Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
The Turbo-S modelThe Turbo-S modelThe T
• Frequency-controlled feed motorsguarantee an exact positioning of thetimber pieces in the hydraulic fingerjoint press in connection with anautomatic length measurement.*
• The integrated saw cuts the timber barinto the rinto the requested outfeed lengths andequested outfeed lengths anda pneumatic or servo-controlled crossfeeding bar conveys the timberinto the press channel. Charging isnow possible simultaneously withpressing. A capacity of 12 presscycles/min. can be achieved. Cut-to-length saws can be installed at theoutfeed area of the press.
• Optionally top and bottom scoringunits are available that make the
cutting of edge fingers withoutany tear-outs possible in connectionwith the Weinig cutter spindle.
• Precise finger joints of higheststability ensured by state-of-the-arttooling.
*Other press models such as fingerjoint assembly presses and continuouspresses can also be used forproducing an endless timber ribbon.
An excellent tool configurationincluding scoring saws from the top andbottom, hoggers and cutters (adjustablewithin a 1/100 mm range) is the basis oftheproductionofprecisefingerjointprofiles.Thescoringsawsaresynchroni-zed to prevent tear out. The indirect driveof the maintenance-free WEINIG built toolspindles ensures high capacity reservesand vibration-free processing of shorttimber pieces. This ensures precise jointquality, splinter-free from thefingerbasetofingerpointandanabsolutelytightfingerjoint.
FlankenJet glue application systemThe glue application system developed byWEINIG GRECON provides for an exactlyproportionedandspecificglueapplicationallthewaydowntothefingerbase,evenwithcriticalprofiles.Thegluefilmisdistributed on the entire surface of thejoints; nevertheless glue savings arerealized. Almost all commercially availableglues can be used, e. g. two-componentglues.
Tools for any type of application:Optimized tooling for exact finger jointing
Facts
Infeed length
Timber width
Timber thickness
Outfeed length
Thrust force
Timbercrosssectionatafingerlengthof10/11mm(softwood)
Timbercrosssectionatafingerlengthof10/11mm(hardwood)
Capacity m/min. (Turbo-S 1000, vertical jointing, 30 x 90 x 400 mm)
Capacity m/min. (Turbo-S 1000, horizontal jointing, 20 x 50 x 350 mm)
Feeding system
Shaper types
Transfer
Press
Production statistics
Diagnosis system
Multiple lengths
Timber tear-out prevention (scoring unit at the bottom)
Timber width min. 30 mm
Timber width max. 225 mm
Timber thickness min. 16 mm
Timber thickness max. 100 mm
Shufflinglimitstop
Timber monitoring
Splinter protection
Glue application system FlankenJet
Communication (teleservice)
Drive of cutter spindle
Capacity reserve, cutter spindle drives (50 kW)
Servo-controlled feed
Drive of hogger (+ scoring unit)
** Other infeed lengths upon request
Turbo-S 1000/1500/2000/2500/3000
150-1000, 150-1500, 150-2000, 150-2500, 150-3000 mm
40-205 mm
20-80 mm
3000-6100 mm **
120 kN/12 t (145 kN / 14,5 t)
100 cm (120 cm2)
80 cm (96 cm2)
57 m/min.
30 m/min.
compartment-type feeder (automatic packaging unit)
package-type twin shaper
automatic
two-channelpress,fingerjointassembly,continuouspress
37 kW
11.5 (15) kW
Standard Option
Product Unit Jointing Technology
WEINIG GRECON GMBH & CO. KG
Hannoversche Str. 58D-31061 Alfeld / HannoverGermany
Phone +49 (0) 51 81 / 939-0Fax +49 (0) 51 81 / 939-225E-Mail [email protected] www.weinig.com