The Quarry Device of ed leedskalnin

Embed Size (px)

Citation preview

  • 8/12/2019 The Quarry Device of ed leedskalnin

    1/16

  • 8/12/2019 The Quarry Device of ed leedskalnin

    2/16

    2

    Edward Leedskalnins Quarry Device- Quarry device components and Quarry device dimensions-

    2

  • 8/12/2019 The Quarry Device of ed leedskalnin

    3/16

    There are presently two opinionsthat attempt to answer this question; one, my

    homemade device is a winch, or two, it is a surveyinginstrument. This interpreter believes otherwise. According

    to him, I allegedly used the device to cut, carve, weld,electroplate, and reduce the effects of

    gravity on limestone rock.

    Greetings, my name isEdward Leedskalnin. I built Coral

    Castle in Homestead Florida. You may bewondering what this device is

    standing next to me?

    3

  • 8/12/2019 The Quarry Device of ed leedskalnin

    4/16

    The interpreter willshow many interesting facts about

    my device. At first, these facts may seemdisconnected to the reader. As the interpretation

    progresses from topic to topic, the reader will see aclear picture emerge. He is confident the reader will

    synthesize the following material, and seethe underlying intent of why and

    what I did at Coral Castle.

    4

  • 8/12/2019 The Quarry Device of ed leedskalnin

    5/16

    The interpreter believes the followinginformation will reveal the hidden secrets to my

    Quarry device. If you look closely at the highlighted regions of the Quarry device, you will see

    three distinctive electromagnetic coils.

    Coil number one is the largest of all three coils. Itis wound around a long iron shaft. The coil and itsshaft are located at the top of the Y shaped tree

    branch you see in this picture.

    I carved the left branch about mid way down intothe shape of an extended ellipse. Upon this

    ellipse, I wound coil number two. It has no ironcore. It is unusual because a majority ofelectromagnetic coils have iron cores.

    Based on transformer theory, coupling two coilswithout iron is not optional. Henceforth, the

    interpreter believes my device is not atransformer. Instead it is used to collect,

    concentrate, and focus the magnetic force to a

    given location.

    Coil number three is wound around the lowestpart of the tree branch. If you look below thelarge hole I drilled into the branch, you will seethe third coil. This coil is also without an iron

    core. Its shape appears more rectangular than theother two coils.

    Coil 1

    5

  • 8/12/2019 The Quarry Device of ed leedskalnin

    6/16

    Mother Coil

    Ed Coil

    My Sweet Sixteen Coil

    Coil names you will need to knowthem. The interpreter is convinced I

    personified them in the book Iwrote titled, A Book in Every Home.

    The Mother and Sweet Sixteennames are used extensively in thisbook. I also mention myself when I

    describe the affectionaterelationship I have for my SweetSixteen. The interpreter insists

    these names are my way ofpersonifying the Quarry device coils.

    To him these names are not namesof persons, but names ofelectromagnetic coils.

    Coil number one, at the top, iscalled the Mother coil . The secondcoil on the left of the Quarry deviceis my Sweet Sixteen coil . The lowest

    of the three coils is the Ed coil .

    Note: Form this point forward, thereader must assume the interpreterwill present his interpretation as if

    he was speaking through Ed. In latersections, quotes will be used when

    the material is not a personalinterpretation of the interpreter.

    6

  • 8/12/2019 The Quarry Device of ed leedskalnin

    7/16

    Expanded Views of the Mother, Sweet Sixteen, and Ed Electromagnetic Coils

    Mother

    7

  • 8/12/2019 The Quarry Device of ed leedskalnin

    8/16

    5 f

    t .

    7 i n

    . ( 6 7

    i n

    . )

    1

    2

    3

    4

    5

    6

    0

    .

    Certificate ofNaturalization

    In spite of conflicting researchdata regarding my height, we

    are going to use my citizenshiprecord for the following.

    In my citizenship record, I amfive feet seven inches tall. Thisdocumented height can be

    used as a means for creating ascale for approximate

    measurements.

    The scale, in turn, can be usedfor determining component

    dimensions of my Quarrydevice.

    ScaleWhole number

    intervals on ruler= 12.76 inches

    8

    http://www.code144.com/zkorallu7.jpghttp://www.code144.com/zkorallu7.jpghttp://www.code144.com/zkorallu7.jpghttp://www.code144.com/zkorallu7.jpg
  • 8/12/2019 The Quarry Device of ed leedskalnin

    9/16

    1.3 x 12.76 = 16.59 inches

    Here are the approximatehorizontal dimensions of each coil.The Mother coil is 16.59 inches. The

    Sweet Sixteen coil is 3.96 inches.The Ed coil is 7.66 inches.

    9

  • 8/12/2019 The Quarry Device of ed leedskalnin

    10/16

    The coil angles are important. There is asimple reason for their respective angularplacements. These angles are an aspect ofinteracting magnetic forces. The collectivemagnetic field, produced by the Quarrydevice coils, is the determining factor for

    their relative angular positions.

    One of these angular positions of alignmentis the projection of the center of Sweet

    Sixteens magnetic field. This fieldprojection intersects the end of the

    mamma coils winding. This projection isportrayed in the picture as a red arrow. The

    arrow is drawn through the axis of themagnetic center of the Sweet Sixteen coil.

    Center axis of the SweetSixteen Coil.

    Left end of theMother Coil.

    10

  • 8/12/2019 The Quarry Device of ed leedskalnin

    11/16

    The Ed coil

    Here is the magnetic fieldprojection of the Ed coil. The center

    of the Ed coils projection intersects nearthe center of the Mother coil, as

    shown by the red arrow.

    11

  • 8/12/2019 The Quarry Device of ed leedskalnin

    12/16

    Make a perpendicular line onthe opposite end of the Mother coil where

    Sweet Sixteens field projection intersects. Please notethe center of the Ed coil projection is about 8

    degrees from that perpendicular.

    Note: In another section of thisinterpretation , the tilt of the Ed coil with

    respect to the Mother coil (described above)will be used to help identify the Ed coil

    sculpture at Coral Castle.

    12

  • 8/12/2019 The Quarry Device of ed leedskalnin

    13/16

    The mamma coil is a radius of a circle whosecircumference contains the center of

    Sweet Sixteens coil.

    13

    Sweet Sixteens center lies on thecircumference of a circle.

  • 8/12/2019 The Quarry Device of ed leedskalnin

    14/16

    Sixteen pointed rimof the moon

    fountain

    The center of Sweet Sixteen has adistance of approximately 1/16 of a

    sector of the sixteen sectors in a

    sixteen pointed star (22.5 degrees persector). It appears to be slightly more

    than 22.5 degrees.

    This can be seen if you draw aperpendicular line from the left center

    end of the Mother coil, and drawanother line from the same origin tothe center of the Sweet Sixteen coil.

    14

    http://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintourhttp://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintourhttp://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintourhttp://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintourhttp://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintourhttp://www.code144.com/photos/index.php?show=cc47.jpg&id=46&tag=maintour
  • 8/12/2019 The Quarry Device of ed leedskalnin

    15/16

    1

    2

    3

    4

    5

    6

    0

    ScaleWhole number intervalson ruler = 12.76 inches

    Draw a perpendicular line,beginning at the end of the Mother coil, and

    project this line to the center of the Ed coil. You willsee the distance from the center of the Ed coil to

    the center of the Mother coil is 5.5 in. x

    12.76 in. or 70.18 inches.

    15

  • 8/12/2019 The Quarry Device of ed leedskalnin

    16/16

    16