3
Throwin’ Caution Masking Tape Throwin’ Caution n graphic exactly where you want it on surface using tape, make sur dle section securely 1. 2. small pieces of tape holding one side, leaving the middle tape sec ransfer tape (opaque) and lettering from backing, cutting the backi knife, or razor blade, while assistant holds lettering away from su Cut backing here, leave transfer tape i Backing

Throwin’ Caution Masking Tape Throwin’ Caution Position graphic exactly where you want it on surface using tape, make sure to tape The middle section securely

Embed Size (px)

Citation preview

Page 1: Throwin’ Caution Masking Tape Throwin’ Caution Position graphic exactly where you want it on surface using tape, make sure to tape The middle section securely

Throwin’ Caution

Masking Tape

Throwin’ Caution

Position graphic exactly where you want it on surface using tape, make sure to tapeThe middle section securely

1.

2.

Remove small pieces of tape holding one side, leaving the middle tape secure, peel transfer tape (opaque) and lettering from backing, cutting the backing with sharp knife, or razor blade, while assistant holds lettering away from surface

Cut backing here, leave transfer tape intact

Backing

Page 2: Throwin’ Caution Masking Tape Throwin’ Caution Position graphic exactly where you want it on surface using tape, make sure to tape The middle section securely

Throwin’ Caution

Press down firmly

Throwin’ Caution

Starting in the middle using your hand, or a squegee press the lettering againstThe surface, working left to right, leave the transfer tape on lettering for now

3.

4.

Remove small pieces of tape holding the other side, leaving the middle tape secure, peel transfer tape (opaque) and lettering from backing, pull out remaining backing, while assistant holds lettering away from surface

Page 3: Throwin’ Caution Masking Tape Throwin’ Caution Position graphic exactly where you want it on surface using tape, make sure to tape The middle section securely

Throwin’ Caution

Press down firmly

Throwin’ Caution

Starting in the middle using your hand, or a squegee press the lettering againstThe surface, working right to left, press down firmly with plastic object

5.

6.

Carefully remove transfer tape, watch so that lettering does not pull off as well,Press down firmly again with squegee. Depending on temp and surface conditionsYou are complete!