P47

Shenzhen NICESKY Model Co., Ltd.

THUNDERBOLT

【P47】

P47

* Featured 4 blade propeller to enhance scale realism.* Combination of static model and dynamic airplane.* Scale and vivid details are recreated with panel lines, machine guns and air intake.* Easy to assemble and excellent dynamic performance.* Almost fully pre-assembled with finished color scheme.* Hard surface of the lightweight fuselage design realized its dynamic flight performance.

Length:618mm

Wing span: 680mm

Flying weigth: 280g

Motor:2000KV brushless motor

ESC:12A

Transmitter:4CH

Receiver:micro 4CH

Servo:9g X 2 . 4.3g X 2

Battery: 7.4V 650~850MAH 15-20C LI-PO

THUNDERBOLT

【P47】

6.Do not attempt to catch plane while flying. please do not touch the propeller.

THUNDERBOLT

【P47】

P47

43mm

1.

Please connect the fuselage and the main wing as the picture below. Then using the screw to fix the bottom of the

main wing.

1

2

3

2

31

Man wing

Fuselage

Accessory

The CG is located in the back away from the leading edge of the main wing for 43mm.

Instruction of Assembly for the plane.

THUNDERBOLT

【P47】

2 Please install the electronics and adjust well. Close the canopy. The installation is finished till now.

Advice:the best adjustment angle for first flying!Aileron: minus 6 degree to 6 degreeRudder: minus 8 degree to 8 degreeElevator: minus 10 degree to 10 degree

THUNDERBOLT

【P47】 THUNDERBOLT

【P47】

itit

THUNDERBOLT

Shenzhen NICESKY Model Co., Ltd. www.nicesky.net