Upload
omana
View
115
Download
7
Tags:
Embed Size (px)
DESCRIPTION
Thermochemistry Notes. I. Thermochemistry deals with the changes in energy that accompany a chemical reaction. Energy is measured in a quantity called enthalpy , represented as H . The change in energy that accompanies a chemical reaction is represented as H . Page 519. - PowerPoint PPT Presentation
Citation preview
Thermochemistry Notes
I. Thermochemistry deals with the changes in energy that accompany a chemical reaction. Energy is measured in a quantity called enthalpy, represented as H. The change in energy that accompanies a chemical reaction is represented as H. Page 519
a. The energy absorbed or released as heat in a chemical or physical change is measured in a calorimeter. In one kind of calorimeter, known quantities of reactants are sealed in a reaction chamber, which is immersed in a known quantity of water in an insulated vessel. Therefore, the energy given off (or absorbed) during the reaction is equal to the energy absorbed (or given off) by the known quantity of water. The amount of energy is determined from the temperature change of the known mass of surrounding water.
Calorimeter
Using the change in temperature, T, determined from calorimeter one can use the following equation to determine the quantity of energy gained or lost during the reaction or for a physical change:
q = (cp)(m)(T)T in kelvinq represents the energy lost or gained (in
J)m is the mass of the sample (in g)cp is the specific heat of a substance at a
given temperature pg513
• Practice Problem: 1. How much heat energy is needed to raise the temperature of a 33.0 gram sample of aluminum from 24.0C to 100.C?
• 2. Determine the specific heat of a material if a 35 g sample absorbed 96 J as it was heated from 293K to 313K.
• 3. During a chemical reaction carried out in a calorimeter the temperature of water within the calorimeter raised from 24.0C to 125C. If 250. grams of water were present calculate the amount of heat energy the water gained.
b. In thermochemical equations the quantity of energy released or absorbed as heat during a reaction is written and is represented by H.
Example: 2H2(g) + O2(g) 2H2O(l) H= - 571.6 kJ/mol
c. H can be used to determine if the reaction is exothermic or endothermic. If the H value of an equation is negative that represents an exothermic reaction. (Meaning energy is released, therefore the energy of the products would be less.)
If the H value of an equation is positive that represents an endothermic reaction. Example:
2H2(g) + O2(g) 2H2O(g)
H= - 483.6 kJ/mol H reactants = 1450.8 kJ/mol H products = 967.2 kJ/mol
Type of Reaction: Exothermic
2H2O(g) 2H2(g) + O2(g)
H= + 483.6 kJ/mol H reactants = 967.2 kJ/mol
H products = 1450.8 kJ/molType of Reaction: Endothermic
d. Hess’s law provides a method for calculating the H of a reaction from tabulated data. This law states that if two or more chemical equations are added, the H of the individual equations may also be added to find the H of the final equation. As an example of how this law operates, look at the three reactions below.
(1) 2H2(g) + O2(g) 2H2O(l)H = 571.6 kJ/mol
(2)2H2O2(l) 2H2(g) + 2O2(g)H = +375.6 kJ/mol
(3)2H2O2(l) 2H2O(l) + O2(g)H = ? kJ/mol
When adding equations 1 and 2, the 2 mol of H2(g) will cancel each other out, while only 1 mol of O2(g) will cancel.
(3)2H2O2(l) 2H2O(l) + O2(g)H = ? kJ/mol
Warm-up• What type of energy and energy transfer do you see in this picture•Thank you Ms. Bouwman (from McNeil High School) for this wonderful power point!
Basic Thermochemistry
Courtesy of lab-initio.com
Energy is the capacity to do work
• Thermal energy is the energy associated with the random motion of atoms and molecules
• Chemical energy is the energy stored within the bonds of chemical substances
• Nuclear energy is the energy stored within the collection of neutrons and protons in the atom
• Electrical energy is the energy associated with the flow of electrons
• Potential energy is the energy available by virtue of an object’s position
6.1
Heat (Enthalpy) Change, ΔHDefinition:Definition: The amount of heat energy released or The amount of heat energy released or absorbed during a process.absorbed during a process.
EnergyEnergyEnergy is the capacity to do workEnergy is the capacity to do work, and can take many forms
Potential energy is stored energy or the energy of position Kinetic energy is the energy of motion Thermal energy (heat) is an outward manifestation of movement at the atomic level
Heat is the transfer of thermal energy between two bodies that are at different temperatures.
Energy Changes in Chemical Reactions
Temperature is a measure of the thermal energy.
Temperature = Thermal Energy
900C400C
greater thermal energy6.2
Heat
The flow of thermal energy from one object to another.
Heat always flows from warmer to cooler objects.
Ice gets warmer while
hand gets cooler
Cup gets cooler while hand gets
warmer
3 Types of Heat Transfer• Radiation- the transfer of energy by
electromagnetic waves. • Convection – Transfer of energy by currents• Conduction – Transfer of energy by touching
objects
Exothermic process is any process that gives off heat – transfers thermal energy from the system to the surroundings.
Endothermic process is any process in which heat has to be supplied to the system from the surroundings.
2H2 (g) + O2 (g) 2H2O (l) + energy
H2O (g) H2O (l) + energy
energy + 2HgO (s) 2Hg (l) + O2 (g)
6.2
energy + H2O (s) H2O (l)
Exothermic ProcessesExothermic Processes
Reactants Reactants Products + energy Products + energy
Processes in which energy is released as it proceeds, and Processes in which energy is released as it proceeds, and surroundings become warmersurroundings become warmer
Endothermic ProcessesEndothermic Processes
Reactants + energy Reactants + energy Products Products
Processes in which energy is absorbed as it proceeds, Processes in which energy is absorbed as it proceeds, and surroundings become colderand surroundings become colder
Water phase changesTemperature remains __________ during a phase change.constant
Phase Change DiagramPhase Change DiagramProcesses occur by addition of energy Processes occur by addition of energy Processes occur by removal of energyProcesses occur by removal of energy
Thermochemical Calculations
Units for Measuring HeatThe JouleJoule is the SI system unit for measuring heat:
The caloriecalorie is the heat required to raise the temperature of 1 gram of water by 1 Celsius degree
2
2111smkgmeternewtonJoule
Joulescalorie 18.41
Specific HeatSpecific Heat
The amount of heat The amount of heat required to raise the required to raise the temperature of one temperature of one gram of substance by gram of substance by one degree Celsius.one degree Celsius.
1
2
3
45 6
7
8
9
1 102
3
45 6
7
8
9
11
Specific Heat (cp, sometimes s, but usually c)
Things heat up or cool down at different rates.
Land heats up and cools down faster than water, and aren’t we lucky for that!?
Specific heat is the amount of heat required to raise the temperature of 1 kg (but in Chem we use g) of a material by one degree (C or K, they’re the same size).
Cp water = 4184 J / kg C (“holds” its heat)
Cp sand = 664 J / kg C (less E to change)
This is why land heats up quickly during the day and cools quickly at night and why water takes longer.
Calculations Involving Specific Heat
ccpp = Specific Heat
QQ = Heat lost or gained
TT = Temperature change
OROR
mm = Mass
TmQcp
pcTmQ
Specific HeatSpecific HeatThe amount of heat required to raise the temperature of one gram of substance by one degree Celsius.
SubstanceSubstance Specific Heat (J/g·K)Specific Heat (J/g·K)Water (liquid) Water (liquid) 4.184.18Ethanol (liquid) Ethanol (liquid) 2.442.44Water (solid) Water (solid) 2.062.06Water (vapor) Water (vapor) 1.871.87Aluminum (solid) Aluminum (solid) 0.8970.897Carbon (graphite,solid) Carbon (graphite,solid) 0.7090.709Iron (solid) Iron (solid) 0.4490.449Copper (solid) Copper (solid) 0.3850.385Mercury (liquid) Mercury (liquid) 0.1400.140Lead (solid)Lead (solid) 0.1290.129Gold (solid) Gold (solid) 0.1290.129
The specific heat (s) of a substance is the amount of heat (q) required to raise the temperature of one gram of the substance by one degree Celsius.
The heat capacity (C) of a substance is the amount of heat (q) required to raise the temperature of a given quantity (m) of the substance by one degree Celsius.
C = ms
Heat (q) absorbed or released:
q = mst
q = Ct
t = tfinal - tinitial
6.4
Specific Heat CapacitySpecific Heat Capacity
If 25.0 g of Al cool from 310 If 25.0 g of Al cool from 310 ooC to 37 C to 37 ooC, how many joules of heat C, how many joules of heat energy are lost by the Al?energy are lost by the Al?
heat gain/lose = q = (c)(mass)(∆T)
where ∆T = Twhere ∆T = Tfinalfinal - T - Tinitialinitial
q = (0.897 J/g•K)(25.0 g)(37 - 310)Kq = (0.897 J/g•K)(25.0 g)(37 - 310)Kq = - 6120 Jq = - 6120 J
Notice that the negative sign on q signals heat “lost by” or transferred OUT Notice that the negative sign on q signals heat “lost by” or transferred OUT of Al.of Al.
How much heat is given off when an 869 g iron bar cools from 940C to 50C?
s of Fe = 0.444 J/g • 0C
t = tfinal – tinitial = 50C – 940C = -890C
q = mst = 869 g x 0.444 J/g • 0C x –890C = -34,000 J
6.4
CALORIMETRY
CalorimetryThe amount of heat absorbed or released during a physical or chemical change can be measured, usually by the change in temperature of a known quantity of water in a calorimetercalorimeter.
Constant-Volume Calorimetry
No heat enters or leaves!
qsys = qwater + qbomb + qrxn
qsys = 0
qrxn = - (qwater + qbomb)
qwater = mst
qbomb = Cbombt
6.4
Reaction at Constant V
Constant-Pressure Calorimetry
No heat enters or leaves!
qsys = qwater + qcal + qrxn
qsys = 0
qrxn = - (qwater + qcal)
qwater = mst
qcal = Ccalt
6.4
Reaction at Constant P
First, some heat from reaction warms the water, which we know the mass of and “c” for…
qwater = (c)(water mass)(∆T)THEN, some heat from reaction warms “bomb,” which has a known specific heat for the entire apparatus (typically), so we don’t need the mass…qbomb = (heat capacity, J/K)(∆T)
Total heat evolved = qtotal = qwater + qbomb
BOOM! Combustible material ignited BOOM! Combustible material ignited at constant volume! This heats up the at constant volume! This heats up the “bomb”, which heats up the water “bomb”, which heats up the water surrounding it…surrounding it…
PracticeA sample of iron metal is added to 75.00 grams of water originally at 35.0°C in a calorimeter. The final temperature of the metal and water in the calorimeter is measured to be 95.0°C.
a) Describe the transfer of heat energy that occurs in the calorimeter.
(b) Assuming no heat is lost to the outside, how many joules of heat energy are transferred?
ENTHALPY (H)
Phase Change DiagramPhase Change Diagram
D
A
C
B
E
Changing Phase• Heat of Fusion - heat change for freezing and
melting• Heat of Vaporization – heat change for condensation
or evaporationFor Water: Heat fusion = 340 J/g Heat vaporization = 2,300 J/g
Heat = (mass)(heat of fusion or vaporization)
How many joules of heat are necessary to melt 500g of ice at its freezing point?= 500g * 340J/g= 170,000 J or 170KJ
Enthalpy (H) is used to quantify the heat flow into or out of a system in a process that occurs at constant pressure.
H = H (products) – H (reactants)
H = heat given off or absorbed during a reaction
Hproducts < Hreactants
H < 0
Hproducts > Hreactants
H > 0 6.3
∆∆HHffoo, standard molar enthalpy of , standard molar enthalpy of
formationformation∆∆HHff
o o = Enthalpy change when 1 mol of compound is formed = Enthalpy change when 1 mol of compound is formed from the corresponding elements under standard from the corresponding elements under standard conditionsconditions
HH22(g) + 1/2 O(g) + 1/2 O22(g) --> H(g) --> H22O(g)O(g)
∆∆HHffoo (H (H22O, g)= -241.8 kJ/molO, g)= -241.8 kJ/mol
Decomposition
• ∆∆HHffo o may also be used to calculate the may also be used to calculate the
decomposition of somethingdecomposition of something
• If …If …HH22(g) + 1/2 O(g) + 1/2 O22(g) --> H(g) --> H22O(g) ∆HO(g) ∆Hff˚ = - 242 kJ/mol˚ = - 242 kJ/mol
Then…Then…HH22O(g) --> HO(g) --> H22(g) + 1/2 O(g) + 1/2 O22(g) ∆H(g) ∆Hff˚ = + 242 kJ/mol˚ = + 242 kJ/mol
Enthalpy ValuesEnthalpy Values
• Depend on Depend on how the reaction is writtenhow the reaction is written and on phases of reactants and on phases of reactants and products…and products…
HH22(g) + 1/2 O(g) + 1/2 O22(g) --> H(g) --> H22O(g)O(g)
∆∆H˚ = -242 kJH˚ = -242 kJ
2 H2 H22(g) + O(g) + O22(g) --> 2 H(g) --> 2 H22O(g)O(g)
∆∆H˚ = -484 kJH˚ = -484 kJ
HH22O(g) ---> HO(g) ---> H22(g) + 1/2 O(g) + 1/2 O22(g) (g)
∆∆H˚ = +242 kJH˚ = +242 kJHH22(g) + 1/2 O(g) + 1/2 O22(g) --> H(g) --> H22O(liquid)O(liquid)
∆∆H˚ = -286 kJH˚ = -286 kJ
Huh? So what’s that mean?
To convert 1 mol of water to 1 mol each of To convert 1 mol of water to 1 mol each of HH22 and CO and CO requiresrequires 131 kJ of energy. 131 kJ of energy.
Since delta H is positive, the “water gas” reaction is Since delta H is positive, the “water gas” reaction is
ENDOthermicENDOthermic
6.4
6.5
A problem… Using Standard A problem… Using Standard Enthalpy ValuesEnthalpy Values
Calculate the heat of combustion of methanol, i.e., Calculate the heat of combustion of methanol, i.e., ∆H∆Hoo
rxnrxn for for
∆ ∆HHoorxnrxn = = ∆H ∆Hff
oo (prod) - (prod) - ∆H ∆Hff
oo (react)(react)
CHCH33OH(g) + 3/2 OOH(g) + 3/2 O22(g) --> CO(g) --> CO22(g) + 2 H(g) + 2 H22O(g)O(g)
∆∆HHffoo
CHCH33OH = -238.6 KJ/molOH = -238.6 KJ/mol ∆H ∆Hffoo
COCO22 = -393.5 = -393.5
∆∆HHffoo
OO22 = 0 KJ/mol = 0 KJ/mol ∆H∆Hffoo
HH22O = -285.8O = -285.8
= -238.6 – (-393.5 + -285.8)= -238.6 – (-393.5 + -285.8)= 442.7 KJ/mol= 442.7 KJ/mol
PracticeGiven the following heats of formation:
NaCl(s): DH(f)= -400 kJ
H2SO4(l): DH(f)= -800 kJ
Na2SO4(s): DH(f)= -1400 kJ
HCl(g): DH(f)= -90 kJ
a) Find the heat of reaction of the following chemical change:2NaCl(s) + H2SO4 --> Na2SO4(s) + 2HCl(g)
b) Is this reaction exothermic or endothermic?
Energy Stoichiometry
• Remember…1. In an equation coefficients mean moles!2. To go from grams to moles divide by molar mass3. To go from moles to grams multiply my molar
mass4. Make sure you use the right energy units KJ vs. J5. Double check the sign of your energy, is it
endothermic or exothermic
Practice
P4 (s) + 5O2 (g) P4O10 (s) H = -3013 kJ
266 g P4
1 mol P4
123.9 g P4
x 3013 kJ1 mol P4
x = 6470 kJ
How much heat is evolved when 266 g of white phosphorus (P4) burn in air?
PracticeThe burning of magnesium is a highly exothermic reaction.2Mg(s) + O2(g) --> 2MgO(s) + 1500 kJ
Use the thermochemical equation to calculate the energy change in kilojoules when 0.5 mol of Mg burn in an excess of O2.
You try
• Calculate the change in H when 32g of NO decomposes?– ½ N2 (g) + ½ O2 (g) NO (g) ∆H∆Hff˚ = ˚ = 90.2 kJ
Using Standard Enthalpy Using Standard Enthalpy ValuesValuesUse ∆H˚’s to calculate Use ∆H˚’s to calculate enthalpy changeenthalpy change for for
HH22O(g) + C(graphite) --> HO(g) + C(graphite) --> H22(g) + CO(g)(g) + CO(g)
• When calculating ∆H information from several ∆H information from several equations is neededequations is needed
And then…
HH22O(g) + C(graphite) --> HO(g) + C(graphite) --> H22(g) + CO(g)(g) + CO(g)
From either givens From either givens within the problem or reference within the problem or reference
books and tables we can find…books and tables we can find…
• HH22(g) + 1/2 O(g) + 1/2 O22(g) --> H(g) --> H22O(g) ∆HO(g) ∆Hff˚ = - 242 kJ/mol˚ = - 242 kJ/mol
• C(s) + 1/2 OC(s) + 1/2 O22(g) --> CO(g)(g) --> CO(g) ∆H ∆Hff˚ = - 111 kJ/mol˚ = - 111 kJ/mol
And and then… we add ‘em.HH22O(g) --> HO(g) --> H22(g) + 1/2 O(g) + 1/2 O22(g) ∆H(g) ∆Hoo = +242 kJ = +242 kJ
C(s) + 1/2 OC(s) + 1/2 O22(g) --> CO(g)(g) --> CO(g) ∆H∆Hoo = -111 kJ = -111 kJ -----------------------------------------------------------------
-------HH22O(g) + C(graphite) --> HO(g) + C(graphite) --> H22(g) + CO(g)(g) + CO(g)
∆∆HHoonetnet = +131 kJ = +131 kJ
• Positive delta H means?
Warm-Up
• Calculate the change in H when 64g of NO is formed?– ½ N2 (g) + ½ O2 (g) NO (g) ∆H∆Hff˚ = ˚ = 90.2 kJ
Enthalpy Day 2
H2O (s) H2O (l) H = 6.01 kJ
1. The coefficients always refer to the number of moles of a substance
Things to remember about Thermochemical Equations
2. If you reverse a reaction, the sign of H changes
H2O (l) H2O (s) H = -6.01 kJ
3. If you multiply both sides of the equation by a factor n, then H must change by the same factor n.
2H2O (s) 2H2O (l) H = 2 x 6.01 = 12.0 kJ
6.3
H2O (s) H2O (l) H = 6.01 kJ
4. The physical states of all reactants and products must be specified in thermochemical equations.
Thermochemical Equations
6.3
H2O (l) H2O (g) H = 44.0 kJ
What if you have limited information?Calculate the enthalpy of the reaction: 2 NO(g) + O2(g) --> 2 NO2(g)
Given the following reactions and enthalpies of formation:½ N2(g) + O2(g) --> NO2(g) ∆∆ H = 33.2 kJ½ N2(g) + ½ O2(g) --> NO(g) ∆∆ H = 90.2 kJ
2 NO(g) + O2(g) --> 2 NO2(g)2/2 N2(g) + 2 O2(g) --> 2 NO2(g) ∆∆ H = 33.2 kJ *2
2 NO(g) --> 2/2 N2(g) + 2/2 O2(g) ∆∆ H = - 90.2 kJ * 2
-114 kJ
+
You try…Calculate the enthalpy of the reaction: 4B(s)
+3O2(g) --> 2B2O3(s)
Given the following information:B2O3(s) + 3H2O(g) --> 3O2(g) + B2H6(g) ∆ ∆ H = +2035 kJ2B(s) + 3H2(g) --> B2H6(g) ∆ ∆ H = +36 kJH2(g) + ½ O2(g) --> H2O(l) ∆∆ H = -285 kJH2O(l) --> H2O(g) ∆∆ H = +44 kJ
Equilibrium and
Le Chatelier’s Principle
Chemical Equilibrium
Reversible ReactionsReversible Reactions: : A chemical reaction in which the A chemical reaction in which the
products can react to re-form the products can react to re-form the reactantsreactants
Chemical EquilibriumChemical Equilibrium: : When the rate of the forward reactionWhen the rate of the forward reactionequals the rate of the reverse reactionequals the rate of the reverse reactionand the concentration of products andand the concentration of products andreactants remains unchangedreactants remains unchanged
2HgO(s) 2Hg(l) + O2(g) Arrows going both directions ( ) indicates equilibrium in a chemical equation
LeChatelier’s PrincipleWhen a system atequilibrium is placed understress, the system willundergo a change in sucha way as to relieve thatstress.
Henry Le Chatelier
When you take something away from a system at equilibrium, the system shifts in such a way as to replace what you’ve taken away.
Le Chatelier Translated:
When you add something to a system at When you add something to a system at equilibrium, the system equilibrium, the system shiftsshifts in such a way as toin such a way as to use up what you’ve added.use up what you’ve added.
LeChatelier Example #1A closed container of ice and water at equilibrium. The temperature is raised.
Ice + Energy Ice + Energy Water Water
The equilibrium of the system shifts to the _______ to use up the added energy.
rightright
LeChatelier Example #2A closed container of N2O4 and NO2 at equilibrium. NO2 is added to the container.
NN22OO4 4 (g) + Energy (g) + Energy 2 NO 2 NO22 (g) (g)
The equilibrium of the system shifts to the _______ to use up the added NO2.leftleft
LeChatelier Example #3A closed container of water and its vapor at equilibrium. Vapor is removed from the system.
water + Energy water + Energy vapor vapor
The equilibrium of the system shifts to the _______ to replace the vapor.rightright
LeChatelier Example #4A closed container of N2O4 and NO2 at equilibrium. The pressure is increased.
NN22OO4 4 (g) + Energy (g) + Energy 2 NO 2 NO22 (g) (g)
The equilibrium of the system shifts to the _______ to lower the pressure, because there are fewer moles of gas on that side of the equation.
leftleft
What about this?
3 H2(g) + N2(g) <--> 2 NH3(g)
What happens when…a)More N2 is added right/left/no change
b)Pressure is increased right/left/no changec) Temp. is deceased right/left/no change
Or this?
• The system depicted here is maintained at a temperature of 30 °C. If the temperature of the system is doubled, the system will achieve equilibrium by which of the following responses?
a) The temperature of the liquid water will exceed the temperature of the vapor.
b) The temperature of the vapor will exceed the temperature of the liquid water.
c) A higher percentage of the water vapor in the container will condense to liquid.
d) A higher percentage of the water will move into the vapor phase.