THREAD DATA - pneuforce.com · seal but are often used to attach to female BSPP threads. BSPT ... 3/8 and 1/2 male threads into the following female thread forms. NPT, NPSF, BSPP(G),

National Pipe Taper (NPT)

British Standard Pipe Taper (BSPT) British Standard Pipe Parallel (BSPP)

National Pipe Straight (NPS)

See More Products, Check Pricing & Inventory Online

Page 2

THREAD DATA

In the pneumatics industry there are four main types of thread forms in use today. This page highlights the technical data of each which should be understood when applying the push to connect fi ttings shown in this catalogue to applications found in the fi eld.

Referred to as NPT, this American pipe thread is by far the most common thread type used on machinery manufactured and used in North America. This tapered thread seals using a thread sealant or tape. The Pneuforce BSPT male threaded fi ttings have a pre-coated thread sealant which off ers speed of connection to female threaded ports as additonal thread sealing tape is not required.

Often referred to as an “R” thread, the BSPT Thread is the standard for pipe thread across the world except for countries in North America which use NPT. BSPT is a tapered thread and is used in male threaded components for connection to female BSPT and BSPP thread forms. Using a BSPT male with BSPT female threads is the preferred method which off ers a full tapered seal but are often used to attach to female BSPP threads. BSPT threads require a thread sealant to seal. The Pneuforce BSPT male threaded fi ttings have a pre-coated thread sealant which off ers speed of connection to female threaded ports as additonal thread sealing tape is not required.

The NPS thread has the same fundamental characteristics as NPT except that it is a parallel thread. NPSF (National Pipe Straight Fuel) is used for female threads in fuel line connections but in the pneumatics industry it is often used in component bodies made of plastic where a tapered thread could split the component body as the fi tting is tightened.

Often referred to as a “G “ thread, the BSPP thread form is by far the most popular female thread for pneumatic components except in North America where NPT is the standard. A parallel thread, the male fi ttings seal with an O ring ensuring an air tight seal and with multiple connections such as a manifold, this sealing method ensures a common fi tting height. A further advantage is that the male fi tting can be used repeatedly without the need for reapplying thread sealant. Male G threads cannot be connected to female BSPT thread ports.

Thread Taper AngleThread Angle

Thread Crest & Root


Thread Crest & Root


Thread Crest & Root


Thread Crest & Root

1° 47’60°Flat

0° 60°Flat

1° 47’55°Radius

0° 55°Radius

1/8NPT 1/4NPT 3/8NPT 1/2NPT

TPI 27 18 18 14

Major Ø (mm) 10.3 13.7 17.1 21.3

Pitch (mm) 0.94 1.41 1.41 1.81

1/8BSP 1/4BSP 3/8BSP 1/2BSP

TPI 28 19 19 14

Major Ø (mm) 9.7 13.2 16.6 20.9

Pitch (mm) 0.91 1.34 1.34 1.81


Page 3

PART NUMBERNOMENCLATURE

JSCJSUB CCFD E EGG GJH HFIGIJL LFLGJLHLJLLM MFOCPU V W WJX Y YJZA

90° Flow ControlInline Flow ControlBranch TeeStraight Male StudFemale ConnectorRun TeeUnion TeeReducing Tee UnionReducing Straight UnionPlug in ReducerUniversal ElbowUniversal Female ElbowReducing NippleNippleMale ElbowFemale ElbowPlug In Reducing ElbowMale 45º ElbowPlug In ElbowExtended Male ElbowBulkhead UnionFemale BulkheadMale Round ConnectorPlugStraight UnionUnion ElbowReducing Union YPlug In Reducing ElbowBranch YUnion YPlug In YUnion Cross

CB P N11/4

1/83/165/321/4

5/163/81/2

4mm6mm8mm

10mm12mm16mm

UM5N1N2N3N4

U01U02U03U04G01G02G03G0401020304

SCTUBE SIZE

10-32UNF (M5)*M5

1/8NPT1/4NPT3/8NPT1/2NPT

1/8 Universal1/4 Universal3/8 Universal1/2 Universal

1/8BSPP1/4BSPP3/8BSPP1/2BSPP1/8BSPT1/4BSPT3/8BSPT1/2BSPT

THREAD SIZE

-

*10-32UNF Male fi ts an M5 Female thread

Bras

s Th

read

s +

Bod

y an

d C

olle

t

Bra

ss T

hrea

ds +

Pla

stic

Bod

y an

d C

olle

t

It should be noted that 5/32” is the same diameter as 4mm and 5/16” is the same diameter as 8mm tubing.

NPT FITTINGS


Page 4

FITTINGS SPECIFICATIONS

One touch “push in” fi ttings are used to connect pneumatic tubing, such as polyurethane and nylon, to various control valves, cylinders and other associated equipment. The Pneuforce fi tting allows tubing to be connected and reconnected repeatedly without damaging the tube or fi tting. All fi ttings threads are nickel plated brass. NPT and BSPT tapered threads have a pre-coated thread sealant applied for speed and consistency of assembly.

Universal Tri Thread fi ttings and M3, M5, M6 and 10-32UNF are parallel threads and therefore utilize an NBR O Ring seal.

• Fluid Medium Air • Working Pressure 0-150 psi(g) / 10bar(g)• Proof Pressure 450psi(g) / 30bar(g)• Vacuum Duty 29.5”Hg / 14mbar(a)• Working Temperature 32-140ºF / 0-60ºC (high temperature models available upon request)

All Metal Fittings -40-248ºF / -40-120ºC (pg.13)

The Pneuforce NPT fi ttings are suitable for connection of inch size tubing to NPT threads.

TUBE SIZES1/8”

5/32”3/16”1/4”

5/16”3/8”1/2”

THREAD SIZES10-32UNF

1/8”1/4”3/8”1/2”

It should also be noted that 10-32UNF is the same thread form as the metric M5 model.


TRI THREAD FITTINGS


Page 5

FITTINGS SPECIFICATIONS

The Pneuforce TRI THREAD fi ttings (designated by -U) have been developed to connect with global fl uid power products. With factories across the world using a mix of NPT (American Standard) and BSP threads, there is some confusion as to what male threads should be used or stocked by fl uid power users. Therefore the universal thread form of the TRI THREAD series has been developed to enable the connection of 1/8, 1/4, 3/8 and 1/2 male threads into the following female thread forms.

NPT, NPSF, BSPP(G), BSPT(R)

Due to the design of this thread form, the time taken to install the Tri Thread fi tting is dramatically decreased. The following procedure should be used when installing TRI THREAD fi ttings. By hand, screw the TRI THREAD fi tting into the female thread until the O ring seal compresses against the face of the component and the metal shoulder of the fi tting makes contact with the component surface. Using a suitably sized wrench, or hex key on straight fi ttings, continue to tighten the fi tting by turning clockwise by a further 1/4 turn. Do not over tighten, as once the O ring is pressed against the mating surface, the seal is airtight. Unlike a tapered thread, the seal is made via an O ring seal which is captive in the TRI THREAD. It is not an interference fi t like that of male and female tapered threads. The TRI THREAD will seal repeatedly and therefore can be used again and again.

INCH TUBE SIZES1/8”5/32”3/16”1/4”5/16”3/8”1/2”

METRIC TUBE SIZES4mm (5/32”)

6mm8mm (5/16”)

10mm12mm


Part NumberPC1/8-UPC1/8-N1PC5/32-UPC5/32-N1PC5/32-N2PC3/16-UPC3/16-N1PC3/16-N2PC3/16-N3PC1/4-UPC1/4-N1PC1/4-N2PC1/4-N3PC5/16-N1PC5/16-N2PC5/16-N3PC3/8-N1PC3/8-N2PC3/8-N3PC3/8-N4PC1/2-N2PC1/2-N3PC1/2-N4

Part NumberPL1/8-UPL1/8-N1PL5/32-UPL5/32-N1PL5/32-N2PL3/16-UPL3/16-N1PL3/16-N2PL3/16-N3PL1/4-UPL1/4-N1PL1/4-N2PL1/4-N3PL5/16-N1PL5/16-N2PL5/16-N3PL3/8-N1PL3/8-N2PL3/8-N3PL3/8-N4PL1/2-N2PL1/2-N3PL1/2-N4

Part NumberPLL1/8-UPLL1/8-N1PLL5/32-UPLL5/32-N1PLL3/16-N1PLL3/16-N2PLL3/16-N3PLL1/4-N1PLL1/4-N2PLL1/4-N3PLL5/16-N1PLL5/16-N2PLL5/16-N3PLL3/8-N2PLL3/8-N3PLL3/8-N4PLL1/2-N2PLL1/2-N3PLL1/2-N4

Part NumberPLH1/8-UPLH1/8-N1PLH5/32-UPLH5/32-N1PLH5/32-N2PLH3/16-UPLH3/16-N1PLH3/16-N2PLH3/16-N3PLH1/4-UPLH1/4-N1PLH1/4-N2PLH1/4-N3PLH5/16-N1PLH5/16-N2PLH5/16-N3PLH3/8-N1PLH3/8-N2PLH3/8-N3PLH3/8-N4PLH1/2-N2PLH1/2-N3PLH1/2-N4

Part NumberPOC1/8-UPOC1/8-N1POC5/32-UPOC5/32-N1POC1/4-UPOC1/4-N1POC1/4-N2POC5/16-N1POC5/16-N2POC5/16-N3POC3/8-N3POC3/8-N4POC1/2-N3POC1/2-N4

Part NumberPCF1/8-UPCF1/8-N1PCF5/32-N1PCF5/32-N2PCF3/16-N1PCF3/16-N2PCF1/4-N1PCF1/4-N2PCF5/16-N1PCF5/16-N2PCF5/16-N3PCF3/8-N2PCF3/8-N3PCF1/2-N2PCF1/2-N3

PC MALE STRAIGHT

PL MALE ELBOW PLH 45O ELBOW

POC ROUND STRAIGHT PCF FEMALE STRAIGHT

PLL EXTENDED ELBOW


Page 6

For Technical Details Including Dimensions Visit www.pneuforce.com

For 4mm and 8mm tube use 5/32 & 5/16 sizes respectively

NPT THREAD FITTINGS

Part NumberPLF1/8-UPLF5/32-N1PLF3/16-N1PLF3/16-N2PLF1/4-N1PLF1/4-N2PLF5/16-N1PLF5/16-N2PLF5/16-N3PLF3/8-N2PLF3/8-N3PLF1/2-N3PLF1/2-N4

Part NumberPB1/8-UPB1/8-N1PB5/32-UPB5/32-N1PB5/32-N2PB3/16-UPB3/16-N1PB3/16-N2PB3/16-N3PB1/4-UPB1/4-N1PB1/4-N2PB1/4-N3PB5/16-N1PB5/16-N2PB5/16-N3PB3/8-N1PB3/8-N2PB3/8-N3PB3/8-N4PB1/2-N2PB1/2-N3PB1/2-N4

Part NumberPD1/8-UPD1/8-N1PD5/32-UPD5/32-N1PD5/32-N2PD3/16-UPD3/16-N1PD3/16-N2PD3/16-N3PD1/4-UPD1/4-N1PD1/4-N2PD1/4-N3PD5/16-N1PD5/16-N2PD5/16-N3PD3/8-N1PD3/8-N2PD3/8-N3PD3/8-N4PD1/2-N2PD1/2-N3PD1/2-N4

Part NumberPX1/8-UPX1/8-N1PX5/32-UPX5/32-N1PX5/32-N2PX3/16-UPX3/16-N1PX3/16-N2PX3/16-N3PX1/4-UPX1/4-N1PX1/4-N2PX1/4-N3PX5/16-N1PX5/16-N2PX5/16-N3PX3/8-N1PX3/8-N2PX3/8-N3PX3/8-N4PX1/2-N2PX1/2-N3PX1/2-N4

Part NumberPH1/8-UPH1/8-N1PH5/32-UPH5/32-N1PH3/16-UPH3/16-N1PH3/16-N2PH1/4-N1PH1/4-N2PH5/16-N1PH5/16-N2PH5/16-N3PH3/8-N2PH3/8-N3PH1/2-N3PH1/2-N4

Part NumberPMF5/32-N1PMF3/16-N2PMF1/4-N1PMF1/4-N2PMF5/16-N1PMF5/16-N2PMF5/16-N3PMF3/8-N2PMF3/8-N3PMF1/2-N3PMF1/2-N4

Part NumberPHF1/8-UPHF1/8-N1PHF5/32-UPHF5/32-N1PHF3/16-UPHF3/16-N1PHF3/16-N2PHF1/4-N1PHF1/4-N2PHF5/16-N1PHF5/16-N2PHF5/16-N3PHF3/8-N2PHF3/8-N3PHF1/2-N3PHF1/2-N4

Part NumberPKD3/16-5/32-N1PKD1/4-5/32-N1PKD5/16-1/4-N2PKD5/16-3/16-N2PKD5/16-5/32-N2PKD3/8-5/16-N3

PLF FEMALE ELBOW

PX BRANCH Y

PB BRANCH TEE

PH MALE ELBOW

PMF BULKHEAD

PD RUN TEE

PHF FEMALE ELBOW

PKD MANIFOLD


Page 7



NPT THREAD FITTINGS

PL MALE ELBOWPart NumberPC1/8-UPC1/8-U01PC5/32-UPC5/32-U01PC5/32-U02PC1/4-UPC1/4-U01PC1/4-U02PC1/4-U03PC5/16-U01PC5/16-U02PC5/16-U03PC3/8-U01PC3/8-U02PC3/8-U03PC3/8-U04PC1/2-U02PC1/2-U03PC1/2-U04PC06-M5PC06-U01PC06-U02PC06-U03PC10-U01PC10-U02PC10-U03PC10-U04PC12-U02PC12-U03PC12-U04

Part NumberPB1/8-UPB1/8-U01PB5/32-UPB5/32-U01PB5/32-U02PB1/4-UPB1/4-U01PB1/4-U02PB1/4-U03PB5/16-U01PB5/16-U02PB5/16-U03PB3/8-U01PB3/8-U02PB3/8-U03PB3/8-U04PB1/2-U02PB1/2-U03PB1/2-U04PB06-M5PB06-U01PB06-U02PB06-U03PB10-U01PB10-U02PB10-U03PB10-U04PB12-U02PB12-U03PB12-U04

Part NumberPD1/8-UPD1/8-U01PD5/32-UPD5/32-U01PD5/32-U02PD1/4-UPD1/4-U01PD1/4-U02PD1/4-U03PD5/16-U01PD5/16-U02PD5/16-U03PD3/8-U01PD3/8-U02PD3/8-U03PD3/8-U04PD1/2-U02PD1/2-U03PD1/2-U04PD06-M5PD06-U01PD06-U02PD06-U03PD10-U01PD10-U02PD10-U03PD10-U04PD12-U02PD12-U03PD12-U04

Part NumberPX1/8-UPX1/8-U01PX5/32-UPX5/32-U01PX5/32-U02PX1/4-UPX1/4-U01PX1/4-U02PX1/4-U03PX5/16-U01PX5/16-U02PX5/16-U03PX3/8-U01PX3/8-U02PX3/8-U03PX3/8-U04PX1/2-U02PX1/2-U03PX1/2-U04PX06-M5PX06-U01PX06-U02PX06-U03PX10-U01PX10-U02PX10-U03PX10-U04PX12-U02PX12-U03PX12-U04

Part NumberPL1/8-UPL1/8-U01PL5/32-UPL5/32-U01PL5/32-U02PL1/4-UPL1/4-U01PL1/4-U02PL1/4-U03PL5/16-U01PL5/16-U02PL5/16-U03PL3/8-U01PL3/8-U02PL3/8-U03PL3/8-U04PL1/2-U02PL1/2-U03PL1/2-U04PL06-M5PL06-U01PL06-U02PL06-U03PL10-U01PL10-U02PL10-U03PL10-U04PL12-U02PL12-U03PL12-U04

Part NumberPLL1/8-UPLL1/8-U01PLL5/32-UPLL5/32-U01PLL5/32-U02PLL1/4-UPLL1/4-U01PLL1/4-U02PLL1/4-U03PLL5/16-U01PLL5/16-U02PLL5/16-U03PLL3/8-U01PLL3/8-U02PLL3/8-U03PLL3/8-U04PLL1/2-U02PLL1/2-U03PLL1/2-U04PLL06-M5PLL06-U01PLL06-U02PLL06-U03PLL10-U01PLL10-U02PLL10-U03PLL10-U04PLL12-U02PLL12-U03PLL12-U04

PC MALE STUDP t N b

PLL EXTENDED ELBOW

PB BRANCH TEE PD RUN TEE PX BRANCH Y


Page 8

For Technical Details Including Dimensions Visit www.pneuforce.comFor 4mm and 8mm tube use 5/32 & 5/16 sizes respectively

UNIVERSAL THREAD FITTINGS

Part NumberPOC04-M5POC04-M6POC04-01POC04-02POC06-M5POC06-M6POC06-01POC06-02POC06-03POC08-01POC08-02POC08-03POC08-04POC10-01POC10-02POC10-03POC10-04POC12-02POC12-03POC12-04

Part NumberPCF04-G01PCF04-G02PCF06-G01PCF06-G02PCF06-G03PCF08-G01PCF08-G02PCF08-G03PCF08-G04PCF10-G01PCF10-G02PCF10-G03PCF10-G04PCF12-G02PCF12-G03PCF12-G04

Part NumberPH04-M5PH04-G01PH06-M5PH06-G01PH06-G02PH08-G01PH08-G02PH08-G03PH10-G02PH10-G03PH12-G03PH12-G04

Part NumberPHF04-M5PHF04-G01PHF06-M5PHF06-G01PHF06-G02PHF08-G01PHF08-G02PHF08-G03PHF10-G02PHF10-G03PHF12-G03PHF12-G04

Part NumberPLH04-M5PLH04-G01PLH04-G02PLH06-M5PLH06-G01PLH06-G02PLH06-G03PLH06-G04PLH08-G01PLH08-G02PLH08-G03PLH08-G04PLH10-G01PLH10-G02PLH10-G03PLH10-G04PLH12-G02PLH12-G03PLH12-G04

Part NumberPKD06-04-G01PKD08-04-G02PKD08-06-G02PKD10-08-G03

Part NumberPLF04-M5PLF04-M6PLF04-G01PLF04-G02PLF06-M5PLF06-M6PLF06-G01PLF06-G02PLF06-G03PLF08-G01PLF08-G02PLF08-G03PLF08-G04PLF10-G01PLF10-G02PLF10-G03PLF10-G04PLF12-G02PLF12-G03PLF12-G04

Part NumberPMF04-G01PMF04-G02PMF06-G01PMF06-G02PMF06-G03PMF08-G01PMF08-G02PMF08-G03PMF08-G04PMF10-G01PMF10-G02PMF10-G03PMF10-G04PMF12-G02PMF12-G03PMF12-G04

P t N b P t N b P N b

POC ROUND STRAIGHT

PH MALE ELBOW

PCF FEMALE STRAIGHT

PHF FEMALE ELBOW

PMF BULKHEAD

PLF FEMALE ELBOW

PLH 45O ELBOW PKD MANIFOLD


Page 9


BSPP(G) & BSPT(R) FITTINGS

Part NumberPM1/8PM5/32PM3/16PM1/4PM5/16PM3/8PM1/2

PM04 use PM5/32PM06PM08 use PM5/16PM10PM12

Part NumberPU1/8PU5/32PU3/16PU1/4PU5/16PU3/8PU1/2

PU04 use PU5/32PU06PU08 use PU5/16PU10PU12PU16

Part NumberPV1/8PV5/32PV3/16PV1/4PV5/16PV3/8PV1/2

PV04 use PV5/32PV06PV08 use PV5/16PV10PV12PV16

Part NumberPY1/8PY5/32PY3/16PY1/4PY5/16PY3/8PY1/2

PY04 use PY5/32PY06PY08 use PY5/16PY10PY12PY16

Part NumberPE1/8PE5/32PE3/16PE1/4PE5/16PE3/8PE1/2

PE04 use PE5/32PE06PE08 use PE5/16PE10PE12PE16

Part NumberPEG1/4-1/8PEG1/4-5/32PEG5/16-5/32PEG5/16-1/4PEG3/8-5/16PEG1/2-3/8

PEG06-04PE08-04 use PEG5/16-5/32PEG08-06PEG10-08PEG12-10

Part NumberPG5/32-1/8PG3/16-5/32PG1/4-5/32PG1/4-3/16PG5/16-1/4PG3/8-5/16PG1/2-3/8

PG06-04PG08-06PG10-08PG12-10PG16-12

Part NumberPW5/32-1/8PW3/16-5/32PW1/4-5/32PW1/4-3/16PW5/16-1/4PW3/8-1/4PW3/8-5/16PW1/2-3/8

PW06-04PW08-06PW10-08PW12-10

Part NumberPZA1/8PZA5/32PZA3/16PZA1/4PZA5/16PZA3/8PZA1/2

PZA04 use PZA5/32PZA06PZA08 use PZA5/16PZA10PZA12PZA16

PM BULKHEAD

PE UNION TEE

PEG REDUCING TEE

PU UNION STRAIGHT

PY UNION Y

PW REDUCING Y

PV UNION ELBOW

PG REDUCING UNION

PZA UNION CROSS


Page 10



INCH & MM TUBE FITTINGS

The PLGJ Stem is the Larger Size

The PGJ Male Stem is the Larger Size

The PIJ Hollow Nipple Is Used to Connect two Fittings Directly Together

Part NumberPP5/32PP3/16PP1/4PP5/16PP3/8PP1/2

PP04 use PP5/32PP06PP08 use PP5/16PP10PP12PP16

Part NumberPGJ1/4-5/32PGJ5/16-5/32PGJ5/16-1/4PGJ3/8-1/4PGJ3/8-5/16PGJ1/2-1/4PGJ1/2-5/16PGJ1/2-3/8

PGJ06-04PGJ08-04 use PGJ5/16-5/32PGJ08-06PGJ10-06PGJ10-08PGJ12-06PGJ12-08PGJ12-10

Part NumberPLGJ5/32-1/8PLGJ3/16-5/32PLGJ1/4-5/32PLGJ1/4-3/16PLGJ5/16-1/4PLGJ3/8-5/16PLGJ1/2-3/8

PLGJ06-04PLGJ08-06PLGJ10-08PLGJ12-10

Part NumberPWJ5/32-1/8PWJ1/4-5/32PWJ5/16-1/4PWJ3/8-5/16PWJ1/2-3/8

PWJ06-04PWJ08-06PWJ10-08PWJ12-10

Part NumberPIJ5/32PIJ3/16PIJ1/4PIJ5/16PIJ3/8PIJ1/2

PIJ04 use PIJ5/32PIJ06PIJ08 use PIJ5/16PIJ10PIJ12PIJ16

Part NumberPYJ5/32PYJ3/16PYJ1/4PYJ5/16PYJ3/8PYJ1/2

PYJ04 use PYJ5/32PYJ06PYJ08 use PYJ5/16PYJ10PYJ12PYJ16

Part NumberPLJ1/8PLJ5/32PLJ3/16PLJ1/4PLJ5/16PLJ3/8PLJ1/2

PLJ04 use PLJ5/32PLJ06PLJ08 use PLJ5/16PLJ10PLJ12

Part NumberPIG3/16-5/32PIG1/4-5/32PIG1/4-3/16PIG5/16-5/32PIG5/16-1/4PIG3/8-5/16PIG1/2-3/8

PIG06-04PIG08-04 use PIG5/16-5/32PIG08-06PIG10-06PIG10-08

PIG REDUCING NIPPLE

PYJ PLUG IN Y

PIJ NIPPLE

PLJ PLUG IN ELBOW

PWJ REDUCING Y

PP PLUG

PGJ PLUG IN REDUCER

PLGJ REDUCING ELBOW


Page 11



INCH & MM TUBE FITTINGS

PK MANIFOLD

JSC FLOW CONTROL INCH TUBE TO NPT

JSC FLOW CONTROL MM TUBE TO BSPT

JSU FLOW CONTROL MM & INCH TUBING

NASC FLOW CONTROL NPT THREADS

JSC FLOW CONTROL MM TUBE TO BSPP

Part Number Port SizeNASC-06 1/8NPTNASC-08 1/4NPTNASC-10 3/8NPTNASC-15 1/2NPT

PKJ MANIFOLDPKG MANIFOLD

The PK Manifold Has All Equal Size Ports The PKG Manifold Has Supply Ports of Equal Size & Three Reduced Side Ports

The PKJ Manifold Has a Stem & Opposite Tube Port of Equal Size & Three Reduced Side Ports

Part NumberPK5/32PK3/16PK1/4PK5/16

PK04 use PK5/32PK06PK08 use PK5/16

Part NumberJSU1/8JSU5/32JSU3/16JSU1/4JSU5/16JSU3/8JSU1/2

JSU04 use JSU5/32JSU06JSU08 use JSU5/16JSU10JSU12

Part NumberPKG3/16-5/32PKG1/4-5/32PKG5/16-5/32PKG5/16-1/4PKG3/8-1/4PKG3/8-5/16

PKG06-04PKG08-06PKG10-06PKG10-08PKG12-10

Part NumberJSC1/8-UJSC1/8-N1JSC5/32-UJSC5/32-N1JSC3/16-UJSC3/16-N1JSC3/16-N2JSC3/16-N3JSC1/4-UJSC1/4-N1JSC1/4-N2JSC1/4-N3JSC5/16-N1JSC5/16-N2JSC5/16-N3JSC3/8-N2JSC3/8-N3JSC3/8-N4JSC1/2-N3JSC1/2-N4

Part NumberJSC04-01JSC04-02JSC06-01JSC06-02JSC06-03JSC06-04JSC08-01JSC08-02JSC08-03JSC08-04JSC10-01JSC10-02JSC10-03JSC10-04JSC12-02JSC12-03JSC12-04

Part NumberJSC04-M5JSC04-M6JSC04-G01JSC04-G02JSC06-M5JSC06-M6JSC06-G01JSC06-G02JSC06-G03JSC06-G04JSC08-G01JSC08-G02JSC08-G03JSC08-G04JSC10-G01JSC10-G02JSC10-G03JSC10-G04JSC12-G02JSC12-G03JSC12-G04

Part NumberPKJ3/16-5/32PKJ1/4-5/32PKJ5/16-5/32PKJ5/16-1/4PKJ3/8-1/4PKJ3/8-5/16

PKJ06-04PKJ08-04 use PKJ5/16-5/32PKJ08-06PKJ10-06PKJ10-08


Page 12


MANIFOLDS & FLOW CONTROLS

MANIFOLDS

FLOW CONTROLS

Part Number Inch to NPTBL1/8-UBL1/8-N1BL1/8-N2BL5/32-UBL5/32-N1BL5/32-N2BL1/4-N1BL1/4-N2BL1/4-N3BL1/4-N4BL5/16-N1BL5/16-N2BL5/16-N3BL5/16-N4BL3/8-N1BL3/8-N2BL3/8-N3BL3/8-N4BL1/2-N2BL1/2-N3BL1/2-N4

Part Number - Inch to NPTBB1/8-UBB1/8-N1BB1/8-N2BB5/32-UBB5/32-N1BB5/32-N2BB1/4-N1BB1/4-N2BB1/4-N3BB1/4-N4BB5/16-N1BB5/16-N2BB5/16-N3BB5/16-N4BB3/8-N1BB3/8-N2BB3/8-N3BB3/8-N4BB1/2-N2BB1/2-N3BB1/2-N4

Part Number - Inch to NPTBC1/8-UBC1/8-N1BC1/8-N2BC5/32-UBC5/32-N1BC5/32-N2BC1/4-N1BC1/4-N2BC1/4-N3BC1/4-N4BC5/16-N1BC5/16-N2BC5/16-N3BC5/16-N4BC3/8-N1BC3/8-N2BC3/8-N3BC3/8-N4BC1/2-N2BC1/2-N3BC1/2-N4

Part Number Inch & mm TubingUniversal ThreadsBC1/8-U01BC1/8-U02BC5/32-U01BC5/32-U02BC06-U01BC06-U02BC06-U03BC06-U04BC1/4-U01BC1/4-U02BC1/4-U03BC1/4-U04BC5/16-U01BC5/16-U02BC5/16-U03BC5/16-U04BC3/8-U01BC3/8-U02BC3/8-U03BC3/8-U04BC10-U01BC10-U02BC10-U03BC10-U04BC12-U02BC12-U03BC12-U04

Part Number Inch & mm TubingUniversal ThreadsBL1/8-U01BL1/8-U02BL5/32-U01BL5/32-U02BL06-U01BL06-U02BL06-U03BL06-U04BL1/4-U01BL1/4-U02BL1/4-U03BL1/4-U04BL5/16-U01BL5/16-U02BL5/16-U03BL5/16-U04BL3/8-U01BL3/8-U02BL3/8-U03BL3/8-U04BL10-U01BL10-U02BL10-U03BL10-U04BL12-U02BL12-U03BL12-U04

Part Number Inch & mm TubingUniversal Threads BB1/8-U01BB1/8-U02BB5/32-U01BB5/32-U02BB06-U01BB06-U02BB06-U03BB06-U04BB1/4-U01BB1/4-U02BB1/4-U03BB1/4-U04BB5/16-U01BB5/16-U02BB5/16-U03BB5/16-U04BB3/8-U01BB3/8-U02BB3/8-U03BB3/8-U04BB10-U01BB10-U02BB10-U03BB10-U04BB12-U02BB12-U03BB12-U04

BC MALE STUD BB BRANCH TEEBL ELBOW


Page 13



The Pneuforce brass nickel plated push to connect fi ttings have been developed for use in harsh environments and applications.

Designed for low and high temperature operation these fi ttings exceed all normal criteria expected of a standard push to connect fi tting.

SPECIFICATIONSMinimum Operating Temperature -40ºC / -40ºFMaximum Operating Temperature +120ºC / +248ºFMinimum Operating Pressure 29”Hg (vacuum)Maximum Operating Pressure 12bar(g) / 176psi(g)

ALL METAL FITTINGS

BD RUN TEE BE UNION TEE

BG REDUCING UNION

BV UNION ELBOWBM BULKHEAD

BU UNIONPart NumberBE1/8BE5/32BE1/4BE5/16BE3/8BE1/2

BE04 use BE5/32BE06BE08 use BE5/16BE10BE12

Part NumberBG1/4-5/32BG5/16-1/4BG3/8-5/16BG1/2-3/8

BG06-04BG10-08BG12-10

Part NumberBV1/8BV5/32BV1/4BV5/16BV3/8BV1/2

BV04 use BV5/32BV06BV08 use BV5/16BV10BV12

Part NumberBM1/8BM5/32BM1/4BM5/16BM3/8BM1/2

BM04 use BM5/32BM06BM08 use BM5/16BM10BM12

Part NumberBU1/8BU5/32BU1/4BU5/16BU3/8BU1/2

BU04 use BU5/32BU06BU08 use BU5/16BU10BU12

Part Number - Inch to NPTBD1/8-UBD1/8-N1BD1/8-N2BD5/32-UBD5/32-N1BD5/32-N2BD1/4-N1BD1/4-N2BD1/4-N3BD1/4-N4BD5/16-N1BD5/16-N2BD5/16-N3BD5/16-N4BD3/8-N1BD3/8-N2BD3/8-N3BD3/8-N4BD1/2-N2BD1/2-N3BD1/2-N4

Part Number Inch & mm TubingUniversal Threads BD1/8-U01BD1/8-U02BD5/32-U01BD5/32-U02BD06-U01BD06-U02BD06-U03BD06-U04BD1/4-U01BD1/4-U02BD1/4-U03BD1/4-U04BD5/16-U01BD5/16-U02BD5/16-U03BD5/16-U04BD3/8-U01BD3/8-U02BD3/8-U03BD3/8-U04BD10-U01BD10-U02BD10-U03BD10-U04BD12-U02BD12-U03BD12-U04


Page 14



ALL METAL FITTINGS

The Pneuforce brass nickel plated push to connect fi ttings have been developed for use in harsh environments and applications.

Designed for low and high temperature operation these fi ttings exceed all normal criteria expected of a standard push to connect fi tting.

SPECIFICATIONSMinimum Operating Temperature -40ºC / -40ºFMaximum Operating Temperature +120ºC / +248ºFMinimum Operating Pressure 29”Hg (vacuum)Maximum Operating Pressure 12bar(g) / 176psi(g)

MODEL Tube ØD THREAD A (mm) B (mm) H (inch) C PC1/8-U 1/8 10-32UNF 3.8 20.3

7/16” 3/32”

PC1/8-N1 1/8NPT 7.5 19.8 PC5/32-U 5/32

(4mm)

10-32UNF 3.8 20.3 PC5/32-N1 1/8NPT 7.5 19.8 PC5/32-N2 1/4NPT 10.5 18.9 9/16” PC3/16-U

3/16

10-32UNF 3.8 20.9 9/16” PC3/16-N1 1/8NPT 7.5 20.6 5/32” PC3/16-N2 1/4NPT 10.5 23.7 9/16”

PC3/16-N3 3/8NPT 11.0 21.2 11/16” PC1/4-U

1/4

10-32UNF 3.8 21.2 1/2" 3/32” PC1/4-N1 1/8NPT 7.5 20.9

5/32” PC1/4-N2 1/4NPT 10.5 23.7 9/16” PC1/4-N3 3/8NPT 11.0 21.2 11/16” PC5/16-N1 5/16

(8mm)

1/8NPT 7.5 25.9 9/16” 3/16” PC5/16-N2 1/4NPT 10.5 25.9 7/32” PC5/16-N3 3/8NPT 11.0 22.4

11/16” PC3/8-N1

3/8

1/8NPT 7.5 28.2 3/16” PC3/8-N2 1/4NPT 10.5 30.5 7/32” PC3/8-N3 3/8NPT 11.0 27.5 5/16” PC3/8-N4 1/2NPT 14.0 25.8

7/8”

5/16” PC1/2-N2

1/2 1/4NPT 10.5 33.9 1/4”

PC1/2-N3 3/8NPT 11.0 30.4 5/16” PC1/2-N4 1/2NPT 14.0 33.4 5/16”

MODEL Tube ØD THREAD A (mm) B (mm) H (mm) C POC1/8-U

1/8 10-32UNF 3.8 20.3

Ø10.0 3/32”POC1/8-N1 1/8NPT 7.5 19.8 POC5/32-U 5/32

(4mm) 10-32UNF 3.8 20.3

POC5/32-N1 1/8NPT 7.5 19.8 POC1/4-U

1/4 10-32UNF 3.8 21.2 Ø12.0 POC1/4-N1 1/8NPT 7.5 20.9 5/32”POC1/4-N2 1/4NPT 10.5 23.7

Ø14.0 POC5/16-N1 5/16 (8mm)

1/8NPT 7.5 25.9 3/16”POC5/16-N2 1/4NPT 10.5 25.9

7/32”POC5/16-N3 3/8NPT 11.0 22.4 Ø17.0 POC3/8-N2

3/8 1/4NPT 10.5 30.5

POC3/8-N3 3/8NPT 11.0 27.5 5/16”POC3/8-N4 1/2NPT 14.0 25.8

Ø21.0 POC1/2-N2 1/2

1/4NPT 10.5 33.9 1/4" POC1/2-N3 3/8NPT 11.0 30.4 5/16”POC1/2-N4 1/2NPT 14.0 33.4

MODEL Tube ØD THREAD A B H PCF1/8-U 1/8 10-32UNF 4 23.8 7/16” PCF1/8-N1 1/8NPT 7.5 9/16 PCF5/32-N1 5/32

(4mm) 1/8NPT 7.5 23.8

PCF5/32-N2 1/4NPT 10.5 26.8 11/16” PCF3/16-N1 3/16 1/8NPT 7.5 24.4 9/16” PCF3/16-N2 1/4NPT 10.5 27.4 11/16” PCF1/4-N1 1/4 1/8NPT 7.5 24.9 9/16” PCF1/4-N2 1/4NPT 10.5 27.9 11/16” PCF5/16-N1 5/16

(8mm)

1/8NPT 7.5 26.4 9/16” PCF5/16-N2 1/4NPT 10.5 29.4 11/16” PCF5/16-N3 3/8NPT 11.0 29.9 7/8” PCF3/8-N2 3/8 1/4NPT 10.5 31.2 11/16” PCF3/8-N3 3/8NPT 11.0 31.7

7/8” PCF1/2-N2 1/2 1/4NPT 10.5 34.4 PCF1/2-N3 3/8NPT 11.0 34.9

Male Connector

Male Round Connector

Female Connector

Inch to NPT Fittings

Vacuforce Edition 4 Page 29

MODEL Tube ØD THREAD A B E H PL1/8-U 1/8 10-32UNF

3.8 22.0 17.5 7/16” PL1/8-N1 1/8NPT

PL5/32-U 5/32 (4mm)

10-32UNF PL5/32-N1 1/8NPT 7.5 24.0 PL5/32-N2 1/4NPT 10.5 28.0 9/16” PL3/16-U

3/16

10-32UNF 3.8 22.0

17.8 7/16” PL3/16-N1 1/8NPT 7.5 24.5

PL3/16-N2 1/4NPT 10.5 28.0 9/16” PL3/16-N3 3/8NPT 11.0 29.0 11/16” PL1/4-U

1/4

10-32UNF 3.8 24.4

19.0 1/2” PL1/4-N1 1/8NPT 7.5 25.7

PL1/4-N2 1/4NPT 10.5 29.2 9/16” PL1/4-N3 3/8NPT 11.0 30.2 11/16” PL5/16-N1 5/16

(8mm)

1/8NPT 7.5 29.5 22.8 9/16” PL5/16-N2 1/4NPT 10.5 32.5

PL5/16-N3 3/8NPT 11.0 33.5

11/16” PL3/8-N1

3/8

1/8NPT 7.5 34.3

26.3 PL3/8-N2 1/4NPT 10.5 37.3 PL3/8-N3 3/8NPT 11.0 37.8 PL3/8-N4 1/2NPT 14.0 41.3

7/8” PL1/2-N2 1/2

1/4NPT 10.5 39.5 29.6 PL1/2-N3 3/8NPT 11.0 40.0

PL1/2-N4 1/2NPT 14.0 43.0

MODEL Tube ØD THREAD A B E HPLH1/8-U 1/8 10-32UNF 3.8 20.7

16.5

7/16” PLH1/8-N1 1/8NPT 7.5 22.7 PLH5/32-U 5/32

(4mm) 10-32UNF 3.8 20.7

PLH5/32-N1 1/8NPT 7.5 22.7 PLH5/32-N2 1/4NPT 10.5 26.7 9/16”PLH3/16-U

3/16 10-32UNF 3.8 20.7 7/16” PLH3/16-N1 1/8NPT 7.5 23.2

PLH3/16-N2 1/4NPT 10.5 26.7 7/16”PLH3/16-N3 3/8NPT 11.0 27.7 17.4PLH1/4-U

1/4 10-32UNF 3.8 23.1

17.7 12.7 PLH1/4-N1 1/8NPT 7.5 24.4

PLH1/4-N2 1/4NPT 10.5 27.9 14.3PLH1/4-N3 3/8NPT 11.0 28.9 17.4PLH5/16-N1 5/16

(8mm) 1/8NPT 7.5 27.6

20.9 7/16” PLH5/16-N2 1/4NPT 10.5 30.6 PLH5/16-N3 3/8NPT 11.0 31.6

17.4 PLH3/8-N13/8

1/8NPT 7.5 30.2 22.2 PLH3/8-N2 1/4NPT 10.5 33.2

PLH3/8-N3 3/8NPT 11.0 33.7 PLH3/8-N4 1/2NPT 14.0 37.2

22.2 PLH1/2-N21/2

1/4NPT 10.5 36.2 26.3 PLH1/2-N3 3/8NPT 11.0 36.7

PLH1/2-N4 1/2NPT 14.0 39.7

MODEL Tube ØD THREAD A B E HPLL1/8-U 1/8 10-32UNF 3.8 33.5

17.5 7/16” PLL1/8-N1 1/8NPT 7.5 36.0 PLL5/32-U 5/32

(4mm)10-32UNF 3.8 33.5

PLL5/32-N1 1/8NPT 7.5 36.0 PLL3/16-N1

3/16 1/8NPT 36.0

17.8 PLL3/16-N2 1/4NPT 10.5 39.5 9/16”PLL3/16-N3 3/8NPT 11.0 40.5 11/16”PLL1/4-N1

1/4 1/8NPT 7.5 39.7

19.0 12.7

PLL1/4-N2 1/4NPT 10.5 43.2 9/16”PLL1/4-N3 3/8NPT 11.0 44.2 11/16”PLL5/16-N1 5/16

(8mm) 1/8NPT 7.5 44.8

22.8 9/16” PLL5/16-N2 1/4NPT 10.5 47.8 PLL5/16-N3 3/8NPT 11.0 48.8

11/16” PLL3/8-N23/8

1/4NPT 10.5 56.3 26.3 PLL3/8-N3 3/8NPT 11.0 57.8

PLL3/8-N4 1/2NPT 14.0 61.3 7/8” PLL1/2-N2

1/2 1/4NPT 10.5 62.5

29.6 PLL1/2-N3 3/8NPT 11.0 63.0 PLL1/2-N4 1/2NPT 14.0 66.0

Male Swivel Elbow

Male 45º Swivel Elbow

Male Extended Swivel Elbow



MODEL Tube ØD THREAD A B E H PB1/8-U 1/8 10-32UNF 3.8 23.0

18.5 7/16” PB1/8-N1 1/8NPT 7.5 25.0 PB5/32-U 5/32

(4mm)

10-32UNF 3.8 23.0 PB5/32-N1 1/8NPT 7.5 25.0 PB5/32-N2 1/4NPT 10.5 29.0 9/16 PB3/16-U

3/16

10-32UNF 3.8 23.0

18.8 7/16” PB3/16-N1 1/8NPT 7.5 25.5

PB3/16-N2 1/4NPT 10.5 29.0 9/16 PB3/16-N3 3/8NPT 11.0 30.0 11/16” PB1/4-U

1/4

10-32UNF 3.8 24.7

19.3 1/2” PB1/4-N1 1/8NPT 7.5 26.0

PB1/4-N2 1/4NPT 10.5 29.5 9/16 PB1/4-N3 3/8NPT 11.0 30.5 11/16” PB5/16-N1 5/16

(8mm)

1/8NPT 7.5 29.45 22.75 9/16 PB5/16-N2 1/4NPT 10.5 32.45

PB5/16-N3 3/8NPT 11.0 33.45

11/16” PB3/8-N1

3/8

1/8NPT 7.5 35.0

27.0 PB3/8-N2 1/4NPT 10.5 38.0 PB3/8-N3 3/8NPT 11.0 38.5 PB3/8-N4 1/2NPT 14.0 42.0

7/8” PB1/2-N2 1/2

1/4NPT 10.5 39.5 29.6 PB1/2-N3 3/8NPT 11.0 40.0

PB1/2-N4 1/2NPT 14.0 43.0

MODEL Tube ØD THREAD A B E H PD1/8-U 1/8 10-32UNF 3.8 23.0

18.5 7/16” PD1/8-N1 1/8NPT 7.5 25.0 PD5/32-U 5/32

(4mm)

10-32UNF 3.8 23.0 PD5/32-N1 1/8NPT 7.5 25.0 PD5/32-N2 1/4NPT 10.5 29.0 9/16 PD3/16-U

3/16

10-32UNF 3.8 23.0

18.8 7/16” PD3/16-N1 1/8NPT 7.5 25.5

PD3/16-N2 1/4NPT 10.5 29.0 9/16 PD3/16-N3 3/8NPT 11.0 30.0 11/16” PD1/4-U

1/4

10-32UNF 3.8 24.7

19.3 1/2” PD1/4-N1 1/8NPT 7.5 26.0

PD1/4-N2 1/4NPT 10.5 29.5 9/16 PD1/4-N3 3/8NPT 11.0 30.5 11/16” PD5/16-N1 5/16

(8mm)

1/8NPT 7.5 29.45 22.75 9/16 PD5/16-N2 1/4NPT 10.5 32.45

PD5/16-N3 3/8NPT 11.0 33.45

11/16” PD3/8-N1

3/8

1/8NPT 7.5 35.0

27.0 PD3/8-N2 1/4NPT 10.5 38.0 PD3/8-N3 3/8NPT 11.0 38.5 PD3/8-N4 1/2NPT 14.0 42.0

7/8” PD1/2-N2 1/2

1/4NPT 10.5 39.5 29.6 PD1/2-N3 3/8NPT 11.0 40.0

PD1/2-N4 1/2NPT 14.0 43.0

MODEL TUBE ØD THREAD A B E H PLF1/8-U 1/8 10-32UNF 3.8 23.5 17.5 9/16 PLF5/32-N1 5/32 (4mm) 1/8NPT 7.5 PLF3/16-N1 3/16 1/8NPT 7.5 23.8 17.8 PLF3/16-N2 1/4NPT 10.5 26.5 11/16” PLF1/4-N1 1/4 1/8NPT 7.5 24.9 19.0 9/16 PLF1/4-N2 1/4NPT 10.5 27.9 11/16” PLF5/16-N1 5/16

(8mm)

1/8NPT 7.5 27.5 22.8

9/16 PLF5/16-N2 1/4NPT 10.5 31.0 11/16” PLF5/16-N3 3/8NPT 11.0 32.0 7/8” PLF3/8-N2 3/8 1/4NPT 10.5 35.3 26.3 11/16” PLF3/8-N3 3/8NPT 11.0 35.8 7/8” PLF1/2-N3 1/2 3/8NPT 11.0 37.5 29.6 PLF1/2-N4 1/2NPT 14.0 40.5 25.4

Female Swivel Elbow

Branch Tee

Run Tee



MODEL Tube ØD THREAD A B F H PX1/8-U 1/8 10-32UNF 3.8 40.0

14 7/16” PX1/8-N1 1/8NPT 7.5 42.0 PX5/32-U 5/32

(4mm)

10-32UNF 3.8 40.0 PX5/32-N1 1/8NPT 7.5 42.0 PX5/32-N2 1/4NPT 10.5 46.0 9/16 PX3/16-U

3/16

10-32UNF 3.8 40.3

9/16 9/16” PX3/16-N1 1/8NPT 7.5 42.8

PX3/16-N2 1/4NPT 10.5 46.3 9/16 PX3/16-N3 3/8NPT 11.0 47.3 11/16”PX1/4-U

1/4

10-32UNF 3.8 42.5

14.8 1/2” PX1/4-N1 1/8NPT 7.5 43.8

PX1/4-N2 1/4NPT 10.5 47.3 9/16 PX1/4-N3 3/8NPT 11.0 48.3 11/16”PX5/16-N1 5/16

(8mm)

1/8NPT 7.5 47.1 18.2 9/16 PX5/16-N2 1/4NPT 10.5 50.1

PX5/16-N3 3/8NPT 11.0 51.1

11/16”PX3/8-N1

3/8

1/8NPT 7.5 55.1

19.5 PX3/8-N2 1/4NPT 10.5 58.1 PX3/8-N3 3/8NPT 11.0 58.6 PX3/8-N4 1/2NPT 14.0 62.1

7/8” PX1/2-N2 1/2

1/4NPT 10.5 63.1 21.6 PX1/2-N3 3/8NPT 11.0 63.6

PX1/2-N4 1/2NPT 14.0 66.6

MODEL TUBE ØD THREAD A B H E PH1/8-U 1/8 10-32UNF 3.8 17.0 8.0 20.0 PH1/8-N1 1/8NPT 7.5 23.5 11.1 20.3 PH5/32-U 5/32

(4mm) 10-32UNF 3.8 17.0 8.0 20.0

PH5/32-N1 1/8NPT 7.5 23.5 11.1 22.3 PH3/16-U

3/16 10-32UNF 3.8 17.0 8.0 20.3

PH3/16-N1 1/8NPT 7.5 23.5 11.1 22.6 PH3/16-N2 1/4NPT 10.5 27.3 9/16 24.3 PH1/4-N1 1/4 1/8NPT 7.5 23.5 11.1 23.1 PH1/4-N2 1/4NPT 10.5 27.3 9/16 25.1 PH5/16-N1 5/16

(8mm)

1/8NPT 7.5 23.5 11.1 25.6 PH5/16-N2 1/4NPT 10.5 27.3 9/16 28.6 PH5/16-N3 3/8NPT 11.0 32.4 19.0 29.6 PH3/8-N2 3/8 1/4NPT 10.5 27.3 9/16 31.0 PH3/8-N3 3/8NPT 11.0 32.4 19.0 31.6 PH1/2-N3 1/2 3/8NPT 11.0 32.4 19.0 35.6 PH1/2-N4 1/2NPT 14.0 39.1 25.4 36.6

MODEL TUBE THREAD A1 A2 H B E PHF1/8-U

1/8 10-32UNF 3.8 5.5 7/16” 19.5 20.0

PHF1/8-N1 1/8NPT 7.5 7.5 9/16” 30.0 22.3 PHF5/32-U 5/32

(4mm) 10-32UNF 3.8 5.5 7/16” 19.5 20.0

PHF5/32-N1 1/8NPT 7.5 7.5 9/16 30.0 22.3 PHF3/16-U

3/16 10-32UNF 3.8 5.5 11.1 19.5 20.3

PHF3/16-N1 1/8NPT 7.5 7.5 9/16 30.0 22.6 PHF3/16-N2 1/4NPT 10. 10.5 11/16” 35.8 24.3 PHF1/4-N1 1/4 1/8NPT 7.5 7.5 9/16 30.0 23.1 PHF1/4-N2 1/4NPT 10. 10.5 11/16” 35.8 25.1 PHF5/16-N1

5/16

(8mm)

1/8NPT 7.5 7.5 9/16 30.0 25.6 PHF5/16-N2 1/4NPT 10. 10.5 11/16” 35.8 28.6 PHF5/16-N3 3/8NPT 11.0 11.0 7/8” 40.9 29.6 PHF3/8-N2

3/8 1/4NPT 10. 10.5 11/16” 35.8 31.0

PHF3/8-N3 3/8NPT 11.0 11.0 7/8” 40.9 31.6 PHF1/2-N3

1/2 3/8NPT 11.0 11.0 7/8” 40.9 35.6

PHF1/2-N4 1/2NPT 14. 14.0 25.4 49.0 36.6

Branch ‘Y’

Universal Elbow

Universal Female Elbow



MODEL TUBE ØD THREAD M A H1 H2 B PMF5/32-N1 5/32 (4mm) 1/8NPT M12 7.5 9/16 9/16 23.8 PMF3/16-N1 3/16 1/8NPT

M14

7.5

11/16”

24.7 PMF3/16-N2 1/4NPT 10.5

11/16”

30.4 PMF1/4-N1 1/4 1/8NPT 7.5 24.7 PMF1/4-N2 1/4NPT 10.5 30.4 PMF5/16-N1

5/16 (8mm)

1/8NPT M16

7.5 19.0 19.0

27.9 PMF5/16-N2 1/4NPT 10.5 35.9 PMF5/16-N3 3/8NPT 11.0 35.4 PMF3/8-N2 3/8 1/4NPT M20 10.5 7/8” 7/8” 31.9 PMF3/8-N3 3/8NPT 11.0 34.7 PMF1/2-N3 1/2 3/8NPT M22 11.0 25.4 25.4 35.4 PMF1/2-N4 1/2NPT 14.0 41.4

Female Bulkhead

MODEL ØD1 ØD2 H THREAD E F B A PKD3/16-5/32-N1 3/16 5/32

(4mm)

11.1 1/8NPT 19.0 36.0 64.3 7.5 PKD1/4-5/32-N1 1/4 12.7 19.0 36.0 64.3 PKD5/16-5/32-N2 5/16

(8mm) 14.3 1/4NPT 20.0

42.0 72.3 10.5 PKD5/16-3/16-N2 3/16 20.3 PKD5/16-1/4-N2 1/4 20.3

PKD3/8-5/16-N3 3/8 5/16 (8mm) 17.4 3/8NPT 24.3 48.0 91.5 11.0

4 Port Threaded Manifold



Universal TRI and BSPP(G) Threads Inch and mm Tube

Male Swivel Elbow – Universal Thread

MODEL ØD Thread A B E H PL1/8-U01 1/8 1/8 5.0 24.0

17.5 14 PL5/32-M5 5/32” (4mm)

M5 4.0 23.0 PL5/32-U01 1/8 5.0 24.0 PL5/32-U02 1/4 5.8 25.3 17 PL06-M5

6

M5 4.0 25.0

19

14 PL06-U01 1/8 5.0 25.2 PL06-U02 1/4 5.8 26.5 17 PL06-U03 3/8 6.8 28.0 20 PL1/4-U01

1/4” 1/8 5.0 25.2 14

PL1/4-U02 1/4 5.8 26.5 17 PL1/4-U03 3/8 6.8 28.0 20 PL5/16-U01

5/16” (8mm)

1/8 5.0 28.5

22.8

14 PL5/16-U02 1/4 5.8 29.8 17 PL5/16-U03 3/8 6.8 31.3 20 PL5/16-U04 1/2 8.0 32.5 24 PL10-U01

10

1/8 5.0 33.3

26.3

17 PL10-U02 1/4 5.8 34.1 PL10-U03 3/8 6.8 35.6 20 PL10-U04 1/2 8.0 37.8 24 PL3/8-U01

3/8”

1/8 5.0 33.3 17 PL3/8-U02 1/4 5.8 34.1 PL3/8-U03 3/8 6.8 35.6 20 PL3/8-U04 1/2 8.0 37.8 24 PL12-U02

12 1/4 5.8 36.8

29.6 21

PL12-U03 3/8 6.8 37.8 PL12-U04 1/2 8.0 39.5 PL1/2-U02

1/2" 1/4 5.8 36.8

PL1/2-U03 3/8 6.8 37.8 PL1/2-U04 1/2 8.0 39.5

Male Connector – Universal Thread

MODEL Tube ØD Thread A B L H C

PC5/32-U01 5/32” (4mm)

1/8 5.0 16.6 3.9 103/32 PC5/32-U02 1/4 5.8 14

PC06-M56

M5 4.0 21.0 6.0

12

PC06-U01 1/8 5.0 19.9 6.7

5/32” PC06-U02 1/4 5.8 20.4 6.4 PC06-U03 3/8 6.8 20.0 4.5 PC1/4-U01

1/4" 1/8 5.0 19.9 6.7

PC1/4-U02 1/4 5.8 20.4 6.4 PC1/4-U03 3/8 6.8 20.0 4.5 PC5/16-U01 5/16”

(8mm) 1/8 5.0 24.4 11.1

14 3/16”

PC5/16-U02 1/4 5.8 22.2 7.0 7/32” PC5/16-U03 3/8 6.8 21.2 4.5 PC3/8-U01

3/8” 1/8 5.0 26.3 11.0

17

3/16”PC3/8-U02 1/4 5.8 27.5 13.9 7/32”PC3/8-U03 3/8 6.8 25.0 8.9 5/16” PC3/8-U04 1/2 8.0 22.7 4.9 PC10-U01

10 1/8 5.0 26.3 11.0 5mm

PC10-U02 1/4 5.8 27.5 13.9 6mmPC10-U03 3/8 6.8 25.0 8.9 5/16” PC10-U04 1/2 8.0 22.7 4.9 PC12-U02

12 1/4 5.8 31.2 12.0

20

6mmPC12-U03 3/8 6.8 28.2 11.0 5/16” PC12-U04 1/2 8.0 28.9 9.5 PC1/2-U02

1/2" 1/4 5.8 31.2 12.0 1/4"

PC1/2-U03 3/8 6.8 28.2 11.0 5/16” PC1/2-U04 1/2 8.0 28.9 9.5

The following three pages are the unique pneuforce TRI THREAD series. These fitting

threads screw into all corresponding sizes of NPT, BSPP, BSPT and NPSF female threads.



MODEL ØD Thread A B E H PD5/32-U01 5/32”

(4mm) 1/8 5.0 25.0 18.5 14

PD5/32-U02 1/4 5.8 26.3 17 PD06-M5

6

M5 4.0 24.5

19

14 PD06-U01 1/8 5.0 25.5 PD06-U02 1/4 5.8 26.8 17 PD06-U03 3/8 6.8 28.3 20 PD1/4-U01

1/4" 1/8 5.0 25.5 14

PD1/4-U02 1/4 5.8 26.8 17 PD1/4-U03 3/8 6.8 28.3 20 PD5/16-U01 5/16”

(8mm)

1/8 5.0 28.5 22.75

14 PD5/16-U02 1/4 5.8 29.8 17 PD5/16-U03 3/8 6.8 31.3 20 PD3/8-U01

3/8”

1/8 5.0 34.0

27

17 PD3/8-U02 1/4 5.8 34.8 PD3/8-U03 3/8 6.8 36.3 20 PD3/8-U04 1/2 8.0 38.5 24 PD10-U01

10

1/8 5.0 34.0 17 PD10-U02 1/4 5.8 34.8 PD10-U03 3/8 6.8 36.3 20 PD10-U04 1/2 8.0 38.5 24 PD12-U02

12 1/4 5.8 36.8

30

21 PD12-U03 3/8 6.8 37.8 PD12-U04 1/2 8.0 39.5 24 PD1/2-U02

1/2" 1/4 5.8 36.8 21 PD1/2-U03 3/8 6.8 37.8

PD1/2-U04 1/2 8.0 39.5 24

MODEL ØD Thread A B E H PLL5/32-M5 5/32”

(4mm)

M5 4.0 37.7 17.5 10 PLL5/32-U01 1/8 5.0 38.7

PLL5/32-U02 1/4 5.8 40.5 17 PLL06-M5

6

M5 4.0 38.0

19

14 PLL06-U01 1/8 5.0 38.7 PLL06-U02 1/4 5.8 40.5 17 PLL06-U03 3/8 6.8 42.0 20 PLL06-U04 1/2 8.0 43.2 24 PLL1/4-U01

1/4"

1/8 5.0 38.7 14 PLL1/4-U02 1/4 5.8 40.5 17 PLL1/4-U03 3/8 6.8 42.0 20 PLL1/4-U04 1/2 8.0 43.2 24 PLL5/16-U01

5/16” (8mm)

1/8 5.0 43.3

23

14 PLL5/16-U02 1/4 5.8 45.1 17 PLL5/16-U03 3/8 6.8 46.7 20 PLL5/16-U04 1/2 8.0 47.8 24 PLL3/8-U01

3/8”

1/8 5.0 52.8

26

17 PLL3/8-U02 1/4 5.8 54.0 PLL3/8-U03 3/8 6.8 55.6 20 PLL3/8-U04 1/2 8.0 57.8 24 PLL10-U01

10

1/8 5.0 52.8 17 PLL10-U02 1/4 5.8 54.0 PLL10-U03 3/8 6.8 55.6 20 PLL10-U04 1/2 8.0 57.8 24 PLL12-U02

12 1/4 5.8 56.8

29.6 20 PLL12-U03 3/8 6.8 57.8 PLL12-U04 1/2 8.0 59.5 24 PLL1/2-U02

1/2 1/4 5.8 56.8

29.6 20 PLL1/2-U03 3/8 6.8 57.8 PLL1/2-U04 1/2 8.0 59.5 24

Run Tee - Universal Thread

Male Extended Swivel Elbow - Universal Thread



MODEL ØD Thread A B E H PB5/32-U01 5/32”

(4mm) 1/8 5.0 25.0 18.5 14

PB5/32-U02 1/4 5.8 26.3 17 PB06-M5

6

M5 4.0 24.5

19

14 PB06-U01 1/8 5.0 25.5 PB06-U02 1/4 5.8 26.8 17 PB06-U03 3/8 6.8 28.3 20 PB1/4-U01

1/4" 1/8 5.0 25.5 14

PB1/4-U02 1/4 5.8 26.8 17 PB1/4-U03 3/8 6.8 28.3 20 PB5/16-U01

5/16” (8mm)

1/8 5.0 28.5

23

14 PB5/16-U02 1/4 5.8 29.8 17 PB5/16-U03 3/8 6.8 31.3 20 PB5/16-U04 1/2 8.0 32.5 24 PB3/8-U02

3/8” 1/4 5.8 34.8

27 17

PB3/8-U03 3/8 6.8 36.3 20 PB3/8-U04 1/2 8.0 38.5 24 PB10-U02

10 1/4 5.8 34.8

27 17

PB10-U03 3/8 6.8 36.3 20 PB10-U04 1/2 8.0 38.5 24 PB12-U02

12 1/4 5.8 36.8

30 21 PB12-U03 3/8 6.8 37.8 PB12-U04 1/2 8.0 39.5 24 PB1/2-U02

1/2" 1/4 5.8 36.8

30 21

PB1/2-U03 3/8 6.8 37.8 PB1/2-U04 1/2 8.0 39.5 24

Branch Tee - Universal Thread

Branch ‘Y’ - Universal Thread MODEL ØD Thread A B F H PX5/32-U01 5/32”

(4mm) 1/8 5.0 42.0 14.0 14

PX5/32-U02 1/4 5.8 43.3 17 PX06-M5

6

M5 4.0 42.5

14.8

14 PX06-U01 1/8 5.0 43.3 PX06-U02 1/4 5.8 44.6 17 PX06-U03 3/8 6.8 46.1 20 PX06-U04 1/2 8.0 47.3 24 PX1/4-U01

1/4"

1/8 5.0 43.3 14 PX1/4-U02 1/4 5.8 44.6 17 PX1/4-U03 3/8 6.8 46.1 20 PX1/4-U04 1/2 8.0 47.3 24 PX5/16-U01

5/16” (8mm)

1/8 5.0 46.1

18.2

14 PX5/16-U02 1/4 5.8 47.4 17 PX5/16-U03 3/8 6.8 48.9 20 PX5/16-U04 1/2 8.0 50.1 24 PX3/8-U01

3/8”

1/8 5.0 54.1

19.5

17 PX3/8-U02 1/4 5.8 54.9 PX3/8-U03 3/8 6.8 56.4 20 PX3/8-U04 1/2 8.0 58.6 24 PX10-U01

10

1/8 5.0 54.1 17 PX10-U02 1/4 5.8 54.9 PX10-U03 3/8 6.8 56.4 20 PX10-U04 1/2 8.0 58.6 24 PX12-U02

12 1/4 5.8 60.4

21.6

21 PX12-U03 3/8 6.8 61.4 PX12-U04 1/2 8.0 63.1 24 PX1/2-U02

1/2" 1/4 5.8 60.4 21 PX1/2-U03 3/8 6.8 61.4

PX1/2-U04 1/2 8.0 63.1 24


BSPP(G) & BSPT(R) Threads mm Tube

Female Connector MODEL ØD Thread A B H L PCF04-G01 5/32”

(4mm) G1/8 7.0 23.3 14 9.5

PCF04-G02 G1/4 9.0 25.3 17 11.5 PCF06-M5

6

M5 7.0 24.4 14 10.0 PCF06-G01 G1/8 PCF06-G02 G1/4 9.0 26.4 17 12.0 PCF06-G03 G3/8 10.0 27.4 19 13.0 PCF08-G01

5/16” (8mm)

G1/8 7.0 25.9 14 10.0 PCF08-G02 G1/4 9.0 27.9 17 12.0 PCF08-G03 G3/8 10.0 28.9 19 13.0 PCF08-G04 G1/2 12.0 30.9 24 15.0 PCF10-G01

10

G1/8 7.0 27.7 17 10.0 PCF10-G02 G1/4 9.0 29.7 13.3 PCF10-G03 G3/8 10.0 30.7 19 14.3 PCF10-G04 G1/2 12.0 32.7 24 16.3 PCF12-G02

12 G1/4 9.0 32.9 20 11.0

PCF12-G03 G3/8 10.0 33.9 12.0 PCF12-G04 G1/2 12.0 35.9 24 15.5

MODEL Tube ØD Thread A B ΦP C

POC04-M6 5/32 (4mm)

M6 4.5 20.8 10 2.0 POC04-01 R1/8 7.0 19.3 3.0 POC04-02 R1/4 9.5 17.9 14 POC06-M5

6

M5 3.8 21.0 12 2.0 POC06-M6 M6 4.5 21.7

POC06-01 R1/8 7.0 20.4 4.0 POC06-02 R1/4 9.5 22.7 14

POC06-03 R3/8 10.5 20.7 17 POC08-01

5/16 (8mm)

R1/8 7.0 25.4 14 5.0 POC08-02 R1/4 9.5 24.9

6.0 POC08-03 R3/8 10.5 21.9 17 POC08-04 R1/2 13.5 25.9 21 POC10-01

10

R1/8 7.0 27.7 17

5.0 POC10-02 R1/4 9.5 29.5 6.0 POC10-03 R3/8 10.5 27.0 8.0 POC10-04 R1/2 13.5 25.3 21 POC12-02

12 R1/4 9.5 32.9 20 6.0

POC12-03 R3/8 10.5 29.9 8.0 POC12-04 R1/2 13.5 32.9 21

Male Round Connector

For POC04-M5 use POC5/32-U (same fitting)

The following fittings are all BSPP and BSPT threaded models. For metric tube models not shown such as stud and elbows as shown on the right, please refer to the TRI THREAD series shown on preceding pages.



MODEL ØD Thread A B H E

PH04-G01 5/32” (4mm) G1/8 5.0 22.5 10 22.3

PH06-G01 6 G1/8 5.0 23.1 PH06-G02 G1/4 5.8 26.2 14 25.15 PH08-G01 5/16”

(8mm)

G1/8 5.0 22.5 10 25.6 PH08-G02 G1/4 5.8 26.2 14 28.65 PH08-G03 G3/8 6.8 31.7 19 29.6 PH10-G02 10 G1/4 5.8 26.2 14 31.05 PH10-G03 G3/8 6.8 31.7 19 31.6 PH12-G03 12 G3/8 6.8 35.6 PH12-G04 G1/2 8.0 37.1 24 36.6

Universal Swivel Elbow

MODEL ØD G1 G2 A1 A2 H B E PHF04-G01 4 G1/8 G1/8 5.5 7.0

14 30.0 22.3

PHF06-M5 6

M5 M5 3.8 3.8 23.1 PHF06-G01 G1/8 G1/8 5.5 7.0

PHF06-G02 G1/4 G1/4 6.5 9.0 17 33.7 25.1 PHF08-G01

8 G1/8 G1/8 5.5 7.0 14 30.0 25.6

PHF08-G02 G1/4 G1/4 6.5 9.0 17 33.7 28.6 PHF08-G03 G3/8 G3/8 7.5 10.0 19 39.7 29.6 PHF10-G02 10 G1/4 G1/4 6.5 9.0 17 33.7 31.1 PHF10-G03

G3/8 G3/8 7.5 10.0 19

39.7 31.6

PHF12-G03 12 19 35.6 PHF12-G04 G1/2 G1/2 9.0 12.0 24 45.0 36.6

Female Bulkhead MODEL ØD Thread M A H1 H2 L B PMF04-G01 5/32”

(4mm)G1/8 M12 7.0 14 14 9.5 23.3

PMF04-G02 G1/4 9.0 17 11.6 25.4 PMF06-G01

6 G1/8

M14 7.0 17

17 7.0 24.2

PMF06-G02 G1/4 9.0 17 12.0 29.2 PMF06-G03 G3/8 10.0 19 13.0 30.2 PMF08-G01

5/16” (8mm)

G1/8

M16

7.0 19

19

5.0 27.4 PMF08-G02 G1/4 9.0 19 12.0 34.4 PMF08-G03 G3/8 10.0 19 13.0 34.4 PMF08-G04 G1/2 12.0 24 15.0 36.4 PMF10-G01

10

G1/8

M20

7.0 21

24

7.7 28.4 PMF10-G02 G1/4 9.0 21 9.7 30.4 PMF10-G03 G3/8 10.0 21 13.0 33.7 PMF10-G04 G1/2 12.0 24 15.0 35.7 PMF12-G02

12 G1/4

M22 9.0 24

27 9.1 33.5

PMF12-G03 G3/8 10.0 24 10.0 34.4 PMF12-G04 G1/2 12.0 24 15.0 39.4

Female Swivel Elbow

For PH04-M5 use PH5/32-U (same fitting)

For PHF04-M5 use PHF5/32-U (same fitting)



MODEL ØD Thread A B E H PLH04-G01 5/32”

(4mm) G1/8 5.0 22.7 16.2 14

PLH04-G02 G1/4 5.8 24.0 17 PLH06-M5

6

M5 3.8 22.7

17.7

14 PLH06-G01 G1/8 5.0 23.9 PLH06-G02 G1/4 5.8 25.2 17 PLH06-G03 G3/8 6.8 26.7 20 PLH06-G04 G1/2 8.0 27.9 24 PLH08-G01

5/16” (8mm)

G1/8 5.0 26.6

20.9

14 PLH08-G02 G1/4 5.8 27.9 17 PLH08-G03 G3/8 6.8 29.4 20 PLH08-G04 G1/2 8.0 30.6 24 PLH10-G01

10

G1/8 5.0 29.2

22.2 17 PLH10-G02 G1/4 5.8 30.0

PLH10-G03 G3/8 6.8 31.5 20 PLH10-G04 G1/2 8.0 33.7 24 PLH12-G02

12 G1/4 5.8 33.5

26.3 21 PLH12-G03 G3/8 6.8 34.5 PLH12-G04 G1/2 8.0 36.2 24

Male 45º Swivel Elbow

MODEL ØD Thread A B E H PLF04-G01 5/32”

(4mm) G1/8 7.0 23.0

17.5 14

PLF04-G02 G1/4 9.0 25.0 17 PLF06-M5

6

M5 3.8 24.4

19.0

14 PLF06-G01 G1/8 7.0 24.4 14 PLF06-G02 G1/4 9.0 26.4 17 PLF06-G03 G3/8 10.0 27.7 19 PLF08-G01

5/16” (8mm)

G1/8 7.0 24.8

22.8

14 PLF08-G02 G1/4 9.0 27.0 17 PLF08-G03 G3/8 10.0 28.5 19 PLF08-G04 G1/2 12.0 30.5 24 PLF10-G01

10

G1/8 7.0 23.0

26.3 17

PLF10-G02 G1/4 9.0 29.5 PLF10-G03 G3/8 10.0 31.0 19 PLF10-G04 G1/2 12.0 33.5 24 PLF12-G02

12 G1/4 9.0 26.0

29.6 21

PLF12-G03 G3/8 10.0 34.0 PLF12-G04 G1/2 12.0 36.5 24

Female Elbow Connector

MODEL ØD1 ØD2 H Thread E F B A Ød PKD06-04-G01 6 5/32”

(4mm) 14 G1/8 19.0 36 63.8 5.0

3.2 PKD08-04-G02 8 17 G1/4 20.0 42 69.6 5.8 PKD08-06-G02 6 20.3

PKD10-08-G03 10 5/16” (8mm) 20 G3/8 24.3 48 89.3 6.8 4.2

4 Port Threaded Manifold

For PLF04-M5 use PLF5/32-U (same fitting)

For PLH04-M5 use PLH5/32-U (same fitting)


Inch and mm Tube Fittings

MODEL TUBE ØD inch B PU1/8 1/8 33.0 PU5/32 5/32 PU3/16 3/16 33.6 PU1/4 1/4 35.2 PU5/16 5/16 39.1 PU3/8 3/8 45.2 PU1/2 1/2 49.2 MODEL TUBE ØD mm B PU04 Use PU5/32 shown above PU06 6 35.2 PU08 Use PU5/16 shown above PU10 10 45.2 PU12 12 49.2 PU16 16 51.0

MODEL TUBE ØD inch Ød E PV1/8 1/8

3.2 17.5 PV5/32 5/32 PV3/16 3/16 3.2 17.8 PV1/4 1/4 3.2 19.0 PV5/16 5/16 3.2 22.8 PV3/8 3/8 4.2 26.3 PV1/2 1/2 4.3 29.6 MODEL TUBE ØD mm Ød E PV04 Use PV5/32 shown above PV06 6 3.2 19.0 PV08 Use PV5/16 shown above PV10 10 4.2 26.3 PV12 12 4.3 29.6 PV16 16 5.1 33.0

MODEL TUBE ØD inch Ød E PE5/32 5/32 3.2 18.5 PE3/16 3/16 3.2 18.8 PE1/4 1/4 3.2 19.3 PE5/16 5/16 3.2 22.75 PE3/8 3/8 4.2 27.0 PE1/2 1/2 4.3 29.6 MODEL TUBE ØD mm Ød E PE04 Use PE5/32 shown above PE06 6 3.2 19.3 PE08 Use PE5/16 shown above PE10 10 4.2 27.0 PE12 12 4.3 29.6 PE16 16 5.1 33.0

MODEL TUBE ØD inch M E B H F PM1/8 1/8 M12 9.7 30.1 9/16 3.5 PM5/32 5/32 PM3/16 3/16 M14 7.5 31.8 11/16” 3.5 PM1/4 1/4 M14 7.5 31.8 11/16” 4.0 PM5/16 5/16 M16 6.8 35.3 19.0 4.5 PM3/8 3/8 M20 8.9 36.4 7/8” 5.0 PM1/2 1/2 M22 12.8 45.3 25.4 5.0 MODEL TUBE ØD mm M E B H F PM04 Use PM5/32 shown above PM06 6 M14 7.5 31.8 17 4.0 PM08 Use PM5/16 shown above PM10 10 M20 11.5 39.0 24 5.0 PM12 12 M22 12.8 45.3 27 5.0

Bulkhead Union Straight Union

Union Elbow Union Tee

Union ‘Y’

MODEL TUBE ØD inch Ød B F PY5/32 5/32

3.2

35.5 14.0 PY3/16 3/16 36.1 9/16 PY1/4 1/4 37.1 14.8 PY5/16 5/16 40.4 18.2 PY3/8 3/8 4.2 47.1 19.5 PY1/2 1/2 53.2 21.6 MODEL TUBE ØDmm Ød B F PY04 Use PY5/32 shown above PY06 6 3.2 37.1 9/16 PY08 Use PY5/16 shown above PY10 10 4.2 47.1 18.2 PY12 12 53.2 19.5 PY16 16 5.1 61.0 21.6

All dimensions are mm



MODEL TUBE ØD1 TUBE ØD2 B PG3/16-5/32 3/16 5/32 33.3 PG5/32-1/8 5/32 1/8 PG1/4-5/32 1/4 5/32 34.9 PG1/4-3/16 1/4 3/16 35.2 PG5/16-1/4 5/16 1/4 38.6 PG3/8-5/16 3/8 5/16 47.3 PG1/2-3/8 1/2 3/8 48.9 MODEL TUBE ØD1 TUBE ØD2 B PG06-04 6 4 33.6 PG08-06 8 6 36.1 PG10-08 10 8 41.8 PG12-10 12 10 46.1 PG16-12 16 12 50.1

MODEL TUBE ØD1

TUBE ØD2 Ød B F

PW3/16-5/32 3/16 5/32 3.2 35.8 14.0

PW5/32-1/8 5/32 1/8 PW1/4-5/32 1/4 5/32 3.2 36.8 14.5PW1/4-3/16 1/4 3/16 3.2 37.1 14.8PW5/16-1/4 5/16 1/4 3.2 39.9 17.7PW3/8-1/4 3/8 1/4

4.2 47.9 20.3PW3/8-5/16 3/8 5/16 PW1/2-3/8 1/2 3/8 4.2 51.6 20.0

MODEL TUBE ØD1

TUBE ØD2 Ød B F

PW06-04 6 4 3.2 36.8 14.5PW08-06 8 6 3.2 39.9 17.7PW10-08 10 8 4.2 47.9 20.3PW12-10 12 10 4.2 51.6 20.0

Reducing Straight Union

MODEL TUBE ØD inch Ød E PZA5/32 5/32 3.2 17.5 PZA3/16 3/16 3.2 17.8 PZA1/4 1/4 3.2 19.3 PZA5/16 5/16 3.2 22.75 PZA3/8 3/8 4.2 27.0 PZA1/2 1/2 4.3 29.6 MODEL TUBE ØD mm Ød E PZA04 Use PZA5/32 shown above PZA06 6 3.2 19.3 PZA08 Use PZA5/16 shown above PZA10 10 4.2 27.0 PZA12 12 4.3 29.6

Union Cross

MODEL TUBE ØD inch B ØP1 ØP2 C PP5/32 5/32 28.0 5.0 3.0 15.0 PP3/16 3/16 28.0 5.0 3.0 15.0 PP1/4 1/4 33.0 7.0 3.0 17.0 PP5/16 5/16 37.0 9.0 4.0 18.0 PP3/8 3/8 42.0 11.0 5.0 20.5 PP1/2 1/2 44.0 13.0 6.0 23.0 MODEL TUBE ØD mm B ØP1 ØP2 C PP04 Use PP5/32 shown above PP06 6 33.0 7 3 17.0 PP08 Use PP5/16 shown above PP10 10 42.0 11.0 5 20.5 PP12 12 44.0 13.0 6 23.0

Plug

Reducing Y Union

MODEL TUBE ØD1 TUBE ØD2 Ød E F PEG1/4-5/32 1/4 5/32 3.2 19.0 38.6 PEG5/16-1/4 5/16 1/4 3.2 22.3 45.5 PEG3/8-5/16 3/8 5/16 3.2 27.8 54 PEG1/2-3/8 1/2 3/8 4.2 29.3 59.2

MODEL TUBE ØD1 TUBE ØD2 Ød E PEG06-04 6 4 3.2 19.5 38.6 PEG08-06 8 6 3.2 20.3 45.5 PEG10-08 10 8 4.2 24.8 54.0 PEG12-10 12 10 4.2 28.5 59.2 PEG16-12 16 12 5.1 32.1 66.0

Reducing Union Tee




MODEL TUBE ØD1 inch TUBE ØD2 inch B C PGJ1/4-5/32 1/4 5/32 39.5 16.0PGJ5/16-5/32 5/16 41.5 18.6PGJ5/16-1/4 1/4 41.8PGJ3/8-1/4 3/8 46.5 20.0PGJ3/8-5/16 5/16 PGJ1/2-1/4

1/2 1/4 51.8

23.5PGJ1/2-5/16 5/16 52.3PGJ1/2-3/8 3/8 51.5 MODEL TUBE ØD1 mm TUBE ØD2 mm B C PGJ06-04 6 4 39.5 14.0PGJ08-04 8 41.5 14.0PGJ08-06 6 41.8 14.3PGJ10-06 10 46.8 17.3PGJ10-08 8 47.3 17.8PGJ12-06

12 6 51.8 19.3

PGJ12-08 8 52.3 19.8PGJ12-10 10 51.5 19.0

MODEL TUBE ØD inch B E PLJ5/32 5/32 33.0 17.5PLJ3/16 3/16 33.0 17.8PLJ1/4 1/4 36.2 19.0PLJ5/16 5/16 42.5 22.8PLJ3/8 3/8 50.8 26.3PLJ1/2 1/2 54.5 29.6MODEL TUBE ØD mm B E PLJ04 Use PLJ5/32 shown above PLJ06 6 36.2 19.0PLJ08 Use PLJ5/16 shown above

PLJ10 10 50.8 26.3PLJ12 12 54.5 29.6

MODEL TUBE ØD inch B

PIJ5/32 5/32/4mm 35.0 PIJ3/16 3/16 35.0 PIJ1/4 1/4 37.0 PIJ5/16 5/16 41.0 PIJ3/8 3/8 51.0 PIJ1/2 1/2 54.0

MODEL TUBE ØD mm B

PIJ04 Use PIJ5/32 shown abovePIJ06 6 37 PIJ08 8 41 PIJ10 10 51 PIJ12 12 54 PIJ16 16 58

MODEL TUBE ØD1 inch

TUBE ØD2inch C1 C2 B

PIG3/16-5/32 3/16 5/32 18.0 17.036.0PIG1/4-5/32 1/4 5/32 18.0 17.0

PIG1/4-3/16 1/4 3/16 18.0 17.0PIG5/16-1/4 3/16 1/4 20.0 18.0 39.0PIG3/8-5/16 3/8 5/16 25.0 20.0 46.0PIG1/2-3/8 1/2 3/8 27.0 26.0 54.0

MODEL TUBE ØD1 mm

TUBE ØD2mm C1 C2 B

PIG06-04 6 4 18 17 36 PIG08-06 8 6 20 18 39 PIG10-08 10 8 25 20 46 PIG12-10 12 10 27 26 54 PIG16-12 16 12 28 28 56

MODEL ØD inch F E BPK5/32 5/32 36 19.0 57.0 PK3/16 3/16 36 19.3 57.6 PK1/4 1/4 42 20.3 61.6 PK5/16 5/16 48 24.3 81.6 MODEL ØD mm F E B PK04 Use PK5/32 shown above PK06 6 42 20.3 61.6 PK08 8 48 24.3 81.6

Plug In Reducer Plug In Elbow

Nipple Reducing Nipple

5 Port Equal Manifold




MODEL TUBE ØD1 inch TUBE ØD2 mm B E PLGJ3/16-5/32 3/16 5/32 33.0 17.5 PLGJ1/4-5/32 1/4 5/32 35.0 17.5 PLGJ1/4-3/16 1/4 3/16 35.0 17.5 PLGJ5/16-1/4 5/16 1/4 39.2 19.0 PLGJ3/8-5/16 3/8 5/16 42.5 22.8 PLGJ1/2-3/8 1/2 3/8 52.8 26.3 MODEL TUBE ØD1 mm TUBE ØD2 B E PLGJ06-04 6 4 35.0 17.5 PLGJ08-06 8 6 39.2 19.0 PLGJ10-08 10 8 46.5 22.8 PLGJ12-10 12 10 52.8 26.3

MODEL TUBE ØD1 inch TUBE ØD2 inch Ød B F PWJ1/4-5/32 1/4 5/32 3.2 53.0 14.0PWJ5/16-1/4 5/16 1/4 3.2 57.3 14.8PWJ3/8-5/16 3/8 5/16 4.2 64.1 18.2PWJ1/2-3/8 1/2 3/8 4.2 73.6 19.5MODEL TUBE ØD1 mm TUBE ØD2 mm Ød B F PWJ06-04 6 4 3.2 53.0 14.0PWJ08-06 8 6 3.2 57.3 14.8PWJ10-08 10 8 4.2 64.1 18.2PWJ12-10 12 10 4.2 73.6 19.5

Plug In Reducing Elbow

Plug In Reducing ‘Y’

MODEL TUBE ØD inch Ød B F PYJ5/32 5/32 3.2 51.0 14.0PYJ3/16 3/16 3.2 51.3 9/16PYJ1/4 1/4 3.2 54.3 14.8PYJ5/16 5/16 3.2 60.1 18.2PYJ3/8 3/8 4.2 71.6 19.5PYJ1/2 1/2 4.2 78.1 21.6MODEL TUBE ØD mm Ød B F PYJ04 Use PYJ5/32 shown abovePYJ06 6 3.2 54.3 14.8PYJ08 Use PYJ5/16 shown above PYJ10 10 4.2 71.6 19.5PYJ12 12 4.2 78.1 21.6

Plug In ‘Y’




MODEL ØD1 inch ØD2 inch E F B PKG3/16-5/32 3/16

5/32 19.0 36.0 57.6 PKG1/4-5/32 1/4 PKG5/16-5/32

5/16 20.0

42.0 62.6 PKG5/16-3/16 3/16 20.3 PKG5/16-1/4 1/4 20.3 PKG3/8-1/4 3/8 23.8 48.0 80.0 PKG3/8-5/16 5/16 24.3 MODEL ØD1 mm ØD2 mm E F B PKG06-04 6 4 19.0 36 57.6 PKG08-04 Use PKG5/16-5/32 shown above PKG08-06 8 6 20.3 42 62.6 PKG10-06 10 23.8 48 80.0 PKG10-08 8 24.3

MODEL ØD1 inch ØD2 inch E F B PKJ3/16-5/32 3/16

5/32 19.0 36.0 72.8

PKJ1/4-5/32 1/4 19.0 74.8PKJ5/16-5/32

5/16 20.0

42.0 82.3PKJ5/16-3/16 3/16 20.3PKJ5/16-1/4 1/4 20.3PKJ3/8-1/4 3/8 23.8 48.0 104.5PKJ3/8-5/16 5/16 24.3MODEL ØD1 mm ØD2 mm E F B PKJ06-04 6 4 19.0 36 74.8PKJ08-04 Use PKJ5/16-5/32 PKJ08-06 8 6 20.3 42 82.3PKJ10-06 10 23.8 48 104.5PKJ10-08 8 24.3

5 Port Reducing Manifold

4 Port Stem Manifold



All Metal Fittings

MODEL ØD ThreadBPC06-U01 6mm 1/8BPC06-U02 1/4BPC1/4-U01 1/4" 1/8BPC1/4-U02 1/4BPC5/16-U01 5/16"

(8mm) 1/8

BPC5/16-U02 1/4BPC3/8-U01

3/8" 1/8

BPC3/8-U02 1/4BPC3/8-U03 3/8BPC10-U01

10mm 1/8

BPC10-U02 1/4BPC10-U03 3/8BPC12-U03 12mm 3/8BPC12-U04 1/2BPC1/2-U03 1/2" 3/8BPC1/2-U04 1/2

Male Swivel Elbow – Universal ThreadMale Stud – Universal Thread MODEL ØD Thread

BPL06-U01 6mm 1/8 BPL06-U02 1/4 BPL1/4-U01 1/4" 1/8 BPL1/4-U02 1/4 BPL5/16-U01 5/16"

(8mm) 1/8

BPL5/16-U02 1/4 BPL3/8-U01

3/8" 1/8

BPL3/8-U02 1/4 BPL3/8-U03 3/8 BPL10-U01

10mm 1/8

BPL10-U02 1/4 BPL10-U03 3/8 BPL12-U03 12mm 3/8 BPL12-U04 1/2 BPL1/2-U03 1/2" 3/8 BPL1/2-U04 1/2

MODEL ØD ThreadBPB06-U01 6mm 1/8BPB06-U02 1/4BPB1/4-U01 1/4" 1/8BPB1/4-U02 1/4BPB5/16-U01 5/16"

(8mm) 1/8

BPB5/16-U02 1/4BPB3/8-U01

3/8" 1/8

BPB3/8-U02 1/4BPB3/8-U03 3/8BPB10-U01

10mm 1/8

BPB10-U02 1/4BPB10-U03 3/8BPB12-U03 12mm 3/8BPB12-U04 1/2BPB1/2-U03 1/2" 3/8BPB1/2-U04 1/2

Branch Tee – Universal Thread MODEL ØD Thread

BPD06-U01 6mm 1/8 BPD06-U02 1/4 BPD1/4-U01 1/4" 1/8 BPD1/4-U02 1/4 BPD5/16-U01 5/16"

(8mm) 1/8

BPD5/16-U02 1/4 BPD3/8-U01

3/8" 1/8

BPD3/8-U02 1/4 BPD3/8-U03 3/8 BPD10-U01

10mm 1/8

BPD10-U02 1/4 BPD10-U03 3/8 BPD12-U03 12mm 3/8 BPD12-U04 1/2 BPD1/2-U03 1/2" 3/8 BPD1/2-U04 1/2

Run Tee – Universal Thread

These all brass nickel plated push to connect fittings havebeen developed for use in harsh environments andapplications. Designed for low and high temperature operation these fittings exceed all normal criteria expected of a standard push to connect fitting. The unique universal threads enable connection to all femaleBSPP, BSPT, NPT and NPSF threads.

SPECIFICATIONS Minimum Operating Temperature -40ºC / -40ºF Maximum Operating Temperature +120ºC / +248ºF Minimum Operating Pressure 29"Hg (vacuum) Maximum Operating Pressure 12bar(g) / 176psi(g)


All Metal Fittings

MODEL ØD BPE06 6mm BPE1/4 1/4" BPE5/16 5/16" / 8mm BPE3/8 3/8" BPE10 10mm BPE12 12mm BPE1/2 1/2"

Tee Union

MODEL ØDBPU06 6mmBPU1/4 1/4"BPU5/16 5/16" / 8mmBPU3/8 3/8"BPU10 10mmBPU12 12mmBPU1/2 1/2"

Straight Union

MODEL ØD BPY06 6mm BPY1/4 1/4" BPY5/16 5/16" / 8mm BPY3/8 3/8" BPY10 10mm BPY12 12mm BPY1/2 1/2"

Y Union MODEL ØD

BPV06 6mmBPV1/4 1/4"BPV5/16 5/16" / 8mmBPV3/8 3/8"BPV10 10mmBPVT12 12mmBPV1/2 1/2"

Union Elbow


Flow Controls


MODEL TUBE ØD Thread A H E B(max) JSC1/8-U 1/8 10-32UNF 3.8 8.0 20.0 29.3 JSC1/8-N1 NPT1/8 7.5 11.1 22.6 40.1 JSC5/32-U 5/32 10-32UNF 3.8 8.0 20.0 29.3 JSC5/32-N1 NPT1/8 7.5 11.1 22.6 40.1 JSC1/4-U

1/4

10-32UNF 3.8 8.0 22.0 29.3 JSC1/4-N1 NPT1/8 7.5 11.1 23.1 40.1 JSC1/4-N2 NPT1/4 10.5 9/16 25.1 47.2 JSC1/4-N3 NPT3/8 11.0 19.0 26.8 53.9 JSC5/16-N1

5/16 NPT1/8 7.5 11.1 25.6 40.1

JSC5/16-N2 NPT1/4 10.5 9/16 28.6 47.2 JSC5/16-N3 NPT3/8 11.0 19.0 29.6 53.9 JSC3/8-N2

3/8 NPT1/4 10.5 9/16 31.0 47.2

JSC3/8-N3 NPT3/8 11.0 19.0 31.6 53.9 JSC3/8-N4 NPT1/2 14.0 25.4 34.6 58.4 JSC1/2-N3 1/2 NPT3/8 11.0 19.0 35.6 53.9 JSC1/2-N4 NPT1/2 14.0 25.4 36.6 58.4

NPT to Inch Flow Control – Meter OUT (for Meter IN add B suffix e.g JSC1/4-N1B)

MODEL TUBE ØD Thread A H E B(max) JSC04-G01 4 G1/8 5.8 10 22.3 39.7 JSC04-G02 G1/4 7.3 14 24.1 46.4 JSC06-M5

6

M5 4.0 10 23.1 39.7 JSC06-G01 G1/8 5.8 JSC06-G02 G1/4 7.3 14 25.1 46.4 JSC06-G03 G3/8 8.5 19 26.8 53.4 JSC06-G04 G1/2 10.0 24 29.8 57.9 JSC08-G01

8

G1/8 5.8 10 25.6 39.7 JSC08-G02 G1/4 7.3 14 28.6 46.4 JSC08-G03 G3/8 8.5 19 29.6 53.4 JSC08-G04 G1/2 10.0 24 32.6 57.9 JSC10-G01

10

G1/8 5.8 10 28.8 39.7 JSC10-G02 G1/4 7.3 14 31.1 46.4 JSC10-G03 G3/8 8.5 19 31.6 53.4 JSC10-G04 G1/2 10.0 24 34.6 57.9 JSC12-G02

12 G1/4 7.3 14 33.5 46.4

JSC12-G03 G3/8 8.5 19 35.6 53.4 JSC12-G04 G1/2 10.0 24 36.6 57.9

MODEL TUBE ØD Ød A B E JSU1/8 1/8 3.2 14.0 28.8 39.5

JSU5/32 5/32 / 4mm 3.2 14 28.8 39.5 JSU06 6 4.3 20 42.6 47.6 JSU1/4 1/4 4.3 20.0 42.6 47.6

JSU5/16 5/16 / 8mm 4.3 22 44.3 52.6 JSU3/8 3/8 4.3 26.0 53.4 60.5 JSU10 10 4.3 26 53.4 60.5 JSU12 12 4.3 32 55.6 74.2 JSU1/2 1/2 4.3 32.0 55.6 74.2

BSPP (G) to mm Flow Control – Meter OUT (for Meter IN add B suffix e.g JSC1/4-N1B)

Inline Flow Control inch & mm For JSC04-M5 use JSC5/32-U (same flow control)

For JSU04 use JSU5/32 and for JSU08 use JSU5/16 (same flow controls)


Easy To Read IdentityTags for Reordering

All threaded fi ttings include the Pneuforce

Universal Thread

FITTINGS CHESTGet organized with the Pneuforce Fittings Chest!

• Over 40 Diff erent Compartments• Easy Carry Handle• Holds and Includes 420 Fittings• All threaded Models Have the Unique Pneuforce Universal Thread. • Fits Female NPT, NPSF, BSPT, & BSPP Threads• Double Layer Sturdy Construction Chest• Easy to read ID Tags for Reordering

Part Number - PNFMETRICMetric size tube fi ttings from 4mm (5/32”) to 10mm with universal threads on all threaded models. All 4mm and 8mm tube fi ttings are substituted with 5/32” and 5/16” models which are directly interchangable.

Part Number - PNFINCH

Get full listing of parts and contents at our website www.pneuforce.com/Pneumatics/push-to-connect-fi ttings/chests

Inch size tube fi ttings with universal threads on all threaded models.Tube Sizes5/32”1/4”5/16”3/8”

Tube Sizes5/32” (4mm)6mm5/16” (8mm)10mm

Thread Sizes1/8 Universal1/4 Universal3/8 Universal Thread Sizes

1/8 Universal1/4 Universal3/8 Universal


Page 15

FITTINGS CHEST

Documents

THREAD DATA - pneuforce.com · seal but are often used to attach to female BSPP threads. BSPT ... 3/8 and 1/2 male threads into the following female thread forms. NPT, NPSF, BSPP(G),