THOMSON CANFLEX Flexible Metal Hose · Hose Specifications page 01 / 06 Our corrugated metal hose comes in a variety of materials and braid layers to suit your specific requirements

THOMSON CANFLEX®

Flexible Metal Hose and Expansion Joints

GASKETS • SEALS • VALVES • FITTINGS

Fluid Containment and Control Specialists Since 1967

www.arthomson.com

Corporate Profile

a.r. thomson group was established in 1967 as

a regional manufacturer/distributor of gaskets and

other fluid sealing products. With the rapid growth

of oil and gas production, petrochemical refining,

pulp and paper industries, our manufacturing facili-

ties have been expanded to meet increased demand

for these products. We manufacture a wide variety

of gaskets by forming, CNC machining, Laser/Water-

jet cutting, stamping, and winding operations. In

addition to gaskets, we manufacture die-form pack-

ing for pumps, valves and fabricate seal specialties

for the oil production industry and now flexible

metal hose.

Our flexible metal hoses are manufactured by

certified B or C pressure welders and our product is

backed by a Canada wide CRN (Canadian Registered

Number). With our 24-hour service and 17 locations

across Canada, six Alberta based; we can quickly

manufacture and ship product direct or to your local

A.R. Thomson branch.

surrey, bc

edmonton, ab

red deer, ab

Parksville

EdmontonPrince George

Red Deer

Calgary

SurreyTrail

Saskatoon

Ft. McMurrayClairmont(GP)

Regina

Sarnia

Thunder Bay

Mississauga

Pointe-Claire, PQ

Dartmouth

New Brunswick

Winnipeg

A.R. Thomson Group Locations

*Red Deer County215 Clearskye WayT4E 0A1Phone: 403-341-4511Fax: 403-341-4243

*Denotes manufacturing location

Parksville#8, 1009 Allsbrook Rd.V9P 2A9Phone: 250-954-1543Fax: 250-954-1591

Calgary#7, 6320 - 11 Street SET2H 2L7Phone: 403-253-0161Fax: 403-258-0394

Dartmouth#32, 10 Morris DriveB3B 1M2Phone: 902-468-9120Fax: 902-468-9087

*Surrey3420 - 189 StreetV3Z 1A7Phone: 604-507-6050Fax: 604-507-6098

BRITISH COLUMBIA

ALBERTA

*Fort McMurray230F Mackay CrescentT9H 5C6Phone: 780-790-0730 Fax: 780-790-0278

Clairmont (GP)#102, 6902 - 98 StreetT0H 0W0Phone: 780-538-1792Fax: 780-538-3488

*Edmonton10030 - 31 AvenueT6N 1G4Phone: 780-450-8080Fax: 780-463-2021

*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445

SASKATCHEWAN

*Regina707E McDonald StreetS4N 5M2Phone: 306-584-2422Fax: 306-584-2599

Saskatoon707E McDonald StreetS4N 5M2Phone: 306-584-2422Fax: 306-584-2599

WinnipegResident Sales Rep.Phone: 204-999-3997Fax: 306-584-2599

Resident Sales Rep.Phone: 506-623-9254Fax: 506-773-3048

QUEBEC NOVA SCOTIA

ONTARIOMANITOBA

NEW BRUNSWICK

Mississauga#1A, 3350 Ridgeway Dr. L5L 5Z9Phone: 905-607-6587Fax: 905-607-6994

*Sarnia281 Campbell StreetN7T 2H2Phone: 519-336-3678Fax: 519-336-0589

Prince George#7, 1839 - 1 AvenueV2L 2Y8 Phone: 250-563-1444Fax: 250-563-2644

TrailResident Sales Rep. Phone: 250-368-1239Fax: 604-507-6098

Thunder BayResident Sales Rep.Phone: 807-623-0641 Fax: 807-623-5480

Hose Specifications pa g e 0 1 / 0 6

Our corrugated metal hose comes in a variety of materials and braid layers to suit your specific

requirements. The hose’s flexibility compensates for vibration, movement, and off axis alignment between

machinery. If you are unsure of what type of hose material your application will require, see the Corrosion

Evaluation Data section for clarification.

standard pitch corrugated hose

close pitch corrugated hose

Hose Size 1/4” - 1/2” 3/4” - 2” 2-1/2” - 4” 6” - 8”

I.D. Tolerance ±0.015 ±0.020 ±0.025 ±0.030

tolerances

material designations

Component Common Designation ASTM Designation Grade

304L ASTM A240 304L

316L ASTM A240 316L

321 ASTM A240 321

Monel 400 ASTM B127 (UNS N04400)

304L ASTM A580 304L

316L ASTM A580 316L

Monel 400 ASTM B164 (UNS N04400)

hose

braid

pa g e 0 2 / 0 6

NominalSize

no. of braids

I.D. (inch)

O.D. (inch)

MAWP @ 70°F (PSI) note 2

burst pressure 70°F (PSI) note 1

centerline bend radius (inch) dynamic / static

T (inch)

P (inch)average

1/4” 1 0.24 0.38 2360 9440 3.15 / 1.10 0.006 0.084

5/16” 1 0.32 0.48 1647 6588 4.85 / 1.23 0.006 0.087

3/8” 1 0.40 0.56 1639 6556 5.08 / 1.52 0.006 0.102

1/2” 1 0.48 0.66 1225 4900 5.47 / 1.75 0.006 0.122

5/8” 1 0.64 0.85 1124 4495 6.28 / 2.21 0.007 0.146

3/4” 1 0.80 1.05 980 3920 6.58 / 2.65 0.007 0.156

1” 1 1.00 1.27 693 2770 7.50 / 3.33 0.008 0.169

1-1/4” 1 1.33 1.62 600 2400 10.20 / 4.10 0.009 0.174

1-1/2” 1 1.57 1.95 557 2228 11.75 / 5.08 0.010 0.218

2” 1 1.98 2.38 570 2280 12.55 / 6.27 0.010 0.222

P3 1-Braid Standard/Close Pitch Corrugated Hose

Type 621 – 321 Close Pitch Corrugated Hose with SB 304L/316L Braid

Nominal no. of I.D. O.D. MAWP @ 70˚F burst pressure centerline bend T P (inch)size braids (inch) (inch) (PSI) note 2 70˚F (PSI) radius (inch) (inch) max / min note 1 dynamic / static

1/4” 1 0.31 0.57 1376 5505 3.00 / 1.00 0.008 0.091 / 0.083

2 0.64 2009 8037

3/8” 1 0.43 0.74 1205 4822 3.50 / 1.25 0.008 0.111 / 0.100

2 0.81 1760 7040

1/2” 1 0.57 0.89 1053 4214 4.00 / 1.50 0.008 0.107 / 0.097

2 0.96 1538 6152

3/4” 1 0.90 1.28 792 3168 6.00 / 2.25 0.010 0.138 / 0.121

2 1.35 1162 4650

1” 1 1.15 1.55 571 2285 7.00 / 2.75 0.010 0.162 / 0.146

2 1.63 834 3336

1-1/4” 1 1.32 1.93 499 1996 8.00 / 3.00 0.012 0.211 / 0.185

2 2.02 728 2914

1-1/2” 1 1.65 2.28 407 1631 9.00 / 3.50 0.012 0.255 / 0.218

2 2.37 595 2381

2” 1 2.03 2.61 309 1235 10.25 / 4.00 0.012 0.226 / 0.197

2 2.71 451 1803

Hose Specifications

Note : P3 hose dimensions are from Penflex P3 Hose Dimensions sheet.

pa g e 03 / 0 6


1/4” 1 0.31 0.57 1954 7815 5.00 / 1.00 0.010 0.116/ 0.104

2 0.64 3104 12415

3/8” 1 0.43 0.74 1331 5325 5.50 / 1.25 0.010 0.150 / 0.136

2 0.81 1944 7774

1/2” 1 0.56 0.89 824 3295 6.00 / 1.50 0.010 0.150 / 0.136

2 0.96 1226 4905

3/4” 1 0.80 1.28 700 2799 8.00 / 2.25 0.015 0.203 / 0.191

2 1.35 1022 4086

1” 1 1.06 1.58 571 2285 9.00 / 2.75 0.015 0.245 / 0.226

2 1.65 914 3654

1-1/4” 1 1.33 1.93 531 2125 10.50 / 3.50 0.015 0.267 / 0.245

2 2.02 776 3102

1-1/2” 1 1.66 2.28 472 1887 12.00 / 4.00 0.015 0.293 / 0.267

2 2.37 689 2755

2” 1 2.00 2.72 516 2064 15.00 / 5.00 0.015 0.308 / 0.279

2 2.84 757 3030

2-1/2” 1 2.55 3.33 387 1548 20.00 / 8.00 0.015 0.414 / 0.364

2 3.43 618 2472

3” 1 3.00 3.88 316 1264 22.00 / 9.00 0.015 0.444 / 0.387

2 3.98 461 1845

4” 1 4.00 4.98 232 927 27.00 / 13.00 0.015 0.444 / 0.387

2 5.10 338 1353

5” 1 5.00 6.03 182 729 31.00 / 18.00 0.018 0.522 / 0.444

2 6.15 266 1064

6” 1 6.00 7.10 126 503 36.00 / 19.00 0.018 0.522 / 0.444

2 7.33 262 1050

8” 1 7.87 9.19 218 870 33.50 / 29.50 0.024 0.667 / 0.545

2 9.28 374 1495

10” 1 9.82 11.32 211 843 37.50 / 33.50 0.024 0.750 / 0.600

2 11.45 308 1231

12” 1 11.79 13.37 161 643 55.50 / 47.50 0.028 0.857 / 0.667

2 13.50 245 939

14” 1 13.20 14.84 119 476 70.00 / 35.00 0.039 0.800 / 1.000

2 14.98 190 762

Type 704/716/721 – 304L/316L/321 Standard Pitch Corrugated Hose with SB 304L/316L Braid

Hose Specifications

pa g e 0 4 / 0 6


1/4” 1 0.31 0.58 1418 5675 5.00 / 1.00 0.010 0.117 / 0.104

2 0.66 2071 8285

1/2” 1 0.56 0.90 701 2805 8.00 / 1.50 0.012 0.150 / 0.136

2 0.98 1024 4095

3/4” 1 0.80 1.29 542 2171 8.00 / 2.00 0.015 0.203 / 0.191

2 1.38 867 3469

1” 1 1.06 1.58 464 1857 9.00 / 3.00 0.015 0.240 / 0.226

2 1.66 678 2711

1-1/2” 1 1.66 2.27 330 1322 12.00 / 4.00 0.015 0.293 / 0.267

2 2.35 482 1930

2” 1 2.00 2.59 316 1266 15.00 / 5.00 0.015 0.308 / 0.279

2 2.67 462 1848

3” 1 3.00 3.88 197 788 22.00 / 9.00 0.015 0.444 / 0.387

2 3.98 315 1258

Type 740 – Monel 400 Standard Pitch Corrugated Hose with MB Monel 400

Type 816/821 – 304L / 316L / 321 Close Pitch Corrugated Hose with SHB 304L / 316L Braid


1/2” 1 0.55 0.92 2194 8777 8.00 / 1.50 0.015 0.111 / 0.097

2 1.02 3267 13067

3/4” 1 0.80 1.31 1311 5244 8.00 / 2.00 0.018 0.158 / 0.136

2 1.41 1914 7656

1” 1 1.06 1.60 1069 4276 9.00 / 3.00 0.018 0.174 / 0.156

2 1.70 1710 6840

1-1/4” 1 1.33 1.97 1110 4443 10.00 / 3.25 0.020 0.203 / 0.191

2 2.10 1588 6353

1-1/2” 1 1.66 2.30 868 3472 10.00 / 3.25 0.020 0.293 / 0.267

2 2.43 1388 5552

2” 1 2.01 2.64 808 3231 11.50 / 5.38 0.020 0.226 / 0.211

2 2.76 1179 4717

2-1/2” 1 2.55 3.36 578 2312 24.00 / 7.00 0.020 0.267 / 0.245

2 3.49 915 3663

3” 1 3.00 3.91 540 2160 28.00 / 7.50 0.024 0.324 / 0.293

2 4.03 788 3154

4” 1 4.00 4.93 333 1332 40.00 / 20.00 0.024 0.445 / 0.387

2 5.05 486 1945

3 5.17 758 3035

6” 1 6.00 7.10 266 1062 95.00 / 24.00 0.024 0.522 / 0.444

2 7.33 401 1606

Hose Specifications

pa g e 0 5 / 0 6

Nominal no. of I.D. O.D. MAWP @ 70˚F burst pressure centerline bend T P (inch)size braids (inch) (inch) (PSI) note 2 70˚F (PSI) radius (inch) (inch) average note 1 dynamic / static

1/4” 1 0.31 0.58 2184 8735 12.00 / 6.00 0.012 0.067

2 0.64 3188 12753

3/8” 1 0.43 0.75 1921 7682 12.00 / 6.00 0.012 0.067

2 0.83 2804 11216

1/2” 1 0.56 0.92 2102 8406 14.00 / 7.00 0.015 0.100

2 1.02 3068 12273

3/4” 1 0.80 1.22 1986 7944 15.00 / 7.50 0.020 0.126

2 1.34 2899 11598

1” 1 1.05 1.65 1599 6397 16.00 / 8.00 0.020 0.150

2 1.77 2335 9340

1-1/4” 1 1.33 1.97 1317 5270 18.00 / 9.00 0.025 0.171

2 2.09 2107 8431

1-1/2” 1 1.66 2.31 1062 4247 19.00 / 9.50 0.025 0.188

2 2.43 1550 6201

2” 1 2.00 2.64 842 3368 24.00 / 12.00 0.025 0.214

2 2.77 1346 5388

3 2.90 2155 8620

Type 916 – 316L Close Pitch Corrugated Hose with HTSB 304L / 316L Braid

Type 1221 – 321 Close Pitch Corrugated Hose with SHB – 304L Braid

Nominal no. of I.D. O.D. MAWP @ 70˚F burst pressure T P (inch)size braids (inch) (inch) (PSI) note 2 70˚F (PSI) (inch) average note 1

3” 3 2.90 3.745 1305 5220 0.028 0.30

Note 1: Burst pressures are derived from A.R. Thomson Group burst test resultsNote 2: Maximum allowable working pressure (MAWP) is 0.25 of burst test pressureNote 3: Hose dimensions are from Penflex catalogues DH-EN-08 (01) & DS-EN-1000 (02)Note 4: Double braids burst test pressures are 1.46 times of single braid burst test pressure

Hose Specifications

pa g e 0 6 / 0 6

As the operating temperature of a hose assembly increases, the maximum working pressure

decreases. Pressure rating in the data sections of this catalogue are valid at 70ºF. For operating tempera-

tures in excess of 70°F the maximum working pressure must be decreased according to the Correction Factors

chart listed below.

CORRECTION FACTORS FOR ELEVATED TEMPERATURES

Braid Material

ASTM Designation A580 B164

304L 316L (UNS N04400)

working temperature correction factor

0

1

1

1

1

1

1

0.94

0.88

0.85

0.82

0.8

0.79

0.79

0.79

0.79

0.79

0.79

0.79

0.77

0.76

0.65

0.47

0

0

0

0

0

0

0

0

0

0

0

0

- 425

-325

-70

-50

-20

70

100

150

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

950

1000

1050

1100

1150

1200

1250

1300

1350

1400

1450

1500

1

1

1

1

1

1

1

1

1

1

1

0.97

0.93

0.91

0.88

0.86

0.83

0.82

0.80

0.79

0.77

0.76

0.71

0.59

0.46

0.37

0.3

0.23

0.19

0.15

0.12

0.10

0.06

0.05

0.05

1

1

1

1

1

1

1

1

1

1

1

0.97

0.93

0.91

0.86

0.83

0.8

0.79

0.77

0.75

0.74

0.72

0.7

0.68

0.67

0.64

0.61

0.52

0.38

0.28

0.2

0.14

0.1

0.07

0.05

procedure for temperature adjustment:

01. Determine the maximum operating temperature

02. Locate appropriate correction factor on the chart

03. Multiply the correction factor by maximum working pressure (MAWP) at 70º F psig specified for desired product.

Hose Specifications

npt pipe nipple (asme b36.10m)

NPS L T I.D. O.D. MAWP @ 70°F (psi) (inch) (npt) (inch) (inch) A106 A53 A312 TYPE B165 Gr. B Gr. A / Gr. B 304L / 316L

1/4 2 - 3 1/4 - 18 0.36 0.54 2026 1722 1798 2368

3/8 2 - 3 3/8 - 18 0.49 0.68 1740 1479 1543 2033

1/2 2 - 3 1/2 - 14 0.62 0.84 1511 1284 1340 1766

3/4 2 - 3 3/4 - 14 0.82 1.05 1313 1116 1165 1535

1 1-1/4 - 3 1 - 11-1/2 1.05 1.32 1172 996 1040 1370

1-1/4 1-1/4 - 3 1-1/4 - 1.38 1.66 1047 890 928 1223 11-1/2

1-1/2 1-1/4 - 3 1-1/2 - 1.61 1.90 989 840 877 1155 11-1/2

2 1-1/4 - 3 2 - 11-1/2 2.07 2.38 897 763 796 1049

2-1/2 1-1/4 - 3 2-1/2 - 8 2.47 2.88 883 750 783 1032

3 1-1/4 - 3 3 - 8 3.07 3.50 830 706 736 970

4 3 - 3-1/2 4 - 8 4.03 4.50 778 661 690 932

5 4 - 4-1/2 5 - 8 5.05 5.56 736 626 653 909

6 4 - 4-1/2 6 - 8 6.07 6.63 712 605 632 ----

NPS L T I.D. O.D. MAWP @ 70°F (psi) (inch) (npt) (inch) (inch) A106 A53 A53 A312 TYPE B165 Gr. B Gr. A Gr. B 304L/316L

1/4 2 - 3 1/4 - 18 0.30 0.54 3879 4437 3441 4534

3/8 2 - 3 3/8 - 18 0.42 0.68 3383 3869 3001 3954

1/2 2 - 3 1/2 - 14 0.55 0.84 2922 3342 2592 3415

3/4 2 - 3 3/4 - 14 0.74 1.05 2513 2875 2230 2937

1 1-1/4 - 3 1 - 11-1/2 0.96 1.32 2236 2558 1984 2614

1-1/4 1-1/4 - 3 1-1/4 - 1.28 1.66 1973 2257 1750 2306 11-1/2

1-1/2 1-1/4 - 3 1-1/2 - 1.50 1.90 1858 2125 1648 2171 11-1/2

2 1-1/4 - 3 2 - 11-1/2 1.94 2.38 1702 1946 1510 1989

2-1/2 1-1/4 - 3 2-1/2 - 8 2.32 2.88 1639 1875 1454 1916

3 1-1/4 - 3 3 - 8 2.90 3.50 1543 1764 1368 1803

4 3 - 3-1/2 4 - 8 3.83 4.50 1435 1641 1273 1728

5 4 - 4-1/2 5 - 8 4.81 5.56 1356 1551 1203 1677

6 4 - 4-1/2 6 - 8 5.76 6.63 1389 1589 1232 ----

End Fittings and Flange Adjustments

attachments

After selecting the hose type for your application you must then select the correct fittings. We provide our end fittings and flange attachments in a wide variety of sizes and materials to facilitate a broad range of connections. All fittings and flanges are welded to the hose and tested by means of Die Penetrant and Hydraulic Pressure Testing.

pa g e 0 1 / 1 5

Note: Pressure and dimensioning data may vary depending on supplier and is for reference only!

schedule 40

schedule 80


pa g e 0 2 / 1 5

ssp butt weld female 37˚ swivel connector (stainless steel only)

Weld T (UNF) L I.D. 1 I.D. 2 L1 W Hex W1 Hex MAWP

Size (inch) (inch) (inch) (inch) (inch) (inch) (psi)

1/4 7/16 - 20 1.41 0.25 0.17 0.35 9/16 9/16 5000

3/8 9/16 - 18 1.55 0.38 0.30 0.38 11/16 11/16 4500

1/2 3/4 - 16 1.68 0.50 0.39 0.43 7/8 7/8 4000

1/2 7/8 - 14 1.75 0.50 0.48 0.51 1 7/8 4000

3/4 1-1/16 - 12 1.83 0.75 0.61 0.57 1-1/4 1-1/16 3500

1 1-5/16 - 12 1.98 1.00 0.84 0.60 1-1/2 1-5/16 2500

1-1/4 1-5/8 - 12 2.25 1.25 1.08 0.63 2 1-3/4 2500

1-1/2 1-7/8 - 12 2.51 1.50 1.31 0.74 2-1/4 2 2000

2 2-1/2 - 12 2.93 2.00 1.78 0.94 2-7/8 2-1/2 1500

butt weld male pipe hexagon nipple

W L L1 N T I.D. WS MAWP @ 70°F (psi)

Hex (inch) (inch) (inch) (NPT) (inch) (inch) A108 1215 A276 Type 304L

9/16 1.31 0.63 0.25 1/4 - 18 0.27 0.56 3000 3000

11/16 1.31 0.63 0.25 3/8 - 18 0.39 0.69 3000 3000

7/8 1.56 0.81 0.31 1/2 - 14 0.52 0.88 3000 3000

1-1/16 1.56 0.81 0.31 3/4 - 14 0.69 1.06 3000 3000

1-5/16 1.81 1 0.38 1 - 11-1/2 0.94 1.31 3000 3000

1-7/8 2.06 1.06 0.56 1-1/4 - 1.27 1.88 3000 3000

11-1/2

1-7/8 2.06 1.06 0.56 1-1/2 - 1.52 1.88 3000 3000

11-1/2




pa g e 03 / 1 5

reducer (asme B16.9)

NPS Outside Diameter @ Bevel End-to-End Large End Small End (H)

3/4 X 1/2 1.05 0.84 1.503/4 X 3/8 1.05 0.68 1.501 X 3/4 1.32 1.05 2.001 X 1/2 1.32 0.84 2.001-1/4 X 1 1.66 1.32 2.001-1/4 X 3/4 1.66 1.05 2.001-1/4 X 1/2 1.66 0.84 2.001-1/2 X 1-1/4 1.90 1.66 2.501-1/2 X 1 1.90 1.32 2.501-1/2 X 3/4 1.90 1.05 2.501-1/2 X 1/2 1.90 0.84 2.502 X 1-1/2 2.38 1.90 3.002 X 1-1/4 2.38 1.66 3.002 X 1 2.38 1.32 3.002 X 3/4 2.38 1.05 3.002-1/2 X 2 2.88 2.38 3.502-1/2 X 1-1/2 2.88 1.90 3.502-1/2 X 1-1/4 2.88 1.66 3.502-1/2 X 1 2.88 1.32 3.503 X 2-1/2 3.50 2.88 3.503 X 2-1/2 3.50 2.38 3.503 X 1-1/2 3.50 1.90 3.503 X 1-1/4 3.50 1.66 3.503-1/2 X 3 4.00 3.50 4.003-1/2 X 2-1/2 4.00 2.88 4.003-1/2 X 2 4.00 2.38 4.003-1/2 X 1-1/2 4.00 1.90 4.003-1/2 X 1-1/4 4.00 1.66 4.004 X 3-1/2 4.50 4.00 4.004 X 3 4.50 3.50 4.004 X 2-1/2 4.50 2.88 4.004 X 2 4.50 2.38 4.004 X 1-1/2 4.50 1.90 4.005 X 4 5.56 4.50 5.005 X 3-1/2 5.56 4.00 5.005 X 3 5.56 3.50 5.005 X 2-1/2 5.56 2.88 5.005 X 2 5.56 2.38 5.006 X 5 6.62 5.56 5.506 X 4 6.62 4.50 5.506 X 3-1/2 6.62 4.00 5.506 X 3 6.62 3.50 5.506 X 2-1/2 6.62 2.88 5.50

NPS Outside Diameter @ Bevel End-to-End Large End Small End (H)

8 X 6 8.62 6.62 6.008 X 5 8.62 5.56 6.008 X 4 8.62 4.50 6.008 X 3-1/2 8.62 4.00 6.0010 X 8 10.75 8.62 7.0010 X 6 10.75 6.62 7.0010 X 5 10.75 5.56 7.0010 X 4 10.75 4.50 7.0012 X 10 12.75 10.75 8.0012 X 8 12.75 8.62 8.0012 X 6 12.75 6.62 8.0012 X 5 12.75 5.56 8.0014 X 12 14.00 12.75 13.0014 X 10 14.00 10.75 13.0014 X 8 14.00 8.62 13.0014 X 6 14.00 6.62 13.00

schedule 40

schedule 80


pa g e 0 4 / 1 5

short radius 90˚ elbow (asme B16.9)

Size I.D. O.D. A R MAWP @ 70°F (psi) (inch) (inch) (inch) (inch) A234 A403 A403 Gr. WPB Type 304L Type 316L 1 1.05 1.32 1.00 1.00 2455 28641-1/4 1.38 1.66 1.25 1.25 2024 23611-1/2 1.61 1.90 1.50 1.50 1832 21372 2.07 2.38 2.00 2.00 1563 18242-1/2 2.47 2.88 2.50 2.50 1708 19933 3.07 3.50 3.00 3.00 1474 17204 4.03 4.50 4.00 4.00 1253 14625 5.05 5.56 5.00 5.00 1101 12846 6.07 6.62 6.00 6.00 997 11638 7.98 8.62 8.00 8.00 891 103910 10.02 10.75 10.00 10.00 815 95112 11.94 12.75 12.00 12.00 762 88914 13.12 14.00 14.00 14.00 754 880

Size I.D. O.D. A R MAWP @ 70°F (psi) (inch) (inch) (inch) (inch) A234 A403 A403 Gr. WPB Type 304L Type 316L 1 0.96 1.32 1.00 1.00 3300 38501-1/4 1.28 1.66 1.25 1.25 2761 32221-1/2 1.50 1.90 1.50 1.50 2526 29472 1.94 2.38 2.00 2.00 2224 25942-1/2 2.32 2.88 2.50 2.50 2321 27083 2.90 3.50 3.00 3.00 2057 24004 3.83 4.50 4.00 4.00 1797 20975 4.81 5.56 5.00 5.00 1612 18816 5.76 6.62 6.00 6.00 1557 18178 7.63 8.62 8.00 8.00 1385 161610 9.56 10.75 10.00 10.00 1326 154712 11.37 12.75 12.00 12.00 1295 151114 12.50 14.00 14.00 14.00 1286 1500




pa g e 0 5 / 1 5

long radius 90˚ elbow (asme B16.9)

Size I.D. O.D. A R MAWP @ 70°F (psi) (inch) (inch) (inch) (inch) A234 A403 A403 Gr. WPB Type 304L Type 316L 1/2 0.62 0.84 1.50 1.50 3143 36673/4 0.84 1.05 1.50 1.50 2400 28001 1.05 1.32 1.50 1.50 2455 28641-1/4 1.38 1.66 1.88 1.88 2024 23611-1/2 1.61 1.90 2.25 2.25 1832 21372 2.07 2.38 3.00 3.00 1563 18242-1/2 2.47 2.88 3.75 3.75 1708 19933 3.07 3.50 4.50 4.50 1474 17204 4.03 4.50 6.00 6.00 1253 14625 5.05 5.56 7.50 7.50 1101 12846 6.07 6.62 9.00 9.00 997 11638 7.98 8.62 12.00 12.00 891 103910 10.02 10.75 15.00 15.00 815 95112 11.94 12.75 18.00 18.00 762 88914 13.12 14.00 21.00 21.00 754 880

Size I.D. O.D. A R MAWP @ 70°F (psi) (inch) (inch) (inch) (inch) A234 A403 A403 Gr. WPB Type 304L Type 316L 1/2 0.55 0.84 1.50 1.50 4143 48333/4 0.74 1.05 1.50 1.50 3543 41331 0.96 1.32 1.50 1.50 3300 38501-1/4 1.28 1.66 1.88 1.88 2761 32221-1/2 1.50 1.90 2.25 2.25 2526 29472 1.94 2.38 3.00 3.00 2224 25942-1/2 2.32 2.88 3.75 3.75 2321 27083 2.90 3.50 4.50 4.50 2057 24004 3.83 4.50 6.00 6.00 1797 20975 4.81 5.56 7.50 7.50 1612 18816 5.76 6.62 9.00 9.00 1557 18178 7.63 8.62 12.00 12.00 1385 161610 9.56 10.75 15.00 15.00 1326 154712 11.37 12.75 18.00 18.00 1295 1511

14 12.50 14.00 21.00 21.00 1286 1500



schedule 40

schedule 80


pa g e 0 6 / 1 5

long radius 45˚ elbow (asme B16.9)





schedule 40

schedule 80


pa g e 0 7 / 1 5

pipe weld end with 37-1/2˚ bevel (asme B36.10M)

NPS I.D. O.D. MAWP @ 70 ° F (psi) (inch) (inch) A106 Gr. B A312 304L A312 316L B165 1/4 0.36 0.54 5150 4569 4569 60193/8 0.49 0.68 4168 3697 3697 48711/2 0.62 0.84 3996 3545 3545 46703/4 0.82 1.05 3258 2891 2891 38081 1.05 1.32 3047 2703 2703 35621-1/4 1.38 1.66 2509 2226 2226 29331-1/2 1.61 1.90 2257 2002 2002 26382 2.07 2.38 1901 1687 1687 22222-1/2 2.47 2.88 2079 1845 1845 24303 3.07 3.50 1806 1602 1602 21104 4.03 4.50 1531 1358 1358 17895 5.05 5.56 1342 1190 1190 ----6 6.07 6.63 1219 1081 1081 ----8 7.98 8.62 1073 952 952 ----10 10.02 10.75 973 863 863 ----12 11.94 12.75 762 801 801 ----14 13.12 14.00 754 750 750 ----

NPS I.D. O.D. MAWP @ 70 ° F (psi) (inch) (inch) A106 Gr. B A312 304L A312 316L B165 1/4 0.30 0.54 5333 6222 6222 53333/8 0.42 0.68 4588 5353 5353 45881/2 0.55 0.84 4143 4833 4833 41433/4 0.74 1.05 3543 4133 4133 35431 0.96 1.32 3300 3850 3850 33001-1/4 1.28 1.66 2761 3222 3222 27611-1/2 1.50 1.90 2526 2947 2947 25262 1.94 2.38 2224 2594 2594 22242-1/2 2.32 2.88 2321 2708 2708 23213 2.90 3.50 2057 2400 2400 20574 3.83 4.50 1797 2097 2097 17975 4.81 5.56 1612 1881 1881 16126 5.76 6.63 1557 1817 1817 15578 7.63 8.63 1385 1616 1616 138510 9.56 10.75 1326 1547 1547 132612 11.37 12.75 1295 1511 1511 129514 12.50 14.00 1286 1500 1500 1286



schedule 40

schedule 80


pa g e 0 8 / 1 5

socket welding flanges (asme B16.5)

class 150

NPS O R X B B1 D C Y B.C.D. D # of Bolt Holes

1/2 3.50 1.38 1.19 0.88 0.62 0.38 0.44 0.62 2.38 0.62 4

3/4 3.88 1.69 1.50 1.09 0.82 0.44 0.50 0.62 2.75 0.62 4

1 4.25 2.00 1.94 1.36 1.05 0.50 0.56 0.69 3.12 0.62 4

1-1/4 4.62 2.50 2.31 1.70 1.38 0.56 0.62 0.81 3.50 0.62 4

1-1/2 5.00 2.88 2.56 1.95 1.61 0.62 0.69 0.88 3.88 0.62 4

2 6.00 3.62 3.06 2.44 2.07 0.69 0.75 1.00 4.75 0.75 4

2-1/2 7.00 4.12 3.56 2.94 2.47 0.75 0.88 1.12 5.50 0.75 4

3 7.50 5.00 4.25 3.57 3.07 0.81 0.94 1.19 6.00 0.75 4

4* 9.00 6.19 5.31 4.57 4.03 0.94 0.94 1.31 7.50 0.75 8

5* 10.00 7.31 6.44 5.66 5.05 0.94 0.94 1.44 8.50 0.88 8

6* 11.00 8.50 7.56 6.72 6.07 1.06 1.00 1.56 9.50 0.88 8

8* 13.50 10.62 9.69 8.72 7.98 1.25 1.12 1.75 11.75 0.88 8

10* 16.00 12.75 12.00 10.88 10.02 1.31 1.19 1.94 14.25 1.00 12

12* 19.00 15.00 14.38 12.88 12.00 1.56 1.25 2.19 17.00 1.00 12

14* 21.00 16.25 15.75 14.14 13.25 1.63 1.38 2.25 18.75 1.12 12

class 300

NPS O R X B B1 D C Y B.C.D. D # of Bolt Holes

1/2 3.75 1.38 1.50 0.88 0.62 0.38 0.56 0.88 2.62 0.62 4

3/4 4.62 1.69 1.88 1.09 0.82 0.44 0.62 1.00 3.25 0.75 4

1 4.88 2.00 2.12 1.36 1.05 0.50 0.69 1.06 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.70 1.38 0.56 0.75 1.06 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.95 1.61 0.62 0.81 1.19 4.50 0.88 4

2 6.50 3.62 3.31 2.44 2.07 0.69 0.88 1.31 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.94 2.47 0.75 1.00 1.50 5.88 0.88 8

3 8.25 5.00 4.62 3.57 3.07 0.81 1.12 1.69 6.62 0.88 8

class 400/600

NPS O R X B B1 D C Y B.C.D. D # of Bolt Holes1/2 3.75 1.38 1.50 0.88 0.38 0.56 0.88 2.62 0.62 4

3/4 4.62 1.69 1.88 1.09 0.44 0.62 1.00 3.25 0.75 4

1 4.88 2.00 2.12 1.36 0.50 0.69 1.06 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.70 0.56 0.81 1.12 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.95 0.62 0.88 1.25 4.50 0.88 4

2 6.50 3.62 3.31 2.44 0.69 1.00 1.44 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.94 0.75 1.12 1.62 5.88 0.88 8

3 8.25 5.00 4.62 3.57 0.81 1.25 1.81 6.62 0.88 8

To Be S

pecified

By Pu

rchaser


pa g e 0 9 / 1 5

slip-on welding flange (asme B16.5)

class 150

NPS O R X B C Y B.C.D. D # of Bolt Holes

1/2 3.50 1.38 1.19 0.88 0.44 0.62 2.38 0.62 4

3/4 3.88 1.69 1.50 1.09 0.50 0.62 2.75 0.62 4

1 4.25 2.00 1.94 1.36 0.56 0.69 3.12 0.62 4

1-1/4 4.62 2.50 2.31 1.70 0.62 0.81 3.50 0.62 4

1-1/2 5.00 2.88 2.56 1.95 0.69 0.88 3.88 0.62 4

2 6.00 3.62 3.06 2.44 0.75 1.00 4.75 0.75 4

2-1/2 7.00 4.12 3.56 2.94 0.88 1.12 5.50 0.75 4

3 7.50 5.00 4.25 3.57 0.94 1.19 6.00 0.75 4

4 9.00 6.19 5.31 4.57 0.94 1.31 7.50 0.75 8

5 10.00 7.31 6.44 5.66 0.94 1.44 8.50 0.88 8

6 11.00 8.50 7.56 6.72 1.00 1.56 9.50 0.88 8

8 13.50 10.62 9.69 8.72 1.12 1.75 11.75 0.88 8

10 16.00 12.75 12.00 10.88 1.19 1.94 14.25 1.00 12

12 19.00 15.00 14.38 12.88 1.25 2.19 17.00 1.00 12

14 21.00 16.25 15.75 14.14 1.38 2.25 18.75 1.12 12

class 300


1/2 3.75 1.38 1.50 0.88 0.56 0.88 2.62 0.62 4

3/4 4.62 1.69 1.88 1.09 0.62 1.00 3.25 0.75 4

1 4.88 2.00 2.12 1.36 0.69 1.06 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.70 0.75 1.06 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.95 0.81 1.19 4.50 0.88 4

2 6.50 3.62 3.31 2.44 0.88 1.31 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.94 1.00 1.50 5.88 0.88 8

3 8.25 5.00 4.62 3.57 1.12 1.69 6.62 0.88 8

4 10.00 6.19 5.75 4.57 1.25 1.88 7.88 0.88 8

5 11.00 7.31 7.00 5.66 1.38 2.00 9.25 0.88 8

6 12.50 8.50 8.12 6.72 1.44 2.06 10.62 0.88 12

8 15.00 10.62 10.25 8.72 1.62 2.44 13.00 1.00 12

10 17.50 12.75 12.62 10.88 1.88 2.62 15.25 1.12 16

12 20.50 15.00 14.75 12.88 2.00 2.88 17.75 1.25 16

14 23.00 16.25 16.75 14.14 2.12 3.00 20.25 1.25 20


pa g e 1 0 / 1 5

slip-on welding flange (asme B16.5)

class 400


1/2 3.75 1.38 1.50 0.88 0.56 0.88 2.62 0.62 4

3/4 4.62 1.69 1.88 1.09 0.62 1.00 3.25 0.75 4

1 4.88 2.00 2.12 1.36 0.69 1.06 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.70 0.81 1.12 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.95 0.88 1.25 4.50 0.88 4

2 6.50 3.62 3.31 2.44 1.00 1.44 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.94 1.12 1.62 5.88 0.88 8

3 8.25 5.00 4.62 3.57 1.25 1.81 6.62 0.88 8

4 10.00 6.19 5.75 4.57 1.38 2.00 7.88 1.00 8

5 11.00 7.31 7.00 5.66 1.50 2.12 9.25 1.00 8

6 12.50 8.50 8.12 6.72 1.62 2.25 10.62 1.00 12

8 15.00 10.62 10.25 8.72 1.88 2.69 13.00 1.12 12

10 17.50 12.75 12.62 10.88 2.12 2.88 15.25 1.25 16

12 20.50 15.00 14.75 12.88 2.25 3.12 17.75 1.38 16

14 23.00 16.25 16.75 14.14 2.38 3.31 20.25 1.38 20

class 600


1/2 3.75 1.38 1.50 0.88 0.56 0.88 2.62 0.62 4

3/4 4.62 1.69 1.88 1.09 0.62 1.00 3.25 0.75 4

1 4.88 2.00 2.12 1.36 0.69 1.06 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.70 0.81 1.12 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.95 0.88 1.25 4.50 0.88 4

2 6.50 3.62 3.31 2.44 1.00 1.44 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.94 1.12 1.62 5.88 0.88 8

3 8.25 5.00 4.62 3.57 1.25 1.81 6.62 0.88 8

4 10.75 6.19 6.00 4.57 1.50 2.12 8.50 1.00 8

5 13.00 7.31 7.44 5.66 1.75 2.38 10.50 1.12 8

6 14.00 8.50 8.75 6.72 1.88 2.62 11.50 1.12 12

8 16.50 10.62 10.75 8.75 2.19 3.00 13.75 1.25 12

10 20.00 12.75 13.50 10.88 2.50 3.38 17.00 1.38 16

12 22.00 15.00 15.75 12.88 2.62 3.62 19.25 1.38 20

14 23.75 16.25 17.00 14.14 2.75 3.69 20.75 1.50 20


pa g e 1 1 / 1 5

lapped joint flange (asme B16.5)

class 150


1/2 3.50 0.12 1.19 0.90 0.44 0.62 2.38 0.62 4

3/4 3.88 0.12 1.50 1.11 0.50 0.62 2.75 0.62 4

1 4.25 .12.19 1.94 1.38 0.56 69.00 3.12 0.62 4

1-1/4 4.62 0.25 2.31 1.72 0.62 0.81 3.50 0.62 4

1-1/2 5.00 0.31 2.56 1.97 0.69 0.88 3.88 0.62 4

2 6.00 0.31 3.06 2.46 0.75 1.00 4.75 0.75 4

2-1/2 7.00 0.38 3.56 2.97 0.88 1.12 5.50 0.75 4

3 7.50 0.38 4.25 3.60 0.94 1.19 6.00 0.75 4

4 9.00 0.44 5.31 4.60 0.94 1.31 7.50 0.75 8

5 10.00 0.50 6.44 5.69 0.94 1.44 8.50 0.88 8

6 11.00 0.50 7.56 6.75 1.00 1.56 9.50 0.88 8

8 13.50 0.50 9.69 8.75 1.12 1.75 11.75 0.88 8

10 16.00 0.50 12.00 10.92 1.19 1.94 14.25 1.00 12

12 19.00 0.50 14.38 12.92 1.25 2.19 17.00 1.00 12

14 21.00 0.50 15.75 14.18 1.38 3.12 18.75 1.12 12

class 300


1/2 3.75 0.12 1.50 0.90 0.56 0.88 2.62 0.62 4

3/4 4.62 0.12 1.88 1.11 0.62 1.00 3.25 0.75 4

1 4.88 0.12 2.12 1.38 0.69 1.06 3.50 0.75 4

1-1/4 5.25 0.19 2.50 1.72 0.75 1.06 3.88 0.75 4

1-1/2 6.12 0.25 2.75 1.97 0.81 1.19 4.50 0.88 4

2 6.50 0.31 3.31 2.46 0.88 1.31 5.00 0.75 8

2-1/2 7.50 0.31 3.94 2.97 1.00 1.50 5.88 0.88 8

3 8.25 0.38 4.62 3.60 1.12 1.69 6.62 0.88 8

4 10.00 0.44 5.75 4.60 1.25 1.88 7.88 0.88 8

5 11.00 0.44 7.00 5.69 1.38 2.00 9.25 0.88 8

6 12.50 0.50 8.12 6.75 1.44 2.06 10.62 0.88 12

8 15.00 0.50 10.25 8.75 1.62 2.44 13.00 1.00 12

10 17.50 0.50 12.62 10.92 1.88 3.75 15.25 1.12 16

12 20.50 0.50 14.75 12.92 2.00 4.00 17.75 1.25 16

14 23.00 0.50 16.75 14.18 2.12 4.38 20.25 1.25 20


pa g e 1 2 / 1 5

lapped joint flange (asme B16.5)

class 400


1/2 3.75 0.12 1.50 0.90 0.56 0.88 2.62 0.62 4

3/4 4.62 0.12 1.88 1.11 0.62 1.00 3.25 0.75 4

1 4.88 0.12 2.12 1.38 0.69 1.06 3.50 0.75 4

1-1/4 5.25 0.19 2.50 1.72 0.81 1.12 3.88 0.75 4

1-1/2 6.12 0.25 2.75 1.97 0.88 1.25 4.50 0.88 4

2 6.50 0.31 3.31 2.46 1.00 1.44 5.00 0.75 8

2-1/2 7.50 0.31 3.94 2.97 1.12 1.62 5.88 0.88 8

3 8.25 0.38 4.62 3.60 1.25 1.81 6.62 0.88 8

4 10.00 0.44 5.75 4.60 1.38 2.00 7.88 1.00 8

5 11.00 0.44 7.00 5.69 1.50 2.12 9.25 1.00 8

6 12.50 0.50 8.12 6.75 1.62 2.25 10.62 1.00 12

8 15.00 0.50 10.25 8.75 1.88 2.69 13.00 11.12 12

10 17.50 0.50 12.62 10.92 2.12 4.00 15.25 1.25 16

12 20.50 0.50 14.75 12.92 2.25 4.25 17.75 1.38 16

14 23.00 0.50 16.75 14.18 2.38 4.62 20.25 1.38 20

class 600


1/2 3.75 0.12 1.50 0.90 0.56 0.88 2.62 0.62 4

3/4 4.62 0.12 1.88 1.11 0.62 1.00 3.25 0.75 4

1 4.88 0.12 2.12 1.38 0.69 1.06 3.50 0.75 4

1-1/4 5.25 0.19 2.50 1.72 0.81 1.12 3.88 0.75 4

1-1/2 6.12 0.25 2.75 1.97 0.88 1.25 4.50 0.88 4

2 6.50 0.31 3.31 2.46 1.00 1.44 5.00 0.75 8

2-1/2 7.50 0.31 3.94 2.97 1.12 1.62 5.88 0.88 8

3 8.25 0.38 4.62 3.60 1.25 1.81 6.62 0.88 8

4 10.75 0.44 6.00 4.60 1.50 2.12 8.50 1.00 8

5 13.00 0.44 7.44 5.69 1.75 2.38 10.50 1.12 8

6 14.00 0.50 8.75 6.75 1.88 2.62 11.50 1.12 12

8 16.50 0.50 10.75 8.75 2.19 3.00 13.75 1.25 12

10 20.00 0.50 13.50 10.92 2.50 4.38 17.00 1.38 16

12 22.00 0.50 15.75 12.92 2.62 4.62 19.25 1.38 20

14 23.75 0.50 17.00 14.18 2.75 5.00 20.75 1.50 20


pa g e 13 / 1 5

weld neck flange (asme B16.5)

class 150

NPS O R X B A C1 Y B.C.D. D # of Bolt Holes

1/2 3.50 1.38 1.19 0.62 0.84 0.44 1.88 2.38 0.62 4

3/4 3.88 1.69 1.50 0.82 1.05 0.50 2.06 2.75 0.62 4

1 4.25 2.00 1.94 1.05 1.32 0.56 2.19 3.12 0.62 4

1-1/4 4.62 2.50 2.31 1.38 1.66 0.62 2.25 3.50 0.62 4

1-1/2 5.00 2.88 2.56 1.61 1.90 0.69 2.44 3.88 0.62 4

2 6.00 3.62 3.06 2.07 2.38 0.75 2.50 4.75 0.75 4

2-1/2 7.00 4.12 3.56 2.47 2.88 0.88 2.75 5.50 0.75 4

3 7.50 5.00 4.25 3.07 3.50 0.94 2.75 6.00 0.75 4

4 9.00 6.19 5.31 4.03 4.50 0.94 3.00 7.50 0.75 8

5 10.00 7.31 6.44 5.05 5.56 0.94 3.50 8.50 0.88 8

6 11.00 8.50 7.56 6.07 6.63 1.00 3.50 9.50 0.88 8

8 13.50 10.62 9.69 7.98 8.63 1.12 4.00 11.75 0.88 8

10 16.00 12.75 12.00 10.02 10.75 1.19 4.00 14.25 1.00 12

12 19.00 15.00 14.38 12.00 12.75 1.25 4.50 17.00 1.00 12

14 21.00 16.25 15.75 13.25* 14.00 1.38 5.00 18.75 1.12 12

class 300

NPS O R X B A C1 Y B.C.D. D # of Bolt Holes

1/2

3/4

1

1-1/4

1-1/2

2

2-1/2

3

4

5

6

8

10

12

14

3.75

4.62

4.88

5.25

6.12

6.50

7.50

8.25

10.00

11.00

12.50

15.00

17.50

20.50

23.00

1.38

1.69

2.00

2.50

2.88

3.62

4.12

5.00

6.19

7.31

8.50

10.62

12.75

15.00

16.25

1.50

1.88

2.12

2.50

2.75

3.31

3.94

4.62

5.75

7.00

8.12

10.25

12.62

14.75

16.75

0.62

0.82

1.05

1.38

1.61

2.07

2.47

3.07

4.03

5.05

6.07

7.98

10.02

12.00

13.25*

0.84

1.05

1.32

1.66

1.90

2.38

2.88

3.50

4.50

5.56

6.63

8.63

10.75

12.75

14.00

0.56

0.62

0.69

0.75

0.81

0.88

1.00

1.12

1.25

1.38

1.44

1.62

1.88

2.00

2.12

2.06

2.25

2.44

2.56

2.69

2.75

3.00

3.12

3.38

3.88

3.88

4.38

4.62

5.12

5.62

2.62

3.25

3.50

3.88

4.50

5.00

5.88

6.62

7.88

9.25

10.62

13.00

15.25

17.75

20.25

0.62

0.75

0.75

0.75

0.88

0.75

0.88

0.88

0.88

0.88

0.88

1.00

1.12

1.25

1.25

4

4

4

4

4

8

8

8

8

8

12

12

16

16

20


pa g e 1 4 / 1 5

weld neck flange (asme B16.5)

class 400

NPS O R X B A C Y B.C.D. D # of Bolt Holes

1/2 3.75 1.38 1.50 0.84 0.56 2.06 2.62 0.62 4

3/4 4.62 1.69 1.88 1.05 0.62 2.25 3.25 0.75 4

1 4.88 2.00 2.12 1.32 0.69 2.44 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.66 0.81 2.62 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.90 0.88 2.75 4.50 0.88 4

2 6.50 3.62 3.31 2.38 1.00 2.88 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.88 1.12 3.12 5.88 0.88 8

3 8.25 5.00 4.62 3.50 1.25 3.25 6.62 0.88 8

4 10.00 6.19 5.75 4.50 1.38 3.50 7.88 1.00 8

5 11.00 7.31 7.00 5.56 1.50 4.00 9.25 1.00 8

6 12.50 8.50 8.12 6.63 1.62 4.06 10.62 1.00 12

8 15.00 10.62 10.25 8.63 1.88 4.62 13.00 1.12 12

10 17.50 12.75 12.62 10.75 2.12 4.88 15.25 1.25 16

12 20.50 15.00 14.75 12.75 2.25 5.38 17.75 1.38 16

14 23.00 16.25 16.75 14.00 2.38 5.88 20.25 1.38 20

class 600

NPS O R X B A C Y B.C.D. D # of Bolt Holes

1/2 3.75 1.38 1.50 0.84 0.56 2.06 2.62 0.62 4

3/4 4.62 1.69 1.88 1.05 0.62 2.25 3.25 0.75 4

1 4.88 2.00 2.12 1.32 0.69 2.44 3.50 0.75 4

1-1/4 5.25 2.50 2.50 1.66 0.81 2.62 3.88 0.75 4

1-1/2 6.12 2.88 2.75 1.90 0.88 2.75 4.50 0.88 4

2 6.50 3.62 3.31 2.38 1.00 2.88 5.00 0.75 8

2-1/2 7.50 4.12 3.94 2.88 1.12 3.12 5.88 0.88 8

3 8.25 5.00 4.62 3.50 1.25 3.25 6.62 0.88 8

4 10.75 6.19 6.00 4.50 1.50 4.00 8.50 1.00 8

5 13.00 7.31 7.44 5.56 1.75 4.50 10.50 1.12 8

6 14.00 8.50 8.75 6.63 1.88 4.62 11.50 1.12 12

8 16.50 10.62 10.75 8.63 2.19 5.25 13.75 1.25 12

10 20.00 12.75 13.50 10.75 2.50 6.00 17.00 1.38 16

12 22.00 15.00 15.75 12.75 2.62 6.12 19.25 1.37 20

14 23.75 16.25 17.00 14.00 2.75 6.50 20.75 1.50 20


pa g e 1 5 / 1 5

lap joint stub ends (asme B16.9)

NPS Barrel O.D. Long Pattern Short Pattern Radius of Diameter of Lap

Max. Min. Length (F)** *** Length (F)** *** Fillet (R)**** (G)*****

1/2 0.896 0.809 3.00 2.00 0.12 1.38

3/4 1.106 1.019 3.00 2.00 0.12 1.69

1 1.376 1.284 4.00 2.00 0.12 2.00

1-1/4 1.716 1.629 4.00 2.00 0.19 2.50

1-1/2 1.965 1.869 4.00 2.00 0.25 2.88

2 2.456 2.344 6.00 2.50 0.31 3.62

2-1/2 2.966 2.844 6.00 2.50 0.31 4.12

3 3.596 3.469 6.00 2.50 0.38 5.00

4 4.593 4.469 6.00 3.00 0.44 6.19

5 5.683 5.532 8.00 3.00 0.44 7.31

6 6.743 6.594 8.00 3.50 0.50 8.50

8 8.743 8.594 8.00 4.00 0.50 10.62

10 10.913 10.719 10.00 5.00 0.50 12.75

12 12.913 12.719 10.00 6.00 0.50 15.00

14 14.170 13.969 12.00 6.00 0.50 16.25

16 16.180 15.969 12.00 6.00 0.50 18.50

18 18.190 17.969 12.00 6.00 0.50 21.00

20 20.240 19.969 12.00 6.00 0.50 23.00

22 22.240 21.969 12.00 6.00 0.50 25.25

24 24.240 23.969 12.00 6.00 0.50 27.25

Notes:

*All Dimensions are in inches.

** When short pattern stub ends are used with larger flanges in Classes 300 and 600, and with most

sizes in Classes 900 and higher, and when long pattern stub ends are used with larger flanges in classes

1500 and 2500, it may be necessary to increase the length of the stub ends in order to avoid covering the

weld with the flange. Such increases in length shall be a matter of agreement between Manufacturer and

Purchaser.

*** When special facings such as a tongue and groove, male and female, etc., are employed, additional

lap thickness must be provided and such additional thickness shall be in addition to (not included in) the

basic length F.

**** These Dimensions conform to the radius established for lap joint flanges in ASME B16.5.

***** This dimension conforms to standard machined facings shown in ASME B16.5. The back face of the

lap shall be machined to conform to the surface on which it seats. Where ring joint facings are to be ap-

plied, use dimension K as given in ASME B16.5.

****** The lap thickness T shall not be less than nominal pipe wall thickness.

******* Gasket face finish shall be in accordance with ASME B16.5 for raised face flanges.

liner

A liner of interlocked hose can be installed inside of a standard corrugated assembly. This liner protects the corrugated hose from corrosive materials and reduces turbulence by keeping the hose separated from the media.

liner guard (bend restrictor)

This application has either interlocked or squarelocked hose on the outside of the corrugated assembly to protect against external abrasion, corrosive medias, or physical impacts. This design will increase the bend radius so that there is less flex in the hose.

Hose Accessory Configurations

pa g e 0 1 / 0 4

jacketed cover assemblies

This application has a second layer of hose around the first, which is connected at its ends by spe-cialty fittings. This design is useful for high or cryogenic temperatures where the media does not contact the outer layer. The area between the two hoses can circulate media, like steam, to compen-sate for extreme temperatures.

tracer assemblies

Tracer applications are similar to Jacked assemblies, but the media is run through a U-shaped hose so that the longer travel allows for more temperature correction.


pa g e 0 2 / 0 4

nitrogen loading hose


pa g e 03 / 0 4

steel cable

fabric

co loading hose


pa g e 0 4 / 0 4

steel cable

fabric

steel cable

2

Classification of Motions

random motion

Such Motion is non-predictable and occurs from the manual handling of a hose assembly. Care must be taken to prevent over-bending of the hose and to avoid external abrasion of the wire braid. An armor covering of interlocked hose provides protection against these abuses.

axial motion

This Type of motion occurs when there is extension or compression of the hose along its longitudinal axis. This class of motion is restricted to unbraided corrugated hose only and is limited to small move-ments and short lengths of hose.

angular motion

This type of motion occurs when one end of a hose assembly is deflected in a simple bend with theends not remaining parallel.

Formula: L = [(πRØ)/180] + (2S)

Where:

L = Live Hose Length (inches)R = Minimum Centerline Bend Radius for constant flexing (inches)

Ø = Angular Deflection (degrees)S = Outside Diameter of hoseπ = 3.14159

pa g e 0 1 / 0 2

offset motion

Offset motion occurs when one end of the hose assem-bly is deflected in a plane perpendicular to the longitu-dinal axis with the ends remaining parallel.

USE THIS APPROPRIATE FORMULA

Formula: L = (20RT)1/2

Lp = ( L2 – T2)1/2

Where:

L = Live Hose Length (inches)Lp = Projected Live Hose Length (inches)R = Minimum Centerline Bend Radius for constant flexing (inches) T = Offset Motion to one side of Centerline (inches)

Note 1 : When the offset motion occurs to both sides of the hose centerline, use total travel in the formula; i.e. 2 times “T”.

Note 2 : The offset distance “T” for constant flexingshould never exceed 25 percent of the centerlinebend radius “R”.

Note 3 : If the difference between “L” and “Lp” is sig-nificant, exercise care at installation to avoid stress on hose and braid at the maximum offset distance.

traveling loops

In a piping system where axial movement must be accommodated or where the magnitude of the motion is in excess of the limits of an offset movement, the traveling loop configuration offers an

Classification of Motions

ideal solution. In traveling loops, the centerline of a hose assembly is bent in a circular arc. Traveling loops accommodate movement in one of two ways. A constant radius traveling loop accommodates motion by varying the length of the arms of the assembly while the radius remains constant. A variable radius traveling loop accommodates motion by varying the bend radius of the hose assembly. Both types of traveling loops can be installed to absorb either horizontal or vertical movement. The constant radius traveling loop provides for greater movement while the variable radius traveling loop requires less installation space.

Formulas for Constant Radius Traveling Loop: L = (4R) + (T/2)H = (1.43R) + (T/2)

Vertical Travel

Horizontal Travel

pa g e 0 2 / 0 2

Formulas for Variable Radius Traveling Loop:

L = (4R) + (1.57T)H = (1.43R) + (0.79T)

Where:

L = Live Hose Length (inches)R = Minimum Centerline Bend Radius for constant flexing (inches)T = Total Travel (inches)H = Hang Length of the loop (inches)

Horizontal Travel

Vertical Travel

constant radius traveling loop

variable radius traveling loop

Assembly Installation

avoid torque

Do not twist the hose assembly during installation when aligning the boltholes in a flange or in making up pipe threads. The utilization of lap joint flanges or pipe unions will minimize this condition. It is recommended that two wrenches be used in making the union con-nection; one to prevent the hose from twisting and the other to tighten the coupling.

preventing out-of-plane flexing in an installation

Always install the hose so that the flexing takes place in only one plane. This plane must be the plane in which the bending occurs.

pa g e 0 1 / 0 6

avoid over-bending

The repetitive bending of a hose to a radius smaller than the radius listed in the specification tables for corrugated hose will result in premature hose failure. Always provide sufficient length to prevent over bending and to eliminate strain on the hose.

Our corrugated hose is engineered to provide maximum service life when properly installed.

Improper installation, incorrect flexing or careless handling in an application will reduce the effective service

life of the hose and cause premature failure of an assembly. The following installation and handling

precautions should be observed to achieve optimum performance from your corrugated hose assemblies.

lateral offset installation

traveling loop installation

Assembly Installation pa g e 0 2 / 0 6

use common sense in determining the installation configuration.

Utilize sound geometric configurations that avoid sharp bends, especially near the end fittings of the assem-bly. When installing the assembly in a horizontal loop, provide support for the arms to prevent the hose from sagging.

lateral offset installationtraveling loop installation


A piping system which utilizes metal hose to absorb movement must be properly anchored and/or guided.

Always support the piping to prevent excessive weight from compressing the hose and relaxing the braid tension.

pa g e 03 / 0 6

pressure drop data and flow velocity information

pressure drop data graph

Pressure drop in a piping system is a result of resistance to flow, which is influenced by such factors as media velocity, pipe size, and the length of the piping system. Because of its convoluted profile, corrugated metal hose has a greater resistance to flow than smooth wall pipe. The graph shows the approximate pressure loss at various rates of water flow through straight sections of corrugated metal hose. For example, to determine the pressure loss through a 5 foot length of 2” id hose conveying 100 gallons of water per minute, locate the flow rate on the horizontal scale and project vertically to the intersection with the 2” id hose line. Then go horizontally to read the pressure loss on the vertical scale. Multiply the 5 foot hose length times the 0.9 psi loss per foot to determine the total pressure loss of 4.5 psi.

avoid careless handling of the hose assembly

Always lift or carry metal hose to prevent abrasion damage particularly to braided corrugated hose. Store metal hose assemblies away from areas where it can be subjected to spillage, corrosive fumes or spray, weld splatter, etc.


flow velocity consideration

The flow velocity in corrugated metal hose should never exceed 150 ft./sec. for gas or 75 ft./sec. for liquids. When a hose is installed in a bent condition, the flow values should be reduced proportionally to the degree of the bend. Where the flow velocity exceeds these rates, an interlocked metal hose liner is recommended.

selection criteria

The selection of flexible metal hose for a particular ap-plication is influenced by six primary considerations:

1 Pressure2 Temperature3 Media4 Motion5 Size6 End Fittings

To make the best choice for a specific application, consider all the relevant operating factors against the properties of the various types of flexible metal hose.

pressure

The nominal pressure rating of flexible metal hose varies according to type, material, and size. Specific pressure ratings for each type of flexible metal hose are found in each section of the catalogue. Under actual working conditions, pressure is affected by many other factors such as temperature, pulsation conditions, and bending stresses. The “Guide To Specification Table Headings” in the Corrugated Metal Hose Sec-tion explains how such factors specifically affect the properties of corrugated metal hose. Also, review the “Temperature Adjustment Factor Table” for adjusting pressure ratings at operating temperatures higher than 70˚F.

pa g e 0 4 / 0 6

temperature

The physical properties of any material varies with temperature. Limits for operating temperature are af-fected by the working pressure, the type of media being conveyed and the nature of the application. By careful selection of material, it is possible to provide flexible metal hose for a wide range of operating temperatures. The choice of hose type, metal alloy, end fitting, and method of fitting attachment determine the temperature limit.

motion

Flexible metal hose is generally used in four types of applications:

1 To correct problems of misalignment2 To provide flexibility in manual handing operations3 To compensate for regular or constant movement4 To absorb vibration

In all types, careful hose selection, design of the as-sembly, and installation are important for optimal service life. The flexibility of a hose is determined by its mechanical design and the inherent flexibility of its material.

media

The type of media being conveyed is an important consideration in the selection process. Metal hose is subjected to corrosion by both the material flowing through it and the outside environment. For almost all applications, a metal hose can be selected that is resistant to the intended media. Since metal hose is a thin-walled product, it will not have the same total life as heavier walled tube or pipe of the same material. The “Corrosion Evaluation Data” table pro-vides a guide to material selection.


end fittings

The use of flexible metal hose is complimented by the extensive range of end fittings that are available. Such end fittings may be male or female pipe threads, unions, flanges, flared tube fittings or other specially designed connectors. End fittings are at-tached by welding, silver brazing, soldering, and oc-casionally by mechanical means, depending on the type of hose and the alloy. For further detail on the appro-priate type of end fitting please consult your fabricat-ing distributor.

size

The size of flexible metal hose is specified by the nomi-nal diameter. The existing piping will normally dictate the size of the metal hose for a particular application. However, flow rate, velocity, and pressure drop consid-erations may also influence the selection of the hose size.

maximum service temperatures

The component of a metal hose assembly with the lowest temperature rating as shown in this chart determines the maximum service temperature of that assembly.

pa g e 0 5 / 0 6

temperature adjustment factors

In general, the strength and therefore the pressure rating of metal hose decreases as the temperature in-creases. Thus, as the operating temperature of a metal hose assembly increases, the maximum allowable work-ing pressure of the assembly decreases. The pressure rating shown in the specifications chart for corrugated and interlocked hose are valid at 70˚F. Elevated service temperatures will decrease these pressure ratings by the factors shown in the following chart. What also must be considered is the maximum working temperature of the end fittings, of the hose and their method of attachment.

For Example :

To calculate the maximum working pressure for ¾” ID single braided stainless steel corrugated hose at 800 °f.

From the corrugated metal hose specification table, the maximum working pressure at 70°f is 775 psig. Multiply 775 psig by 0.66. The maximum working pressure at 800°f is 511 psig.

Correction Factors Chart

Apply to pressure rating for elevated temperatures

°f 304L 316L 321 Steel Monel

70 1.00 1.00 1.00 1.00 1.00100 1.00 1.00 1.00 0.96 0.90200 1.00 1.00 1.00 0.97 0.90300 1.00 1.00 1.00 0.93 0.83400 0.93 0.93 0.93 0.87 0.79500 0.88 0.86 0.86 0.81 0.73600 0.83 0.80 0.82 0.74 0.72650 0.82 0.79 0.80 -- --700 0.88 0.86 0.79 0.66 0.71750 0.79 0.75 0.78 -- --800 0.77 0.74 0.77 0.52 0.70850 0.76 0.72 0.76 -- --900 0.71 0.70 0.76 0.50 --950 0.59 0.68 0.75 -- --1000 0.46 0.67 0.69 -- --1050 0.37 0.64 0.48 -- --1100 0.30 0.61 0.34 -- --1150 0.23 0.52 0.25 -- --1200 0.19 0.38 0.18 -- --1250 0.15 0.28 0.13 -- --1300 0.12 0.20 0.08 -- --


do

> Follow any printed instructions included with the flexible connector.

> Follow industry – recommended practices and use care in handling and installing flexible connectors.

> Install flexible connectors so that the bend is as close to the center of the connector as possible.

> Observe the minimum bend radius as specified by the connector manufacture.

> “Premade” threaded connections by hand, unmake and then make permanent.

> Use a flexible connector of proper length to suit the installation.

> Only wrench on the fitting hex flats as provided.

> Design the installation to allow for ground move ment after installation, such as settling or frost heave.

> Install the proper length connector to allow a 2” straight run of hose at each fitting.

> Use pipe wrenches on both mating hexes to avoid twisting the hose.

> Keep hose free from all objects and debris.

> Handle and store connectors carefully prior to installation.

> Check for leaks before covering the installation.

> Install in such a manner that the connector can be removed.

> Make sure pressure rating of connector is not exceeded.

pa g e 0 6 / 0 6

don’t

> Wrench and flexible connector on the hose or collar.

> Twist hose assemblies during installation or when aligning the boltholes in a flange or when making up pipe threads.

> “Pre-flex” a flexible connector to limber it up. Over- bending could cause damage and result in leakage.

> Over-bend a flexible connector. A 45 - 90 bend should be sufficient to install any flexible connector.

> Install a flexible connector with the bend next to the end fittings. This could cause damage and result in leakage.

> Lay the flexible connector on rocks or objects which could puncture the hose and cause leakage.

> Restrict flexibility by allowing connector to come into contact with other components or equipment during installation.

> Attempt to stretch or compress a flexible connector to fit an installation.

installation tips

Interlocked Metal Hose pa g e 0 1 / 1 0

hose fundamentals

Our interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes.

Interlocked hose is manufactured by helically wind-ing preformed metal strips over a sizing mandrel and folding together the adjacent edges forming the interlocked convolutions. A packing material may be inserted into a preformed groove within the interlock to make the hose pressure tight or to minimize leak-age. This Packing forms a continuous gasket seal throughout the entire length of the hose.

Flexibility is achieved through the sliding action which is provided by the slip-space within each in-terlocked convolution. The limits of axial elongation or compression are established when the convolu-tions are all fully opened or are all fully closed. Similarly, the minimum bend radius is achieved when the convolutions on the outside of the bend are fully opened, and those on the inside of the bend are fully closed. Considerable force is required to exceed these limitations. However, if the hose is forced beyond these limits, it will be permanently deformed.

Certain styles of non-pressure hose are designed to minimize metal-to-metal contact within the inter-locked convolutions, and are therefore very flex-ible. Conversely, pressure hose is considerably less flexible since the forces necessary to compress the packing material produce a greater resistance to the sliding action.

guide to interlocked hose specifications tables

Nominal Diameter

This column lists the nominal diameters of the hose expressed in inches.

Strip Metal Thickness

This column indicates the thickness of the strip metal from which the hose is manufactured.

Weight

This column specifies the approximate weight per foot of hose and is given in pounds per foot.

Burst and Working Pressures

This data is applicable only to M-100 pressure hose. Review the M-100 pressure hose specification section for definitions of these terms.

Bend Radius

Identified as Minimum Centerline Bend Radius (for M-100 pressure hose), this column specifies the bend limitations of the particular hose. The follow-ing drawings and formulas define these terms.

m-100 pressure hose (cross section)


description

Our M-100 pressure hose is a high quality, heavy duty, fully interlocked metal hose designed to withstand the abuse of many industrial applications. The inclusion of a quality packing into a specially formed groove during manufacturing serves as a continuous gasket to make the hose pressure tight. Such media as air and non-searching fluids can be conveyed by M-100 hose at moderate pressure and temperatures. For technical data refer to the appro-priate specification tables.

end fittings

The high temperatures encountered in welding pipe and flanges to M-100 hose destroys the packing within the convolutions adjacent to the weld area. “Titepak” and “Packed & Welded” fittings were developed to seal this damaged section by providing a box and gland arrangement for the application of corrective packing after the fitting has been welded onto the hose. These fittings are available as rigid or floating flanges and as beveled, and NPT threaded pipe ends.

specifications

M-100 pressure hose is produced in type 304 stain-less steel. I.D. sizes range from ¾” through 28”. In addition to the column headings defined in the “Guide to Interlocked Hose Specification Tables,” the following terms are included in the specifica-tions table for M-100 pressure hose.

Nominal Burst Pressure is the PSIG pressure at which the hose can be expected to rupture. This rating is predicated upon the hose being installed straight and motionless, and subjected to internal hydrostatic pressure at 70 °f.

Maximum Working Pressure is the PSIG pressure at 70 °f to which the hose should be subjected while operating under moderate bending, motion, and flow conditions. This rating represents the applica-tion of 3 to 1 safety factors against the nominal burst pressure. If more sever operating conditions are anticipated, the use of a 4 to 1 or a 5 to 1 safety fac-tor is recommended.

Elevated operating temperatures require the ap-plication of a temperature adjustment factor to the maximum working pressure at 70 °f. Refer to the “Temperature Adjustment Factor Table” in the “De-sign Considerations” section of this catalogue.

applications

M-100 pressure hose is an ideally suited hose for metal expansion joints, boiler relief valve sealing, pulverized coal cyclone feeders, boiler draft sys-tems, and BOF lance hose assemblies. Addition-ally, M-100 pressure can be used in applications involving diesel exhaust, tank car unloading, barge unloading, fuel oil transfer, oven exhaust, suction lines, and air intake lines.

m-100 pressure hose

m-100 pressure hose (cross section)

Interlocked Metal Hose pa g e 03 / 1 0

size nominal od maximum working nominal burst minimum centerline strip thickness weight pressure (psig) pressure (psig) bend radius per foot

1/2 0.65 500 1500 6 0.015 0.43/4 0.93 495 1455 7 0.018 0.51 1.18 365 1095 10 0.018 0.61 1/2 1.69 240 720 14 0.018 0.92 2.19 190 540 19 0.018 1.22 1/2 2.69 140 420 22 0.018 1.53 3.19 120 360 27 0.018 1.74 4.35 175 525 36 0.035 4.65 5.35 200 600 46 0.050 5.66 6.35 165 495 48 0.050 6.78 8.60 150 450 64 0.060 16.310 10.60 120 360 90 0.060 20.212 12.70 115 345 114 0.070 24.114 14.70 100 300 132 0.070 31.316 16.70 97 260 150 0.070 35.718 18.70 77 230 169 0.070 40.020 20.70 70 210 196 0.070 44.422 22.70 64 192 204 0.070 48.724 24.70 56 169 224 0.070 53.126 26.70 53 159 240 0.070 57.528 28.70 50 150 260 0.070 61.8

m-100 pressure hose

m-100 pressure hose

We manufacture M-100 hose assemblies with the following fittings:

titepak rigid flange trf titepak weld end twm female npt end hf

titepak floating flange tff male npt end hm

description

Our two distinct types of interlocked conveyer hoses designed especially for the transfer of dry bulk mate-rials.

Standard Conveyor Hose is a serviceable, unlined, medium weight hose featuring a fully packed inter-locked construction.

Smooth Bore Conveyor Hose features rugged in-terlocked construction plus an integral metal strip lining. This lining provides Smooth Bore conveyor hose with a smooth bore that minimizes impaction and reduces turbulence for free flowing transmis-sion of materials. Smooth Bore conveyor hose can also be produced with the inclusion of packings in the interlocks to reduce air loss and for low pressure requirements. end fittings

A wide range of end fittings is available for our conveyor hoses. These end fittings can be plain, threaded or grooved nipples, pipe ends, plate flanges, either rigid or floating, and quick discount couplings. Attachment can be made by welding, brazing, or by high strength adhesives.

specifications

Standard conveyor hose is produced in stainless steel, galvanized steel, and aluminum in a range of sizes from 3” to 20” inside diameters. Smooth bore

conveyor hose is produced in a size range from 1 ½” to 20” inside diameter. Because Smooth Bore conveyor hose is manufactured using two separate pieces of metal strip, the complete hose can be com-posed of two different types of material.

TLGG is made of all galvanized steel for the best economy. TLGS is a galvanized steel hose with a stainless steel lining for maximum resistance to abrasion. TLAS is a light weight aluminum hose with an abrasion resisting stainless steel lining. TLSS is an all stainless steel construction for maximum cor-rosion and abrasion resistance.

Smooth Bore conveyor hose is a uni-directional flow hose; make sure that the inlet and outlet end con-nections are specified. The tables on the following page give complete technical information about our conveyor hoses.

applications

Our conveyor hose are excellent for applications involving the pneumatic transmission of flake or palletized plastics, grains, coal dust, slag, and other dry granular or abrasive materials. It can be used for the loading or unloading of shipping, barges, containers, silos, elevators, highway, and rail cars. Standard conveyor hose can also be used for air intake for diesel superchargers, exhausting gases from ovens and furnaces, and boiler draft system expansion joints.

conveyor hose


standard conveyor hose (cross section)

smooth bore conveyor hose (cross section)


nominal id nominal od minimum coiling wt/ft diameter cs/ss

3 3.25 30 2.3

4 4.25 40 3.1

5 5.25 48 3.8

6 6.25 58 4.8

8 8.25 67 6.0

10 10.25 96 7.52

12 12.25 114 9.0

14 14.25 133 11.0

16 16.25 152 12.0

18 18.25 170 14.5

20 20.25 190 17.0

standard conveyor hose

nominal id light weight tlss standard weight tlss heavy weight tlss 0.015”armour/0.015”liner o.o18”armour/0.015”liner o.24”armour/0.015”liner

minimum coiling wt/ft minimum coiling wt/ft minimum coiling wt/ft diameter diameter diameter

1 1/2 18 1.4 20 1.6

2 19 1.9 21 2.2

2 1/2 22 2.3 24 2.6

3 24 2.8 26 3.1 29 3.8

4 32 3.6 35 4.1 39 5.0

5 47 4.5 50 5.1 57 6.1

6 52 5.4 56 6.1 63 7.3

8 91 8.1 98 9.4

10 111 11.0

12 132 13.0

14 154 15.5

16 176 17.5

18 198 20.5

20 220 23.0

m-100 pressure hose

packing material max. temperature max. pressure vacuum

Cotton 300 F 15 PSIG 15 in. Mercury, Max.

Elastomer 180 F 20 PSIG 20 in. Mercury, Max.

Silicone 500 F 20 PSIG 20 in. Mercury, Max.

Standard Smooth Bore Conveyor Hose is supplied unpacked. If there is a pressure requirement consult the table below. This data is also applicable to Standard Conveyor Hose.

description

Our exhaust hoses are produced in a wide range of ID sizes, metals, and weights. This range is avail-able to provide the right hose for the application at the most economical cost. Interlocked exhaust hose utilizes a fully interlocked construction for strength and durability while allowing the hose to have excel-lent flexing characteristics. The normal configura-tion of exhaust hose is unpacked and fully extended. In order to minimize leakage, however, exhaust hose can be supplied packed upon request.

end fittings

Standard pipe couplings, nipples, and fixed or float-ing flanges can be attached to exhaust hose. Any special type of fitting can be adapted to fit this hose. Attachment can be by welding, brazing, or with ad-hesives. Additionally, hose clamps and automotive muffler clamps can be used.

specifications

Our exhaust hoses are produced in galvanized steel and stainless steel as standard but are also avail-able in aluminum and bronze as specials. The strip thickness and thus the hose weight can be selected to match the application depending upon the degree of rough handling and the abrasive conditions of the service. We have three different weights of exhaust hose as indicated in the following tables.

The size range of exhaust hose is from ½” to 8” inside diameter. For sizes larger than 8” ID, use the standard conveyor hose (up to 20” ID).

applications

Some typical uses of exhaust hose are: engine ex-haust and vacuum and collection service, conveying, ventilating lines, and protective casing for cable and tubing.

interlocked exhaust hose


interlocked exhaust hose (cross section)

series weight designation strip thickness

IE30 Light 0.010” to 0.012”

IE50 Standard 0.018” to 0.020”

IE65 Heavy 0.024” to 0.026”


nominal diameters minimum coiling wt/ft diameterinside outside

1/2 0.61 6 0.23

3/4 0.86 7 0.32

1 1.11 9 0.41

1 1/4 1.36 11 0.44

1 1/2 1.61 13 0.54

1 3/4 1.86 15 0.63

2 2.11 17 0.72

2 1/4 2.36 19 0.80

2 1/2 2.61 21 0.89

2 3/4 2.86 23 0.96

3 3.11 26 1.06

3 1/2 3.61 30 1.24

4 4.11 34 1.41

5 5.11 42 1.76

6 6.11 50 2.11

7 7.11 58 2.46

8 8.11 66 2.8

ie30 interlocked exhaust hose

Strip Thickness 0.010/0.012”






2 2.23 24 1.55

2 1/4 2.48 27 1.74

2 1/2 2.73 30 1.92

2 3/4 2.91 33 2.11

3 3.23 35 2.29

3 1/2 3.73 41 2.66

4 4.23 47 3.02

5 5.23 58 3.76

6 6.23 69 4.49

7 7.23 80 5.23

8 8.23 91 5.96


1 1/2 1.66 17 0.86

1 3/4 1.91 19 1.00

2 2.16 22 1.13

2 1/4 2.41 25 1.27

2 1/2 2.66 27 1.40

2 3/4 2.91 29 1.54

3 3.16 32 1.67

3 1/2 3.66 38 1.95

4 4.16 43 2.22

5 5.16 53 2.76

6 6.16 63 3.30

7 7.16 74 3.85

8 8.16 84 4.39

notes

(1) Tabulated weights apply to stainless steel and carbon steel hose. Multiply 0.35 to obtain weight per foot of aluminum hose.

(2) Intermediate sizes, alloys, and flexibility characteristics are all subjected to quotation from the factory.

description

Square locked hose is an extremely flexible type of metal hose. The square locked construction of the hose enables it to conform to a very small bend radius. Square locked hose can be produced with or without packing. While the hose is not pressure tight, packed square locked hose will con-tain liquids at gravity flow and can be considered moisture resistant.

end fittings

This type of interlocked hose is normally furnished without end fittings.

specifications

Square locked hose is manufactured in galvanized steel and stainless steel in a size range from 5/32” to 3/4” inside diameter

applications

Applications for square locked hose include wir-ing conduit for electrical and electronic equipment, electronic shielding tubing, protective casing, and flexible spouts.

square locked hose


nominal min. coiling strip wt/ft diameters diameter thickness

inside outside unpacked packed

7/32 0.310 2.125 3.250 0.010 0.045

5/16 0.420 2.375 4.000 0.010 0.060

3/8 0.500 2.500 4.250 0.012 0.080

1/2 0.630 2.750 4.750 0.012 0.130

5/8 0.750 3.500 5.500 0.012 0.160

3/4 0.940 7.500 9.000 0.020 0.250

square locked hose (cross section)unpacked

square locked hose (cross section)packed

Conduit is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. Standard Conduit is made from 304 stainless steel. Other metals are avail-able. Conduit is different from the Square Locked Hose shown on the previous page in that it is:

(1) Highly flexible (2) Floppy (3) Clean for oil free use

squarelok style (sl)

SquareLok tubing is produced from a continuous metal strip, and is held in position by locking one leg of one profile over the leg of the adjacent profile.

flexible conduit


size inside outside coiling weight load breaking load part number diameter diameter diameter

1/16” 0.071” 0.118” 1.80” 0.010lb/ft 50lb SL-SS-001

1.6mm 1.8mm 3.0mm 46.00mm 0.015kg/m 23kg 3280ft/reel

1/8” 0.125” 0.200” 1.50” 0.020lb/ft 66lbs SL-SS-002

3mm 3.18mm 5.1mm 38.00mm 0.030kg/m 30kg 3000ft/reel

5/32” 0.156” 0.235” 1.75” 0.033lb/ft 175lb SL-SS-0025


3/16” 0.188” 0.266” 1.75” 0.036lb/ft 185lb SL-SS-003


7/32” 0.218” 0.303” 1.75” 0.042lb/ft 210lb SL-SS-0035


1/4” 0.250” 0.329” 2.00” 0.044lb/ft 175lb SL-SS-004


9/32” 0.282” 0.375” 2.00” 0.050lb/ft 220lb SL-SS-0045


5/16” 0.313” 0.410” 2.00” 0.065lb/ft 220lb SL-SS-005


3/8” 0.375” 0.500” 2.00” 0.076lb/ft 250lb SL-SS-006


interlok style (fi)

InterLok metal strip and the edges of the strip are completely interlocked with each other. This offers in-creased crush protection, and higher axial strength.

size inside outside coiling weight load breaking load part number diameter diameter diameter

3/16” 0.188” 0.266” 2.000” 0.040lb/ft 210lb FI-SS-003


1/4” 0.250” 0.329” 2.000” 0.050lb/ft 270lbs FI-SS-004



copper capillary tubing technical data

Our manufactured Copper Capillary Tubing for use by manufactures of equipment for:

• Process & Control Instrumentation• Measuring & Control Devices• Temperature Measurement• Recording Instruments

Capillary Tubing is made with the following construction:

Inner Tube Alloy C122 Seamless Copper in various ID and OD combinations

Braid Braid is available in single or double layers of Alloy C102 Copper

Finish Bright Annealed

Temper Soft

Capillary Tubing can be made using many different constructions. If this is a product that you use please send us a copy of your specification or print and a sample. We can offer prompt quotations.

Corrosion Evaluation Data pa g e 0 1 / 0 9

This information may be used as a guide for the selection of flexible metal hose and of fitting material suitable

for conveying the substances listed. However, this data should not be construed as advice to use or not use

without further testing or investigation since variations in service conditions can influence resistance to cor-

rosion. The corrosion resistance of tin-lead solder, brass brazing, and silver brazing alloys used to attach end

fittings to metal hose may be considered equal to bronze in the table. Joints produced by welding end fittings to

steel, stainless steel, and monel hose may be considered equivalent to the corrosion resistance of the compo-

nent parts.

interpretation of corrosion data

Class 1 Resistant Less than 0.00035 inch penetration per month

Class 2 Partially Resistant Between 0.00035 to 0.0035 inch penetration per month

Class 3 Non-Resistant Greater than 0.0035 inch penetration per month

* Subject to decomposition (forming HCI) in presence of moisture.** Subject to pitting at air line or when allowed to dry.*** Subject to attach in presence of H2SO4.

chemical temp 304 s 316l carbon bronze monel

°f 321 ss steel

Acetic Acid 5% - 20% Agitated or Aerated 70 1 1 3 3 2 50% 70 1 1 3 3 3 50% - 80% Boiling 3 2 3 3 3 80% 70 1 1 3 3 1 100% 70 1 1 3 3 1 100% Boiling 3 2 3 3 2 100% @ 150 lbs 400 3 3 3 3 2Acetic Anhydride 70 1 1 3 3 2 Boiling 1 1 3 3 2Acetic Acid Vapors, 30% Hot 3 2 3 3 3 100% Hot 3 3 3 3 2Acetone Boiling 1 1 3 1 1Acetyl Chloride Cold 2 2 3 2 1 Boiling 2 2 3 2 3Acetylene Concentrated 70 1 1 1 3 1 Commercially Pure 70 1 1 1 3 1Acid Salt Mixture: 10% H7SO4Sp, G, 1.07 + 10% CuSO45 H20 Boiling 1 1 3 3 3Alcohol, Ethyl, 70% & Boiling 70 1 1 1 1 1Alcohol, Methyl 70 1 1 1 1 1 150 3** 2 3 1 1Aluminum, Molten 1400 3 3 3 3 3Aluminum Acetate, Saturated 70 1 1 3 3 1 Boiling 1 1 3 3 1Aluminum Chloride 10% Quiescent 70 3 3 3 3 2 25% Quiescent 70 1 1 3 3 2Aluminum Flouride 70 3 3 3 3 2Aluminum Hydroxide, Saturated 70 1** 1 1** 1 1


chemical temp 304 s 316l carbon bronze monel

°f 321 ss steel

Aluminum Sulphate, 5% 150 1** 1 3 3 1

10% 70 1** 1 3 3 1

10% Boiling 2** 1 3 3 1

Saturated 70 1** 1 3 3 1

Saturated Boiling 2** 1 3 3 1

Aluminum Potassium Sulphate

(Alum) 2% - 10% 70 1 1 3 2 2

10% Boiling 2 1 3 3 2

Saturated Boiling 3 2 3 3 2

Ammonia (Anhydrous)

All Concentration 70 1 1 1 1 1

Gas Hot 3 3 3 3 --

Ammonia Liquor 70 1 1 3 3 3

Boiling 1 1 3 3 3

Ammonium Bicarbonate 70 1 1 3 3 2

Hot 1 1 3 3 2

Ammonium Bromide 70 2 1 3 3 2

Ammonium Carbonate 1% & 5% 70 1 1 1 3 3

Ammonium Chloride 1% 70 1 1 2 3 1

10% Boiling 1** 1** -- 3 2

28% Boiling 2** 1** -- 3 2

50% Boiling 2** 1** -- 3 2

Ammonium Hydroxide

All Concentrations 70 1 1 2 3 3

Ammonium Monophospate 70 1 1 2 3 2

Ammonium Nitrate

All Concentrate Agitated 70 1 1 3 3 2

All Concentrate Aerated 70 1 1 3 3 2

All Concentrate Saturated Boiling 1 1 3 3 2

Ammonium Oxalate 5% 70 1 1 2 3 --

Ammonium Perchlorate 10% Boiling 1 1 2 3 --

Ammonium Persulphate 5% 70 1 1 -- 3 3

Ammonium Phoshate 5% 70 1 1 2 3 3

Ammonium Sulphate

1% Aerated or Agitated 70 1 1 3 3 2

Ammonium Sulphate

5% Aerated & Agitated 70 1 1 3 3 2

10% Saturated Boiling 2** 1** 3 3 2

Ammonium Sulphite 70 1 1 3 3 3

Boiling 1 1 3 3 3

Amyl Acetate Concentrate 70 1 1 2 1 1

Amyl Chloride 70 1 1 3 2 2

Aniline 3% 70 1 1 2 3 2

Concentrated Crude 70 1 1 1 3 2

Aniline Hydrochloride 70 3 3 -- 3 3

Antimony Trichloride 70 3 3 3 3 3

Barium Carbonate 70 1 2 1 2 --

Barium Chloride 5% & Saturated 70 1 1 3 2 2

Barium Hydroxide

Aqueous Solution Hot 1 1 2 -- --

Corrosion Evaluation Data pa g e 03 / 0 9

chemical temp 304 ss 316l carbon bronze monel

°f 321 ss steel

Barium Nitrate

Aqueous Solution Hot 1 1 2 -- --

Barium Sulphate

(BarytesĐBlanc Fixe) 70 1 1 -- 1 2

Barium Sulfide

Saturated Solution 70 1 1 3 3 --

Benzene (Benzol) 70 or Hot 70 1 1 2 1 2

Benzoic Acid 70 1 1 1 1 --

Blood (Meat Juices) Cold 1** 1 3 -- 2

Borax 5% Hot & Cold 1 1 -- -- --

Boric Acid

5% Solution 70 - Hot 1 1 3 1 2

5% Solution Boiling 1 1** 3 1 2

Saturated Solution 70 1** 1** 3 2 2

Saturated Solution Boiling 1** 1** 3 3 2

Bromine, Bromine Water 70 3 3 3 3 3

Buttermilk 70 1 1 3 3 2

Butyl Acetate 1 1 2 -- 2

Butyric Acid 5% 70 - 150 1 1 3 2 2

Aqueous Soln. Sp. G. .964 Boiling 1 1 3 2 2

Calcium Carbonate 70 1 1 1 -- 1

Calcium Chlorate

Dilute Solution 70 - Hot 1 1 2 -- 2

Calcium Chloride

Dilute or Concen. Solution 70 2** 1** 3 2 3

Calcium Chlorohypochlorite

(Bleaching Powder) 1% 70 3 3 3 2 3

5% 70 3 3 3 2 3

Calcium Hypochlorite, 2% 70 2** 1** 3 2 3

Calcium Hydroxide, 10% – 20% Boiling 1 1 3 1 1

Calcium Sulphate, Saturated 70 1 1 3 1 2

Carbonic Acid Saturated Soln. 70 1 1 3 1 3

Carbolic Acid C.P. 70 1 1 3 2 1

Boiling 1 1 3 2 1

Carbonated Water 1 1 3 2 3

Carbon Bisulfide 70 1 1 2 2 2

Carbon Monoxide Gas 1400 1 1 1 3 1

Carbon Tetrachloride

C.P. 70 1 1 2 1 1

Dry C.P. Boiling 1 1 2 1 2

Commercial + 1% Water 3** 3 3 2 2

Carnallite-Cold Saturated Soln.

KCIMgCl<sub)26H2O Boiling 3 1** -- -- --

Cellulose 1 1 -- -- 1

Chloracetic Acid 70 3 3 3 2 2

Chlorbenzol Conc. Pure Dry 70 1 1 2 2 2

Chloric Acid 70 3 3 3 3 3

Chlorine Gas (Dry) 70 3 2 2 1 2

(Moist) 70 3 3 3 3 3

Chlorinater Water, Saturated 3** 2** 3



°f 321 ss steel

Chloroform 70 1 1 1 1 1

Chromic Acid

5% C.P. 70 1 1 3 3 3

10% 70 3 2 3 3 3

10% C.P. Boiling 3 2 3 3 3

50% C.P. 70 3 2 3 3 3

50% C.P. Boiling 3 3 3 3 3

Comm 50% (Cont. SO3) 70 3 3 3 3 3

Comm 50% (Cont. SO3) Boiling 3 3 3 3 3

Chromium Plating Bath 70 1 1 2 -- 3

Citric Acid, 5% Still 70 - 150 1 1 3 1 2

15% Still 70 1 1 3 2 2

15% or Concentrated Boiling 2 1 3 2 3

Coffee Boiling 1 1 3 1 1

Copper Acetate (Sat. Sol.) 70 1 1 3 -- 2

Copper Carbonate (Sat. Sol.)

In 50% NH4OH 1 1 -- 3 --

Copper Chloride, 1% Agitated 70 2** 1** 3 3 3

1% Agitated 158 3 3 3 3 3

1% Aerated 70 2** 1** 3 3 3

5% Agitated 70 3** 2** 3 3 3

5% Aerated 70 3** 3** 3 3 3

Copper Cyanide (Sat. Sol.) Boiling 1 1 -- 3 2

Copper Nitrate

1% Still, Agitated, & Aerated 70 1 1 3 3 3

5% Still, Agitated, & Aerated 70 1 1 3 3 3

50% Aqueous Solution Hot 1 1 3 3 3

Copper Sulphate

5% Agitated, Still, or Aerated 70 1 1 3 3 3

Saturated Solution Boiling 1 1 3 2 3

Creosote (Coal Tar) Hot 1 1 2 1 2

Creosote Oil Hot 1 1 2 2 2

Cyanogen Gas 70 1 1 -- -- --

Dichloroethane (Dry) Boiling 1 1 3 3 2

Dinitrochlorobenzene

Melted & Solidified 70 1 1 3 -- --

Dyewood Liquor 70 1** 1 3 -- 2

Epsom Salt (Magnesium Sulfate) Hot & Cold 1 1 3 1 2

Ethers 70 1 1 2 1 2

Ethyl Acetate (Conc. Sol.) 70 1 1 2 1 2

Ethyl Chloride 70 1 1 2 2 1

Ethylene Chloride 70 1 1 2 2 1

Ethylene Glycol 70 1 1 2 1 1

Ferric Chloride

1% Solution Still 70 2** 1** 3 3 3

1% Solution Boiling 3 3 3 3 3

5% Solution, Agitated, Aerated 70 3 3 3 3 3

Ferric Hydroxide

(Hydrated Iron Oxide) 70 1 1 3 -- 2

Ferric Nitrate

1% - 5% Quiescent or Agitated 70 1 1 3 3 3



°f 321 ss steel

1% - 5% Aerated 70 1 1 3 3 3

Ferric Sulphate

1% - 5% Quiescent or Agitated 70 1** 1 3 3 3

1% - 5% Aerated 70 1** 1 3 3 3

10% Boiling 1** 1 3 3 3

Ferrous Chloride

Saturated Solution 70 3 1 3 2 --

Ferrous Sulphate

Diluted Solution 70 1 1 3 2 3

Fluorine (Gas) Moist 70 3 3 3 3 3

Formaldehyde 40% Solution 1** 1** 2 1 1

Formic Acid, 5% Still 70 2 1 3 2 2

5% Still 150 2 1 3 2 3

Fuel Oil Hot 1 1 2 1 2

Containing Sulphuric Acid 3 2 -- 3 2

Furfural 70 1 1 2 1 2

Gallic Acid, 5% 70 - 150 1 1 3 -- 2

Saturated 212 1 1 3 -- 2

Gasoline 70 1 1 2 1 1

Gelatin 1 1 3 1 1

Glue Dry ~ 70 1 1 1 2 2

SolutionNAcid 70 - 140 2** 1 2 3 2

Glycerine 70 1 1 2 1 1

Hydrochloric Acid


Hydrocyanic Acid 70 1 1 3 3 2

Hydrofluoric Acid 70 3 3 3 3 1

Hydrofluosilic Acid 70 3 3 3 2 2

Hydrogen Peroxide 70 1** 1 3 3 2

Boiling 2** 1 3 3 2

Hydrogen Sulphide 70 1** 1 2 1 3

(Wet) 70 2** 1** 3 3 3

Hyposophite Soda (Hypo) 1 1 -- -- --

Ink 70 2** 1 3 3 1

Iodine 70 3 3 3 3 3

Iodoform 70 1 1 3 -- 2

Kerosene 70 1 1 2 1 2

Lactic Acid, 1% 70 1 1 3 2 2

1% Boiling 1 1 3 3 2

5% 70 1 1 3 2 2

5% 150 2 1 3 3 2

Boiling 2 1 3 3 2

10% 70 2 1 3 2 2

10% 150 2 1 3 2 2

Boiling 3 2 3 3 2

Concentrated 70 2 1 3 2 2

Concentrated Boiling 3 2 3 3 2

Lead (Molten) 750 2 2 -- 3 3

Lead Acetate 5% Boiling 1 1 3 -- 2



°f 321 ss steel

Linseed Oil 70 1 1 2 2 1

Plus 3% H2SO4 390 2 1 3 3 1

Magnesium Chloride

1% Quiescent 70 1** 1 3 2 1

1% Quiescent Hot 3 2** 3 2 1

5% Quiescent 70 1** 1 3 2 1

5% Quiescent Hot 3 2** 3 2 1

Magnesium Oxychloride 70 3 2** 3 -- --

Magnesium Sulphate, Hot/Cold 1 1 3 1 1

Malac Acid, Hot/Cold 2 1 3 -- 2

Mash Hot 1 1 -- -- 2

Mayonnaise 70 1** 1 3 -- 2

Mercury 1 1 1 3 3

Mercuric Chloride Dilute Sol. 70 3 3 3 3 3

Methanol (Methyl Alcohol) 1 1 2 1 1

Milk, Fresh or Sour 1 1 3 1 2

Mixed Acids

53% H2SO4 + 45% HNO1 Cold 1 1 3 3 3

Molasses 1 1 2 1 1

Muriatic Acid 70 3 3 3 3 2

Mustard 70 1** 1** 3 -- 2

Naptha, Crude 70 1 1 2 2 1

Naptha, Pure 70 1 1 2 2 1

Napthhalene Sulfonic Acid 70 1 1 3 -- 1

Nickel Chloride Solution 70 1** 1** 3 2 2

Nitrating Solutions, Hot/Cold 2 2 -- 2 3

Nickel Sulphate, Hot/Cold 1 1 3 1 1

Niter Cake Fused 2 1 3 -- 2

Nitric Acid

5% Đ50% Đ70% Boiling 1 1 3 3 3

65% 70 1 1 3 3 3

65% Boiling 2 2 3 3 3


65% Boiling 3 3 3 3 3

Fuming Concentrated 70 - 110 1 1 3 3 3

Fuming Concentrated Boiling 3 3 3 3 3

Nitrous Acid 5% 70 1 1 3 3 3

Oils, Crude, Hot/Cold 1** 1** 2 1

Oleic Acid 70 - 400 1** 1 2 2 2

Oxalic Acid

5% - 10% 70 1 1 3 2 2

5% - 10% Boiling 1 1 3 2 2

10% Boiling 3 3 3 2 2

25% - 50% Boiling 3 3 3 2 1

Paraffin, Hot/Cold 1 2 1 1

Phenol (See Carbonic Acid)

Petroleum Ether 1 1 2 -- 2

Phosphoric Acid

1% 70 1* 1* 3 3 2

1% Boiling 1* 1* 3 3 2



°f 321 ss steel

1% - 45lbs. Pressure 284 1 1 3 3 2

5% Quiescent or Agitated 70 1 1 3 3 2

5% Aerated 70 1 1 3 3 2

10% Quiescent 70 3 1 3 3 2

10% Agitated or Aerated 70 3 2 3 3 2

10% - 50% Boiling 1 1 3 3 3

80% 70 3 3 3 3 2

80% 230 3 3 3 3 3

85% Boiling 3 3 3 3 3

Pictic Acid 70 1 1 3 3 3

Potassium Bichromate, 25% 70 1 1 -- 3 2

25% Boiling 1 1 -- 3 2

Potassium Bromide 70 2** 1** 3 2 2

Potassium Carbonate 1% 70 1 1 2 2 1

Potassium Carbonate Hot 1 1 2 3 1

Potassium Chlorate, Sat. @ 212 Boiling 1 1 2 3 3

Potassium Chloride

1% Quiescent 70 1** 1** 3 2 1


5% Quiescent 70 1** 1** 3 2 1


5% Boiling 1 1 3 2 1

Potassium Chromium Sulfate

5% 70 1** 1 3 2 --

Sp. G. 1.6 Boiling 3 3 3 3 --

Potassium Cyanide 70 1 1 2 3 2

Potassium Ferricyanide, 5% - 25% 70 1 1 3 -- 2

25% Boiling 1 1 3 -- 2

Potassium Ferrocyanide, 5% 70 1 1 3 -- 2

Potassium Hydroxide, 5% 70 1 1 2+ 2 1

27% Boiling 1 1 2+ 2 1

50% Boiling 2 1 3 3 3

Potassium Hypochlorite 70 2 2 3 3 3

Potassium Nitrate

1% - 5% Still or Agitated 70 1 1 3 2 1

1% - 5% Aerated 70 1 1 3 2 1

50% 70 1 1 3 2 1

50% Boiling 1 1 3 -- 1

Molten 1022 1 1 3 -- --

Potassium Oxalate 1 1 -- -- --

Potassium Permanganate, 5% 70 1 1 2 -- 3

Potassium Sulphate

1% - 5% Still or Agitated 70 1 1 2 1 2

1% - 5% Aerated 70 1 1 2 1 2

Hot 1 1 3 1 2

Potassium Sulphide (Salt) 1 1 3 -- --

Pyrogallic Acid 1 1 2 -- --

Quinine Bisulphate (Dry) 2 2 2 -- --

Quinine Sulphate (Dry) 1 1 3 2 2

Sea Water 70 1** 1** 3 2 1



°f 321 ss steel

Sewage 1** 1** -- 1 1

Silver Bromiode 2** 1** 3 3 --

Silver Chloride 3 3 3 3 3

Silver Nitrate 1 1 3 3 3

Soap 70 1 1 2 1 1

Sodium Acetate (Moist) 1** 1 3 -- 2

Sodium Bicarbonate


5% Still 150 1 1 3 2 1

Sodium Acetate (Moist) 1** 1 3 -- 2

Sodium Bicarbonate


5% Still 150 1 1 3 2 1

Sodium Bisulphate, Solution 70 1** 1** 3 2 2

Saturated Solution 70 3 3 3 2 2

2g + 1g H2SO4 Liter 68 3 1** 3 2 2

Sodium Carbonate, 5% 70 - 150 1 1 2 2 1

5% - 50% Boiling 1 1 2 2 1

Molten 1650 3 3 3 3 1

Sodium Chloride, 5% Still 70 - 150 1** 1 3 2 1

20% Aerated 70 1** 1 3 2 1

Saturated 70 1** 1 3 2 1

Saturated Boiling 2** 1 3 2 1

Sodium Cyanide 70 1 1 2 3 --

Sodium Fluoride, 5% Solution 70 2** 1** 3 1 1

Sodium Hydroxide 70 1 1 2 2 1

Sodium Hypochlorite, 5% Still 2** 1** 3 2 3

Sodium Hyposulphite 70 1** 1 3 -- 1

Sodium Nitrate Fused 1 1 2 1 2

Sodium Perchlorate, 10% 70 - 150 1 1 -- -- --

Boiling 1 1 -- -- --

Sodium Phosphate 70 1 1 2 2 2

Sodium Sulphate, 5% Still 70 1 1 3 1 1


Sodium Sulphide, Saturated 2** 1 3 3 2

Sodium Sulphite, 5% 70 1 1 3 2 2

10% 150 1 1 3 2 2

Sodium Thiosulphate

Saturated Solution 70 1 1** 3 3 1

Acid Fixing Bath (Hypo) 70 1 1 3 3 2

25% Solution 70 1 1** 3 3 2

25% Solution Boiling 1 1** 3 3 2

Stannic Chloride Solution

Sp. G. 1.21 70 3 3 3 3 3

Boiling 3 3 3 3 3

Stannous Chloride, Saturated 3 1 3 -- 3

Steam 1 1 3 1 1

Stearic Acid 70 1 1 3 2 2

Starch, Aqueous Solution 1 1 -- -- 2



°f 321 ss steel

Strontium Hydroxide 1 1 -- -- --

Strontium Nitrate Solution Hot 1 1 3 -- 2

Sulphur, Moist 70 2** 1** 3 3 2

Molten 266 1 1 3 3 1

Molten 833 3 3 3 3 3

Sulphur Chloride (Dry) 3 3 3 1 2

Sulphur Dioxide Gas (Moist) 70 2 1 3 2 3

Gas (Dry) 575 1 1 3 1 2

Sulphuric Acid

5% - 10% 70 3 2 3 2 3

5% - 10% Boiling 3 3 3 3 3

50% 70 3 3 3 3 3

50% Boiling 3 3 3 3 3


Concentrated Boiling 3 3 3 2 3


Fuming 70 3 2 3 2 3

Sulphurous Acid, Saturated 70 3 2 3 2 3

Saturated – 60 lb. Pressure 250 3 2 3 2 3

Saturated – 70 – 125 lb Pressure 310 3 2 3 2 3

150 lb Pressure 375 3 2 3 2 3

Sulphurous Spray 70 3 3 3 3 3

Tannic Acid 70 1 1 3 1 3

150 1 1 -- 1 3

Tanning Liquor 70 1 1 -- -- 1

Tar 1 1 2 1 2

Tartaric Acid 1 1 3 1 2

Tin Molten 3 3 3 3 --

Trichloracetic Acid 70 3 3 3 2 3

Trichlorethylene (Dry) 70 1** 1 3 1 1

(Moist) -- -- -- 2 --

Varnish 70 1 1 2 1 1

Water 1 1 2 1 1

Yeast 1 1 -- 3 1

Zinc Molten 3 3 3 3 3

Zinc Chloride, 5% Still 70 1** 1** 3 3 2

Boiling 2** 2** 3 3 2

Zinc Cyanide, Moist 70 1 1 3 -- --

Zinc Nitrate, Solution Hot 1 1 3 -- --

Zinc Sulphate 1 1 3 2 2

Glossary

abrasion : External damage to a hose assembly caused by it being rubbed on a foreign object

ambient or atmospheric conditions : The surrounding conditions, such as temperature, pressure, and corrosion, to which a hose assembly is exposed.

amplitude of vibration and/or lateral movement : The distance a hose assembly deflects laterally to one side from its normal position, when this deflection occurs on both sides of the normal hose centerline.

anchor : A restraint applied to a pipeline to control its motion caused by thermal growth.

annular : Refers to the convolutions on a hose that are a series of complete circles or rings located at right angle to the longitudinal axis of the hose (sometimes referred to as bellows)

application : The service conditions that determine how a metal hose assembly will be used.

armor or casing : Flexible interlocked tubing placed over the entire length or in short lengths at the end of a metal hose to protect it from physical damage and to limit the bending radius.

attachment : The method of fixing end fittings to flexible metal hose – welding, brazing, soldering, swaging, or mechanical.

axial movement : Compression or elongation of the hose along its longitudinal axis.

basket weave : A braided pattern in which the strands of wire alternately cross over and under two braid bands (two over – two under)

bend radius : The radius of a bend measured to the hose centerline.

braid : A flexible wire sheath surrounding a metal hose that prevents the hose from elongation due to internal pressure. Braid is composed of a number of wires wrapped helically around the hose while at the same time going under and over each other in a basket weave fashion.

braid angle : The actual angle formed by the braid strands and the axis of the hose.

braid makeup : Term applies to description of braid, i.e. 36 x 8 x 0.014, 304L SS, Where 36 = number of carries, which equals the number of bands in a braid; 8 = number of wires on each carrier; 0.014 = wire diameter in inches; 304L = material, type 304L stainless steel.

pa g e 0 1 / 0 4

braid sleeve, braid band, or rerrule : A ring, made from tube or metal strip placed over the ends of a braided hose to contain the braid wires for attachment of fittings.

braid wear : Motion between the braid and corrugated hose which normally causes wear on the O.D. of hose. Braided Braid- In this braid, the strand of wire on each car-rier of the braiding machine are braided together, and then braided in normal fashion, hence the term braided braid.

brazing : A process of joining metals using a non-ferrous filler metal, which melts above 800 OF, yet less than the melting of the “parent metals” to be joined.

butt weld : A process in which the edges or ends of metal sections are butted together and joined by welding.

casing : (See Armor definition)

controlled flexing : Controlled flexing occurs when the hose is being flexed regularly, as in connections to moving components. Example: Platen presses, thermal growth in pipe work.

convolution : The annular or helical flexing member in corrugated or strip wound hose.

corrosion : The chemical or electro-chemical attack of a media upon a hose assembly.

cycle-motion : The movement from normal to extreme position and return.

developed length : The length of a hose plus fitting (over-all) required to meet the conditions of a specific application.

diamond weave : A braid pattern in which the strands alternately cross over one and under one of the strands (one over – one under). Also known as plain weave.

dye penetrant inspection or test : A method for detect-ing surface irregularities, such as cracks, voids, porosity, etc. The surface to be checked is coated with a red dye that will penetrate existing defects, Dye is removed from surface and a white developer is applied. If there is a defect in the surface being checked, the red dye remain-ing in it cause the white developer to be stained, thereby locating the defective area.

displacement : The amount of motion applied to a hose defines as inches for parrel offset and degrees for radial misalignment.

dog-Leg assembly : Two hose assemblies joined by a common elbow.

Glossary

duplex assembly : An assembly consisting of two hose assemblies – one inside the other – and connected at the ends.

effective thrust area : Hose and Bellows- The cross-sec-tional area described by the outside diameter (at the tops of the convolutions) less two times the metal thickness of the hose or bellows.

elastic (intermittent flexure) : The smallest radius that a given hose can be bent to without permanent deforma-tion of the metal in its flexing members (convolutions or corrugations).

erosion : The wearing away of the inside convolutions of a hose caused by the flow of the media conveyed, such as wet steam, abrasive particles, etc.

exposed length : The amount of active (exposed) hose in an assembly. Does not include the length of fittings and ferrules.

fatigue : Failure of the metal structure associated with, or due to, the flexing of metal hose or bellows.

ferrule : (See definition for Braided Sleeve)

fitting : A loose term applied to the nipple, flange, union, etc., attached to the end of a metal hose.

flat braid : Has a braid angle greater than 45O (see Braid Angle).

flow rate : Pertains to a volume of media being conveyed in a given time period, e.g. cubic feet per hour, pounds per second, gallons per minute, etc.

frequency : The rate of vibration or flexure of a hose in a given time period, e.g. cycles per second (CPS), cycles per minute (CPM), cycles per day (CPD), etc.

galvanic corrosion : Corrosion that occurs on the less noble of two dissimilar metals in direct contact with each other in an electrolyte, such as water, sodium chloride in solution, sulphuric acid, etc.

guide (for piping) : A device that supports a pipe radially in all directions, but allows free longitudinal movement.Hardware- A loose term used to describe parts of a hose assembly other than the hose and braid, e.g. fittings, col-lars, valves, etc.

helical : Used to describe a type of corrugated hose hav-ing one continuous convolution resembling a screw thread.

pa g e 0 2 / 0 4

helical wire armor : To provide additional protection against abrasion under rough operating conditions, metal hoses can be supplied with an external round or oval sec-tion of wire spiral.

inside diameter : This refers to the free cross section of the hose and (in most cases) is identical to the nominal diameter.

installation : Referring to the installed geometry of a hose assembly.

interlocked hose : Formed from profiled strip and wound into flexible metal tubing with no subsequent welding, brazing, or soldering. May be made pressure tight by winding in strands of packing.

intermittent bend radius : The designation for a radius used for non-continuous operation. Usually an elastic radius.

lap weld (lw) : Type of weld in which the ends or edges of the metal overlap each other and are welded together.

liner : Flexible sleeve used to line the I.D. of hose when the velocity of gaseous media is in excess of 180 ft per second.

loop installation : The assembly is installed in a loop or “U” shape, and is most often used when frequent and/or large amounts of motion are involved.

mechanical fitting or reusable fitting : A fitting not permanently attached to a hose which can be disassem-bled and used again.

medium (singular)/media (plural) : The substance(s) being conveyed through a piping system.

minimum bend radius : The smallest radius to which a hose can be bent without suffering permanent deformation of its convolutions.

misalignment : A condition in which two points, intended to be connected, will not mate due to their being laterally out of line with each other.

nominal diameter : A term used to define the dimensions of a component. It indicates the approximate inside diameter.

offset - Lateral, Parallel, & Shear : The amount that the ends of hose assembly are displaced laterally in relation to each other as the result of connecting two misaligned terminations in piping system, or intermittent flexure required in a hose application

Glossary

operating conditions : The pressure, temperature, motion, media, and environment that a hose assembly is subjected to.

outside diameter : This refers to the external diameter of a metal hose, measured from the top of the corrugation or braiding.

penetration (weld) : The percentage of wall thickness of the two parts to be joined that is fused into the weld pool in making a joint. Our standard for penetration of the weld is 100% in which the weld goes completely through the parent metal of the parts to be joined and is visible on the opposite side from which the weld was made.

percent of braid coverage : The percent of the surface area of a hose that is covered by braid.

permanent bend : A short radius bend in a hose assembly used to compensate for misalignment of rigid piping, or where the hose is used as an elbow. Hose so installed may be subjected to minor and/or infrequent vibration or movement.

pipe gap : The open space between adjacent ends of two pipes in which a hose assembly may be installed.Pitch- The distance between the two peaks of adjacent corrugation.

ply, plies : The number of individual thicknesses of metal used in the construction of the wall of a corrugated hose.

pressure : Usually expressed in pounds per square inch (PSI) and, depending on service conditions, may be applied internally or externally to a hose.A. Absolute Pressure : A total pressure measurement sys-tem in which atmospheric pressure (at sea level) is added to the gage pressure, and is expressed as PSIA.B. Atmospheric Pressure : The pressure of the atmosphere at sea level which is 14.7 PSI, or 29.92 inches of mercury.C. Burst Pressure (Actual and Rated)

1. Actual : Failure of the hose determined by the lab-oratory test in which the braid fails in tensile, or the hose ruptures, or both, due to the internal pressure applied. This test is usually conducted at room temperature with the assembly in a straight line, but for special applications, can be conducted at elevated temperatures and various configurations.

pa g e 03 / 0 4

C. Burst Pressure (Actual and Rated)2. Rated : A burst value which may be theoretical, or a percentage of the actual burst pressure developed by laboratory test. It is expected that, infrequently, due to manufacturing limitations, an assembly may burst at this pressure, but would most often burst at a pressure greater than this.

D. Deformation Pressure (Collapse) : The pressure at which the corrugations of a hose are perma-nently deformed due to fluid pressure applied internally, or, in special applications, externally.E. Feet of Water or Head Pressure : Often used to express system pressure in terms of water colum height. A column of water 1 ft high exerts a 0.434 PSI pressure at its base.F. Proof Pressure or Test Pressure : The maximum internal pressure which a hose can be subjected to without either deforming the corrugations, or exceeding 50% of the burst pressure. When a hose assembly is tested above 50% of its burst pressure, there often is a permanent change in the overall length of the assembly, which may be undesir-able for certain applications.G. PSIA : Pounds per square inch absolute.H. PSIG : Pounds per square inch gauge.I. Pulsating Pressure : A rapid change in pressure above and below the normal base pressure, usually associated with reciprocating type pumps. This pulsating pressure can cause excessive wear between the braid and the tops of the hose corrugations.J. Shock Pressure : A sudden increase of pressure in a hydraulic or pneumatic system, which produces a shockwave. This shock can cause severe permanent deformation of the corrugations in a hose, as well as rapid failure of the assembly due to metal fatigue.K. Static Pressure : A non-changing constant pressure.L. Working Pressure : The pressure, usually internal, but sometimes external, imposed on a hose during operating conditions.

Glossary

pressure carrier : The hose portion of a braid assembly.Profile- Used in reference to the contour rolled into strip during the process of manufacturing stripwound hose, or the finished shape of a corrugation; formed from a tube by either the “bump-out”, “sink”, or roll forming processes, used in making corrugated hose.

random motion : The non-cyclic uncontrolled motion of a metal hose, such as occurs in manual handling. Reusable Fitting (See Mechanical Fitting)

safety factor : The relationship of working pressure to burst pressure.

scale : Generally refers to the oxide in a hose assembly brought about by surface conditions or welding. An oxide.

seamless : Used in reference to a corrugated metal hose made from a base tube that does not have a longitudinal seam as in the case of a butt weld or lap welded tube.

squirm : A form of failure in which the hose is deformed into an “S” or “U” bend as the result of excessive inter-nal pressure being applied to unbraided corrugated hose while its ends are restrained, or in a braided corrugated hose which has been axially compressed, loosening the braid, while the hose is pressurized. This is particularly true with long lengths of braided hose subjected to manual or mechanical handling.

steep braid (angle) : Braid having a braid angle of less than 45O.

strand(s) : Individual groups of wire in a braid. Each group is supplied from a separate carrier in the braiding machine.

stress corrosion : A form of corrosion in stainless steel normally associated with chlorides.

strip wound : (See definition for Interlocked)Tig Weld- The tungsten inert gas welding process some-times referred to as shielded arc. The common trade name is heliarc.

traveling loop : A general classification of bending, wherein the hose is installed to a U-shape configurationClass A Loop : An application wherein the radius remains constant and one end of the hose moves parallel to the other end of the hose.Class B Loop : A condition wherein a hose is installed in a U-shape con-figuration and the ends move perpendicular to each other so as to enlarge or decrease the with of the loop.

pa g e 0 4 / 0 4

torque (torsion) : A force the produces, or tends to produce, rotation of or torsion through one end of a hose assembly while the other end is fixed.

velocity : The Speed at which the medium flows through the hose, usually specified in feet per second.

velocity resonance : The sympathetic vibration of convolutions due to the buffeting of a high velocity gas or air flow.

vibration : Low amplitude motion occurring at high frequency.

welding : The process of localized joining of two or more metallic components by means of heating their surfaces to a state of fusion, or by fusion with the use of additional filler materials.

WWW.ARTHOMSON.COM

The A.R. Thomson Group was established in 1967 as a regional manufacturer/distributor of gaskets and other fluid containment products. With the rapid growth of oil and gas production, petrochemical, oil refining and pulp and paper industries, our manufacturing facilities expanded to meet increased demand for these products. We currently design and manufacture a wide variety of products using the latest technology. ARTG has also increased the product scope for its Fluid Control Division. This includes a complete line of process and specialty valves along with fittings, pumps and accessories for process as well as product transfer piping systems.

Further to our industrial product offering, we have developed an Energy Efficiency and Environmental program which identifies and minimizes system inefficiencies. The various elements of the program can significantly reduce operating costs and environmental impact. As part of this program ARTG has developed a technical services team which provides on-site training, equipment surveys and audits, application engineering and maintenance and repair optimization programs. Since 1967, we have developed our expertise and know-how to become the leader in solving fluid containment and control problems. No matter what your control or containment needs, we can help.

CORPORATE PROFILE

*Red Deer County215 Clearskye WayT4E 0A1Phone: (403) 341-4511Fax: (403) 341-4243

*Denotes manufacturing location

Parksville#8, 1009 Allsbrook RoadV9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591

Calgary#7, 6320 - 11 Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394

Dartmouth#32, 10 Morris DriveB3B 1M2Phone: (902) 468-9120Fax: (902) 468-9087

Resident Sales Rep.Phone: (506) 623-9254Fax: (506) 773-3048

*Surrey3420 - 189 StreetV3Z 1A7Phone: (604) 507-6050Fax: (604) 507-6098

BRITISH COLUMBIA

ALBERTA

*Fort McMurray230F Mackay CrescentT9H 5C6Phone: (780) 790-0730 Fax: (780) 790-0278

Clairmont#102, 6902 - 98 StreetT0H 0W0Phone: (780) 538-1792Fax: (780) 538-3488

*Edmonton10030 - 31 AvenueT6N 1G4Phone: (780) 450-8080Fax: (780) 463-2021

*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445

SASKATCHEWAN MANITOBA

*Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599

WinnipegResident Sales Rep.Phone: (204) 999-3997Fax: (306) 584-2599

SaskatoonResident Sales Rep.Phone: (306) 716-6423Fax: (306) 584-2599

QUEBEC

ONTARIO

NOVA SCOTIANEW BRUNSWICK

Mississauga#1A, 3350 Ridgeway Drive L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994

*Sarnia281 Campbell StreetN7T 2H2Phone: (519) 336-3678Fax: (519) 336-0589

Prince George#7, 1839 - 1 AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644

TrailResident Sales Rep. Phone: (250) 368-1239Fax: (604) 507-6098

Thunder BayResident Sales Rep.Phone: (807) 628-4279 Fax: (807) 623-5480

Documents

THOMSON CANFLEX Flexible Metal Hose · Hose Specifications page 01 / 06 Our corrugated metal hose comes in a variety of materials and braid layers to suit your specific requirements