The Three-Stick Roycroft Packframe

Embed Size (px)

Citation preview

  • 7/29/2019 The Three-Stick Roycroft Packframe

    1/6

    The Three-Stick Roycroft Pack Frame

    by Dick Baugh

    How would you like a pack frame that is comfortable, strong, and can be made from natural materials in less than 1/2 hour? We were introduced t

    the Roycroft pack by Mors Kochansky at the Rabbitstick Rendezvous a few years ago.

    Its an excellent lesson in self sufficiency, outdoor survival skills, knifecraft, lashing, multiple use of an object (blanket) and use of natural materia

    What more do you want? But is it primitive? I don't know if our stone age ancestors actually made this type of pack frame. We do know, howeve

    that the "Iceman", whose remains were found after 5,300 years in the Alps between Italy and Austria, had with him a wood pack frame (1, 2, 3. S

    drawing also). The archaeologists have released very few details on his pack frame but say that it was an inverted U shape. I also saw a photo takin the Himalayas early in the 1900's of a simple inverted U-shaped pack frame. The Koreans have been using A-frame packs for centuries.

    Essentially we are lashing together a triangular wood frame, wrapping our belongings in a blanket and tying the bundle to the frame. A single piec

    of thick cordage is then used as combination shoulder straps and waist band

    The Frame

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html

  • 7/29/2019 The Three-Stick Roycroft Packframe

    2/6

    Cut three sticks for the frame. They should be about as thick as your thumb. The

    length of the bottom piece should be the width of your buttocks. Ideally it should al

    be slightly curved to fit your back. The length of the two side pieces should be equa

    to or slightly longer than the distance from your buttocks to the back of your head.

    have heard of other ways to select the lengths but this works for me. In the past I

    have used green willow (Salix sp.) because it was available in the correct diameter,

    straight, plentiful and easy to cut and if necessary, bend. The Iceman's pack frame w

    made from hazelnut and larch. Hazelnut is a much tougher wood than willow. The

    three sticks are held together by a combination of joints and lashing. Figure 1 show

    detailed dimensions of the pack that works best for me. As a reference point I am 5tall and weigh 140 pounds. If the pack frame is too short, then a greater fraction of

    the weight will be carried by your shoulders. If it is too long, then the shoulder stra

    will be very loose and the load will wobble from side to side.

    Figure 2 shows two different kinds of joint that can be used to hold the sticks

    together, the lap (Abe Lincoln) joint or the butterfly joint, another Mors Kochansky

    original (4). I don't see much difference between the two but the lap joint is possibl

    more appropriate if you have weak wood and strong cordage, whereas the butterfly

    joint works well if you have stronger wood and/or weaker cordage. My frame uses

    lap joint on top and butterfly joints on the two bottom joints.

    The lashing material can be any kind of vegetable fiber cordage or rawhide. It doesn

    even have to be very strong if the joints are tight. One joint on my pack is put togetwith finely shredded cattail leaf fiber, another with New Zealand flax and the third

    with willow bark cordage. Figure 3 shows one possible way of lashing. It isn't ver

    critical since most of the strength should come from the joint.

    The original strap for my pack frame was made from a worn out Volvo seat belt pl

    a piece of nylon rope. Strong, durable and comfortable but it wasn't very primitive.

    The strap I am now using is two-ply shredded cattail (Typha sp.) leaf rope. It is ma

    with the middle part, used for the shoulder straps, thicker than the ends. For comfort, the straps should be at least one inch (2.54 cm) in diameter.

    The straps should taper down to 1/2 inch after they leave the shoulders to facilitate tying them around your waist.

    Making straps out of cattail leaves is a good lesson in cordage techniques. Making a piece of cordage can be an abstract exercise which doesn't me

    much if you have no specific application for the cordage however making a piece of cordage for a particular application combines the "How to ma

    it" with the "What do I use it for after I've made it?". For optimum results gather the cattail leaves late in the growing season, before they have die

    and turned brown (5). Shred them into narrow strips. A coarse "comb" made by driving nails into a board is a useful tool for the shredding.Otherwise it can be done by hand. Finely shredded fibers will be stronger and more flexible. After shredding, the fibers should be dried and then

    moistened before twining.

    take your choice. The important things are that the cattail leaves should be shredded finely to

    give flexibility and the straps should be thick enough to give comfort.

    Three-ply braided versus two-ply twined straps:

    Packing and tying on the load:

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html

  • 7/29/2019 The Three-Stick Roycroft Packframe

    3/6

    You want to pack your load in such a way that it is comfortable and everything is readily accessible without having to take it all apart. The best w

    have found so far is to wrap up your gear the same way you would a baby. Another analogy is to say the blanket is folded like an envelope. Fold

    your blanket into a square and place it on top of the pack frame with the corners up, down, left and right. Place something soft, such as a coat or

    sweater, at the bottom for padding where it will contact your lower back. This is very important. Otherwise the crosspiece digs into your lower

    back. Put the rest of your gear on the blanket. Fold up the bottom corner, and then wrap the left and right corners around the gear. Last, fold the to

    corner down. This way it is easy to access anything by lifting up the top corner.

    Begin securing the load to the pack frame by first tying a rope to the center of the crosspiece. The load is then tied

    in accordance with Figure 4. It is critical to tighten the rope sufficiently that some of the soft padded portion of the pack protrudes through to keep

    the crosspiece from contacting your lower back. That is shown in Figure 5.

    Tying the pack to the frame:

    Securing the straps:

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html

  • 7/29/2019 The Three-Stick Roycroft Packframe

    4/6

    Secure the center of the straps to the top of the pack as shown in Figure 6. It can be done as illustrated or with a "lark's head" knot. The straps the

    go over your shoulders, around the bottom of the side pieces and then are tied around your waist. Once the straps are tied together you can leave tknot in place and remove the pack simply by slipping the straps off the bottom of the side pieces.

    Pack secured to the pack frame.

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html

  • 7/29/2019 The Three-Stick Roycroft Packframe

    5/6

    My first real experience with a Roycroft pack was on a two week BOSS walkabout in south eastern Utah. I was using the Roycrof

    whereas my compadres were using very simple blanket packs. None of us had very heavy loads. One big advantage of the Roycroft over the simp

    pack was the ease with which you could untie the pack, add something or take something out, and then re-tie it and be on your way. The other

    advantage was greater comfort.

    Field testing:

    My next test of the Roycroft pack was to see how it did with a heavier load. I packed a heavy coat and 25 pounds (11.36 kilograms) of books in t

    Roycroft and took off on a 1 1/2 hour hike in the hills. This is where I learned that narrow straps don't work well. It is also important that there be

    enough padding in the bottom of the pack to keep the cross piece off your tail. Other than that it works great.

    Footnotes

    (l.) 1993, "The Iceman", National Geographic, June, page 36.

    (2.) 1993, "Who Was the Iceman?", Popular Science, February, page 46.

    (3.) 1992, "The Long-Lost Hunter", Audubon, September-October, page 92.

    (4.) Mors Kochansky, "Northern Bushcraft", Lone Pine Publishing, ISBN # 0-919433-51-0.

    (5) 1994, "SPT Fall Bulletin", pages 10- 17

    Iceman's Backpack

    Drawn to scale from photos in "The Man In The Ice" by Konrad Spindler, 1994

    Cross boards - Larch (Larix decidua). Only faces show traces of being worked.

    Boards were split from small branches.

    Top board - 38.3 cent. long x 6.1 cent. wide x 1.2 cent. thick. Bottom board - 40.5

    cent. long x 4.6 cent. wide x O.6 cent. thick. All boards had rounded end notches li

    bottom right.

    Rod - Hazel (Corylus avellana) 1.98 meters long.

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html

  • 7/29/2019 The Three-Stick Roycroft Packframe

    6/6

    This article was first published in (Spring 1995, #9)

    E-mail your comments to "Richard A. Baugh" at

    The Bulletin of Primitive Technology

    [email protected]

    The PrimitiveWays Book

    The PrimitiveWays CD

    PrimitiveWays Home Page

    1998 - 2003PrimitiveWays

    4/29/05 9:2he Three-Stick Roycroft Packframe

    Pagettp://primitiveways.com/pack_frame.html