The Tracking Magnet Surface · 2018-10-12 · ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017 Luminaries Profiles Corners Spot Tracking Magnet

Fixture Type

Job Name

The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture

Description

The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent LED light elements achieve flexible yet precise illumination with artistic results. The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. The Tracking Magnet is available in recessed, surface, or pendant mounted applications, making it an option in even the most varied of job conditions. Vertical and horizontal corners complete the system. The Tracking Magnet is perfect for retail displays where frequent changes are typical and absolute performance is required.

Lamps

Spot Tracking Magnet 50: LED4.2W, 410lm, 2700K, CRI 904.2W, 440lm, 3000K, CRI 90

Spot Tracking Magnet 90: LED9.6W, 850lm, 2700K, CRI909.6W, 900lm, 3000K, CRI90

Spot Tracking Magnet 120: LED12.5W, 1060lm, 3000k, CRI 9012.5 W, 985lm, 2700K, CRI 90

Anthony Spot Track: LED17W, 1870lm, 3000K, CRI 9017W, 1785lm, 2700K, CRI 90

WALLEE Spot9W, 800lm, 2700K, CRI 909W, 820lm, 3000K, CRI 90

Light Strip: LED2.7W, 230lm, 3000K, CRI 805.4W, 460lm, 3000K, CRI 808.1W, 685lm, 3000K, CRI 8010.8W, 915lm, 3000K, CRI 8013.5W, 1145lm, 3000K, CRI 802.7W, 230lm, 2700K, CRI 805.4W, 460lm, 2700K, CRI 808.1W, 685lm, 2700K, CRI 8010.8W, 915lm, 2700K, CRI 8013.5W, 1145lm, 2700K, CRI 80

Construction

Luminaire and profiles are made ofextruded aluminum.

Profiles can field cut.

F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2

Page 1 of 7

For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017

Photometrics

For current IES files please visitarchitectural.flosusa.com

Electrical

24V electrical system. Powered by remote listed Class 2 power supply.

System is limited to a maximum powercurrent of 4A.

After every 96W make a new connectionwith a connection feed profile.

Wattage per linear foot is dependent uponquantity and type of light modules used,total max possible per linear foot is 34W.

EC to supply site cabling from driver to track location.

Specify one connection cable per driver.

Spot modules on board dimming. Not available on Light Strips. Wall switch dimmingnot available.

Notes

The 120 spot tracking lightmodule is offered with a spot and aflood lens.

All available accessories for the spotmodules come with the product.

Fixture heads all rotate 360° and tilt90° from nadir.

Listings: UL Listed, IP 20 dry ratedonly, Class 2.

Surface Profile

Electromechanical track for surface-mounting.

Linear tracks available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. Both versions available in lengths from 1m to 2m.

Covers included with the power feed profiles. Attachment accessories included with all products.

90° corners available in the same plane (symmetrical element for left and right corner) and 90° symmetrical internal corners in a different plane. For connection to the driver.

Warranty

2 years from date of sale.

Fixture Type

Job Name



Page 2 of 7


Luminaries

Profiles

Corners

Spot Tracking Magnet 50 Anthony Spot TrackSpot Tracking Magnet 90 Spot Tracking Magnet 120 Wallee Light Strip

Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets.

Built-in dimming knob dims fixture from 20-100%. Dimming not available on Light Strips.

All available accessories ship with the product.

The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.

Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transitionfrom wall to wall surfaces.Corner can be used for feeding by removing cover plate. No wire provided for feeding.

Length Part Number FeedUnit Profile

06.150159’’ (1.5m)

06.150278.74’’ (2m)

06.150039.4’’ (1m)

06.1506 05= Chrome

06.1507 14 = Black

06.1505 40 = White

Part NumberIntermediate Profile

Finish

Both profile types can be cut to different lengths in field.

1.7‘‘[4

4 mm

]

0.6‘‘[15,2 mm]

0.7‘‘[18 mm]

Horizontal Corner

06.1510

40 = White 05 = Chrome 14 = Black

Finish

5.9‘‘

[150mm]

5.9‘‘

[150mm]

06.1512

Inside Corner

Finish

5.9‘‘

[150mm]

5.9‘‘

[150mm]

40 = White 05 = Chrome 14 = Black

Fixture Type

Job Name



Page 3 of 7


Ceiling Kits

Drivers

End Caps

Fixed Ceiling Kits (2 units)

LED Driver- 96W Optronic 24V Driver, no dimming wire configuration

08.8866.14

08.8867.14Adjustable Ceiling Kits (2 units)

For installation on ACT or wood ceiling. Consult factory for other ceiling types.

End caps come with feed profiles. These should only be ordered separately if the installation is exclusively composed of intermediate elements.

FIXED CEILING KIT

[2 PER 500mm]

ADJUSTABLE CEILING KIT

[2 PER] M6 THREADED ROD

(BY OTHERS)

0.6‘‘

08.8890.14A 14 = Black

08.8890.40A 40 = White

Part Number Finish

LED96W24V-Non-Dim

Splice Box

SP-24V-96W-Non-Dim 13‘‘

[347mm]

2.2‘‘[59mm]

1.7‘‘[46mm]

Fixture Type

Job Name



Page 4 of 7


Spot Tracking Magnet 50


CCT

CCT

CRI

CRI

90

90

3000

3000

2700

2700

90

90

4,2

9,6

03.6441

03.6411

21º

25º

410

850

4,2

9,6

03.6440

03.6410

21º

25º

440

900

14 = Black

14 = Black

.90 Dimmable on board

A90 Dimmable on board

14 = Black

14 = Black



05 = Chrome

05 = Chrome

05 = Chrome

05 = Chrome

40 = White

40 = White

40 = White

40 = White

Initial Lumen

Initial Lumen

Watts

Watts

Part Number

Part Number

Beam Spread

Beam Spread

Finish

Finish

Dimmable on board

Dimmable on board

3.1‘‘

[78

mm

]

360º

90º2.0‘‘

[50

mm

]

5.0‘‘

ø 2.3‘‘

[128 mm]2.3‘‘

[58 mm]

[58 mm]

4.7‘‘[119 mm]

2.6‘‘[66 mm]

4.8

‘‘[1

21 m

m]

360º

90º

3.5‘‘[9

0 m

m]

ø 1.4‘‘

[35 mm]

Fixture Type

Job Name



Page 5 of 7



CCT

CCT

CRI

CRI

90

90

3000

3000

2700

2700

90

90

12,5

17

985

1785

12,5

17

25º

29º

03.6412

03.6425

03.6413

03.6424

25º

29º

1060

1870

14 = Black

14 = Black



14 = Black

14 = Black



05 = Chrome

05 = Chrome

05 = Chrome

05 = Chrome

40 = White

40 = White

03.6402

03.6404

03.6400

30º

40º

20º

30º

40º

20º

03.6403

03.6405

03.6401

40 = White

40 = White

Initial Lumen

Initial Lumen

Watts

Watts

Part Number

Part Number

Beam Spread

Beam Spread

Finish

Finish

Dimmable on board

Dimmable on board

Anthony Spot Track

2.6‘‘

ø 1.8‘‘

[66 mm]4.7‘‘

[119 mm]

[46 mm]

4.7

‘‘[1

19 m

m]

360º

90º

6.0

‘‘

[153 m

m]

ø 4

.3‘‘

2.2‘

‘[5

5 m

m][1

10 m

m]

360º

90º

4.6‘‘

[117mm

]

ø 3.0‘‘[76 mm]

7.3‘‘[185 mm]

Fixture Type

Job Name



Page 6 of 7


Wallee

CCT

Length

CRI

CCT CRI

90

80

80

80

80

80

3000

11.8’’ (300 mm)

23.6’’ (600 mm)

35.4’’ (900 mm)

47.2 ‘‘ (1200 mm)

59’’ (1500 mm)

2700 90 9800

9

2.7

5.4

8.1

10.8

13.5

- 03.6490

03.6491-

820

230

460

685

915

1145


.90 non dimmable

.90 non dimmable

.90 non dimmable

.90 non dimmable

.90 non dimmable


03.6360.14

03.6370.14

3000

2700

3000

2700

3000

2700

3000

2700

3000

2700

03.6361.14

03.6371.14

03.6362.14

03.6372.14

03.6363.14

03.6373.14

03.6364.14

03.6374.14

Initial Lumen

Initial Lumen

Watts

Watts

Part Number

Part Number

Beam Spread Finish Dimmable on board

Dimmable

14 = Black

40 = White

14 = Black

40 = White

Light Strip

1.6‘‘

[24

2 m

m]

1.6‘‘

[12

mm

]

1.6‘‘[220

mm

]

1.6‘‘[8

0 m

m]

SEE TABLE

1.6‘‘[12 mm]

6‘‘[15 m

m]

1‘‘[25 m

m]

Fixture Type

Job Name



Page 7 of 7


How to Specify

A. Select and position corners

1. Horizontal - Connect sections on flat surfaces (90º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270° corner)

B. Fill lengths between corners with Linear Housings

3’, 6’ or 9’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.

C. Drivers

Quantity of drivers determined by total wattage or light elements in section (total maximum possible per linear foot is 34W). Maximum driver distance is 15’. Locate drivers nearby.

D. Select Spot heads

Linear strips are available in five nominal lenghts: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch.

Visit FLOS Worldwide YouTube channel for installation videos

Documents

The Tracking Magnet Surface · 2018-10-12 · ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017 Luminaries Profiles Corners Spot Tracking Magnet