How copper wires are made from row copper and how we change copper in many shapes according to its use for industries. Ganpati engineering made all types of copper wires for industries.
Cabling and Jacketing: The Science behind Manufacturing of
Industrial Copper Wires
The Science behind Manufacturing of Industrial Copper
WiresGanpati Engineering| Jaipur, India |
www.ganpatiengineering.com 1The copper wires undergo a series of
manufacturing and engineering processes before they are ready for
use. The stranded and braided copper wires are special set of
copper wires that are used for specific industrial
applications.
The primary cabling and jacketing process makes the braided
copper wires far stronger than the bare copper wires. The braided
copper wires are grouped during cabling and stranding
operation.
How to eliminate the moisture from braided copper wires during
manufacturing?The braided copper wires produced by cabling process
are susceptible to moisture. It can cause internal faults and also
cause noise interference. In order to remove moisture from the
cables and ensure dry operation, the braided copper wires are
pressurized. Use of air-core cables at the cabling station keeps
the moisture from entering into the gap between wires and the
covering.
Another method to prevent moisture from entering the cables is
the use of gel compounds. The cable is filled with the gel using
core wraps. The gel compound can be introduced at two stages of
cabling process. They are:
During the twisting process at cabling stationDuring the
jacketing process
Yes, they do. The jacketed braided copper wires are filled with
gels and the core is then passed through a stream of hot water.
Aluminium sheath around the braided copper wires ensures that the
cable is capable of withstanding the high voltage surges, during a
lightning strike. It acts as a grounding path for aerial cabling
layouts. A combination of aluminium and steel sheath is also used
for copper cables. Steel sheath with corrugations provide
mechanical strength for buried cables susceptible to floods and
pest attacks. Low density polyethylene is used for braided copper
wires exposed to sunlight and long distance overheads. Do jacketed
braided copper wires require any protective covering?Contact
UsGANPATI ENGINEERING INDUSTRIES
Address: Gokul Path, Vaishali Nagar, Jaipur - 302021 (Rajasthan)
India
Phone : +91-141-2211977 (Office)TeleFax: +91-141-2219147
(Office)Mobile : +91-94140 48492 (Mr. Gupta)
Email : [email protected] Email :
[email protected]
