Thermocouple/RTDHand Held Thermometers

Features: Rugged ABS case and sealed keypad for an IP54 splash proof rating. Hold button freezes display for later reading. Easy to use, field calibration “capture” mode for improved system accuracy. Accuracy ±0.4°F(±0.2°C). Selectable °C or °F scale. Field calibration capability minimizes sensor errors. Thermometer accepts 100 ohm platinum RTD sensors. (sold separately)

Thermocouple Model 600-1040The thermocouple thermometer offers a max/min display anddifferential readings simultaneously using one or two sensorson selectable, easy read, multi-data LCD. Meter automaticallystores and adjusts for inherent sensor error.

RTD Model 600-1080The Platinum RTD Thermometer is an easy-to-use, minimally featured meter, ideal for your basic temperaturemonitoring applications. Four button keypad: On/Off, C/F for °C or °F scale, Hold and CAL. CAL button - easyone button, “capture” mode, or a single (ice) point field calibration offset. Field Calibration lockout featureprevents tampering and protects factory settings.

Specifications:Display: LCDOutput: InfraredPower: 2 AA Batteries (inc)Battery Life: 300 hrsLow Battery IndicatorDimensions:W = 3.3” (84mm)H = 6.2” (158mm)D = 1.2” (30mm)Shipping Weight:1 lb (0.5 kg)

Features: Max/Min, hold, °C or °F, Multi-Data LCD. Accepts 2 thermocouple inputs and either J, K, T or E thermocouples. Manually stores up to 25 readings in memory. T1/T2 differential. Accuracy to ±0.7°F (±0.4°C) plus ±0.1% of reading. UL, cUL approved for Class I, Div I; Groups ABCD hazardous (classified) locations. Meets CE requirements for electromagnetic compatibility. Rated IP54 for splash and dust resistance. ABS/polycarbonate impact resistant case Bright, easy-to-read LCD.

Specifications:Power: 2 AA BatteriesBattery Life: 750 hrsLow Battery IndicatorDimensions:W = 3.3” (84mm)H = 6.2” (158mm)D = 1.2” (30mm)Shipping Weight:1 lb (0.5 kg)

Sensor

Connection,

type

Platinum -58 to 302°F ±0.4°F 3-pin (round)RTD Thermometer (-50 to 150°C) (±0.2°C) 100-ohm platinum RTD

Range Accuracy Resolution

600-1080 0.1°

Model # Type

Model # Type Range Accuracy Resolution Functions Display

-328° to 1832°F

(-200° to 1000°C) ±0.7°F(±0.4°C) above -238°F(-150°C) 0.1° between On/off, hold, calibration

-418° to 2501°F plus ±0.1% of reading -238°F(-150°C) and 999.9° °C/°F,

-250° to 1372°C J-T-E-K, maximum, Three 4-digit LCD

-418° to 752°F minimum, differential, store, Displays: 0.4"H and 0.2"W

-250° to 400°C ±2°F(±1°C) below -238°F(-150°C) 1.0° below -238°F(-150°C) recall, display, resolution

-418° to 1832°F plus ±0.25% of reading 1.0° and 999.9°

-250° to 1000°C

600-1040

J

K

T

E

6-2February, 2006

Thermocoupleextension handle

Increase your sensorreach by 41”

Ideal for out-of-reach areas,such as ceiling air ducts.Extended to its full length, thistelescoping extension handleadds 41” to your detachablesensor (retracted length is 17”). Use with general-purpose,air/gas and surface detachable-sensors (not recommended forpiercing sensor). Features ABS plastic pistol-grip handle and ANSI colour-coded, 5-ft, PVC coiled cablewith miniconnector.

Accessories

Type J, K and T thermocouplethermometry kits

Everything you need for convenient field measurements- in one kit!Each kit includes on thermometer, three probes and acarrying case, These kits combine everything you need for field measurements - all in one convenient package! Choose your kit with type J, K and T thermocouple thermometer.

Your complete kit includes on thermometer (type J, K or T), three integral-handle sensors (air/gas, surface, and general-purpose), one 9V battery, instructions and carrying case. Sensors have 5-1/2” L glass-filled nylon handles. The 5-ft. coiled PVC cables are ANSI color-coded.

Hand-heldAccessories

Carrying case for allthermocouplethermometers

Designed to hold yourthermocouple thermometer andon sensor - this Cordura clothcase keeps everything togetherfor quick and convenient access.Order one durable case for eachof your thermometers!

Your thermometerkit includes thesethree integralhandle sensors...air/gas sensor...surface sensor...general- purpose sensor

6-3February, 2006

Digital Temperature TransmitterUniversally programmable, Head Mounting

Model T12.10.006

Electronic Temperature Measurement

• Universally programmable forRTD’sThermocouplesResistance-sensormV-sensor

• Output linear to temperature with input signal from RTD’sand thermocouples

• Analog output 4...20mA, invertable, 2-wire design• Signalling configurable for sensor burnout and sensor

short circuiting• C.S.A. intrinsically safe for hazardous locations,

Class I, Groups A, B, C, & D• Galvanic isolation• 100% Rh protection, moisture condensation permissible• Increased ambient temperature• PC-configurable, Windows-programme

Interesting facts about the T12 transmitter seriesThe digital temperature transmitter T12 range is designedfor universal industrial use.Comprehensive configuration possibilities: for example,type of sensor, measuring range and error signalling, reliable accuracy, galvanic isolation and EMI protection characterize these transmitters.

During configuration any one of 16 input signals can beselected. Measured temperatures are from -200°C up to +2300°C.

The following sensors can be connected:

• RTDs with 2, 3 and 4 lead connection, the connectionsystem used is configurable and ensures an optimallead wire compensation.

• thermocouples per IEC 584, DIN 43710 and ASTM E988Cold junction compensation (CJC) is built-in, the use ofan external CJC is selectable Via configuration.

• resistance-sensors up to 5 kW in 2, 3 and 4 lead connection, configurable compensation of the connection cable.

• mV sensors up to 800 mV.

Configuration is done by means of a standardDOS PC using the Configuration-Set. W ith theConfiguration Software the required parametersare defined. Data to the T12 is down loaded usinga Communication-Interface (Programming Unit).The bi-directional communication enables displaying the measured values on the PC.

Configuration can be done while the transmitter ismounted in the field. The Communication interface has an integral isolation barrier whichallows configuration while the transmitter is withinhazardous areas, and acts to protect the PC.Configuration sets are available as an optionalextra.

The transmitters are delivered with a basic configuration (see order information). Uponrequest, transmitters can alternatively be delivered with a customized configuration withinthe given limits.

6-4February, 2006

28

.5 m

m

33 mm

22

mm

6 mm Æ

49.5 m

m Æ

Dimensions in mm

-

+3

44

2

1

=

2

3

-

+

2

3

1

4

3

1

4

1

2

3

mV-sensor RTD / resistance-sensor thermocouple 4...20mA-loop

-

+

Designation of terminal connectors

Input

Load diagram

0

0

9 24 30(Ex)

36

UB in Volt

714

1000

1286

load RA in W

NoteThe permissible load isdependant upon theloop power supply voltage

*

*

* If cold junction compensation is used with an external RTD (2-lead connection)then terminal 1+ and terminal 4 -

6-5 February, 2006

Input configurable: type of sensor and measuring range max. measuring range min. measuring span(1)

RTD’sPt 100 EN 60 751 -200...+850ºC 25ºC

Ni 100 DIN 43760 : 1987-09 -60...+500ºC 25ºC

Thermocouples type T, Cu-CuNi IEC 584 -200...+400ºC 50ºC

type E, NiCr-CuNi IEC 584 -100...+1000ºC 50ºC

type J, Fe-CuNi IEC 584 -100...+1200ºC 50ºC

type L, Fe-CuNi DIN 43710 : 1985-12 -100...+900ºC 50ºC

type K, NiCr-Ni IEC 584 -180...+1372ºC 50ºC

type N, NiCr-Ni IEC 584 -180...+1300ºC 100ºC

type U, Cu-CuNi DIN 43710 : 1985-12 -200...+600ºC 75ºC

type R, PtRh-Pt IEC 584 -50...+1760ºC 200ºC

type S, PtRh-Pt IEC 584 -50...+1760ºC 200ºC

type B, PtRh-PtRh IEC 584 +400...+1820ºC 200ºC

type W3, W3Re/W25Re ASTM E988 0...+2300ºC 200ºC

type W5, W5Re/W26Re ASTM E988 0...+2300ºC 200ºC

Resistance-sensor 0...5 kW 30 WmV-sensor -10...800 mV 5 mV

RTD/resistance-sensor

accuracy 0.2ºC or 0.1ºC + 0.05% span, whichever is greater

sensor current approx. 0.2 mA

temperature coefficient withmeasuring span

< 100ºC or < 38.5 W ±0.01ºC /ºCT amb(2) or ±0.004 /ºCT amb(2)

> 100ºC or > 38.5 W ±0.01% of measuring span /ºC T amb(2)

lead wire connection configurable: 2-lead, 3-lead, 4-lead

max. permissible resistance of connection leads 30 each lead, 3-lead symmetric

lead wire effect < 0.02 / 10

signalling of sensor error configurable

Thermocouple

accuracy(4) 0.5ºC or 0.1ºC + 0.05% (3) span, whichever is greater

cold junction compensation < ± 1.0ºC

temperature coefficient

type T, E, J, L, K, N, Umeasuring span < 500ºC ±0.05ºC /ºCT amb(2)

measuring span > 500ºC ±0.05ºC /ºCT amb(2)

type R, S, B, W3, W5 0.2ºC /ºCT amb(2)

testing current to monitor sensor nom. 33 µA during testing cycle, otherwise 0 µA

signalling of sensor error configurable

mV-sensor

measuring deviation per DIN IEC 770, 23ºC ± 5ºC < 10 µV or 0.05% (3) whichever is greater

input resistance ³ 10MWAnalog output for measuring range configurable: 4 ... 20 mA or 20 ... 4 mA, 2-wire design

with type of sensor RTD’s linear to temperature per EN 60 751 / DIN 43 760 : 1987-09

with type of sensor thermocouples linear to temperature per IEC 584 / DIN 43 710 : 1985-12 / ASTM E988

by simulation mode independent from input signal,simulation value configurable from 4 mA up to 20 mA

output limits configurable

application specificaton configurable from 3.6 mA up to 21.5 mA

NAMUR NE 43 lower limit 3.8 mA upper limit: 20.5 mA

not active A lower limit 3.6 mA upper limit: 21.5 mA

load RA load RA £ (RB - 9V) / 0.021 A with RA in W and UB (5) in Volt

load effect < ±0.01% of measuring span / 100 Wmeasuring deviation per DIN IEC 770, 23ºC ± 5ºC < ±0.05% of measuring span

temperature coefficient < ±0.01% of measuring span /ºC

damping configurable: minimal 0.5s, 1 s up to 60 s

measured value update approximately 2/s

power supply effect < 0.005% of measuring span / V

Total measuring deviation for input and output per DIN IEC 770, 23ºC ± 5 °C

RTDs / resistance-sensor < 0.2 °C + 0.05%(6) or < 0.1 °C + 0.1% (6), whichever is greater

thermocouples < 0.05% + (0.5°C or 10µV or 0.05%), whichever is greater

mV-sensor < 0.05%(6) + (10µV or 0.05% (3)), whichever is greater

Signalling < 0.05%(6) + (10µV or 0.05% (3)), whichever is greater

analog output with sensor error or withinternal male-function

configurable

substitute value configurable from 3.5 mA up to 23.0 mA

up scale NAMUR NE 43 > 21.0 mA

down scale NAMUR NE 43 > 3.6 mA

Specifications

(1) beginning of measuring range maximum 50% of end of measuring range(2) T amb = ambient temperature

(3) of final value

(4) valid only for configurated measuring range with beginning ³ 0 ºC(5) UB = loop powersupply voltage, see power supply

(6) of measuring span

6-6February, 2006

Power supply UB

model T12.10.006 DC 9...36 V

maximum values for connection tocertified intrinsically safe circuits

Uo = 30V I K = 100mA P = 705mWsee certificate of conformity for additional data

Electromagnetic compatability (EMC) CE-conformity per DIN EN 50081-1 (March 93) and DIN EN 50082-2 (Feb 96)

Special features

isolation voltage (input versus analog output) 1500 VAC, 60 s

electric protection protected against reverse polarity

ambient and storage temperature

standard range -40...+85ºC

option: increased range min. -50ºC max. +105ºC

humidity100% relative humidity (unlimited with isolated sensor connection wires)

moisture condensation permissible IEC 68 2-30 Var. 2

vibration 10 ... 2000 Hz 5g DIN IEC 68 2-6

shock DIN IEC 68 2-27 gN = 30

salt fog DIN IEC 68 2-11

configuration and calibration data permanently stored in EFPROM

self-monitoringautomatic execution of initial test after connection to power supply ,

thereafter monitoring due to internal male-function

warm-up time approx 5 Min.

power consumption with UB, 24 V max. 552 mW

communication-interface Programming Unit (part of the configuration-set available as an accessory)

guarantee5 years for performance with standard range of ambient temperature,

legal warranty with enlarged range of ambient temperature

Case for head mounting

material plastic

cross section of terminal connections max 1.5 mm², screws captive

weight approx. 70 g

dimensions see drawings

Accessory Configuration-SetThe Configuration-Set contains • configuration Software (3.5” disk. Online Help) • connection cable. RS 232-C (9-pin sub-D-plug)• plug adapter (25-pin to 9 -pin sub-D-plug) • programming Unit (Communication-interface) incl. 9 V battery • connecton cable Programming Unit - T12

Receivingequipment

Input+

-

Hazardous area

T12.10.006

+

-

Safe area

Disconnectred

black

yellow*

green*

*Yellow and green are connected only ifconfiguration of the T12 is to be madeduring operation.

RS 232-C

ProgrammingUnit

COM

Mounting materialto use for mounting• in the top of connection head• on a measuring insert, spring-

loaded• on a standard rail

The wiring scheme shown below must be observed, particularly if the digital temperature transmitter series T12 is installed in the hazardous area.

6-7 February, 2006

6-8February, 2006

6-9 February, 2006

6-10February, 2006

6-11 February, 2006

6-12February, 2006

6-13 February, 2006

6-14February, 2006

6-15 February, 2006

6-16February, 2006

6-17 February, 2006

6-18February, 2006

6-19 February, 2006

6-20February, 2006

6-21 February, 2006

Fieldbus Temperature Transmitter Model T5350 B

Page 1 of 4WIKA Data Sheet TE 53.01 · 06/2004

WIKA Data Sheet TE 53.01

PROFIBUS PA Temperature transmitter, Model T42.10, see data sheet TE 42.01

Applications

Process industry Machinery, plant construction

Special Features

FOUNDATION™ Fieldbus ITR 4.01 PROFIBUS® PA Profile 3 Automatic switch between protocols Explosion protection, EEx i, intrinsically safe / FISCO Explosion protection, EEx n, FNICO

Description

Fieldbus Transmitter with FOUNDATION™ and PROFIBUS® PA Fieldbus Communication for temperature measurement with resistance thermometers and thermocouples.Difference, average or redundancy temperature measurement. Resistance and mV-measurements with or without customer specific linearisation of functions.

FOUNDATION Fieldbus with LAS-Functionality (Link Active Sche-duler) and PID-Regulation. This functionality allows for Master-independent regulations in the field device.

Polarity-independent bus connection.

Small dimensions, suitable for DIN form B sensor head moun-ting.

Delivered with a basic configuration (according to the ordering options) or customer specific configuration in line with the configuration options.

Fieldbus Temperature TransmitterModel T5350, for FOUNDATION Fieldbus and PROFIBUS PA

ElectricalTemperature Measurement

6-22February, 2006

Specifications Model T5350

Input configurable Sensor Measuring range Standard Resistance thermometer Pt25 ... Pt1000 -200 °C ... +850 °C IEC 60 751/JIS C

Pt25 ... Pt1000 -200 °C ... +850 °C IEC 60 751/JIS C1604Ni25 ... Ni1000 -60 °C ... +250 °C DIN 43 710Cu10 ... Cu1000 -50 °C ... +200 °C α = 0,00427

Thermocouples B +400 °C ... +1820 °C IEC 584E -100 °C ... +1000 °C IEC 584J -100 °C ... +1200 °C IEC 584K -180 °C ... +1372 °C IEC 584L -200 °C ... +900 °C DIN 43 710N -180 °C ... +1300 °C IEC 584R -50 °C ... +1760 °C IEC 584S -50 °C ... +1760 °C IEC 584T -200 °C ... +400 °C IEC 584U -200 °C ... +600 °C DIN 43 710W3 0 °C ... +2300 °C ASTM E988-90W5 0 °C ... +2300 °C ASTM E988-90

External CJC (cold junction compensation) -40 °C ... +135 °C Resistance sensor 0 ... 10 k Ω Potentiometric resistance sensor 0 ... 100 k Ω mV - sensor -800 ... +800 mV Basic configuration Pt100, 3 wire 0 °C ... 100 °C Sensor current typically 0.2 mA Max. cable resistance 50 Ω per wire Accuracy, at 24 °C ± 4 K Sensor Base accuracy Temperature coefficient

Pt100 und Pt1000 ≤ ± 0.1 °C ≤ ± 0.002 °C / °CNi100 ≤ ± 0.15 °C ≤ ± 0.002 °C / °CCu10 ≤ ± 1.3 °C ≤ ± 0.02 °C / °CLin. R. ≤ ± 0.05 Ω ≤ ± 0.002 Ω / °CVolt ≤ ± 10 µV ≤ ± 0.2 µV / °CTE-Typ: E, J, K, L, N, T, U ≤ ± 0.5 °C ≤ ± 0.01 °C / °CTE-Typ: B, R, S, W3, W5 ≤ ± 1 °C ≤ ± 0.025 °C / °C

Error cold junction compensation (CJC) ± 0.5 °COutput FOUNDATION™ Fieldbus PROFIBUS ® PA Version Version ITK 4.51 EN 50 170 vol. 2 / profile 3 Functionality Basic or LAS Fieldbus function blocks 2 analogue and 1 PID 2 analogue Execution time, PID-controller < 200 msPower supply S upply voltage 9 ... 32 VDC (maximum values specified in the type-examination certificate are to be observed) Current consumption < 11 mAExplosion protection Model 5350 B Model 5350 A d protection (ATEX) Zone 0/1, category 1G, 2G Zone 1, category 2G Zone 2, category 3G

Ignition protection type EEx ia IIC T4/T5/T6 EEx ib IIC T4/T5/T6 EEx nA[L] IIC T4/T5/T6EC- type-examination certificate KEMA 02 ATEX 1318 KEMA 03 ATEX 1011X

FM IS, Class I, Division 1, Group A, B, C, DNon-Incendive, Class I, Division 2, Group A, B, C, D

Non-Incendive, Class I,Div. 2, Group A, B, C, D

Installation Drawing 5350QE01 5350QE01

ULClass I, Division 2, Group A, B, C, DClass I, Zone 0 & 1 Group IIC,Class II, Division 1, Group E, F & G

Class 1, Division 2,Group A, B, C, DCl. I, Zone 2 Group IIC

CSA IS, Class I and II, Division 1,Groups A, B, C, D, E, F, G

IS, Class I, Div.2,Groups A, B, C, D

Non-Incendive, Class I,Div.2, Group A, B, C, D

Certificate No. 1418937 1418937Maximum values for connectionof the current loop circuit

Po< 0.84 W

Po< 1.3 W FISCO FISCO Po

< 5.32 W FISCO FNICO

S upply voltage Ui 30 VDC 30 VDC 17,5VDC

15 VDC 30 VDC 17.5VDC

32 VDC Ampacity Ii 120 mA 300 mA 250 mA 250 mA Power rating Pi 0.84 W 1.3 W 2.0 W 5.32 W Internal capacitance Ci 2 nF 2 nF Internal inductance Li 1 µH 1 µH Medium temperature/ ambient temperature

T4: < 85°CT5: < 75°CT6: < 60°C

T4: < 75°CT5: < 65°CT6: < 45°C

T4: < 85 °CT5: < 75 °CT6: < 60 °C

T4: < 85 °CT5: < 75 °CT6: < 60 °C

T4: < 85 °CT5: < 75 °CT6: < 60 °C

Maximum values for connectionof the sensor circuit

S upply voltage Uo 5.7 V Ampacity Io 8.4 mA Power rating Po 12 mW Capacitance Co 40 µF Inductance Lo 200 mH

6-23 February, 2006

Designation of terminal connectors

2099

318.

011 Sensor

2 Sensors

Potentiometric sensor

Further specifications Model T5350

Electromagnetic compatibility (EMC) per EMC Directive 89/336/EWG DIN EN 61 326:2002and NAMUR NE 21

Ambient conditions Ambient and storage temperature Standard range: -40 … +85 °C Maximum permissible humidity 95 % relative humidity, without moisture condensation Vibration 2 … 100 Hz 2 g DIN EN 60 068-2-6Special features Isulation voltage, test / operation 1.5 kVAC / 50 VAC Response time (programmable) 1 ... 60 s Updating time < 400 msCase Head mounting design, incl. spring-loaded mounting screws Material Plastic, PBT, glass fibre reinforced Ingress protection case IP 50 IEC 529 / EN 60 529

terminalconnections

IP 00 IEC 529 / EN 60 529 Cross section of terminal connectors 0.14 … 1.5 mm² Weight Approx. 0.05 kg

Clamp 1 and 2: Connection FOUNDATION™ Fieldbus or PROFIBUS® PA (protected against reverse polarity)

6-24February, 2006

2099

288.

01

1) Basic configuration: Pt100, 3 wire, 0 ... 100 °C2) Please pay attention to the sensors and the limits of measuring ranges on page 2.

Ordering information

WIKA Alexander Wiegand GmbH & Co. KGAlexander-Wiegand-Straße 3063911 Klingenberg/GermanyPhone (+49) 93 72/132-0Fax (+49) 93 72/132-406E-Mail info@wika.dewww.wika.de

Specifications and dimensions given in this leaflet represent the state of engineering at the time of printing.Modifications may take place and materials specified may be replaced by others without prior notice.

Dimensions in mm

Screw M4approx. 30 mm spring-loaded

Field No. Code Features

Explosion protectionA II 3 G EEx nA[L] II C T4/T5/T6, CSA/FM/UL Division 2

1 B II 1 G EEx ia IIC / II 2 G EEx ib IIC T4/T5/T6, CSA/FM/UL Division 1Measuring range

GK basic configuration 1)

5 KK customer’s specification 2) please state as additional text

Additional order infoYES NO

6 T Z additional text Please state as clearly understandable text!

Order code:

1 2 3

T5350 - -

Additional text:

6-25 February, 2006