Upload
truongtu
View
215
Download
1
Embed Size (px)
Citation preview
General Micro Systems | S2U “KING COBRA” | pg. 2 gms4sbc.com
The S2U “King Cobra” is a major breakthrough in server technology. It is the smallest, fastest rack-mount server on the market, with more I/O performance and storage functionality than any other server. It replaces several 1U/2U servers, switches/routers, RAID controllers, and Auxiliary Power Units (APU) with a single 2U, 17-inch deep (short) rack-mountable (or freestanding) enclosure. Furthermore, 100% of the “King Cobra” electronics modules are Line Replaceable Units (LRU) specifically designed for field replacement and upgrading. This at-the-module 100% LRU functionality allows the user to replace any function of the system in the field within seconds, thus providing ultimate flexibility and minimizing down time.
The S2U features state-of-the-art CPU, packaging, and cooling design, utilizing the rugged and proven OpenVPX (VITA 65) architecture. Unlike PC motherboards, which virtually all servers use, the “King Cobra” OpenVPX design can withstand much higher shock, vibration, and temperatures than standard servers. The “King Cobra” utilizes a modular subsystem design allowing the OEM user to upgrade or change the server’s configuration in the field quickly and economically. This reliable, field-proven OpenVPX architecture also takes full advantage of commercial-off-the shelf (COTS) PCI Express (PCIe) boards such as ultra-high-performance video boards, RAID controllers, and DSP modules, which may be quickly and easily plugged/unplugged into the system within seconds. OpenVPX is also used for the redundant, N+1
hot-swappable power supply modules.
S2U “King Cobra” shownwithout outer case.
SYSTEM FEATURES:
GENERAL DESCRIPTION
- Supports Dual Xeon® E5 processors, Router, 20-port managed switch, 48TB RAID storage and Quad NVIDIA® GPU- 100% modular: each subsystem is a Line Replacement Unit (LRU) for ultra-fast servicing, upgradability and sparing- Fully scalable server utilizing standard OpenVPX and PCIe modules- Supports two 6U OpenVPX modules, three 3U OpenVPX modules and four full-length/height PCIe modules- Supports twelve 2.5” removable storage devices such as x4 PCIe (“NVMe”) Enterprise SSD and SAS/SATA drives- Supports removable APU for orderly shutdown and power transients (omit PCIe Card cage)- Dual removable Fan Trays with twelve Smart Fans for quiet, efficient, redundant cooling- Triple redundant, hot-swappable 3U OpenVPX AC/DC Power Supplies for N+1 Power or User I/O- Ultra-low SWaP, only 17” x 17” x 3.25” @ 30 lb. and as low as 300W- Operates at standard temperature 0°C to +50°C or extended temperature -20°C to +75°C- Fully compliant to MIL-STD-810G, MIL-STD-1275D, MIL-S-901D, DO-160D, MIL-STD-461E and IP64- Status LEDs for each Power Supply, Storage module, Fan Tray, and User- Available in ruggedization levels R1-R3
pg. 3 | S2U “KING COBRA” | General Micro Systemsgms4sbc.com
S2U “King Cobra” is the world’s most advanced server system. Besides offering more than 8U worth of server/switch/router/storage functionality in only 2U of (short) rack space, S2U’s field-replaceable, modular architecture is an industry breakthrough at a significantly lower price. Where every server on the planet except S2U relies on an inflexible bolted-in motherboard that is often happiest in an air-conditioned environment, S2U relies on the battle-hardened OpenVPX standard. S2U’s motherboard can be easily swapped out in the field, or upgraded as technology evolves.
In addition to the CPU, every electronics module in the S2U “King Cobra” is a modular line replacement unit (LRU) and can be easily extracted, changed or replaced with a pre-planned product improvement. S2U’s rugged field replaceable modules maximize battlefield uptime and survivability, shattering the fallacy that commercial servers cannot be “ruggedized” for the battlefield. Typical motherboard-based servers can’t survive, they can’t be easily fixed, and they won’t evolve when your program needs change.
PROGRAM COMMONALITY S2U’s modular approach has several other advantages when applied to long-running programs. Besides using modular LRUs for tech refresh on the original program, S2U can be easily adapted to other programs as well. Application software developed for one program can be reused, while new or legacy I/O modules from another program can be added to S2U. In this fashion, S2U remains the same basic system across multiple programs but is modified with different platform-specific configurations. This commonality eases system qualification and meets joint service requirements for “component” commonality across platforms.
SPARES AND FIELD REPLACEMENT S2U’s modular approach also simplifies sparing. A “spare” in S2U is any of the removable LRU electronics subsystem modules. With conventional servers, the lowest size LRU spare is usually the whole server itself. With S2U, spare electronics modules can be available at the depot level. The S2U modular approach saves money, simplifies logistics, and finally makes true field replacement a reality.
LIFECYCLE UPGRADABILITY
Defense systems need to survive the battlefield as well as the design and budget cycles inherent in the military lifecycle. The GMS modular design approach allows the S2U server to upgrade and evolve as technology and programs change, such as from one processor generation to the next. S2U’s electronics modules and firmware are easily upgradeable: a program requalification might not even be required.
THE GMS MODULAR APPROACH
SPARING AND TECH REFRESH
S2U MODULAR TECHNOLOGY COMMENTS ADVANTAGE: S2U
PCI EXPRESS FABRIC Interconnects all S2U modules. Provides maximum bandwidth with growth headroom for years to come.
OPENVPX Battle-hardened modules used in rugged aviation, naval, vetronics and space platforms.
No “practically-obsolete” commercial motherboards from offshore manufacturers are found in S2U.
INDUSTRY-STANDARD SSD DRIVES
Ubiquitous SATA and PCI Express drives are available in myriad densities and MTBF ratings.
This future-proofs S2U as the industry evolves to PCI Express SSDs.
PCIE CARD CAGE ANDAUXILIARY POWER
Commonly-available PCI Express (PCIe) computer boards plug right in. Or the modular card cage can be replaced with power supply/battery back-up for graceful shutdown in the event of power failure.
Both options maximize flexibility and make S2U easy to design with—or design into legacy programs.
OPENVPX POWER AND I/O MODULES
A smaller version of S2U’s “motherboard” and communications modules, S2U relies onindustry-standard power supply modules with wide availability and voltage choices.
Power supply sparing becomes off-the-shelf. Add-in industry-standard 3U OpenVPX I/O and co-processor boards substantially extend “King Cobra” functionality.
CISCO® MOBILEREADYNET ROUTER
The world’s most trusted router software in S2U assures interoperability with battlefield LANs and WANs.
Software programmability protects attack surfaces as the cyber-threat grows, allowing S2U’s capabilities to grow with the network and cyber security needs.
ADD-IN I/O OPTIONS S2U contains at least 20 different ways to add I/O and new functions to the server. Various modules are dual-use, can be swapped out for other functions, or are ready to accept new capabilities.
No other server has this much flexibility…in such a small space.
S2U “KING COBRA” ADVANTAGE
2U
1U
1U1U
2U
UPS/APU 2U KING COBRASERVER
ROUTERSWITCH
STORAGE
COMPARABLEFUNCTIONALITY
GMSS2U “KING COBRA”
S2U “KING COBRA” (FRONT)- Storage / SAM™ I/O Subsytem- 3U OpenVPX Power Supplies / Custom I/O Subsystem- System I/O Module- Cooling Subsystem (2 of 2)
S2U “KING COBRA” (BACK)- 6U OpenVPX CPU Module- 6U OpenVPX COM Module- PCIe or 1500W Power Supply w/APU Subsystem- Cooling Subsystem (1 of 2)
AC/DC Power
User Custom I/O
AC/DC in / FanPower / Control
Fan Power/ Control
AC l2Cl2C
GigE
(x2)
1x P
CIe
(x4)
USB
(x4)
l2C (x
2)
l2C (x
3)l2C x1
PCI
e (x4
)
x12
SATA
x16
PCIe
x16
PCIe
l2CSATA
(x4)
x4 P
CIe
(x7)
x4 P
CIe
x8 P
CIe
l2C (x
2)
SATA
(x8)
x4 P
CIe
x16
PCIe
x16
PCIe
x16
PCIe
l2C x4 P
CIe
l2C (x
6)
SAM
I/O
XMC
I/O
GP I/
O
x4 P
CIe
SAM
I/O
RST
RST
User Custom I/O
20 Port GigE w/POE+Dual 10 GigE (SPF+)
HDMIVideo
DualUSB 3.0
DualUSB 3.0
DualGigE
Dual 10 GigE(SPF+)
100Base-T
Display/Keypad SSD/XMC AC/DC Power or PCIe Front Panel I/O
SmartFans
(x6)Each with
IndependentRPM/Speed
Control
SmartFans
(x6)Each with
IndependentRPM/Speed
Control
System I/O Module Storage / SAM™ I/O Subsystem12x SATA / NVMe SSD Devices / SAM™ I/O Modules
COM ModuleCisco IOS®/ Palo Alto Router
16/20 GigE Ports w/POE+Two 10 Gigabit Ports3x SAM I/O Modules
CPU ModuleDual Xeon® E5-2695 v4 CPUs with:
Up to 36 CoresUp to 1024GB of RAM w/ECC
4TB Removable SSD or XMC Site Dual SAM™ Sites
80 Lanes of PCIe Gen 3
Custom I/O orPower Supply
Subsystem3 Slots
3U OpenVPX Card Cageor
Triple N+1(500W each)
3 Slot 6U OpenVPXCard Cage
6U OpenVPX Back Plane
3U OpenVPX Back Plane Switch Back Plane
12 Slot SATA / SAS / SAM I/O / PCIe Back Plane
Pow
er o
r 4 S
lot P
CIe
Back
Pla
ne
1500W Power Supply w/APUSubsystem
4 Slot Full Length PCIe Card CageSubsystem
P6 P5 P4 P3 P3 P3
GigE HDMI
Audio
DualUSB 2.0
DualUSB 3.0
Power/Reset/StatusLEDs
S2U KING COBRA - ULTRA-MODULAR, 100% LRU, 2U (SHORT RACK) NOITATSKROW / REVRES GENERAL MICRO SYSTEMS INC. (800) 307-4863 WWW.GMS4SBC.COM
S2U “KING COBRA” SYSTEM BLOCK DIAGRAM
General Micro Systems | S2U “KING COBRA” | pg. 6 gms4sbc.com
FEATURES:- Rugged, 6U OpenVPX dual slot air-cooled module
- Utilizes dual Intel® Xeon® E5-2695 v4 CPU with up to 18 Cores, each operating up to 2.1GHz
- Hyper-Threading on each core for a total of up to 72 logical cores
- Supports up to 1024GB of RAM with ECC up to 2133 MT/s
- 35MB unified instruction/data cache for each CPU
- Up to 80 lanes of Gen 3 PCIe and 8 lanes of Gen 2 PCIe for ultimate high-speed I/O expansion
- Two 10Gigabit Ethernet ports with Fiber/Copper via SPF+ connectors
- Two Gigabit Ethernet ports with TCP/IP off oad engine
- Support for one Enterprise Class x4 PCIe SSD with up to 2.4GB/s read and 1.2GB/s write speeds
- Support for one x8 XMC site (omit removable SSD)
- 4 USB 3.0 ports, eight GPI/O lines and HDMI video
- Baseboard Management Controller (BMC) for full system diagnostics and health management
- Front panel 144x16 LCD display with Up/Down, Left/Right keypad for system status
- Two SAM™ I/O modules for additional storage or off–the-shelf I/O such as Wi-Fi, cellular and more
- 16MB BIOS Flash and 2Kb EEPROM for FRU information
- Support for Trusted Platform Module (TPM) for secure operation (optional)
- Intel® Virtualization Technology (VT-x/VT-d2) and Trusted Execution Technology (TXT)
- Active Management Technology (AMT) for remote KVM functions
- Converged Platform Power Management (CPPM) for power saving
- Secure Erase (“zeroize”) for total erasure of all Flash devices, including BIOS
- Voltage and temperature monitoring, plus reporting
Up to
72Logical Cores
Dual, Ultra Fast
2.1GHz Processors
Up to
80LanesPCI Express
Up to
1024GBDDR4 DRAM w/ECC
6U VPX CPU MODULE
pg. 7 | S2U “KING COBRA” | General Micro Systems
The SBC provides two Special Application Module (SAM™) sites, which support two mSATA SSD devices that may be used to boot the Operating System (OS) with RAID functions. Additional SAM I/O devices such as GPS, MIL-STD-1553, CANBus, or other ExpressMini cards may be used as well.
Other I/O functions of the CPU module include: Baseboard Management Controller (BMC) for health monitoring and reporting via a dedicated Ethernet port, Trusted Platform Module (TPM), eight GPI/O lines, 16MB BIOS Flash, 2Kb of Field Replacement Unit (FRU) for configuration data, Real Time Clock (RTC) with field replaceable battery, and voltage/temperature monitoring.
A 144x16 pixel LCD display with Up/Down, Left/Right keypad is accessible on front panel to provide the status of the CPU module and user parameters. The CPU module also provides an incredible 80 lanes of PCIe Gen 3 support for I/O expansion via its VPX P1-P5.
ADDITIONAL DETAILSThe CPU Module is a dual slot OpenVPX module with front and rear I/O. Using Intel’s latest server processor, the CPU module supports dual Intel® Xeon® processors (E5-2695 v4), each with up to 18 physical cores with Hyper-Threading for a total of 72 logical cores operating at up to 2.1GHz with the ability to TurboBoost up to 3.3 GHz. To harvest this incredible CPU performance, each CPU is coupled with up to 512GB (1024GB total) of RAM organized in four banks. Each RAM bank consists of two DIMM arrays with Error Correcting Code (ECC). The ECC RAM provides 2-bit error detection with 1-bit of correction, and supports up to 2133 Mega Transfers per Second (MTS) between CPU and memory, resulting in an incredible peak memory transfer rate of over 80GB/s.
The CPU module also provides two 10Gigabit Ethernet ports via SPF+ connectors for Fiber or Copper support. Additionally, two Gigabit Ethernet ports, four USB 3.0 ports, and one HDMI video port are provided on the CPU module’s front panel. For custom I/O, the SBC provides one XMC site with x8 PCIe with front and rear panel I/O, or a 2.5-inch Enterprise class SSD device that is removable from the front with up to 2.4GB/s read and 1.2GB/s write speeds.
gms4sbc.com
CPU MODULE BLOCK DIAGRAM
CPU 2(Optional)
Intel Xeon®
E5-2695 v4 Processor
2.1GHz
XMC I/O or Removable 2.5" SSD
Intel® PCHTrusted Platform Module
POST
8MB BIOS x2
2KbEEPROM
CPLDLogic
Voltage/Temp Monitors
DualGigE
Dual GigE
Dual Mag.
SATASPI
SMbus
WP
DualUSB 3.0
Pass
/Fai
lPo
wer
Dual 10 GigE SFP+
Intel® Dual 10 GigE
HDMIVideo
BMC
DM
IPower
Supply/Power
Monitor
IPM
B/R
STVP
X Po
wer
Writ
e En
b.
JTA
G
P0P1P6 P3P5
GA
GPI
/O (x
8)
Res
et
x8 PCIe XMC or Removable 2.5" SSD
CPU 1 (Main)
Intel Xeon®
E5-2695 v4 Processor
2.1GHz
Eight DIMMSUp to 1024GB RAM w/ECC
2133 MTS
QPI 0
CPU 1Power Supply
CPU 2Power Supply
/16
P2P4
/16
PCIe
I2CBuff
SAM I/OSite-1
SATA
LPC
Buffers
I/O To P6SM
bus
SATA
(x8)
x16
PCIe
16x
PCIe
QPI 1
CH 0-3CH 0-3
QPI 0
QPI 1
/8
DM
I
/16
x4 P
CIe
VideoU
SBI/O XM
C I/
O
Dual USB 3.0
PCIe
x8 P
CIe
USB
RST
PCIe
PCIe
USB
I2C
Bus
(x6)
100 Base-T
USB
Ant
enna
-1A
nten
na-2
SAM I/OSite-2
SATA
USB
PCIe
I/OTam
per
/4
/8 /4
x16
PCIe
x16
PCIe
x8 P
CIe
/8
144x16 LCD Display w/ L/R UP/DN KP
Secu
re E
rase
USB
USB
General Micro Systems | S2U “KING COBRA” | pg. 8 gms4sbc.com
FEATURES:- Rugged, 6U OpenVPX single slot air-cooled module- Full-featured Cisco®/Palo Alto Embedded Services Router (ESR) with four Gigabit Ports (Optional)- Runs Cisco® IOS routing software, optimized for extreme environments- Supports Cisco Mobile Ready Net for infrastructure-less networking- Designed for mission-critical voice, video or data packets- Supports routing protocols: RIP (V1/V2), OSPF, EIGRP-IP, BGP and more- Fully managed enterprise Ethernet Layer 2 switch with Layer 3 features- 20 Gigabit Ethernet ports (16 w/Router), all with Power Over Ethernet (POE+) up to 150W- Two 10Gigabit Ethernet ports with Fiber/Copper via SPF+ connectors- Very low latency, VLAN support, QoS/differentiated services- Multicast and spanning tree capabilities- Security features for authentication and authorization- DHCP client and server support, and SNMP- Support for IEEE-1588 for packet time stamping (optional)- Internal shared memory with jumbo frame support- Web GUI and SNMP management interfaces provided for ease of configuration- Support for Multicast IPv4, IPv6 with IGMPv2/3 snooping and MLD- Bluetooth 3.0 support for ultra-fast wireless communication (eg: keyboard and mouse)- Three SAM™ sites for custom I/O (Wi-Fi/Bluetooth, GPS, cellular radios, and more)- Secure Erase (“zeroize”) for total erasure of all Flash devices, including BIOS- Voltage and temperature monitoring, plus reporting
Full Featured
Cisco®Embedded Router
Up to 20
GB-EPortswith POE+
2 Fiber/Copper
10GB-EOn the front panel
6U VPX COM MODULEUp to 3
SAM™I/OExpansion Sites
pg. 9 | S2U “KING COBRA” | General Micro Systemsgms4sbc.com
The COM Module is a 6U single slot OpenVPX module. It is connected to the CPU module via a x4 PCIe lane via VPX-P1. The COM module provides twenty Gigabit ports via a managed switch with Power Over Ethernet+ (POE+), and two SAM™ I/O sites for additional functions such as Wi-Fi, Cellular, Bluetooth and GPS.
The switch functions are controlled via a 416MHz MIPS processor with 128MB of DRAM. The MIPS processor controls up to twenty Gigabit Ethernet ports and two 10Gigabit Ethernet ports. The two 10Gigabit Ethernet ports are connected via SFP+ connectors to the COM module’s front panel, and support Fiber/Copper interfaces, which may connect directly to the CPU module’s 10Gigabit Ethernet port.
The managed switch supports Layer 2 and Layer 3 functions such as VLAN and QoS processing, enabling the delivery of differentiated services, security via intelligent frame processing, and egress frame manipulation. The switch may be configured via the host CPU USB/COM port that is connected internally or via a Gigabit Ethernet port on the rear panel. All twenty Gigabit Ethernet ports support POE+, which can provide up to 25W on each port up to 150W total.
The COM module supports a full-featured Cisco® IOS® software package with Mobile Ready Net to facilitate the most complex routing needs for security and compatibility with existing defense infrastructures. The Router is designed for battlefield applications and includes features to create and maintain both stationary and ad hoc networks with the highest quality-of-service (QoS). Moreover, it can adjust QoS based upon available bandwidth, resources, and available networks.
The Router provides Radio Aware Routing (RAR), Dynamic Link Exchange Protocol (DLEP), and IPv6. It supports routing protocols RIP (V1/V2), OSPF, EIGRP-IP, BGP and more, plus it supports up to 32 VLANs. Data packet encapsulations include PPP, PPPoE, GRE and 802.1q VLAN trunking.
The Router module portion of the COM Subsystem is based on a Quad Core Intel® Atom™ processor with 4GB of RAM and four Gigabit Ethernet ports. The COM module also provides one additional SAM™ I/O site for more I/O such as Wi-Fi, or GPS for time stamping of each data packet.
ADDITIONAL DETAILS
COM MODULE BLOCK DIAGRAM
P6 P1
Dual 10GigE SPF+
16 GigE Port W/POE+ (RJ-45)
SAM I/OTM-3BT 3.0
Power Supply/POE+ Power/
Power Monitor
IPM
B/R
ST
VPX
Pow
er
Writ
e En
b.
P0
GA
12 Port PCIe Sw
I/O I/O
CO
M
JTA
G
21 Port PHY
4 Port USB Cont.
SAM I/OTM-2(Cellular)
SAM I/OTM-1(GPS)
/1
x4 P
CIe
/1 /1
/4
Voltage/Temp Monitors
I2C
Ant
enna
-3A
nten
na-4
Ant
enna
-5A
nten
na-6
128 MB DRAM
16 MBFlash
8MBBIOS Flash
4 GB DDR3 RAMW/ECC
2KbEEPROM
SAM I/OTM-4(WiFi)
Magnetics
Pass
/Fai
l
P_G
ood
SAM I/OTM-5mSATA
System Logic
Test
IntelQuad Core
Atom Bay Trail
Up to 2GHz
4 Gig-E Port (RJ-45)
Mux
Magnetics
USB toCOM
Intel Quad GigE
USB toCOM
DVI VideoUSB
4 Port USB Cont.
Intel GigE
26 Port Intelligent Switch Layer II/III416MHz MIPS CPU
10GigE PHYw/FiberMagnetics with POE+PWR
/1
/1
USB
3
USB
2
USB
1
/1 /1/1
Router CPU(Optional)
Voltage/Temp Monitors
Gig
E 1
Gig
E 2
Gig
E 3
Gig
E 4
Gig
E 5
Gig
E 6
Gig
E 7
Gig
E 8
Gig
E 9
Gig
E 10
Gig
E 11
Gig
E 12
Gig
E 13
Gig
E 14
Gig
E 15
Gig
E 16
Gig
E 17
Gig
E 18
Gig
E 19
Gig
E 20
Gig
E 21
Gig
E 22
Gig
E 23
Gig
E 24
10G
igE
1
10G
igE
2
Ant
enna
-1
Ant
enna
-2
Test/Config
LPC Bus
SMBus
HDMIUSB 3.0
UART
PCIe x1
SPI
PCIe x1
PCIe x1
USB
SATA
FSB
133MHz
SMBI2C
Secu
re E
rase
Secure Erase
DualPHY
Gig
E 22
Gig
E 21
General Micro Systems | S2U “KING COBRA” | pg. 10 gms4sbc.com
- Supports up to four standard full-length/height x16 PCIe modules- Supports two dual height PCIe video cards from NVIDIA®/AMD® for max GPU performance- Supports standard hardware RAID controllers for ultimate performance and data reliability- Up to 600W of power provided to support the most demanding graphic/DSP applications- All four PCIe modules are easily removable and replaceable- Voltage and temperature monitoring, plus reporting
- Up to 1500W to power the entire S2U and charge APU batteries- APU allows orderly shutdown upon power interruption- High power/density batteries for maximum hold-time- Optional Super Caps power storage technology for airborne applications- Power monitor directly sends CPU to suspend-to-disk (S4) or shutdown- Supports 110/220 VAC or 28 VDC input power (MIL-STD-704F)- Fully enclosed canister for easy removal/replacement- Voltage and temperature monitoring, plus reporting
PCIe SUBSYSTEM
1500W POWER SUPPLY W/ APU
pg. 11 | S2U “KING COBRA” | General Micro Systemsgms4sbc.com
The PCIe Subsytem provides four full length/full height PCIe slots for industry-standard add-on modules. The Power Supply/Auxiliary Power Unit (APU) Subsystem provides normal and holdup power for the entire S2U. These two subsystems are installed independently. When the PCIe Subsystem option is used, power to “King Cobra” is supplied via the 3U OpenVPX Subsystem utilizing 3U OpenVPX power supplies. When the Power Supply/APU Subsystem is used, normal power is provided via this subsystem and backup power or orderly shutdown is provided via internal batteries or Super Caps. Besides providing backup power, choosing the Power Supply/APU in “King Cobra” makes available three slots in the 3U OpenVPX Subsystem to support user I/O modules.
The PCIe Subsystem is a function never seen before in any server. It is a removable subsystem that houses up to four full size, full height PCIe cards such as video cards, RAID controllers, DSPs, and many other ultra-high performance cards requiring the fastest throughput possible. Each site supports a x16 PCIe interface and gives rear panel access directly to I/O. Up to 600W of total power is provided for these four sites, making them capable of supporting the most power demanding applications.
The Power Supply/Auxiliary Power Unit (APU) is designed to provide backup power to the “King Cobra” for several minutes in order to prevent sudden shutdown, which can create catastrophic system errors and corrupt the file system. The Power Supply/APU Subsystem detects power brownouts and failure conditions, and provides a clean DC power supply to the S2U while forcing an orderly shutdown. BIOS settings allow the system to go to suspend-to-disk mode (S4 state) or full shutdown (S5).
The Power Supply/APU Subsystem may be ordered with a LiFePO4 type of battery for ground-based applications, or with Super Caps technology for airborne applications where batteries are prohibited.
The Power Supply/APU supports 110/220 VAC or 28 VDC input power (MIL-STD-704F), supports voltage and temperature monitoring with reporting, and may be easily removed via locking ejectors. When the Power Supply/APU is used the PCIe subsystem is omitted from the “King Cobra” (they are mutually exclusive).
ADDITIONAL DETAILS
PCIe MODULE BLOCK DIAGRAM
PCIe Slot-1Full length
96 Lanes24 Ports PCIe Gen 3 Switch
SATA
/SA
S (x
4)
PCIe Slot-2Full length
PCIe Slot-3Full length
PCIe Slot-4Full length
x16 PCIe
x16 PCIe
x16 PCIe
x16 PCIe
x16
PCIe
x16
PCIe
P10
Pow
er (6
00W
)
Power Supply/
Power Monitor
Voltage/Temp Monitors
SFF Connector
SATA
/SA
S (x
4)
SATA
/SA
S (x
4)
+12VDC SFF Connector
SFF Connector+12VDC
Frontpanel
Frontpanel
Frontpanel
Frontpanel
I2c
Bus
General Micro Systems | S2U “KING COBRA” | pg. 12 gms4sbc.com
- Up to 12 hot-pluggable 2.5” Drive Bays for storage or I/O devices- Each site supports 6Gbit/s SAS/SATA drives or x4 PCIe SSD drives- Each SSD supports up to 2.4GB/s read and 1.2GB/s write speeds- Supports SAS/SATA devices from CPU module or PCIe Subsystem- Supports hardware or software RAID 0,1,5,10,50 and custom- Supports up to 24 SAM™ modules for custom I/O- Voltage and temperature monitoring, plus reporting
The Storage/SAM™ Subsystem, provides twelve removable drive bays. Each drive bay supports standard 2.5-inch SAS/SATA drives or the new upcoming Enterprise class NVMe SSD drives which utilize x4 PCIe for the highest performance possible. Each Enterprise Class x4 PCIe SSD supports up to 2.4GB/s read and 1.2GB/s write speeds. The SAS/SATA interface is provided by the CPU module directly or from the PCIe Subsystem via a RAID host controller.No SATA port multipliers are used, thus each port is capable of full SATA III speeds of up to 6 Gb/s, and supports RAID 0,1,5,10 and 50.
These twelve sites also support the new SAM™ I/O modules from GMS. Since each site has x4 PCIe lanes as well as SAS/SATA support, ultra-fast I/O devices such as dual HD video capture, DSP, FPGA, and other high-performance video functions may be added.
GMS will be supplying a variety of high-speed I/O modules to support a wide array of standard or custom functions.
REMOVABLE STORAGE /SAM™ I/O SUBSYSTEM
ADDITIONAL DETAILS
STORAGE/SAM™ I/O BLOCK DIAGRAM
Back Plane
P1
Po
wer (
600w
)
Power
Supply/
Power
Monitor
Voltage/
Temp
Monitors
Power (600W)
ESSD/SAS/
SATA/
SAM-I/O
Site-1
ESSD/SAS/
SATA/
SAM-I/O
Site-4
ESSD/SAS/
SATA/
SAM-I/O
Site-3
ESSD/SAS/
SATA/
SAM-I/O
Site-2
SB
C S
ATA
/SA
S
x4 P
CIe
MUX
PC
Ie S
ATA
/SA
S
SA
TA
/SA
S
Acti
vit
y
SB
C S
ATA
/SA
S
x4 P
CIe
MUX
PC
Ie S
ATA
/SA
S
SA
TA
/SA
S
Acti
vit
y
SB
C S
ATA
/SA
S
x4 P
CIe
MUX
PC
Ie S
ATA
/SA
S
SA
TA
/SA
S
Acti
vit
y
SB
C S
ATA
/SA
S
x4 P
CIe
MUX
PC
Ie S
ATA
/SA
S
SA
TA
/SA
S
Acti
vit
y
I2C
ESSD/SAS/
SATA/
SAM-I/O
Site-12
SB
C S
ATA
/SA
S
x4 P
CIe
MUX
PC
Ie S
ATA
/SA
S
SA
TA
/SA
S
Acti
vit
y
pg. 13 | S2U “KING COBRA” | General Micro Systemsgms4sbc.com
REMOVABLE STORAGE /SAM™ I/O SUBSYSTEM
- Gigabit Ethernet port for Remote Management and status- Two USB 3.0 and two USB 2.0 ports with power- HDMI Video with Audio- Line-In, Line-Out Audio- 24 bicolor Status indicators with recessed Power/Reset switch- Voltage and temperature monitoring, plus reporting
The System I/O Module provides the basic system level functions. It provides two USB 3.0 and two USB 2.0 ports with power, HDMI video, and audio to support the user interface, as well as a dedicated Gigabit Ethernet port (not connected to the COM Board Switch) for remote control and configuration. The System I/O provides 24 bicolor LED indicators to alert the user about the status of each
segment of the “King Cobra”. Five bicolor LEDs are also used to indicate power/system status (Power Supply 1-3, Pass/Fail, Good Power and Sleep/Suspend-to-disk (S3/S4)). Twelve LEDs indicate the status of each Drive Bay/SAM™ module. Two more LEDs indicate the status of each of the Smart Fan trays, while four more additional sets indicate user status.
SYSTEM I/O MODULE
ADDITIONAL DETAILS
SYSTEM I/O BLOCK DIAGRAM
P1
Dual USB 2.0 Audio
Pow
er (2
0W)
Line
-Out
/Hea
dpho
ne
Line
-In/M
ic
x1 P
CIe
Dual USB 3
DualUSB 3.0
HDMIVideoGigE
Power Supply/Power
Monitor
x1 P
CIe
GigE
Magnetics
PIC uCont
Pass
/Fai
l
PS-1
PS-2
PS-3
SAM
-1
SAM
-2
SAM
-6
SAM
-4
SAM
-3
SAM
-5
SAM
-7
SAM
-8
SAM
-12
SAM
-10
SAM
-9
SAM
-11
Res
et/P
ower
Fan-
2
Use
r-3
Use
r-1
Use
r-2
Use
r-4
USB HD AudioCODEC
Video(Optional)
x1 P
CIe
x1 P
CIe
Fan-
1
S3/S
4
Pow
er O
n
4 port USB 2.0
Voltage/Temp Monitors
I2C
SAM
I/O
Act
ivity
(x12
)
General Micro Systems | S2U “KING COBRA” | pg. 14 gms4sbc.com
- Supports up to three 3U OpenVPX sites- Up to 3 redundant, hot-swappable 3U OpenVPX Power Supplies- Four x1 PCIe and four USB ports to the 6U OpenVPX backplane- Supports 110/220 VAC or 28 VDC (MIL-STD-1275) input power- Voltage and temperature monitoring, plus reporting
The Power Supplies/Custom I/O Subsystem is a 3U OpenVPX subsystem. It supports three standard 3U OpenVPX modules or OpenVPX Power Supply modules. If power is supplied via the APU Subsytem, all three OpenVPX sites may be used for user I/O. If the PCIe Subsystem is used, then a minimum of one Power Supply
module is required to power the system. Each Power Supply module provides up to 600W of power. For redundant power or when high power PCIe modules and SSDs are required, two additional power supplies can be added. These power supplies are hot-swappable and support 110/220 VAC or 28 VDC (MIL-STD-1275).
CUSTOM I/O SUBSYSTEM / POWER SUPPLIES
- Supports two Fan Trays for redundant cooling- Each tray supports six Smart Fans, with RPM/speed control- Precision cooling ducts for uniform airflow- Intelligent fan controller for optimum control over each fan- Voltage and temperature monitoring, plus reporting
The Cooling Subsystem consists of two Fan Trays, each with six ultra-high-speed fans with programmable speed and a tachometer to verify fan operations. These high-speed fans are individually
controlled via a microcontroller to deliver the optimum cooling for every section on the “King Cobra”.
COOLING SUBSYSTEM
ADDITIONAL DETAILS
ADDITIONAL DETAILS
pg. 15 | S2U “KING COBRA” | General Micro Systemsgms4sbc.com
ABOUT GENERAL MICROSYSTEMS:TRUSTED AND DEPLOYEDGeneral Micro Systems (GMS) creates exceptionally innovative products, trusted and deployed through 35+ years of credibility, hundreds of defense, industrial and medical customers, and thousands of successfully deployed systems.
GMS systems are distinguished by their ultra-rugged designs and highest density compute and I/O performance per cubic inch.
A trusted Intel® partner since 1986, GMS is the standard bearer in modular compute- intensive, highest I/O density, highest performance-per-volume, and rugged small form-factor embedded computing systems, servers, and switches. The majority of GMS products are fanless and conduction cooled.
Designed from the ground up to provide the highest performance and functionality in the harshest environments on the planet, the company’s highly customizable products include GMS Rugged DNA™ with patented RuggedCool™ thermal cooling technology.
GMS systems are ideal for demanding C4ISR defense, aerospace, medical, industrial, and energy exploration applications. GMS is an IEC, AS9100, and MIL-SPEC supplier with infrastructure and operations for long-life, spec-controlled, and configuration-managed programs. Our Quality Manual, certifications, and further documentation about our rugged infrastructure is available upon request.
These are only a few of the groundbreaking achievments we have logged over the past 35 years.
GMS MILESTONES
Benjamin K. Sharfi (and Boo)Founder / CEO
YEAR TECHNOLOGY RELEASED
1979 First SBC Products: EXORbus Single Board Computers (6502, 6802, Z80)
1984 - 1990 Introduced First VMEbus SBC Products (68000/68010/68020/68030/68040/68060)
1991 - 2000
The First To Introduce a Processor Independent SBC with Upgradeable CPU
First VME MicroSPARC® & SuperSPARC® SBC with VME64
First To Release Dual Pentium® Processor SBC
First To Release Dual PowerPC® SBC
2001 - 2016
First to Ship Field-Upgradeable Pentium®-M based SBC
First to Ship Smallest, Lightest Core 2® Duo™ Rugged Systems
First to Ship Smallest Footprint Ultra-Rugged Systems with Removable Storage
First to Ship Ultra-Rugged Tablet Computer with Removable Storage
First to Ship Ultra-Rugged Servers with Support for Six Secure Virtual Machines
First to Ship Ultra-Rugged Dual Fully-Isolated Systems in One Box
First to Ship Xeon® Based Ultra-Rugged Server
First to Release Ultra-Rugged Smart Display from 10” to 65”
First to Ship Ultra-Rugged Server with Integrated Router and Managed Switch
First to Release 100% LRU Modular Server S2U “KING COBRA”