The Self Propelled Bundle ExtractorPeinemann introduces Bauch: the first Self Propelled Bundle Extractor

in the world, a machine which is able to do the entire job.

The Self Propelled Bundle Extractor was designed in Germany by Bauch, in order to meet the high demands of the refineries and the petrochemical sector today. This machine has been built in such a way that it can be operated by just one man by remote control. One of the advantages of the machine is that it has a great manoeuvrability and is easy to use in small spaces using the remote control. Another advantage is that the machine can turn the lifting frame and drive at the same time. Because the machine has been designed to extract bundles with a maximum weight of 24,000 kg, it is a very versatile tool, which can handle almost any horizontal bundle. The maximum height of the bundles to be extracted is 6.40 m and the minimum height is 0.82 m.

The fact that you don’t need a crane to extract the bundles results in lower costs, a faster extraction time and less organisation. The Self Propelled Bundle Extractor can easily load and unload bundles on special frames on trailers, or the machine can be driven to the cleaning slab.

The Self Propelled Bundle Extractor

Following please find the most important technical data

Distributed by: Peinemann Equipment B.V. Nieuwe Langeweg 40, 3194 DB Hoogvliet The NetherlandsTel.: 0031 (0)10 2955000 Fax: 0031 (0)10 2955049 E-mail: pein@peinemann.nl Internet address: www.peinemann.nl

Peinemann Equipment is a subsidiary of the Peinemann Group of Companies.

Operational monitoring instrumentsWater temperature, oil pressure, load control, air pressure, hand-brake indicator lamp, oil pressure gauge

for all hydraulic systems, vacuum warning horn for the suction side of the hydraulic pumps

Automatic motor cut-off when hydraulic oil drops below the minimum levelTwo seperate air brake systems for the trailer and the self-propelled unit -

combined air and spring hand-brake

Electronic control system24 volt relay control with variable electronic oil quantity adjustment of all the hydraulic functions

Selector switch for hydraulic pump 1 or 2All functions can be operated from the cabin as well as by remote control

Safety devicesEmergency power-off switch on both control platforms

All load-bearing hydraulic cylinders are individually safeguarded against excessive pressureAll load-bearing hydraulic cylinders have a line break safety mechanism

Carrying force25 tons at normal jib length up to 40 tons at a respectively reduces jib length

Front and back axles are each constructed for a carrying load of 35 tons

Regulations applied in the construction and calculationDIN 4100 15019 DIN 4114 as well as accident prevention regulations

Crane VBG 9 and VBG 9a as well as lifting platform VBG 14

Length: 7.00 m • Width: 2.85 m • Height minimum: 3.75 m • Dead weight: 24.00 tons

Maximum working height(above ground to bottom of the sheet) 6.40 m

Minimum working height(above ground to bottom of the front tube sheet) 0.70 m

Maximum bundle diameter2.00 m

Maximum bundle weightup to 40 tons

Maximum bundle length8.00 m

Maximum tensile force60.00 tons

Pulling rate15 m/minute

Speedappr. 6 miles/hour