Embed Size (px)
Citation preview
7/26/2019 TIE ROD Calculation Rev02
http://slidepdf.com/reader/full/tie-rod-calculation-rev02 1/2
TITLE CALCULATION FOR TIE-ROD IS TENSION Document # 120141200‐09‐101
FIFTH INDUSTRIAL SQUARE UPGRADING PROJECT, SHARJAH: REV. 2PS10B STORMWATER PUMPING STATION & RISING MAIN Date 15.06.16
By SVChkd RKAppd SS
CALCULATION FOR TIE‐ROD IS TENSION
FOR PIPE
DN
1800
1.80 m
2.54 m2
4.50 bar g
350.00 kN/m2
M52
0.001758 m2
4.00
222.66 kN
75.00 ksi517106.25 kN/m2
2.00
454.54 kN
FOR PIPE DN 800
0.80 m
0.50 m24.50 bar g
350.00 kN m2M36
0.000817 m22.00
87.96 kN
75.00 ksi
517106.25 kN/m2
2.00
211.24 kN
BOLT SIZE SELECTED IS SAFE SINCE TOTAL LOAD ON ONE BOLT IS LESS THAN ALLOWABLE TENSILE LOAD
Tensile Strength for SA‐276 SS316 bar
Tensile Strength for SA‐276 SS316 bar
Safety factor
ALLOWABLE TENSILE LOAD (Tensile Strength x Bolt Stress Area / Safety factor)
Internal pressureBolt size consideredBolt Stress areaNo of bolts
TOTAL LOAD ON ONE BOLT (Internal pressure x Pipe area / no of bolts)
No of bolts
Bolt Stress area
Diameter of pipe
Pipe area
Internal pressure
Bolt size considered
Internal pressure
PROJECT
CLIENT
BOLT SIZE SELECTED IS SAFE SINCE TOTAL LOAD ON ONE BOLT IS LESS THAN ALLOWABLE TENSILE LOAD
Tensile Strength for SA‐276 SS316 bar
Safety factor
ALLOWABLE TENSILE LOAD (Tensile Strength x Bolt Stress Area / Safety factor)
UNITED ARAB EMIRATESMINISTRY OF PUBLIC WORKS
Internal pressure
Pipe area
Diameter of pipe
Tensile Strength
for
SA
‐276
SS316
bar
TOTAL LOAD ON ONE BOLT (Internal pressure x Pipe area / no of bolts)
C:\Users\Sleiman.Shokr\Desktop\TIE ROD
Calculati
7/26/2019 TIE ROD Calculation Rev02
http://slidepdf.com/reader/full/tie-rod-calculation-rev02 2/2
FOR PIPE DN 600
0.60 m
0.28 m2
4.50 bar g
350.00 kN/m2
M30
0.000561 m2
2.0049.48 kN
75.00 ksi
517106.25 kN/m2
2.00
145.05 kN
Tensile Strength for SA‐276 SS316 bar
Tensile Strength for SA‐276 SS316 bar
Safety factor
ALLOWABLE TENSILE LOAD (Tensile Strength x Bolt Stress Area / Safety factor)
BOLT SIZE SELECTED IS SAFE SINCE TOTAL LOAD ON ONE BOLT IS LESS THAN ALLOWABLE TENSILE LOAD
Bolt size considered
Bolt Stress area
No of
bolts
TOTAL LOAD ON ONE BOLT (Internal pressure x Pipe area / no of bolts)
Diameter of pipe
Pipe area
Internal pressure
Internal pressure
C:\Users\Sleiman.Shokr\Desktop\TIE ROD
Calculati
