Embed Size (px)
Citation preview
The Solution to Prevent
Premature Balding! Yes… we’re going to
discuss the solution for premature balding!
Presentation by Bill MartinTiretyte – Monster Seal Tire Sealant
Direct Tel: 408.823.1000, 888.556.8881 [email protected]
www.MonsterSeal.com www.Tiretyte.com
This type of Balding… andpremature tire failure and flat tires!
Causes of Tire Failures
TIRE SEALANT TWO TYPES OF TIRE
SEALANTS:
Sealants that workand… Sealants that Don’t.
How many of you have tried or use a tire sealant?
Why Should I Consider using a Tire Sealant?
&What’s a Good
Tire SealantLook Like?
Why Use a Tire Sealant?
• Increase Tire Life - Maintains Tire Pressure• Increase Fuel Economy – Maintains Tire Pressure• Reduce Flat Tires – Fewer Repairs & Service Calls• Reduce Costly Downtime – Direct & Indirect Costs• Keep Fleet on Schedule – Prevents over-time• Reduce Man Hours – Re-direct Labor Assets• Reduce overall costs – Re-direct Finances • Increase profits - $$$ and help your budget• Fewer headaches, better work environment
A Good Tire Sealant…
• Seals up to ½” diameter tread area punctures in heavy ply tires• Seals most minor rim and bead leaks as they occur • Works in Tube and Tubeless tires – more effective in tubeless• Helps maintain tire air pressure – evenly coats all inner tire surfaces• Pre-mixed and ready to use – never separates in container or tire• Works in high & low speed, on & off road, high & low pressure tires• Does not void tire MFG workmanship warranty’s• Effective at all temps – -45F to over 212F• Will not cause tire imbalance when properly used and installed• Stays pH neutral for the life of the tire – prevents dry rot and bacteria• Helps prevent rust and corrosion in tires and wheels• Compatible with all types of rims and wheels• Water Soluble for easy rinsing prior to repair or retread process
A Good Tire Sealant…
• Has an Indefinite shelf - storage life• Remains homogeneous – no mixing or stirring needed• Non – explosive & Non – flammable• Meets EPA standards for disposal by municipal sewage systems• Non - hazardous material for shipping and storage• Include effective sealing solids – fibers and particulate, etc. • And most important of all…
WORKS CONTINUOUSLY FOR THE LIFE OF THE TIRE
How to install tire sealant?
• Installation Process is Simple
– Five (5) gallon pail hand injection pump kit: Remove tire valve core and deflate the tire to 45 p.s.i., then inject the sealant. Time – about 3 minutes per truck tire.
– Pneumatic injection system: Remove valve core, pumps against any tire pressure, uses your air source.Time – about 1 minute per truck tire.
Which tires should be treated?
• Treat any tire you don’t want to go flat, regardless of the age of the tire.
• Initiate a sealant program and treat specific vehicles, initially, the high flat rate units are treated first.
• Install the sealant into the new tires as they are mounted. Installation fast and simple when the new tires are being mounted.
• Mark and track treated the tires and vehicles.
TIRE SEALANT COSTSThings to consider
1. Cost per container2. Cost per tire 3. Cost per year / month
PRICE vs. COST• Lower Priced– marginal-at-best sealants
will end up costing you more over the life of the product, by sealing just one less flat tire over the life of the tires.
• The price of a premium tire sealant may be higher, but it will cost less over the life of the tires. The Overall cost will actually be lower!
A Good Tire Sealant…
A Good Tire Sealant Keeps Your Tires Up And Costs Down!
Presentation by Bill MartinTiretyte – Monster Seal Tire Sealant
66 East Santa Clara St. San Jose, CA 95113 Direct Tel: [email protected]
