Solving challenges.™

Your solution to slow ROP is the industry’s most advanced steel body drill bit.

The SteelForce™ Bit

Drill Bits& Services

The SteelForce™ Bit

Higher penetration rates. Lower cost per foot. Application-specific designs. With the Halliburton SteelForce™ bit, slow ROP due to bit cleaning is history.

Taking drill bit design to a higher level, the Halliburton SteelForce™ bit features a large flow area, an anti-balling coating to help with cuttings removal and bit balling, and the addition of micro nozzles to get the right flow to the right place on the bit face. Designed for your specific application by a Halliburton Application Design Evaluation (ADESM) service specialist utilizing our industry-unique Design at the Customer Interface (DatCISM) service, the result is a steel bit with higher blade standoff to increase face volume for improved cuttings evacuation and higher ROP.

SelectCutter™ PDC Technology

2004 2006 2008 2010 2011 H

Advanced Hardfacing Material (K1)

• 100% (2X) more abrasion resistant• 30% more erosion resistant • Tough carbide pellets • K1 hardfacing is virtually fracture proof

K1 Hardfacing

Current Hardfacing

Enhanced Hydraulics

Matrix Bit SteelForce™ Bit

Thermal Mechanical Integrity™ (TMI)The ability of a cutter to manage the frictional heat generated during the drilling process.

Why is TMI important? Improving TMI means the cutter can manage higher temperatures before the diamond-to-diamond bonds are damaged and cutter wear begins.

What is the value to you? Cutters stay sharper longer and, once they begin to wear, they wear slower. This means that the bit will drill farther faster, and reduce the cost per foot drilled.

SteelForce bits can have 55% higher blade standoff compared to matrix bits without sacrificing blade durability. The result is better hydraulics, enhanced cleaning and faster ROP.

The high blade standoff and bullet-shaped junk slot design of the SteelForce bit as compared to a matrix bit results in open face volume for faster ROP and stronger blade design to combat drillstring vibration.

The SteelForce™ Bit

Solving challenges.™

Real-world results from the industry’s most advanced steel body bit.

What’s your shale drill bit challenge? For more information about the Halliburton SteelForce bit, please visit us at www.halliburton.com/drillbits.

Haynesville Shale Play, USA: 33% Reduction in Curves • HDBS6¾-in.SF63H• 30%higherROPincurvecomparedtobestoffset

• Onlybittodrillentiresectioninonerun• 33%reductionincurvedrillingcost

Kingston Field, USA: 27% Faster ROP, Shoe-to-Shoe • HDBS6¾-in.SF73H• DrilledentirecurveandlateralsectionsinsingleBHArun

• Drilled6,657feetatanROPof33ft/hr,resultingin14%lowerCPFthantheoffsetaverages

• Dullconditionof1-0-CT-N-X-I-NO-TD

Bit Type Depth in Depth out Footage Hours ROP

12¼-in.SF56 1,530-ft. 6,890-ft. 5,360 23 233ft/hr

OMAN: 87% Faster ROP Over Field Average • HDBS12¼-in.SF56• Drilledentiresectionwith87%fasterROPoverthefieldaverage;dullcondition1-1WT

Set World Record for Operator in 12 ¼-in. Hole • HDBS12¼-in.SF56• AnaimaField• DrilledtoKOPandsettheoperator’sworldrecordfor12¼-in.bydrilling(aboutamile)inlessthan24hours

• Drilled5,360feetin23hoursatanROPof233ft/hr• Rankedall-timetop50“24-hourprogress”list• DrilledLowerFiqaandNatihAwithexcellentdullconditionof1-1-WT-N-X-I-NO-TD

www.halliburton.com

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H0873805/12 © 2012 Halliburton. All Rights Reserved.

FAMILY | CLASS CUTTER SIZE OPTIONAL FEATURES

BACKUP CUTTER (OPTIONAL)

APPLICATION PLATFORM (OPTIONAL)

BLADE COUNT

APPLICATION PLATFORM

(OPTIONAL)

CUTTER SIZE

FAMILY | CLASS BLADE COUNT BACKUP CUTTER (OPTIONAL)

SteelForce™ Drill Bits

SelectCutter™

SelectCutter™

5S F G 5 HMNot listed in nomenclature but found on marketing spec sheet. For more information, please contact your local Halliburton Drill Bits representative.

b = Backreamingc = Carbide Reinforcemente = SE - Highly Spiraledf = Full PDC Gauge Trimmersk = Kerfing - Scribe Cuttersp = PDC Gauge Reinforcementu = Updrill

H = Hard and abrasive

D = Dual Row Backup

M = Modified Diamond Round

R = R1™ Backup Cutters

C = Carbide Impact Arrestor

D = Directional (all other directional

systems) G = Geo-Pilot® Rotary Steerable

E = Geo-Pilot® EDL Rotary Steerable

T = Turbine High Rotational Speed

The blade count describes the number of blades on the bit.

3 = Three Blades

4 = Four Blades

5 = Five Blades

6 = Six Blades

7 = Seven Blades

8 = Eight Blades

9 = Nine Blades

The cutter size digit describes the size of the PDC cutters on the bit. On bits with multiple cutter sizes, the predominant size is described.2 = 8 mm | 3/8"3 = 10.5 mm | 13/32"4 = 13 mm | 1/2"5 = 16 mm | 5/8"6 = 19 mm | 3/4"8 = 25 mm | 1"

FIXED CUTTER DRIll BITs

steelForce™ Nomenclature

SteelForce™ Drill Bits Nomenclature

Advantages of the SteelForce™ Bit• HigherRateofPenetration• LowerCostperFootDrilled• ApplicationSpecificDesign