Upload
sophia-pereira
View
213
Download
0
Tags:
Embed Size (px)
Citation preview
With over 200,000 Antennas sold and/or deployedit should be obvious that we know what we are doing! We are proud of our working relationships with our customers.
We supply some of the Largest companies in North America but are happy to work with those in the start up phase as well.
We want to work with you and your customers to make sure that they choose the right antenna for their project. Its what makesor breaks their Orbcomm experience!
A few InevTechInevTech FIRSTSFIRSTS:
1)1) FIRSTFIRST to bring “Ruggedized” antennas to the Orbcomm world.
2)2) FIRSTFIRST to bring tri and quad-functional antennas (ie: VHF+GPS+GSM+2.4GHz)
<circa: 2005> to the Orbcomm World.
3)3) FIRSTFIRST to bring low profile antennas to
commercially acceptable price and performance levels.
4)4) FIRSTFIRST to offer all-in-one products
(i.e.: solar cell + batteries + antenna + radio)
MPR “Bar” Antennas
Best All Round Antenna in the Marketplace: Suited For:
Side or Front mount on trailers, containers.
Surface mount on trucks, buildings.
Pros:
- Low profile and Rugged! (Works and survives where whip antennas and others may not.)
- Ground independent! <ie: Fibreglass roof on Truck ref: LoJack Argnetina (use of a ground plane yields better performance.)
Performance: (on a ground plane) 87%87% of Reference ½ Wave Whip (Best Low Profile Antenna commercially available!)
Product Description: VHF / GPS Low-profile antenna for use with the Orbcomm satellite system.
Part No: MPR-2
GPS component contains an integrated LNA.
Antenna designed for operating in very rugged conditions such as mobile transportation equipment. It is internally filled with closed cell foam that seals the internal elements from moisture and protects them from vibration and impact trauma. (Can be used instead of ½ Wave Whip in fixed site locations.) Bottom and End Feed versions.
Note: Either or both GSM and 2.4 GHz (WiLAN) antennas can be added within the radome. (becomes MPR-3 or MPR-4)
MPR DescriptionMPR Description
Inevitable MPR Specifications
Receive band: 137 – 138 MHzTransmit band: 148 – 150.05 MHzVS WR (on metal):
< 1.5:1 within each band, not to exceed 2.5:1 anywhere in-band
Impedance: 50 ohmsPower g ain: -1 dBiRadiation pattern:
Non-directional
Polarization: VerticalRated power: 20 W continuousC onnector: BNC female bulkhead
(alternatives available by factory order)
Inevitable's FLAT PANEL (FPA) AntennaInevitable's FLAT PANEL (FPA) Antenna
Suited For
Side, Front or Top mount on trailers, containers, etc.
Surface mount on trucks, buildings.
Pros
Lower profile than MPR antennas and whips. Its also Ruggedized.
- Ground independent! (use of a ground plane yields better performance.)
Performance (on a ground plane) ~71%~71% of reference ½ Wave Whip (Better than ¼ Wave Whip Antennas, yet lower profile.)
Inevitable’s FPA Antenna
Size: 8” X 10” X 2.5” (203mm X 254mm X 64mm)
Options: VHF Only, VHF+GPS, VHF+GPS+GSM