Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PRODUCT INFORMATION
The WheelHorse
PRODUCT INFORMATION
The WheelHorse
- The versatile forest machine
Have You missed a machine for small scale forest work that are developed for accessibility,
capacity and usability?
We are extremely pleased to be able to present a revolutionary concept that involves an articulated
“thinning forwarder” that you can both go on and manage by the joystick you know from
IronHorse.
We have used well-tried technology solutions from Iron Horse and combined this with the need for
a new “thinning forwader” to the small-scale forestry. Just as the Iron Horse The Wheel Horse is a
complete system for forest, farm and transport in different terrain. Flexibility, strength, and low
ground pressure makes it an environmentally friendly alternative to heavier machines. The machine
is easy to operate and easy to get started and work with.
In comparison to the many ATV vehicles with trailers, this product is fully developed for practical
use in the forest and at the same time, it has properties that allow it to quickly run slightly longer
distances, due to its high speed gear.
MACHINE – THE WHEELHORSE
WheelHorse incl. 1,5 tons trailer
and radicontrolled crane with wire
Part No. 968 7450-20
The WheelHorse is equipped with the reliable Honda engine of 13 Hp
The vehicle is unique with its mechanical transmission and high- and
low gear. The hydraulic engagement on the trailer is easy to control
from the steering handle and the machine has 6 wheel traction, when
there are need extra power for pulling.
Dim (mm) w x h x I
Max load capacity
Transmission
Hydraulic
Total weight incl. trailer
Engine
Traction trailer
Max speed
Support legs
Length wire
1300x1990x4650
(*incl rollover bar)
1500 Kg
Variator/gearbox/Chain transmison
Double pump 1,9/3,8 cm3
1000 Kg
Honda air Cold 4-stroke OHV
Hydraulic transmission
15/6 km/h (gear high/low)
Mechanical
25 m
WheelHorse with T1700 4WD
crane with grip 330
Part. No. 968 7450-10
The WheelHorse is equipped with the reliable Honda engine of 13 Hp
The vehicle is unique with its mechanical transmission and high- and
low gear. The hydraulic engagement on the trailer is easy to control
from the steering handle and the machine has 6 wheel traction, when
there are need extra power for pulling. The trailer is equipped with a
powerful grip that have a big lift capacity comparing to it size.
Dim (mm) w x h x I
Max load capacity
Transmission
Hydraulic
Total weight incl. trailer
Engine
Traction trailer
Max speed
Cranes reach/lifting
capacity
Support legs
1300x1990x4650
(*incl rollover bar)
1500 Kg
Variator/gearbox/Chain transmison
Double pump 1,9/3,8 cm3
1000 Kg
Honda air Cold 4-stroke OHV
Hydraulic transmission
15/6 km/h (gear high/low)
3,3 m/150kg 1,2 350 Kg
Hydraulic
Length 25 m
WheelHorse with T1750 4WD
crane with grip 30-50
Part. No. 968 7450-30
The WheelHorse is equipped with the reliable Honda engine of 13 Hp
The vehicle is unique with its mechanical transmission and high- and
low gear. The hydraulic engagement on the trailer is easy to control
from the steering handle and the machine has 6 wheel traction, when
there are need extra power for pulling. The trailer is equipped with a
powerful grip that have a big lift capacity comparing to it size.
Max load capacity 2000 Kg
Traction trailer Hydraulic transmission
Cranes reach/lifting capacity 3,5 m/240 Kg 1,2 600 Kg
Support legs Hydraulik
Crane 30-60 Extensionsbar 90 cm
Cranes reach/lifting capacity 4,4 m/160 Kg
ACCESSORIES WHEELHORSE
Dredger bucket DS55 Part. No. 531 0135-84
Dredger bucket is an accessory for the WheelHorse crane to be
attached where the grip is mounted.
It’s perfect to have when cleaning the ditches or other areas
combined with the dumper trailer. Also good to use when
transporting soil, gravel or stones.
Volume is 60 liter.
Dumper trailer FL250V Part. No. 531 0170-05
FL250V dumper trailer is adapted for tough handling, 3 mm
thick plate in the lower part and reinforced side flaps.
It’s equipped with double rear folded flaps. You can transport
soil, gravel, stones and equipment even people easily. The total
trailer is galvanized for optimal long life span.
Length:
Total height flaps:
Width:
225 cm
50 cm
122 cm
Bracket for Gasoline can 10L
Part. No. 531 0170-14 Practical bracket for gasoline can.
Hydraulic winch, radio controlled Part no. 531 0170-00
RC Hydraulic winch HV500 is a reliable and proven construction. The
winch kit is complete with also radio controlled box, wire, hock, hoses,
and electrical controlled hydraulic valve.
Weight
Speed
Oil pressure
Maximum pull strength
Rec. Oil flow
Radio controlled
Wire/thickness
Range RC
Wire length
11 Kg
30 m/min
190 bar
500 Kg
10-15 l/min
2 channels
5 mm
Ca 50 m
25 m
Snow chains Part No. 531 0170-12
With the snow chains attached on the front wheels, You get the
protection for preventing to slip.
Meassure 10.0/75-15,3
Snow blade Part No. 531 0170-20
Snow blade incl. the attachment rig is adapted to the
WheelHorse and is easily mounted onto the machine. The
attachment rig will be permanente attached to the machine, and
when You need the blade You easily attaché the blade to the rig
easily with 2 pins. It’s the same easy procedure when You are
disconnecting the blade from the machine.
Width
Height
182 cm
52 cm
Working lights LED 10-80V Part No. 531 0151-38
LED lights are low power and have high tolerate of vibration
and gives an terrific light. Every LED has it’s own reflektion
sektor.
Winch for snowblade
Part No. 531 0170-21
WARN RT25 winch has a well-tested technic, high quality
and modern engine which gives it a long life span with low
power consumption.
Top speed is 15 km/h, on high gear!
Lennartsfors AB Dealer
Lennartsfors 1
S-672 92 ÅRJÄNG
Tel. +46 (0)573-39200
Sweden
Website www.lennartsfors.com