated hole depth for dust and debris.
2 CleanClean the hole by blowing out the dust and debris.
3 FixScrew the bolt into the hole whilst applying slight pushing pressure to the bolt.
A NEW PATENTED ANCHOR DESIGN TO REPLACE TRADITIONAL FIXINGS
Sizes available in Prepack
TIMbag Code
Size 0 x Length (mm)
Bag Qty
Bags Per Carton
MFB650B 6 x 50 20 25
MFB860B 8 x 60 20 12
MFB875B 8 x 75 20 10
MFB8100B 8 x 100 20 8
MFB1060B 10 x 60 10 15
MFB1075B 10 x 75 10 12
MFB10100B 10 x 100 10 10
MFB10150B 10 x 150 10 7
MFB1275B 12 x 75 10 8
MFB12100B 12 x 100 10 7
MFB12150B 12 x 150 10 5
Sizes available in TIMbag
TIMbag Code
Size 0 x Length (mm)
Bag Qty
Bags Per Carton
MF650B 6 x 50 64 5
MF860B 8 x 60 30 5
MF875B 8 x 75 26 5
MF8100B 8 x 100 20 5
MF1060B 10 x 60 18 5
MF1075B 10 x 75 14 5
MF10100B 10 x 100 12 5
MF10150B 10 x 150 8 5
MF1275B 12 x 75 12 5
MF12100B 12 x 100 8 5
MF12130B 12 x 130 6 5
MF12150B 12 x 150 6 5
SALT SPRAY400 hours
KESTERNICH TEST3 cycles
51
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Sold complete, assembled and ready for use.
Torque controlled throughbolt anchor suitable for concrete.
Special expansion
clip for rapid installation
Cold Formed Carbon Steel
- Grade 5. 8
Concrete
Throughbolts - Zinc Plated - Grade 5.8Key Features
Chamfered head design to prevent damage to thread during installation
Zinc plated and passivated (3-5 microns)
1) Drill a hole to the required diameter and depth
3) Set nut just below chamfer and hammer anchor through fixture into hole
2) Clean the hole
4) Tighten to the recommended torque (use deep reach socket)
Key Features Forged Hooks
Forged Eyes
TIMco Code Thread 0 Thread Length (mm) Box Qty Carton Qty
06HOOK M6 50 50 90008HOOK M8 60 50 50010HOOK M10 73 50 30012HOOK M12 90 25 200
TIMco Code Thread 0 Thread Length (mm) Eye (mm) Box Qty Carton Qty
06EYE M6 50 8 50 90008EYE M8 60 10 50 50010EYE M10 73 12 50 40012EYE M12 95 16 25 200
Forged Hook
and EyeZinc plated and
passivated (3-5 microns)
Materials
Installation Guide
Note : If no torque wrench available tighten nut 3 to 4 full turns from finger tight.
Substrate Concrete ≥ 25 N/mm2
Size Ø (mm) M6 M8 M10 M12 M16 M20 M24Drill Hole Ø (mm) 6 8 10 12 16 20 285Embedment Depth (mm) 30 35 45 50 65 80 95Min Drill Hole Depth (mm) 40 45 50 60 75 90 120Centre Spacing (mm) 90 110 140 150 200 240 300Edge Distance (mm) 45 55 70 75 100 120 150Min Structure Thickness (mm) 60 70 90 100 130 160 190Rec. Tightening Torque (Nm) 10 15 30 45 100 160 -
Rec. Tensile Load (kN) 2.29 2.92 4.11 7.25 8.08 11.15 -
Technical Data
TIMbag See Page 61
TIMbag See Page 61
TIMco Code
Thread Ø x Length
(mm)
Max Fixture Thickness
(mm)
Fixture Clearance
Hole Ø (mm)
A/F(mm)
Box Qty
Carton Qty
0645TB M6 x 45 5 7 10 100 1,0000685TB M6 x 85 45 7 10 100 8000850TB M8 x 50 5 9 13 100 8000865TB M8 x 65 10 9 13 100 8000880TB M8 x 80 25 9 13 50 50008100TB M8 x 100 45 9 13 50 40008130TB M8 x 130 75 9 13 50 3001065TB M10 x 65 5 12 17 50 4001075TB M10 x 75 10 12 17 50 40010100TB M10 x 100 35 12 17 50 30010120TB M10 x 120 55 12 17 50 2001280TB M12 x 80 5 14 19 25 30012100TB M12 x 100 25 14 19 25 20012120TB M12 x 120 45 14 19 25 20012140TB M12 x 140 65 14 19 25 15012180TB M12 x 180 105 14 19 25 15016105TB M16 x 105 5 18 24 25 15016125TB M16 x 125 20 18 24 25 20016150TB M16 x 150 45 18 24 15 9016175TB M16 x 175 70 18 24 15 9020130TB M20 x 130 5 22 30 10 4020160TB M20 x 160 30 22 30 10 4020215TB M20 x 215 85 22 30 8 48
52
THRO
UG
HB
OLTS, FO
RGED
HO
OKS &
EYES
52
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Key Features
Traditional torque controlled expansion anchor with three piece segmented body and captive expansion cone. Zinc plated and yellow passivated (3-5 microns).
TIMco Code
Thread Ø (mm)
Stud (Bolt) Length
(mm)
Max Fixture Thickness
(mm)
Fixture Clearance
Hole Ø (mm)
A/F(mm)
Box Qty
Carton Qty
0660PSH M6 110 60 8 10 50 5000810PSH M8 70 10 10 13 50 4000825PSH M8 85 25 10 13 50 4000860PSH M8 120 60 10 13 50 4001015PSH M10 85 15 12 17 25 2501030PSH M10 100 30 12 17 25 2001060PSH M10 130 60 12 17 25 2001215PSH M12 105 15 14 19 10 1001230PSH M12 120 30 14 19 10 1001275PSH M12 165 75 14 19 10 801635PSH M16 160 35 18 24 10 60
Projecting Bolt - Grade 5.8
TIMco Code Thread Ø (mm) Shield Length (mm) Box Qty Carton Qty
06SH M6 45 50 90008SH M8 50 50 50010SH M10 60 50 40012SH M12 75 25 200
Shield Only
NB: The tensile load tests are based upon the use of 8.8 strength bolts. However, the ‘Projecting Type’ are supplied with 5.8 strength bolts. This should nevertheless not unduly effect the performance of the anchor, given that this is taken into consideration when selecting the product. Please consult our technical department for further advice.
Fix in centre line of brick 35-40mm from ends and avoid top 3 courses, edge bricks, part bricks and mortar joints. Suitable in solid brickwork with sound mortar joints only up to M12 bolt diameter.
Concrete Brick Stone
1) Drill a hole to the required diameter and depth
3) Gently tap the anchor shield in the hole
2) Clean the hole
5) Tighten to recommended torque using a deep reach socket
4) Put the stud through the attachment and into the anchor shield and then screw fully into the expander cone of the shield at least five full turns.
Follow stages 1 - 3 for shield first.
5) Tighten to recommended torque.
4) Put the bolt through the attachment and into the anchor shield
Follow stages 1 - 3 for shield first.
Shield Only
Loose Bolt
Projecting Bolt
Materials
Loose Bolt
Projecting Bolt
Installation Guide
TIMco Code
Thread Ø (mm)
Bolt Length
(mm)
Max Fixture Thickness
(mm)
Fixture Clearance
Hole Ø (mm)
A/F(mm)
Box Qty
Carton Qty
0610LSH M6 50 10 8 10 100 8000625LSH M6 65 25 8 10 50 5000810LSH M8 60 10 10 13 50 4000825LSH M8 75 25 10 13 50 4000840LSH M8 90 40 10 13 25 2501010LSH M10 70 10 12 17 25 2501025LSH M10 85 25 12 17 25 2501050LSH M10 110 50 12 17 25 2001075LSH M10 135 75 12 17 25 2001210LSH M12 90 10 14 19 10 1001225LSH M12 105 25 14 19 10 1001240LSH M12 120 40 14 19 10 1001260LSH M12 140 60 14 19 10 801630LSH M16 135 30 18 24 10 601660LSH M16 165 60 18 24 10 60
Loose Bolt - Grade 8.8
Note : Max fixture thickness must not be exceeded.
Substrate Concrete ≥ 25 N/mm2
Fletton Brick - 30 N/mm2
Cheshire Brick - 45 N/mm2
Class B Eng. Brick - 75 N/mm2
Size Ø (mm) M6 M8 M10 M12 M16 M6 M8 M10 M12 M6 M8 M10 M12 M6 M8 M10 M12Drill Hole Ø (mm) 12 14 16 20 24 12 14 16 20 12 14 16 20 12 14 16 20Embedment Depth (mm) 45 50 60 75 95 45 50 60 75 45 50 60 75 45 50 60 75Min Drill Hole Depth (mm) 55 60 70 85 105 55 60 70 85 55 60 70 85 55 60 70 85Centre Spacing (mm) 135 150 180 225 285 - - - - - - - - - - - -Edge Distance (mm) 70 75 90 120 145 - - - - - - - - - - - -Min Structure Thickness (mm) 90 100 120 150 190 - - - - - - - - - - - -Rec. Tightening Torque (Nm) 5 15 30 45 100 3 7 15 23 3 7 15 23 3 7 15 23
Rec. Tensile Load (kN) 1.04 2.21 2.52 3.80 - 1.47 1.84 1.26 1.34 0.63 1.67 1.93 1.51 0.72 0.41 0.85 -
Technical Data
TIMbag See Page 61
53
SHIELD
AN
CHO
RSw
ww
.TIMco.co.uk • w
ww
.TIMco.ie
Key Features
Zinc plated and passivated (3-5 microns)
A versatile fixing used in multiple applications.
For Nuts and Washer see page 41 & 42
For Resin and Accessories see page 55
Threaded Bar - DIN975 - Grade 4.8
TIMco Code Thread 0 x Length (mm) Finish Pcs/Bundle
06300TBZ M6 x 300mm Zinc 1008300TBZ M8 x 300mm Zinc 1010300TBZ M10 x 300mm Zinc 1012300TBZ M12 x 300mm Zinc 1016300TBZ M16 x 300mm Zinc 1006TBZ M6 x 1000mm Zinc 1008TBZ M8 x 1000mm Zinc 1010TBZ M10 x 1000mm Zinc 1012TBZ M12 x 1000mm Zinc 1016TBZ M16 x 1000mm Zinc 1020TBZ M20 x 1000mm Zinc 5
Key Features
Internally threaded anchor used in concrete.
• Quick hammer-set installation • Two versions – Standard or Lipped (with Collar)• Lipped (with Collar) prevents the anchor being
pushed too far into the concrete during installation• Zinc plated and passivated (3-5 microns)• Setting tools to suit each size of anchor
Drop In Anchors - Standard Style
TIMco Code
Thread 0
Anchor Length
(mm)
Min Thread Length
(mm)
Min Hole Depth (mm)
Clearance Hole in Fixture
(mm)
Box Qty
Carton Qty
06WA M6 25 10 25 8 100 2,00008WA M8 30 14 30 10 100 1,20010WA M10 40 15 40 12 50 60012WA M12 50 20 50 14 50 300
Drop In Anchors - Lipped
TIMco Code
Thread 0
Anchor Length
(mm)
Min Thread Length
(mm)
Min Hole
Depth (mm)
Clearance Hole in Fixture
(mm)
Box Qty
Carton Qty
08LWA M8 30 14 30 10 100 1,2001030LWA M10 30 15 30 12 50 600
1) Drill a hole to the required diameter and depth
3) Place the anchor into the hole
2) Clean the hole
4) Using the matching setting tool and a club hammer, drive the cone into place until the collar of the setting tool rests against the surface of the anchor 5) Screw either a threaded rod or bolt
into the anchor, to the minimum thread insertion depth
Concrete
Standard Style Lipped (with Collar)
Materials
Installation Guide
Substrate Concrete ≥ 25 N/mm2
Size Ø (mm) M6 M8 M10 (1030) M10 M12Drill Hole Ø (mm) 8 10 12 12 16Embedment Depth (mm) 25 30 30 40 50Min Drill Hole Depth (mm) 25 30 30 40 50Centre Spacing (mm) 75 90 90 120 150Edge Distance (mm) 75 90 90 120 150Min Structure Thickness (mm) 100 100 100 100 125Rec. Tightening Torque (Nm) 3 5 7 7 16
Rec. Tensile Load (kN) 1.29 2.22 3.16 4.65 9.35
Technical Data
Setting Tool
TIMco Code To Fit Anchor Size Qty Per Bag
06WAS M6 108WAS M8 110WAS M10 112WAS M12 1
54
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
DRO
P IN A
NCH
ORS A
ND
THREA
DED
BA
RS
The TIMco Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
The range has been carefully selected to cover all fixing scenarios and technical requirements. We have graded the range bronze, silver and gold to assist with product selection.
Polyester Resin (bronze) – An economic resin ideal for day to day non-safety critical applications that are well ventilated at the time of installation. (Not suitable in concrete that is or may become damp).
Polyester Styrene Free (silver) – European Technically Approved (ETA) low odour resin, for day to day non-safety critical fixing. For enclosed or poorly ventilated environments. (Not suitable in concrete that is or may become damp).
Vinylester Styrene Free (gold) – European Technically Approved (ETA) low odour resin to be used in safety critical fixing. For enclosed, poorly ventilated, damp and wet environments. This high performance resin will give consistent results in a wide range of environments and conditions, whilst offering exceptional tensile strength.
The above resins are supplied in a patented cartridge and dispensed through a unique mixing nozzle. This system requires no cutting, provides superior mixing ability with less extrusion force and creates less wastage than some other systems.
Resin
Block
Stone
Brick
Concrete
Two part resin anchoring system
5. RESINPump the resin to fill 2/3 of the hole.
6. FIXINGInsert the fixing into the resin with a slow rotating motion and leave to cure.
1. DRILLthe correct size hole for your fixing.
2. BLOWout any debris from the hole.
3. BRUSHthe hole to ensure sides are clean.
4. BLOWout any debris from the hole due to brushing.
STEPS 2-4
REPEAT x 4
THOROUGH HOLE CLEANING PRIOR TO INSTALLATION IS VITAL TO THE PERFORMANCE OF THE RESIN. FIRST USE - PUMP RESIN TO WASTE UNTIL MIX IS AN EVEN COLOUR.
EASY TO USE QUICK GUIDE
Resin Type Rec. Tensile Load (kN)Stud (5.8 grade) Size M8 M10 M12 M16 M20 M24PE 4.9 7.5 10.6 12.3 19.9 27.4PESF 5.8 8.1 11.6 19.8 29.1 33.1VESF 9.1 13.8 19.4 26.8 35.7 44.6Embedment Depth 80 90 110 125 170 210
Cartridge Size Approx Holes Per Cartridge310ml 66 41 25 13 5 3410ml 92 57 34 18 8 4
Performance Data Concrete ≥ 25N/mm2
NB: See cartridge for gel and curing times.
Approx holes based on standard embedment depth.
TIMco Multi-Fix Resin Range
Conc
rete
Brick
Hollo
w Br
ick
with
Slee
ve
Ston
e
Dam
p & W
et
Holes
Reba
r
Unde
rwat
er
Low
Vent
ilatio
nHe
avy D
uty
Fixing
TIMco Code
Resin Type Size Box Qty
Pallet Qty
Approval
PE310 Polyester 310ml 12 1152 • • • • • •PE410 Polyester 410ml 12 1152 • • • • • •PESF310 Polyester Styrene Free 310ml 12 1152 ETA / CE • • • • • • • •VESF410 Vinylester Styrene Free 410ml 12 1152 ETA / CE • • • • • • • • • • • • • • • • • •
• = Suitable for use •• = Recommended for use
3 READY TO USE3 USES STANDARD TOOLS3 T-FLOW™ NOZZLE INCLUDED3 LOW EXTRUSION FORCE3 LESS WASTAGE3 NO LEAKAGE3 FASTER AND EASIER TO USE3 CLOSE EDGE AND AXIAL SPACING
VESF Fire Rated
55
Blow - Out PumpTIMco Code Size Bag Qty Carton Qty
PUMP 280mm 1 12
Mixing Nozzles
TIMco Code
Internal Thread 0 x Thread Length (mm)
Socket 0 x Length (mm)
Hole 0 (mm)
Hole Depth (mm)
Bag Qty
Carton Qty
10ITS M10 x 25 14 x 80 16 90 50 500
Internally Threaded Sockets - Zinc Plated
Plastic Sleeves
1585CPS M8 - M10 16 x 85 16 90 100 1,00015130CPS M8 - M10 16 x 130 16 135 100 500
Hole Cleaning Brushes
B13 13mm Hole Cleaning Brush 10 100B15 15mm Hole Cleaning Brush 10 100B22 22mm Hole Cleaning Brush 10 240
TNOZ Nozzles 12 120
TIMco Sealant and Resin Gun
TIMco Code Description Bag Qty Carton Qty
SKELGUN Skeleton Gun 1 24PROGUN Professional Sealant Gun - 310ml 1 12RESINGUN Chemical Resin Tool - 410ml 1 10
TIMco Code
Anchor 0 x Length
(mm)
Drill Hole Ø
(mm)
Max Fixture Thickness
(mm)
Hole Depth (mm)
Clearance Hole In Fixture
(mm)
Box Qty
Carton Qty
08110CS M8 x 110 10 13 80 10 10 30010130CS M10 x 130 12 20 90 12 10 20012160CS M12 x 160 14 25 110 14 10 10016190CS M16 X 190 18 35 125 18 10 8020270CS M20 x 270 24 55 170 24 4 36
Chemical Anchor Studs - Grade 5.8 External Hex Drive and Chisel Point - Zinc Plated
TIMco Code
Anchor 0 x Length
(mm)
Drill Hole Ø
(mm)
Max Fixture Thickness
(mm)
Hole Depth (mm)
Clearance Hole In Fixture
(mm)
Box Qty
Carton Qty
08110CSG M8 x 110 10 13 80 10 10 30010130CSG M10 x 130 12 20 90 12 10 20012160CSG M12 x 160 14 25 110 14 10 10016190CSG M16 X 190 18 35 125 18 10 8020270CSG M20 x 270 24 55 170 24 4 3624300CSG M24 x 300 28 60 210 28 3 24
Chemical Anchor Studs - Grade 5.8 External Hex Drive and Chisel Point - Hot Dipped Galvanised
External hex. Can be used with TIMco Multi-Fix resin
Zinc plated and passivated (3-5 microns) or hot dipped galvanised finishes
Embedment depth mark
Chisel point prevents the rod turning when tightning
Key Features
For Threaded Bar see page 39/54
TIMco Tote Tray
TIMco Code Description Bag Qty Carton Qty
TOTE Black Tote Tray 1 22
SKELGUN RESINGUNPROGUN
56
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
56
AN
CHO
R STUD
S
56
RESIN A
CCESSORIES
SEALA
NT / RESIN
GU
NS
What is a TIMbag
The TIMbag has been specifically designed and presented to give a strong visual
impact, durability, and simple identification of products.
This distinctive bag will help to display and sell the product, and will also give the tradesman a robust and convenient
packaging to transport, store and use on site.
The TIMbagA Simple Solution...
Product Visibility
Water Resistant
Drop Proof
Self Standing
Portable
Re-Sealable
Tamper Proof
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIM
co TIMbag
57
Simple Re-stockingTo eliminate the need for overstock. Each shelf divider tray is designed to hold six TIMbags. Each re-order carton contains 5 TIMbags. Simply re-order a carton when you are down to your last pack.
Refill: Carton Qty of 5 to refill shelf divider tray.
Shelf Divider Trays Price BandingTo eliminate product creepage, and to clearly show shelf content.
To provide a simple solution for your own selling prices, we have price banded each bag with an alpha symbol (i.e “B”) which is then cross referenced to a printed strip on the shelf unit which shows your pre-agreed selling price for each alpha symbol. The price band is bespoke to each customer.
Chipboard Screws- Zinc and Yellew
5.0 x 60Imp Equiv: 10 x 2 1/2
TIMco Code:50060CHYB
Price Band A . . . . . . . . . . . . . . . . . . . . .
B . . . . . . . . . . . . . . . . . . . . .
C . . . . . . . . . . . . . . . . . . . . .
D . . . . . . . . . . . . . . . . . . . . .
E . . . . . . . . . . . . . . . . . . . . .
F . . . . . . . . . . . . . . . . . . . . .
G . . . . . . . . . . . . . . . . . . . . .
H . . . . . . . . . . . . . . . . . . . . .
I . . . . . . . . . . . . . . . . . . . . .
J . . . . . . . . . . . . . . . . . . . . .
K . . . . . . . . . . . . . . . . . . . . .
L . . . . . . . . . . . . . . . . . . . . .
M . . . . . . . . . . . . . . . . . . . . . N . . . . . . . . . . . . . . . . . . . . .
O . . . . . . . . . . . . . . . . . . . . .
P . . . . . . . . . . . . . . . . . . . . .
Q . . . . . . . . . . . . . . . . . . . . .
R . . . . . . . . . . . . . . . . . . . . .
S . . . . . . . . . . . . . . . . . . . . .
T . . . . . . . . . . . . . . . . . . . . .
U . . . . . . . . . . . . . . . . . . . . .
V . . . . . . . . . . . . . . . . . . . . .
W . . . . . . . . . . . . . . . . . . . . . X . . . . . . . . . . . . . . . . . . . . .
Y . . . . . . . . . . . . . . . . . . . . .
Z . . . . . . . . . . . . . . . . . . . . .
58
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco TIM
bag
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(metric)Size
(imperial equiv.) TIMco CodeBag Qty TIMco Code
Bag Qty
3.5 x 15 6 x 5/8 35015CHYP 45 35015CHYB 7503.5 x 30 6 x 1 1/4 35030CHYP 35 35030CHYB 5004.0 x 25 8 x 1 40025CHYP 30 40025CHYB 4704.0 x 30 8 x 1 1/4 40030CHYP 25 40030CHYB 4304.0 x 35 8 x 1 3/8 40035CHYP 22 40035CHYB 3804.0 x 40 8 x 1 1/2 40040CHYP 20 40040CHYB 3504.0 x 50 8 x 2 40050CHYP 16 40050CHYB 2804.0 x 60 8 x 2 1/2 40060CHYP 12 40060CHYB 2305.0 x 40 10 x 1 1/2 50040CHYP 10 50040CHYB 2305.0 x 50 10 x 2 50050CHYP 12 50050CHYB 1805.0 x 60 10 x 2 1/2 50060CHYP 10 50060CHYB 1605.0 x 70 10 x 2 3/4 50070CHYP 8 50070CHYB 1405.0 x 80 10 x 3 50080CHYP 6 50080CHYB 120
5.0 x 100 10 x 4 50100CHYP 4 50100CHYB 906.0 x 80 12 x 3 60080CHYP 4 60080CHYB 90
6.0 x 120 12 x 4 3/4 60120CHYP 2 60120CHYB 506.0 x 150 12 x 6 60150CHYP 2 60150CHYB 35
Chipboard Zinc and Yellow Passivated Cross-Recess Double Countersunk
Screws
3.5 x 30 6 x 1 1/4 35030CHSSP 30 - -4.0 x 25 8 x 1 40025CHSSP 25 - -4.0 x 30 8 x 1 1/4 40030CHSSP 20 - -4.0 x 40 8 x 1 1/2 40040CHSSP 15 - -4.0 x 50 8 x 2 40050CHSSP 14 - -5.0 x 50 10 x 2 50050CHSSP 10 - -5.0 x 60 10 x 2 1/2 50060CHSSP 8 - -5.0 x 70 10 x 2 3/4 50070CHSSP 7 - -5.0 x 80 10 x 3 50080CHSSP 6 - -
5.0 x 100 10 x 4 50100CHSSP 4 - -
Chipboard A2 Stainless Steel Cross-Recess Double Countersunk
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(imperial)Size
(metric equiv.) TIMco CodeBag Qty TIMco Code
Bag Qty
6 x 5/8 3.5 x 15 00658CWZP 45 00658CWZB 7006 x 3/4 3.5 x 20 00634CWZP 40 00634CWZB 620
6 x 1 3.5 x 25 00061CWZP 35 00061CWZB 5008 x 3/4 4.0 x 20 00834CWZP 35 00834CWZB 540
8 x 1 4.0 x 25 00081CWZP 30 00081CWZB 4708 x 1 1/4 4.0 x 30 08114CWZP 25 08114CWZB 3908 x 1 1/2 4.0 x 40 08112CWZP 20 08112CWZB 350
8 x 2 4.0 x 50 00082CWZP 16 00082CWZB 2708 x 2 1/2 4.0 x 60 08212CWZP 12 08212CWZB 200
8 x 3 4.0 x 80 00083CWZP 10 00083CWZB 18010 x 1 1/2 5.0 x 40 10112CWZP 15 10112CWZB 250
10 x 2 5.0 x 50 00102CWZP 12 00102CWZB 19010 x 2 1/2 5.0 x 60 10212CWZP 10 10212CWZB 160
10 x 3 5.0 x 80 00103CWZP 8 00103CWZB 14010 x 4 5.0 x 100 00104CWZP 6 00104CWZB 90
Twin-Threaded Woodscrews Cross-Recess Double Countersunk - Zinc
Screws
6 x 1 3.5 x 25 00061BJCP 20 - -8 x 1 4.0 x 25 00081BJCP 15 - -
8 x 1 1/2 4.0 x 40 08112BJCP 10 - -10 x 1 1/2 5.0 x 40 10112BJCP 8 - -
Blackjax™ ScrewsCross-Recess Roundhead
8 x 11/4 4.0 x 30 08114CMIRP 10 - -8 x 11/2 4.0 x 40 08112CMIRP 8 - -
Chrome Mirror Screwswith Rubber Washer
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(Metric) TIMco CodeBag Qty TIMco Code
Bag Qty
Drywall
3.5 x 32 Fine - - 00032DRYB 4003.5 x 38 Fine - - 00038DRYB 3503.5 x 42 Fine - - 00042DRYB 3203.5 x 50 Fine - - 00050DRYB 2503.5 x 60 Fine - - 00060DRYB 2004.2 x 75 Fine - - 00075DRYB 1304.2 x 90 Fine - - 00090DRYB 703.5 x 32 Coarse - - 00032DRYCB 4003.5 x 38 Coarse - - 00038DRYCB 3503.5 x 50 Coarse - - 00050DRYCB 250
Drywall Screws Black
3.5 x 32 Self Drill - - 00032PSDDB 4003.5 x 42 Self Drill - - 00042PSDDB 320
Drywall Screws Self Drilling - Zinc
TITLE
59
5 Bags Per Carton* 5 Bags Per Carton*
6 x 1 3.5 x 25 00061CBWP 20 - -8 x 1 4.0 x 25 00081CBWP 15 - -
8 x 1 1/2 4.0 x 40 08112CBWP 10 - -10 x 1 1/2 5.0 x 40 10112CBWP 8 - -
Topbrass™ Solid Brass Cross-Recess Double Countersunk
Screws
59
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIM
co TIMbag - SCREW
S
8 x 3/8 CR3 Zinc 00838CFAZP 16 - -8 x 1/2 CR3 Zinc 00812CFAZP 16 - -8 x 3/4 CR3 Zinc 00834CFAZP 14 - -
8 x 1 CR3 Zinc 00081CFAZP 12 - -
Cross Flange Self Tapping Screws
6 x 3/4 CR3 Zinc 00634CCAZP 25 - -8 x 1/2 CR3 Zinc 00812CCAZP 22 - -8 x 3/4 CR3 Zinc 00834CCAZP 20 - -
8 x 1 CR3 Zinc 00081CCAZP 18 - -8 x 1 1/4 CR3 Zinc 08114CCAZP 16 - -8 x 1 1/2 CR3 Zinc 08112CCAZP 14 - -
10 x 1 1/4 CR3 Zinc 10114CCAZP 10 - -
Cross Countersunk Self Tapping Screws
5.5 x 25 Silver Ruspert - - L25W16BB 495.5 x 32 Silver Ruspert - - L32W16BB 495.5 x 38 Silver Ruspert - - L38W16BB 495.5 x 50 Silver Ruspert - - L50W16BB 49
Light Duty Self Drilling Screws with 16mm WashersHex Head
4.8 x 38 Silver Ruspert - - LW38BB 355.5 x 50 Silver Ruspert - - LW50BB 355.5 x 65 Silver Ruspert - - LW65BB 35
Wing Tip Self DrillingScrewsPhillips Recess
6.3 x 32 Silver Ruspert - - DS32W16BB 456.3 x 45 Silver Ruspert - - DS45W16BB 45
5.5 x 38 Silver Ruspert - - H38W16BB 49
Heavy Duty Self Drilling Screws with 16mm WashersHex Head
6.3 x 25 Silver Ruspert - - S25W16BB 22
Stitching ScrewsFor Light Section Steel
6.7 x 95 95INDEXWP 6 95INDEXWB 506.7 x 125 125INDEXWP 5 125INDEXWB 306.7 x 150 150INDEXWP 4 150INDEXWB 20
Wafer Head In-Dex ScrewsOlive Green Plating - Includes T30 TIM Drive Bit
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(Metric) TIMco CodeBag Qty TIMco Code
Bag Qty
6.7 x 100 100INDEXP 6 100INDEXTB 506.7 x 150 150INDEXP 4 150INDEXTB 306.7 x 200 - - 200INDEXTB 20
Hex Head In-Dex ScrewsOlive Green Plating
In-Dex
4.5 x 50 - - 50DEXTB 1754.5 x 65 - - 65DEXTB 1454.5 x 75 - - 75DEXTB 120
In-Dex Decking ScrewsCross-Recess - Olive Green Plating
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(Metric)Finish
TIMco CodeBag Qty TIMco Code
Bag Qty
5.5 x 25 Silver Ruspert - - L25BB 355.5 x 32 Silver Ruspert - - L32BB 355.5 x 38 Silver Ruspert - - L38BB 355.5 x 50 Silver Ruspert - - L50BB 355.5 x 70 Silver Ruspert - - L70BB 35
Light Duty Self DrillingScrewsHex Head
RoofingScrews
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(Imperial)Finish
TIMco CodeBag Qty TIMco Code
Bag Qty
Self Tapping
6 x 1/4 CR3 Zinc 00614CPAZP 30 - -6 x 3/8 CR3 Zinc 00638CPAZP 25 - -6 x 1/2 CR3 Zinc 00612CPAZP 20 - -6 x 3/4 CR3 Zinc 00634CPAZP 18 - -8 x 3/8 CR3 Zinc 00838CPAZP 16 - -8 x 1/2 CR3 Zinc 00812CPAZP 16 - -8 x 5/8 CR3 Zinc 00858CPAZP 14 - -8 x 3/4 CR3 Zinc 00834CPAZP 14 - -
8 x 1 CR3 Zinc 00081CPAZP 12 - -10 x 1/2 CR3 Zinc 01012CPAZP 10 - -10 x 5/8 CR3 Zinc 01058CPAZP 10 - -10 x 3/4 CR3 Zinc 01034CPAZP 10 - -
Cross Pan Self Tapping Screws
Timber Screws with 16mm WashersHex Head
Technical data and installation guidelines for all TIMbag Self Drilling Screws,are on pages 29-33.
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size
(Metric)Finish
TIMco CodeBag Qty TIMco Code
Bag Qty
6 Brass 6BCUPP 60 - -8 Brass 8BCUPP 55 - -
10 Brass 10BCUPP 50 - -6 Nickel 6NCUPP 60 - -8 Nickel 8NCUPP 55 - -
10 Nickel 10NCUPP 50 - -
Surface Screw Cups Brass or Nickel Finish
Cups
*Minimum order quantity of one carton. For more technical information please see pages 10-3360
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco TIM
bag - SCREWS
6.0 x 40 60040HFP 10 60040HFB 1356.0 x 60 60060HFP 10 60060HFB 1006.0 x 80 60080HFP 10 60080HFB 80
8.0 x 100 80100HFP 8 80100HFB 40
Nylon Hammer Fixings **
6 x 60 - - 00660ENB 906 x 80 - - 00680ENB 708 x 90 - - 00890ENB 40
8 x 110 - - 08110ENB 358 x 150 - - 08150ENB 30
Express Nails
8.0 x 80 08080NFFP 5 08080NFFB 508.0 x 100 08100NFFP 4 08100NFFB 40
10.0 x 100 10100NFFP 3 10100NFFB 3010.0 x 120 10120NFFP 2 10120NFFB 25
Nylon Frame Fixings **
10 Bags Per Carton* 5 Bags Per Carton*
M5 x 45 50037CAP 4 50037CAB 70M5 x 60 50052CAP 3 50052CAB 60
Metal Cavity Anchors **
10 Bags Per Carton* 5 Bags Per Carton*
31.5 TBAZSP 5 TBAZSB 75
Metal Speed Plugs with 4.5 x 30 Screws
M6 x 10 0610LSHP 4 0610LSHB 48M6 x 25 0625LSHP 4 0625LSHB 46M8 x 10 0810LSHP 4 0810LSHB 26M8 x 25 0825LSHP 4 0825LSHB 24M8 x 40 0840LSHP 4 0840LSHB 22
M10 x 10 1010LSHP 4 1010LSHB 22M10 x 25 1025LSHP 2 1025LSHB 16M10 x 50 1050LSHP 2 1050LSHB 14M10 x 75 1075LSHP 2 1075LSHB 14M12 x 60 1260LSHP 2 1260LSHB 10
Loose Bolt Shield Anchor **
M8 x 25 0825PSHP 4 0825PSHB 26M8 x 60 0860PSHP 4 0860PSHB 22
M10 x 15 1015PSHP 2 1015PSHB 16M10 x 30 1030PSHP 2 1030PSHB 15M10 x 60 1060PSHP 2 1060PSHB 14M12 x 30 1230PSHP 2 1230PSHB 8
Projecting Bolt Shield Anchor **
M6 06EYEP 2 06EYEB 18M8 08EYEP 2 08EYEB 14
Eye with Shield
M6 06HOOKP 2 06HOOKB 20M8 08HOOKP 2 08HOOKB 16
Hook with Shield
TIMpac
TIMbag
5 Bags Per Carton* 5 Bags Per Carton* Size
(metric) TIMco CodeBag Qty TIMco Code
Bag Qty
7.5 x 80 00080TCONP 5 00080TCONB 657.5 x 100 00100TCONP 4 00100TCONB 557.5 x 120 00120TCONP 3 00120TCONB 457.5 x 150 00150TCONP 2 00150TCONB 30
Multi-Fix Screws ** Concrete Screw - Includes T30 TIM Drive Bit
Light TIMpac
TIMbag
5 Bags Per Carton* 5 Bags Per Carton* Size
(metric) TIMco CodeBag Qty TIMco Code
Bag Qty
M8 x 50 0850TBP 4 0850TBB 40M10 x 100 10100TBP 2 10100TBB 18M12 x 100 12100TBP 2 12100TBB 12M12 x 140 12140TBP 2 12140TBB 10M12 x 180 - - 12180TBB 8
Throughbolts Zinc Plated **
Heavy
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIM
co TIMbag - A
NCH
ORS
Anchors, Fixings and Fasteners
61
TIMpac
TIMbag
5 Bags Per Carton* 5 Bags Per Carton* Size(mm)
A/F (mm) TIMco Code
Bag Qty TIMco Code
Bag Qty
TIMpac
TIMbag
5 Bags Per Carton* 5 Bags Per Carton* Size(mm)
A/F (mm) TIMco Code
Bag Qty TIMco Code
Bag Qty
6 x 60 10 0660CSCNP 2 0660CSCNB 406 x 80 10 0680CSCNP 2 0680CSCNB 30
8 x 100 13 08100CSCNP 2 08100CSCNB 12
M6 x 16 10 616SNZP 8 616SNZB 130M6 x 20 10 620SNZP 8 620SNZB 115M6 x 25 10 625SNZP 6 625SNZB 100M6 x 50 10 650SNZP 4 650SNZB 70M8 x 20 13 820SNZP 6 820SNZB 60M8 x 25 13 825SNZP 4 825SNZB 55M8 x 40 13 840SNZP 2 840SNZB 45M8 x 50 13 850SNZP 2 850SNZB 40M8 x 70 13 870SNZP 2 870SNZB 30
M10 x 25 17 1025SNZP 2 1025SNZB 35M10 x 30 17 1030SNZP 2 1030SNZB 32M10 x 40 17 1040SNZP 2 1040SNZB 28M10 x 50 17 1050SNZP 2 1050SNZB 25M10 x 70 17 1070SNZP 2 1070SNZB 20
M10 x 100 17 10100SNZP 2 10100SNZB 16M12 x 25 19 1225SNZP 2 1225SNZB 25M12 x 30 19 1230SNZP 2 1230SNZB 23M12 x 35 19 1235SNZP 2 1235SNZB 22M12 x 40 19 1240SNZP 2 1240SNZB 20M12 x 50 19 1250SNZP 2 1250SNZB 18M12 x 70 19 1270SNZP 2 1270SNZB 14
M12 x 100 19 12100SNZP 2 12100SNZB 10
Coach Screws - (DIN571) with Nylon Plug
Metric H/T Set Screws (DIN933) with Hex Nuts - (DIN934) Fully Threaded
6 x 50 10 0650CSCP 10 0650CSCB 1206 x 70 10 0670CSCP 10 0670CSCB 100
6 x 100 10 06100CSCP 10 06100CSCB 708 x 50 13 0850CSCP 5 0850CSCB 758 x 60 13 0860CSCP 5 0860CSCB 658 x 80 13 0880CSCP 5 0880CSCB 48
8 x 100 13 08100CSCP 5 08100CSCB 4010 x 50 17 1050CSCP 4 1050CSCB 4510 x 80 17 1080CSCP 4 1080CSCB 30
10 x 150 17 10150CSCP 2 10150CSCB 18
M8 x 100 - 08100CBP 4 08100CBB 40M8 x 110 - 08110CBP 3 08110CBB 35M8 x 130 - 08130CBP 3 08130CBB 30M8 x 150 - 08150CBP 2 08150CBB 24M10 x 75 - 1075CBP 3 1075CBB 28
M10 x 100 - 10100CBP 2 10100CBB 24M10 x 120 - 10120CBP 2 10120CBB 20M10 x 130 - 10130CBP 2 10130CBB 20M10 x 150 - 10150CBP 2 10150CBB 14M10 x 180 - 10180CBP 2 10180CBB 12M10 x 200 - - - 10200CBB 10M12 x 100 - 12100CBP 2 12100CBB 14M12 x 130 - 12130CBP 2 12130CBB 12M12 x 150 - - - 12150CBB 10M12 x 200 - - - 12200CBB 5
M6 x 12 - 0612RBP 14 0612RBB 150M6 x 20 - 0620RBP 12 0620RBB 140M6 x 25 - 0625RBP 10 0625RBB 130M6 x 30 - 0630RBP 10 0630RBB 120M6 x 40 - 0640RBP 8 0640RBB 110M6 x 50 - 0650RBP 8 0650RBB 90M6 x 60 - 0660RBP 6 0660RBB 80M6 x 80 - 0680RBP 4 0680RBB 70
Coach Screws - (DIN571)
Cup Square Carriage Bolts (DIN603) & Hex Nut (DIN934)
Roofing Bolts & Square Nuts
Fasteners Fasteners
10 Bags Per Carton* 5 Bags Per Carton*
6 x 30 - 06NLPP 20 06NLPB 2008 x 40 - 08NLPP 10 08NLPB 100
10 x 50 - 10NLPP 5 10NLPB 70
Nylon Plugs
TIMbag
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
62 *Minimum order quantity of one carton. **For more technical information please see pages 38-54
TIMco TIM
bag - FASTEN
ERS & FIXIN
GS
TIMpac
10 Bags Per Carton* Size(mm) TIMco Code
Bag Qty
19 19SHBP 1525 25SHBP 1038 38SHBP 5
Round Cup Hooks Electro-Brass
Hooks
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size(mm) TIMco Code
Bag Qty TIMco Code
Bag Qty
TIMpac
TIMbag
10 Bags Per Carton* 5 Bags Per Carton* Size(mm)
A/F (mm) TIMco Code
Bag Qty TIMco Code
Bag Qty
Form A DIN 125 Washer
Hex Nuts (DIN934)
Washers
Nuts
5 Bags Per Carton* 5 Bags Per Carton*
M6 x 25 625WHPZP 10 625WHPZB 160M8 x 25 825WHPZP 8 825WHPZB 160
5 Bags Per Carton* 5 Bags Per Carton*
M10 x 50 x 50 x 3 1050WHSPZP 2 1050WHSPZB 30M12 x 50 x 50 x 3 1250WHSPZP 2 1250WHSPZB 30
Penny/Repair Washer
Square Plate Washer
Nylon Insert Nuts - Type P (DIN982)
M6 6WHAZP 60 6WHAZB 500M8 8WHAZP 30 8WHAZB 350
M10 10WHAZP 20 10WHAZB 200M12 12WHAZP 10 12WHAZB 130M16 16WHAZP 8 16WHAZB 75M20 20WHAZP 4 20WHAZB 50
M6 10 6HNUTZP 40 6HNUTZB 600M8 13 8HNUTZP 30 8HNUTZB 300
M10 17 10HNUTZP 20 10HNUTZB 130M12 19 12HNUTZP 10 12HNUTZB 90M16 24 16HNUTZP 4 16HNUTZB 45M20 30 20HNUTZP 2 20HNUTZB 20
M6 10 6NPP 20 6NPB 300M8 13 8NPP 10 8NPB 300
M10 17 10NPP 4 10NPB 130M12 19 12NPP 4 12NPB 90M16 24 16NPP 2 16NPB 45
Picture Hooks & Hardened Nails - Picture Wire
3.5 dia Wire 35BWP 1No 2 Hook Single 2PHSP 12No 3 Hook Double 3PHDP 4
No 2 & No 3 Mixed MPHP 8
25 25SHWP 638 38SHWP 4
Round Cup Hooks White
25 25SQBP 1638 38SQBP 8
Square Cup Hooks Electro-Brass
4.3 x 75 75VEP 44.3 x 100 100VEP 2
Vine Eyes Zinc
30 30SEP 1540 40SEP 1045 45SEP 555 55SEP 4
Screw Eyes Zinc
60 60SHP 480 80SHP 3
100 100SHP 2
Screw Hooks Zinc
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
63
TIMco TIM
bag - NU
TS, WA
SHERS &
HO
OKS
Nuts, Washers and Hooks
*Minimum order quantity of one carton. 63
Panel Pins - Bright
Oval - Bright
Cut Clasp Nails - Bright
Cut Flooring Brads - Bright
Round Lost Head - Bright
Round Wire - Bright
Annular Ringshank - Bright
Bright
25 1.60 BPP25MB BPP25B BPP25LB BPP25T - BPP2530 1.60 BPP30MB BPP30B BPP30LB BPP30T - BPP3040 1.60 BPP40MB BPP40B BPP40LB BPP40T - BPP4050 1.60 BPP50MB BPP50B BPP50LB BPP50T - BPP50
40 2.65 BRW40MB BRW40B BRW40LB BRW40T BRW40LT BRW4050 2.65 BRW50MB BRW50B BRW50LB BRW50T BRW50LT BRW5065 3.35 BRW65MB BRW65B BRW65LB BRW65T BRW65LT BRW6575 3.75 BRW75MB BRW75B BRW75LB BRW75T BRW75LT BRW75
100 4.50 BRW100MB BRW100B BRW100LB BRW100T BRW100LT BRW100125 5.60 BRW125MB BRW125B BRW125LB BRW125T - BRW125150 6.00 BRW150MB BRW150B BRW150LB BRW150T - BRW150
40 - BON40MB BON40B BON40LB BON40T - BON4050 - BON50MB BON50B BON50LB BON50T - BON5065 - BON65MB BON65B BON65LB BON65T - BON6575 - BON75MB BON75B BON75LB BON75T - BON75
100 - BON100MB BON100B BON100LB BON100T - BON100
50 - BCN50MB BCN50B BCN50LB BCN50T - BCN5065 - BCN65MB BCN65B BCN65LB BCN65T - BCN6575 - BCN75MB BCN75B BCN75LB BCN75T - BCN75
100 - BCN100MB BCN100B BCN100LB BCN100T - BCN100
50 - CFB50MB CFB50B CFB50LB CFB50T - CFB5065 - CFB65MB CFB65B CFB65LB CFB65T - CFB65
40 2.36 BLH40MB BLH40B BLH40LB BLH40T - BLH4050 3.00 BLH50MB BLH50B BLH50LB BLH50T - BLH5065 3.35 BLH65MB BLH65B BLH65LB BLH65T - BLH65
500gBag
1kgBag
2.5kgBag 2.5kg
Tub10kgTub
25kgBox
Length (mm)
0 (mm)
5 Bags Per Carton* 5 Bags Per Carton* 4 Bags Per Carton* 4 Tubs Per Carton* 2 Tubs Per Carton* 1 Carton*TIMco Code TIMco Code TIMco Code TIMco Code TIMco Code TIMco Code
20 2.00 BAR20MB BAR20B BAR20LB BAR20T - BAR2025 2.00 BAR25MB BAR25B BAR25LB BAR25T - BAR2530 2.36 BAR30MB BAR30B BAR30LB BAR30T - BAR3040 2.36 BAR40MB BAR40B BAR40LB BAR40T - BAR4050 2.65 BAR50MB BAR50B BAR50LB BAR50T - BAR5065 3.35 BAR65MB BAR65B BAR65LB BAR65T - BAR6575 3.75 BAR75MB BAR75B BAR75LB BAR75T - BAR75
TIMco's loose nail range utilise the versatility of the TIMbags and TIMtubs to give
a robust and convenient packaging to transport,
store and use on site.
Product Visibility
Portable
Re-Sealable
Water Resistant
Tamper Proof
64
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
NailsTIMco
*Minimum order quantity of one carton.
Nails and Straps
64
Round Wire - Galvanised
13 3.00 GEC13MB GEC13B GEC13LB GEC13T GEC13LT GEC1320 3.00 GEC20MB GEC20B GEC20LB GEC20T GEC20LT GEC2025 3.00 GEC25MB GEC25B GEC25LB GEC25T - GEC2530 3.00 GEC30MB GEC30B GEC30LB GEC30T - GEC3040 3.00 GEC40MB GEC40B GEC40LB GEC40T - GEC4050 3.00 GEC50MB GEC50B GEC50LB GEC50T - GEC50
50 5.40 DSN50MB DSN50B DSN50LB DSN50T - DSN5065 5.40 DSN65MB DSN65B DSN65LB DSN65T - DSN6575 5.40 DSN75MB DSN75B DSN75LB DSN75T - DSN75
100 5.40 DSN100MB DSN100B DSN100LB DSN100T - DSN100125 6.40 DSN125MB DSN125B DSN125LB DSN125T - DSN125150 6.40 DSN150MB DSN150B DSN150LB DSN150T - DSN150
65 3.35 GSN65MB GSN65B GSN65LB GSN65T - GSN65(10kg Carton)
20 2.00 PPS20MB PPS20B PPS20LB PPS20T - PPS2025 2.65 PPS25MB PPS25B PPS25LB PPS25T - PPS2540 4.00 PPS40MB PPS40B PPS40LB PPS40T - PPS4050 4.00 PPS50MB PPS50B PPS50LB PPS50T - PPS50
30 3.75 GST30MB GST30B GST30LB GST30T GST30LT GST3040 3.75 GST40MB GST40B GST40LB GST40T - GST40
30 2.65 JPN30MB JPN30B JPN30LB JPN30T - JPN3040 2.65 JPN40MB JPN40B JPN40LB JPN40T - JPN40
500gBag
1kgBag
2.5kgBag 2.5kg
Tub10kgTub
25kgBox
Length (mm)
0 (mm)
5 Bags Per Carton* 5 Bags Per Carton* 4 Bags Per Carton* 4 Tubs Per Carton* 2 Tubs Per Carton* 1 Carton*TIMco Code TIMco Code TIMco Code TIMco Code TIMco Code TIMco Code
40 2.65 GRW40MB GRW40B GRW40LB GRW40T GRW40LT GRW4050 2.65 GRW50MB GRW50B GRW50LB GRW50T GRW50LT GRW5065 2.65 GRW26565MB GRW26565B GRW26565LB GRW26565T GRW26565LT GRW2656565 3.35 GRW65MB GRW65B GRW65LB GRW65T GRW65LT GRW6575 3.75 GRW75MB GRW75B GRW75LB GRW75T GRW75LT GRW75
100 4.50 GRW100MB GRW100B GRW100LB GRW100T GRW100LT GRW100125 5.60 GRW125MB GRW125B GRW125LB GRW125T - GRW125150 6.00 GRW150MB GRW150B GRW150LB GRW150T - GRW150
25 2.65 GCN25MB GCN25B GCN25LB GCN25T - GCN2530 2.65 GCN30MB GCN30B GCN30LB GCN30T GCN30LT GCN3040 2.65 GCN40MB GCN40B GCN40LB GCN40T GCN40LT GCN4040 3.35 GCN33540MB GCN33540B GCN33540LB GCN33540T - GCN3354050 3.35 GCN33550MB GCN33550B GCN33550LB GCN33550T - GCN3355050 2.65 GCN50MB GCN50B GCN50LB GCN50T - GCN5065 2.65 GCN26565MB GCN26565B GCN26565LB GCN26565T - GCN2656565 3.75 GCN65MB GCN65B GCN65LB GCN65T - GCN6575 3.75 GCN75MB GCN75B GCN75LB GCN75T - GCN75
Galvanised
Square Twist - Galvanised
Jagged Plasterboard - Galvanised
Presser Point Staples - Galvanised
Clout - Galvanised
ELH Clout - Galvanised
Drive Screw - Galvanised
Spring Head - Galvanised
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
65
TIMco N
AILS
*Minimum order quantity of one carton.
40 2.65 SAR40MB SAR40B SAR40LB SAR40T SAR4050 2.65 SAR50MB SAR50B SAR50LB SAR50T SAR5065 3.35 SAR65MB SAR65B SAR65LB SAR65T SAR6575 3.75 SAR75MB SAR75B SAR75LB SAR75T SAR75
100 5.0 SAR100MB SAR100B SAR100LB SAR100T SAR100
Annular Ringshank - Sherardised
SherardisedPanel Pins - Sherardised
500gBag
1kgBag
2.5kgBag 2.5kg
Tub25kgBox
Length (mm)
0 (mm)
5 Bags Per Carton* 5 Bags Per Carton* 4 Bags Per Carton* 4 Tubs Per Carton* 1 Carton*TIMco Code TIMco Code TIMco Code TIMco Code TIMco Code
25 1.60 SPP25MB SPP25B - - SPP2530 1.60 SPP30MB SPP30B - - SPP3040 1.60 SPP40MB SPP40B - - SPP4050 2.00 SPP50MB SPP50B - - SPP50
MasonryZinc Plated
100Pcs
Length (mm)
0 (mm)
1 Carton*TIMco Code
25 2.5 HM2502530 2.5 HM2503035 2.5 HM2503540 2.5 HM2504050 2.5 HM2505040 3.0 HM3004050 3.0 HM3005060 3.0 HM3006065 3.0 HM3006565 3.5 HM3506575 3.5 HM3507585 3.5 HM35085
100 3.5 HM350100
Clout - Aluminium
250gBag
1kgBag 1kg
Tub
Length (mm)
0 (mm)
5 Bags Per Carton* 5 Bags Per Carton* 4 Tubs Per Carton*TIMco Code TIMco Code TIMco Code
30 2.65 ACN30B ACN30LB ACN30T40 3.35 ACN40B ACN40LB ACN40T50 3.35 ACN50B ACN50LB ACN50T65 3.35 ACN65B ACN65LB ACN65T
Aluminium
Copper
Copper Straps - Copper
10Pcs
100Pcs
Length (mm)
Width (mm)
5 Bags Per Carton* 5 Bags Per Carton*TIMco Code TIMco Code
150 13 CSS150P CSS150B
CopperClout - Copper
25 2.65 COP225MB COP225B COP225LB COP225T -25 3.35 COP325MB COP325B COP325LB COP325T -30 2.65 COP230MB COP230B COP230LB COP230T -30 3.35 COP330MB COP330B COP330LB COP330T -38 2.65 COP238MB COP238B COP238LB COP238T -38 3.35 COP338MB COP338B COP338LB COP338T -50 3.35 COP350MB COP350B COP350LB COP350T -
Ideal for use with slates and shingles
Ideal for use with slates and shingles
Ideal for use in highly corrosive environments
66
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco N
AILS
*Minimum order quantity of one carton.
TIMco Shield Protective Films
TIMco Code TIMco Description Size Number of rolls in a dispensing carton *Minimum order qty
25CP TIMco Shield Protective Carpet Film # 0.05mm x 0.6m x 25m 9*50CP TIMco Shield Protective Carpet Film # 0.05mm x 0.6m x 50m 9*100CP TIMco Shield Protective Carpet Film # 0.05mm x 0.6m x 100m 6*
25HP TIMco Shield Protective Hard Surface Film 0.05mm x 0.6m x 25m 9*50HP TIMco Shield Protective Hard Surface Film 0.05mm x 0.6m x 50m 9*
25WP TIMco Shield Protective Glass Film 0.05mm x 0.6m x 25m 9*50WP TIMco Shield Protective Glass Film 0.05mm x 0.6m x 50m 9*
PROTECTIVE FILMS
TIMco shield protective film is a highly effective self-adhesive product, giving protection from foot traffic, debris, spills etc during decoration and building works, and is also useful for furniture removals, and parties. Protective film for glass gives highly effective protection to both internal and external windows from plaster and paint splashes etc during building and decoration works.
Easy to apply, the film can be left for up to 30 days before simple removal.
Ideal protection from spillages, debris, heavy foot traffic, decoration, furniture removal and parties
Key points:• Easy to apply• Lightweight and
waterproof• Slip proof surface• Easily removed• No adhesive left on
the surface
Each roll is colour coded for clear identification between applications:Yellow = Carpet #, Green = Hard Surface**, Blue = Glass.
TIMco Shield ProtectiveGlass Film
TIMco Shield ProtectiveHard Surface Film**
TIMco Shield ProtectiveCarpet Film #
# Designed for use on synthetic carpets only. Do NOT use with wool or oriental carpets. Not suitable for use on rugs, worn carpets or loose fitted carpet tiles. ** Not suitable for use on marble.
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
67
The TIMco FirmaHold Collated Clipped Head Nails carry the
mark in compliance with the Construction Products Regulations
(Eurocode 5 EN1995-1-1) and have been independently tested by BM TRADA
FirmaHold collated nails and fuel cells are designed for the fixing of a wide range of timber applications, using various types of pneumatic and cordless nailing tools.
• FirmaHold collated nails are manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers.
• A comprehensive range of sizes including, 18 gauge and 16 gauge brads and clipped head nails, available in a choice of rust protection, including stainless steel.
• Offered either with or without fuel cells, FirmaHold collated nails provide a first class solution to a wide range of timber applications.
FirmaHold Finishes
• Bright – Service Class 1 with no rust protection
• FirmaGalv – Service Class 1 for light duty rust protection
• FirmaGalv Plus – Service Class 2 for medium duty rust protection
• Hot Dipped Galvanised (HDGV) – Service Class 3 for Heavy Duty Rust Protection
• Stainless Steel – Service Class 3 for External and Heavy duty rust Protection
What is Eurocode 5? Eurocode 5 is the new regulation for Timber Structures that replaces previous building regulations and stipulates that all nails must be manufactured to comply with BS EN: 14592.
To BS EN ISO 14592:2008
COLLATED NAILS & FUEL CELLS
68
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
What are Service Classes?
Within Eurocode 5, structural fasteners must comply to certain levels of rust protection, which are graded by Service Classes. The service classes are as follows:
SERVICE CLASS 1: For Internal use or where the moisture content of the timber will not exceed 12%. Fasteners conforming to Service Class 1 do not require any rust protective coatings.
SERVICE CLASS 2: For covered exterior applications where the timber is protected from direct wetting or where the timber moisture content does not exceed 20%. Nails conforming to Service Class 2 must have a minimum of 12 µm of Zinc.
SERVICE CLASS 3: External application and over 43 microns of hot dipped galvanised protection.
DESIGNED FOR USE IN CORDLESS GAS AND PNEUMATIC NAILERS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
69
Technical Data
GENERAL USES
Suitable for use in 34º cordless and pneumatic clipped head first fix nailers.
FEATURES
• Diamond Point for maximum penetration.
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times.
• High quality paper to increase performance and reduce risk of nail jam.
Shank Design:
Plain Shank: Low penetration resistance into all materials.
Part Ring Shank: Partially ringed shank to provide low penetration resistance and improved pull-out resistance.
Ring Shank: Provides a secure fixing with high pull-out resistance.
Coatings & Materials:
Bright (BR): Suitable for indoor applications. Conforms to eurocode 5 and service class 1.
FirmaGalv: Electro galvanised plating, suitable for indoor applications. Conforms to eurocode 5 and service class 1.
FirmaGalv Plus: Electro galvanised plating with 12 microns of zinc (Min), suitable for indoor, and covered outdoor applications. Conforms to eurocode 5 and service class 2.
Hot Dipped Galvanised (HDGV): Suitable for indoor and outdoor applications. Conforms to eurocode 5 and service class 3.
Stainless Steel (SS): A2 for external applications. Conforms to eurocode 5 and service class 3.
Ring ShankPlain Shank
Evaluation of Conformity Initial Type Testing at
Notified Test Laboratory 2389 for EN 14592 Timber Structures -
Dowel Type Fasteners - Requirements
TIMco Code
Dia. Length Coating Type
Shank Type Collation Angle
ServiceClass
Fuel CellQty
Box Qty Carton Qty
CBRT50G 2.8 50 Bright Ringed 34° 1 3 3,300 6,600*CFGT50G 2.8 50 FirmaGalv Ringed 34° 1 3 3,300 6,600*CPLT50G 2.8 50 FirmaGalv Plus Ringed 34° 2 3 3,300 6,600*CHDT50G 2.8 50 HDGV Ringed 34° 3 3 3,300 6,600*CBRT63G 2.8 63 Bright Ringed 34° 1 3 3,300 6,600*CFGT63G 2.8 63 FirmaGalv Ringed 34° 1 3 3,300 6,600*CPLT63G 2.8 63 FirmaGalv Plus Ringed 34° 2 3 3,300 6,600*CHDT63G 2.8 63 HDGV Ringed 34° 3 3 3,300 6,600*CPLT63RG 3.1 63 FirmaGalv Plus Ringed 34° 2 3 3,300 6,600*CBRT75G 3.1 75 Bright Ringed 34° 1 2 2,200 4,400*CFGT75G 3.1 75 FirmaGalv Ringed 34° 1 2 2,200 4,400*CPLT75G 3.1 75 FirmaGalv Plus Ringed 34° 2 2 2,200 4,400*CHDT75G 3.1 75 HDGV Ringed 34° 3 2 2,200 4,400*CFGT85PG 3.1 85 FirmaGalv Part Ring 34° 1 2 2,200 4,400*CBRT90G 3.1 90 Bright Plain 34° 1 2 2,200 4,400*CFGT90G 3.1 90 FirmaGalv Plain 34° 1 2 2,200 4,400*CPLT90G 3.1 90 FirmaGalv Plus Plain 34° 2 2 2,200 4,400*CHDT90G 3.1 90 HDGV Plain 34° 3 2 2,200 4,400*CPLT90PG 3.1 90 FirmaGalv Plus Part Ring 34° 2 2 2,200 4,400*
FirmaHold Clipped Head Nails - Trade Pack With Fuel Cells
TIMco Code
Dia. Length Coating Type
Shank Type Collation Angle
ServiceClass
Fuel CellQty
Box Qty Carton Qty
CFGR50G 2.8 50 FirmaGalv Ringed 34° 1 1 1,100 4,400*CFGR63G 2.8 63 FirmaGalv Ringed 34° 1 1 1,100 4,400*CFGR75G 3.1 75 FirmaGalv Ringed 34° 1 1 1,100 4,400*CFGR90G 3.1 90 FirmaGalv Plain 34° 1 1 1,100 4,400*CSSR50G 2.8 50 A2 SS Ringed 34° 3 1 1,100 4,400*CSSR63G 2.8 63 A2 SS Ringed 34° 3 1 1,100 4,400*
FirmaHold Clipped Head Nails - Retail Pack With Fuel Cells
TIMco Code
Dia. Length Coating Type
Shank Type Collation Angle
ServiceClass
Fuel CellQty
Box Qty Carton Qty
CBRT50 2.8 50 Bright Ringed 34° 1 - 3,300 6,600*CFGT50 2.8 50 FirmaGalv Ringed 34° 1 - 3,300 6,600*CPLT50 2.8 50 FirmaGalv Plus Ringed 34° 2 - 3,300 6,600*CBRT63 2.8 63 Bright Ringed 34° 1 - 3,300 6,600*CFGT63 2.8 63 FirmaGalv Ringed 34° 1 - 3,300 6,600*CPLT63 2.8 63 FirmaGalv Plus Ringed 34° 2 - 3,300 6,600*CPLT63R 3.1 63 FirmaGalv Plus Ringed 34° 2 - 3,300 6,600*CBRT75 3.1 75 Bright Ringed 34° 1 - 2,200 4,400*CFGT75 3.1 75 FirmaGalv Ringed 34° 1 - 2,200 4,400*CPLT75 3.1 75 FirmaGalv Plus Ringed 34° 2 - 2,200 4,400*CFGT85P 3.1 85 FirmaGalv Part Ring 34° 1 - 2,200 4,400*CBRT90 3.1 90 Bright Plain 34° 1 - 2,200 4,400*CFGT90 3.1 90 FirmaGalv Plain 34° 1 - 2,200 4,400*CFGT90P 3.1 90 FirmaGlav Part Ring 34° 1 - 2,200 4,400*CPLT90 3.1 90 FirmaGalv Plus Plain 34° 2 - 2,200 4,400*
FirmaHold Clipped Head Nails - Trade Pack Without Fuel Cells
* Minimum order quantity per size
TIMco Code
Dia. Length Coating Type
Shank Type Collation Angle
ServiceClass
Fuel CellQty
Box Qty Carton Qty
CFGR50 2.8 50 FirmaGalv Ringed 34° 1 - 1,100 4,400*CFGR63 2.8 63 FirmaGalv Ringed 34° 1 - 1,100 4,400*CFGR75 3.1 75 FirmaGalv Ringed 34° 1 - 1,100 4,400*CFGR90 3.1 90 FirmaGalv Plain 34° 1 - 1,100 4,400*CSSR50 2.8 50 A2 SS Ringed 34° 3 - 1,100 4,400*CSSR63 2.8 63 A2 SS Ringed 34° 3 - 1,100 4,400*
FirmaHold Clipped Head Nails - Retail Pack Without Fuel Cells
* Minimum order quantity per size
The TIMco FirmaHold Collated Clipped Head Nails carry the mark in compliance with the Construction Products Regulations (Eurocode 5 EN1995-1-1) and have been independently tested by BM TRADA
To BS EN ISO 14592:2008
70
FIRMA
HO
LD CLIPPED
HEA
D N
AILS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Technical Data
GENERAL USES
Suitable for use in cordless & pneumatic 16 & 18 gauge second fix brad nailers.
Nail & fuel cell packs.
FEATURES
• Diamond Point for maximum penetration.
• T Head to give concealed fixings.
• Shank Design: Low penetration resistance into all materials.
Coatings & Materials:
Galvanised: Electro galvanised plating, suitable for indoor applications.
Stainless Steel (SS): A2 Stainless Steel for high levels of corrosion resistance & use in hardwood.
• Sold in one-piece strengthened branded boxes.
TIMco Code
Gauge Length Coating Type
Collation Angle
NailsPer Strip
Fuel CellQty
Box Qty
BG1619G 16 19 Galvanised Straight 50 2 2,000BG1625G 16 25 Galvanised Straight 50 2 2,000BG1632G 16 32 Galvanised Straight 50 2 2,000BG1638G 16 38 Galvanised Straight 50 2 2,000BG1645G 16 45 Galvanised Straight 50 2 2,000BG1650G 16 50 Galvanised Straight 50 2 2,000BG1664G 16 64 Galvanised Straight 50 2 2,000BSS1638G 16 38 A2 SS Straight 50 2 2,000BSS1650G 16 50 A2 SS Straight 50 2 2,000
TIMco Code
Gauge Length Coating Type
Collation Angle
NailsPer Strip
Fuel CellQty
Box Qty
ABG1632G 16 32 Galvanised 20° 50 2 2,000ABG1638G 16 38 Galvanised 20° 50 2 2,000ABG1645G 16 45 Galvanised 20° 50 2 2,000ABG1650G 16 50 Galvanised 20° 50 2 2,000ABG1664G 16 64 Galvanised 20° 50 2 2,000ABSS1638G 16 38 A2 SS 20° 50 2 2,000ABSS1650G 16 50 A2 SS 20° 50 2 2,000
TIMco Code
Gauge Length Coating Type
Collation Angle
NailsPer Strip
Fuel CellQty
Box Qty
BG1619 16 19 Galvanised Straight 50 - 2,000BG1625 16 25 Galvanised Straight 50 - 2,000BG1632 16 32 Galvanised Straight 50 - 2,000BG1638 16 38 Galvanised Straight 50 - 2,000BG1645 16 45 Galvanised Straight 50 - 2,000BG1650 16 50 Galvanised Straight 50 - 2,000BG1664 16 64 Galvanised Straight 50 - 2,000BSS1638 16 38 A2 SS Straight 50 - 2,000BSS1650 16 50 A2 SS Straight 50 - 2,000
TIMco Code
Gauge Length Coating Type
Collation Angle
NailsPer Strip
Fuel CellQty
Box Qty
BG1816 18 16 Galvanised Straight 100 - 5,000BG1819 18 19 Galvanised Straight 100 - 5,000BG1825 18 25 Galvanised Straight 100 - 5,000BG1832 18 32 Galvanised Straight 100 - 5,000BG1838 18 38 Galvanised Straight 100 - 5,000BG1845 18 45 Galvanised Straight 100 - 5,000BG1850 18 50 Galvanised Straight 100 - 5,000
TIMco Code
Gauge Length Coating Type
Collation Angle
NailsPer Strip
Fuel CellQty
Box Qty
ABG1632 16 32 Galvanised 20° 50 - 2,000ABG1638 16 38 Galvanised 20° 50 - 2,000ABG1645 16 45 Galvanised 20° 50 - 2,000ABG1650 16 50 Galvanised 20° 50 - 2,000ABG1664 16 64 Galvanised 20° 50 - 2,000ABSS1638 16 38 A2 SS 20° 50 - 2,000ABSS1650 16 50 A2 SS 20° 50 - 2,000
16 Gauge Straight Brad Nails & Fuel Cell Pack
16 Gauge Angled Brad Nails & Fuel Cell Pack
16 Gauge Brad Nails
18 Gauge Brad Nails
16 Gauge Angled Brad Nails
FOR LOOSE NAILS PLEASE SEE
TIMbags ON PAGE 64
Straight Brad Nails Box
Angled Brad Nails Box
71
FIRMA
HO
LD BRA
D N
AILS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Key Features
• A4 stainless steel ring shanked
White Oak
Mahogany Black
Polymer Headed Pins
TIMco Code Finish Size (mm) Head 0 (mm) Box Qty Carton Qty
PP25M Mahogany 25mm 6.4 250 6,000PP25W White 25mm 6.4 250 6,000PP25BEIGE Beige 25mm 6.4 250 6,000PP30W White 30mm 6.4 250 6,000PP30O Oak 30mm 6.4 250 6,000PP30BR Mahogany 30mm 6.4 250 6,000PP30BL Black 30mm 6.4 250 6,000PP40W White 40mm 6.4 250 6,000PP40O Oak 40mm 6.4 250 6,000PP40BR Mahogany 40mm 6.4 250 6,000PP40BL Black 40mm 6.4 250 6,000
Polymer Headed Nails
TIMco Code Finish Size (mm) Head 0 (mm) Box Qty Carton Qty
PN40W White 40 12 100 6,000PN50W White 50 12 100 6,000PN50O Oak 50 12 100 6,000PN50BR Mahogany 50 12 100 6,000PN50BL Black 50 12 100 6,000PN65W White 65 12 100 6,000PN65BR Mahogany 65 12 100 6,000PN65BL Black 65 12 100 6,000
Clad Pins
TIMco Code Finish Size (mm) Head 0 (mm) Box Qty Carton Qty
CP30 N/A 30mm 4 250 6,000
• Manufactured In The UK • UV Stable
Polymer Headed
Nails
Polymer Headed
Pins
Clad Pins
• Impact Resistant
TIMco FirmaHold Fuel Cells
• Manufactured to European standards and CE approved for consistent quality.
• Cleaned propane and butane gas for cleaner combustion and improve the working environment.
• Fully synthetic oil for reduced carbon deposition.
• High quality propellant to prevent leakage and increase shelf life.
• Gas filled in accordance with European Regulations (75/324/EWG).
TIMco Code Description Blister Pack Qty
Carton Qty
Master Carton
Qty
CFC Framing Nailer Fuel Cell 2 12* 144BFC Finishing Nailer Fuel Cell 2 12* 144
Fuel Cells
* Minimum order quantity per size
72
FIRMA
HO
LD FU
EL CELLS, POLYM
ER HEA
DED
NA
ILS/PINS &
CLAD
PINS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
73
Addax Power Tool Accessories are high quality products, specified to meet the exact requirements of today's professional users.Be it problem solving solutions for difficult materials such as reinforced concrete, stainless steel or porcelain, Addax provides a range of drilling and cutting products to provide cost effective answers.
As a result of ongoing research and development over many years, Addax offers an excellent choice for both the Retailer and the Professional user alike.
Retailer BenefitsFor the retailer Addax utilises durable and attractive packaging from experts in both the UK and Europe, maximizing shelf life and protecting the product. Also available are bespoke merchandisers and modules designed to maximize the product display area and increase sales.
Extensive SafetyThe range includes tools to the following requirements and specifications:• PGM• EN12413• EN13236• oSa
74
High performance V flute for optimum dust extraction
Shot-peened for increased strength and durability
• A premium quality product, licensed and approved by the Prüfgemeinschaft Mauerbohrer e. V. (PGM) in Germany, and authorised for use with safety critical fixings
• Suitable for use in rotary hammers with the SDS plus tool system
Features UK sourced special Nickel Chromoly shank.
High quality European BC20 Tungsten Carbide tip.
Cold formed blanks utilised up to 11mm diameter.
Fully heat treated to eliminate bending.
Twin flute design for increased drilling performance.
Shot-peened for increased strength and durability.
P.G.M. approved and marked.
Large range of sizes to cover most drilling applications, including direct fix anchors.
User CautionRebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.
P.G.M. approved and marked
Professional SDS Hammer Bits
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm)
Pack Qty
Packs PerCarton
AP4110 4.0 50 110 1 10AP4160 4.0 100 160 1 10AP5110 5.0 50 110 1 10AP5160 5.0 100 160 1 10AP5210 5.0 150 210 1 10*AP55110 5.5 50 110 1 10*AP55160 5.5 100 160 1 10*AP55210 5.5 150 210 1 10AP6110 6.0 50 110 1 10AP6160 6.0 100 160 1 10AP6210 6.0 150 210 1 10AP6260 6.0 200 260 1 10AP6350 6.0 290 350 1 10*AP65110 6.5 50 110 1 10*AP65160 6.5 100 160 1 10*AP65210 6.5 150 210 1 10*AP65260 6.5 200 260 1 10AP7110 7.0 50 110 1 10AP7160 7.0 100 160 1 10AP7210 7.0 150 210 1 10AP7260 7.0 200 260 1 10AP8110 8.0 50 110 1 10AP8160 8.0 100 160 1 10AP8210 8.0 150 210 1 10AP8260 8.0 200 260 1 10AP8310 8.0 250 310 1 10AP8350 8.0 300 350 1 10AP8450 8.0 400 450 1 10AP9210 9.0 150 210 1 10AP10160 10.0 100 160 1 10AP10210 10.0 150 210 1 10AP10260 10.0 200 260 1 10AP10310 10.0 250 310 1 10AP10450 10.0 400 450 1 10AP10600 10.0 550 600 1 10AP101000 10.0 950 1000 1 10AP11160 11.0 100 160 1 10AP11310 11.0 250 310 1 10AP12160 12.0 100 160 1 10AP12210 12.0 150 210 1 10AP12260 12.0 200 260 1 10AP12310 12.0 250 310 1 10
P.G.M. markThis mark is an international symbol of quality for masonry bits, governed by the independent Prüfgemeinschaft Mauerbohrer e.V. (PGM). The mark guarantees that the bits are manufactured and tested to ensure dimensional precision and performance.
The DIBt (German Institute of Construction Technology) specifies that PGM marked drills should be used when geometrically exact holes are required for safety critical fixings.
Professional SDS Hammer Bits - Addax Plus Professional SDS Hammer Bits - Addax Plus
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm)
Pack Qty
Packs PerCarton
AP12450 12.0 400 450 1 10AP12600 12.0 550 600 1 10AP121000 12.0 950 1000 1 10AP13260 13.0 200 260 1 10AP14160 14.0 100 160 1 10AP14210 14.0 150 210 1 10AP14260 14.0 200 260 1 10AP14310 14.0 250 310 1 10AP14450 14.0 400 450 1 10AP141000 14.0 950 1000 1 10AP15260 15..0 182 260 1 10AP16160 16.0 100 160 1 10AP16210 16.0 150 210 1 10AP16260 16.0 182 260 1 10AP16310 16.0 232 310 1 10AP16450 16.0 400 450 1 10AP16600 16.0 550 600 1 10AP161000 16.0 950 1000 1 10AP18210 18.0 150 210 1 10AP18260 18.0 200 260 1 10AP18310 18.0 228 310 1 10AP18450 18.0 400 450 1 10AP19450 19.0 400 450 1 10AP20210 20.0 132 210 1 10AP20310 20.0 228 310 1 10AP20450 20.0 400 450 1 10AP20600 20.0 550 600 1 10AP201000 20.0 950 1000 1 10AP22260 22.0 180 260 1 10AP22450 22.0 400 450 1 10AP22600 22.0 550 600 1 10AP24260 24.0 180 260 1 10AP24450 24.0 400 450 1 10AP25260 25.0 180 260 1 10AP25450 25.0 400 450 1 10AP25600 25.0 550 600 1 10AP251000 25.0 950 1000 1 10AP26250 26.0 200 250 1 10
4 Cutter Head
*AP4R28450 28.0 400 450 1 5*AP4R30450 30.0 400 450 1 5
* Not PGM Approved.
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
75
Key Features
Materials
Fully heat treated to eliminate bending
High quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system.
Most popular sizes up to 600mm length
Shot blast finish for rust
protection
Tradesman SDS Hammer Bits
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm)
Pack Qty
Packs PerCarton
SDS4160 4.0 100 160 1 10SDS5110 5.0 50 110 1 10SDS5160 5.0 100 160 1 10SDS5210 5.0 150 210 1 10SDS55110 5.5 50 110 1 10SDS55160 5.5 100 160 1 10SDS55210 5.5 150 210 1 10SDS6110 6.0 50 110 1 10SDS6160 6.0 100 160 1 10SDS6210 6.0 150 210 1 10SDS6260 6.0 200 260 1 10SDS65110 6.5 50 110 1 10SDS65160 6.5 100 160 1 10SDS65210 6.5 150 210 1 10SDS65260 6.5 200 260 1 10SDS7110 7.0 50 110 1 10SDS7160 7.0 100 160 1 10SDS7210 7.0 150 210 1 10SDS8110 8.0 50 110 1 10SDS8160 8.0 100 160 1 10SDS8210 8.0 150 210 1 10SDS8260 8.0 200 260 1 10SDS8310 8.0 250 310 1 10SDS8450 8.0 400 450 1 10SDS10160 10.0 100 160 1 10SDS10210 10.0 150 210 1 10SDS10260 10.0 200 260 1 10SDS10310 10.0 250 310 1 10SDS10450 10.0 400 450 1 10SDS10600 10.0 550 600 1 10SDS12160 12.0 100 160 1 10SDS12210 12.0 150 210 1 10SDS12260 12.0 200 260 1 10SDS12310 12.0 250 310 1 10SDS12450 12.0 400 450 1 10SDS12600 12.0 550 600 1 10SDS14160 14.0 100 160 1 10SDS14210 14.0 150 210 1 10SDS14260 14.0 200 260 1 10SDS14310 14.0 250 310 1 10SDS14450 14.0 400 450 1 10SDS14600 14.0 550 600 1 10SDS16160 16.0 100 160 1 10SDS16210 16.0 150 210 1 10SDS16250 16.0 200 250 1 10SDS16300 16.0 250 300 1 10SDS16450 16.0 400 450 1 10SDS16600 16.0 550 600 1 10SDS18200 18.0 150 200 1 10SDS18260 18.0 200 260 1 10SDS18300 18.0 250 300 1 10SDS18450 18.0 400 450 1 10SDS20200 20.0 150 200 1 10SDS20300 20.0 250 300 1 10SDS20450 20.0 400 450 1 10SDS20600 20.0 550 600 1 10SDS22250 22.0 200 250 1 10SDS22450 22.0 400 450 1 10SDS25250 25.0 200 250 1 10SDS25450 25.0 400 450 1 10
ConcreteBlock StoneConcrete Brick
TRADESMAN
QUALITYPROFESSIONAL RANGE
ALSO AVAILABLE
A range of tools designed for use in rotation stop hammers with the SDS Plus tool holder system.
• Heat treated • Shot blast finish for rust protection
Addax SDS Plus Steels
TIMco Code
Description Width (mm)
Total Length (mm)
Pack Qty
Packs PerCarton
SDSP SDS Plus Point N/A 250 1 10 SDSC SDS Plus Chisel 20 250 1 10 SDSS SDS Plus Spade 40 250 1 10 SDSG SDS Plus Gouge 22 250 1 10 SDST SDS Plus Tile 40 250 1 10 SDSR SDS Plus Rake 28 250 1 10 SDSCOMB SDS Plus Comb 27 250 1 10
SDS Plus Steels - Key Features
ConcreteBlock StoneConcrete Brick
Point Tile GougeSpade Comb Rake
Materials
TRAD
ESMA
N SD
S PLUS H
AM
MER BITS
76
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
SDS M
AX
HA
MM
ER BITS A
ND
STEELS
SDS Max
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm) Pack Qty
Packs PerCarton
M12340 12 195 340 1 5M12540 12 395 540 1 5M14340 14 195 340 1 5M14540 14 395 540 1 5M16340 16 195 340 1 5M16540 16 395 540 1 5M18340 18 195 340 1 5M18540 18 395 540 1 5M18690 18 545 690 1 5M18920 18 775 920 1 5M20340 20 195 340 1 5M20540 20 395 540 1 5M20690 20 545 690 1 5M20920 20 775 920 1 5M22340 22 195 340 1 5M22540 22 395 540 1 5M22690 22 545 690 1 5M22920 22 775 920 1 5M24340 24 195 340 1 5M24540 24 395 540 1 5M25340 25 195 340 1 5M25540 25 395 540 1 5M25690 25 545 690 1 5M25920 25 775 920 1 5M26340 26 195 340 1 5M26540 26 395 540 1 5M28340 28 195 340 1 5M28540 28 395 540 1 5M30340 30 195 340 1 5M30540 30 395 540 1 5M32340 32 195 340 1 5M32540 32 395 540 1 5
Addax SDS Max Steels
TIMco Code
Description Width (mm)
Total Length (mm)
Pack Qty
Packs PerCarton
SDSMP280 SDS Max Point N/A 280 1 5 SDSMP400 SDS Max Point N/A 400 1 5 SDSMC280 SDS Max Chisel 25 280 1 5 SDSMC400 SDS Max Chisel 25 400 1 5 SDSMC40050 SDS Max Wide Chisel 50 400 1 5 SDSMC30075 SDS Max Extra Wide Chisel 75 300 1 5SDSMST SDS Max Carbide Insert Slotting Tool 25 280 1 10
Key Features
For drilling large diameter holes in concrete, stone and masonry. Suitable for use in large rotary hammers with the SDS max tool holder system.
Narrow angle 4-cutter head greatly reduces jamming and provides smooth drilling
Quality Nickel Chromoly shank
Shot peened for extra
strength and durability
77
ConcreteBlock StoneConcrete Brick
Materials
A range of tools designed for use in rotation stop hammers with the larger SDS max tool holder system.
• Heat treated
• Shot blast finish for rust protection
SDS Max Steels - Key Features
Point Chisel
Materials
ConcreteBlock StoneConcrete Brick
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Opposite support
Support
SDS-plus
STONE CONCRETE
BRICK
REINFORCED CONCRETE
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm)
Pack Qty
B6160 6.0 100 160 1B6210 6.0 150 210 1B6260 6.0 200 260 1B65160 6.5 100 160 1B65210 6.5 150 210 1B65260 6.5 200 260 1B7160 7.0 100 160 1B7210 7.0 150 210 1B8160 8.0 100 160 1B8210 8.0 150 210 1B8260 8.0 200 260 1B8460 8.0 400 460 1B10160 10.0 100 160 1B10210 10.0 150 210 1B10260 10.0 200 260 1B10310 10.0 250 310 1B10460 10.0 400 460 1B12210 12.0 150 210 1B12260 12.0 200 260 1B12310 12.0 250 310 1B12460 12.0 400 460 1B14160 14.0 100 160 1B14210 14.0 150 210 1B14260 14.0 200 260 1B14460 14.0 400 460 1B16210 16.0 150 210 1B16310 16.0 250 310 1B16460 16.0 400 460 1B18210 18.0 150 210 1B18310 18.0 250 310 1B18460 18.0 400 460 1B20210 20.0 150 210 1B20310 20.0 250 310 1B20460 20.0 400 460 1
3 cutting edges reduces the likelihood of the bit snagging on the rebar.
IN REINFORCED CONCRETE THE BOOSTER PLUS
MAKES THE DIFFERENCE
The Booster-Plus can drill through the reinforcing.
2 CutterThe bit 'rifles' as it drills, creating a tri-lobular hole rather than a round hole. This creates gaps around the anchor and reduces the tensile strength of the fixing.
The BoosterThe 120° three cutter head drills an almost perfectly round hole, fitting the anchor snugly and maximising the effectiveness of the fixing.
Head
Outside diameter of anchor to be inserted.
Shape of drilled hole
2 Cutter Tri-lobular
Hole
Outside diameter of anchor to be inserted. Booster
RoundHole
Shape of drilled hole
This unique square section flute combines efficient dust removal with reduced vibration, resulting in faster drilling speeds and greater comfort for the user.
Flute
21
Compression
Depression
78
Opposite support
Support
SDS-plus
Materials
Key Features
135° High Grade Industrial Carbide Tip
Special diamond ground carbide tip with 135° point angle
A premium quality masonry bit for use with impact or percussion drills fitted with a standard 1/2" 3 jaw chuck.
A premium quality masonry bit, for drilling through thin layers of different materials. Use with 1/2" 3 jaw chuck.
Ground flute
Silver/black finish
Ground flute
Silver and gold finish
High temperature
copper brazed
Heat treated
Heat treated
Professional Masonry Bits - Addax Pro
TIMco Code
Drill (mm)
Working Length (mm)
Total Length (mm)
Shank (mm)
Pack Qty
Packs PerCarton
APM475 4.0 40 75 4.0 1 10APM4150 4.0 87 150 4.0 1 10APM585 5.0 47 85 5.0 1 10APM5150 5.0 87 150 5.0 1 10APM5585 5.5 47 85 5.5 1 10APM55150 5.5 87 150 5.5 1 10APM6100 6.0 58 100 6.0 1 10APM6150 6.0 87 150 6.0 1 10APM6200 6.0 120 200 6.0 1 10APM6300 6.0 220 300 6.0 1 10APM65100 6.5 58 100 6.5 1 10APM65150 6.5 87 150 6.5 1 10APM65200 6.5 120 200 6.5 1 10APM65300 6.5 220 300 6.5 1 10APM7100 7.0 58 100 7.0 1 10APM7150 7.0 87 150 7.0 1 10APM7300 7.0 220 300 7.0 1 10APM8120 8.0 75 120 8.0 1 10APM8150 8.0 87 150 8.0 1 10APM8200 8.0 120 200 8.0 1 10APM8300 8.0 220 300 8.0 1 10APM10120 10.0 75 120 10.0 1 10APM10150 10.0 87 150 10.0 1 10APM10200 10.0 120 200 10.0 1 10APM10300 10.0 220 300 10.0 1 10APM10400 10.0 300 400 10.0 1 10APM12150 12.0 90 150 12.0 1 10APM12200 12.0 127 200 12.0 1 10APM12300 12.0 220 300 12.0 1 10APM12400 12.0 300 400 12.0 1 10APM14150 14.0 90 150 10.0 1 10APM14200 14.0 127 200 10.0 1 10APM14400 14.0 300 400 10.0 1 10APM16150 16.0 90 150 10.0 1 10APM16200 16.0 127 200 10.0 1 10APM16300 16.0 220 300 10.0 1 10APM16400 16.0 300 400 10.0 1 10APM20200 20.0 152 200 13.0 1 10APM20400 20.0 300 400 13.0 1 10APM25400 25.0 300 400 13.0 1 10
ConcreteBlock StoneConcrete Brick
TCT Multi-Purpose Drill Bits
TIMco Code
Drill 0 (mm)
Working Length (mm)
Total Length (mm)
Shank (mm)
Pack Qty
Packs PerCarton
MP585 5.0 55 85 5.0 1 10MP5150 5.0 87 150 5.0 1 10MP55100 5.5 58 100 5.5 1 10MP55150 5.5 87 150 5.5 1 10MP6100 6.0 58 100 6.0 1 10MP6150 6.0 87 150 6.0 1 10MP65100 6.5 58 100 6.5 1 10MP65150 6.5 87 150 6.5 1 10MP7100 7.0 58 100 7.0 1 10MP7150 7.0 87 150 7.0 1 10MP8150 8.0 87 150 8.0 1 10MP10150 10.0 87 150 10.0 1 10
Key Features
mm
Concrete Stone Brick
Pr
ofe
ssio
na
l M
aso
nr
y B
it
5
mm
Multi-purpose
Concrete StoneBrickBlocksMetalCast IronCeramic TilePlastic
TCT
MU
LTI-
PU
RP
OSE
BIT
6
79
PROFESSIO
NA
L MA
SON
RY BITS - A
DD
AX
PROTC
T MU
LTI-PURPO
SE DRILL B
ITS
Key Features
For accurate drilling of glass and ceramics. Use the bit in ROTARY MODE ONLY at a low rpm. A lubricant such as water or turpentine is recommended when drilling glass.
• Cross ground, spear shaped Tungsten Carbide tip
• Shot blast finish
The most popular rebar cutter in the U.S.A. for over 25 Years
PROVEN, RELIABLE AND EFFECTIVE.
For the rotary drilling of in-situ reinforcing bars embedded in concrete.
• High temperature brazing• Heavy duty Tungsten Carbide tips
• Made in the U.S.A.
IMPORTANT• Addax rotary rebar
cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY
• Drilling with the hammer action switched on will result in serious damage to the tool
• Please read the instructions and use the recommended r.p.m.’s
SDS Shank Rebar Cutters
Rebar Cutter - Head Only
SDS Plus Drive Adaptor For Rebar Cutter Head
TCT Tile & Glass Bits
TIMco Code
Drill (mm)
Working Length (mm)
Wallet Qty
Wallets PerCarton
TG5 5.0 60 1 10TG6 6.0 60 1 10TG65 6.5 75 1 10TG7 7.0 75 1 10TG8 8.0 75 1 10TG10 10.0 80 1 10
TIMco Code
Drill 0 (mm)
Working Length (mm)
Total Length (mm)
Rec. RPM
Packaging PackQty
MSRB10* 10.0 250 300 750-1000 Tube 1MSRB12* 12.0 250 300 600-850 Tube 1MSRB14* 14.0 250 300 600-850 Tube 1MSRB15* 15.0 250 300 600-850 Tube 1MSRB16 16.0 250 300 500-750 Tube 1MSRB18 18.0 250 300 500-750 Tube 1MSRB20 20.0 250 300 450-600 Tube 1
TIMco Code
Drill 0 (mm)
Working Length (head only)
(mm)
Working Length (inc. adaptor)
(mm)
Rec. RPM
Packaging PackQty
MRB22HO 22.0 110 260 450-600 Tube 1MRB24HO 24.0 110 260 350-500 Tube 1MRB25HO 25.0 110 260 350-500 Tube 1MRB26HO 26.0 110 260 350-500 Tube 1MRB30HO 30.0 110 260 350-500 Tube 1
TIMco Code
Drill 0 (mm)
Length (adaptor) (mm)
Working Length (inc. head)
Packaging PackQty
STDS212 - 220 260 Tube 1
1) When rebar is encountered during hammer drilling with a normal SDS plus bit, immediately stop the rotary hammer and remove the bit from the hole.
2) Mount a rotary rebar cutter in the SDS plus rotary hammer with the hammer action switched OFF. Insert the rebar cutter into the hole and start it rotating above the steel. Slowly lower on to the rebar, exerting steady pressure to make sure the cutter is actually cutting and not just spinning on the top of the metal, as this can cause hardening of the tool.
3) Cut through the bar and withdraw the tool and any cut steel. Remove from the machine and re-insert the SDS plus Bit. Switch the hammer action back on and carry on drilling in the hole to the required depth.
Note : Sizes 22-32mm diameter MUST be used in conjunction with the SDS Plus Drive Adaptor.
Key Features
Materials
Rebar
SDS Plus Drive Adaptor For Rebar Cutter Head
SDS Shank Rebar Cutters
Head only
Installation Guide
mm
Ceramic Tile Glass
TCT
Tile
& G
lass
BiT
7
Ceramic Tile Glass
Materials
*Products are not vented
80
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
SDS PLU
S SHA
NK
REBA
R CUTTERS
Tile GlassPorcelain Granite
Materials
TIMco Code
Description Drill (mm)
Working Length (mm)
Pack Qty
DD5 Wet Diamond drill 5 65 1DD6 Wet Diamond drill 6 65 1DD7 Wet Diamond drill 7 65 1DD8 Wet Diamond drill 8 65 1DD10 Wet Diamond drill 10 65 1DD12 Wet Diamond drill 12 65 1DD15 Wet Diamond drill 15 65 1DD20 Wet Diamond drill 20 65 1DD25 Wet Diamond drill 25 65 1DD115 Wet Diamond drill 115 65 1
DRY Diamond Tile Drill Bits
TIMco Code Description Drill (mm) Working Length (mm) Pack Qty
VBD5 Dry cutting diamond drill 5 65 1 VBD6 Dry cutting diamond drill 6 65 1 VBD7 Dry cutting diamond drill 7 80 1 VBD8 Dry cutting diamond drill 8 80 1 VBD10 Dry cutting diamond drill 10 80 1 VBD12 Dry cutting diamond drill 12 80 1 VBD15 Dry cutting diamond drill 15 80 1 VBD20 Dry cutting diamond drill 20 80 1 VBD25 Dry cutting diamond drill 25 80 1
Wet Diamond Drill BitsUse water to cool the cutting area in conjunction with the ADDAX accessories.
Materials: tile, porcelain, glass and granite.
* When compared with a standard wet diamond drill bit.
2 Use the groove...and slowly bring the drill up to 90º to create a ring.
3 Apply water... (For WET Drill only)Keep checking to make sure the hole does not run dry.
4 Eject the cut material “slug” and move on to the nexthole.
1 Create a groove...by working carefully at an angle of approx 30° to the material
Accessories
TIMco Code Description Qty
UGS Guide 5-12mm 1UGL Guide 15-115mm 1CS Water Pump 1
Easy to use
Vacuum brazed technology, allows the dry drill bit to be used at a
higher temperature to cut through hard porcelain tile, ceramics,
marble and slate with ease.
Integrated lubricant, aids cooling and prolongs life, which means
there is no requirement for additional lubricant.
Hexagonal shank, prevents slippage in the chuck.
Laser etched, diameter on body for ease of identification.
For drilling holes in many different materials, particularly
porcelain, ceramics, glass, slate and marble.
Dry Diamond Bits
for Tile & GlassUP TO 4x MORE HOLES
*
DRILLS
FBEQR150 EXTENSION ROD - 6.35 Q/R 150 1 10FBEQR300 EXTENSION ROD - 6.35 Q/R 300 1 10
Key Features
Key Features
Key Features
For use in hardwood, softwood and composite boards.
For drilling large diameter holes in medium and softwood, plywood and MDF.
High grade HSS steel for longer life
Three point design for faster, cleaner holes
Compound angle, ground recessed cutting edge for superior cutting performance
1/4” quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors
Fully ground
Up to 3x the heat resistance
of standard carbon steel
bits
Reduced shank on diameters
over 12mm, for use with
1/2" 3 jaw shank
Bright/black finish
Bright finish
HSS Brad Point Wood Bits
Hexagonal Shank Flat Wood Bits
Flat Bit Extension Rods
TIMco Code
Drill 0 (mm)
Working Length (mm)
Overall Length (mm)
Shank 0 (mm)
Wallet Qty
Wallets PerCarton
BP3 3.0 33 60 3 1 10BP4 4.0 43 75 4 1 10BP5 5.0 52 87 5 1 10BP6 6.0 57 92 6 1 10BP7 7.0 69 108 7 1 10BP8 8.0 75 118 8 1 10BP10 10.0 87 133 10 1 10BP11 11.0 89 142 11 1 10BP12 12.0 96 150 12 1 10BP14 14.0 100 160 12 1 10BP16 16.0 120 175 12 1 10BP20 20.0 140 200 12 1 10
TCT Hinge Cutter
TIMco Code
Drill 0 (mm)
Overall Length (mm)
Shank 0 (mm)
Tube Qty
Tubes PerCarton
35HC 35 60 12.7 1 10
TIMco Code
Drill 0 (mm)
Overall Length (mm)
Blister Pack Qty
Blisters Per Carton
FB6 6.0 152 1 10FB8 8.0 152 1 10FB10 10.0 152 1 10FB12 12.0 152 1 10FB13 13.0 152 1 10FB14 14.0 152 1 10FB16 16.0 152 1 10FB18 18.0 152 1 10FB19 19.0 152 1 10FB20 20.0 152 1 10FB22 22.0 152 1 10FB24 24.0 152 1 10FB25 25.0 152 1 10FB26 26.0 152 1 10FB28 28.0 152 1 10FB30 30.0 152 1 10FB32 32.0 152 1 10FB35 35.0 152 1 10FB38 38.0 152 1 10
Extension rod for use in conjunction with either 6mm hexagonal shank or 1/4” quick release shank flat wood bits.
For cutting blind holes into MDF and chipboard to accept cantilever door hinges.
• Tungsten Carbide cutting edges for long life
• 12.7mm shank compatible with both pillar drills (13mm capacity) and 1∕2” industrial routers (max. 1,000 rpm)
• Bright/black finish
82
Materials
Hardwood Softwood Plywood Chipboard MDF
Materials
Softwood Plywood Chipboard MDF
Materials
Hardwood Softwood Plywood Chipboard MDF
mm
Wood
Br
ad
Po
int
wo
od
Bit
6
HSS BRA
D PO
INT W
OO
D BITS
FLAT WO
OD
BITS & TCT H
ING
E CUTTER
Key Features
Screw pointFor drilling
large diameter holes into thick, hardwood and softwood.
6mm-19mm Ø - 9mm hex shank
20mm-32mm Ø - 11mm hex shank
High grade carbon steel
Bright/black finish
Hexagonal Shank Wood Auger Bits
SDS plus Wood Auger Bits
TIMco Code
Drill 0 (mm)
Working Length (mm)
Total Length (mm)
Tube Qty
Tubes PerCarton
HA10100 10.0 55 100 1 10HA12100 12.0 55 100 1 10HA14100 14.0 55 100 1 10HA16100 16.0 55 100 1 10HA20100 20.0 55 100 1 10HA22100 22.0 55 100 1 10HA25100 25.0 55 100 1 10HA32100 32.0 55 100 1 10HA8155 8.0 90 155 1 10HA14155 14.0 90 155 1 10HA16155 16.0 90 155 1 10HA19155 19.0 90 155 1 10HA20155 20.0 90 155 1 10HA22155 22.0 90 155 1 10HA25155 25.0 90 155 1 10HA28155 28.0 90 155 1 10HA30155 30.0 90 155 1 10HA32155 32.0 90 155 1 10HA6235 6.0 165 235 1 10HA8235 8.0 165 235 1 10HA10235 10.0 165 235 1 10HA12235 12.0 165 235 1 10HA13235 13.0 165 235 1 10HA14235 14.0 165 235 1 10HA16235 16.0 165 235 1 10HA18235 18.0 165 235 1 10HA19235 19.0 165 235 1 10HA20235 20.0 165 235 1 10HA22235 22.0 165 235 1 10HA24235 24.0 165 235 1 10HA25235 25.0 165 235 1 10HA26235 26.0 165 235 1 10HA28235 28.0 165 235 1 10HA30235 30.0 165 235 1 10HA32235 32.0 165 235 1 10HA8460 8.0 385 460 1 10HA10460 10.0 385 460 1 10HA12460 12.0 385 460 1 10HA14460 14.0 385 460 1 10HA16460 16.0 385 460 1 10HA18460 18.0 385 460 1 10HA20460 20.0 385 460 1 10HA22460 22.0 385 460 1 10HA26460 26.0 385 460 1 10
TIMco Code
Drill 0 (mm)
Working Length (mm)
Total Length (mm)
Tube Qty
Tubes PerCarton
SA6200 6.0 100 200 1 10SA8200 8.0 100 200 1 10SA10235 10.0 160 235 1 10SA12235 12.0 160 235 1 10SA16235 16.0 160 235 1 10SA20235 20.0 160 235 1 10SA22235 22.0 160 235 1 10SA25235 25.0 160 235 1 10
SDS plus shank for use in rotary hammers with the SDS plus tool holder system switched to ROTARY MODE ONLY.
SoftwoodMost Hardwoods Plywood Chipboard MDF
Materials
Key Features
83
HEXA
GO
NA
L & SD
S SHA
NK W
OO
D A
UG
ER BITSw
ww
.TIMco.co.uk • w
ww
.TIMco.ie
Key Features
For particularly tough or hard metal drilling applications, such as stainless steel, Cr-Ni and special acid resistant steels.
Dimensionally precise
Manufactured to DIN338
High heat resistance for
particularly tough metal
drilling
M35 alloyed HSS steel
with 5% Cobalt
content
Fully ground from solid
material
HSS Cobalt Jobber Drills - Industrial Pack
HSS Cobalt Jobber Drills - Retail Wallet
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSCO1 1.0 - 12 34 10 10HSSCO15 1.5 - 18 40 10 10HSSCO2 2.0 - 24 49 10 10HSSCO25 2.5 M3 30 57 10 10HSSCO3 3.0 - 33 61 10 10HSSCO32 3.2 - 36 65 10 10HSSCO33 3.3 M4 36 65 10 10HSSCO35 3.5 - 39 70 10 10HSSCO4 4.0 - 43 75 10 10HSSCO42 4.2 M5 43 75 10 10HSSCO45 4.5 - 47 80 10 10HSSCO48 4.8 - 52 86 10 10HSSCO5 5.0 M6 52 86 10 10HSSCO55 5.5 - 57 93 10 10HSSCO6 6.0 M7 57 93 10 10HSSCO65 6.5 - 63 101 10 10HSSCO68 6.8 M8 69 109 10 10HSSCO7 7.0 - 69 109 10 10HSSCO75 7.5 - 69 109 5 10HSSCO8 8.0 - 75 117 5 10HSSCO85 8.5 M10 75 117 5 10HSSCO9 9.0 - 81 125 5 10HSSCO95 9.5 M11 81 125 5 10HSSCO10 10.0 - 87 133 5 10HSSCO102 10.2 M12 87 133 5 10HSSCO105 10.5 - 87 133 5 10HSSCO110 11.0 - 94 142 5 10HSSCO115 11.5 - 94 142 5 10HSSCO120 12.0 M14 101 151 5 10HSSCO125 12.5 - 101 151 5 10HSSCO130 13.0 - 101 151 5 10
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSCOR1 1.0 - 12 34 1 10HSSCOR1.5 1.5 - 18 40 1 10HSSCOR2 2.0 - 24 49 1 10HSSCOR25 2.5 M3 30 57 1 10HSSCOR3 3.0 - 33 61 1 10HSSCOR32 3.2 - 36 65 1 10HSSCOR33 3.3 M4 36 65 1 10HSSCOR35 3.5 - 39 70 1 10HSSCOR4 4.0 - 43 75 1 10HSSCOR42 4.2 M5 43 75 1 10HSSCOR45 4.5 - 47 80 1 10HSSCOR48 4.8 - 52 86 1 10HSSCOR5 5.0 M6 52 86 1 10HSSCOR55 5.5 - 57 93 1 10HSSCOR6 6.0 M7 57 93 1 10HSSCOR65 6.5 - 63 101 1 10HSSCOR7 7.0 - 69 109 1 10HSSCOR75 7.5 - 69 109 1 10HSSCOR8 8.0 - 75 117 1 10HSSCOR85 8.5 M10 75 117 1 10HSSCOR9 9.0 - 81 125 1 10HSSCOR95 9.5 M11 81 125 1 10HSSCOR100 10.0 - 87 133 1 10HSSCOR105 10.5 - 87 133 1 10HSSCOR110 11.0 - 94 142 1 10HSSCOR115 11.5 - 94 142 1 10HSSCOR120 12.0 M14 101 151 1 10HSSCOR125 12.5 - 101 151 1 10HSSCOR130 13.0 - 101 151 1 10
Stainless Steel Aluminium Non Ferrous
MetalSteel Plastic
Materials
Retail WalletIndustry Pack
mm
Stainless Steel
Steel
Aluminium
Non Ferrous Metal
Plastic
Metal & Plastic
HSS
Co
ba
lt J
ob
ber
Dr
ill
DiN
338
9
Note : Split point from 3mm and above
HSS Cobalt Jobber Drill Set TIMco Code Drill (mm) Carton Qty
HSSCO19DS 19pc. HSS split point fully ground cobalt HSS Jobber drill set 1-10mm x 0.5mm
20
HSSCO25DS 25pc. HSS split point fully ground cobalt HSS Jobber drill set 1-13mm x 0.5mm
10
Durable metal
storage case.
HIGH PERFORMANCE
135° split point tip from 3mm
and above eradicates the
need to pre-drill/centre punch. Prevents
‘walking’ and enables faster penetration.
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
84
HSS - CO
BALT JO
BBER DRILLS - D
IN338
Key Features
A premium quality drill for use with alloy steel, cast iron, non-ferrous metals and plastics.
Fully ground from solid
material
High grade M2 alloyed
HSS steel
Manufactured to DIN338
Dimensionally precise
Retail WalletIndustry Pack
Materials
HSS M2 Jobber Drills - Industrial Pack
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSG1 1.0 - 12 34 10 10HSSG15 1.5 - 18 40 10 10HSSG2 2.0 - 24 49 10 10HSSG24 2.4 - 30 57 10 10HSSG25 2.5 M3 30 57 10 10HSSG3 3.0 - 33 61 10 10HSSG31 3.1 - 36 65 10 10HSSG32 3.2 - 36 65 10 10HSSG33 3.3 M4 36 65 10 10HSSG35 3.5 - 39 70 10 10HSSG36 3.6 - 39 70 10 10HSSG38 3.8 - 43 75 10 10HSSG4 4.0 - 43 75 10 10HSSG41 4.1 - 43 75 10 10HSSG42 4.2 M5 43 75 10 10HSSG45 4.5 - 47 80 10 10HSSG48 4.8 - 52 86 10 10HSSG49 4.9 - 52 86 10 10HSSG5 5.0 M6 52 86 10 10HSSG51 5.1 - 52 86 10 10HSSG53 5.3 - 52 86 10 10HSSG55 5.5 - 57 93 10 10HSSG6 6.0 M7 57 93 10 10HSSG64 6.4 - 63 101 10 10HSSG65 6.5 - 63 101 10 10HSSG68 6.8 M8 69 109 10 10HSSG7 7.0 - 69 109 10 10HSSG75 7.5 - 69 109 5 10HSSG8 8.0 - 75 117 5 10HSSG85 8.5 M10 75 117 5 10HSSG9 9.0 - 81 125 5 10HSSG95 9.5 M11 81 125 5 10HSSG100 10.0 - 87 133 5 10HSSG102 10.2 M12 87 133 5 10HSSG105 10.5 - 87 133 5 10HSSG110 11.0 - 94 142 5 10HSSG115 11.5 - 94 142 5 10HSSG120 12.0 M14 101 151 5 10HSSG125 12.5 - 101 151 5 10HSSG130 13.0 - 101 151 5 10
HSS M2 Jobber Drills - Retail Wallet
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSGR2 2.0 - 24 49 1 10HSSGR25 2.5 M3 30 57 1 10HSSGR3 3.0 - 33 61 1 10HSSGR35 3.5 - 39 70 1 10HSSGR4 4.0 - 43 75 1 10HSSGR45 4.5 - 47 80 1 10HSSGR5 5.0 M6 52 86 1 10HSSGR55 5.5 - 57 93 1 10HSSGR6 6.0 M7 57 93 1 10HSSGR65 6.5 - 63 101 1 10HSSGR7 7.0 - 69 109 1 10HSSGR8 8.0 - 75 117 1 10HSSGR85 8.5 M10 75 117 1 10HSSGR9 9.0 - 81 125 1 10HSSGR100 10.0 - 87 133 1 10HSSGR110 11.0 - 94 142 1 10HSSGR120 12.0 M14 101 151 1 10HSSGR130 13.0 - 101 151 1 10
HSS M2 Jobber Drills - Industrial PackTIMco Code
Drill (inch)
Flute Length (inch)
Overall Length (inch)
Pack Qty
Packs PerCarton
HSIG116 1/16 7/8 1.7/8 10 10HSIG564 5/64 1 2 10 10HSIG332 3/32 1.1/4 2.1/4 10 10HSIG764 7/64 1.1/2 2.5/8 10 10HSIG18 1/8 1.5/8 2.3/4 10 10HSIG964 9/64 1.3/4 2.7/8 10 10HSIG532 5/32 2 3.1/8 10 10HSIG316 3/16 2.5/16 3.1/2 10 10HSIG1364 13/64 2.7/16 3.5/8 10 10HSIG732 7/32 2.1/2 3.3/4 10 10HSIG14 1/4 2.3/4 4 10 10HSIG516 5/16 3.3/16 4.1/2 5 10HSIG2164 21/64 3.5/16 4.5/8 5 10HSIG38 3/8 3.5/8 5 5 10HSIG12 1/2 4.1/2 6 5 10
Steel Cast Iron Non Ferrous MetalAluminium Plastic
mm
Steel
Aluminium
Cast Iron
Non Ferrous Metal
Plastic
Metal & Plastic
HSS
Gr
ou
nd
Jo
bb
er d
ril
l d
in33
8
6
TIMco Code
Drill (mm)
Carton Qty
HSSG19DS 19pc. HSS split point fully ground HSS Jobber drill set 1-10mm x 0.5mm
20
HSSG25DS 25pc. HSS split point fully ground HSS Jobber drill set 1-13mm x 0.5mm
10
HSS Ground Jobber Drill Set
Note : Split point from 3mm and above
Durable metal
storage case.
HIGH PERFORMANCE
135° split point tip from 3mm or 1/8” and above
eradicates the need to
pre-drill/centre punch. Prevents
‘walking’ and enables faster penetration
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
85
HSS - M
2 FULLY G
ROU
ND
JOB
BER D
RILLS - DIN
338
Key Features
For drilling carbon and alloy steel, non-ferrous metal and plastics
Manufactured to DIN338
Black oxide finish
Roll forged
HSS steel
HSS Roll Forged Jobber Drills - Industrial Pack
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSR1 1.0 - 12 34 10 10HSSR15 1.5 - 18 40 10 10HSSR2 2.0 - 24 49 10 10HSSR25 2.5 M3 30 57 10 10HSSR3 3.0 - 33 61 10 10HSSR32 3.2 - 36 65 10 10HSSR33 3.3 M4 36 65 10 10HSSR35 3.5 - 39 70 10 10HSSR36 3.6 - 39 70 10 10HSSR4 4.0 - 43 75 10 10HSSR42 4.2 M5 43 75 10 10HSSR45 4.5 - 47 80 10 10HSSR48 4.8 - 52 86 10 10HSSR49 4.9 - 52 86 10 10HSSR5 5.0 M6 52 86 10 10HSSR52 5.2 - 52 86 10 10HSSR55 5.5 - 57 93 10 10HSSR6 6.0 M7 57 93 10 10HSSR65 6.5 - 63 101 10 10HSSR68 6.8 M8 69 109 10 10HSSR7 7.0 - 69 109 10 10HSSR72 7.2 - 69 109 5 10HSSR75 7.5 - 69 109 5 10HSSR8 8.0 - 75 109 5 10HSSR85 8.5 M10 75 109 5 10HSSR9 9.0 - 81 125 5 10HSSR95 9.5 M11 81 125 5 10HSSR96 9.6 - 87 133 5 10HSSR100 10.0 - 87 133 5 10HSSR102 10.2 M12 87 133 5 10HSSR105 10.5 - 87 133 5 10HSSR110 11.0 - 94 142 5 10HSSR115 11.5 - 94 142 5 10HSSR120 12.0 M14 101 151 5 10HSSR125 12.5 - 101 151 5 10HSSR130 13.0 - 101 151 5 10
HSS Roll Forged Jobber Drills - Retail Pack
HSS Roll Forged Jobber Drills - Industrial Pack
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Wallet Qty
Wallets PerCarton
HSSRR1 1.0 - 12 34 2 10HSSRR15 1.5 - 18 40 2 10HSSRR2 2.0 - 24 49 2 10HSSRR25 2.5 M3 30 57 2 10HSSRR3 3.0 - 33 61 2 10HSSRR33 3.3 M4 36 65 2 10HSSRR35 3.5 - 39 70 2 10HSSRR4 4.0 - 43 75 2 10HSSRR45 4.5 - 47 80 2 10HSSRR5 5.0 M6 52 86 2 10HSSRR55 5.5 - 57 93 2 10HSSRR6 6.0 M7 57 93 2 10HSSRR65 6.5 - 63 101 1 10HSSRR7 7.0 - 69 109 1 10HSSRR8 8.0 - 75 109 1 10HSSRR85 8.5 M10 75 117 1 10HSSRR9 9.0 - 81 125 1 10HSSRR100 10.0 - 87 133 1 10HSSRR110 11.0 - 94 142 1 10HSSRR120 12.0 M14 101 151 1 10HSSRR130 13.0 - 101 151 1 10
TIMco Code
Drill (inch)
Tap Sizes
Flute Length (inch)
Overall Length (inch)
Wallet Qty
Wallets PerCarton
HSIR116 1/16 - 7/8 1.7/8 10 10HSIR564 5/64 - 1 2 10 10HSIR332 3/32 - 1.1/4 2.1/4 10 10HSIR764 7/64 - 1.1/2 2.5/8 10 10HSIR18 1/8 - 1.5/8 2.3/4 10 10HSIR964 9/64 - 1.3/4 2.7/8 10 10HSIR532 5/32 - 2 3.1/8 10 10HSIR1164 11/64 - 2.1/8 3.1/4 10 10HSIR316 3/16 - 2.5/16 3.1/2 10 10HSIR732 7/32 - 2.1/2 3.3/4 10 10HSIR14 1/4 - 2.3/4 4 10 10HSIR1764 17/64 - 2.7/8 4.1/8 10 10HSIR516 5/16 - 3.3/16 4.1/2 5 10HSIR38 3/8 - 3.5/8 5 5 10HSIR2964 29/64 - 4.3/16 5.5/8 5 10HSIR12 1/2 - 4.1/2 6 5 10
Industry Pack Retail Wallet
Materials
Aluminium Non Ferrous MetalSteel Plastic
mm
Steel
Aluminium
Non Ferrous Metal
Plastic
Metal & Plastic
HSS
Ro
lled
Jo
bb
eR d
Ril
l d
iN33
8
8
TIMco Code
Drill (mm)
Carton Qty
HSSR19DS 19pc. HSS split point roll forged HSS Jobber drill set 1 - 10mm x 0.5mm
20
HSSR25DS 25pc. HSS split point roll forged HSS Jobber drill set 1 - 13mm x 0.5mm
10
HSSR170DS 170pc. HSS split point roll forged workshop drill set 1 - 8mm x 10pc, 8.5-10mm x 5pc
1
HSS Roll Forged Jobber Drill Set
Note : Split point from 3mm and above
Durable metal
storage case.
HIGH PERFORMANCE
135° split point tip from 3mm or 1/8” and above eradicates the
need to pre-drill/centre punch.
Prevents ‘walking’ and enables faster
penetration
86
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
HSS - RO
LL FORG
ED JO
BBER DRILLS - D
IN338
Key Features
For drilling carbon and alloy steel, cast iron, non-ferrousmetal and plastics.
Fully ground from solid material
High quality M2 grade HSS steel
Dimensionally precise
Manufactured to DIN340
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSGL2 2.0 - 56 85 10 10HSSGL25 2.5 M3 62 95 10 10HSSGL3 3.0 - 66 100 10 10HSSGL32 3.2 - 69 106 10 10HSSGL35 3.5 - 73 112 10 10HSSGL4 4.0 - 78 119 10 10HSSGL42 4.2 M5 78 119 10 10HSSGL45 4.5 - 82 126 10 10HSSGL48 4.8 - 87 132 10 10HSSGL5 5.0 M6 87 132 10 10HSSGL55 5.5 - 91 139 10 10HSSGL6 6.0 M7 91 139 10 10HSSGL65 6.5 - 97 148 5 10HSSGL7 7.0 - 102 156 5 10HSSGL8 8.0 - 109 165 5 10HSSGL85 8.5 M10 109 165 5 10HSSGL9 9.0 - 115 175 5 10HSSGL100 10.0 - 121 184 5 10
Key Features
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics.
Dimensionally precise
12.5mm diameter shank with three flats
to prevent bit slipping in chuck
Milled flute
M2 Grade HSS Titanium
nitride coating to reduce friction
and improve performance
Flute Length M2 Grade HSS
HSS Blacksmiths Drills - Retail Tube
TIMco Code
Drill (mm)
Flute Length (mm)
Overall Length (mm)
Tube Qty
Tubes PerCarton
BS135 13.5 75 160 1 10BS14 14.0 75 160 1 10BS145 14.5 75 160 1 10BS15 15.0 75 160 1 10BS155 15.5 75 160 1 10BS16 16.0 75 160 1 10BS165 16.5 75 160 1 10BS17 17.0 75 160 1 10BS175 17.5 75 160 1 10BS18 18.0 75 160 1 10BS185 18.5 75 160 1 10BS19 19.0 75 160 1 10BS195 19.5 75 160 1 10BS20 20.0 75 160 1 10BS22 22.0 75 160 1 10BS24 24.0 75 160 1 10BS25 25.0 75 160 1 10
Materials
Steel Cast IronAluminium Non Ferrous Metal Plastic
Retail Wallet
mm
Steel
Aluminium
Non Ferrous Metal
Plastic
Metal & Plastic
HSS
Gr
ou
nd
Lo
nG
Ser
ieS
dr
iLL
din
340
8
HSS M2 Fully Ground Long Series Drills - Retail Pack
HSS M2 Fully Ground Long Series Drills - Industrial Pack
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSGLR3 3.0 - 66 100 1 10HSSGLR35 3.5 - 73 112 1 10HSSGLR4 4.0 - 78 119 1 10HSSGLR45 4.5 - 82 126 1 10HSSGLR5 5.0 M6 87 132 1 10HSSGLR55 5.5 - 91 139 1 10HSSGLR6 6.0 M7 91 139 1 10HSSGLR65 6.5 - 97 148 1 10HSSGLR7 7.0 - 102 156 1 10HSSGLR8 8.0 - 109 165 1 10
Industry Pack
Materials
Steel Cast Iron Non Ferrous MetalAluminium Plastic
HIGH PERFORMANCE
135° split point tip from 3mm and above eradicates the need to pre-
drill/centre punch. Prevents ‘walking’ and enables faster
penetration
HIGH PERFORMANCE
118° split point tip eradicates the need to pre-drill/
centre punch in thin material.
Prevents ‘walking’
and enables faster penetration
87
HSS - M
2 GRO
UN
D BLA
CKSMITH
S DRILLS
HSS - M
2 FULLY G
ROU
ND
LON
G SERIES D
RILLS - DIN
340
HSS M2 Broaching Cutters - Industrial Pack
30mm - Industrial Packs 50mm - Industrial Packs
Replacement Pilot Pins
TIMco Code
Cutter 0 (mm)
Cutter Depth (mm)
Pack Qty
BCS12 12 30 1BCS13 13 30 1BCS14 14 30 1BCS15 15 30 1BCS16 16 30 1BCS17 17 30 1BCS18 18 30 1BCS19 19 30 1BCS20 20 30 1BCS21 21 30 1BCS22 22 30 1BCS23 23 30 1BCS24 24 30 1BCS25 25 30 1BCS26 26 30 1BCS27 27 30 1BCS28 28 30 1BCS29 29 30 1BCS30 30 30 1BCS31 31 30 1BCS32 32 30 1BCS33 33 30 1BCS35 35 30 1BCS36 36 30 1BCS37 37 30 1BCS38 38 30 1BCS39 39 30 1BCS40 40 30 1BCS41 41 30 1BCS43 43 30 1BCS44 44 30 1BCS45 45 30 1BCS46 46 30 1BCS47 47 30 1BCS48 48 30 1BCS49 49 30 1BCS50 50 30 1
Article Number Cutter Diameter (mm) Cutter Depth (mm)
BCP301250 12-50 30BCP501250 12-50 50
TIMco Code
Cutter 0 (mm)
Cutter Depth (mm)
Pack Qty
BCL12 12 50 1BCL13 13 50 1BCL14 14 50 1BCL15 15 50 1BCL16 16 50 1BCL17 17 50 1BCL18 18 50 1BCL20 20 50 1BCL21 21 50 1BCL22 22 50 1BCL23 23 50 1BCL24 24 50 1BCL25 25 50 1BCL26 26 50 1BCL27 27 50 1BCL28 28 50 1BCL29 29 50 1BCL30 30 50 1BCL31 31 50 1BCL32 32 50 1BCL33 33 50 1BCL35 35 50 1BCL36 36 50 1BCL38 38 50 1BCL39 39 50 1BCL41 41 50 1BCL42 42 50 1BCL43 43 50 1BCL44 44 50 1BCL45 45 50 1BCL46 46 50 1BCL47 47 50 1BCL48 48 50 1BCL49 49 50 1BCL50 50 50 1
Key Features
For drilling large diameter holes in steel using electro-magnetic drilling machines. Weldon shank.
Titanium-Aluminium-Nitride (TiAIN) coating ensures long service life due to 20% less friction and 20% greater hardness than even Titanium Nitride (TiN) coating
High grade M2 HSS steel body
Available in both standard (30mm cutting depth) and long (50mm cutting depth) lengths.
Broaching cutter supplied complete with pilot pin.
Key Features
HIGH PERFORMANCE
135° split point tip
eradicates the need to
pre-drill/centre punch. Prevents
‘walking’ and enables faster penetration
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics.
Fully ground from solid
material
Manufactured to DIN1897
Dimensionally precise
HSS M2 Stub Drills - Industrial Pack
TIMco Code
Drill (mm)
Tap Sizes
Flute Length (mm)
Overall Length (mm)
Pack Qty
Packs PerCarton
HSSGS32 3.2 - 18 49 10 10HSSGS33 3.3 M4 18 49 10 10HSSGS4 4.0 - 22 55 10 10HSSGS41 4.1 - 22 55 10 10HSSGS42 4.2 M5 22 55 10 10HSSGS49 4.9 - 26 62 10 10HSSGS5 5.0 M6 26 62 10 10HSSGS51 5.1 - 26 62 10 10
Steel Cast Iron Non Ferrous MetalAluminium Plastic
Materials
Steel
Materials
88
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
HSS M
2 STUB D
RILLS & M
2 HSS BRO
ACH
ING
CUTTERS
Key Features
Key Features
Key Features
Materials
Materials
Materials
Materials
Cone Cutters
Step Drills
De-Burring Countersinks
3 Flute Countersink
TIMco Code 0 (mm) Description Tube Qty
CC314 3 to 14 HSS cone cutter 1CC520 5 to 20 HSS cone cutter 1CC531 5 to 31 HSS cone cutter 1CC1631 16 to 31 HSS cone cutter 1
TIMco Code 0 (mm) Description Tube Qty
SD412 4,5,6,7,8,9,10,11,12 HSS step drill 1SD420 4,6,8,10,12,14,16,18,20 HSS step drill 1SD430 4,6,8,10,12,15,18,20,22,24,26,28,30 HSS step drill 1SD439 4,6,8,10,12,21,25,27,30,33,36,39 HSS step drill 1
TIMco Code 0 (mm) Description Tube Qty
CS25 2 to 5 HSS de-burring countersink 1CS510 5 to 10 HSS de-burring countersink 1CS1015 10 to 15 HSS de-burring countersink 1CS1520 15 to 20 HSS de-burring countersink 1
TIMco Code
0 (mm)
Screw 0 Description Tube Qty(Metric) (Imp)
CS63 6.3 3.0 4-5 HSS 3 flute countersink 1CS83 8.3 3.5-4.0 6-8 HSS 3 flute countersink 1CS104 10.4 4.5-5.0 10 HSS 3 flute countersink 1CS124 12.4 6.0 12 HSS 3 flute countersink 1CS165 16.5 8.0 16 HSS 3 flute countersink 1CS205 20.5 - - HSS 3 flute countersink 1CS250 25.0 - - HSS 3 flute countersink 1
High quality M2 grade HSS steel
High quality M2 grade HSS steel
High quality M2 grade HSS steel
High quality M2 grade HSS steel
For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm. Using a suitable lubricant is recommended.
For drilling, enlarging and de-burring holes in metal up to a thickness of 4mm. Using a suitable lubricant is recommended.
For countersinking and de-burring existing holes in metal and plastic.
For countersinking existing holes in metal, plastic and wood.
3 flat shank to prevent slipping in the chuck
3 flat shank to prevent slipping
in the chuck
3 flat shank to prevent slipping
in the chuck
3 flat shank to prevent slipping in the chuck
Titanium Nitride Coating to reduce friction and prolong life
Transverse hole for burr extraction
90° head angle
Thin Sheet Metal
Thin Sheet Metal
Thin Sheet Metal
Thin Sheet Metal
Plastic
Plastic
Aluminium
Aluminium
Aluminium
Aluminium
Hardwood Softwood
Key Features
89
HSS CO
NE CU
TTERS - STEP DRILLS - D
E-BURIN
G &
3 FLUTE CO
UN
TERSINKS
For drilling large diameter holes in wood, plastic, MDF, plywood, plasterboard, sheet metal, stainless steel and non-ferrous metal.
Hole Saws
Sheet Metal
Non Ferrous Metal Plastic Wood MDF Plywood Plasterboard
Materials
HSS M3 Bi-Metal Holesaws - Variable Pitch
TIMco Code
Saw (mm)
Saw Depth (mm)
Threaded Mount (inch)
Arbor to Suit
Pack Qty
Packs per Carton
HS14 14.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS16 16.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS17 17.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS19 19.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS20 20.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS21 21.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS22 22.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS24 24.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS25 25.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS27 27.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS29 29.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS30 30.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HS32 32.0 32 1/2 - 18 AA2, SDSA2 1 10HS35 35.0 32 1/2 - 18 AA2, SDSA2 1 10HS37 37.0 32 1/2 - 18 AA2, SDSA2 1 10HS38 38.0 32 1/2 - 18 AA2, SDSA2 1 10HS40 40.0 32 1/2 - 18 AA2, SDSA2 1 10HS41 41.0 32 1/2 - 18 AA2, SDSA2 1 10HS43 43.0 32 1/2 - 18 AA2, SDSA2 1 10HS44 44.0 32 1/2 - 18 AA2, SDSA2 1 10HS46 46.0 32 1/2 - 18 AA2, SDSA2 1 10HS48 48.0 32 1/2 - 18 AA2, SDSA2 1 10HS51 51.0 32 1/2 - 18 AA2, SDSA2 1 10HS52 52.0 32 1/2 - 18 AA2, SDSA2 1 10HS54 54.0 32 1/2 - 18 AA2, SDSA2 1 10
TIMco Code
Saw (mm)
Saw Depth (mm)
Threaded Mount (inch)
Arbor to Suit
Pack Qty
Packs per Carton
HS57 57.0 32 1/2 - 18 AA2, SDSA2 1 10HS60 60.0 32 1/2 - 18 AA2, SDSA2 1 10HS64 64.0 32 1/2 - 18 AA2, SDSA2 1 10HS65 65.0 32 1/2 - 18 AA2, SDSA2 1 10HS67 67.0 32 1/2 - 18 AA2, SDSA2 1 10HS68 68.0 32 1/2 - 18 AA2, SDSA2 1 10HS70 70.0 32 1/2 - 18 AA2, SDSA2 1 10HS73 73.0 32 1/2 - 18 AA2, SDSA2 1 10HS76 76.0 32 1/2 - 18 AA2, SDSA2 1 10HS79 79.0 32 1/2 - 18 AA2, SDSA2 1 10HS83 83.0 32 1/2 - 18 AA2, SDSA2 1 10HS86 86.0 32 1/2 - 18 AA2, SDSA2 1 10HS89 89.0 32 1/2 - 18 AA2, SDSA2 1 10HS92 92.0 32 1/2 - 18 AA2, SDSA2 1 10HS95 95.0 32 1/2 - 18 AA2, SDSA2 1 10HS98 98.0 32 1/2 - 18 AA2, SDSA2 1 10HS102 102.0 32 1/2 - 18 AA2, SDSA2 1 10HS105 105.0 32 1/2 - 18 AA2, SDSA2 1 10HS108 108.0 32 1/2 - 18 AA2, SDSA2 1 10HS111 111.0 32 1/2 - 18 AA2, SDSA2 1 10HS114 114.0 32 1/2 - 18 AA2, SDSA2 1 10HS121 121.0 32 1/2 - 18 AA2, SDSA2 1 10HS127 127.0 32 1/2 - 18 AA2, SDSA2 1 10HS140 140.0 32 1/2 - 18 AA2, SDSA2 1 10HS152 152.0 32 1/2 - 18 AA2, SDSA2 1 10
Constant Pitch
Variable pitch tooth pattern clears dust more efficiently and gives superior cutting performance in wood, plastic, non-ferrous metals and man-made boards.• High quality M3 grade HSS steel cutting edge and compatible with most makes of arbor
Variable Pitch
90
Holesaw Arbors including Pilot Drill
TIMco Code
For Holesaw Diameter (mm)
Shank (mm)
Thread Shank (mm)
Tube Qty
AA4 14-30 Hex 9.5 1/2” x 20 1AA1 14-30 Hex 11 1/2” x 20 1AA2 32-210 Hex 11 5/8” - 18 1SDSA1 14-30 SDS Plus 1/2” x 20 1SDSA2 32-210 SDS Plus 5/8” - 18 1
Holesaw Accessories
TIMco Code
Description Tube Qty
HPD Pilot drill for holesaws - 75mm Long 1HPDL Long Pilot drill for holesaws 107 mm Long 1HPDC Cobalt drill for holesaws - 75mm Long 1HSE 300mm holesaw extension rod for AA2 1
Plastic WoodStainless Steel Steel Sheet
MetalNon Ferrous
Metal Plywood PlasterboardMDF
Materials
HSS M42 Cobalt Bi-Metal Holesaws - Constant Pitch
TIMco Code
Saw (mm)
Saw Depth (mm)
Threaded Mount (inch)
Arbor to Suit
Pack Qty
Packs per Carton
HSC14 14.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC16 16.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC17 17.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC19 19.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC20 20.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC21 21.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC22 22.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC24 24.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC25 25.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC27 27.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC29 29.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC30 30.0 32 1/2 - 20 AA4, AA1, SDSA1 1 10HSC32 32.0 32 5/8 - 18 AA2, SDSA2 1 10HSC35 35.0 32 5/8 - 18 AA2, SDSA2 1 10HSC37 37.0 32 5/8 - 18 AA2, SDSA2 1 10HSC38 38.0 32 5/8 - 18 AA2, SDSA2 1 10HSC40 40.0 32 5/8 - 18 AA2, SDSA2 1 10HSC41 41.0 32 5/8 - 18 AA2, SDSA2 1 10HSC43 43.0 32 5/8 - 18 AA2, SDSA2 1 10HSC44 44.0 32 5/8 - 18 AA2, SDSA2 1 10HSC46 46.0 32 5/8 - 18 AA2, SDSA2 1 10HSC48 48.0 32 5/8 - 18 AA2, SDSA2 1 10HSC51 51.0 32 5/8 - 18 AA2, SDSA2 1 10HSC52 52.0 32 5/8 - 18 AA2, SDSA2 1 10HSC54 54.0 32 5/8 - 18 AA2, SDSA2 1 10HSC57 57.0 32 5/8 - 18 AA2, SDSA2 1 10HSC60 60.0 32 5/8 - 18 AA2, SDSA2 1 10HSC64 64.0 32 5/8 - 18 AA2, SDSA2 1 10
TIMco Code
Saw (mm)
Saw Depth (mm)
Threaded Mount (inch)
Arbor to Suit
Pack Qty
Packs per Carton
HSC65 65.0 32 5/8 - 18 AA2, SDSA2 1 10HSC67 67.0 32 5/8 - 18 AA2, SDSA2 1 10HSC68 68.0 32 5/8 - 18 AA2, SDSA2 1 10HSC70 70.0 32 5/8 - 18 AA2, SDSA2 1 10HSC73 73.0 32 5/8 - 18 AA2, SDSA2 1 10HSC76 76.0 32 5/8 - 18 AA2, SDSA2 1 10HSC79 79.0 32 5/8 - 18 AA2, SDSA2 1 10HSC83 83.0 32 5/8 - 18 AA2, SDSA2 1 10HSC86 86.0 32 5/8 - 18 AA2, SDSA2 1 10HSC89 89.0 32 5/8 - 18 AA2, SDSA2 1 10HSC92 92.0 32 5/8 - 18 AA2, SDSA2 1 10HSC95 95.0 32 5/8 - 18 AA2, SDSA2 1 10HSC98 98.0 32 5/8 - 18 AA2, SDSA2 1 10HSC102 102.0 32 5/8 - 18 AA2, SDSA2 1 10HSC105 105.0 32 5/8 - 18 AA2, SDSA2 1 10HSC108 108.0 32 5/8 - 18 AA2, SDSA2 1 10HSC111 111.0 32 5/8 - 18 AA2, SDSA2 1 10HSC114 114.0 32 5/8 - 18 AA2, SDSA2 1 10HSC121 121.0 32 5/8 - 18 AA2, SDSA2 1 10HSC127 127.0 32 5/8 - 18 AA2, SDSA2 1 10HSC140 140.0 32 5/8 - 18 AA2, SDSA2 1 10HSC152 152.0 32 5/8 - 18 AA2, SDSA2 1 10HSC160 160.0 32 5/8 - 18 AA2, SDSA2 1 10HSC165 165.0 32 5/8 - 18 AA2, SDSA2 1 10HSC168 168.0 32 5/8 - 18 AA2, SDSA2 1 10HSC177 177.0 32 5/8 - 18 AA2, SDSA2 1 10HSC200 200.0 32 5/8 - 18 AA2, SDSA2 1 10HSC210 210.0 32 5/8 - 18 AA2, SDSA2 1 10
Constant Pitch
Constant pitch tooth pattern ensures smooth cutting and less “chatter” when drilling metal, particularly thin sheet. • High quality M42 grade 5% Cobalt HSS steel cutting edge and compatible with most makes of arbor
91
Key Features
For drilling clean holes in general building materials, such as brick, block and medium density concrete. FOR ROTARY USE ONLY.
Dry Diamond Core Bits
TIMco Code
Description Drill
(mm)
Length (mm)
Segment Height
(mm)
GPCP22300 General Purpose Premium Diamond Cores 22 300 10GPCP28300 General Purpose Premium Diamond Cores 28 300 10GPCP32150 General Purpose Premium Diamond Cores 32 150 10GPCP38150 General Purpose Premium Diamond Cores 38 150 10GPCP48150 General Purpose Premium Diamond Cores 48 150 10GPCP52150 General Purpose Premium Diamond Cores 52 150 10GPCP65150 General Purpose Premium Diamond Cores 65 150 10GPCP78150 General Purpose Premium Diamond Cores 78 150 10GPCP82150 General Purpose Premium Diamond Cores 82 150 10GPCP91150 General Purpose Premium Diamond Cores 91 150 10GPCP107150 General Purpose Premium Diamond Cores 107 150 10GPCP117150 General Purpose Premium Diamond Cores 117 150 10GPCP127150 General Purpose Premium Diamond Cores 127 150 10GPCP152150 General Purpose Premium Diamond Cores 152 150 10
Diamond Core Accessories
TIMco Code
Description Overall Length (mm)
Fit (mm)
Finish
DCAH88P 88mm Hex Adaptor 88 1/2”BSP - BlackDCAH240P 240mm Hex Adaptor 240 1/2”BSP - BlackDCAS115P 115mm SDS Adaptor 115 1/2” BSP - BlackDCAS240P 240mm SDS Adaptor 240 1/2” BSP - BlackDCE240P 1/2” BSP Extension 240mm 240 1/2”BSP - BlackDCPD13210 13 x 210mm Pilot Drill 210 - 13 S. BlastDCPR225 225mm Taper Pilot Rod 225 - 12 S.BlastDCTD 8 x 75 Taper Drift 75 - 6 Black
1/2” BSP fitment ensures compatibility with most other systems.
Deep 10mm segment for long life.
PremiumCore
Materials
General Materials
Brick Concrete Block
Hard Sandstone
Medium Concrete
>7 KN
KEY: Good - Acceptable
DCPR225DCPD13210DCE240PDCAS240PDCAH240PDCAS115PDCAH88PDCTD
DIA
MO
ND
CORE BITS
92
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Diamond Core Kit
TIMco Code Description
PDCK5 General Purpose Core Kit 5pc.
Silver soldered diamond core kit in a handy wheelable case
Contents
Number Description
1 127mm Core2 52mm Core3 65mm Core4 117mm Core5 38mm Core6 DCE240 - 1/2” BSP Extension 240mm7 DCAS115 - 115mm SDS Adaptor8 DCAH88 - 88mm Hex Adaptor9 8 x 200mm Pilot Drill
10 DCTD - 8 x 75 Taper Drift
Chucks, Keys & Adaptors
TIMco Code
Description Capacity (mm / mount)
Pack Qty
Packs per Carton
KEY 1/2” Chuck, Key & SDS - plus adaptor set 1.5 - 13mm, 1/2” x 20F 1 10KKEY 1/2” Keyless Chuck & SDS - plus adaptor set 2.0 - 13mm, 1/2” x 20F 1 10SHDKC Super Heavy Duty Keyless Chuck 2.0 - 13mm, 1/2” x 20F 1 10HDKC13 Keyless Chuck Heavy Duty 2.0 - 13mm, 1/2” x 20F 1 10SHKC13 Single Handed Keyless Chuck 2.0 - 13mm, 1/2” x 20F 1 10C13 Chuck & Key 1.5 - 13mm, 1/2” x 20F 1 10SDSCA SDS plus to 1/2” chuck adaptor SDS plus to 1/2” x 20M 1 10AS2 Chuck Key S2 To fit 1/2” keyed chuck 1 10
KEY
Silver soldered diamond core kit with wheelable case.
1
3 4
10
9
78
26
5
C13
AS2SDSCA
KKEY
HDKC13
SHDKCSHKC13
Sold In Sets
Sold Individualy
93
DIA
MO
ND
CORE KIT
CHU
CKS, KEYS & A
DA
PTORS
94
RESIN BO
ND
ED CU
TTING
WH
EELS
94
Key FeaturesBonded Abrasives For Metal
TIMco Code Dia.(mm)
Dia. (inch)
Bore (mm)
Thickness (mm)
Type Function Application Max. RPM
Box Qty
FCM10016 100 4 16.0 2.5 Flat Cutting Metal 15,300 50FCM115222 115 4 1/2 22.2 2.5 Flat Cutting Metal 13,300 50FCM125222 125 5 22.2 2.5 Flat Cutting Metal 12,200 50FCM230222 230 9 22.2 3.2 Flat Cutting Metal 6,500 25FCM30020 300 12 20.0 3.2 Flat Cutting Metal 5,000 25FCM350254 350 14 25.4 3.2 Flat Cutting Metal 4,300 25FCMT115222 115 4 1/2 22.2 1.0 Flat Cutting Metal/Inox 13,300 25FCMT125222 125 5 22.2 1.0 Flat Cutting Metal/Inox 12,200 25FCMT230222 230 9 22.2 1.9 Flat Cutting Metal/Inox 6,500 25DGM115222 115 4 1/2 22.2 6.4 Depressed Grinding Metal 13,300 25
Addax reinforced resin bonded cutting wheels are designed and tested for optimum performance and safety and fully meet the requirements of European Standard EN12413
1. DIMENSIONThis is written as Diameter x Thickness x Bore, e.g. 125x3x22mm.
2. EXPIRY DATEThis clearly identifies when a wheel’s shelf life has expired, protecting the user from unnecessary risk.
3. MAXIMUM SPEEDThis is the maximum safe operating speed measured in revolutions per minute, and varies depending on the diameter of the wheel. 4. PERIPHER AL SPEEDThe maximum rated operating speed measured at the edge of the disc in metres per second (m/s). This is constant across the range, as machines are geared differently to ensure that the peripheral speed is the same across the range of diameters.
5. SAFE T Y STANDARDS & REQUIREMENTSAddax resin bonded abrasives are manufactured to European standard EN12413.6.
3 4 5 61 2
6. WHEEL IDENTIFIC ATION CODEThis identifies the characteristics of the disc.Looking at the example:
The materials commonly used to make abrasive discs are;
A = Brown Aluminium oxideThis is a tough, sharp abrasive, used for working metal of high tensile strength e.g. Steel.
WA = White Aluminium oxideThis is very hard, and it’s high purity makes it suitable for use in applications requiring minimum contamination of foreign substances. For instance, Stainless and alloy steels.
C = Black Aluminium oxideUsed for cast iron and non-ferrous materials such as aluminium and copper, non-metallic material such as concrete, brick & stone. G rit Size - Grits 1 to 24 are classed as rough, 30 to 60 medium and 80-220 are fine.G rade - These are L,M,P,Q,R,S,T & U, where L is very fast cutting but wears quickly, and U is very hard and lasts a long time but cuts much more slowly.B ond - B indicates a resin bonded wheel.Reinforcement - F is for fibre glass.
A 30 T B F
Grit Material Grit Size Grade Bond Reinforcement
Materials
Stainless Steel Steel
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
Blade Types
OverviewCutting discs should only be used for cutting applications, and not for grinding. As a general rule, wheels are designed to work similar materials. For example, a hard materials blade is designed to cut media such as engineering brick and reinforced concrete.
To enable this, the metal bond or “matrix” which holds the diamond to the body of the tool is relatively soft, as the diamond will blunt quite quickly and it is necessary to keep releasing fresh diamond to the edge in order to keep cutting. An abrasive materials blade however, has a bond which is harder in order to resist premature release of diamonds which are not yet worn out due to the softer nature of the material it is cutting.
If a hard blade is used in a soft material the matrix will wear very quickly and the blade will not last. Conversely, if an abrasive materials blade is used to cut a hard material, then the diamond will wear out before the hard bond releases new cutting edges, and it will become blunt. However in this case, the blade can be resharpened by running it in an abrasive material (such as insulation block) for a short period.
It is very important to correctly match the core or wheel to the material to be cut.
Safety Standards & Requirements
Is operator safety your main concern?Addax professional diamond blades are manufactured to meet the requirements of European standard EN 13236 by one of the largest producers of diamond superabrasives in the world. The production facilities are regularly audited by the Organisation for Safety of Abrasives and licensed to wear their trademark.
Diamond Super Abrasives
CHIM
AERA
MUL
TI M
ATER
IAL
(MM
SERI
ES)
Diamond Blades SINT
ERED
GE
NERA
LPUR
POSE
(GPE
SERI
ES)
LASE
RGE
NERA
L PUR
POSE
(GPL
SERI
ES)
PREM
. LAS
ERGE
NERA
LPUR
POSE
(GPP
L SER
IES)
SAFETY STANDARDS & REQUIREMENTS EN13236
SEGMENT DEPTH 10mm CRT 12mm TURBO 10mm 7mmUNDERCUT PROTECTION NO NO NO NO
STEEL PIPES & BARS - - -
GRANITE - - -
ENGINEERING BRICK - - -
HEAVILY REINFORCED CONCRETE - - -
HARD CONCRETE 30-55Nmm2 - - -
INDIAN & YORK STONE - - -
CLAY PAVIORS - - -
VITRIFIED CLAY PRODUCTS - - -
MARBLE - - -
HARD FACING BRICKS -
CLAY ROOF TILES
LIGHTLY REINFORCED CONCRETE
HARD SLATE
CONCRETE 15-30Nmm2
GENERAL MATERIALS - KERBS,SLABS & LINTELS
MEDIUM FACING BRICKS
LIMESTONE
CONCRETE PAVIORS
SOFT FACING BRICKS
SOFT SLATE
CONCRETE ROOF TILES
HARD SANDSTONE - -
Page 97 Page 96 Page 96 Page 96
Ceramic Blades SI
NTER
ED
GENE
RAL
PURP
OSE
(GPE
SERI
ES)
PREM
. THI
NCR
T TI
LE &
PO
RCEL
AIN
(TP
SERI
ES)
& REQUIREMENTS EN13236 EN13236
CERAMIC TILES
MARBLE
PORCELAIN
NATURAL STONE
Page 97 Page 97
SAFETY STANDARDS
Performance/Life - = NOT SUITABLE = OCCASIONAL USE ONLY = ACCEPTABLE = GOOD = EXCELLENT
S i n t e r e d B l a d e s
The steel body and the compressed diamond/metal powder are subjected to baking until the powder forms the finished “matrix”.
This is the standard quality blade, and the most economic in terms of purchase price.
L a s e r We l d e d B l a d e sOn these blades, the segment is “hot pressed sintered”, i.e. the matrix
is formed separate to the body under conditions of heat and pressure. This leads to a more dense, longer lasting segment which is then laser welded to the steel body. Laser welding provides a very secure bond between the matrix and the blade body. Blades of this type are usually more economic in terms of cutting length per pound (£).
S i l ve r S o l d e r e d C o r e s a n d C u p W h e e l sIn the case of cup grinding wheels and core bits, a process
known as silver soldering can be employed.This is where hot sintered segments are individually brazed onto the steel body. This is usually because the segment is curved and therefore difficult to laser weld.
S e g m e n t e d B l a d e sThis is where the diamond wheel is split into defined segments. The slots in between the segments allow for cooling and expansion. Turbo
segmented blades have recesses formed into the side walls of the segment which increase dust removal and cutting speed.
C o n t i nu o u s R i m B l a d e sThese blades have no break in the matrix and are used predominantly for cutting
ceramic tiles and decorative stone such as marble. The lack of gaps in the cutting surface reduces chipping of the material being cut.
C o n t i nu o u s R i m Tu r b o B l a d e sThese are a hybrid between continuous
rim and segmented blades, which can give a faster, cleaner cut in certain materials.
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
95
General Purpose Sintered
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
GPE115222 General Purpose Sintered 115 4 1/2 22.2 7 Cold SinteredGPE230222 General Purpose Sintered 230 9 22.2 7 Cold SinteredGPE30020 General Purpose Sintered 300 12 20.0 7 Cold Sintered
Key Features
An economic product for cutting medium density building materials such as common bricks, paving slabs, kerbs and lintels.
STANDARDS Approved to European standard EN13236.
Materials
<50 N/mm2
13-50 N/mm2
General Purpose Laser Welded
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
GPL115222 General Purpose Laser 115 4 1/2 22.2 10 LaserGPL125222 General Purpose Laser 125 5 22.2 10 LaserGPL230222 General Purpose Laser 230 9 22.2 10 LaserGPL30020 General Purpose Laser 300 12 20.0 10 Laser
Key Features
A cost effective laser welded blade with longer life than the sintered blades. For use in medium density building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone. • Deep 10mm diamond segment for longer life.
STANDARDS Approved to European standard EN13236 and oSa requirements.
Materials
<50 N/mm2
13-50 N/mm2
General Purpose Premium Laser Welded
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
GPPL115222 General Purpose Premium Laser 115 4 1/2 22.2 12 Premium LaserGPPL125222 General Purpose Premium Laser 125 5 22.2 12 Premium LaserGPPL230222 General Purpose Premium Laser 230 9 22.2 12 Premium LaserGPPL30020 General Purpose Premium Laser 300 12 20.0 12 Premium LaserGPPL300222 General Purpose Premium Laser 300 12 22.2 12 Premium LaserGPPL35020 General Purpose Premium Laser 350 14 20.0 12 Premium LaserGPPL350254 General Purpose Premium Laser 350 14 25.4 12 Premium LaserGPPL450254 General Purpose Premium Laser 450 18 25.4 12 Premium LaserGPPL600254 General Purpose Premium Laser 600 24 25.4 12 Premium LaserBR22220 Reducing Bush - Reduces bore from 22.2mm to 20mm on >300mm bladesBR25420 Reducing Bush - Reduces bore from 25.4mm to 20mm on >350mm blades
Key Features
A premium quality laser welded, turbo segmented blade. For use in building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone. • Extra deep 12mm turbo diamond segments for
longer life and faster cutting.
STANDARDS Approved to European standard EN13236 and oSa requirements.
Materials
<50 N/mm2
>15 N/mm2
13-50 N/mm2
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
96
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
DIA
MO
ND
BLAD
ES & W
HEELS
Key Features
A top quality blade for cutting porcelain, ceramics and marble. Continuous turbo design for minimal chipping of the material, while the special thin body reduces resistance and increases speed of cut. Can be used wet or dry.
STANDARDS Approved to European standard EN13236.
Porcelain & Ceramic - Thin Turbo
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
TP115222 Thin Turbo Ceramic 115 4 1/2 22.2 10 Hot SinteredTP125222 Thin Turbo Ceramic 125 5 22.2 10 Hot SinteredTP230222 Thin Turbo Ceramic 230 9 22.2 10 Hot Sintered
Materials
Key Features
For use with angle grinders and portable tile cutting machines. Suitable for cutting ceramic tiles and marble with minimal chipping. • Can be used wet or dry.
STANDARDS Approved to European standard EN13236.
Ceramic Continuous Rim - Sintered
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
TE10016 Continuous Rim Ceramic & Tile 100 4 16.0 5 Cold SinteredTE115222 Continuous Rim Ceramic & Tile 115 4 1/2 22.2 5 Cold SinteredTE150222 Continuous Rim Ceramic & Tile 150 6 22.2 5 Cold SinteredTE180222 Continuous Rim Ceramic & Tile 180 7 22.2 5 Cold SinteredTE180254 Continuous Rim Ceramic & Tile 180 7 25.4 5 Cold Sintered
Materials
Key Features
A high quality multi-material blade designed for cutting construction materials .Continuous rim turbo segmented blade for smooth cutting of construction material and reinforced concrete.
STANDARDS Approved to European standard EN13236.
Materials
<50 N/mm2
>15 N/mm2
13-50 N/mm2
Chimaera Multi-Material - Hot Sintered
TIMco Code
Description Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height
(mm)
Weld Type
MM115222 Multi-Material Continuous Turbo 115 4 1/2 22.2 10 Hot SinteredMM125222 Multi-Material Continuous Turbo 125 5 22.2 10 Hot SinteredMM230222 Multi-Material Continuous Turbo 230 9 22.2 10 Hot SinteredMM30020 Multi-Material Continuous Turbo 300 12 20.0 10 Hot SinteredMM300222 Multi-Material Continuous Turbo 300 12 22.2 10 Hot SinteredMM35020 Multi-Material Continuous Turbo 350 14 20.0 10 Hot SinteredMM350254 Multi-Material Continuous Turbo 350 14 25.4 10 Hot SinteredBRMM22220 Reducing Bush - Reduces bore from 22.2mm to 20mm on >300mm bladesBRMM25420 Reducing Bush - Reduces bore from 25.4mm to 20mm on >350mm blades
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
97
DIA
MO
ND
BLAD
ES & W
HEELS
Key Features
Materials
An economic product for raking mortar from between bricks prior to re-pointing.
Mortar Raking Blade - Sintered
TIMco Code
Dia.(mm)
Dia.(inch)
Bore(mm)
Blade Thickness(mm)
Segment Height
(mm)
Weld Type
MRE115 115 4 1/2 22.2 6.35 7 Cold SinteredMRE125 125 5 22.2 6.35 7 Cold Sintered
Mortar
A double row, silver brazed wheel for smoothing and removing shutter marks from medium density concrete.
Cup Grinding Wheels - General Purpose
TIMco Code
Dia.(mm)
Dia. (inch)
Bore(mm)
Segment Height(mm)
Weld Type
CGDE115 115 4 1/2 22.2 10 Silver Brazed
Key Features
Materials
Concrete
A top quality product for raking mortar from between bricks prior to re-pointing. • 10mm silver brazed segments for a long service life.
STANDARDS Approved to European standard EN13236 and oSa requirements
Mortar Raking Blade - Silver Brazed
TIMco Code
Dia.(mm)
Dia. (inch)
Bore(mm)
Blade Thickness(mm)
Segment Height
(mm)
Weld Type
MRP115 115 4 1/2 22.2 6.35 10 Silver BrazedMRP125 125 5 22.2 6.35 10 Silver Brazed
Key Features
Materials
Mortar
98
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
DIA
MO
ND
BLAD
ES & W
HEELS
High quality Jigsaw Blades available in a range of blade styles and materials, suitable for a wide range of cutting applications.
Jigsaw Blade Material Types1. High Carbon Steel (HCS)High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards.
2. High Speed Steel (HSS)Hardened high speed steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals.
3. Bi-Metal (BIM)Combining the flexibility of an HCS body with an HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade.
Special Blade1. Reverse CutThese blades have the tooth pattern reversed so that they cut on the downstroke rather than the upstroke. This prevents the splintering of decorative surfaces, such as kitchen worktops. The Addax AHC12R (T101BR) and the bi-metal AHC12Rbi (T101BRF) have this pattern.
2. Curve Cut BladesThese blades have a reduced blade depth to allow them to perform curved cuts more easily. The Addax AHGS24 (T244D), AHC12K (T101AO) and AHW12K (T119BO) are examples of this type.
4. Extra Thick BladeJigsaw blades tend to curve slightly sideways when cutting thick wood. To compensate for this, the Addax AHC14D (T101DP) is made from a thicker plate to resist these forces.
WOOD/LAMINATES/METAL/PLASTICJIGSAW AND SABRE SAW BLADES
Jigsaw Blades
Blade Geometry
MSS - Milled and Side Set TeethThis is the basic tooth pattern used on the entry level blades. A quick but fairly rough cut into wood, plastics and non-ferrous metals such as aluminium.
GSS - Ground and Side Set TeethFast cutting blades for use in wood.
GTG - Ground and Taper Ground TeethThese top quality blades give a clean, quick cut in both wood and plastic.
MWS - Milled and Wavy Set TeethThis pattern is used to give a fine, straight cut. It appears on wood cutting blades such as the AHW12 (T119B) and the metal and plastic cutting AMG11 (T118A).
SSS - Side Set and SharpenedThis configuration gives a fast, medium cut and is used on blades such as the AHGS14 (T144D).
Materials
Softwood Hardwood Green Wood
Plasterboard MDF Sandwich Material
Plastic Profile Polycarbonate
Steel Aluminium Stainless Steel
Glass Glass Fibre Insulation Material
Perspex Ceramic Tiles
Thin Sheet Metal Metal Pipe Non Ferrous Metal
Plywood Chipboard Laminate Board
9999
Blades for use with woods and plastics
Economy High Carbon Steel Blades
High Carbon Steel Blades
Premium High Carbon Steel Blades
Flexible Bi-Metal Blades - Long Life
SABRE Flexible Bi-Metal Blades - Long Life
SABRE High Carbon Steel Blades
Images shown are for illustation purposes only.
Mat
eria
lsHa
rd W
ood
Soft
Woo
dGr
een
Woo
dPl
ywoo
dCh
ipbo
ard
MDF
Lam
inat
ed
Boar
dDr
ywal
lPl
astic
Insu
latio
n
Mat
eria
l
Key: MWS - Milled and Wavy Set Teeth, MSS - Milled and Side Set Teeth
SSS - Side Set and Sharpened, GTG - Ground and Taper Ground Teeth
TIMco Code
Bosch Equiv.
Working Length
(mm)
Overall Length
(mm)
Cut Depth (mm)
Tooth Pitch (mm)
Teeth Per
Inch
ToothType
Type of Cut
Pack Qty
AHW12 T119B 50 76.5 2.0 - 15 2.0 13 MWS Straight • Smooth • Clean 5
AHW12K T119BO 50 76 2.0 - 15 2.0 2 MWS Curved • Smooth • Clean 5
AHG13 T111C 75 100 4.0 - 50 3.0 8.5 MSS Straight • Coarse 5
AHGS14 T144D 75 100 5.0 - 50 4.0 3.35 SSS Straight • Quick • Coarse 5
AHGS24 T244D 75 100 5.0 - 50 4.0 3.35 SSS Curved • Quick • Coarse 5
AHC12K T101AO 50 76.5 1.5 - 15 1.35 19 GTG Curved • Fine • Clean 5
AHC12 T101B 75 100 3.0 - 30 2.5 10 GTG Straight • Fine • Clean 5
AHC12R T101BR 75 100 3.0 - 30 2.5 10 GTG Straight • Clean • Down Cut 5
AHC32R 105 132 3.0 - 65 2.5 10 GTG Straight • Clean • Down Cut 5
AHC14 T101D 75 100 10 - 45 4.0 6.35 GTG Straight • Clean 5
AHC14D T101DP 75 100 10 - 45 4.0 6.35 GTG Straight • Clean 5
AHC12BI T101BF 75 100 3.0 - 30 2.5 10 GTG Straight • Clean 5
AHC12RBI T101BRF 75 100 3.0 - 30 2.5 10 GTG Clean • Down Cut 5
AHGS14BI T144DF 75 100 5.0 - 50 4.0 3.35 SSS Straight • Quick • Coarse 5
A3021/150 S644D 130 150 6.0 -100 6.0 4.3 MSS Straight • Medium 5
A3029/240 S1531L 220 240 6.0 -190 6.0 4/5 SSS Straight • Medium 5
A3021/300BI S1411DF 280 300 6.0 -250 6.0 6 MSS Strai ght • Medium 5
100
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
JIGSAW
& SA
BRE B
LAD
ES FOR W
OO
DS &
PLASTICS
Blades for use with metals, plastics and ceramics
* Max cut depth for pipes and profiles
Flexible Bi-Metal Blades - Long Life
High Speed Steel Blades
Special Blades - Long Life
SABRE Flexible Bi-Metal Blades - Long Life
Choose a tooth pitch to suit the material - fine pitch (32T) for thinner materials, a coarser pitch (18T) for thicker steel. The teeth should point towards the front of the saw and cut on the push stroke. Ideally, at least three teeth should be in the material.
Bi-Metal Hacksaw BladesTIMco Code Length (mm) Teeth per Inch Packaging Box Qty
HSB18 300 18 Plastic Box 100
HSB24 300 24 Plastic Box 100
HSB32 300 32 Plastic Box 100
Images shown are for illustation purposes only.
Stee
l
Mat
eria
ls
Met
al Sh
eet
Stai
nles
s Ste
elAl
umin
ium
Non
Ferro
us
Met
als
Pipe
s
Profi
les
Plas
tic
Acry
lic/p
ersp
ex
Sand
wich
M
ater
ials
Key: MWS - Milled and Wavy Set Teeth, MSS - Milled and Side Set Teeth
SSS - Side Set and Sharpened, GTG - Ground and Taper Ground TeethKey: MWS - Milled and Wavy Set Teeth, MSS - Milled and Side Set Teeth GTG - Ground and Taper Ground Teeth
TIMco Code
Bosch Equiv.
Working Length
(mm)
Overall Length
(mm)
Cut Depth (mm)
Tooth Pitch (mm)
Teeth Per
Inch
ToothType
Type of Cut
* * * *
Pack Qty
AMG107 T118G 55 76.5 0.5 - 1.5 0.7 36 MWS Straight • Extra Fine 5
AMG11 T118A 55 76.5 1.2 - 3.0 1.2 21 MWS Straight • Fine 5
AMG21 T218A 55 76.5 1.2 - 3.0 1.2 21 MWS Curved • Fine 5
AMG31 T318A 105 132 1.0 - 3.0 (65*) 1 25 MWS Straight • Fine 5
AMG12 T118B 55 76.5 2.5 - 6.0 2 13 MWS Straight • Medium 5
AMG32 T318B 105 132 2.5 - 6.0 (65*) 1.8 14 MWS Straight • Medium 5
AK14 T127D 75 100 3.0 - 15 3 8.5 MSS Straight • Medium 5
AK24 T227D 75 100 3.0 - 15 3 8.5 MSS Curved • Medium 5
AMG11BI T118AF 55 76.5 1.2 - 3.0 1.2 21 MWS Straight • Fine 5
AMG12BI T118BF 55 76.5 2.5 - 6.0 2 13 MWS Straight • Medium 5
AMC12BI T101AF 75 100 2.0 - 20 2.5 10 GTG Straight • Clean 5
A3013/150 S922BF 130 150 3.0 - 8.0 1.8 14 MWS Straight • Fine 5
A3013/200 S1122BF 180 200 3.0 - 8.0 1.8 14 MWS Straight • Fine 5
A3014/150 S922EF 130 150 1.5 - 4.0 1.4 18 MWS Straight • Fine 5
A3014/200 S1122EF 180 200 1.5 - 4.0 1.4 18 MWS Straight • Fine 5
A3015/150 S922AF 130 150 0.7 - 3.0 1.0 24 MWS Straight • Extra Fine 5
A3015/200 S1122AF 180 200 0.7 - 3.0 1.0 24 MWS Straight • Extra Fine 5
A3018/280 - 260 280 3.5 - 5.0 2.5 10 MWS Straight • Coarse 5
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
101
JIGSAW
, SAB
RE AN
D H
ACK
SAW B
LAD
ES FOR M
ETALS &
PLASTICS
Size Length(mm)
Coating Candy Jar TIMco Code
Pack Qty
Mini Bit Pack TIMco Code
Pack Qty
Blister Pack TIMco Code
Pack Qty
Pozi 2 25 Diamond - - - - 2CB25DB 2
Pozi 1 25 Ti-CN - - 1CB25TCP 10 - -
Pozi 3 25 Ti-CN - - 3CB25TCP 10 - -
Pozi 1 25 TiN 1CB25TJ 100 1CB25TP 10 - -
Pozi 2 25 TiN 2CB25TJ 100 2CB25TP 10 - -
Pozi 3 25 TiN 3CB25TJ 100 3CB25TP 10 - -
Pozi 1 50 TiN - - 1CB50TP 10 - -
Pozi 2 50 TiN 2CB50TJ 50 2CB50TP 10 - -
Pozi 3 50 TiN - - 3CB50TP 10 - -
Pozi 1 25 Grey 1CB25GJ 100 1CB25GP 10 1CB25GB 2
Pozi 2 25 Grey 2CB25GJ 100 2CB25GP 10 2CB25GB 2
Pozi 3 25 Grey 3CB25GJ 100 3CB25GP 10 3CB25GB 2
Pozi 1 50 Grey - - 1CB50GP 10 1CB50GB 1
Pozi 2 50 Grey 2CB50GJ 50 2CB50GP 10 2CB50GB 1
Pozi 3 50 Grey - - 3CB50GP 10 3CB50GB 1
Pozi 2 100 Grey - - - - 2CB100GB 1
Pozi 2 150 Grey - - - - 2CB150GB 1
Pozi 2 300 Grey - - - - 2CB300GB 1
Cross-recess (Pozi) Driver Bits
Torx Bits
Insert Bits
Insert Bits
Insert Bits
Insert Bits
Power Bits
Power Bits
S2 tool steel body with an industry grade diamond like carbon coating, firmly bonded to a Titanium Nitride layer. This gives an outstanding edge hardness of 2300hV, protecting against wear.
Diamond Grip Diamond coated screwdriver bits offer maximum grip thanks to a coating of fine particles securely bonded to the tip greatly reducing “camout”. The torque relieving shank helps to absorb torque peaks and extends bit life.
Titanium Carbon
Grey Phosphate
Titanium Nitride (TiN) coating over an S2 modified tool steel body, giving an improved edge hardness of 1800hv to protect against wear. The result is excellent performance at a very reasonable cost.
S2 modified tool steel with a rust resistant grey phosphate coating to offer 680hv edge hardness and far superior performance when compared to standard chrome vanadium bits
Titanium Nitride
Pozi 1 25 Cr-V 00001CB 100
Pozi 3 25 Cr-V 00003CB 100
Torx 30 25 TiN 30TX25TJ 100 - - 30TX25GB 2
Torx 10 25 Grey - - 10TX25GP 10 10TX25GB 2
Torx 20 25 Grey - - 20TX25GP 10 20TX25GB 2
Torx 25 25 Grey - - 25TX25GP 10 25TX25GB 2
Torx 30 25 Grey 30TX25GJ 100 30TX25GP 10 30TX25GB 2
Torx 40 25 Grey - - 40TX25GP 10 - -
Titanium Nitride Titanium Nitride (TiN) coating over an S2 modified tool steel body, giving an improved edge hardness of 1800hv to protect against wear. The result is excellent performance at a very reasonable cost.
Grey Phosphate S2 modified tool steel with a rust resistant grey phosphate coating to offer 680hv edge hardness and far superior performance when compared to standard chrome vanadium bits
Cr-V Driver Bits BoxedStandard chrome vanadium bits.
102
AD
DA
X - CRO
SS-RECESS (POZI) D
RIVER B
ITS
Insert Bits
Power Bits
Size Length(mm)
Coating Candy Jar TIMco Code
Pack Qty
Mini Bit Pack TIMco Code
Pack Qty
Blister Pack TIMco Code
Pack Qty
PH 2 25 Diamond - - - - 2PH25DB 2
PH 1 25 TiN - - 1PH25TP 10 1PH25TB 2
PH 2 25 TiN 2PH25TJ 100 2PH25TP 10 - -
PH 3 25 TiN - - 3PH25TP 10 3PH25TB 2
PH 1 50 TiN - - 1PH50TP 10 - -
PH 2 50 TiN 2PH50TJ 50 2PH50TP 10 - -
PH 1 25 Grey - - 1PH25GP 10 - -
PH 2 25 Grey 2PH25GJ 100 2PH25GP 10 2PH25GB 2
PH 3 25 Grey - - 3PH25GP 10 3PH25GB 2
PH 4 38 Grey - - - - 4PH38GB 1
PH 1 50 Grey - - 1PH50GP 10 1PH50GB 1
PH 2 50 Grey 2PH50GJ 50 2PH50GP 10 2PH50GB 1
PH 3 50 Grey - - 3PH50GP 10 3PH50GB 1
PH 2 100 Grey - - - - 2PH100GB 1
PH 2 150 Grey - - - - 2PH150GB 1
PH 2 300 Grey - - - - 2PH300GB 1
PH 2 25 Grey 2PH25DWGJ 100 - - - -
Phillips Driver Bits
Insert Bits
Power Bits
Diamond Grip Diamond coated screwdriver bits offer maximum grip thanks to a coating of fine particles securely bonded to the tip greatly reducing “camout”. The torque relieving shank helps to absorb torque peaks and extends bit life.
Grey Phosphate S2 modified tool steel with a rust resistant grey phosphate coating to offer 680hv edge hardness and far superior performance when compared to standard chrome vanadium bits
PH 2 25 Cr-V 00002PB 100
PH 2 50 Cr-V - -
Cr-V Driver Bits BoxedStandard chrome vanadium bits.
31 Piece 25mm Driver Bit Set Addax Code: DBSETG31
Pozidriv: PZ1, PZ2 (x5), PZ3 (x2) Square: No2 Phillips: PH1, PH2 (x3), PH3 (x2)Hex: 4, 5, 6, 7 Torx: T10, T15, T20, T25, T30, T40 Adaptor: Quick releaseSlotted: 3.5x0.6, 4.5x0.6, 5.0x0.8, 5.5x1.0, 8.0x1.2
Titanium Nitride (TiN) coating over an S2 modified tool steel body, giving an improved edge hardness of 1800hv to protect against wear. The result is excellent performance at a very reasonable cost.
S2 modified tool steel with a rust resistant grey phosphate coating to offer 680hv edge hardness and far superior performance when compared to standard chrome vanadium bitsDrywall
Titanium Nitride
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
103
AD
DA
X - PH
ILLIPS DRIV
ER BITS &
ASSO
RTED B
IT SET
Size Length(mm)
Coating Blister Pack TIMco Code
Pack Qty
3.0 x 0.5 25 Grey 3005SL25GB 2
4.5 x 0.6 25 Grey 4506SL25GB 2
5.5 x 0.8 25 Grey 5508SL25GB 2
6.0 x 1.0 25 Grey 6010SL25GB 2
7.0 x 1.2 25 Grey 7012SL25GB 2
10.0 x 1.6 25 Grey 1016SL25GB 2
No.2 25 Grey 2SQ25GB 2
No. 2 25 Cr-V 000025SBS 100
Size Length(mm)
Coating Blister Pack TIMco Code
Pack Qty
3.0mm 25 Grey 3HX25GB 2
4.0mm 25 Grey 4HX25GB 2
5.0mm 25 Grey 5HX25GB 2
6.0mm 25 Grey 6HX25GB 2
8.0mm 25 Grey 8HX25GB 2
5/16” 65 Grey 516SDB 1
8mm 65 Grey 8SDB 1
11mm 65 Grey 11BHSDB 1
1/4” 65 Cr-V 00014SOCKET 10
Slotted, Hex , Square Driver Bits & Nut Setters
Magnetic Adaptors
Slotted - Grey Phosphate Hexagonal - Grey Phosphate
Nut Setters - Grey Phosphate
Cr-V Nut Setters Boxed
Size Length(mm)
Coating Candy Jar TIMco Code
Pack Qty
Blister Pack TIMco Code
Pack Qty
1 Piece Stainless Steel 60 Bright - - 60MAB 1
1 Piece Stainless Steel with Circlip 60 Bright - - 60MASSCB 1
2 Piece 60 Bright/Black 60MAJ 20 - -
2 Piece with Circlip 60 Bright/Black 60MACJ 20 60MACB 1
2 Piece with Circlip 150 Bright/Black - - 150MACB 1
2 Piece with Circlip 300 Bright/Black - - 300MACB 1
2 Piece 60 Bright/Black 60MAQRJ 20 60MAQRB 1
2 Piece 150 Bright/Black - - 150MAQRB 1
2 Piece 300 Bright/Black - - 300MAQRB 1
SDS Plus 80 Bright/Grey - - 80MASDSCB 1
Magnetic Adaptors
Quick Release Magnetic Adaptors
SDS Magnetic Adaptor
Insert Bits Insert Bits
Grey Phosphate - S2 modified tool steel with a rust resistant grey phosphate coating to offer 680hv edge hardness and far superior performance when compared to standard chrome vanadium bits
Cr-V - Standard chrome vanadium bits.
Square - Grey Phosphate
Cr-V Driver Bits BoxedStandard chrome vanadium bits.
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
104
AD
DA
X - D
RIVER B
ITS
Builder's Metal Work
Products
TIMco Code
Width(mm)
Height (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
47100MH 47 100 47 x 100 80 3047125MH 47 125 47 x 125 80 3047147MH 47 140 47 x 150 80 2047175MH 47 165 47 x 175 75 2047200MH 47 190 47 x 200 75 2047225MH 47 215 47 x 225 75 20
Hanger Height (mm) 100 125 140 165 190 215
Joist Height (mm) 100 125 150 175 200 225
Width (mm) 47 47 47 47 47 47Characteristic value (kN) Eurocode 6 9.7 9.7 9.7 9.7 9.7 9.7Safe working load (kN) BS5628 5.4 5.4 5.4 5.4 5.4 5.4
Technical Data
Single Piece Masonry Hangers
• Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.
Key Features
• Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.
Key FeaturesWelded Masonry Hangers - Galvanised Steel
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
TIMco Code
Width(mm)
Height (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
75150WMH 75 140 75 x 150 80 2575175WMH 75 165 75 x 175 80 2075200WMH 75 190 75 x 200 80 2075225WMH 75 215 75 x 225 80 2090150WMH 90 140 90 x 150 80 1590175WMH 90 165 90 x 175 80 1590200WMH 90 190 90 x 200 80 1590225WMH 90 215 90 x 225 80 15100150WMH 100 140 100 x 150 75 15100175WMH 100 165 100 x 175 75 15100200WMH 100 190 100 x 200 75 15100225WMH 100 215 100 x 225 75 15150200WMH 150 190 150 x200 90 10150225WMH 150 215 150 x 225 90 10
Hanger Height (mm) 140 165 190 215 140 165 190 215 140 165 190 215 190 215
Joist Height (mm) 150 175 200 225 150 175 200 225 150 175 200 225 200 225
Width (mm) 75 75 75 75 90 90 90 90 100 100 125 125 150 150Characteristic value (kN) Eurocode 6 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7Safe working load (kN) BS5628 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Technical Data
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
TIMB
ER TO M
ASO
NRY H
AN
GERS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Masonry HangerThe TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork.
Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance, for ultimate corrosion resistance use stainless steel.
106
Welded Masonry Hangers - Stainless Steel
Welded Masonry Hanger
Multi-Functional Hangers
• Manufactured from stainless steel to give ultimate corrosion resistance.
Key Features
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information Hanger Height (mm) 100 140 165 190 215 140 165 190 215
Joist Height (mm) 100 140 175 200 225 140 175 200 225
Width (mm) 90 90 100 100 100 100 125 125 150Characteristic value (kN) Eurocode 6 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7Safe working load (kN) BS5628 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Technical Data
Stainless Steel items can be purchased in singles.
Installation guidelines
• Ensure the back plate of the hanger sits flat against the vertical wall and is securely fixed.
• Maximum gap between the wall and joist is 6mm.
• A minimum of three block courses
(675mm) must be constructed above the hanger before the joist is loaded.
• Allow enough time for the mortar to cure before any load is applied.
• Joist should be square cut and sit tight to the back of the hanger.
• Nail the side flanges with 3.75 x 30 galvanised square twist nails.
• Hangers 150mm and above are manufactured 10mm less to allow for notching and regularised timber.
Hanger Height (mm) 97 150 179 229 214 128 157 207 123 152 202 127 177
Overall Length (mm) 240 346 404 504 504 346 404 504 346 404 504 404 504
Width (mm) 47 47 47 47 76 90 90 90 100 100 100 150 150Characteristic value (kN) Eurocode 6 12.8 12.8 19.8 25.1 25.1 12.8 19.8 25.1 12.8 19.8 25.1 19.8 25.1Safe working load (kN) BS5628 - Short Term - 6.4 9.9 12.55 12.55 6.4 9.9 12.55 6.4 9.9 12.55 9.9 12.55Safe working load (kN) BS5628 - Medium - 6.1 9.4 11.95 11.95 6.1 9.4 11.95 6.1 9.4 11.95 9.4 11.95Safe working load (kN) BS5628 - Long Term - 5.3 8.25 10.45 10.45 5.3 8.25 10.45 5.3 8.25 10.45 8.25 10.45Number of Nails 18 25 33 49 49 25 33 49 25 33 49 33 49
Technical Data
TIMco Code
Gauge (mm)
Width(mm)
Height (mm)
Overall Length (mm)
Joist Bearing (mm)
Box Quantity
47240MMFH 1.2 47 97 240 85 2547346MFH 2.0 47 150 346 85 3047404MFH 2.0 47 179 404 85 3047504MFH 2.0 47 229 504 85 2076346MFH 2.0 76 135 346 85 3076404MFH 2.0 76 164 404 85 3076504MFH 2.0 76 214 504 85 2090504MFH 2.0 90 207 504 85 20100346MFH 2.0 100 123 346 85 30100404MFH 2.0 100 152 404 85 30100504MFH 2.0 100 202 504 85 20150404MFH 2.0 150 127 404 85 30150504MFH 2.0 150 177 504 85 20
TIMco Multi-Functional HangerThe TIMco Multi Functional Hanger range has been developed for medium to heavy duty timber to timber applications.
Designed for use with different fixings to give greater flexibility and improved performance.
TIMB
ER TO M
ASO
NRY &
TIMB
ER TO TIM
BER H
AN
GERS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
107
TIMco Code
Width(mm)
Height (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
47100WMHS 47 100 47 x 100 80 3047150WMHS 47 140 47 x 150 80 2047175WMHS 47 165 47 x 175 80 2047200WMHS 47 190 47 x 200 80 2047225WMHS 47 215 47 x 225 80 20100150WMHS 100 140 100 x 150 80 15100175WMHS 100 165 100 x 175 80 15100200WMHS 100 190 100 x 200 80 15100225WMHS 100 215 100 x 225 80 15
Joist Dimensions W x D to D (mm) 125 x 100 to 225
150 x 100 to 225
47 x 100 to 225
76 x 100 to 225
100 x 100 to 225
Width (mm) 125 150 50 76 100Characteristic value (kN) Eurocode 5 15.44 15.44 15.44 15.44 15.44Safe working load (kN) BS5628 - Short Term 7.72 7.72 7.72 7.72 7.72Safe working load (kN) BS5628 - Medium Term 7.35 7.35 7.35 7.35 7.35Safe working load (kN) BS5628 - Long Term 6.43 6.43 6.43 6.43 6.43Number of Nail holes 32 32 32 32 32
Technical Data
Joist size W x D to D (mm) 44 x 125 to 220
47 x 125 to 220
63 x 125 to 200
75 x 125 to 200
90 x 125 to 200
100 x 125 to 200
125 x 100 to 225
150 x 100 to 225
Width (mm) 44 47 63 75 90 100 125 150Characteristic value (kN) Eurocode 5 14.41 14.41 14.41 14.41 14.41 14.41 15.44 15.44Safe working load (kN) BS5628 - Short Term 7.21 7.21 7.21 7.21 7.21 7.21 7.72 7.72Safe working load (kN) BS5628 - Medium Term 6.86 6.86 6.86 6.86 6.86 6.86 7.35 7.35Safe working load (kN) BS5628 - Long Term 6.0 6.0 6.0 6.0 6.0 6.0 6.43 6.43Number of Nail holes 23 23 23 23 23 23 32 32
Technical Data
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
44TH 44 306 44 x 125 to 220 60 10047TH 47 305 47 x 125 to 220 60 10063TH 63 297 63 x 125 to 220 60 10075TH 75 291 75x 125 to 220 60 10090TH 90 283 90 x 125 to 220 60 100100TH 100 278 100 x 125 to 220 60 100
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Can be purchased in singles
Timber Hangers - No Tag
Timber Hangers - Standard
• 0.8mm Pre-Galvanised Steel
• Easy fixing of plaster board.
• Superior design allows the use of fewer nails for faster installation.
Key Features
• Increased leg lengths, all widths can take up to a 225mm deep joist
Key Features
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Timber Hangers - Galvanised Steel
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
125TH 125 300 125 x 100 to 225 50 50150TH 150 300 150 x 100 to 225 50 50
Timber Hangers - Stainless Steel TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
47THS 47 275 47 x 100 to 225 50 10076THS 76 300 76 x 100 to 225 50 100100THS 100 300 100 x 100 to 225 50 100
TIMB
ER TO TIM
BER H
AN
GERS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Timber HangerThe TIMco Timber Hanger range has been designed to give a quick and simple solution for various timber to timber connections such as joists and stairwell trimmings.
Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance, for ultimate corrosion resistance use stainless steel.
108
TIMco Mini Timber HangerDesigned to give a small and economic light weight timber to timber connection such as loft hatches and decking. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance, for ultimate corrosion resistance use stainless steel.
Joist Dimensions (mm) 44 x 150 to 250
47 x 150 to 250
76 x 175 to 250
90 x 150 to 250
100 x 150 to 250
125 x 175 to 250
150 x 175 to 250
Width (mm) 44 47 76 90 100 125 150Characteristic value (kN) Eurocode 5 28.04 28.04 28.04 28.04 28.04 28.04 28.04Safe working load (kN) BS5628 - Short Term 14.02 14.02 14.02 14.02 14.02 14.02 14.02Safe working load (kN) BS5628 - Medium Term 13.35 13.35 13.35 13.35 13.35 13.35 13.35Safe working load (kN) BS5628 - Long Term 11.68 11.68 11.68 11.68 11.68 11.68 11.68
Technical Data
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
44450LTH 44 453 44 x 150 to 250 50 2547450LTH 47 445 47 x 150 to 250 50 2576450LTH 76 435 76 x 175 to 250 50 2590450LTH 90 425 90 x 150 to 250 50 25100450LTH 100 420 100 x 150 to 250 50 25125450LTH 125 450 125 x 175 to 250 50 15150450LTH 150 450 150 x 175 to 250 50 15
Long Leg Timber Hangers - Galvanised Steel
Material Galvanised Steel Stainless Steel
Joist Dimensions (mm) 44 x 75 to 100
47 x 75 to 100
44 x 75to 150
47 x 75to 150
Width (mm) 44 47 44 47Characteristic value (kN) Eurocode 5 8.34 8.34 9.5 9.5Safe working load (kN) BS5628 - Short Term 4.17 4.17 4.75 4.75Safe working load (kN) BS5628 - Medium Term 3.97 3.97 4.53 4.53Safe working load (kN) BS5628 - Long Term 3.47 3.47 3.96 3.96Number of Nail holes 14 14 20 20
Technical Data
Mini Timber Hangers - Galvanised Steel
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
44THM 44 68 44 x 75 to 100 50 15047THM 47 67 47 x 75 to 100 50 150
Mini Timber Hangers - Stainless Steel TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
44THMS 44 97 44 x 100 to 150 50 15047THMS 47 96 47 x 100 to 150 50 150
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Mini Timber Hangers
• Ensure the back plate of the hanger sits flat against the timber.
• Joist should be square cut and sit tight to the back of the hanger .
• Fix the joist in every hole with 3.75 x 30 galvanised square twist nails (for stainless steel applications use 2.36 x 30 stainless steel annular ringshank nails).
Installation guidelines
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
TIMB
ER TO TIM
BER H
AN
GERS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIMco Long Leg Timber HangerThe TIMco long leg timber hangers are an extended leg version of the TIMco timber hangers. Specifically designed for deeper timber to timber applications. Ideal for loft conversions and “underslung” floor joist applications where the hanger extends below the supporting beam. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance.
109
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bend Length(mm)
Box Quantity
600ERS 36 1.4 600 100 10800ERS 36 1.4 800 100 101000ERS 36 1.4 1000 100 101200ERS 36 1.4 1200 100 101600ERS 36 1.4 1500 100 10
Engineered Heavy Duty Bent Restraint Straps
• Lightweight design makes it easy to handle.
• No need to notch joists making it easier and quicker to install.
• Easier to build into brickwork courses.
• More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap.
• One design for both horizontal and vertical applications.
Key Features
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
For Vertical applications:
• Use min 10No 3.75x30mm sq. twist nails or 6No 4mmx40mm screws (drilled and plugged) into the masonry.
• Use min 2No 3.75x30mm sq. twist nails into wall plate.
For Horizontal applications:
• Use min 7No 3.75x30mm sq. twist nails or equivalent fixed to timber joists/rafters.
Installation guidelines
"A NEW innovative designthat matches the performance
of a traditional heavy duty restraint strap."
ENG
INEERED
HEAV
Y DU
TY RESTRA
INT STR
APS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Engineered Heavy Duty Restraint StrapA NEW innovative design that matches the performance of a traditional heavy duty restraint strap whilst giving a flatter fit to reduce the need for notching. Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint.
110
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Flat Heavy Duty Restraint Straps - Galvanised Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
1000FRSH 27.5 4.0 1000 - 10
Twisted Heavy Duty Restraint Straps - Galvanised Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Twist Length(mm)
Box Quantity
600TRSH 27.5 4.0 600 100 101000TRSH 27.5 4.0 1000 100 10
Bent Heavy Duty Restraint Straps - Galvanised Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
600BRSH 27.5 4.0 600 100 10800BRSH 27.5 4.0 800 100 101000BRSH 27.5 4.0 1000 100 101200BRSH 27.5 4.0 1200 100 101500BRSH 27.5 4.0 1500 100 101600BRSH 27.5 4.0 1600 100 10
Bent Heavy Duty Restraint Straps - Stainless SteelTIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
1000BRSHS 27.5 4.0 600 100 101200BRSHS 27.5 4.0 1000 100 10
• Standard stock sizes are listed below but straps can be ordered to any length up to 15m.
• Holed 6mm at 25mm offset centres.
• Available in Galvanised & Stainless Steel.
Key FeaturesHeavy Duty Restraint Straps
When used as a lateral restraint:
• Galvanised Steel - Use min 7No 3.75x30mm sq twist nails or equivalent fixed to timber joists/rafters.
• Stainless Steel - Use min 7No 3.75x30mm annular ring shank stainless steel nails or equivalent fixed to timber joists/rafters.
Installation guidelines
HEAV
Y DU
TY RESTRA
INT STR
APS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIMco Heavy Duty Restraint StrapsGenerally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint. Manufactured from Galvanised steel, for ultimate corrosion resistance use stainless steel.
111
Bent Light Duty Restraint Straps - Galvanised Steel
Bent Light Duty Restraint Straps - Stainless Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
300BRSL 27.5 2.4 300 100 100600BRSL 27.5 2.4 600 100 20800BRSL 27.5 2.4 800 100 201000BRSL 27.5 2.4 1000 100 201200BRSL 27.5 2.4 1200 100 20
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
1000BRSLS 27.5 2.4 1000 100 20
Flat Light Duty Restraint Straps - Stainless Steel
Flat Light Duty Restraint Straps - Galvanised Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
1000FRSLS 27.5 2.4 1000 - 20
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Bent Length(mm)
Box Quantity
1000FRSL 27.5 2.4 1000 - 20
Twisted Restraint Strap - Galvanised Steel
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Twist Length(mm)
Box Quantity
1000TRSL 27.5 2.4 1000 100 20
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Light Duty Restraint Straps
• Standard stock sizes are listed below but straps can be ordered to any length up to 15m.
• Holed 6mm at 25mm offset centres.
• Available in Galvanised or Stainless Steel.
Key Features
When used as a vertical restraint to hold down a wallplate use a minimum length of 900mm:
• Galvanised Steel - Use min 10No 3.75x30mm sq. twist nails or 6No 4mmx40mm screws (drilled and plugged) into the masonry.
• Use min 2No 3.75x30mm sq. twist nails into wall plate.
• Stainless Steel - Use min 10No 3.75x30mm annular ring shank nails stainless steel or 6No 4mmx40mm stainless steel screws (drilled and plugged) into the masonry.
• Use min 2No 3.75x30mm annular ring shank stainless steel nails into wall plate.
Installation guidelines
LIGH
T DU
TY RESTRA
INT STR
APS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Light Duty Restraint StrapGenerally used for vertical restraint such as holding down a wall plate. Manufactured from Galvanised steel, for ultimate corrosion resistance use stainless steel.
112
Angle Brackets - Galvanised Steel
Angle Brackets - Stainless Steel
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
5050AB 62 50 x 50 - - 506040AB 62 60 x 40 - - 509090AB 62 90 x 90 - - 5015090AB 62 150 x 90 - - 50150150AB 62 150 x 150 - - 50
TIMco Code
Width(mm)
Leg (mm)
Joist SizeW x D to D (mm)
Joist Bearing (mm)
Box Quantity
6040ABS 62 60 x 40 - - 509090ABS 62 90 x 90 - - 50
Leg Dimensions (mm) 50 x 50 60 x 40 90 x 90 150 x 90 150 x 150
Number of holes M6mm 2 2 2 4 3Number of holes M8mm - - 3 3 3Number of holes M10mm - - 4 6 5Number of holes M10mm slots 9 7 - - -Number of Nail holes 11 13 15 23 19
Technical Data - Galvanised Steel
Leg Dimensions (mm) 60 x 40 90 x 90
Number of holes M6mm 2 2Number of holes M8mm - 3Number of holes M10mm - 4Number of holes M10mm slots 7 -Number of Nail holes 13 15
Technical Data - Stainless Steel
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Width (mm) 47
Characteristic value (kN) 6.36Safe working load (kN) Short Term 3.18Number of Nail holes 12
Technical Data
TIMco Code
Width(mm)
Thickness (mm)
Overall Height (mm)
Box Quantity
47TC 47 1.0 150 150
Truss Clips - Pre-Galvanised Steel
• 1mm Pre-Galvanised Steel.
• Design gives superior load capabilities.
Key Features
Angle Brackets
AN
GLE B
RA
CKETS &
TRUSS CLIPS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIMco Angle Bracket A versatile and general purpose 90⁰ bracket used to strengthen timber joints. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance, for ultimate corrosion resistance use stainless steel.
TIMco Truss Clip For fixing trusses, girders and rafters to wallplate. Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance.
113
Heavy Duty Fishtailed Frame Cramps
TIMco Code Width (mm) Diameter (mm) Bag Quantity
IC Universal 80mm 250
TIMco Code
Width(mm)
Overall Length (m)
Material Box Quantity
2010FB 20 10 Pre-Galvanised Steel 0.9mm 12010FBS 20 10 Stainless Steel 0.7mm 1
Fishtailed Frame Cramps
Insulation Retaining Clips
Fixing Bands Key Features
• Multiple hole sizes to add to its versatility.
Safety Frame Cramps Safety Frame Cramps - Stainless Steel
TIMco Code
Width(mm)
Thickness (mm)
Projection Length (mm)
Length of Bend (mm)
Box Quantity
100SFCS 19 2.0 100 50 250150SFCS 19 2.0 150 50 250200SFCS 19 2.0 200 50 250
FRA
ME CR
AM
PS & FIX
ING
BA
ND
SSales: U
K +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Safety End & Fish Tail Frame Cramp Traditionally used for securing timber windows and door frames into masonry. They can also be used for restraining masonry to new and existing structures in non-structural applications and can be attached to steel work.
TIMco Fixing Band A versatile perforated pre-galvanised metal strip which can easily be cut or bent to provide a quick and reliable light weight brace suitable for suspending pipework, cables and doing general repairs.
TIMco Insulation Retaining Clip Designed For use in cavity walls with standard stainless steel ties.
114
TIMco Code
Width(mm)
Thickness (mm)
Projection Length (mm)
Length of Bend (mm)
Box Quantity
100FFC 25 2.3 100 50 100150FFC 25 2.3 150 50 100200FFC 25 2.3 200 50 100
Wall Ties - Stainless Steel
Wall Ties - Stainless Steel
TIMco Code
Width(mm)
Height (m)
Cavity Width (mm)
Bundle Quantity
225WT2 225 15 76 to 100 250250WT2 250 15 101 to 125 250
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
TIMco Code Width (mm) Thickness (mm) Overall Length (mm) Box Quantity
300ARS 62 x 62 0.7 300 25
Cavity Wall Ties - Type 2
Cavity Wall Ties - Type 4
Arris Rail Bracket - Pre-Galvanised Steel
CAV
ITY WA
LL TIES & IN
SULATIO
N RETA
ININ
G CLIPS
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIMco Cavity Wall Tie - Type 2 Tangle free design Type 2 General Purpose Tie offers a practical effective solution for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys or a maximum 15m in height. Fully tested to BS EN846-5:2013 the ties meet the requirements of BS EN 845-1:2003+A1:2008 and PD6697:20010. They will also meet the requirements of Part E of the Building Regulations for Type B in external walls.
TIMco Cavity Wall Tie - Type 4 Tangle free design Type 4 Light Duty Tie is a practical and effective solution for masonry cavity walls in box form for domestic dwellings of up to two storeys or a maximum 10m in height. Fully tested to BS EN846-5:2013 the ties meet the requirements of BS EN 845-1:2003+A1:2008 and PD6697:20010. They will also meet the requirements of Part E of the Building Regulations for a Type A in party walls of any height.
TIMco Arris Rail Bracket Ideal for installing and repairing fences with timber posts. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance.
115
TANGLE FREE
TIMco Code
Width(mm)
Height (m)
Cavity Width (mm)
Bundle Quantity
200WT4 200 10 50 to 75 250225WT4 225 10 76 to 100 250250WT4 250 10 101 to 125 250
TIMco Code
Width(mm)
Height (mm)
Overall Length (mm)
Joist Bearing (mm)
Box Quantity
WSS 41 - 1200 2400 10
Width (mm) 41
Design Sheer Strength (kN/m) 2.12*
Technical Data
Wallstarter Kit
• Grade 430 Ferretic Stainless Steel
• Full fixing instructions are provided in each pack.
• Engineered for outstanding strength and performance.
• Perforated for connecting or repairing timber
* Fixing into existing AAC block work with a compressive strength of 3.5N/mm2
Key Features
Key Features
Pre-Galvanised Steel - 1mm
Stainless Steel - 1mm
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Box Quantity
42NP 42 1.0 178 10085NP 85 1.0 178 50104NP 104 1.0 154 50169NP 169 1.0 178 50178NP 178 1.0 338 25
TIMco Code
Width(mm)
Thickness (mm)
Overall Length (mm)
Box Quantity
85NPS 85 1.0 178 50
Product Description TIMco Code Size
Square Twist Nail - Galvanised GST30 3.75 x 30
Fixing Information
Nail Plates
NA
IL PLATES & W
ALLSTA
RTER KITS
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco Wallstarter Kit Stainless steel wall starter systems designed to join new walls to existing masonry, suitable for both internal and external brick or block walls, the connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick.
TIMco Nail PlateA versatile perforated pre-galvanised plate used for connection or repairing timber.
116
1ST CUT FOR RAPID “PICK-UP”
2ND CUT TO PREVENT SPLITTING
NOW IN STOCK
RIBS UNDER HEAD
FOR IMPROVED
COUNTERSINKING DEEP RECESS
TO PREVENT
“CAM-OUT”
CLASSIC THREAD
FOR A SECURE
FIXING
52%LESS
TORQUE*
43%QUICKER *
UP TO
* Compared against standard woodscrew
C2 A4 Poster NEW STYLE.indd 1 11/07/2014 10:59:56
Posters
C
M
Y
CM
MY
CY
CMY
K
TIMco Notepad.pdf 1 11/10/2010 13:42
Pads
Point of SaleTIMco can supply a full range of point of sale material to dress your trade counter and maximise product and brand awareness.
Merchandising StandsTIMco now have a new range of merchandising stands available. Please speak to your regional account manager for further information.
Promotional MaterialTIMco can offer a complete marketing suite on certain lines, consisting of in store posters, branded counter display units to display our “specialist guides” giving detailed range information and large format PVC banners.
E-Shot campaignsTIMco send out regular marketing emails, tailored to suit the target audience of retailers and end users alike, these range from information led (introducing new products and ranges) right through to promotional campaigns offering limited time only special offers.
Screws, fixings &fasteners
Screws, fixings & fastenersThis Way
03 TIMco Opening Times Poster.indd 1
21/01/2011 14:06
Opening Signs
Floor Graphics
52% LESS
TORQUE
TWIN CUT MULTI-PURPOSE SCREW
NOW IN STOCK
RIBS UNDER HEAD
FOR IMPROVED
COUNTERSINKING DEEP RECESS
TO PREVENT
“CAM-OUT”
CLASSIC THREAD
FOR A SECURE
FIXING
1ST CUT FOR RAPID “PICK-UP” • 2ND CUT TO PREVENT SPLITTING
HARDWOOD THIN SHEET METAL
PLASTIC SOFTWOOD
CHIPBOARD MDF
RAPID INSTALLATION INTO 43%QUICKER
UP TO
C2 Banner 2000 x 600.indd 1 02/04/2014 12:18:54
Outdoor Banners
®
www.TIMco.co.uk • www.TIMco.ie
Anchor
Reduce your stock
by up to 50%
A carefully selected range of two part resins covering all fixing scenarios and technical requirements.
PE - Polyester Resin (bronze) – An economic day to day resin for well ventilated areas.
PESF - Polyester Styrene Free (silver) – Low odour day to day resin for poorly ventilated environments.
VESF - Vinylester Styrene Free (gold) – High performance, low odour resin for poorly ventilated, damp and wet environments.
ResinTwo part resin anchoring system
FIRST USE - PUMP RESIN TO WASTE UNTIL MIX IS AN EVEN COLOUR.
1. DRILLthe correct size hole for your fixing.
2. BLOWout any debris from the hole.
3. BRUSHthe hole to ensure sides are clean.
4. BLOWout any debris from the hole due to brushing.
THOROUGH HOLE CLEANING PRIOR TO INSTALLATION IS VITAL TO THE PERFORMANCE OF THE RESIN.
5. RESINPump the resin to fill 2/3 of the hole.
6. FIXINGInsert the fixing into the resin with a slow rotating motion and leave to cure.
STEPS 2-4
REPEAT x 4
EASY TO USE QUICK GUIDE
3 READY TO USE3 USES STANDARD TOOLS3 T-FLOW™ NOZZLE INCLUDED3 LOW EXTRUSION FORCE
3 LESS WASTAGE3 CLOSE EDGE AND AXIAL SPACING3 FASTER AND EASIER TO USE3 NO LEAKAGE
www.TIMco.co.uk • www.TIMco.ie
GUN410
GUN310
BLOW - OUT PUMP
HOLE CLEANING BRUSHES
MIXING NOZZLES
INTERNALLY THREADED SOCKETS
PLASTIC SLEEVES
Range of Chemical studs and Threaded bar also available. Range
NEW
A5 Multi-Fix Booklet v14.indd 1-2 08/11/2013 10:39:33
Leaflets
Pens
Dispensers
TIMco are happy to assist our retailers achieve maximum sales, with seasonal targeted direct mail, national trade press advertising and informative or promotional e-mail campaigns right through to traditional posters, banners and merchandising stands.
We can even tailor our marketing to suit your specific needs. Contact TIMco today on 01829 261111 to discuss possibilities.
All the help you need!
TIMco Generic banner APPROVED.indd 1 22/07/2010 10:19
Supplier of Screws,Fixings & Fasteners
The
No 1 Grafter
T-Shirts
ww
w.TIM
co.co.uk • ww
w.TIM
co.ieTIM
co MA
RKETIN
G SO
LUTIO
NS
Press AdvertisingAs members of two leading buying groups we regularly advertise promotions and offers in national trade press.
NEW GENERATION MULTI-MATERIAL
FASTENER
TIMco
TWIN CUT MULTI-PURPOSE SCREW
CALL NOW FOR MORE INFORMATIONUK +44 (0)1829 261111 • Ireland +353 (0)4763538
GrosvenorPark
Grosvenor Park Terrace
The Groves
Forest St
Priory Pl
Foregate St
York St
Queen St
Frodsham St
Eastgate St
St John St
Bush St
A5268
Union St
A5268
A5268
St Oswalds Way
A51
A51
A5268Vica
rs Ln
Pepper St
Grosvenor Park Rd
The Headlands
Love Street
1970 1975 1980 1985 19901971 1972 1973 1974 1976 19811977 19821978 19831979 1984 1986 1987 1988 1989 1991
500,000,000ITEMS IN STOCK.
£5,500,000
RAPID GROWTH TWICE AS NICE
INSTANT CLASSIC
In 1990 Peter GIll joined the company as
General Manager, to become Managing
Director in 1993.
1989 also saw the launch of the twin threaded woodscrew, this would form the basis of many future products and remains a best seller to this day.
1995 saw turnover almost
treble in the space of � ve
years to reach a record:
Continuous investment in stock meant that by 1994 the company had over:
With growing ranges and big ambitions in 1989 the company moved to a former World War II aerodrome just outside Nantwich.
YOU WANT IT WHEN?
In 1994, keen to build on an excellent customer service record, next day delivery was o� ered on all orders received by 4.00pm the day before.
1992 saw the launch of the Classic multi-purpose screw.
In 1992 the o� ce space was extended to accommodate an additional 10 work stations.
A51
Nantwich Rd
Calveley Hall Ln
Stoke Hall Ln
Mill Pool Ln
Green Lane
A51
Nantwich Rd
£2,100,100
All the hard work of the previous year paid of, as the company saw record
turnover in 1990:
RECOGNISED QUALITYBS5750 - The � rst of many
quality accreditations.
320,000,000 ITEMS IN STOCK.
With their new location the company invested heavily with:
STEADY PROGRESS
A MODEST START
A GROWINGRANGE
T I MIDWOOD & COThe company was founded in 1972 by a young Tim Midwood, based in a small unit at No. 1 Love Street, Chester.
In 1972 after � ve years of successful trading at the Love Street site, T I Midwood relocated to larger premises, Unit B2, Stadium Industrial Road, Chester (now known as Sealand Road).
In 1980 T I Midwood expanded their range to include drywall screws.
A WINDOW OF OPPORTUNITYIn 1987 T I Midwood applied their ever growing
industry knowledge and experience to the window screw market.
Initially the company concentrated on importing a small range of nylon lock nuts and self tapping screws from the far east.
Keen to stay ahead of the times in 1973 T I Midwood invested in their � rst real technology....
A brand new Telex machine!
From the UK to Taiwan meant
taking 4 flights over 48 hours!
Finchell Dr
Jasmond Rd
Sedge�
eld R
d
Arthur St
A548
A548
Sealand Rd
Whipcord Ln
Upper Cambrian Road
Garden Ln
Orchard St
Louise St
Raymond St
Gladstone Ave
Vernon RdCatherin
e St
S View rd
Tower Rd N
Walls Ave
Kitc
hen
St
Raym
ond St
19951992 1993 1994
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538
TIMco
YOU
R TIMco CO
NTA
CTSN
OTES
ww
w.TIM
co.co.uk • ww
w.TIM
co.ie
Here to help!
Internal Contact
Name:
Direct Line:
Email:
Notes
External Contact
Name:
Mobile:
Email:
Sales: UK +44 (0)1829 261111 • Ireland +353 (0)4763538TIMcoDedicated to serving our distributors and stockists.At TIMco we pride ourselves on delivering the highest standards of customer service. We want to look after you as best we can and develop a long lasting relationship.
We operate as a completely integrated team to provide you with the very best service. As a valued TIMco customer you are assigned a dedicated regional account manager who will visit you on a regular basis to discuss your business requirements. Furthermore we will assign an internal sales representative to you who will deal with your day-to-day needs.
Distributed by:
Issue No: 11
UK: +44 (0)1829 261111Northern Ireland: +44 (0)2890992305
Ireland: +353 (0)4763538
www.TIMco.co.ukwww.TIMco.ie
TIMco House, Green Lane, Wardle, Nantwich, CW5 6BJFax: +44 (0)1829 261102Fax: +44 (0)1829 [email protected]
T.I. Midwood & Co Ltd
Aviemore House, Hill Street, Monaghan, IrelandFax: +353 (0)4763539 [email protected]
2014
T.I.Mid
wo
od
& C
o Ltd
ww
w.TIM
co.co.uk •
ww
w.TIM
co.ieW
HO
LESALE SU
PP
LIER O
F SCR
EWS, FA
STENER
S, FIXIN
GS, N
AILS A
ND
PO
WER
TOO
L AC
CESSO
RIES
