the YZR-M1. - Family Busynessfamilybusyness.com/wp-content/uploads/2018/10/yzr-m1-04_assembly_full.pdfthe YZR-M1. 2 Tools and materials needed Basic working method and markings Items

2006.4.17

Assembly instructions: Fourteen A4-sized sheets.

Paper craft: Eighteen A4-sized sheets with 114 parts in all

These instructions apply only to the "YZR-M1." These Paper Craft parts areeasier to work with when printed out on strong, thick paper (like postcard stock).

In creating these Paper Craft models we use110kg Kent paper stock

Thank you for downloading the "YZR-M1"paper craft model. By simplyfollowing this manual while referring to the names and numbers shownon the parts sheets, you can assemble an authentic-looking replica of the YZR-M1.

2

Tools and materials needed

Basic working method and markings

Items of Caution

One - point Advice

*Before beginning assembly, test adhesive amounts

on extra paper.

*Cut carefully with cutting blade, Exacto-knife or

scissors.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill in these spots.

It is recommended that this be done after each stage

of assembly because coloring becomes more difficult

once parts are assembled.

*As an adhesive, white wood glue is recommended.

Avoid over application as this may cause the paper to

wrinkle.

*For folding parts, first use an awl or other pointed

tool to make a light crease along the dotted or solid

line. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

-Ruler - scissors - blade cutter or "Exacto-knife" - awl or

other pointed tool (for making a folding crease) - felt pen

- pin set - glue - hand towel ( for cleaning your fingers) -

dictionary or other heavy book ( to press the papers flat).

*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size. There

may be differences in dimensions, depending on the

type of printer used.

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,

Exacto-knife or scissors.

Fold along these lines. The printed surface should beon the outside of the folded shape.

Solid lines

Fold along these lines. The printed surface should beon the inside of the folded shape.

Broken lines

Cut along these lines.Dotted line

Do not fold or cut the partsmarked .

Cut out parts marked with anasterisk(*).

Red dots are the referencepositions for gluing surfaces.

2

1To begin

How to assemble

First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.

1 Assembling the Front Cowl

Front Cowl Sheet A, 5 parts in total

Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.

Indication of Working Methods Fold or Curve Glue

A-A-2

A-A-3

A-A-2

A-A-1

A-A-5

A-A-4

3

Reference photo


SteeringSheet B, 18 parts in total



2 Assembling the Steering

[ Upper Steering Column ]

[ Lower Steering Column ] *DO NOT glue the upper and the lower parts

of the steering column at this stage.

B-B-1818B-B-1717

B-B-1414

B-B-5

B-B-1313

B-B-1212

B-B-1

B-B-2 B-B-4

B-B-6

B-B-1010

B-B-8

B-B-7

B-B-3B-B-1111

B-B-9

B-B-1616B-B-1515

4

Reference photo


Fuel TankSheet C, 2 parts in total



3 Assembling the Fuel Tank & Exhaust Pipes

Exhaust PipesSheet D, 6 parts in total


D-D-1

C-C-1

C-C-2

D-D-5D-D-4

D-D-6

D-D-3

D-D-2

5

Reference photo

Reference photo


Rear FenderSheet E, 12 parts in total



4 Assembling the Rear Fender

E-E-1

E-E-7

E-E-6

E-E-1212

E-E-5

E-E-4

E-E-3

E-E-9

E-E-1010

E-E-1111

E-E-2

E-E-8

6

Reference photo


Under CowlSheet F, 10 parts in total



5 Assembling the Under Cowl

Reference photo

F-F-1

F-F-3

F-F-7 F-F-2

F-F-8

F-F-9

F-F-6

F-F-1010

F-F-5

F-F-4

7


FrameSheet G, 21 parts in total



6 Assembling the Frame

G-G-1

G-G-1616

G-G-1818

G-G-1919

G-G-1717

G-G-2

G-G-1515

G-G-1313G-G-8G-G-6

G-G-1010

G-G-2020

G-G-1414

G-G-2121

G-G-4

G-G-7

G-G-3

G-G-1111

G-G-1212

G-G-5

G-G-9

8

Reference photo

7 Assembling the Rear Arm

*Do not glue Parts H-3 to H-4 at this stage.


Rear ArmSheet H, 13 parts in total



H-H-1111

H-H-2

H-H-1313

H-H-1212

H-H-8

H-H-7

H-H-3

H-H-4

H-H-1010

H-H-9

H-H-1

H-H-6H-H-5

9

Reference photo

8 Assembling the Front Tire

I-I-2

I-I-1212

I-I-1414

I-I-5

I-I-1313

I-I-1111

I-I-4

I-I-1010

I-I-8

I-I-1

I-I-9

I-I-3

I-I-6

I-I-7


Front TireSheet I, 14 parts in total



*Glue the completed front wheel to the assembled front tire.

Front wheel

Front Tire

10

Reference photo

9 Assembling the Rear Tire

J-J-1010

J-J-1212

J-J-3

J-J-1111

J-J-9

J-J-2

J-J-8

J-J-7

J-J-1

J-J-4

J-J-5

J-J-6

11

Reference photo


Rear TireSheet J, 12 parts in total



*Glue the completed rear wheel to the assembled rear tire.

Rear Tire

Rear wheel

12

10 Finish

12

4

5

5

9

11

6

12

12

8

10

10 3

7

2345678910

11

12

1

Assembly Instructionsglue the assembled parts in numerical

order through .

Glue the Rear Tire to the Rear Arm.

Glue the Rear Arm to the Frame.

Glue H-3 to H-4.

Glue H-3 to the Frame.

Glue the Rear Fender to the Fuel Tank.

Glue the Fuel Tank to the Frame.

Glue the Under Cowl to the Front Cowl.

Glue the Under Cowl to the Frame.

Glue the upper part of the Steering to the Frame.

Glue the lower part of the Steering to the upper part of the Steering and the Frame.

Glue the Front Tire to the lower part of the Steering.

Finish by gluing the Exhaust to the Rear Arm and the Rear Fender.

H-3

Front Cowl

Lower Steering Column

Front Tire

Rear Fender

Exhaust Pipes

Fuel Tank

Under Cowl

Rear Arm

Rear Tire

Frame

H-4

Upper Steering Column

Please use the dots on each component as reference when gluing surfaces.

121

13

FRONTRIGHT

11 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

B-B-1B-B-2B-B-3B-B-4B-B-5

B-B-6B-B-7B-B-8B-B-9B-B-1010

B-B-1111B-B-1212B-B-1313

B-B-1717B-B-1818

B-B-1414B-B-1515

B-B-1616

E-E-1E-E-2E-E-3E-E-4E-E-5

E-E-6E-E-7E-E-8E-E-9E-E-1010

E-E-1111E-E-1212

D-D-1D-D-2D-D-3D-D-4D-D-5

D-D-6

C-C-1C-C-2

A-A-1A-A-2A-A-3A-A-4A-A-5

Rear Fender Fuel Tank Front Cowl

Exhaust Pipes

I-I-1I-I-2I-I-3I-I-4I-I-5

I-I-6I-I-7I-I-8I-I-9I-I-1010

I-I-1111I-I-1212I-I-1313I-I-1414

Front TireSteering

14

12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

REARLEFTG-G-1G-G-2G-G-3G-G-4G-G-5

G-G-6G-G-7G-G-8G-G-9G-G-1010

G-G-1111G-G-1212G-G-1313G-G-1414G-G-1515

G-G-1616G-G-1717G-G-1818G-G-1919G-G-2020

G-G-2121Frame

J-J-1J-J-2J-J-3J-J-4J-J-5

J-J-6J-J-7J-J-8J-J-9J-J-1010

J-J-1111J-J-1212

Rear Tire

H-H-1H-H-2H-H-3H-H-4H-H-5

H-H-6H-H-7H-H-8H-H-9H-H-1010

H-H-1111H-H-1212H-H-1313

Rear Arm

F-F-1F-F-2F-F-3F-F-4F-F-5

F-F-6F-F-7F-F-8F-F-9F-F-1010

Under Cowl

Documents

the YZR-M1. - Family Busynessfamilybusyness.com/wp-content/uploads/2018/10/yzr-m1-04_assembly_full.pdfthe YZR-M1. 2 Tools and materials needed Basic working method and markings Items