The Only Spray On Lining

LIFETIME GUARANTEE

SPRAYED ON 3 – 5mm THICK

NON SKID SURFACE KEEPS LOAD IN PLACE

PREVENTS RUST & CORROSION

OUTPERFORMS ALL DROP IN LINERS

BENEFITS OF TUFF GUARD POLYURETHANE LININGS

TUFF GUARD is the South African leader in sprayed-on polyurethane linings for bakkies, trailers, boats and many more surfaces.

For 2 decades TUFF GUARD has been providing vehicles with a thick layer of protection under the most rugged conditions. The unique flexible and textured surface reduces cargo slippage and will not crack, warp or peel even under temperature extremes.

Sprayed on up to 5mm thick, TUFF GUARD polyurethane linings form a permanent air and watertight seal when sprayed directly onto the bin.

TUFF GUARD polyurethane provides a permanent surface for bakkies, trailers, vans, boats and virtually any high-wear area.

Sprayed-on polyurethane bonds directly to the surface to form a permanent, watertight / airtight protection against rust and corrosion.

Water can’t seep under the lining.

WHAT IS POLYURETHANE?

Polyurethane is a combination of two chemicals that when combined form one of the most durable products in the world. Sprayed on by means of a highly sophisticated method the end result is a seamless lining with the highest resistance against chemicals, rust and dents, etc.

POLYURETHANE IS BETTER THAN RUBBER BECAUSE:-

1. It will not perish

2. It will not oxidise or give off black

3. Polyurethane has no joints

4. Rubber will soften from oil, diesel, etc – not so with polyurethane

5. Rubber is glued on – polyurethane is sprayed on giving total surface bondage even after damage

6. Rubber does not prevent rust

7. Rubber can not be repaired easily

8. Rubber takes two days to dry and seven days to cure

WHY USE POLYURETHANE FOR BODY PROTECTION?

1. Take a normal LDV, you can lengthen the lifespan as well as increasing the value for a nominal outlay

2. You get a lifetime warranty

3. Enhances vehicle appearance

4. Easier to keep clean

5. Protects the body from impact damage and dents

6. Protects goods and prevents them sliding around

7. Shows no scratch marks

8. Protects against rust

9. Resistant to chemicals

10.Will not perish

11.One day service

POLYURETHANE IS BETTER THAN SOLID DROP IN LININGS BECAUSE:-

1. Solid linings allow water seepage, condensation and rust

2. Solid linings show scratch marks

3. Solid linings must be removed every six months

*Bakkies *Cattle feeding troughs *Horse trailers *Game trucks *Soundproofing of vehicles *Water tanks *Workshop benches, etc.

Real load bin protection doesn’t “drop in”

… It sprays on

Real load bin protection doesn’t “drop in”

… It sprays on

Won’t Crack, Peel or Warp…

TUFF GUARD’s sprayed on load bin linings outperform all plastic drop-in liners, rubber mats and paint like coatings. It gives your

bakkie real bin protection. The slippery drop-in liners crack, peel and warp and remove surface paint from your bakkie as they shift

and rattle in the bin.

They also trap moisture between the liner and the bin, increasing the risk of rust and corrosion.

Nothing protects your load bin like a real TUFF GUARD lining

Eliminate the need for Drop In Liners

Watertight seal to bin linings prevents rust and corrosion

Resists scratches and abrasion

Contour fit insulates load bin from noise and road vibrations

Permanently attaches; cannot be stolen

Will not crack, split or warp

Virtually no loss of space

Maintenance free

Textured, flexible surface reduces load slippage

In the event of accident, surface is repairable

Sprayed on Lining

Drop in Liner

YES

YES

YES

YES

YES

YES

YES

YES

YES

NO

NONO

NO

NO

NO

NO

NONO