This document and all the contents are © Sporting Bots Limited. No partof this may be reproduced in any form without prior written consent.

Disclaimer

Neither Sporting Bots Limited, nor anyone associated with Sporting Bots Limitedaccepts any responsibility whatsoever for any loss that may be sustained as aresult of the use (or misuse) of the UXT Bot, irrespective of how that loss mightbe sustained.

Sporting Bots Limited does not guarantee winnings and cannot be held liable forlosses resulting from the use of information obtained from within this documentor sites, or use of the UXT Bot.

Warning

Betting can be very risky and users should only speculate with money that theycan comfortably afford to lose, and should ensure that the risks involved are fullyunderstood, seeking advice if necessary.

WARNING – DO NOT UNDER ANY CIRCUMSTANCE RUN MORE THAN ONEVERSION OF THE UXT Bot. THIS COULD CONFUSE THE BOT AND CAUSEUNUSUAL BETTING PATTERNS – YOU HAVE BEEN WARNED.

Please read the terms and conditions

Please note: UXT needs the Microsoft .net V2.0 framework installed andalthough most pc’s have it installed as normal nowadays, yours may not.If you get any errors when you first try to run the UXT then it is likely this is theproblem.

To install the Microsoft .net V2.0 framework go to www.Google.co.uk do a searchfor “Microsoft .net V2.0” and the top link should be to Microsoft and thedownload. Make sure you are getting it from Microsoft. “Download details: .NETFramework Version 2.0 Redistributable ..."Click Here for the direct link although it doesn't always seems to work!

Welcome to our latest bot called UXT We hope you enjoy using this automatedsoftware as much as we do.

We are not going to kid you X-games trading is not the easiest way to makemoney but what sets it apart from normal trading is that it is constantly running24hrs a day and UXT will do the same day in day out (as long as betfair isrunning).

So you can test your scenario ideas against hundreds of hands in a matter ofhours rather than days or weeks.

As with all our bots UXT was developed from a user’s perspective by people whoactually use it.

We have tested this bot on thousands upon thousands of hands so we know itworks and we are making improvements all the time.

We have spent a lot of time creating a rules engine which we think is not onlyeasy to use but also gives you the flexibility to create very complex scenarios.

So whether you want to trade manually, trade semi manually (you place the firstbet) or totally automatic then UXT has to be the best choice.

As always with our bots we are open to suggestions for improvements so pleasetake the time to let us know if you would like to see any new options or features.

Best RegardsSporting Bots Limited.

Please note: UXT needs the Microsoft .net V2.0 framework installed andalthough most pc’s have it installed as normal nowadays, yours may not.If you get any errors when you first try to run the UXT then it is likely this is theproblem.

To install the Microsoft .net V2.0 framework go to www.Google.co.uk do a searchfor “Microsoft .net V2.0” and the top link should be to Microsoft and thedownload. Make sure you are getting it from Microsoft. “Download details: .NETFramework Version 2.0 Redistributable ..."Click Here for the direct link although it doesn't always seem to work!

Once you have received notification of your purchase you will receive a link to themember’s area of www.ultraxtrader.com

After entering the betfair usernames you wish to use with the software follow theinstructions on the download page and you are ready to begin.

Getting Started

The purpose of this guide is to get you started with the software as quickly aspossible yet giving you full detail about each function and all of the optionsavailable.

UXT can be as simple or as complex as you wish but we do recommend that youuse this guide to get you up and running and make sure you fully understand itscapabilities.

Firstly I would like to show you the basics

Upon first opening UXT you will be presented with the screen below.

Login

Select the login option from the action menu

Enter your betfair Username and Password.

Ensure that the tick box for the terms and conditions has been ticked and hit thelogin button. After a few seconds you will receive a confirmation prompt statingthat you have logged in successfully

Options menu

Here you can define your master software settings, these will be the same everytime you log into UXT

Username - You can save your Betfair username which will save you typing it inevery time you use the bot.

Percentage Complete - This is a very important feature of the bot and one thatmakes sure what you see in paper trading mode also reflects live mode.

If this option was set to “0” then you are telling the bot to place a bet themoment the round starts. Now in paper trading mode the bot will still register abet because it will see the price and register it as a bet, but in live mode this maynot be the case, because even though the bot is quick, it is probably not quickenough to take the prices at the first couple of seconds of the round which tendto be slightly different to the prices after a few seconds.

So we suggest to get a proper feel for how the bot will be have in real live youshould set this to at least 10 (10% into the round) however I would recommend30 (30% into the round)

Whatever you set this figure to paper trading will also use that value.

Audio Alerts -UXT allows you to set an audio alarm if certain criteria are metduring betting.

You can either use your own audio files or use the windows ones already on yoursystem. These are normally found in:

C:\WINDOWS\Media\

Clicking this button will allow you to browse to the .wav sound of yourchoice.

Clicking this button will allow you to test the sound.

Staking Key -If you have chosen to use staking here is where you enter theactivation code that you applied for in the members area ofwww.ultraxtrader.co.uk staking is explained in further detail later in this manual

Simulation mode -This is where you can toggle the historical data simulationmode on and off, this mode is explained in further detail later in this manual

UXT Games

There are 14 X-games that UXT has been designed to allow you to play.

Turbo Poker

Standard Poker

Turbo Black Jack

Standard Black Jack

Standard HiLo

HiLo (Side bets)

Turbo HiLo

Turbo HiLo(Side Bets)

Standard Baccarat

Baccarat (Side bets)

Turbo Baccarat

Turbo Baccarat (Side Bets)

Standard Omaha

Standard Omaha (Side bets)

These have been supplied as tabs.

You can play them all at once, one at a time or however you wish to play its up toyou.

Simply click on the tab of the game you wish to play.

Below is standard poker (Texas hold ‘em standard) in action on full auto mode

Before we go on and look at the in depth trading and rules options for the gameswe need to cover the overall UXT settings that affect all the games.

On the right hand side of UXT you will see the following information.

The top box shows you how much money you have transferred to your gamesaccount. You also have the ability to Paper Trade or Live trade if you wish to tryscenarios

Transfer Funds

There are two ways you can transfer money to your games account one of theminvolves logging into your betfair account and doing it manually but we havemade it easier by giving you an option within UXT.

Simply fill in the amount you wish to transfer from your main Betfair account.

Hit the transfer in button as highlighted above and the money will be moved fromyour sports account into your Xgames account. You can transfer funds out thesame way.

It is important to remember that this bank is used by all games, so if you areplaying more than one game make sure you have enough funds to cover all bets.

Skins

The skins feature allows you to customise the look of your bot.

PLEASE NOTE: Due to some unforeseen complications the skins feature has beendisabled for the moment but will be back soon!

Rules and bet configuration

Firstly in this section I will explain the options you can see and then go intofurther detail about how to make use of them.

The first thing you will probably notice is the “Start” button in the top left handcorner.

But please do not click this until you are ready and understand how the botworks. To do that it is important that you have a thorough understanding of thesettings panel.

(Going through the settings from left to right)

Accept - When you load in settings or change any settings within the rules panelthen you have to “Accept” the changes.

Load / Save – you can save Rules setting and reload them; this also means youcan share your settings with other people.

Mode - There is 3 modes of operation.

i. Manual. In this mode, you open a trade manually. I.e. youlay the 2nd favourite hand. The bot will immediately showyou the green-up information in the green trade out button.You can press that button anytime to trade-out.

ii. AutoTrade. In this mode, you open a trade manually butUXT will automatically trade out based on the profit and

stop/loss you have set up in the trading rules.

*If you decide to run UXT in “Manual” or AutoTrade please remember if you aretrading then you will have to set the stake high enough to make a successfultrade out. We find 2.75 is normally the minimum needed.

iii. FullAuto. In this mode, you set up UXT to place a tradebased on some rules and then the bot will automaticallytrade out. Theoretically this mode allows you to set up thebot and run without you sitting by the computer.Full auto can be as simple or complex as you like and iscovered in more detail a little later.

Staking

Warning: Staking can seriously increase your stake so be careful when using thisoption.

Click Enable to turn on staking.

Include new stake when staking- If you have this option turned on then UXTwill add your normal stake to any losses it is trying to recover

Lets have a look at some examples of how staking works.

If we have just laid a hand at the odds of 4.00 and placed the bet for £5.00 outtotal liability is £15.00 (4.00 -1 X 5).

If we now lose(the hand wins) we can use staking to speed up recovery of ourlosses.

Setting staking level to “1” means that you want to get all of your losses back onthe next hand so the bot would bet £15.00 and it would also include your normalstake of £5.00 if you have “Include new stake when staking” ticked.

As you can imagine you only need two or 3 losers and your stakes could build upto be quite large.

You may want to consider a longer run to make up your losses say around 3.

If you set Staking Level to 3.00 then it will take any losses and divide by 3. So inthe above example 15.00 / 3.00 makes your next stake £5.00, and it would alsoinclude your normal stake of £5.00 if you have “Include new stake when staking”ticked, making your next £15.00

This does tend to work better for lay betting where you are more likely to get awinning run of 4 or more.

Maximum number of losses (Max tries) – this tells the bot to make a certainnumber of attempts at recovering the loss. The idea behind this is to protect yourlosses should you suffer a losing streak

Setting up UXT bet settings

Manual Settings

Manual mode give you total manual control over the X games interface, similar toactually using the games site you may find that if you like to trade manually theUXT interface is faster and easier to use.

If you are using manual betting you need to set the stake you want to use whenyou make your first bet. Manual Settings is where you do it.

You can then place your bets by clicking on the back or lay box on the card orhand you wish to bet on

Once you have placed your bet you will then be shown in the green box on thelevel right hand side the trading or ”greening up” opportunities

Once you click the “green up” button your trading bet will be displayed in thewhite box below you initial bet and after a couple of seconds the figures underthe hand/card you have bet on will change green or red depending on weatheryour trade will make a profit or loss.

Auto trade settings

Auto trade is very similar to manual betting in the sense that the user must placethe intial bet, however with auto trade on you can ask the bot to find and placethe “greening up” bet for you based on the profit/loss settings in the tradeout box

Trade Out Settings.

These settings tell the bot when to trade out and they represent a positive andnegative figure and apply to autotrade and can also be used in full auto.

Profit Stop in this instance is for the minimum amount you want to make on thetrade.

Stop Loss in this instance is when you want to cut your losses on a trade

Full auto settings

PLEASE NOTE: Some of the options explained in this section are universal to allmodes these are:

Profit/Loss Stop

Continuous profit

Profit Stop – This represents a monetary value that you would like to win or themost you are prepared to lose and needs a little thought.

This works based on the amount of profit or loss in the session you are runningand will stop UXT from placing any more bets once this value has been met or

exceeded. I say exceeded because if a losing bet takes you over this limit thenUXT will stop betting however it cannot stop the bot from placing a bet that willexceed your limit after settlement of the market.

Continuous Profit -This is a way of locking in profit and is another uniquefeature of UXT. The way it works is that when activated if you hit your “ProfitStop” it resets your profit back down to “0” so it is like starting the bot again.

This will not affect your stop loss though, which will stay the same at all times.UXT will stop if it reaches or exceeds this figure.

This option allows you to run a scenario continuously making profit but onlystopping the bot if you reach your stop loss.

If you can imagine that you set profit to 100 and Profit loss to -10. Your scenariois working very well but it gets to 98 and then has 3 or 4 losses in a row whichthen takes you down to your stop loss and stops the bot. In effect you have lost98 worth of profit. If you set Continuous Profit to 10, then the bot will store theprofit each time you go over the 10. So you can only ever drop from 10 to -10.

Forward staking - Forward staking is the exact reverse of staking in the sensethat you are asking UXT to increase your stake each time you win and can onlybe used for backing in conjunction with the pattern/trend setup

So for example.You want to start PATTERN trend betting after 3 losses in a row and then hope forwin 3 in a row.

GetIn : LLLGetOut : WWW

Now, you are backing and want to use Forward Staking and I assume you startingwith a £2 bet.

So the first bet will be £2 and then the second bet will be £2 + profit from thefirst game and then the third bet will be £2 + profit1 + profit2. After 3 wins in arow, the bot gets out. However, if you lose first before the WWW pattern occurs,the bot will also stop. The idea here is that you are risking £2 for a potentiallylarge gain but your largest liability will be your first stake of £2.

Ladder stakes - Similar to the forward staking option ladder stakes is a way ofautomatically increasing your stake amounts but in a way such that is defined byyourself and is not governed by winning or losing scenarios

So for example:

I want to progressively increase my stake amounts for each bet I place starting at£2

So I would enter my ladder stakes like this

This will tell UXT to increase my stake by 50p each time I place a bet.

Warning: Forward staking and ladder stakes are forms of staking and canincrease your stake amounts considerably please use with caution

Tradeout settings - As mentioned above in the Auto trade section these settingscan be applied to your full auto setup so that UXT will “green up” automatically onthe bets placed by your automatic betting rules (explained later in the manual)

PLEASE NOTE. If you are using an automated system where you do not want to

trade out then please set tradeout Profit Stop to 9999 and Stop Loss -9999.

Trend / Pattern Settings - Trend settings are a great feature of UXT and allowyou to set up when the bot start or stops betting based on either profit and lossfrom the PL graph, a sequence of W (win) or L(lost) results or based on a movingaverage of the PL graph

You can select the trend/pattern that you wish to use from the dropdown menuas shown below

Here is how each trend setting works

PL - Let’s say that you had been watching a trend in paper trading mode and sawthat often the graph dropped to a figure of -40 and then began to recover andoften had 5 wins altogether after that.

Using PL you set “Get In:” to -40.00 and Get Out: to 10 (5 X £2 stakes).

UXT will now start betting when your trend hits -40 and bet until it makes £10(unless it hits one of your stop loss/win markers).

Pattern- Pattern works more on a Loss/Win sequence and allows you to tell UXTto look for certain sequences and if they appear then to begin betting

So for example you could look for 3 losers in a row “LLL” and then bet for just 1win “W” like so

Or you could combine patterns by adding a , (comma) in between your patternswhich acts like an OR statement

So for example you could tell UXT to look for LLL 3 losers in a row OR WWWW 4winners in a row to get in

And then get out after a W win OR L loss

So your setup would look like this

You can add as many get in and out combinations as you can fit in the box

Pattern in PL out -This is literally a combination of the 2 above trend settingsand can be useful if you prefer to make a certain amount of profit and then getout and wait for the sequence to appear again

So for example I want to get in after 3 losers LLL and stay in until I have made£10 so I would set the trend like this

Technical- This allows you to set up the moving average trends.

Moving average is based upon the idea that in any session (and in the Xgames ingeneral) there are trends that appear in the PL graph that we call “peaks andtroughs”. The moving average function allows you to set get in and out criteriabased upon this activity and works like this

When you select the technical option the T button will be highlighted, clicking thisbutton will open the moving average window

Firstly here you have 2 types of moving average.

Simple MA and Pure MA

Simple MA works like this ..

You will notice that when using trend settings that a blue line is created, we callthis the shadow PL. This is essentially what your PL would be if the trend was notactivated. Simple MA uses this line and creates a second red line to control thetrend on and off.

So for example:

If I’m using simple MA and I want UXT to create a moving average of 4 this willcreate a moving average line based on the results of 4 games

The MA line will follow the shadow PL line throughout the session. Now I want thebot to start betting if the shadow PL line shows a noticeable profit so I selectpositive tick in 2 and I want the bot to stop betting as soon as there is a negativetick (drop in profit) so I set the negative tick out to -1

Once the shadow PL line has risen 2 clear ticks above the MA line UXT will “get in”and begin to place bets, as the MA tracks the results of the bets the line willmove with it and as soon as the shadow PL line moves 1 clear tick below the MAline UXT will stop betting and wait for the sequence to begin again as shown inthe graph below

Pure MA is similar but works only based on the movements of the movingaverage line

So for example:

If I’m using pure MA I want UXT to “get in” as soon as the moving average lineshows a clear rise meaning I have the chance of generating a profit

Using a moving average of 4 again I want UXT to “get in” when the MA showspositive moment of 2 and get out as soon as the line drops 1 to the negative

As you can see the MA line controls the betting as opposed to the shadow PL

There are advantages to using both the simple and pure moving averages reallythe best way to find out which one will suit your strategy is to experiment.

There is a trend indicator below the account balance box on each game screen

------ = Trend off – no live bets placed

------- = Trend on – live bets placed

Setting up rules for Fullauto mode

As mentioned at the start of this manual, the UXT rules section can be as simpleor complex as you wish. Using the grid structure allows you to set multipleindependent rules for each market.

So first.. lets take a look at the grid and explain what each function does.

ActionType? - This field tells the bot what type of rule you want to use.

Action –UXT will place a bet based on these rules

And -This is a condition that must be met in order for the action to be executed.

Not- This is a condition that must not be met in order for the action to beexecuted.

These functions are based around what is happening during the round that theaction rule is being applied

So it’s like a command for UXT to work for example:

Here I am telling UXT to back the best ranked hand/card in round 2 between theodds range of 1 - 10 but only if the 2nd best ranked hand has won the last 2games in a row

In any rule, there must be at least one “Action” type for bets to be placed. Youcan have as many “And” and “Not” as you wish.

HandType- This field allows you to set a hand to play; you put the number in theRank/Index column

Index is the hand/card from top to bottom, so in poker hand1 is index 1 and inBaccarat it would be Dealer

Rank is slightly different and allows you to choose the hand/card you want to beton based on its price range. “Rank” sorts all hands from 1 to 8 (4 for poker) fromlowest price as 1 and highest price being 8. If you select a “Rank” of 2 then youare choosing the 2nd best price hand where as a “Rank” of 4 in poker is the worstpriced hand.

OnStand This is to be used with blackjack only, and is the betfair terminology forthe “twist or stick” “stick” type situations, this is best used as an AND rule.

Random UXT will bet on any hand within in your price range.

ForceTradeOut This function has been added following requests from someusers and is essentially a type of closeout where you can tell UXT to override yourstandard trade out settings in any round you specify in the rule and “force” thebot to tradeout

For example:

Here I am asking UXT to bet on hand/card 1 in round 2 and then force a trade inround 3 weather there is any profit or loss to be made

You have 3 options in staketype for forcetradeout highlighted below, each is selfexplanitory

PocketPair This feature has been added for poker players. It allows you to usean AND rule only to bet on a hand if it receives cards that are between yourselected range. Using the high odds and low odds fields pocket pair takes the

numbers you enter here and ties them to specific cards, the cards are numberedin the following sequence 1 = Ace – 13 = King

Here is an example of this rule: Here I have set the rules up to bet on thefavourite in round 1 but only if that hand is dealt cards between 8 and a king

BaccaratCardsRemaining This feature, as suggested by the name is for usewith baccarat only. Essentially it a “pocket pair” type AND rule but tailored forbaccarat.

This rule basically works on the cards remaining in the game, Baccarat is playedwith 8 decks of 412 cards, this rule is designed to look for a specific number ofcards to be left to trigger a bet.

Here is an example of this rule: As you can see I have set up the Action to bet onindex 1 in round 1 once the game reaches 312 cards remaining.

Round -Refers to the round to apply the rule

In Poker this would be:Deal – Round 1PreFlop – Round 2Flop – Round 3Turn – Round 4River – Round 5 although you can not bet on this round as this is when they arenormally settled.

In Black Jack this is simply round 1 to 7 (although some rounds are not alwaysused)

Get in/Out– This is a modification of the previous “winstreak” rule, and can workin 3 ways.

If you do not wish to use this in your rules enter a * in the box as shown below

1. Can be used to override the pattern settings and tell UXT to start betting if therule has had a win or loss streak in previous games

So for example: get in set to WWW and get out set to L will mean that the botwill start betting once the rule has won 3 times in a row and get out after a loss

2. Can be used as an AND rule

So for example: set up your standard index rule and add an AND with the roundnumber, get in set to WWW and get out set to * this will tell the UXT to bet ONLYif the rule has had a win streak in the specified round. This works the same forthe get out.

3. Can be used as a NOT rule

So for example: As above with the AND rule you can tell the GHB to bet only ifthe conditions are met in the specified round the NOT option will bet ONLY if theconditions were not met in the previous round

BetType- Back or Lay

LowOdds and HighOdds.- The odds range that the selection must fall betweenfor the rule to trigger a bet.

So if you set low odds to 1 and high odds of 5 then the bot will only bet when therules are met and the price is between these 2 values.

StakeType. You can either tell the UXT to stake a fixed amount or to liabilitywhich will be based on the odds.

Fixed amount may be £3.00 this means that weather backing or laying UXT willstake £3 on your selected hand/card

Liability £10. If the odds are 2.5 then UXT will make the following liabilitycalculation

10 / (2.5-1) = £6.66 stake.(betfair odds are always shown +1 which has to be taken off to get the actualodds on offer).

Stake/Liab. The value to stake or the liability (see above).

All rules in the grid can be governed by the pattern/trend settings and also themaster trade out settings if you wish, however these can also be turned off andjust your rules be used.

More on rules.

The rules engine has been created to make UXT as versatile as possible and hereare a few extra examples to help you get a feel of the system.

Let’s say for instance that we wanted to lay the second best priced hand on theflop between 3 and 4 but only if the best priced hand was below 2.00.

Here is how the setup would look on the rules panel.

Next we are going to add a “Not” which says the 4th rank hand must not be fewerthan 4.00

Here is how a rule can be combined with tradeout and pattern settings

Using UXT graphs

UXT has the ability to track your profit/loss in the form of a graph as shown below

As you can see from the key that goes with the graph there are several lines herethat explain the profit/loss data

Green = Actual Proft/loss

Blue = Shadow profit/loss – this is how your prfit/loss would be if thetrend/pattern settings were not on and is used in technical mode to control theget in and out rules.

Red = The moving average line, as explained above

Please note:

Due to modifications to the source code to incorporate new features and keepdown memory usage the graph now automatically resets itself to the most recentfigure after every 500 games.

You can now retrieve this graph by exporting the raw data out of UXT and into a.csv spreadsheet, the process is very simple and here is how to do it.

As you can see above there is a save PL graph button, this saves the graph datain text format

Please name your data and include the .csv extension at the end of title

Once you have done this navigate to the location of your csv file and open it inexcel

The data should look like this..

Once you have the data loaded up in excel , you can then generate the graph byhitting the graph button

Choose the type of graph you wish to display ( We prefer line graphs but it is upto you)

Once you have selected your graph options hit finish

Here is a full replica of your PL graph

Simulation mode

This feature is another more recent addition to UXT’s arsenal of tools and has hada revamp for the latest version 1.0.1.2.

Simulation mode allows you to run your rules and scenarios against historicaldata recorded by us for periods of 10 days and 30 days. This means that no moredo you need to spend weeks at a time paper trading your ideas, you can runthem against hours and hours of REAL Xgames data in a an extremely shorttimeframe.

The new data system has been clocked at running 30 days worth of data in just 1hour 30 mins… is that fast or what!

If you have not yet purchased the additional data these are sold in 2 increments

10 days and 30 days

There is a wealth of information regarding this in the member’s area ofwww.ultraxtrader.com

If you are a previous user who has purchased either the 1 day or 7 day packsyour account has been automatically upgraded

1 day users will now have 10 days

7 day users will now have 30 days.

Downloading the data

Once you have successfully logged into the members area the links will bedisplayed in the past data section.

The data is made available in 2 filetypes

Click on the links to the games you wish to download and the below message willappear

Hit save and select the path shown below

Select the simulated data folder and hit open, then save

Once you have downloaded the file/s your simulated data folder should look likethis

Setting UXT to simulation mode

Firstly log into UXT as normal and navigate to the options menu

Select the tick box as shown above, this enables the simulation modeOnce this has been done you can go back to the game screen you have chosenfor the simulation.

Loading the data into UXT

When back in the main game screen you will notice that there is a tick box anddrop-down menu for simulation. The drop down menu allows you to adjust thespeedThis allows you view games in milliseconds, for example selecting 5000 will allowyou to view the games at 5 seconds per round and so on.

So you have the choice of watching the games played out or select a lower figuresuch as 10 means that each round will take 10 milliseconds therefore runningdays worth of data very quickly.

As the data is already downloaded and stored in your simulated data folder youdo not need to do anything further except hit start and watch

Here is a screen shot of UXT simulation mode in action

We hope you find UXT as fun and practical as we doBest of luck and enjoy.

Sporting Bots Limited

Disclaimer

Anyone involved but not limited to the design, development, creation andtesting of this software and user manual is NOT RESPONSIBLE for anylosses you incur directly or indirectly due to the usage of this software.When you log into the software, you will be asked to accept another setof disclaimers that essentially say "use this software at your own risk".

No warranty is given or implied.