TI-84 Plus and TI-84 Plus Silver Edition

Guidebook

Note: This guidebook for the TI-84 Plus or TI-84 Plus Silver Edition with operating system (OS) version 2.55MP. If your calculator has a previous OS version, your screens may look different and some features may not be available. You can download the latest OS education.ti.com/guides.

Important Information

Texas Instruments makes no warranty, either express or implied, including but not limited to any implied warranties of merchantability and fitness for a particular purpose, regarding any programs or book materials and makes such materials available solely on an "as-is" basis. In no event shall Texas Instruments be liable to anyone for special, collateral, incidental, or consequential damages in connection with or arising out of the purchase or use of these materials, and the sole and exclusive liability of Texas Instruments, regardless of the form of action, shall not exceed the purchase price of this product. Moreover, Texas Instruments shall not be liable for any claim of any kind whatsoever against the use of these materials by any other party.

20042010 Texas Instruments Incorporated Vernier EasyData, Vernier LabPro, and Vernier Go! Motion are a trademarks of Vernier Software & Technology.ii

ContentsImportant Information .................................................................................................................... ii

Chapter 1: Operating the TI-84 Plus Silver Edition .................................................................... 1

Documentation Conventions .......................................................................................................... 1TI-84 Plus Keyboard ......................................................................................................................... 1Turning On and Turning Off the TI-84 Plus .................................................................................... 3Setting the Display Contrast ........................................................................................................... 4The Display ....................................................................................................................................... 5Interchangeable Faceplates ............................................................................................................ 8Using the Clock ................................................................................................................................ 9Entering Expressions and Instructions .......................................................................................... 11Setting Modes ................................................................................................................................ 14Using TI-84 Plus Variable Names ................................................................................................... 19Storing Variable Values ................................................................................................................. 20Recalling Variable Values .............................................................................................................. 21Scrolling Through Previous Entries on the Home Screen ............................................................ 22ENTRY (Last Entry) Storage Area .................................................................................................. 22TI-84 Plus Menus ............................................................................................................................ 25VARS and VARS Y-VARS Menus ..................................................................................................... 27Equation Operating System (EOS) ............................................................................................. 29Special Features of the TI-84 Plus ................................................................................................. 30Other TI-84 Plus Features .............................................................................................................. 31Error Conditions ............................................................................................................................. 33

Chapter 2: Math, Angle, and Test Operations ......................................................................... 35

Getting Started: Coin Flip ............................................................................................................. 35Keyboard Math Operations .......................................................................................................... 36MATH Operations .......................................................................................................................... 38Using the Equation Solver ............................................................................................................. 42MATH NUM (Number) Operations ................................................................................................ 45Entering and Using Complex Numbers ........................................................................................ 50MATH CPX (Complex) Operations ................................................................................................ 54MATH PRB (Probability) Operations ............................................................................................. 56ANGLE Operations ......................................................................................................................... 59TEST (Relational) Operations ........................................................................................................ 62TEST LOGIC (Boolean) Operations ................................................................................................ 63

Chapter 3: Function Graphing .................................................................................................. 65

Getting Started: Graphing a Circle ............................................................................................... 65Defining Graphs ............................................................................................................................. 66Setting the Graph Modes .............................................................................................................. 67Defining Functions ........................................................................................................................ 68Selecting and Deselecting Functions ............................................................................................ 69Setting Graph Styles for Functions ............................................................................................... 71Setting the Viewing Window Variables ....................................................................................... 73Setting the Graph Format ............................................................................................................. 74Displaying Graphs .......................................................................................................................... 76Exploring Graphs with the Free-Moving Cursor .......................................................................... 78Exploring Graphs with TRACE ....................................................................................................... 78Exploring Graphs with the ZOOM Instructions ............................................................................ 80Using ZOOM MEMORY .................................................................................................................. 85Using the CALC (Calculate) Operations ........................................................................................ 87iii

Chapter 4: Parametric Graphing .............................................................................................. 91

Getting Started: Path of a Ball ...................................................................................................... 91Defining and Displaying Parametric Graphs ................................................................................ 93Exploring Parametric Graphs ........................................................................................................ 95

Chapter 5: Polar Graphing ........................................................................................................ 97

Getting Started: Polar Rose ........................................................................................................... 97Defining and Displaying Polar Graphs ......................................................................................... 98Exploring Polar Graphs ................................................................................................................ 100

Chapter 6: Sequence Graphing ............................................................................................... 102

Getting Started: Forest and Trees ............................................................................................... 102Defining and Displaying Sequence Graphs ................................................................................ 103Selecting Axes Combinations ...................................................................................................... 107Exploring Sequence Graphs ........................................................................................................ 107Graphing Web Plots ..................................................................................................................... 109Using Web Plots to Illustrate Convergence ................................................................................ 110Graphing Phase Plots ................................................................................................................... 111Comparing TI-84 Plus and TI-82 Sequence Variables ................................................................. 113Keystroke Differences Between TI-84 Plus

and TI-82 ................................................................................................................................. 114

Chapter 7: Tables ..................................................................................................................... 115

Getting Started: Roots of a Function .......................................................................................... 115Setting Up the Table .................................................................................................................... 116Defining the Dependent Variables ............................................................................................. 117Displaying the Table .................................................................................................................... 118

Chapter 8: Draw Instructions ................................................................................................. 121

Getting Started: Drawing a Tangent Line .................................................................................. 121Using the DRAW Menu ............................................................................................................... 122Clearing Drawings ....................................................................................................................... 123Drawing Line Segments .............................................................................................................. 124Drawing Horizontal and Vertical Lines ...................................................................................... 125Drawing Tangent Lines ................................................................................................................ 126Drawing Functions and Inverses ................................................................................................. 127Shading Areas on a Graph .......................................................................................................... 128Drawing Circles ............................................................................................................................ 128Placing Text on a Graph .............................................................................................................. 129Using Pen to Draw on a Graph ................................................................................................... 130Drawing Points on a Graph ......................................................................................................... 131Drawing Pixels ............................................................................................................................. 132Storing Graph Pictures (Pic) ......................................................................................................... 134Recalling Graph Pictures (Pic) ...................................................................................................... 135Storing Graph Databases (GDB) .................................................................................................. 135Recalling Graph Databases (GDB) ............................................................................................... 136

Chapter 9: Split Screen ........................................................................................................... 137

Getting Started: Exploring the Unit Circle ................................................................................. 137Using Split Screen ........................................................................................................................ 138iv

Horiz (Horizontal) Split Screen .................................................................................................... 139G-T (Graph-Table) Split Screen .................................................................................................... 140TI-84 Plus Pixels in Horiz and G-T Modes .................................................................................... 141

Chapter 10: Matrices ................................................................................................................. 143

Getting Started: Using the MTRX Shortcut Menu ..................................................................... 143Getting Started: Systems of Linear Equations ............................................................................ 144Defining a Matrix ........................................................................................................................ 145Viewing and Editing Matrix Elements ........................................................................................ 146Using Matrices with Expressions ................................................................................................. 148Displaying and Copying Matrices ............................................................................................... 149Using Math Functions with Matrices .......................................................................................... 151Using the MATRX MATH Operations .......................................................................................... 154

Chapter 11: Lists ........................................................................................................................ 161

Getting Started: Generating a Sequence ................................................................................... 161Naming Lists ................................................................................................................................. 162Storing and Displaying Lists ........................................................................................................ 163Entering List Names ..................................................................................................................... 164Attaching Formulas to List Names .............................................................................................. 165Using Lists in Expressions ............................................................................................................ 167LIST OPS Menu ............................................................................................................................. 168LIST MATH Menu ......................................................................................................................... 175

Chapter 12: Statistics ................................................................................................................ 178

Getting Started: Pendulum Lengths and Periods ...................................................................... 178Setting Up Statistical Analyses .................................................................................................... 184Using the Stat List Editor ............................................................................................................. 185Attaching Formulas to List Names .............................................................................................. 188Detaching Formulas from List Names ......................................................................................... 190Switching Stat List Editor Contexts ............................................................................................. 190Stat List Editor Contexts .............................................................................................................. 192STAT EDIT Menu ........................................................................................................................... 193Regression Model Features ......................................................................................................... 195STAT CALC Menu .......................................................................................................................... 198Statistical Variables ...................................................................................................................... 206Statistical Analysis in a Program ................................................................................................. 207Statistical Plotting ........................................................................................................................ 208Statistical Plotting in a Program ................................................................................................. 212

Chapter 13: Inferential Statistics and Distributions ............................................................... 215

Getting Started: Mean Height of a Population ......................................................................... 215Inferential Stat Editors ................................................................................................................ 218STAT TESTS Menu ......................................................................................................................... 221Inferential Statistics Input Descriptions ...................................................................................... 239Test and Interval Output Variables ............................................................................................. 240Distribution Functions ................................................................................................................. 241Distribution Shading ................................................................................................................... 248

Chapter 14: Applications .......................................................................................................... 251

The Applications Menu ............................................................................................................... 251v

Getting Started: Financing a Car ................................................................................................ 252Getting Started: Computing Compound Interest ...................................................................... 253Using the TVM Solver ................................................................................................................. 253Using the Financial Functions ..................................................................................................... 254Calculating Time Value of Money (TVM) ................................................................................... 255Calculating Cash Flows ................................................................................................................ 257Calculating Amortization ............................................................................................................ 258Calculating Interest Conversion .................................................................................................. 261Finding Days between Dates/Defining Payment Method ......................................................... 261Using the TVM Variables ............................................................................................................. 262The EasyData Application ........................................................................................................ 263

Chapter 15: CATALOG, Strings, Hyperbolic Functions ............................................................ 266

Browsing the TI-84 Plus CATALOG .............................................................................................. 266Entering and Using Strings ......................................................................................................... 267Storing Strings to String Variables .............................................................................................. 268String Functions and Instructions in the CATALOG ................................................................... 269Hyperbolic Functions in the CATALOG ....................................................................................... 273

Chapter 16: Programming ........................................................................................................ 275

Getting Started: Volume of a Cylinder ....................................................................................... 275Creating and Deleting Programs ................................................................................................ 276Entering Command Lines and Executing Programs ................................................................... 278Editing Programs ......................................................................................................................... 279Copying and Renaming Programs .............................................................................................. 280PRGM CTL (Control) Instructions ................................................................................................. 281PRGM I/O (Input/Output) Instructions ........................................................................................ 288Calling Other Programs as Subroutines ...................................................................................... 293Running an Assembly Language Program ................................................................................. 294

Chapter 17: Activities ............................................................................................................... 296

The Quadratic Formula ............................................................................................................... 296Box with Lid ................................................................................................................................. 299Comparing Test Results Using Box Plots ..................................................................................... 306Graphing Piecewise Functions .................................................................................................... 308Graphing Inequalities .................................................................................................................. 309Solving a System of Nonlinear Equations ................................................................................... 310Using a Program to Create the Sierpinski Triangle .................................................................... 311Graphing Cobweb Attractors ...................................................................................................... 312Using a Program to Guess the Coefficients ................................................................................ 313Graphing the Unit Circle and Trigonometric Curves ................................................................. 315Finding the Area between Curves .............................................................................................. 316Using Parametric Equations: Ferris Wheel Problem .................................................................. 317Demonstrating the Fundamental Theorem of Calculus ............................................................ 319Computing Areas of Regular N-Sided Polygons ........................................................................ 321Computing and Graphing Mortgage Payments ........................................................................ 323

Chapter 18: Memory and Variable Management .................................................................... 326

Checking Available Memory ....................................................................................................... 326Deleting Items from Memory ..................................................................................................... 329Clearing Entries and List Elements ............................................................................................. 329Archiving and UnArchiving Variables ......................................................................................... 330vi

Resetting the TI-84 Plus ............................................................................................................... 333Grouping and Ungrouping Variables ......................................................................................... 336Garbage Collection ...................................................................................................................... 339ERR:ARCHIVE FULL Message ....................................................................................................... 343

Chapter 19: Communication Link ............................................................................................. 344

Getting Started: Sending Variables ............................................................................................ 344TI-84 Plus LINK ............................................................................................................................. 345Selecting Items to Send ............................................................................................................... 347Receiving Items ............................................................................................................................ 350Backing Up RAM Memory ........................................................................................................... 351Error Conditions ........................................................................................................................... 352

Appendix A: Functions and Instructions ................................................................................... 354

Appendix B: Reference Information ......................................................................................... 383

Variables ....................................................................................................................................... 383Statistics Formulas ....................................................................................................................... 384Financial Formulas ....................................................................................................................... 387Important Things You Need to Know About Your TI-84 Plus ................................................... 391Error Conditions ........................................................................................................................... 394Accuracy Information .................................................................................................................. 398

Appendix C: Service and Warranty Information ...................................................................... 400

Texas Instruments Support and Service ...................................................................................... 400Battery Information ..................................................................................................................... 400In Case of Difficulty ..................................................................................................................... 402vii

Chapter 1: Operating the TI-84 Plus Silver Edition

Documentation Conventions

In the body of this guidebook, TI-84 Plus refers to the TI-84 Plus Silver Edition, but all of the instructions, examples, and functions in this guidebook also work for the TI-84 Plus. The two graphing calculators differ only in available RAM memory, interchangeable faceplates, and Flash application ROM memory. Sometimes, as in Chapter 19, the full name TI-84 Plus Silver Edition is used to distinguish it from the TI-84 Plus.

Screen shots were taken using OS version 2.53MP and higher in either MathPrint or Classic mode. All features are available in both modes; however, screens make look slightly different depending on the mode setting. Many examples highlight features that are not available in previous OS versions. If your calculator does not have the latest OS, features may not be available and your screens may look different. You can download the latest OS from education.ti.com.

A new MODE menu item, STAT WIZARDS is available with OS version 2.55MP for syntax entry help for commands and functions in the STAT CALC menu, DISTR DISTR menu, DISTR DRAW menu and the seq( function (sequence) in the LIST OPS menu. When selecting a supported statistics command, regression or distribution with the STAT WIZARDS setting ON: (the default setting) a syntax help (wizard) screen is displayed. The wizard allows the entry of required and optional arguments. The function or command will paste with the entered arguments to the Home Screen history or in most other locations where the cursor is available for input. If a command or function is accessed from N the command or function will paste without wizard support. Run the Catalog Help application () for more syntax help when needed. APPS

TI-84 Plus Keyboard

Generally, the keyboard is divided into these zones: graphing keys, editing keys, advanced function keys, and scientific calculator keys.

Keyboard Zones

Graphing Graphing keys access the interactive graphing features. The third function of these keys (t ^-a) displays the shortcut menus, which include templates for fractions, n/d, quick matrix entry, and some of the functions found on the MATH and VARS menus.

Editing Editing keys allow you to edit expressions and values.

Advanced Advanced function keys display menus that access the advanced functions.

Scientific Scientific calculator keys access the capabilities of a standard scientific calculator.Chapter 1: Operating the TI-84 Plus Silver Edition 1

Graphing Keys

Editing Keys

Advanced Function Keys

Scientific Calculator Keys

TI-84 Plus Silver Edition

Using the Color.Coded Keyboard

The keys on the TI-84 Plus are color-coded to help you easily locate the key you need.

The light colored keys are the number keys. The keys along the right side of the keyboard are the common math functions. The keys across the top set up and display graphs. The key provides access to applications such as the Inequality Graphing, Transformation Graphing, Conic Graphing, Polynomial Root Finder and Simultaneous Equation Solver, and Catalog Help.

The primary function of each key is printed on the keys. For example, when you press , the MATH menu is displayed.

Using the y and KeysThe secondary function of each key is printed above the key. When you press the y key, the character, abbreviation, or word printed above the other keys becomes active for the next keystroke. For example, when you press y and then , the TEST menu is displayed. This guidebook describes this keystroke combination as y :.Many keys also have a third function. These functions are printed above the keys in the same color as the key. The third functions enter alphabetic characters and special symbols as well as access SOLVE and shortcut menus. For example, when you press and then , the letter A is entered. This guidebook describes this keystroke combination as [A]. Chapter 1: Operating the TI-84 Plus Silver Edition 2

y Accesses the second function printed above each key.

Accesses the third function printed above each key.

^ - a Access shortcut menus for functionality including templates for fractions, n/d, and other functions.

If you want to enter several alphabetic characters in a row, you can press y 7 to lock the alpha key in the On position and avoid having to press multiple times. Press a second time to unlock it.

Note: The flashing cursor changes to when you press , even if you are accessing a function or a menu.

Turning On and Turning Off the TI-84 Plus

Turning On the Graphing Calculator

To turn on the TI-84 Plus, press . An information screen displays reminding you that you can press t ^ - a to display the shortcut menus. This message also displays when you reset RAM.

f To continue but not see this information screen again, press 1.f To continue and see this information screen again the next time you turn on the TI-84 Plus,

press 2.

If you previously had turned off the graphing calculator by pressing y M, the TI-84 Plus displays the home screen as it was when you last used it and clears any error. (The information screen displays first, unless you chose not to see it again.) If the home screen is blank, press } to scroll through the history of previous calculations.

If Automatic Power Down (APD) had previously turned off the graphing calculator, the TI-84 Plus will return exactly as you left it, including the display, cursor, and any error.Chapter 1: Operating the TI-84 Plus Silver Edition 3

If the TI-84 Plus is turned off and connected to another graphing calculator or personal computer, any communication activity will wake up the TI-84 Plus.

To prolong the life of the batteries, APD turns off the TI-84 Plus automatically after about five minutes without any activity.

Turning Off the Graphing Calculator

To turn off the TI-84 Plus manually, press y M. All settings and memory contents are retained by the Constant Memory function.

Any error condition is cleared.

Batteries

The TI-84 Plus uses five batteries: four AAA alkaline batteries and one button cell backup battery. The backup battery provides auxiliary power to retain memory while you replace the AAA batteries. To replace batteries without losing any information stored in memory, follow the steps in Appendix C.

Setting the Display Contrast

Adjusting the Display Contrast

You can adjust the display contrast to suit your viewing angle and lighting conditions. As you change the contrast setting, a number from 0 (lightest) to 9 (darkest) in the top-right corner indicates the current level. You may not be able to see the number if contrast is too light or too dark.

Note: The TI-84 Plus has 40 contrast settings, so each number 0 through 9 represents four settings.

The TI-84 Plus retains the contrast setting in memory when it is turned off.

To adjust the contrast, follow these steps.

f Press y } to darken the screen one level at a time.f Press y to lighten the screen one level at a time. Note: If you adjust the contrast setting to 0, the display may become completely blank. To restore the screen, press y } until the display reappears.

When to Replace Batteries

When the batteries are low, a low-battery message is displayed when you turn on the graphing calculator.

To replace the batteries without losing any information in memory, follow the steps in Appendix C.Chapter 1: Operating the TI-84 Plus Silver Edition 4

Generally, the graphing calculator will continue to operate for one or two weeks after the low-battery message is first displayed. After this period, the TI-84 Plus will turn off automatically and the unit will not operate. Batteries must be replaced. All memory should be retained.

Note:

The operating period following the first low-battery message could be longer than two weeks if you use the graphing calculator infrequently.

Always replace batteries before attempting to install a new operating system.

The Display

Types of Displays

The TI-84 Plus displays both text and graphs. Chapter 3 describes graphs. Chapter 9 describes how the TI-84 Plus can display a horizontally or vertically split screen to show graphs and text simultaneously.

Home Screen

The home screen is the primary screen of the TI-84 Plus. On this screen, enter instructions to execute and expressions to evaluate. The answers are displayed on the same screen. Most calculations are stored in the history on the home screen. You can press } and to scroll through the history of entries on the home screen and you can paste the entries or answers to the current entry line.

Displaying Entries and Answers

When text is displayed, the TI-84 Plus screen can display a maximum of 8 lines with a maximum of 16 characters per line in Classic mode. In MathPrint mode, fewer lines and fewer characters per line may be displayed.

If all lines of the display are full, text scrolls off the top of the display.

- To view previous entries and answers, press }. - To copy a previous entry or answer and paste it to the current entry line, move the cursor

to the entry or answer you want to copy and press . Note: List and matrix outputs cannot be copied. If you try to copy and paste a list or matrix output, the cursor returns to the input line.

If an expression on the home screen, the Y= editor (Chapter 3), or the program editor (Chapter 16) is longer than one line, it wraps to the beginning of the next line in Classic mode. In MathPrint mode, an expression on the home screen or Y= editor that is longer than one line scrolls off the screen to the right. An arrow on the right side of the screen indicates that you can scroll right to see more of the expression. In numeric editors such as the window screen (Chapter 3), a long expression scrolls to the right and left in both Classic and MathPrint modes. Press y ~ to move the cursor to the end of the line. Press y | to move the cursor to the beginning of the line.Chapter 1: Operating the TI-84 Plus Silver Edition 5

EntryAnswer

t ^ Opens FRAC menu.

t _ Opens FUNC menu.

t ` Opens MTRX menu.

t a Opens YVAR menu.

When an entry is executed on the home screen, the answer is displayed on the right side of the next line.

The mode settings control the way the TI-84 Plus interprets expressions and displays answers.

If an answer, such as a list or matrix, is too long to display entirely on one line, an arrow (MathPrint) or an ellipsis (Classic) is displayed to the right or left. Press ~ and | to display the answer.

Using Shortcut Menus

Shortcut menus allow quick access to the following:

AnswerEntry

MathPrint

AnswerEntry

Classic

AnswerEntry

Answer

EntryChapter 1: Operating the TI-84 Plus Silver Edition 6

Templates to enter fractions and selected functions from the MATH MATH and MATH NUM menus as you would see them in a textbook. Functions include absolute value, summation, numeric differentiation, numeric integration, and log base n.

Matrix entry.

Names of function variables from the VARS Y-VARS menu.

Initially, the menus are hidden. To open a menu, press t plus the F-key that corresponds to the menu, that is, ^ for FRAC, _ for FUNC, ` for MTRX, or a for YVAR. To select a menu item, either press the number corresponding to the item, or use the arrow keys to move the cursor to the appropriate line and then press .All shortcut menu items except matrix templates can also be selected using standard menus. For example, you can choose the summation template from three places:

The shortcut menus are available to use where input is allowed. If the calculator is in Classic mode, or if a screen is displayed that does not support MathPrint display, entries will be displayed in Classic display. The MTRX menu is only available in MathPrint mode on the home screen and in the Y= editor.

Note: Shortcut menus may not be available if t plus F-key combinations are used by an application that is running, such as Inequality Graphing or Transformation Graphing.

Returning to the Home Screen

To return to the home screen from any other screen, press y 5.

FUNC shortcut menu

MATH MATH menu

CatalogChapter 1: Operating the TI-84 Plus Silver Edition 7

Busy Indicator

When the TI-84 Plus is calculating or graphing, a vertical moving line is displayed as a busy indicator in the top-right corner of the screen. When you pause a graph or a program, the busy indicator becomes a vertical moving dotted line.

Display Cursors

In most cases, the appearance of the cursor indicates what will happen when you press the next key or select the next menu item to be pasted as a character.

If you press during an insertion, the cursor becomes an underlined A (A). If you press y during an insertion, the underlined cursors becomes an underlined # (#).

Note: If you highlight a small character such as a colon or a comma and then press or y, the cursor does not change because the cursor width is too narrow.

Graphs and editors sometimes display additional cursors, which are described in other chapters.

Interchangeable Faceplates

The TI-84 Plus Silver Edition has interchangeable faceplates that let you customize the appearance of your unit. To purchase additional faceplates, refer to the TI Online Store at education.ti.com.

Cursor Appearance Effect of Next Keystroke

Entry Solid rectangle $ A character is entered at the cursor; any existing character is overwrittenInsert Underline

__A character is inserted in front of the cursor location

Second Reverse arrow A 2nd character is entered or a 2nd operation is executedAlpha Reverse A An alpha character is entered, SOLVE is executed, or shortcut menus are displayed.Full Checkerboard rectangle # No entry; the maximum characters are entered at a prompt or memory is fullMathPrint Right arrow The cursor moves to either the next part of the

template or out of the template.Chapter 1: Operating the TI-84 Plus Silver Edition 8

Removing a Faceplate

1. Lift the tab at the bottom edge of the faceplate away from the TI-84 Plus Silver Edition case.

2. Carefully lift the faceplate away from the unit until it releases. Be careful not to damage the faceplate or the keyboard.

Installing New Faceplates

1. Align the top of the faceplate in the corresponding grooves of the TI-84 Plus Silver Edition case.

2. Gently click the faceplate into place. Do not force.

3. Make sure you gently press each of the grooves to ensure the faceplate is installed properly. See the diagram for proper groove placement.

Using the Clock

Use the clock to set the time and date, select the clock display format, and turn the clock on and off. The clock is turned on by default and is accessed from the mode screen.

Displaying the Clock Settings

1. Press z.2. Press the to move the cursor to SET CLOCK.3. Press . Chapter 1: Operating the TI-84 Plus Silver Edition 9

Changing the Clock Settings

1. Press the ~ or | to highlight the date format you want. Press .

2. Press to highlight YEAR. Press and type the year.

3. Press to highlight MONTH. Press and type the number of the month (1-12).

4. Press to highlight DAY. Press and type the date.

5. Press to highlight TIME. Press ~ or | to highlight the time format you want. Press .

6. Press to highlight HOUR. Press and type the hour (a number from 1-12 or 0-23).

7. Press to highlight MINUTE. Press and type the minutes (a number from 0-59).

8. Press to highlight AM/PM. Press ~ or | to highlight the format. Press .

9. To save changes, press to highlight SAVE. Press .

Error Messages

Turning the Clock On

There are two options to turn the clock on. One option is through the MODE screen, the other is through the Catalog.

If you type the wrong date for the month, for example, June 31 (June does not have 31 days), you will receive an error message with two choices:

To quit the clock application and return to the home screen, select 1: Quit.

or

To return to the clock application and correct the error, select 2: Goto.Chapter 1: Operating the TI-84 Plus Silver Edition 10

Using the Mode Screen to turn the clock on

1. If the clock is turned off, Press to highlight TURN CLOCK ON.

2. Press .

Using the Catalog to turn the clock on

1. If the clock is turned off, Press y N 2. Press or } to scroll the CATALOG until the

selection cursor points to ClockOn.

3. Press .

Turning the Clock Off

1. Press y N.2. Press or } to scroll the CATALOG until the

selection cursor points to ClockOff.

3. Press .

Entering Expressions and Instructions

What Is an Expression?

An expression is a group of numbers, variables, functions and their arguments, or a combination of these elements. An expression evaluates to a single answer. On the TI-84 Plus, you enter an expression in the same order as you would write it on paper. For example, pR2 is an expression.

You can use an expression on the home screen to calculate an answer. In most places where a value is required, you can use an expression to enter a value.Chapter 1: Operating the TI-84 Plus Silver Edition 11

Entering an Expression

To create an expression, you enter numbers, variables, and functions using the keyboard and menus. An expression is completed when you press , regardless of the cursor location. The entire expression is evaluated according to Equation Operating System (EOS) rules, and the answer is displayed according to the mode setting for Answer.

Most TI-84 Plus functions and operations are symbols comprising several characters. You must enter the symbol from the keyboard or a menu; do not spell it out. For example, to calculate the log of 45, you must press 45. Do not enter the letters L, O, and G. If you enter LOG, the TI-84 Plus interprets the entry as implied multiplication of the variables L, O, and G.

Calculate 3.76 P (L7.9 + 5) + 2 log 45.

Multiple Entries on a Line

To enter two or more expressions or instructions on a line, separate them with colons ( [:]). All instructions are stored together in last entry (ENTRY).

Entering a Number in Scientific Notation

1. Enter the part of the number that precedes the exponent. This value can be an expression.

2. Press y D. is pasted to the cursor location.3. Enter the exponent, which can be one or two digits.

Note: If the exponent is negative, press , and then enter the exponent.

When you enter a number in scientific notation, the TI-84 Plus does not automatically display answers in scientific or engineering notation. The mode settings and the size of the number determine the display format.

Functions

A function returns a value. For example, , L, +, , and log( are the functions in the example on the previous page. In general, the first letter of each function is lowercase on the TI-84 Plus. Most functions take at least one argument, as indicated by an open parenthesis following the name. For example, sin( requires one argument, sin(value).

3 76 7 9 y C 5 2 45

MathPrint

ClassicChapter 1: Operating the TI-84 Plus Silver Edition 12

Note: The Catalog Help App contains syntax information for most of the functions in the catalog.

Instructions

An instruction initiates an action. For example, ClrDraw is an instruction that clears any drawn elements from a graph. Instructions cannot be used in expressions. In general, the first letter of each instruction name is uppercase. Some instructions take more than one argument, as indicated by an open parenthesis at the end of the name. For example, Circle( requires three arguments, Circle(X,Y,radius).

Interrupting a Calculation

To interrupt a calculation or graph in progress, which is indicated by the busy indicator, press .When you interrupt a calculation, a menu is displayed.

To return to the home screen, select 1:Quit.

To go to the location of the interruption, select 2:Goto.

When you interrupt a graph, a partial graph is displayed.

To return to the home screen, press or any non-graphing key. To restart graphing, press a graphing key or select a graphing instruction.

TI-84 Plus Edit Keys

Keystrokes Result

~ or | Moves the cursor within an expression; these keys repeat.} or Moves the cursor from line to line within an expression that occupies

more than one line; these keys repeat.Moves the cursor from term to term within an expression in MathPrint mode; these keys repeat.On the home screen, scrolls through the history of entries and answers.

y | Moves the cursor to the beginning of an expression.y ~ Moves the cursor to the end of an expression.y } On the home screen, moves the cursor out of a MathPrint expression.

In the Y=editor, moves the cursor from a MathPrint expression to the previous Y-var.

y In the Y=editor, moves the cursor from a MathPrint expression to the next Y-var.

Evaluates an expression or executes an instruction. On a line with text on the home screen, clears the current line.

On a blank line on the home screen, clears everything on the home screen.In an editor, clears the expression or value where the cursor is located; it does not store a zero.Chapter 1: Operating the TI-84 Plus Silver Edition 13

Setting Modes

Checking Mode Settings

Mode settings control how the TI-84 Plus displays and interprets numbers and graphs. Mode settings are retained by the Constant Memory feature when the TI-84 Plus is turned off. All numbers, including elements of matrices and lists, are displayed according to the current mode settings.

To display the mode settings, press z. The current settings are highlighted. Defaults are highlighted below. The following pages describe the mode settings in detail.

{ Deletes a character at the cursor; this key repeats.y 6 Changes the cursor to an underline (__); inserts characters in front of the

underline cursor; to end insertion, press y 6 or press |, }, ~, or .

y Changes the cursor to ; the next keystroke performs a 2nd function (displayed above a key and to the left); to cancel 2nd, press y again.

Changes the cursor to ; the next keystroke performs a third function of that key (displayed above a key and to the right), executes SOLVE (Chapters 10 and 11), or accesses a shortcut menu; to cancel , press or press |, }, ~, or .

y 7 Changes the cursor to ; sets alpha-lock; subsequent keystrokes access the third functions of the keys pressed; to cancel alpha-lock, press . If you are prompted to enter a name such as for a group or a program, alpha-lock is set automatically.

Pastes an X in Func mode, a T in Par mode, a q in Pol mode, or an n in Seq mode with one keystroke.

Normal Sci Eng Numeric notationFloat 0123456789 Number of decimal places in answersRadian Degree Unit of angle measureFunc Par Pol Seq Type of graphingConnected Dot Whether to connect graph pointsSequential Simul Whether to plot simultaneouslyReal a+bi re^qi Real, rectangular complex, or polar complexFull Horiz G-T Full screen, two split-screen modesMathPrint Classic Controls whether inputs and outputs on the home screen and in

the Y= editor are displayed as they are in textbooks

n/d Un/d Displays results as simple fractions or mixed fractionsAnswers: Auto Dec Frac Controls the format of the answers

Keystrokes ResultChapter 1: Operating the TI-84 Plus Silver Edition 14

Changing Mode Settings

To change mode settings, follow these steps.

1. Press or } to move the cursor to the line of the setting that you want to change.2. Press ~ or | to move the cursor to the setting you want.3. Press .

Setting a Mode from a Program

You can set a mode from a program by entering the name of the mode as an instruction; for example, Func or Float. From a blank program command line, select the mode setting from the mode screen; the instruction is pasted to the cursor location.

Normal, Sci, Eng

Notation modes only affect the way an answer is displayed on the home screen. Numeric answers can be displayed with up to 10 digits and a two-digit exponent and as fractions. You can enter a number in any format.

Normal notation mode is the usual way we express numbers, with digits to the left and right of the decimal, as in 12345.67.

GoTo Format Graph: No Yes Shortcut to the Format Graph screen (y .)StatDiagnostics: Off On Determines which information is displayed in a statistical

regression calculation

StatWizards: On Off Determines if syntax help prompts are provided for optional and required arguments for many statistical, regression and distribution commands and functions. On: Selection of menu items in STAT CALC, DISTR DISTR, DISTR DRAW and seq( in LIST OPS displays a screen which provides syntax help (wizard) for the entry of required and optional arguments into the command or function. The function or command will paste the entered arguments to the Home Screen history or to most other locations where the cursor is available for input. Some calculations will compute directly from the wizard. If a command or function is accessed from N the command or function will paste without wizard support. Run the Catalog Help application () for more syntax help when needed.Off: The function or command will paste to the cursor location with no syntax help (wizard).

Set Clock Sets the time and dateChapter 1: Operating the TI-84 Plus Silver Edition 15

Sci (scientific) notation mode expresses numbers in two parts. The significant digits display with one digit to the left of the decimal. The appropriate power of 10 displays to the right of , as in 1.2345674.Eng (engineering) notation mode is similar to scientific notation. However, the number can have one, two, or three digits before the decimal; and the power-of-10 exponent is a multiple of three, as in 12.345673.Note: If you select Normal notation, but the answer cannot display in 10 digits (or the absolute value is less than .001), the TI-84 Plus expresses the answer in scientific notation.

Float, 0123456789

Float (floating) decimal mode displays up to 10 digits, plus the sign and decimal.

0123456789 (fixed) decimal mode specifies the number of digits (0 through 9) to display to the right of the decimal for decimal answers.

The decimal setting applies to Normal, Sci, and Eng notation modes.

The decimal setting applies to these numbers, with respect to the Answer mode setting:

An answer displayed on the home screen

Coordinates on a graph (Chapters 3, 4, 5, and 6)

The Tangent( DRAW instruction equation of the line, x, and dy/dx values (Chapter 8)

Results of CALCULATE operations (Chapters 3, 4, 5, and 6)

The regression equation stored after the execution of a regression model (Chapter 12)

Radian, Degree

Angle modes control how the TI-84 Plus interprets angle values in trigonometric functions and polar/rectangular conversions.

Radian mode interprets angle values as radians. Answers display in radians.

Degree mode interprets angle values as degrees. Answers display in degrees.

Func, Par, Pol, Seq

Graphing modes define the graphing parameters. Chapters 3, 4, 5, and 6 describe these modes in detail.

Func (function) graphing mode plots functions, where Y is a function of X (Chapter 3).

Par (parametric) graphing mode plots relations, where X and Y are functions of T (Chapter 4).

Pol (polar) graphing mode plots functions, where r is a function of q (Chapter 5).Chapter 1: Operating the TI-84 Plus Silver Edition 16

Seq (sequence) graphing mode plots sequences (Chapter 6).

Connected, Dot

Connected plotting mode draws a line connecting each point calculated for the selected functions.

Dot plotting mode plots only the calculated points of the selected functions.

Sequential, Simul

Sequential graphing-order mode evaluates and plots one function completely before the next function is evaluated and plotted.

Simul (simultaneous) graphing-order mode evaluates and plots all selected functions for a single value of X and then evaluates and plots them for the next value of X.

Note: Regardless of which graphing mode is selected, the TI-84 Plus will sequentially graph all stat plots before it graphs any functions.

Real, a+bi, re^qi

Real mode does not display complex results unless complex numbers are entered as input.

Two complex modes display complex results.

a+bi (rectangular complex mode) displays complex numbers in the form a+bi.

re^qi (polar complex mode) displays complex numbers in the form re^qi.

Note: When you use the n/d template, both n and d must be real numbers. For example, you can

enter (the answer is displayed as a decimal value) but if you enter , a data type error

displays. To perform division with a complex number in the numerator or denominator, use regular division instead of the n/d template.

Full, Horiz, G-T

Full screen mode uses the entire screen to display a graph or edit screen.

Each split-screen mode displays two screens simultaneously.Chapter 1: Operating the TI-84 Plus Silver Edition 17

Horiz (horizontal) mode displays the current graph on the top half of the screen; it displays the home screen or an editor on the bottom half (Chapter 9).

G-T (graph-table) mode displays the current graph on the left half of the screen; it displays the table screen on the right half (Chapter 9).

MathPrint, Classic

MathPrint mode displays most inputs and outputs the way they are shown in textbooks, such as

and .

Classic mode displays expressions and answers as if written on one line, such as 1/2 + 3/4.

Note: If you switch between these modes, most entries will be preserved; however matrix calculations will not be preserved.

n/d, Un/d

n/d displays results as a simple fraction. Fractions may contain a maximum of six digits in the numerator; the value of the denominator may not exceed 9999.

Un/d displays results as a mixed number, if applicable. U, n, and d must be all be integers. If U is a non-integer, the result may be converted U n/d. If n or d is a non-integer, a syntax error is displayed. The whole number, numerator, and denominator may each contain a maximum of three digits.

Answers: Auto, Dec, Frac

Auto displays answers in a similar format as the input. For example, if a fraction is entered in an expression, the answer will be in fraction form, if possible. If a decimal appears in the expression, the output will be a decimal number.

Dec displays answers as integers or decimal numbers.

Frac displays answers as fractions, if possible.

Note: The Answers mode setting also affects how values in sequences, lists, and tables are displayed. Choose Dec or Frac to ensure that values are displayed in either decimal or fraction form. You can also convert values from decimal to fraction or fraction to decimal using the FRAC shortcut menu or the MATH menu.

GoTo Format Graph: No, Yes

No does not display the FORMAT graph screen, but can always be accessed by pressing y ..

12--- 3

4---+ x2 xd

1

2

Chapter 1: Operating the TI-84 Plus Silver Edition 18

Yes leaves the mode screen and displays the FORMAT graph screen when you press so that you can change the graph format settings. To return to the mode screen, press z.

Stat Diagnostics: Off, On

Off displays a statistical regression calculation without the correlation coefficient (r) or the coefficient of determination (r2).

On displays a statistical regression calculation with the correlation coefficient (r), and the coefficient of determination (r2), as appropriate.

Stat Wizards: On, Off

On: Selection of menu items in STAT CALC, DISTR DISTR, DISTR DRAW and seq( in LIST OPS displays a screen which provides syntax help (wizard) for the entry of required and optional arguments into the command or function. The function or command will paste the entered arguments to the Home Screen history or to most other locations where the cursor is available for input. Some calculations will compute directly from the wizard. If a command or function is accessed from N the command or function will paste without wizard support. Run the Catalog Help application () for more syntax help when needed.Off: The function or command will paste to the cursor location with no syntax help (wizard)

Set Clock

Use the clock to set the time, date, and clock display formats.

Using TI-84 Plus Variable Names

Variables and Defined Items

On the TI-84 Plus you can enter and use several types of data, including real and complex numbers, matrices, lists, functions, stat plots, graph databases, graph pictures, and strings.

The TI-84 Plus uses assigned names for variables and other items saved in memory. For lists, you also can create your own five-character names.

Variable Type Names

Real numbers (including fractions)

A, B, ... , Z, q

Complex numbers A, B, ... , Z, q

Matrices A, B, C, ... , J

Lists L1, L2, L3, L4, L5, L6, and user-defined names

Functions Y1, Y2, ... , Y9, Y0

Parametric equations X1T and Y1T, ... , X6T and Y6TChapter 1: Operating the TI-84 Plus Silver Edition 19

Notes about Variables

You can create as many list names as memory will allow (Chapter 11).

Programs have user-defined names and share memory with variables (Chapter 16).

From the home screen or from a program, you can store to matrices (Chapter 10), lists (Chapter 11), strings (Chapter 15), system variables such as Xmax (Chapter 1), TblStart (Chapter 7), and all Y= functions (Chapters 3, 4, 5, and 6).

From an editor, you can store to matrices, lists, and Y= functions (Chapter 3).

From the home screen, a program, or an editor, you can store a value to a matrix element or a list element.

You can use DRAW STO menu items to store and recall graph databases and pictures (Chapter 8).

Although most variables can be archived, system variables including r, T, X, Y, and q cannot be archived (Chapter 18)

Apps are independent applications.which are stored in Flash ROM. AppVars is a variable holder used to store variables created by independent applications. You cannot edit or change variables in AppVars unless you do so through the application which created them.

Storing Variable Values

Storing Values in a Variable

Values are stored to and recalled from memory using variable names. When an expression containing the name of a variable is evaluated, the value of the variable at that time is used.

To store a value to a variable from the home screen or a program using the key, begin on a blank line and follow these steps.

1. Enter the value you want to store. The value can be an expression.

2. Press . ! is copied to the cursor location.

Polar functions r1, r2, r3, r4, r5, r6

Sequence functions u, v, w

Stat plots Plot1, Plot2, Plot3

Graph databases GDB1, GDB2, ... , GDB9, GDB0

Graph pictures Pic1, Pic2, ... , Pic9, Pic0

Strings Str1, Str2, ... , Str9, Str0

Apps Applications

AppVars Application variables

Groups Grouped variables

System variables Xmin, Xmax, and others

Variable Type NamesChapter 1: Operating the TI-84 Plus Silver Edition 20

3. Press and then the letter of the variable to which you want to store the value.4. Press . If you entered an expression, it is evaluated. The value is stored to the variable.

Displaying a Variable Value

To display the value of a variable, enter the name on a blank line on the home screen, and then press .

Archiving Variables (Archive, Unarchive)

You can archive data, programs, or other variables in a section of memory called user data archive where they cannot be edited or deleted inadvertently. Archived variables are indicated by asterisks () to the left of the variable names. Archived variables cannot be edited or executed. They can only be seen and unarchived. For example, if you archive list L1, you will see that L1 exists in memory but if you select it and paste the name L1 to the home screen, you wont be able to see its contents or edit it until it is unarchived.

Recalling Variable Values

Using Recall (RCL)

To recall and copy variable contents to the current cursor location, follow these steps. To leave RCL, press .1. Press y K. RCL and the edit cursor are displayed on the bottom line of the screen. 2. Enter the name of the variable in one of five ways.

Press and then the letter of the variable. Press y 9, and then select the name of the list, or press y [Ln]. Press y >, and then select the name of the matrix. Press to display the VARS menu or ~ to display the VARS Y-VARS menu; then

select the type and then the name of the variable or function.

Press t a to display the YVAR shortcut menu, then select the name of the function. Press |, and then select the name of the program (in the program editor only).The variable name you selected is displayed on the bottom line and the cursor disappears.Chapter 1: Operating the TI-84 Plus Silver Edition 21

3. Press . The variable contents are inserted where the cursor was located before you began these steps.

Note: You can edit the characters pasted to the expression without affecting the value in memory.

Scrolling Through Previous Entries on the Home Screen

You can scroll up through previous entries and answers on the home screen, even if you have cleared the screen. When you find an entry or answer that you want to use, you can select it and paste it on the current entry line.

Note: List and matrix answers cannot be copied and pasted to the new entry line. However, you can copy the list or matrix command to the new entry line and execute the command again to display the answer.

f Press } or to move the cursor to the entry or answer you want to copy and then press . TThe entry or answer that you copied is automatically pasted on the current input line at the cursor location.

Note: If the cursor is in a MathPrint expression, press y } to move the cursor out of the expression and then move the cursor to the entry or answer you want to copy.

f Press u or { to delete an entry/answer pair. After an entry/answer pair has been deleted, it cannot be displayed or recalled again.

ENTRY (Last Entry) Storage Area

Using ENTRY (Last Entry)

When you press on the home screen to evaluate an expression or execute an instruction, the expression or instruction is placed in a storage area called ENTRY (last entry). When you turn off the TI-84 Plus, ENTRY is retained in memory.

To recall ENTRY, press y [. The last entry is pasted to the current cursor location, where you can edit and execute it. On the home screen or in an editor, the current line is cleared and the last entry is pasted to the line.Chapter 1: Operating the TI-84 Plus Silver Edition 22

Because the TI-84 Plus updates ENTRY only when you press , you can recall the previous entry even if you have begun to enter the next expression.

Accessing a Previous Entry

The TI-84 Plus retains as many previous entries as possible in ENTRY, up to a capacity of 128 bytes. To scroll those entries, press y [ repeatedly. If a single entry is more than 128 bytes, it is retained for ENTRY, but it cannot be placed in the ENTRY storage area.

If you press y [ after displaying the oldest stored entry, the newest stored entry is displayed again, then the next-newest entry, and so on.

Executing the Previous Entry Again

After you have pasted the last entry to the home screen and edited it (if you chose to edit it), you can execute the entry. To execute the last entry, press .To execute the displayed entry again, press again. Each subsequent execution displays the entry and the new answer.

Multiple Entry Values on a Line

To store to ENTRY two or more expressions or instructions, separate each expression or instruction with a colon, then press . All expressions and instructions separated by colons are stored in ENTRY.

5 7 y [

1 A 2 B y [

y [

0 N N 1 N :N Chapter 1: Operating the TI-84 Plus Silver Edition 23

When you press y [, all the expressions and instructions separated by colons are pasted to the current cursor location. You can edit any of the entries, and then execute all of them when you press .Example: For the equation A=pr2, use trial and error to find the radius of a circle that covers 200 square centimeters. Use 8 as your first guess.

Continue until the answer is as accurate as you want.

Clearing ENTRY

Clear Entries (Chapter 18) clears all data that the TI-84 Plus is holding in the ENTRY storage area.

Using Ans in an Expression

When an expression is evaluated successfully from the home screen or from a program, the TI-84 Plus stores the answer to a storage area called Ans (last answer). Ans may be a real or complex number, a list, a matrix, or a string. When you turn off the TI-84 Plus, the value in Ans is retained in memory.

You can use the variable Ans to represent the last answer in most places. Press y Z to copy the variable name Ans to the cursor location. When the expression is evaluated, the TI-84 Plus uses the value of Ans in the calculation.

Calculate the area of a garden plot 1.7 meters by 4.2 meters. Then calculate the yield per square meter if the plot produces a total of 147 tomatoes.

8 R : y B R y [y | 7 y 6 95

1 7 4 2 147 y Z Chapter 1: Operating the TI-84 Plus Silver Edition 24

Continuing an Expression

You can use Ans as the first entry in the next expression without entering the value again or pressing y Z. On a blank line on the home screen, enter the function. The TI-84 Plus pastes the variable name Ans to the screen, then the function.

Storing Answers

To store an answer, store Ans to a variable before you evaluate another expression.

Calculate the area of a circle of radius 5 meters. Next, calculate the volume of a cylinder of radius 5 meters and height 3.3 meters, and then store the result in the variable V.

TI-84 Plus Menus

Using a TI-84 Plus Menu

You can access most TI-84 Plus operations using menus. When you press a key or key combination to display a menu, one or more menu names appear on the top line of the screen.

The menu name on the left side of the top line is highlighted. Up to seven items in that menu are displayed, beginning with item 1, which also is highlighted.

A number or letter identifies each menu items place in the menu. The order is 1 through 9, then 0, then A, B, C, and so on. The LIST NAMES, PRGM EXEC, and PRGM EDIT menus only label items 1 through 9 and 0.

When the menu continues beyond the displayed items, a down arrow ($) replaces the colon next to the last displayed item.

When a menu item ends in an ellipsis (...), the item displays a secondary menu or editor when you select it.

When an asterisk () appears to the left of a menu item, that item is stored in user data archive (Chapter 18).

5 2 9 9

y B 5 3 3 V Chapter 1: Operating the TI-84 Plus Silver Edition 25

Displaying a Menu

Moving from One Menu to Another

Note: FRAC shortcut menu items are also found on the MATH NUM menu. FUNC shortcut menu items are also found on the MATH MATH menu.

Scrolling a Menu

To scroll down the menu items, press . To scroll up the menu items, press }.To page down six menu items at a time, press . To page up six menu items at a time, press }. To go to the last menu item directly from the first menu item, press }. To go to the first menu item directly from the last menu item, press .

While using your TI-84 Plus, you often will need to access items from its menus.

When you press a key that displays a menu, that menu temporarily replaces the screen where you are working. For example, when you press , the MATH menu is displayed as a full screen.

After you select an item from a menu, the screen where you are working usually is displayed again.

Some keys access more than one menu. When you press such a key, the names of all accessible menus are displayed on the top line. When you highlight a menu name, the items in that menu are displayed. Press ~ and | to highlight each menu name.Chapter 1: Operating the TI-84 Plus Silver Edition 26

Selecting an Item from a Menu

You can select an item from a menu in either of two ways.

Note: On the LIST NAMES, PRGM EXEC, and PRGM EDIT menus, only items 1 through 9 and 0 are labeled in such a way that you can select them by pressing the appropriate number key. To move the cursor to the first item beginning with any alpha character or q, press the key combination for that alpha character or q. If no items begin with that character, the cursor moves beyond it to the next item.

Example: Calculate 327.

Leaving a Menu without Making a Selection

You can leave a menu without making a selection in any of four ways.

Press y 5 to return to the home screen. Press to return to the previous screen. Press a key or key combination for a different menu, such as or y 9. Press a key or key combination for a different screen, such as o or y 0.

VARS and VARS Y-VARS Menus

VARS Menu

You can enter the names of functions and system variables in an expression or store to them directly.

Press the number or letter of the item you want to select. The cursor can be anywhere on the menu, and the item you select need not be displayed on the screen.

Press or } to move the cursor to the item you want, and then press .

After you select an item from a menu, the TI-84 Plus typically displays the previous screen.

27 Chapter 1: Operating the TI-84 Plus Silver Edition 27

To display the VARS menu, press . All VARS menu items display secondary menus, which show the names of the system variables. 1:Window, 2:Zoom, and 5:Statistics each access more than one secondary menu.

Selecting a Variable from the VARS Menu or VARS Y-VARS Menu

To display the VARS Y-VARS menu, press ~. 1:Function, 2:Parametric, and 3:Polar display secondary menus of the Y= function variables.

Note:

The sequence variables (u, v, w) are located on the keyboard as the second functions of , , and .

These Y= function variables are also on the YVAR shortcut menu.

To select a variable from the VARS or VARS Y-VARS menu, follow these steps.

1. Display the VARS or VARS Y-VARS menu.

Press to display the VARS menu. Press ~ to display the VARS Y-VARS menu.

2. Select the type of variable, such as 2:Zoom from the VARS menu or 3:Polar from the VARS Y-VARS menu. A secondary menu is displayed.

3. If you selected 1:Window, 2:Zoom, or 5:Statistics from the VARS menu, you can press ~ or | to display other secondary menus.

4. Select a variable name from the menu. It is pasted to the cursor location.

VARS Y-VARS1: Window... X/Y, T/q, and U/V/W variables2: Zoom... ZX/ZY, ZT/Zq, and ZU variables3: GDB... Graph database variables4: Picture... Picture variables5: Statistics... XY, G, EQ, TEST, and PTS variables6: Table... TABLE variables7: String... String variables

VARS Y-VARS1: Function... Yn functions2: Parametric... XnT, YnT functions, also found on the YVARS shortcut

menu

3: Polar... rn functions, also found on the YVARS shortcut menu4: On/Off... Lets you select/deselect functionsChapter 1: Operating the TI-84 Plus Silver Edition 28

Equation Operating System (EOS)

Order of Evaluation

The Equation Operating System (EOS) defines the order in which functions in expressions are entered and evaluated on the TI-84 Plus. EOS lets you enter numbers and functions in a simple, straightforward sequence.

EOS evaluates the functions in an expression in this order.

Note: Within a priority level, EOS evaluates functions from left to right. Calculations within parentheses are evaluated first.

Implied Multiplication

The TI-84 Plus recognizes implied multiplication, so you need not press to express multiplication in all cases. For example, the TI-84 Plus interprets 2p, 4sin(46), 5(1+2), and (25)7 as implied multiplication.

Note: TI-84 Plus implied multiplication rules, although like the TI-83, differ from those of the TI-82. For example, the TI-84 Plus evaluates 12X as (12)X, while the TI-82 evaluates 12X as 1(2X) (Chapter 2).

Parentheses

All calculations inside a pair of parentheses are completed first. For example, in the expression 4(1+2), EOS first evaluates the portion inside the parentheses, 1+2, and then multiplies the answer, 3, by 4.

Order Number Function

1 Functions that precede the argument, such as , sin(, or log(

2 Functions that are entered after the argument, such as 2, M1, !, , r, and conversions

3Powers and roots, such as 25 or

4 Permutations (nPr) and combinations (nCr)

5 Multiplication, implied multiplication, and division

6 Addition and subtraction

7 Relational functions, such as > or

8 Logic operator and

9 Logic operators or and xor

5x 32Chapter 1: Operating the TI-84 Plus Silver Edition 29

Negation

To enter a negative number, use the negation key. Press and then enter the number. On the TI-84 Plus, negation is in the third level in the EOS hierarchy. Functions in the first level, such as squaring, are evaluated before negation.

Example: MX2, evaluates to a negative number (or 0). Use parentheses to square a negative number.

Note: Use the key for subtraction and the key for negation. If you press to enter a negative number, as in 9 7, or if you press to indicate subtraction, as in 9 7, an error occurs. If you press A B, it is interpreted as implied multiplication (AMB).

Special Features of the TI-84 Plus

Flash Electronic Upgradability

The TI-84 Plus uses Flash technology, which lets you upgrade to future software versions without buying a new graphing calculator.

As new functionality becomes available, you can electronically upgrade your TI-84 Plus from the Internet. Future software versions include maintenance upgrades that will be released free of charge, as well as new applications and major software upgrades that will be available for purchase from the TI Web site: education.ti.com. For details, refer to Chapter 19.

1.5 Megabytes of Available Memory

1.5 MB of available memory are built into the TI-84 Plus Silver Edition, and 0.5 MB for the TI-84 Plus. About 24 kilobytes (K) of RAM (random access memory) are available for you to compute and store functions, programs, and data.

About 1.5 M of user data archive allow you to store data, programs, applications, or any other variables to a safe location where they cannot be edited or deleted inadvertently. You can also free up RAM by archiving variables to user data. For details, refer to Chapter 18.

Applications

Many applications are preloaded on your TI-84 Plus and others can be installed to customize the TI-84 Plus to your needs. The 1.5 MB archive space lets you store up to 94 applications at one time on the TI-84 Plus Silver Edition. Applications can also be stored on a computer for later use or linked unit-to-unit. There are 30 App slots for the TI-84 Plus. For details, refer to Chapter 18. Chapter 1: Operating the TI-84 Plus Silver Edition 30

Archiving

You can store variables in the TI-84 Plus user data archive, a protected area of memory separate from RAM. The user data archive lets you:

Store data, programs, applications or any other variables to a safe location where they cannot be edited or deleted inadvertently.

Create additional free RAM by archiving variables.

By archiving variables that do not need to be edited frequently, you can free up RAM for applications that may require additional memory. For details, refer to: Chapter 18.

Other TI-84 Plus Features

The TI-84 Plus guidebook that is included with your graphing calculator has introduced you to basic TI-84 Plus operations. This guidebook covers the other features and capabilities of the TI-84 Plus in greater detail.

Graphing

You can store, graph, and analyze up to 10 functions, up to six parametric functions, up to six polar functions, and up to three sequences. You can use DRAW instructions to annotate graphs.

The graphing chapters appear in this order: Function, Parametric, Polar, Sequence, and DRAW. For graphing details, refer to Chapters 3, 4, 5, 6, 8.

Sequences

You can generate sequences and graph them over time. Or, you can graph them as web plots or as phase plots. For details, refer to Chapter 6.

Tables

You can create function evaluation tables to analyze many functions simultaneously. For details, refer to Chapter 7.

Split Screen

You can split the screen horizontally to display both a graph and a related editor (such as the Y= editor), the table, the stat list editor, or the home screen. Also, you can split the screen vertically to display a graph and its table simultaneously. For details, refer to Chapter 9.

Matrices

You can enter and save up to 10 matrices and perform standard matrix operations on them. For details, refer to Chapter 10.Chapter 1: Operating the TI-84 Plus Silver Edition 31

Lists

You can enter and save as many lists as memory allows for use in statistical analyses. You can attach formulas to lists for automatic computation. You can use lists to evaluate expressions at multiple values simultaneously and to graph a family of curves. For details, refer to:Chapter 11.

Statistics

You can perform one- and two-variable, list-based statistical analyses, including logistic and sine regression analysis. You can plot the data as a histogram, xyLine, scatter plot, modified or regular box-and-whisker plot, or normal probability plot. You can define and store up to three stat plot definitions. For details, refer to Chapter 12.

Inferential Statistics

You can perform 16 hypothesis tests and confidence intervals and 15 distribution functions. You can display hypothesis test results graphically or numerically. For details, refer to Chapter 13.

Applications

Press to see the complete list of applications that came with your graphing calculator.Visit education.ti.com/guides for additional Flash application guidebooks. For details, refer to Chapter 14.

CATALOG

The CATALOG is a convenient, alphabetical list of all functions and instructions on the TI-84 Plus. You can paste any function or instruction from the CATALOG to the current cursor location. For details, refer to Chapter 15.

Programming

You can enter and store programs that include extensive control and input/output instructions. For details, refer to Chapter 16.Chapter 1: Operating the TI-84 Plus Silver Edition 32

Archiving

Archiving allows you to store data, programs, or other variables to user data archive where they cannot be edited or deleted inadvertently. Archiving also allows you to free up RAM for variables that may require additional memory.

For details, refer to Chapter 16.

Communication Link

The TI-84 Plus has a USB port using a USB unit-to-unit cable to connect and communicate with another TI-84 Plus or TI-84 Plus Silver Edition. The TI-84 Plus also has an I/O port using an I/O unit-to-unit cable to communicate with a TI-84 Plus Silver Edition, a TI-84 Plus, a TI-83 Plus Silver Edition, a TI-83 Plus, a TI-83, a TI-82, a TI-73, CBL 2, or a CBR System.

With TI Connect software and a USB computer cable, you can also link the TI-84 Plus to a personal computer.

As future software upgrades become available on the TI Web site, you can download the software to your PC and then use the TI Connect software and a USB computer cable to upgrade your TI-84 Plus.

For details, refer to: Chapter 19

Error Conditions

Diagnosing an Error

The TI-84 Plus detects errors while performing these tasks.

Evaluating an expression

Executing an instruction

Plotting a graph

Storing a value

When the TI-84 Plus detects an error, it returns an error message as a menu title, such as ERR:SYNTAX or ERR:DOMAIN. Appendix B describes each error type and possible reasons for the error.

Archived variables are indicated by asterisks () to the left of the variable names.Chapter 1: Operating the TI-84 Plus Silver Edition 33

If you select 1:Quit (or press y 5 or ), then the home screen is displayed. If you select 2:Goto, then the previous screen is displayed with the cursor at or near the error

location.

Note: If a syntax error occurs in the contents of a Y= function during program execution, then the Goto option returns to the Y= editor, not to the program.

Correcting an Error

To correct an error, follow these steps.

1. Note the error type (ERR:error type).2. Select 2:Goto, if it is available. The previous screen is displayed with the cursor at or near the

error location.

3. Determine the error. If you cannot recognize the error, refer to Appendix B.

4. Correct the expression.Chapter 1: Operating the TI-84 Plus Silver Edition 34

Chapter 2: Math, Angle, and Test Operations

Getting Started: Coin Flip

Getting Started is a fast-paced introduction. Read the chapter for details. For more probability simulations, try the Probability Simulations App for the TI-84 Plus. You can download this App from education.ti.com.

Suppose you want to model flipping a fair coin 10 times. You want to track how many of those 10 coin flips result in heads. You want to perform this simulation 40 times. With a fair coin, the probability of a coin flip resulting in heads is 0.5 and the probability of a coin flip resulting in tails is 0.5.

1. Begin on the home screen. Press | to display the MATH PRB menu. Press 7 to select 7:randBin( (random Binomial). randBin( is pasted to the home screen. Press 10 to enter the number of coin flips. Press . Press 5 to enter the probability of heads. Press . Press 40 to enter the number of simulations. Press .

2. Press to evaluate the expression. A list of 40 elements is generated with the first 7 displayed. The list contains the count of heads resulting from each set of 10 coin flips. The list has 40 elements because this simulation w