U N D E R F L O O R H E A T I N G C O N T R O L S

Technical Datasheet

Floor temperature sensor should be installed in a conduit, within a clear area of the floor, and away from any other temperature influences.

Thermotouch 9.2mG thermostat features a sleek black glass display and simple, manual underfloor heating controls

Thermotouch 9.2mG 5216

The 5216 is a manual thermostat that benefits from temperature control features that you would expect from a programmable thermostat, such as temperature limits and calibration

Lock the screen to prevent tampering by holding the up and down arrows for 5 seconds

Adjustable settings including temperature limits and temperature calibration to improve efficiency

Built in ambient temperature sensor and external floor sensor for accurate temperature management

Specially designed for accurate, manual control of electric underfloor heating systems

Benefit from simple on/off controls and easy, manual temperature adjustment

Technical Datasheet

Thermogroup EU

00353 (0)1 8660584www.thermogroupeu.com

Thermogroup AU

1300 368 631www.thermogroup.com.au

Thermogroup UK

01622 689 440www.thermogroupuk.com

Technical data

Wiring diagram

Box contents Dimensions (mm)

Supply voltage 230V 50/60Hz

Maximum load 16A (3600W)

Backup storage EEPROM (approx. 1 year backup)

Temperature range 5 ~ 80°C (0.5°C increments)

Accuracy ±0.5°C

Sensor rating NTC 10kΩ @ 25°C

Consumption 2W

Warranty 3 years

IP rating IP30

Width 85mm

Height 85mm

Depth 46mm (31mm in wall)

1 x Thermotouch 9.2mG

1 x Installation guide

1 x 3m floor temperature sensor probe

1 x 2m sensor conduit

2 x Fixing screws

1. Live - 230V supply

2. Neutral - 230V supply

3. Neutral - Underfloor heating

4. Live - Underfloor heating

5. Earth

6. Floor sensor (not polarity sensitive)

7. Floor sensor (not polarity sensitive)

7 6 5 4 3 2 1

°C

85

50

17 31 85