Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
This file has been cleaned of potential threats.
If you confirm that the file is coming from a trusted source, you can send the following SHA-256
hash value to your admin for the original file.
2bb2147f70676e7c237ce0fc8b4b2f99358e8280a24ba412f679b45b03fe65ce
To view the reconstructed contents, please SCROLL DOWN to next page.
� ला� म़ा अनुसंधान स�ं थान INSTITUTE FOR PLASMA RESEARCH
परमाणु ऊजा� �वभाग, भारत सरकार का एक सहायता �ा� त स�ंथान An Aided Institute of Department of Atomic Energy, Government
of India
इि"दरा पलु के पास, भाट, गांधीनगर – 382 428 भारत
दरूभाष: (079) 2396 2020/2021/2028
फै-स: 91-079-23962277
वेब: www.ipr.res.in
NEAR INDIRA BRIDGE, BHAT DIST. GANDHINAGAR - 382 428 (INDIA) Phone: (079) 2396 2020/2021/2028 Fax : 91-079-23962277 Web : www.ipr.res.in
ENQUIRY
ENQUIRY NO : IPR/EQL/20-21/244
Date : 09-11-2020
Due on : 10-12-2020 by 1:00 PM IST
Please send your offer in sealed envelope specifying Enquiry No, Date & Due Date, ALONG WITH your credentials for the following items: Important Note: Please note that e-mail quotations are not acceptable however you may send your queries (if any) to [email protected] Please ensure your sealed quotation reaches this office not later than above mentioned due date and time. Kindly go through the following documents properly before quoting which are available on the IPR web portal i.e., http://www.ipr.res.in/documents/tender_terms.html / attached herewith. 1) Instructions to the bidders & Terms and conditions (refer Form No: IPR-LP-01.V4)
2) Bidding format GST for Goods and Services (IGST/CGST/SGST TAX BENEFITS): Please refer clause no: 8 of Form No: IPR-LP-01.V4
QUOTATION SHOULD BE ADDRESSED TO PURCHASE OFFICER ONLY
Sr No
Description Quantity
1 Design, Fabrication, supply and commissioning of radiation shielding
door 1.0 Nos.
Note: 1. GeM Availability Report ID: - GEM/GARPTS/06112020/T0Sl665LEBVL
dated?06/11/2020 2. Unsigned quotations are not acceptable. Quotation
should be submitted duly signed on ALL
PAGES invariably. 3. Quotation to be submitted in INDIAN CURRENCY. Quotations received other than Indian
Rupees will be rejected
4. Customs Duty Exemption Certificate will not be issued 5. Delivery Period:
6. TDS As per CGST ACT: As per provisions of section No. 51 of the CGST Act 2017, TDS @2% (IGST 2% or CGST 1% and SGST 1%) will be deducted
while making payment to the suppliers
where total value of orders/contracts/work orders exceeds Rs. 2.5 lakhs.
Delivery time-04 months Encl: as par attachment
Information to Vendors: We are working towards a single platform for our future
requirement. Hence, please refer IPR website i.e, http://www.ipr.res.in/documents/tendersenq.html for our future requirement.
Technical Specification Sheet Radiation Shielding Door
1. Introduction Radiation Shielding Door is required at the entry of Neutron Generator Hall. The dimension of entryis 1960 mm (W) x 2940 mm (H). The details of radiation shielding door for opening and closing of theneutron generator hall are given below.
System Description: A single horizontal electric motor operated sliding door of the size 2540 mm (W)X 3380 mm (H) X 334 mm (thick) is required for opening and closing of Neutron Generator Hall. Theconcept of motorized sliding door is based on rack-pinion mechanism, wormreducer/guide/guideway/guide roller mechanism. The base plate, guide/guideways/guide rollermechanism guide the door movement for its linear stroke and is also capable to keep door in verticalposition when it moves on guideways and when it rest on guideways and prevent toppling. Doorbody/frame structure is made of MS. The door weight along with High Density Polyethylene (HDPE)is approximately 4,600 kg. The radiation shielding is done by 420 no of HDPE blocksarranged/stacked in (10x14) x3 layers as shown in Figure 1.
The sliding stroke length of the door is 2,010 mm. Door linear velocity will be around 32 mm per secto cover horizontal stroke distance in approximate 64 sec. The door movement should besmooth/jerk free at the time of movement both during forward and backward travel. Also, in case ofpower/motor failure, a suitable mechanism for manual opening of the door for human entry shallalso be provided as an emergency entry option to the hall.
2. Scope of the workDesign, fabrication, supply, installation and commissioning of Radiation Shielding Door (RSD) as pertechnical specifications mentioned in the tender document.
A. The details of scope of the work are given below:a. Engineering design, analysis of door frames, rail with guideway, load bearing capacity and
functionality checks for horizontal movement, rack/pinion design, worm gear reducer drive,and motor power requirements from conceptual design and drawings supplied to thevendor in tender enquiry by IPR.
b. Preparation and submission of detailed fabrication & manufacturing drawings and QAP ofdoor for IPR’s approval.
c. Procurement of all materials as per bill of material (BOM), including bought out items likemotor drive, worm reducer, couplings etc.
d. Fabrication and site assembly including placing/stacking of the HDPE blocks, installation,validation of all items/ components as per approved fabrication drawings
e. 2 coat of epoxy painting and 2 coat of primer painting of door with frames as per Purchaser’spainting specification at vendor location and if required at site. The color will be decided bythe IPR at later stage.
f. Packing, marking, forwarding, safe delivery and unloading at IPR, Gandhinagar site.g. Handling and movement to the place of erection from place of unloading, handling at Fusion
Neutronics Laboratory.h. Complete erection of entire door with all accessories and assembly/installation which will
require digging of trench of suitable dimension in concrete floor of neutron generator hallfor grouting of base plates and laying of guide-way.
Page 1 of 5
i. Filling of paraffin wax in all the hollow sections which are part of support frame of door (partno 1,2 & 7 of sheet no 2 of Annexure-I)
j. Placing/stacking of High Density Polyethylene (HDPE) Blocks k. Machining of High Density Polyethylene (HDPE) Blocks if required while stacking/placingl. Electrical connections: All the electrical connections and layout of the cables shall be carried
out by the vendor. The limit switches for operation of door shall be provided on both insideand outside of the hall. Operation panel shall be provided at the bottom on both side of thehall
m. In case of power/motor failure, suitable mechanism for manual opening of the door forhuman entry shall be provided
n. Powder coated MS Paneling for full covering of motor drive assembly and sliding guide shallbe provided
o. All other equipment/jig/fixture/setup and services which are required for the completescope of design, manufacture, supply, erection, testing and commissioning of specifiedequipment other than those listed out in tender technical specification shall be deemed tobe included in Contractor’s scope of work.
B. Work completion duration: 04 (four) months from the date of Purchase order as per followingschedule (i) Procurement of raw materials, bought out items, fabrication, machining of all components
and delivery to IPR within 03 months from date of P.O.(ii) Site assembly, installation, validation within 01 month from date of delivery to IPR
C. Free Issue Material (FIM): High Density Polyethylene (HDPE) blocks will be provided by IPR atfree of cost (cost of the FIM Rs. 5,56,500/- approx). Size of the blocks: 250 mm x 250 mm x 100mm, Quantity: 420 no. Total mass (weight) of blocks 2500 Kg approx.
3. Applicable codes Material test certificates as per ASTM/IS code Motor drive as per IS code Worm reducer drive as per IS code Linear Dimensional tolerances as per DIN ISO 2768 m Structural welding as per IS code
4. Applicable drawing As per enclosed drawings list, Refer Annexure-I
5. Documents approval1) Engineering design and fabrication/manufacturing drawings have to be submitted to IPR for final
approval before carrying out fabrication work. 2) Material test certificates and guarantee/warrantee certificates for bought out items have to be
submitted along with the shipment.
6. Technical requirementsThe material of construction/bought out items/parts of the door is mentioned below.
Page 2 of 5
Sr.No.
Items/Parts Material of construction/Make
1 Door frame, side coveringplates
MS (IS:2062 : 1999)
2 Side covering plates MS (IS:2062 : 1999)3 Supports structure/guide
rollersMS (IS:2062 : 1999), NYLON
4 Bolts, nuts, washers Alloy steel, class 10.95 Guide rail/guideways Bearing steel (ASTM 52100), quench & tempered6 Gear/rack BS970: 1955 EN 30A, IS 30Ni4Cr1
7 Electric motor 1.5 KW (2 HP), 8 pole motor, 705 rpm, hazard area motor/standard make, testing standard IS 4029, shaft diameterapprox. 28 mm
8 Worm gear reducer Reduction Ratio70: 1, Input power 2HP/standard make As per IS3734:1983, shaft diameter approx. 32 mm
9 Couplings Standard pin/bush type flexible couplings, IS 2693:198910 Arc welding IS 816:1969 Code of Practice for use of Metal Arc Welding for
General Construction in Mild Steel
7. Tentative Assembly sequencea) Fixing of base plate in the trench dug out at the concrete floor and grouting with foundation
bolts to make it a rigid structure. b) Mounting of two parallel semi-circular guideways on the base plate using nuts/bolts with
required dimensional tolerancesc) Placing/inserting of two matching guides on the parallel guideways, checking of their alignments
and smooth jerk free movements d) Mounting of the empty door frame structure with side plates opened on the both the guides,
checking of their alignments and smooth jerk free movements.e) The stacking of the HDPE blocks in required pattern in the empty door for radiation shieldingf) Covering of the door frame with side cover plates on to complete the radiation shielding also to
provide reinforcement to the door frame structure.g) Mounting of the rack and guide rollers with nuts/bolts on the top of the door frameh) Fixing of I Beam supports with reinforcements drawn from side walls to position/mount the
drive motor coupled with worm reducer and rack pinioni) Engaging the rack pinion mounted on motor/reducer shaft with matching rack on door framej) Lubrication of all bottom guide/guideways to reduce friction co-efficient and to provide a
smooth jerk free movement without toppling, prior to switching on the drive motor
8. Acceptance criteria (at IPR site)1. Dimensional tolerances, welding specifications during fabrication & manufacturing will be
examined.2. Door will be examined for smooth and jerk free operation.3. Validation of one complete cycle i.e. time required for opening and closing the door with
theoretical calculation. Time for opening or closing of door between 50 to 100 seconds.Repeatability of door closing and opening shall be demonstrated.
4. Manual opening of the door for human entry in case of power failure/motor breakdowncondition will be examined.
Page 3 of 5
9. Guarantee/warrantyWarranty of 01 (one) year from the date of satisfactory commissioning and erection on materials,bought out items procured, workmanship etc shall be provided.
10. Terms and conditions/Guidelines 1. Site Visit: Vendor may visit IPR side for better understanding of scope of the work prior
to submission of quotations.2. Design modification: Vendor may modify the design of Radiation Shielding Door
submitted by IPR if required without changing door dimensions and major modification.Vendor should submit the modified fabrication drawings for the approval of IPR. Onlyafter approval of IPR, fabrication shall be started by vendor.
3. Site clearance: Vendor should clear the IPR site as soon as commissioning of door iscompleted.
Annexure I: List of Drawings
Serial No Drawing Description Sheet No01 MOTORIZED SLIDING DOOR ASSEMBLY Sheet 01 of 0702 MOTORIZED SLIDING DOOR DETAILS Sheet 02 of 0703 MOTORIZED SLIDING DOOR DETAILS Sheet 03 of 0704 MOTORIZED SLIDING DOOR DETAILS Sheet 04 of 0705 MOTORIZED SLIDING DOOR DETAILS Sheet 05 of 0706 MOTORIZED SLIDING DOOR GUIDE ROLLER DETAILS Sheet 06 of 0707 MOTORIZED SLIDING DOOR RACK PINION DETAILS Sheet 07 of 07
Page 4 of 5
Arrangement of HDPE blocks
Fig 1: Arrangement of HDPE Blocks in Radiation shielding Door
Page 5 of 5
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOORASSEMBLY
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET1 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
25
340
6
5450
500
550
O
O
6000
Section view O-O
1
3
DOOR WALLSIDE WALL
6 MOTOR SUPPORT MS 015 RACK PINION AND MOTOR EN30A 014 GUIDE ROLLER ASLY NYLON/MS 013 BOTTOM MOOVING
ARRANGEMENTBEARINGSTEEL
01
2 TOP GUIDE ROLLEARRANGEMENT
MS 01
1 FRAME STRUCTURE MS 01PART NO. DESCRIPTION MAT QTY REMARKS
2
B
A
Detail B
4
5
100
30
15
320
2
4334
Detail A
8 2540x326x10_Rack Base plate MS 017 320X114x3240 VER HOLLOW SECTION MS 016 200x70x2312 C-CHANNEL MS 015 3154x2540x6 BACK PLATE MS 014 2540x320X17 BOTTOM PLATE MS 013 3354x2540x8 FRONT PLATE MS 012 320X114x3240 VER HOLLOW SECTION MS 021 320X114x2540 HOR HOLLOW SECTION MS 01PART NO DECRIPTION MAT QTY REMARKS
1
2
7
6
4
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOORDETAILS
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET2 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
2540
334
3369
1099 10992
7
D
D
E E
Section view D-D
3
4
5
6
1
F
G
Section view E-E
114
320
10
2540
320
114
6
6
3240
320
1146 6
3240
70
200
200
70
12
2312
68
10
326
Detail F
8
68
15
334
Detail G
JJ
K
K
15Section view J-J
Section viewK-K
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOORDETAILS
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET3 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
5451
20
339 900 900 20
5342
500
300
210210
220
20
300
10250
150
10
100
50
1
C
C
500
Section view C-C
76 STIFFNER 10MM THICK MS 065 ISMC100x50x230L-HOR MS 064 ISMC100x50x230L-VER MS 063 500x300x20 PLATE MS 022 ISMC250x150x10x500L CHANNEL MS 011 ISMB250x5342L MS 01PARTNO
DESCRIPTION MAT QTY REMARKS
4
H
250
125
500
20
500
580
230
230 100
150
Detail H
2 3
56
4
BASE PLATEMAT:MSQTY: 1No.
1
2
3
4
GUIDE BLOCKQTY:4MAT: BEARING STEEL
GUIDE RODMAT:BEARING STEELQTY:2NOs.
STRIPMAT: MSQTY: 02
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOORDETAILS
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET4 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
4575
320
190
300 TYP.
620 615 615
150I
I
L
L
100
Sectionview I-I
79
Sectionview L-L
1
3
2
4
4575
25
300 TYP. M12
M
M
190
320
21
Section view M-M
65
105
12.5
71.5
15018
13
37.5
65
20
4575
300 TYP.
20
10 2450
5 STIFFNER 10MM THICK MA 014 400X300X10 PLATE MS 013 500x300X20 PLATE MS 022 ISMB250x125x2450L MS 011 ISMB250x125x2500L MS 01PART NO DESCRIPTION MAT QTY REMARKS
3
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDINGDOOR DETAILS
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET5 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
300
400
4
2520
1550
25
1
2
3
5
STIFFNER10MM THICK
250
125
300
220
40210 210
20
500
20
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOORGUIDE ROLER DETAILS
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET6 OF 7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
70
149
20R
P P
370
20
20
49
80
25
130
2020
120
80
Section view P-PScale: 1:3
4
GUIDE ROLER ASSEMBLYQTY: 6NOs.MAT: MS
150
NOTE: PINION: MODULE 3mm TEETH 20 PRESSURE ANGLE 20 DEG.
RACK : MODULE 3mm PRESSURE ANGLE 20 DEG.FACE 49MM HEIGHT=39MM
MOTOR WITH WORM GEAR REDUCER: RATIO 70:1
AH BG
DE CF BG AH
33
22
44
11
This drawing is our property; it can't be reproduced or communicated without our written agreement.
18/09/20SCALE DATE TITLE
MOTORIZED SLIDING DOOR DETAILSRACK PINION
ASS'Y GROUP:
UNLESS OTHERWISE STATEDALL DIMENSIONS ARE IN `mm'
CHECKED
APPROVED
REF DRG NO:
DRG.NO
REV
SHEET7 OF7
Institute for Plasma ResearchBhat, Near Indira Bridge,Gandhinagar 382428,Gujarat (India)
K.R.R.DRAWN
0IPR/20/A3/ MOTORISED DOOR/8863
1:1
F E D C
REVISION COLUMN
+0-10'
OVER 120-400
LENGTH IN mm OF SHORTER SIDE OF ANGLES
MACHINING DEVIATIONS FOR NON-TOLERANCED DIMENSIONS
1.6-8DRG.NO
UPTO 10
_+0-20'
50-120
_+0-30'
10-50
+1_
CO-ORDINATED BY
_
8-25
+0.5
120-315
_+0.2
6-30
0.025-1.6
LENGTH
DIA
OR
+0.1_
UPTO6
+0.3
30-120
_ _
< 0.025
REV ZONE DESCRIPTION APPROVED REMARKSDATE
P.SANTRA
2540
4966
RACK
PINION
MOTOR
An Aided Institute of Department of Atomic Energy, Government of India
परमाणु ऊर्ाा विभाग, भारत सरकार का एक सहायता प्राप्त संस्थान
प्लाज़्मा अनसुधंान ससं््थान
Bhat, Near Indira Bridge, Gandhinagar – 382428, Gujarat (INDIA)
Institute for Plasma Research )भाट, इनद्ीरा पलु के पास, गांधीनगर – 382428 , गुर्रात ( भारत
Phone: +91-79-23962021 to 23962028 ; Fax: +91-79-23962277 Website: www.ipr.res.in
Form No: IPR-LP-01.V4
INSTRUCTIONS TO BIDDERS AND TERMS AND CONDITIONS
1. The Quotation and any order resulting from this enquiry shall be governed by our Conditions of Contract/Purchase
Order and supplier quoting this enquiry shall be deemed to have read and understood the same in toto.
2. Where counter terms and conditions have been offered by the Tenderer, the same shall not be deemed to have been
accepted by IPR unless our specific written acceptance thereof is obtained.
3. Quotation: Quotation should be submitted in the prescribed QUOTATION FORMAT attached with this Enquiry
and the same should be submitted to the Purchase Officer, IPR in a sealed envelope superscribing the same with our
enquiry No., date, due date and brief description of item on or before the due date. Late/delayed/incomplete/unsigned
quotations will not be considered. Envelopes received without Enquiry number, date, due date and brief description
of item may be rejected. The quoted prices should be firm for a period of 90 days from due date for placing order.
IPR is not bound to accept lowest rate/s. IPR reserves the right to place on one or more parties. The scope of supply
includes insurance by the Contractor/Supplier.
4. Specifications: Material should be offered strictly confirming to our specifications/drawings. Deviation, if any,
should be clearly indicated by the supplier in their quotation. The Tenderer should also indicate the Make/Type
number of the materials offered and catalogues, technical literature and samples, wherever necessary should
accompany the quotation. Clarification/s on drawings should be obtained before submitting quotation.
5. Terms of Prices: Quotation should be submitted on door delivery basis without extra charge wherever possible. For
quotations on Ex-Works, Ex-godown basis the approximate packing and forwarding charges should be indicated by
the supplier. In the case of local suppliers, the material is to be delivered at our stores free of charge.
5.1 In respect of tenders on Ex-works basis, in case the tenderer has not mentioned in the offer packing, forwarding and
transportation charges for safe delivery up to Purchaser's site, 2% of the price quoted towards packing (in respect of
both local and outstation firms), 1% of the basic price quoted towards safe delivery charges in respect of local
tenderer and 3% of the basic price quoted towards safe delivery charges in respect of outstation firm will be added
for comparison of offers on safe door delivery at Purchaser's site.
5.2 Prices are required to be quoted according to the units indicated in the tender form/Enquiry. When Quotations are
given in terms of units other than those specified in the tender form, relationship between the two sets of units must
be furnished
6. Tender should be free from Correction and Erasures. Corrections, if any, must be attested. All amounts shall be
indicated both in words as well as in figures. Where there is difference between amounts quoted in words and figures,
amount quoted in words shall prevail. Unsigned quotations will summarily be rejected. If there is a discrepancy
between the unit price and total price, unit price shall prevail.
7. IPR shall be under no obligation to accept the lowest or any tender and reserves the right of acceptance of the whole
or any part of the tender or portion of the quantity offered and the tenderers shall supply the same at the rate quoted.
8. Goods & Services Tax (GST): The details of Taxes/GST and other levies legally leviable and intended to be claimed
should be clearly indicated in the tender. Where this is not done, no claim on these accounts would be admissible
later.
a) GST for Goods (IGST/CGST/SGST TAX BENEFITS): IPR is entitled to avail tax benefit as per the following notifications issued by Ministry of Finance, Department of
Revenue, Government of India:
(1) No: 47/2017-INTEGRATED TAX (RATE) DATED 14/11/17 for IGST
(2) No: 45/2017-CENTRAL TAX (RATE) DATED 14/11/17 for CGST
And,
IPR is entitled to avail tax benefit as per the following notifications issued by Finance Department, Government of
Gujarat:
(1) No. 45/2017-STATE TAX (RATE) DATED 15/11/17 for SGST
As per above notifications IPR will bear only 5% IGST for procurement of goods from outside Gujarat & 2.5% CGST
and 2.5% SGST (total 5%) for procurement of goods within Gujarat. Vendors are required to charge tax as per these
notifications while quoting/supplying the goods. Deviations, (if any) should be clearly mentioned in the
quotation/offer.
Please specify the HSN codes while quoting.
b) GST for Services:
As applicable. Specify the SAC codes wherever services are involved.
9. Earnest Money Deposit (EMD): Tenderer should furnish EMD if asked for by the Purchaser.
10. Delivery Date: Delivery period is essence of the Contract. Supplier must indicate the firm delivery date by which
the materials will be dispatched/delivered by them from the date of our order. Delivery period shall be clearly
indicated against each item separately.
An Aided Institute of Department of Atomic Energy, Government of India
परमाणु ऊर्ाा विभाग, भारत सरकार का एक सहायता प्राप्त संस्थान
प्लाज़्मा अनसुधंान ससं््थान
Bhat, Near Indira Bridge, Gandhinagar – 382428, Gujarat (INDIA)
Institute for Plasma Research )भाट, इनद्ीरा पलु के पास, गांधीनगर – 382428 , गुर्रात ( भारत
Phone: +91-79-23962021 to 23962028 ; Fax: +91-79-23962277 Website: www.ipr.res.in
11. Price/ Purchase Preference: Purchase/Price preference to industries will be given as per the policy of the
Government of India in force at the time of evaluation provided their offer is in compliance with the conditions of
the policy.
12. Liquidated Damages: The successful Vendor/Bidder should pay liquidated damages @ ½% (half percent) of the
total contract/order value for the delay of each week in the scheduled date of completion of the work envisaged in the
Contract/Purchase Order subject to a maximum of 5% (Five percent) of the total Contract/Order value. 13. Inspection: Materials on its arrival at IPR will be inspected by our Engineer/Stores Officer, and his decision in the
matter will be final. However, where the items are required to be inspected at the Suppliers Premises, Supplier has to
give advance notice to the Purchase regarding readiness of the material to enable Purchase/Stores section to depute
his representative for inspection.
14. Payment: Payment will be arranged for accepted materials only within 30 days from the date of receipt of materials
at IPR and bills in our accounts section, completed in all respects.
15. No correspondence will be entertained within 30 days from the date of receipt of material and bills, whichever is
later.
16. Guarantee: The Stores offered should be guaranteed for a minimum period of twelve months, from that date of
acceptance, against defective materials, design, workmanship, operation or manufacture. For defects noticed and
communicated during the Guarantee period, replacement/rectification should be arranged free of cost within a
reasonable period of such notifications. In case where our specifications call for a guarantee period more than 12
months specifically, then such a period shall apply.
17. Performance Bank Guarantee: If demanded by IPR, the successful bidder will have to furnish Performance Bank
Guarantee for 10% of the order value (basic price) from a Nationalised/Scheduled Bank/State Bank of India, valid
throughout the Guarantee/Warranty period. The scheduled banks approved by IPR are Axis Bank, HDFC Bank, ICICI
Bank and IDBI Bank. Bank Guarantees submitted other than from banks approved by IPR will not be accepted.
18. Security Deposit: If demanded the successful Bidder will have to furnish to the Purchaser an interest free security
deposit for 10% (Ten percent) of the order value in the form of Bank Guarantee of an equivalent amount from a
nationalized/ scheduled Bank/State Bank of India within 15 days from the date of LOI/Purchase order and the said
Guarantee should be valid till the goods are accepted by IPR. The scheduled banks approved by IPR are Axis Bank,
HDFC Bank, ICICI Bank and IDBI Bank. Bank Guarantees submitted other than from banks approved by IPR will
not be accepted. The Security deposit shall be forfeited in case the selected Bidder does not start the work within the
time limit specified or fail to complete the work within the stipulated delivery period or fail to comply with any of
the terms and conditions in the purchase order/contract. On successful completion of scope of work and its acceptance
by IPR, supplier should send a letter to the Purchase Officer to return the original BG.
19. The Contractor/Supplier shall at all times indemnify the purchase against all claims which may be made in respect of
the stores for infringement of any right protected by Patent Registration of design or Trade Mark and shall take all
risk of accidents or damage, which may cause failure of supply from whatever cause arising and the entire
responsibility for sufficiency of all means used by him for the fulfilment of the contract.
20. Free Issue Material (FIM ): Successful tenderer will have to arrange insurance showing beneficiary as “Institute for
Plasma Research” at their risk and cost towards adequate security for the materials/property provided/issued by the
Purchaser as Free Issue Material for the due execution of the contract.
21. The Director, IPR reserves the right to accept or reject any quotations fully or partly or to cancel the enquiry without
assigning any reason.
22. Jurisdiction: The contract shall be governed by the Laws of India for the time being in force. The Courts of
Gandhinagar only shall have jurisdiction to deal with and decide any legal or dispute arising out of this
Contract/Purchase Order.
(This need to be printed in Bidders letter head)
1. Please quote with complete technical details.
2. Quotation should be submitted with below (Quotation format) else IPR shall not consider the
offer submitted by the vendor for further evaluation
NAME OF PARTY :
ENQUIRY NO: DUE ON:
QUOTATION No. & DATE :
Currency of Quotation: Indian Rupees
Sr. No.
Item Description
HSN/
SAC
Code
Quantity
Unit
Rate (Basic)
Packaging &
forwarding
(P&F)
Applicable GST
Rate (incl P&F and GST)
Total Value
a b c d e= b+c+d f = a x e
1
2
3
4
Sr. No. PARTICULAR Remarks
I. Ex-works / FOR Destination
II. Freight
III. Insurance
IV. Delivery Period
V. Payment (IPR terms will apply)
VI. Guarantee / Warrantee
VII. Validity Period
VIII. Discount (if any)
IX. Remarks
Note: Enclose technical compliance sheet with your quotation Fill in
the all applicable details.
Place: Authority Signatory
Date: Company Seal
Bidder should submit the copy of GSTIN / ARN Certificate along with the offer
Bidder should specify the SUPPLY and SERVICE rates/ charges separately wherever applicable