1

The number of publications by faculty members of IIT Bombay are steadily increasing. From 804papers published in national and international journals during the year 2009-10, there is an increase of 50% in mere five years, taking the total number of papers published to 1206 in the year 2013-14. Similartrends can be observed for the papers presented in conferences, books and chapters in books authoredby the Institute’s faculty, in the graph given below:

2009-2010 804 410 29 43

2010-2011 806 284 25 66

2011-2012 896 418 23 48

2012-2013 1026 530 29 50

2013-2014 1206 686 30 75

Detailed list of publications for the year 2013-14 follows:

Year Papers inJournals

Papers inconferences

Chapters inBooks

Books

2009­2010 2010­2011 2011­2012 2012­2013 2013­20140

200

400

600

800

1000

1200

1400

Papers in Journals

Papers in conference

Books

Chapters in Books

Years

Num

ber of P

ublic

ati o

ns

233 A

2

Books/Monographs

Date Anil, W.“Introduction to Computational Fluid Dynamics , Ed.New York, Cambridge University Press, 2005, PaperbackSouth Asian Edition is available in India.

Date, P.P.“Introduction to Manufacturing Technologies,Principles and Practice, Ed. Mumbai, Jaico, 2010, pp.,For UG and PG curricula,

De, A.“Fundamentals of Welding and Processes,” Modellingof Thermal, Electrical and Mechanical coupling infusion welding, Ed. Lienert, T., Siewert T, Babu, S. S.and Ackoff V, ASM Handbook (Volume 6A), 2013,pp.789-796.

Desai Y.M., Eldho, T.I. and Shah, A.H.“Finite Element Analysis” – Text Book, Authors: Y.M.Desai, T.I. Eldho and A.H. Shah; published by PearsonEducation, Chennai, 2013.

Gedam, S. S.Chapter titled “Satellite Images For SustainableUrbanization”, Contributed as co-author with PriyaMendiratta in a Book Geographic Information Systemfor Smart Cities, Ed. TM Vinodkumar and Associates,Copal Publishing Group, New Delhi, 2014.

Ghorpade, S.R., Shastri, A.R., Srinivasan, M.K. andVerma, J.K. (Eds.)“Combinatorial Topology and Algebra,” RMS LectureNotes series, Ramanujan Mathematical Society,Mysore, Vol. 18, 2013.

Huang, C.-H., Padhye, L. P. and Wang, Y.-L.Catalytic Impact of Activated Carbon on the Formationof Nitrosamines from Different Amine Precursors, inInteractions of Nanomaterials with EmergingEnvironmental Contaminants, American ChemicalSociety, 2013, pp. 79-100.

Jindal, B., Bhattacharya, A., Panda, D.“Inhibitors of bacterial cell partitioning.” in Antibiotics-Targets, Mechanisms and Resistance (C. Gualerzi, L.Brandi, A. Fabbretti, L. Pon, eds.), Wiley-VCH, 2013,pp. 151-182.

Karunakaran K.P.“Rapid Product Development & Manufacturing, Ed.Mumbai, Internal Circulation, 2013.

“CNC Technology, Ed. Mumbai, Internal Circulation,2013

Limaye Balmohan V.“Functional Analysis”, Third edition, New AgeInternational Ltd., New Delhi, 2014.

Manu, B. and Chaudhari, S.Sequential Anaerobic-aerobic Treatment of Azo dyeWastewater”, Scholar press, Germany, 2014, p. 163.

Mukherjee S.Atlas of Shear Zone Structures in Meso-scale, Springer.Cham, 2013Deformation Microstructures in Rocks, Springer. Berlin,2013.

Patnaik, P., Mukhopadhyay, G. and Singh, P.P.“Study of Defect States in Silicon Carbide”, LAPLAMBERT Academic Publishing, 2013.

Rao, A.B.Total Sanitation Campaign’ intervention for a semiurban village through ‘public-people-private’partnership. India: Springer, 2014.

Sehgal, R.R., Banerjee, R.“Fabrication of nanomaterials for growth factor deliveryin tissue engineering”, in Nanomaterials in tissueengineering: Fabrication and applications. Ed.Gaharwar AK, Sant S, Hancock J, Hacking SA.Woodheld Publications, Cambridge 2013

Seshu, P.“Finite Element Method”, Ed. Prentice Hall of India,11th reprint in 2013.

Shastri Anant R.“Basic Algebraic Topology,” CRC Press (Talyor andFrancis Group), Boca Raton, London, New York, 2013.ISBN 13:978-1-62431( Hardback) 15+535 pages.

Solanki, C.S.“Solar Photovoltaic Systems and Technologies: Amanual for Technicians, Trainers and Engineers”, India:Prentice Hall of India, 2013.

“Solar Photovoltaic – A Lab Training Manual”, NewYork: Cambridge University Press India Pvt. Ltd., 2013.

Suryasarathi Bose, Bhattacharyya, A.R., Khare, R.A.,and Kulkarni, A.R.“Electrical Conductivity and Morphology ofPolyamide6/Acrylonitrile-Butadiene- StyreneCopolymer Blends with Multiwall Carbon Nanotubes:A Case Study”, in Handbook of Polymernanocomposites. Processing, Performance andApplication, Vol. B Carbon Nanotube Based PolymerComposites, pp 78-96, 2014.

XIAOYU FU and Sharma Vishnu D.“Cauchy problem for quasilinear hyperbolic systemsof shallow water equations”, Applicable Analysis(Taylor & Francis), Vol. 92, 2013, pp.2309-2319.

3

Edited Books/ Monograph

Choudhury Deepankar and Katzenbach Rolf“Editorial”, International Journal of GeoengineeringCase Histories, (ISSN: 1790-2045) USA, Vol. 3, 2013,No.1: pp. i-ii. doi: 10.4417/IJGCH-03-01-00.

Katzenbach Rolf and Choudhury Deepankar“ISSMGE Combined Pile-Raft Foundation Guideline”,ISSMGE TC 212 Design Guideline, Edited by, RolfKatzenbach and Deepankar Choudhury, publishedby Technische Universitat Darmstadt, Darmstadt,Germany, (ISBN: 978-3-942068-06-2; ISSN: 1436-6517), pp. 1-23.

Kulkarni Malhar“Recent Researches in Sanskrit ComputationalLinguistics,” edited by Malhar Kulkarni with ChaitaliDangarikar, DK Printworld, New Delhi, ISBN 13: 978-81-246-0698-8, 2013.

Malshe MilindModern Critical Theory (2nd Revised edition) MaujPrakashan, Mumbai, V.

Narayanan, N.C., ed.Water Governance and Civil Society Responses inSouth Asia, New Delhi: Routledge, 2014.

Panda, R. K.“Virtue of an Epistemic Agent: A Sradhanjali to ChitaBhai”, A New Morning with Chitta Ranjan: Adventuresin Co-Realization and World Transformation (ed.)Ananta Giri, Bhubaneswar: Siskhasandan, 2013, pp.81-84.

Rahardjo Paulus P., Deepankar Choudhury andWidjaja Budijanto“Proceedings of the International Conference on ‘Stateof the Art of Pile Foundation and Pile Case Histories’PILE – 2013", Edited by Paulus P. Rahardjo, ChoudhuryDeepankar and Budijanto Widjaja, June 2-4, 2013,Bandung, Indonesia.

Raja, V.S.“A Century of Stainless Steels”, Eds. V. Kain, L.K.Singhal, K.P. Dwivedi, P. Easwaran, G.K. Dey, V.S. Raja,M. Kiran Kumar, Trans. Tech. Publications, India, 2013.

Chapters in Books

Anwar, D., Choudhary, A.K. and Saraswati, P.K.“Strontium isotope stratigraphy of the NarediFormation, Kutch basin, India,” Special PublicationGeological Society India, Vol.1, 2013, pp.298-306.

Arya, S.B., Raja, V.S. and Tiwari, A.N.“A Comparative Study of Semiconducting Behavior ofPassive Films of High Nitrogen and Ni and Mn freeStainless Steels in A Century of Stainless Steels”, Eds.V. Kain, L.K. Singhal, K.P. Dwivedi, P. Easwaran, G.K.Dey, V.S. Raja, M. Kiran Kumar, Vol. 794, AdvancedMaterials Research, Trans Tech Publications, India,pp. 626-631, 2013.

Asolekar, S.R., Kalbar, P.P., Chaturvedi, M.K.M. andMaillacheruvu, K.“Rejuvenation of Rivers and Lake in India: BalancingSocietal Priorities with Technological Possibilities” inVolume 4 - Sustainability of Water Quality Ed. JeraldSchnoor in Comprehensive Water Quality andPurification Edited by Satinder Ahuja, 2013.

Bajoria Kamal M. and Jadhav Priyanka A.Buckling of Simply Supported Piezoelectric FGM PlatesSubjected to Electro-Mechanical loading using Higher-order Shear Deformation Theory, Advanced MaterialResearch, Manufacturing Science and Technology III,Trans Tech Publications, Switzerland, Vols. 622-623,2013, pp. 200-205.

Bandyopadhyay, S.“Applications of Pinch Analysis in the Design ofIsolated Energy Systems” In Handbook of ProcessIntegration (PI), ed. J. J. Klemeš, Woodhead Pub. Ltd.:Cambridge, UK, 2013, pp. 1038-1056.

Bhargava, P.“Examining Impact of Particle DeagglomerationTechniques on Microstructure and Properties ofOxide Materials through Nanoindentation”,Nanomechanical Analysis of High PerformanceMaterials, Solid Mechanics and its Applications, Eds:Atul Tiwari, Springer, 203, pp. 231-250, 2014.

Bhat, P. R.“Foundation of Engineering Ethics” in ContemporaryEthical Issues in Engineering, Satya Sundar Sethy (ed.),IGI-Global, Scheduled for 2014.

Biplab Banerjee, Krishna Mohan Buddhiraju,Surender Varma Gadhiraju and Laxminarayana Eeti.“Building Extraction from High ResolutionMultispectral Satellite Images”, in Urban and RegionalData Management, C. Ellul, S. Zlatanova, M. Rumorand R. Laurini (eds.), CRC Press, May 2013.

4

Borkar V. S.Relative value iteration for stochastic differentialgames’, in Advances in Dy- namic Games, (V. Krivan,G. Zaccour, eds.) Birkh auser, New York, Vol.13, 2013,pp. 3{27}.

Chakraborty Paulomi“Gender, Women and Partition: LiteraryRepresentations, Refugee Women, and PartitionStudies,” In Routledge Handbook on Gender in SouthAsia, ed. Leela Fernandez, London and New York:Routledge, 2014. pp.41-52.

“The Refugee Woman and the New Woman:(En)gengering Middle-class Bengali Modernity and theCity in Satyajit Ray’s Mahanagar (The Big City, 1963),”in Being Bengali: At Home and in the World, ed. MridulaNath Chakraborty. London and New York: Routledge,2014, pp 69-91.

Chandrasekhar, E., Dimri, V.P. and Gadre, V.M.“Wavelets and Fractals in Earth System Sciences”,CRC Press, Taylor and Francis Group, ISBN-13: 978-1-4665-5359-0 (Hardback), December 2013.

Chatterjee Kaustav and Choudhury Deepankar“Seismic analysis of soil slopes using FLAC2D andmodified Newmark’s approach”, In Geo-Congress2014, Geotechnical Special Publication No. GSP 234,ASCE, Edited by A. J. Puppala, P. Bandini, T. C. Sheahan,M. Abu-Farsakh, X. Yu and L. R. Hoyos (ISBN 978-0-7844-1329-6), Reston, VA, USA, 2014, pp. 1196-1205.

Datta, S. N., Carl O. Trindle and Frances Illas“Theoretical and Computational Aspects of MagneticOrganic Molecules”, Imperial College Press, UK, 2013

Deo, M.C.“Neural Networks”, Ch. No. 400, Encyclopedia ofEstuaries, Springer, 2014.

“Soft Computing”, Ch. No. 361, Encyclopedia ofEstuaries, Springer, 2014.

Desai Sarika and Choudhury Deepankar“Deterministic seismic hazard analysis for greaterMumbai, India”, In Geo-Congress 2014: GeotechnicalSpecial Publication No. GSP 234, ASCE, Edited by A. J.Puppala, P. Bandini, T. C. Sheahan, M. Abu-Farsakh,X. Yu and L. R. Hoyos (ISBN 978-0-7844-1329-6),Reston, VA, USA, 2014, pp. 389-398.

Dey Santanu and Haria, K.J.“Generalized repeated interaction model and transferfunctions,” Oper. Theory Adv. Apl., Vol. 240, 2014, pp.111-135.

Garg, A. and Mishra, I. M.Removal of persistent organic compounds by wetoxidation process. In the Encyclopedia of

Environmental Management, ISBN: 1-4398-2927-6,Publishers: Taylor and Francis: New York, May 2013,pp. 1904-1912.

George Siby K.“The Interconnectedness Sensibility: Tribal Ethos andEnvironmental Ethics,” Nature, Culture andPhilosophy: Indigenous Ecologies of North East India,ed. Saji Varghese. New Delhi: Lakshi Publishers, 2014.

Gururajan M. P., Mitra M, Amol S. B. andChandrasekhar E.“Phase Field Modeling of the Evolution of Solid–Solidand Solid–Liquid Boundaries: Fourier and WaveletImplementations,” Wavelets and Fractals in EarthSystem Sciences, CRC Press, November 2013

Hingu, D., Rao Mallikarjuna, K.S., and Shaiju, A.J.“Evolutionary Games and Replicator Dynamics”,Advances in PDE Modeling and Computation: AnePublications, 2013, pp. 251 - 262.

Jayashri, T.N. and Punekar, N.S.“Downstream approaches to selectively enrich ordeplete cellulase components”, in Biotechnology:Beyond Borders, Deshpande M.V and Ruiz-Herera J.(Eds.), Proceedings of the Indo-Mexico workshop onBiotechnology, CSIR-NCL, Pune, Ch.24, 2013, pp.308-316.

Kathuria, V., Rajesh, R.S.N. and Sen, K.“Impact of Human Capital on ManufacturingProductivity Growth in India (Chapter 3)” in N.S.Siddharthan and K. Narayanan (eds.) Human Capitaland Development: The Indian Experience, Springer,2013. pp. 23-38.

“State-Business Relations and Productivity in IndianIndustry (Chapter 10)” in Kunal Sen (ed.) State-Business Relations and Economic Development inAfrica and India, Routledge, 2013, pp. 164-80.

“Has manufacturing dualism widened since 1991reforms in India (Chapter 3)” in S. Lazar (ed.) Twentyyears of Economic Reforms and Inclusive Growth inIndia, Cauvery Publications, Trichuriappalli, 2013, pp.43-52.

Khanderbad Mrunal A. and Rao Ramgopal V.“Bottom-Up Approaches for CMOS Scaling in theNanoscale Era”, Nanoelectronic Device ApplicationsHandbook, James E. Morris (Editor), Krzysztof Iniewski(Editor), Hardcover: 934 pages, Publisher: CRC Press;1 edition (Jun 18 2013), ISBN-10: 1466565233, ISBN-13:978-1466565234.

Khanna, A.S.“Synthesis and Characterization of Nano Particles, inNano-technology in Soil Science and Plant Nutrition”,TapanAdhikari, S.Kundu and A.Suba Rao,, (Eds.),Chapter 3, New India Pub. Agency, New Delhi, 2013.

5

“Effect of Nano-pigments on Coatings for SpecialCorrosion Protection Applications, in Nano-Technology in Soil Science and Plant Nutrition”, TapanAdhikari, S. Kundu and A. Suba Rao, (Eds.), Chapter 4,New India Pub. Agency, New Delhi, 2013.

“Selection of Materials for Oil and Gas Applications, inCorrosion and Materials in the Oil and Gas Industries”,Reza Javaherdashti, ChikezieNwaoha, and Henry Tan,Eds., Chapter 9, CRC Press, 2013.

“Corrosion Protection of Underground Gas/CrudePipelines, in Corrosion and Materials in the Oil andGas Industries”, Reza Javaherdashti, ChikezieNwaoha,and Henry Tan, Eds., Chapter 8, CRC Press, 2013.

Khanolkar, S. and Saraswati, P.K.“Palaeoenvironmental significance of rectilinearbenthic foraminifera in the Middle Eocene section ofMatanomadh sub-basin, Kutch,” Special PublicationGeological Society India, 1, 2013, pp.307-317.

Kondabagil, K.“Bacteriophage mediated bio-control in wastewatermanagement.” in Industrial and EnvironmentalMicrobiology, Studium Press, Chapter 30, 2014, pp.473-495.

Kumar, A., Klaus Mullen, John R. Reynolds andToshio M.“Poly(Oxythiophenes)” Anil Kumar, Sreelekha P.Gopinathan and Rekha Singh in “ConjugatedPolymers: A Practical Guide to Syntheses” RSCPolymer Chemistry Series, 2013.

Kumar, S. and Punekar, N.S.“High Throughput Screening of Dye-Ligands forChromatography”, in Protein Downstream Processing:Design, Development and Application of High andLow-Resolution Methods, Labrou, Nikolaos (Ed.)Methods in Molecular Biology, Humana Press, Vol.1129, Ch. 6., 2014, pp. 53-65.

Momaya, K.“A New Perspective for Industrial Competitiveness:Exploring the Role of IITs,” in OrganisationalFlexibility and Competitiveness, Springer, India, pp.91-102.

“Competitiveness Situation of a Key Segment in SolarPhotovoltaic Industry in India: An Exploratory Study,”in Organisational Flexibility and Competitiveness,Springer, India, 2013, pp. 73-90

Momaya, K. and Chachondia, S.“Technology Management to Accelerate Competi-tiveness Journey: Exploratory Case of a RenewableEnergy Focal Firm from India,” in Driving theEconomy through Innovation and Entrepreneur-ship, Springer India, 2013, pp. 51-61.

Mukhopadhyay, A., Raju, G.B. and Basu, B.“Ultra High Temperature Ceramics: Processing,Properties and Applications”, Chapter 3, MAX Phasesand Ultra-High Temperature Ceramics for ExtremeEnvironments. Eds: J. Low, Y Sakka and C Hu, IGIGlobal Publishing, Hershey, PA, USA, 2013.

Nagarajan, R.“Natural and Man-made disasters: Assessment andmanagement”, Capital Publishing Company, New Delhi,ISBN: 978-93-81891-10-0, pp. 499.

Naik Nisha, P. and Choudhury Deepankar“Comparative study of seismic ground responsesusing DEEPSOIL, SHAKE and D-MOD for soils of Goa,India”, In Geo-Congress 2014: Geotechnical SpecialPublication No. GSP 234, ASCE, Edited by A. J. Puppala,P. Bandini, T. C. Sheahan, M. Abu-Farsakh, X. Yu andL. R. Hoyos (ISBN 978-0-7844-1329-6), Reston, VA,USA, 2014, pp. 1101-1110.

Narayanan, N.C.“Pollution Abatement Strategies in River Ganga: AReview of GAP and Gaps in Emerging InstitutionalModels”, In Iyer Ramaswamy (Ed), Living Rivers,Dying rivers. New Delhi: OUP, 2014.

“Rural Urban Water Transfers: Conflict over the MansiWakal Dam in Udaipur, Rajasthan” In Joy, K.J., SuhasParanjape and Sarita Bhagat, Domestic Water andSanitation: Cases, Issues and Prospects, Pune: Forumfor Policy Dialogue on Water Conflicts in India, pp.131-150.

“Paradigm Shifts in Water Governance in South Asia:A Review,” in NC Narayanan, S. Parasuraman andRajindra Aryabandhu (ed), Water Governance andCivil Society Responses in South Asia. New Delhi:Routledge. New Delhi: Routledge, 2014, pp. 1-30.

“Foreign Assistance, Dependence and Debt: SanitationCase Study, Kandy, Sri Lanka,” in NC Narayanan, S.Parasuraman and Rajindra Aryabandhu (ed) WaterGovernance and Civil Society Responses in SouthAsia. New Delhi: Routledge. New Delhi: Routledge,2014, pp.144-169.

“Institutional Changes, Public Provision and DrinkingWater Supply in Kerala,” in NC Narayanan, S.Parasuraman and Rajindra Aryabandhu (ed) WaterGovernance and Civil Society Responses in SouthAsia. New Delhi: Routledge. New Delhi: Routledge,2014, pp.170-200.

Parthasarathy, A, Panchapakesan and Nagarajan R.“Text book of Engineering Geology”, Wiley India, NewDelhi, pp.504. ISBN: 978-81-265-4182.

Parthasarathy, D.“Law-breakers and Law-makers: Critical Legal Pluralism,Normative Subjects and Ecological Regimes in India”,

6

in Maarten Bavinck, Amalendu Jyotishi ed., Conflict,Negotiations and Natural Resource Management: ALegal Pluralism Perspective from India, Routledge,2014.

Pitale, S. and Sarma, V.“Marking Plural in Marathi,” in South and SoutheastAsian Psycholinguistics, edited by H. Winskel and P.Padakannaya, Cambridge University Press, January2014, pp.110-124.

Punekar, N.S.“Biotechnology education – What, when and how”, inBiotechnology: Beyond Borders, Deshpande M.V andRuiz-Herera J. (Eds.), Proceedings of the Indo-Mexicoworkshop on Biotechnology, CSIR-NCL, Pune, Ch.2,2013, pp.9-14.

Ranjan Kumar, Choudhury Deepankar and BhargavaKapilesh“Recent development in modeling, analysis and designof foundation systems subjected to blast loadingconsidering uncertainties”, Proceedings of theInternational Symposium on Engineering Uncertainty:Safety Assessment and Management (ISEUSAM –2012), Edited by, Subrata Chakraborty and GautamBhattacharya, published by Springer, (ISBN 978-81-322-0756-6, 978-81-322-0757-3), 2013, pp. 927-938. doi:10.1007/978-81-322-0757-3_63.

Saraswati, P.K.“Foraminiferal Study in India: A journey from taxonomyand time to ocean and climate,” in Bowden, A J, Gregory,F J and Henderson, A S (eds) Landmarks inForaminiferal Micropalaeontology: History andDevelopment, The Micropalaeontological SocietySpecial Publications, Geological Society, London, 2013,pp.207-216.

Sarma, V.Issues in the Acquisition of Tamil Verb Morphology.In South and Southeast Asian Psycholinguistics, editedby H. Winskel and P. Padakannaya, CambridgeUniversity Press, January 2014, pp.99-109.

Sebastian, C.D.“Vijnanavada,” Arvind Sharma (Ed), Encyclopedia ofIndian Religions, Dordrecht, Springer. URL: http://www.springerreference.com/docs/html/chapterdbid/309633.html

“Yogacara”, Arvind Sharma (Ed), Encyclopedia ofIndian Religions, Dordrecht, Springer URL: http://www.springerreference.com/docs/html/chapterdbid/309634.html

“Asanga”, Arvind Sharma (Ed), Encyclopedia ofIndian Religions, Dordrecht, Springer URL: http://www.springerreference.com/docs/html/chapterdbid/309628.html

“Bodhisattva,” Arvind Sharma (Ed), Encyclopedia ofIndian Religions, Dordrecht, Springer URL: http://www.springerreference.com/docs/html/chapterdbid/309629.html

“Alaya-vijnana”, Arvind Sharma (Ed), Encyclopediaof Indian Religions, Dordrecht, Springer: URL: http://www.springerreference.com/docs/html/chapterdbid/309627.html

Seena, V., Ray, P., Prashanthi, K., Kandpal, M., andRao Ramgopal V.“Polymer MEMS sensors”, Advanced Biomaterialsand Biodevices, Edition: Advanced Materials BookSeries, Publisher: WILEY-Scrivener Publishing, USA.,Editors: Ashutosh Tiwari, Anis N. Nordin. Year ofPublication: 2014.

Sharda, A., Jain, K.S. and Momaya, K.“Competitiveness Situation of a Key Segment in SolarPhotovoltaic Industry in India: An Exploratory Study,”in Organisational Flexibility and Competitiveness,Springer India, pp. 73-90.

Sharma, N., Mukhopadhyay, A., Sharma, V., Milind,M. and Pant, R. S.“Design and Field Trials of a Payload Recovery Devicefor Tethered Aerostats”, in Lecture Notes inMechanical Engineering, eds. R. P. Bajpai, U.Chandrasekhar and A.R. Arankalle, ISBN 978-81-322-1871-5, Springer India, pp. 79-84.

Shrivastava Mayank, Gossner Harald and RamgopalRao, V.“Towards Drain extended FinFETs for SoCapplications”, Series: Lecture Notes in NanoscaleScience and Technology, Vol. 17, Han, Weihua; Wang,Zhiming M. (Eds.), ISBN 978-3-319-02020-4, Springerpublication.

Shylamoni, P., Choudhury Deepankar, GhoshSiddharth, Ghosh A. K. and Basu Prabir C. Basu“Seismic ground response analysis of KK-NPP site inthe event of NCO earthquake using DEEPSOIL”, InGeo-Congress 2014: Geotechnical Special PublicationNo. GSP 234, ASCE, Edited by A. J. Puppala, P. Bandini,T. C. Sheahan, M. Abu-Farsakh, X. Yu and L. R. Hoyos(ISBN 978-0-7844-1329-6), Reston, VA, USA, 2014, pp.840-849.

Singh, H. B., Zade, S. S. and Panda A.“Synthesis of organotelluriumium compounds,”,TheChemistry of Organic Selenium and TelluriumCompounds,” Ed. Z. Rappoport. Chichester, UK, JohnWiley & Sons, Ltd: 2013, pp.181-275.

“Synthesis of Organoselenium Compounds,” TheChemistry of Organic Selenium and TelluriumCompounds, Ed.” Z. Rappoport Chichester, UK, JohnWiley & Sons, Ltd: , 2013, pp.1-180.

7

“NMR of organoselenium and organotelluriumcompounds,” The Chemistry of Organic Selenium andTellurium Compounds,” Ed. Z. Rappoport. Chichester,UK, John Wiley & Sons, Ltd: , 2013, pp.277-445.

Singh, T.N.“GIs and socio-economic Development,” in WTO, TRIPSand Geographical Indications (GIs), ed. T. K. Routand B. Majhi, New Delhi: New Century Publications,2014, pp.65-74.

Sudarshana, S., Anuradha, R., Prabha, V. L., Jayashri,T.N., Ahuja, M., Dave, K., Kumar, S., Keni, S., Mehta,K., and Punekar, N.S.“Manipulating Aspergillus niger Genome: A Journey”,in Advances in Industrial Biotechnology, Ram SarupSingh, Ashok Pandey & Christian Larroche (Eds.), IKInternational Publishing House Pvt. Ltd., Ch.2, 2013,pp.36-44.

Sunoj, R . B.“Covalent Activations: Rationalizing Reactivity andSelectivity in Iminium- and Enamine-CatalyzedReactions’ in Comprehensive EnantioselectiveOrganocatalysis: Catalysis, Reactions, andApplication”, Dalko (Ed.,), Wiley-VCH, 2013.

Theja Siva M. and Narayanan H.“On the notion of generalized minor in topologicalnetwork theory and matroids”, accepted LinearAlgebra and its Applications.

Verma, A.K. and Singh, T.N.“Influence of Young’s Modulus and Poisson’s Ratioon the Displacement around a Circular Tunnel,” in EarthSystem Processes and Disaster Management, (Ed. R.Sinha and R Ravindra), Springer Series: Society of EarthScientists Series 1, 2013, pp. 181-201.

Verma, A.K., Singh, T.N. and Bajpai, R.K.“Study of Thermo-Hydro-Mechanical processes at thepotential site of an Indian Nuclear waste repository,”in Rock Mechanics for Resources, Energy andEnvironment ed. M. Kwasniewski and D. Lydzb. CRCPress, 2013, pp. 531-536.

Verma, D.K., Hemachandra, N., Narahari, Y. andTew, J.D.“Winner Determination in Multi-unit ProcurementAuctions with Volume Discount Bids and Lead TimeConstraints”, Applications of Multi-Criteria and GameTheory Approaches: Springer London, 2014, pp. 289-315.

Vishal, V., Ranjith, P.G. and Singh,T.N.“Geomechanical attributes of reconstituted Indiancoals under carbon dioxide saturation,” in RockMechanics for Resources, Energy and Environmented. M. Kwasniewski and D. Lydzb. CRC Press, 2013,pp. 171-173.

Vyawahare Vishwesh A. and Nataraj, P.S.V.“Development and Analysis of Fractional-orderNordheim-Fuchs Model for Nuclear Reactor”, in thebook titled Fractional Calculus: Theory andApplications by Narosa Publishing, India, 2013. Editor:Prof. (Mrs) Varsha Daftardar-Gejji, Dept ofMathematics, University of Pune.

Articles in Journals

Abbas, E., et al. [ALICE Collaboration]“Performance of the ALICE VZERO system,” JINST ,Vol.8, 2013, p.10016, arXiv:1306.3130 [nucl-ex].

“Mid-rapidity anti-baryon to baryon ratios in ppcollisions at √ s = 0.9, 2.76 and 7 TeV measured byALICE,” Eur. Phys. J. C., Vol.73, 2013, p.2496,arXiv:1305.1562 [nucl-ex].

“Charmonium and e+ e- pair photoproduction at mid-rapidity in ultra-peripehal Pb-Pb collisions at √ sNN =2.76TeV,” Eur. Phys. J. C., Vol. 73, 2013, p.2617,arXiv:1305.1467 [nucl-ex].

“Centrality dependence of the pseudorapidity densitydistribution for charged particles in Pb-Pb collisions at√ sNN = 2.76 TeV,” Phys. Lett. B., Vol. 726, 2013, p.610,arXiv:1304.0347 [nucl-ex].

“J/Psi Elliptic Flow in Pb-Pb Collisions at √ sNN = 2.76TeV,” Phys. Rev. Lett. Vol.111, 2013, p.162301,arXiv:1303.5880 [nucl-ex].

Abelev, B.B. et al. [ALICE Collaboration]“Measurement of quarko- nium production at forwardrapidity in pp collisions at √ s= 7 TeV,,” arXiv:1403.3648[nucl-ex].

“Performance of the ALICE Experiment at the CERNLHC,” arXiv:1402.4476 [nucl-ex].

“Production of charged pions, kaons and protons atlarge transverse momenta in pp and Pb-Pb collisions at√ sNN = 2.76 TeV,” arXiv:1401.1250 [nucl-ex].

“Measurement of charged jet suppression in Pb-Pbcollisions at √ sNN = 2.76 TeV,” JHEP, Vol.1403, 2014,p.013.

“Centrality, rapidity and transverse momentumdependence of J/Ψ suppression in Pb-Pb collisions at√ sNN = 2.76 TeV,” arXiv:1311.0214 [nucl-ex].

“Two and Three-Pion Quantum Statistics Correlationsin Pb-Pb Collisions at √ sNN=2.76 TeV at the LHC,”Phys. Rev. C., Vol. 89, 2014, p.024911.

8

“J/Ψ production and nuclear effects in p-Pb collisionsat √ sNN = 5.02 TeV,” JHEP, Vol.1402, 2014, p. 073.

“Multiplicity Dependence of Pion, Kaon, Proton andLambda Production in p-Pb Collisions at √ sNN =5.02TeV,” Phys. Lett. B., Vol. 728, 2014, p.25,arXiv:1307.6796 [nucl-ex].

“Multi-strange baryon production at mid-rapidity inPb-Pb collisions at √ sNN = 2.76 TeV,” Phys. Lett. B,Vol.728, 216 (2014) arXiv:1307.5543 [nucl-ex].

“K0 S and ∧ production in Pb-Pb collisions at √ sNN =2.76 TeV,” Phys. Rev. Lett., Vol.111, 2013, p. 222301,arXiv:1307.5530 [nucl-ex].

“Long-range angular correlations of pi, K and p in p–Pb collisions at √ sNN = 5.02TeV,” Phys. Lett.. B.,Vol.726, 2013, p.164, arXiv:1307.3237[nucl “ ex].

“Multiplicity dependence of two-particle azimuthalcorrelations in pp collisions at the LHC,” JHEP,Vol.1309, 2013, p.049, arXiv:1307.1249 [nucl-ex].

Abelev, B.B., et al. [ALICE Collaboration]“Energy Dependence of the Transverse MomentumDistributions of Charged Particles in pp CollisionsMeasured by ALICE,” Eur. Phys. J. C., Vol. 73, 2013, p.2662, arXiv:1307.1093 [nucl-ex].

“Directed flow of charged particles at midrapidityrelative to the spectator plane in Pb-Pb collisions at√ sNN = 2.76 TeV,” Phys. Rev. Lett.., Vol. 111, 2013, p.232302, arXiv:1306.4145 2 [nucl-ex].

“D meson elliptic flow in non- central Pb-Pb collisionsat √ sNN = 2.76TeV,” Phys. Rev. Lett., Vol. 111, 2013,p.102301, arXiv:1305.2707 [nucl-ex].

“Centrality dependence of π, K, p production in Pb-Pbcollisions at √ sNN = 2.76 TeV,” Phys. Rev. C., Vol. 88,2013, p.044910, arXiv:1303.0737 [hep-ex].

Abraham, G.J., Bhambroo, R., Kain, V., Dey, G.K. andRaja, V.S.“Intergranular Corrosion Susceptibility of Alloy 600after Autogenous Tungsten Inert Gas and Laser BeamWelding using Electro Technique”, High TemperatureMaterials and Processes, 33, 2014, pp.137-146.

Abraham, G.J., Bhambroo, R., Kain, V., Dey, G.K. andRaja, V.S.,“Comparing Reactivation Behavior of TIG and LaserBeam Welded Alloy 690”, Journal of MaterialsEngineering and Performance, 22, 2013, pp. 427-432.

Abraham, G.J., Kain, V., Dey, G.K. and Raja, V.S.“Stability of Oxide Film Formed at DifferentTemperatures on Alloy 600 in Lithiated Environment”,Journal of Nuclear Materials, 437(1-3), 2013, pp. 188-195.

Adamczyk, L., et al. [STAR Collaboration]“Beam energy dependent two-pion interferometry andthe freeze-out eccentricity of pions in heavy ioncollisions at STAR,” arXiv:1403.4972 [nucl-ex]

“Dielectron Azimuthal Anisotropy at mid-rapidity inAu+Au collisions at √ sNN = 200 GeV,” arXiv:1402.1791[nucl-ex]

“Beam energy dependence of moments of the net-charge multiplicity distributions in Au+Au collisionsat RHIC,” arXiv:1402.1558 [nucl-ex]

“Beam-Energy Dependence of Directed Flow ofProtons, Antiprotons and Pions in Au+Au Collisions,”Phys. Rev. Lett., Vol. 112, 2014, p.162301, arXiv:1401.3043[nucl-ex].

“J/Ψ production at low p T in Au+Au and Cu+Cucollisions at √ sNN= 200 GeV at STAR,” arXiv:1310.3563[nucl-ex]

“Dielectron Mass Spectra from Au+Au Collisions at√ sNN = 200 GeV,” arXiv:1312.7397 [hep-ex].

“Suppression of Upsilon Production in d+Au andAu+Au Collisions at “ sNN = 200GeV,” arXiv: 1312.3675[nucl “ ex].

“J/Ψ polarization in p+p collisions at √ s = 200 GeV inSTAR,” arXiv:1311.1621 [nucl-ex].

“Energy Dependence of Moments of Net-protonMultiplicity Distributions at RHIC,” Phys. Rev. Lett.,Vol.112, 2014, p.032302.

“Neutral pion cross section and spin asymmetries atintermediate pseudorapidity in polarized protoncollisions at √ s= 200 GeV,” Phys. Rev. D., Vol.89, 2014,p.012001.

“Measurement of Charge Multiplicity AsymmetryCorrelations in High Energy Nucleus-NucleusCollisions at 200 GeV,” Phys. Rev. C., Vol.89, 2014, 044908,arXiv:1303.0901 [nucl- ex].

Adarsh S and Reddy Janga, M.“Probabilistic multi-objective optimal design ofcomposite channels using particle swarm optimization,”Journal of Hydraulic R arch, IAHR, Vol.51, No.4,pp.459-464.

Adekola O., Stamp J. D., Majozi T., Garg A. andBandyopadhyay S.“A Unified Approach for the Optimisation of Energyand Water in Multi-purpose Batch Plants Using aFlexible Scheduling Framework”, Industrial &Engineering R arch, Vol. 52 (25), 2013, pp. 8488-8506.

9

Adekola, O., Stamp, J. D., Majozi, T., Garg, A. andBandyopadhyay, S.“Unified approach for the optimization of energy andwater in multipurpose batch plants using a flexiblescheduling framework”, Industrial and EngineeringR arch, Vol. 52, May 2013, pp. 8488-8506.

Adhikari, J.“Thermodynamic modelling of miscibility in(InAs)x(GaAs) 1-x solid solutions”, Phase Transitions,86 (5), 2013, pp. 516-530.

“A review on property estimation methods andcomputational schemes for rational solvent design: Afocus on pharmaceuticals,” Industrial and EngineeringR arch, 52 (21), 2013, pp. 6869-6893.

Adhikary, S., and Chakrabarti, S.“Spectral broadening due to post-growth annealing ofa long-wave InGaAs/GaAs quantum dot infraredphotodetector with a quaternary barrier layer,” ThinSolid Films, Vol.552, 2014, pp.146-149.

Aditya Ramesh, S. Sudarshan, Purva Joshi, ManishaNaik Gaonkar“Keyword search on form results”, VLDB J. Vol. 22(1),pp. 99-123, 2013

Adlarson, P., et al. [WASA-at-COSY Collaboration]“Measurement of the pn→ppπ0π− Reaction inSearch for the Recently Observed ResonanceStructure in dπ0π0 and dπ+π− systems,” arXiv:1306.5130[nucl-ex].

“Investigation of the dd → 3H en π0 reaction with theFZ Jlich WASA-at-COSY facility,” Phys. Rev. C., Vol.88,No. 1, 2013, p. 014004, arXiv:1304.3561 [nucl-ex].

“Search for a dark photon in the π0 →! e+e− γ decay,”Phys. Lett. B., Vol.726, 2013, p.187, arXiv:1304.0671[hep-ex].

Adsul Bharat, Sohoni Milind, and Subrahmanyam K.V.“Quantum deformations of irreducible repr ntations ofGL(mn) toward the Kronecker problem”, Contemporary,Volume 602, pp. 39-71, 2013.

Agarwal Vishesh, Gada Vinesh, H. and Sharma Atul“Parallel Computation of 3D Transient Two-Phase Flowusing Level-Set Method,” Numerical Heat Transfer-BFundamentals, Vol.(63), No. 4, 2013, pp.327-356.

Agarwal, A., Krishna, S. And Chakrabarti, S.“Investigation of thermal interdiffusion in InAs/In0.15Ga0.85As/GaAs Quantum Dot-in-a-Wellheterostructures,” Journal of Luminescence, Volume143, 2013, pp. 96-100.

Agarwal, M., Modi, P., Dusane, R.O.“Study of Electrical, Optical and Structural Propertiesof Al-Doped Zno Thin Films on PEN Substrates”.

Journal of Nano- and Electronic Physic., 5, 02027,2013.

Agarwala, H., Scherer, T. M., Mobin, S. M., Kaim, W.and Lahiri, G. K.“Bidirectional non-innocence of the β-diketonatoligand 9-oxidophenalenone (L-) in [Ru([9]aneS3)(L)(dmso)]n, [9]aneS3 = 1,4,7-trithiacyclononane”,Dalton Trans., Vol.43, 2014, pp.3939-3948.

Agarwalla Sanjib Kumar, Suprabh Prakash andSankar Uma S.“Resolving the octant of theta23 with T2K and NovA,”JHEP, Vol. 1307, 2013, p.131, IFIC-12-85, DOI: 10.1007/JHEP07(2013)131.

Aggarwal, S.G., Kawamura, K., Umarji, G.S.,Tachibana, E., Patil R.S. and Gupta, P.K.“Organic and Inorganic Markers and Stable C-, N-isotopic Compositions of Tropical Coastal Aerosolsfrom Megacity Mumbai: Sources of Organic Aerosolsand Atmospheric Processing”, Atmospheric Chem.Phys., Vol. 13, 2013, pp. 4667-4680.

Agnihotri, S. and Mukherji, S.“Size-controlled silver nanoparticles synthesized overthe range 5-100 nm using the same protocol and theirantibacterial efficacy,” RSC Advances, Vol. 4, 2014, pp.3974-3983.

Agnihotri, S., Mukherji, S. and Mukherji, S.“Immobilized Silver Nanoparticles Enhance ContactKilling and Show Highest Efficacy: Elucidation of theMechanism of Bactericidal Action of Silver,”Nanoscale, Vol. 5(16), 2013, pp. 7328–7340.

“Size-controlled silver nanoparticles synthesized overthe range 5-100 nm using the same protocol and theirantibacterial efficacy”, RSC Advances, Vol. 4, 2014,pp. 3974-3983.

Aguiar Marcelo and Mahajan Swapneel“On the Hadamard product of Hopf monoids,” Canad.J. Math., Vol.66, No. 3, 2014, pp. 481-504.

Aher, P. D., Adinarayana, J. and Gorantiwar, S. D.“Quantification of Morphometric Characterization andPrioritization of Sub-Watersheds for ManagementPlanning in Semi-Arid Tropics of India: A RemoteSensing and GIS Approach”, Journal of Hydrology(Elsevier), 511, 2014, pp. 850-860.

“Prioritization of Watersheds Using Multi-CriteriaEvaluation through Fuzzy Analytical HierarchyProcess”, CIGR Agricultural EngineeringInternational, 15(1), pp. 11-18.

Ahmad, M., Umrao, R.K., Ansari, M.K., Singh, R. andSingh, T.N.“Assessment of Rockfall Hazard along the Road CutSlopes of State Highway-72, Maharashtra, India,”

10

Geomaterials, Vol. 3(1), 2013, pp. 15-23. DOI10.4236/gm.2013.31002

Ahmad, M., Ansari, M.K. and Singh, T.N.“Instability investigations of basaltic soil slopes alongSH-72, Maharashtra, India,” Geomatics, NaturalHazards and Risk, 2013, online: DOI:10.1080/19475705.2013.826740

Ahmedabadi, P.M., Kain, V., Dangi, B.K. andSamajdar, I.“Role of Grain Boundary Nature and Residual Strain inControlling Sensitisation of Type 304 Stainless Steel”,Corr. Sci., 66, 2013, pp. 242-255.

Ahmedabadi, P.M., Kain, V., Muralidhar, K.V. andSamajdar, I.“On the Role of Residual Strain in ControllingSensitisation of Twin-Boundary Engineered Type 304Stainless Steel”, J. Nucl. Mater., 432, 2013, pp. 243-251.

Ajesh Babu, Limaye Nutan, RadhakrishnanJaikumar, and Varma Girish“Streaming algorithms for language recognitionproblems”. Theor. Comput. Sci. Vol. 494, pp.13-23, 2013.

Akella P. S., Sarvanan S., Joshi S.S. and Solanki C.S.“Pre-metallization processes for c-Si solar cells”, SolarEnergy, Vol. 97, 2013, pp. 388-397.

Akhuly, A. and Gupta, M.“A competency based approach to recruitmentdecisions using Brunswik`s Lens Model,” AsianJournal of Management, Vol 5 (1), 2014.

Akram, M., Saxena, P. and Kumar Sudarshan“Laminar Burning velocity of methane-air mixtures atelevated temperatures,” Energy and Fuels, Vol. 27(6),2013, pp. 3460-3466.

Akshay, S., Benedikt Bollig, Paul Gastin“Event clock message passing automata: A logicalcharacterization and an emptiness checking algorithm”,Formal Methods in System Design, Vol. 42(3), pp. 262-300, 2013.

Alam, A. S., Pittner, A., Rethmeier, M. and De, A.“Modeling of gas metal arc welding process using ananalytically determined volumetric heat source,” ISIJInternational, Vol.53 4:, 2013, pp.698-703.

Alameddine, I., Karmakar, S. Qian, S.S. Paerl, H.W.and Reckhow, K.H.“Optimizing an estuarine water quality monitoringprogram through an entropy-based hierarchical spatio-temporal Bayesian framework,” Water Resources Rarch, Publisher American Geophysical Union (AGU),Vol. 49 (10), pp. 6933-6945.

Alawieh Aya, Ortega Romeo, Pillai Harish, AstolAlessandro, and Berthelot Eric“Voltage Regulation of a Boost Converter inDiscontinuous Conduction Mode,” IEEE ControlSystems Magazine, Vol. 33, issue 3, 2013, pp. 55-65.

Ali, O.A., Tayalia, P., Shvartsman, D., Mooney, D.J.“Inflammatory cytokines pr nted from polymer matricesdifferentially generate and activate Dendritic Cells insitu”, Adv. Func. Mater, doi: 10.1002/adfm.201203859,2013.

Anand, R., Bitra, A. and Biswas, A. “Structural Basis of Substrate Specificity of CDASuperfamily Guanine Deaminase” Bio, Vol. 52(45), 2013,pp.8106–8114.

Anandavardhanan, U.K. and Prasad, D.“A local global question in automorphic forms,”Compos. Math., Vol. 149, 2013, pp. 959-995.

Ananthnag, G. S., Edukondalu,N., Mague, J. T. andBalakrishna, M. S.“Copper and palladiumm complexes of 2-(diphenylphosphino)-N,N-dimethylbenzylamine andits selenide derivative, Polyhedron,” 2013, 62, 201-207.

Andrei Afanasev, Carl E. Carlson and MukherjeeAsmita“Off-axis excitation of hydrogenlike atoms by twistedphotons,” Phys. Rev. A, Vol. 88, 2013, p. 033841, e-Print:arXiv:1305.3650 [quant-ph]

Ansari, A., Kaushik, A. and Rajaraman, G.“Mechanistic Insights On the Ortho-hydroxylation ofAromatic Compounds by Nonheme Iron Complex: AComputational Case Study on the ComparativeOxidative Ability of Ferric-hydroperoxo and High-valent FeIV=O and FeV=O Intermediates” J. Am. Chem.Soc., Vol.135, 2013, p. 4235.

Ansari, M. K., Ahmad M. and Singh, T.N.“Rockfall risk assessment for pilgrims along thecircumambulatory pathway, Saptashrungi Gad Temple,Vani, Nashik Maharashtra, India,” Geomatics, NaturalHazards and Risk, online: DOI:10.1080/19475705.2013.787657

“Rockfall Risk Assessment along Mumbai-PuneExpressway, Maharashtra, India,” InternationalJournal of Science and R arch, Vol. 3(5), 2014, pp.424-426.

“Rockfall Hazard Analysis of Ellora Cave, Aurangabad,Maharashtra, India,” International Journal of Scienceand Research, Vol. 3(5), 2014, pp.427-431.

11

Ansari, M. K., Ahmad M., Singh, R. and Singh, T.N.“Rockfall Hazard Rating System for IndianRockmass,” International Journal of Earth Sciencesand Engineering, Vol. 06 (01), 2013, pp. 18-27.

“Rockfall hazard assessment at Ajanta Cave,Aurangabad, Maharashtra, India,” Arabian Journal ofGeosciences, Vol. 7(5) 2014, pp. 1773-1780.

Anvesha A and Shojaei Baghini, M.“A Versatile high-swing Gm-C filter with Process andTemperature Invariant Bandwidth and Gain for Neuro-potential Signal Conditioning and Recording”, Journalof Low-Power Electronics, American ScientificPublishers, August 2013.

Anvesha A, Dave, M.V., Shojaei Baghini, M., andSharma, D.K.“800nA Process and Voltage Invariant, 106dB PSRRPTAT Current Reference”, IEEE Transactions onCircuits and Systems II, September 2013.

Anvesha, A., and Shojaei Baghini, M.“A Versatile High Swing Current Mode InstrumentationAmplifier with an Integrated Band-pass Filter for Bio-potential Signal Acquisition”, Journal of Low-PowerElectronics, American Scientific Publishers, December2013.

Aonkar, A. K. and Kulkarni, S.S.“Model order reduction for dynamic simulation ofbeams with forcing and geometric nonlinearities,”Finite Elements in Analysis and Design, 2013, pp.50-62.

Arapostathis, A., Borkar, V.S. and Suresh Kumar, K.“Convergence of the relative value iteration for theergodic control problem of nondegenerate diffusionsunder near monotone cost,” SIAM J. Control Optim.Vol. 52, No.1, 2014, pp. 1-31.

Arora, A., Mandal, A., Chakrabarti, S., and Ghosh,S.“Magneto-optical Kerr effect spectroscopy basedstudy of Lande g-factor for holes in GaAs/AlGaAssingle quantum wells under low magnetic fields,”Journal of Applied Physics, Vol.113, 2013,pp.213505.

Arunkumar R., and Jothiprakash, V.“Chaotic Evolutionary Algorithms for Multi-R rvoirOptimization,” Water Resources Management, Vol.27, No. 15, 2013, pp. 5207-5222.

“Reservoir evaporation prediction using data-driventechniques,” Journal of Hydrologic Engineering,ASCE, Vol. 18. No. 1, 2013, pp. 40-49.

Aryanpour, K., Roberts, A., Sandhu, A., Rathore,R., Shukla, A. and Mazumdar, S.“Subgap Two-Photon States in Polycyclic AromaticHydrocarbons: Evidence for Strong ElectronCorrelations,” J. Phys. Chem. C, Vol.118, 2014, p.3331.

Aryanpour, K., Shukla, A. and Mazumdar, S.“Electron Correlations and Two-Photon States inPolycyclic Aromatic Hydrocarbon Molecules: APeculiar Role of Geometry”, J. Chem. Phys. Vol.140,2014, p.104301.

Asha, B. S. and Mandal J. N.“Laboratory performance tests on natural prefabricatedvertical drains in marine clay,” Ground Improvement,DOI: http://dx.doi.org/10.1680/grim.13.00001, 2013, pp.1-21.

Ashfaq, M., Ghosh, S., Kao, S.C., Bowling, L.C., Mote,P., Touma,D., Rauscher, S.A. and Diffenbaugh, N.S.Near-term acceleration of hydroclimatic change inthe western U.S., J. Geophys. Res. Atmos., Vol.118,10, 2013, pp.676–10,693, doi:10.1002/jgrd.50816.

Ashutosh K. A., Banerjee Subhashish, Kumar Dineshand Sankar Uma S.“Constraining quark mixing matrix in isosinglet vector-like down quark model from a fit to flavor-physics data,”arXiv:1402.1023.

Aslam, M. et al.“Mesoscale morphology of airborne core–shellnanoparticle clusters: X-ray laser coherent diffractionimaging,” Journal of B: Atomic, Molecular andOptical , Vol.46, 2013, p. 164033.

Asthana, J., Kapoor, S., Mohan, R. and Panda, D.“Inhibition of HDAC6 deacetylase activity increasesits binding with microtubules and suppressesmicrotubule dynamic instability in MCF-7 cells”, JBiol Chem., Vol. 288, 2013, pp. 22516-22526.

Athavale Ameer and Patil Pramod“On certain multivariable subnormal weighted shiftsand their duals,” Canadian Mathematical Bulletin,Vol. 56, 2013, pp. 459-465.

Ayyagari, N., Mehta, A., Gopi, E., Deb, I., Mobin S. M.and Namboothiri, I. N. N.“Conjugate Addition of Curcumins to Chalconesand Azodicarboxylates” Tetrahedron 2013, Vol.69,pp.5973-5980.

Ba, S., Jain, N., Joseph, V.R. and Singh, R.“Integrating Analytical Models with Finite ElementModels: An Application in Micromachining,” Journalof Quality Technology, Vol.(45), No. 2, 2013, pp.200-212.

12

Baburaj, P., Shyam Kamal and Bandyopadhyay, B.‘‘Higher order sliding mode based robust stabilizationof fluid-flow model of TCP/AQM scheme”,International Journal of Automation and Control,Vol. 8, No. 1, 2014, pp. 17-31.

Baburaja, P.K., Bisht, G.S., Gupta, S.K., and Prabhu,S.V.“Measurement of subcooled boiling pressure dropand local heat transfer coefficient in horizontal tubeunder LPLF conditions,” Nuclear Engineering andDesign, Vol.(255), 2013, pp.169-179.

Bade M. H. and Bandyopadhyay S.“Thermal Integration of Heat Transfer Fluid Systems”,Asia-Pacific Journal of Engineering, Vol. 9, 2014, pp.1-15.

Bagchi S, Bhattacharyya Surajit and Narayanan, K.“Does Anti-dumping Enforcement Generate Threat?”Foreign Trade Review, Vol. 49. No.1, December 2013.

Bajaj, R., Sharma, M. and Bahadur, D.“Visible Light Driven Novel Nanocomposite (BiVO4/CuCr2O4), for Efficient Degradation of Organic Dye”,Dalton Transactions, 42, 2013, pp. 6736–6744.

Bajpai Saumya, Nataraj Neela and Pani Amiya K.“On fully discrete finite element schemes forequations of motion of Kelvin-Voigt fluids,” Int. J.Numer. Anal. Model., Vol. 10 (2), 2013, pp. 481-507.

Bajpai Saumya, Nataraj Neela, Pani Amiya K.,Damazio Pedro and Yuan Jin Yun“Semidiscrete Galerkin method for equations ofmotion arising in Kelvin-Voigt model of viscoelasticfluid flow,” Numer. Methods Partial DifferentialEquations, Vol.29, No. 3, 2013, pp. 857–883.

Bajpai, V and Singh, R.“Finite Element Modeling of OrthogonalMicromachining of Anisotropic Pyrolytic Carbon viaDamaged Plasticity,” Precision Engineering, Vol.(38),2014, pp.300-310.

Balachandran Niranjan and Bhattacharya Srimanta“On an Extremal Hypergraph Problem Related toCombinatorial Batch Codes,” Discrete Applied , Vol.12,2014, pp. 373–380.

Balakrishnan, B., Joshi, N., Banerjee, R.“Borate aided Schiff’s base formation yields insitugelling hydrogels for cartilage regeneration”. Jof Materials Chemistry B, Vol. 1, 2013, pp. 5564-5577.

Balasubramanian, S. and Ecke, R.E.“Experimental study of Rayleigh-Benard Convectionin the pr nce of rotation,” International Journal of

Materials, Mechanics & Manufacturing, Vol.(1), No.2, 2013, pp.148-152.

Balasubramanian, S., Orlicz, G.C. and Prestridge, K.P.“Experimental study of initial condition dependenceon turbulent mixing in shock-accelerated Richtmyer-Meshkov fluid layers,” Journal of Turbulence,Vol.(14)3, 2013, pp.170-196.

Balasundar, I., Raghu, T. and Kashyap, B.P.“Hot Working and Geometric Dynamic RecrystallisationBehaviour of A Near-‘ Titanium Alloy with AcicularMicrostructure”, Materials Science and EngineeringA, 600, 2014, pp. 135-144.

Balkrishnan, M.S., Ibrahim, S.K. andGaneamoothry, C.“Palladium(II) complex of phosphinic amide,[Pd(Ph2P(O)CH2NPh)2] and its catalytic investigationtowards Suzuki-Miyaura cross-coupling reactions,”Ind. J. Chem. 2013, Vol. 52A, pp.1400-1403.

Balkrishnan, M. S., Naik S. and Mague J. T.“N1,N1,N4,N4-Tetrakis(dibenzylphosphino)benzene-1,4-diamine: synthesis, structural studies andtransition metal ,” Inorg. Chim. Acta , Vol. 407, 2013,pp. 139-144.

Bandivadekar T.P. and Jangid, R.S.,“Optimization of multiple tuned mass dampers forvibration control of system under external excitation”,Journal of Vibration and Control, Vol. 19, 2013, pp.1854-1871.

Bandyopadhyay S.“The answer is not blowin’ in the wind, or is it?”(Editorial), Clean Technologies and EnvironmentalPolicy, Vol. 16(2), 2014.

Bandyopadhyaya, R.“Plasma treated activated carbon impregnated withsilver nanoparticles for improved antibacterial effectin water disinfection”, Carbon, 57, 2013, pp. 1-10.

Banerjee Biplab, Varma Surender, BuddhirajuKrishna Mohan and Eeti Laxmi Narayana“Unsupervised Multi-Spectral Satellite ImageSegmentation Combining Modiûed Mean-Shift and aNew Minimum Spanning Tree Based ClusteringTechnique”, IEEE Journal of Special Topics onApplied Remote Sensing (JSTARS), Vol. 7, No. 3, 2014,pp. 888-894.

Banerjee R.“Mainstreaming of Renewables Where do we go fromhere?” Akshay Urja, Volume 6, Issue 5&6, bi-monthlynewsletter, Ministry of New and Renewable Energy,Government of India, New Delhi, June 2013.

13

\“Synergising Industry - Academia Linkages in India:An Academic Perspective,” News, Bulletin of theIndian Association, Vol. 43 No. 2, April, 2013.

“R&D and emerging technologies; ‘next practices’ forenergy efficiency in India”, Energy ManagerMagazine,Vol. 6 Issue July 3 – September, 2013.

“Nanotechnology: a versatile aid in our fight againstAIDS Editorial”, Nanomedicine, Vol.8 (5), 2013, pp.675-677.

“Overcoming the stratum corneum barrier: A nanoapproach”, Editorial.DrugDeliv.Transl.Res. Vol. 3,2013, pp. 205-208.

Banerjee, A., Thamphiwatana, S., Caromona, E.S.,Rickman, B., Doran, K.S., Obonyo, M.“Myeloid differentiation primary response gene 88(MyD88) deficiency leads to an early and rapiddevelopment of Helicobacter-induced gastricmalignancy”, Infection and Immunity, Vol. 82, 2014,pp. 356-363.

Banerjee, S.“Microbial mat-related peculiar tunnels and cracksfrom modern supratidal environment, Gulf of Cambay,India,” International Journal of Earth Sciences,Vol.102, June 2013, p.2223.

Banerjee, S., Mandal, D., and Shubhani, S. K.,“Wavelet Based Active Sensing for Health Monitoringof Plate Structures Using Baseline Free Guided WaveSignals”, International Journal of Smart Sensing andIntelligent Systems, 6 (4), 2013, pp. 1435-1455.

Baraik Abhijit, Singh Harpartap and Parmananda, P.“Experimental evidence of enhancement in theanticipation time by cascading,” Phys. Lett. A, Vol. 378,2014, p.1356.

Bardhan, R.“Simulation of Land Use Consequences of UrbanCorridor in Kolkata: An Integrated Spatial and ExpertSystem Model,” Environment and Urbanization Asia,Vol.4(2), 2013, pp. 267-286.

Barick, K. C., Aslam, M. and Bahadur, D.“Fabrication and properties of Co doped ZnO sphericalassemblies,” J. Alloys Comp., Vol.587, 2014, pp.282-286.

Barick, K.C., Aslam, M., and Bahadur, D.“Fabrication and Properties of Co Doped ZnOSpherical Assemblies”, Journal of Alloys andCompounds, 587, 2014, pp. 282-286.

Barick, K.C., Singh, S., Bahadur, D., Lawande,M.A., Patkar, D.P. and Hassan, P.A.“Carboxyl Decorated Fe304 Nanoparticles for MRIDiagnosis and Localized Hyperthermia”, Journal ofColloid and Interface Science, 418, 2014, pp. 120-125.

Barros, W. P., Inglis, R., Nichol, G. S., Rajeshkumar,T., Rajaraman, G., Piligkos, S., Stumpf, H. O. andBrechin, E. K.“From antiferromagnetic to ferromagnetic exchange ina family of oximebased MnIII dimers: A magneto-structural study” Dalton Trans., 2013, Vol.42, pp.16510-16517.

Basu, N., Ghosh, K., Kabi, S., Sengupta, S. andChakrabarti, S.“A detailed investigation on the impact of variation ingrowth rate, monolayer coverage and barrier thicknesson the optical characteristics of InAs/GaAs bilayerquantum Dot heterostructures,” Superlattices andMicrostructures, Vol.57, May 2013, pp.150–157.

Basu, R., Jain, L., Maji, B.C., Krishnan, M., andSamajdar, I.“Microstructural Developments through Marformingin A Ni-Ti-Fe Shape Memory Alloy”, Metallurgicaland Materials Transactions A: Physical Metallurgyand Materials Science, 44(9), 2013, pp.4310-4322.

Bayadi, R. and Banavar, R.N.“Almost global attitude stabilization of a rigid body forboth internal and external actuation schemes”,European Journal of Control, Elsevier, Vol. 20,2014, pp.45-54.

Bayadi, R., Banavar, R.N. and Chang, D.E.“Characterizing the reachable sets of a spacecraft withtwo rotors”, Systems and Control Letters, Elsevier,Vol.62, 453-460, 2013.

Beelen, R., Raaschou-Nielsen, O., Stafoggia, M.,Andersen, Z.J., Weinmayr, G., Hoffmann, B., Wolf, K.,Samoli, E., Fischer, P., Nieuwenhuijsen, M.,Vineis, P., Xun, W.W., Katsouyanni, K.,Dimakopoulou, K., Oudin, A., Forsberg, B., Modig,L., Havulinna, A.S., Lanki, T., Turunen, A., Oftedal,B., Nystad, W., Nafstad, P., De Faire U, Pedersen,N.L., Ostenson, C.G., Fratiglioni, L., Penell, J.,Korek, M., Pershagen, G., Eriksen, K.T., Overvad,K., Ellermann, T., Eeftens, M., Peeters, P.H.,Meliefste, K., Wang, M., Bueno-de-Mesquita, B.,Sugiri, D., Krämer, U., Heinrich, J., de Hoogh K,Key, T., Peters, A., Hampel, R., Concin, H., Nagel,G., Ineichen, A., Schaffner, E., Probst-Hensch, N.,Künzli, N., Schindler, C., Schikowski, T., Adam, M.,Phuleria, H.C., Vilier, A., Clavel-Chapelon, F.,Declercq, C., Grioni, S., Krogh, V., Tsai, M.Y.,Ricceri, F., Sacerdote, C., Galassi, C., Migliore,E., Ranzi, A., Cesaroni, G., Badaloni, C.,

14

Forastiere, F., Tamayo, I., Amiano, P., Dorronsoro,M., Katsoulis, M., Trichopoulou, A., Brunekreef,B., and Hoek G.“Effects of long-term exposure to air pollution onnatural-cause mortality: an analysis of 22 Europeancohorts within the multicentre ESCAPE project,”Lancet, 2013, doi: 10.1016/S0140-6736(13)62158-3

Behera, H and Mukhopadhyay, G“Tailoring the structural and electronic properties of agraphene-like ZnS monolayer using biaxial strain,”Journal of D: Applied , Vol.47, No.7, 2014, p.075302.

“Fermivelocity Modulation in Graphene by StrainEngineering,” arXiv:1302.1843 [cond-mat.mes-hall],2013.

“The Effect of Biaxial Strain on the Structural andElectronic Properties of ZnS Monolayer: Full-PotentialDFT Calculations,” arXiv:1305.6895v1 [cond-mat.mes-hall], 2013.

Behera, M. R., Sundarambal, P., Cui, C. andTkalich, P.“Short-term analysis of hydrodynamic, water qualityand meteorological data in the West Johor Strait ofSingapore”, Marine Pollution Bulletin, vol.77, issue.1-2, 2013, pp. 380-395.

Behera, N. K., Sahoo, R. and Nandi, B.K.“Constituent Quark Scaling of StrangenessEnhancement in Heavy-Ion Collisions,” Adv. HighEnergy Phys. Vol.2013, 2013, p. 273248,arXiv:1206.6616 [hep-ph].

Bellare, J.R.“Enhanced Growth of Endothelial Precursor Cellson PCG-Matrix Facilitates Accelerated, Fibrosis-Free, Wound Healing: A Diabetic Mouse Model”,PLoS ONE, 8 (7), 2013, art. no. e69960.

“Rheology and microstructural studies of regeneratedsilk fibroin solutions,” Rheologica Acta, 52 (10-12),2013, pp. 833-840.

“Chain length dependence of polyol synthesis of zincferrite nanoparticles: Why is diethylene glycol sodifferent?” Dalton Transactions, Vol. 42 (15), 2013,pp. 5430-5438.

“In-Vivo Efficacy of Compliant 3D Nano-Composite inCritical-Size Bone Defect Repair: A Six Month PreclinicalStudy in Rabbit”, PLoS ONE, 8 (10), art. no. E77578,2013.

“Synthesis, optimization, and characterization of silvernanoparticles from Acinetobacter calcoaceticus andtheir enhanced antibacterial activity when combinedwith antibiotics,” International Journal ofNanomedicine, 8, 2013, pp.4277-4290.

“Nanoconfinement of water layers in lamellarstructures prepared in the pr nce and absence oforganicsolvent”, Journal of Physical Chemistry B,117(7), 2013, pp. 2106-2112.

“Improved functionalization of electrospun PLLA/gelatin scaffold by alternate soaking method for bonetissue engineering”, Applied Surface Science, Vol.268, 2013, pp. 477-488.

“Bone healing evaluation of nanofibrous compositescaffolds in rat calvarial defects: A comparative study,”Journal of Biomedical Nanotechnology, Vol. 9 (12),2013, pp. 2073-2085.

“Enhanced strength and biocompatibility ofelectrospun polycaprolactone-gelatin scaffold withsurface deposited nano-hydroxyapatite”, MaterialsScience and Engineering C, Vol. 33(4), 2013, pp.2376-2385.

Bellare, J.R. and Vanage, G.R.“In vivo biocompatibility evaluation of electrospuncomposite scaffolds by subcutaneous implantation inrat,” Drug Delivery and Translational Research, 3(6), 2013, pp. 504-517.

Belotti, P., Kirches, C., Leyffer, S., Linderoth, J.,Luedtke, J. and Mahajan, A.“Mixed-integer nonlinear optimization”, ActaNumerica, Vol. 22, May 2013, pp. 1-131.

Bera, K. and Namboothiri, I. N. N.“Enantioselective Synthesis of α-Nitro-σ-ketosulfones via a Quinine-SquaramideCatalyzedConjugate Addition of α-Nitrosulfones toEnones,”Chem. Commun.2013, Vol.49, pp.10632-10634.

“Enantioselective Synthesis of α-Amino-γ-sulfonylPhosphonates with a Tetrasubstituted Chiral α-Carbonvia Quinine-Squaramide Catalyzed Michael Additionof Nitrophosphonates to Vinyl Sulfones, “Adv. Synth.Catal.2013, Vol.355, pp.1265-1270.

Bera, K., Nadkarniand, D. and Namboothiri, I. N. N.“Asymmetric Synthesis of g-Aminophosphonates: TheBio-isostericAnalogs of g-Aminobutyric Acid”, J.Chem. Sci.2013, Vol.125, pp.443-465 (Review).

Bera, S. and Mukherjee, I.“An Integrated Approach based on PrincipalComponent and Multivariate Process Capability forSimultaneous Optimization of Location and Dispersionfor Correlated Multiple Response Problems”, QualityEngineering, Taylor & Francis, Vol. 25, No. 3,pp.266-281.

15

Berg, N., Hooper,T. N., Liu, J., Beedle, C. C., Singh,S. K., Rajaraman,G., Piligkos, S., Hill, S., Brechin,E. K., and Jones, L. F. “Synthetic, structural, spectroscopic and theoreticalstudy of a Mn(III)–Cu(II) dimer containing a Jahn–Teller compressed Mn ion” Dalton Trans, Vol. 42,2013, p.207.

Bhambroo, R., Roychowdhury, S., Kain, V. andRaja, V.S.“Effect of Reverted Austenite on Properties ofPrecipitation Hardenable 17-4 Stainless Steel”, Mat. Sci.Engg. A, 568, 2013, pp. 127–133.

Bhapkar Udaysinh S., Srivastava Atul and AgrawalAmit“Acoustic and heat transfer aspects of an inclinedimpinging synthetic jet,” International Journal ofThermal Sciences, Vol.(74), 2013, pp.145-155.

Bharadwaj, R. and Mukherji, S.“Gold nanoparticle coated U-bend fiber optic probefor localized surface plasmon resonance baseddetection of explosive vapours”, Sensors andActuators B, Volume 192, 2014, pp. 804-811.

Bhardwaj, R., Zeigler, K., Seo, J.H., Ramesh, K.T. andNguyen T.D.“A Computational Model of Blast Loading onHuman Eye,” Biomechanics and Modeling inMechanobiology, Vol.(13), No. 1, 2013, pp.123-140.

Bhargava, S.“Examining the Effects of Psychological ContractBreach on Organizational Outcomes: Moderatingrole of Tenure and Educational levels,” Vikalpa, Vol.36(1), 2013, pp.13-25.

Bhartiya S. and Venkatesh K. V.“Quantitative Analysis of Dynamic Cell RegulatoryModel of Schizosaccharomyces pombe”, CurrSynthetic Sys Biol 1 (105), 2332- 0737.1000105, 2013,pp. 1652-1655.

Bhaskaran S., Ganesh A., Mahajani S., Aghalayam P.,Sapru R.K. and Mathur D.K.“Comparison between two types of Indian coals forthe feasibility of Underground Coal Gasificationthrough laboratory scale experiments”, Fuel, Vol. 113,2013, pp. 837-843.

Bhattacharya S., Momaya, K. and Iyer, K.C.“Enablers of Growth in Indian ConstructionCompanies: A Comparative Study of Polar Cases”,International Journal of Organizational Analysis,Vol. 21, 2013, No. 23, pp. 428-453.

“Latent Factors among Enablers of Growth: A studyin the Context of Construction Companies in India”,Journal of Advances in Management Research,2013, Vol. 10, Issue 1, pp. 45-57.

Bhattacharya, A. and Balazs, A.C.“Stiffness-Modulated Motion of Soft Microscopicparticles Over Active Adhesive Cilia,” Soft Matter,Vol.(9), No. 15, 2013, pp.3945-3955.

“Size selectivity in artificial cilia-particleinteractions: Mimicking the behavior of suspensionfeeders”, Langmuir, 29 (14), 2013, pp. 4616-4621.

Bhattacharya, A., Jindal, B., Singh, P., Datta, A.,Panda, D.“Plumbagin inhibits cytokinesis in Bacillus subtilis byinhibiting FtsZ assembly— A mechanistic study of itsantibacterial activity”, FEBS J., Vol. 280, 2013, pp.4585-4599.

Bhattacharya, S., Sharma, D.K., Saurabh, S., De,S., Sain, A., Nandi, A. and Chowdhury, A.“Plasticization of Poly(vinylpyrrolidone) Thin Filmsunder Ambient Humidity: Insight from Single-Molecule Tracer Diffusion Dynamics,” J. Phys.Chem. B, Vol.117, 2013, p.7771.

Bhide Manish, Ramamritham Krithi“Category-Based Infidelity Bounded Queries overUnstructured Data Streams”, IEEE Trans. Knowl.Data Eng. Vol.25(11), pp. 2448-2462, 2013.

Bhide, R.R., Singh, S.G., Duryodhan, V.S.,Sridharan, A. and Agrawal, A.“Onset of nucleate boiling and critical heat flux withboiling water in microchannel,” InternationalJournal of Microscale and Nanoscale Thermal andFluid Transport Phenomena, Vol.(4 ), No.1, 2013,pp.25-47.

Bhoi, B., Venkataramani, N., Aiyar, R.P.R.C. andPrasad, S.“FMR and Magnetic Studies on Polycrystalline YIGThin Films Deposited Using Pulsed Laser”, IEEETransactions on Magnetics, 49(3), Art. No. 6466527,2013, pp.990-994.

Bhushan, A., Inamdar, M. and Pawaskar, D.“Simultaneous planar free and forced vibrationsanalysis of an electrostatically actuated beamoscillator,” Int. J. Mech. Sci., Vol. 82, 2014, p.90.

Bhushan, B., Kundu, T. and Singh, B.P.“Nonlinear optical properties of two differentnanoassemblies of polydiacetylen(PDA): PDAnanovescicles and PDA nanocrystal,” Optics andPhotonics Journal, Vol.3, 2013, p. 278.

16

“Synthesis and nonlinear optical response of silvernanoparticle decorated polydiacetylene compositenanovescicles,” Optics communications, Vol.312,2014, p.127.

Bhushan, M.“Optimization-based sigma points selection forconstrained state estimation”, Industrial andEngineering Research, 52 (5), 2013, pp. 1916-1926.

“Audit of sensor networks for efficient faultdiagnosis,” Journal of Process Control, 23 (6), 2013,pp. 881-893.

Bhushan, M. and Wangikar, P.P.“Metabolic modeling for multi-objective optimizationof ethanol production in a Synechocystis mutant,”Photosynthesis Research, 118 (1-2), 2013, pp. 155-165.

Bijudas C R, Mitra, M. and Mujumdar, P, M.“Time reversed Lamb wave for damage detection in astiffened aluminum plate”, Smart Materials andStructures, September 2013, Vol. 22, pp. 105026.

“Coupling effect of piezoelectric wafer transducersin distortions of primary Lamb wave modes”, SmartMaterials and Structures, April 2013, Vol. 22, pp.065007.

Biswas, S. and Agrawal, A.“Noise reduction in large enclosure using single, dualand ensconced Helmholtz resonators,” CurrentScience,Vol.(124), No. 12, 2013, pp.1681-1691.

Biswas, S. and Hablani, H.B.“Lunar Trajectories of Spacecraft for Navigation, withApplication to Chandrayan-2,” Bar-Itzhack MemorialSymposium on Estimation, Navigation and SpacecraftControl, Springer Verlag Edition – 2013.

Biswas, S., Grant, M., Samajdar, I., Haldar, A. andSain, A.“Micromechanics of Emergent Patterns in PlasticFlows”, Scientific Reports: Nature Publishing Group,Scientific Reports 3, Article No.2728 doi: 10.1038/srep02728, 2013, pp. 1-9.

Bitra, A., Hussain, B., Tanwar, A. S. and Anand, R.“Identification of Function and Mechanistic Insightsof Guanine Deaminase from Nitrosomonaseuropaea: Role of the C-Terminal Loop inCatalysis”Bio, Vol. 52 (20), 2013, pp. 3512–22.

Bohra, M., Prasad, S., Venkataramani, N., Sahoo,S.C., Kumar, N., and Krishnan, R.“Low Temperature Magnetization Studies ofNanocrystalline Zn-Ferrite Thin Films”, IEEETransactions on Magnetics, Vol. 49(7),art.no.6559083, 2013, pp.4249-4252.

Bojjireddy, N., Sinha, R.K., Panda, D.,Subrahmanyam, G.“Sanguinarine suppresses IgE induced inflammatoryresponses through inhibition of type II PtdIns 4-kinase(s)”, Arch Biochem Biophys., Vol. 537, 2013,pp. 192-197.

Borkar V.S.“Stochastic approximation”, Resonance 12 (2013),1086-1094. (Popular article)

“Feature search in the grassmanian in onlinereinforcement learning”, IEEE J. Selected Topics inSignal Processing, Vol. 7(5), 2013, pp.746-758.

Botcha Divakar, V., Narayanam Pavan K., SinghGulbagh, Talwar S.S., Srinivasa, R.S. and Major,S.S.“Effect of Substrate and Subphase Conditions on theSurface Morphology of Graphene Oxide Sheetsprepared by Langmuir-blodgett Technique”, Colloidsand Surfaces A: Physico and Engineering Aspects,452(1), 2014, pp.65-72.

Brijesh P., Chowdhury A. and Sreedhara S.“Effect of Ultra-Cooled EGR and Retarded InjectionTiming on Low Temperature Combustion in CIEngines,” SAE, 2013, pp. 2013-01-0321.

“Simultaneous reduction of NOx and soot using ultra-cooled EGR and retarded injection timing in a dieselengine,” International Journal of Green Energy,2014, DOI: 10.1080/15435075.2013.841164.

Brijesh, P. and Sreedhara, S.“Exhaust emissions and its control methods incompression ignition engines: A review,”International Journal of Automotive Technology,Vol.(14), No. 2, 2013, pp.195-206.

Brijesh, P., Harshvardhan, A. and Sreedhara, S.“A study of combustion and emissions characteristicsof a compression ignition engine processes using anumerical tool,” International Journal of Advancesin Engineering Sciences and Applied , Vol.6, 2014,pp.17-30.

Buech, H., Mahapatra, S., Rahman R., Morello, A. andSimmons, M.Y.“Spin readout and addressability of phosphorus-donorclusters in silicon,” Nature Communications, Vol.4,2013, p.017, Doi: 10.1038/ncomms3017 (2013).

Buffing, M.G.A., Mukherjee, A. and Mulders, P.J.“Generalized Universality of Definite Rank GluonTransverse Momentum Dependent Correlators,” Phys.Rev. D, Vol.88, 2013, p. 054027.

17

Burattini, P, and Agrawal, A.“Wake interaction between two side-by-side cylindersin channel flow,” Computers & Fluids, Vol.(77),2013, pp.134-142.

Byagari, K., Shanavas, A., Rengan, A., Kundu, G.,Srivastava, R.“Biocompatible Amphiphilic Pentablock CopolymericNanostructures for Cancer Drug delivery”, acceptedarticle in Journal of Biomedical Nanotechnology,Vol. 10(1), pp. 109-119, (IF 5.2), 2013.

Chakarabarty, T., Mahajan, A.V., Gippius, A.A.,Tkachev, A.V., Buettgen, N. and Kraetschmer, W.“BaV3O8: A possible Majumdar-Ghosh system withS=1/2,” Phys. Rev. B., Vol. 88, 2013, p.014433.

Chakrabarti Soumen, Ramakrishnan Ganesh,Ramamritham Krithi, Sarawagi Sunita, SudarshanS.“Data-based research at IIT Bombay”. SIGMODRecord, 42(1), pp. 38-43, 2013

Chakrabarti, R., Ananya,D. and Sebastian, K. L.“Diffusion in an elastic medium: A model formacromolecule transport across the nuclear porecomplex”, Physica A: Statistical Mechanics and ItsApplications, 2014, 404, 65.

Chakrabarti, R., Kesselheim, S., Peter, K. S. andChristian, H.“Tracer diffusion inside a crowded cylindricalchannel”, Phys. Rev. E 87, 2013, p.062709.

Chakrabarti, R., Samanta, N. and Ghosh, J.“Looping and reconfiguration dynamics of a flexiblechain with internal friction” AIP Advances, Vol.4,2014, p.067102.

Chakraborty Debarghya and ChoudhuryDeepankar“Stability of non-vertical waterfront retaining wallsupporting inclined backfill under earthquake andtsunami”, Ocean Engineering (ISSN: 0029-8018,Impact Factor: 1.161/2012) Elsevier, U.K., Vol. 78,2014, pp. 1-10.

Chakraborty, H. and Shukla, A.“Pariser-Parr-Pople Model based Investigation ofGround and Low-Lying Excited States of Long Acenes,”J. Phys. Chem. A, Vol. 117, 2013, p.14220.

Chakraborty, Paulomi“Reader, looke Not on his Picture, but his Booke:’Textual Body, ‘Author’-ity and Repr ntation in the FirstFolio of Shakespeare,” The Renaissance and itsAfterlife: Special Issue of Apperceptions,Vol. VI,August 2013, pp. 54-69.

Chandra, S., Heinrich Lang, and Bahadur, D.“Polyaniline-iron Oxide Nanohybrid Film as Multi-Functional Label-Free Electro and BiomagneticSensor for Catechol”, Analytica Chimica Acta, 795,2013, pp. 8-14.

Chandra, S., Nigam, S., and Bahadur, D.“Combining Unique Properties of Dendrimersand Magnetic Nanoparticles Towards CancerTheranostics”, Journal of Biomedical Nano-technology, 10, 2014, pp. 32-49.

Chandrasekar M.S. and Mitra S.“Electrodeposition of Iron Phosphide on CopperSubstrate as Conversion Negative Electrode forLithium-ion”, Ionics, Vol. 20 (1), 2014, pp. 137-140.

Chandrasekhar, S.B., Sudhakara Sarma, S.,Ramakrishna, M., Suresh Babu, P., Rao, T.N. andKashyap, B.P.“Microstructure and Properties of Hot ExtrudedCu-1wt% Al2O3 Nano-composites Synthesized byvarious Techniques”, Materials Science andEngineering A., 591, 2014, pp. 46-53.

Chandrayan A. and Bandyopadhyay S.“Cost Optimal Segregated Targeting for ResourceAllocation Networks”, Clean Technologies andEnvironmental Policy, Vol. 16(3), 2014, pp. 455-465.

Chatterjee Kaustav and Choudhury Deepankar“Variations in shear wave velocity and soil site classin Kolkata city using regression and sensitivityanalysis”, Natural Hazards, (ISSN: 0921-030X,Impact Factor: 1.639/2012) Springer, Netherlands,Vol. 69, No. 3, 2013, pp. 2057-2082.

Chatterjee, D., Hokayem, P., Ramponi, F. andLygeros, J.“On mean-square boundedness of stochastic linearsystems with quantized observations”, IEEETransactions on Automatic Control, Vol. 58, No. 8,August 2013, pp. 2082-2085.

Chattopadhyay, A. and Dutta, S.“Higher plant biomarker signatures of Early Eocenesediments of North Eastern India,” Marine andPetroleum Geology, Vol. 57, 2014,pp.51-67.

Chaturvedi N. and Bandyopadhyay S.“Indirect Thermal Integration for Batch Processes”,Applied Thermal Engineering, Vol. 62, 2014, pp.229–238.

“Targeting for Multiple Resources in BatchProcesses”, Engineering Science, Vol. 104, 2013,pp. 1081–1089.

“Optimization of multiple fresh water resources inflexible schedule batch water network”, Industrial &

18

Engineering Research, Vol. 53(14), 2014, pp. 5996–6005.

Chelamallu Hari Prasad, Venkataraman, G. andMurti, M.V.R.“Accuracy assessment of MODIS/Terra snow coverproduct for parts of Indian Himalayas”, GeocartoInternational ,DOI:10.1080/10106049.2013.819041.

Chelikani, V., Ranjan, T., Zade, A., Shukla, A.,Kondabagil, K.“Genome segregation and packaging machinery inAcanthamoebapolyphaga mimivirus is reminiscent ofbacterial apparatus”, J Virol., doi:10.1128/JVI.03199-13, 2014.

Chinta, J. P., Dessingou, J. and Rao, C. P.“Synthesis, characterization and ion recognitionstudies of lower rim 1,3-di{rhodamine} conjugate ofcalix[4]arene”, J. Chem. Sci., Vol.125, 2013, pp.1455-1461.

Choudari, S., Adil, G.K. and Ananthakumar, U.“Configuration of Manufacturing Strategy DecisionAreas in Line Production System: Five Case Studies”,International Journal of Advanced ManufacturingTechnology, Vol. 64, 2013, pp. 459-474.

Choudhury D. and Sarkar S.K.“The ALD-MLD Growth of a ZnO-ZinconeHeterostructure”, Vapor Deposition, Vol. 20, 2014,20, pp. 1–8.

Choudhury Deepankar and Katdare Amey Deepak“New approach to determine seismic passiveresistance on retaining walls considering seismicwaves”, International Journal of Geomechanics,ASCE, (ISSN: 1532-3641) USA, Vol. 13, No. 6, 2013,pp. 852-860.

Choudhury Deepankar, Katdare Amey Deepak andPain Anindya“New method to compute seismic active earth pressureon retaining wall considering seismic waves”,Geotechnical and Geological Engineering, AnInternational Journal, (ISSN: 0960-3182) Springer,Netherlands, Vol. 32, No. 2, 2014, pp. 391-402.

Chouhan, R. K., Alam Aftab, Ghosh, S. and Mookerjee,A.“Interplay of force constants in the lattice dynamicsof disordered alloys: An ab initio study,” Phys. Rev.B, Vol. 89, 060201(R), 2014.

Chowdhary, A. , Bhattacharya S., Sharma D.K, De, S.,Sain, S. and Nandi, A.Plasticization of poly(vinylpyrrolidone) thin-films underambient humidity: Insight from single-moleculetracer diffusion dynamics”, The Journal of PhysicalChemistry B (2013), Vol.117, pp.7771–7782.

Chowdhury, A. D., Bhaduri, S. and Lahiri, G. K.“Is a naked platinum nanocatalyst better than theanalogous supported catalysts?”, RSC Adv. Vol.3,2014, pp.5341-5344.

Chung-yi Suen, Das Ashish and Midha, C.K.“Optimal fractional factorial designs and theirconstruction,” Journal of Statistical Planning andInference, Vol.143, 2013, pp. 1828–1834.

Ciais, P., Patwardhan, A. and et al.“Attributing the increase in atmospheric CO2 toemitters and absorbers,” Nature Climate Change, 2013,doi:10.1038/nclimate1942.

Cini and Deo, M.C.“Real Time Current Prediction with Recurrent NeuralNetworks and Model Tree,” International Journalof Ocean System Engineering, Vol. 3(3), 2013,pp.116-130,http://dx.doi.org/10.5574/IJOSE.2013.3.3.1M C 16

Cordeiro James, J, Lerong He, Conyon Martin andShaw Tara Shankar“Informativeness of Performance Measures and ChinExecutive Compensation,” Asia Pacific Journal ofManagement, Vol. 30 (4), 2013, pp.1031-1058.

D’Souza, O. J., Mascarenhas, R. J., Thomas, T.,Namboothiri, I. N. N., Rajamathi, M., Martis P.and Dalhalle, J.“Electro Determination of L-Tryptophan Based on aMultiwall Carbon Nanotube/Mg–Al Layered DoubleHydroxide Modified Carbon Paste Electrode as aSensor,” Electroanal. Chem., 2013, Vol.704, pp.220-226.

Dahiya, D., Baskar, S., and Coulouvrat, F.“Characteristic fast marching method formonotonically propagating fronts in a movingmedium,” SIAM J. Scientific Computing, Vol. 35, No.4, 2013, pp. A1880-A1902.

Dalai S., Vijayalakshmi S., Shrivastava P., Sivam S.P.and Sharma P.“Effect of Co loading on the hydrogen storagecharacteristics of hollow glass microspheres (HGMs)”,International Journal of Hydrogen Energy, Vol. 39,2014, pp. 3304-3312.

Dalai Sridhar, Vijayalakshmi, S. and SharmaPratibha“Preparation of Hollow Glass Microspheres (HGMs)from amber coloured and borosilicate glass frits,”Advanced Materials Research, Vol.678, 2013,pp.37-41.

Dalai Sridhar, Vijayalakshmi, S., Sivam SantoshParam and Sharma Pratibha“Magnesium and Iron loaded hollow glassmicrospheres (HGMs) for hydrogen storage”

19

International Journal of Hydrogen Energy, DOIinformation: 10.1016/j.ijhydene.2014.03.062

“Preparation and Characterization of Zinc LoadedHollow Glass Microspheres (HGMs) from AmberColoured Glass Frits,” Advanced Materials Research,864-867, 2014, pp 668-672.

Dani S.G. and Nogueira, A.“Continued fractions for complex numbers and valuesof binary quadratic forms,” Trans. Amer. Math. Soc.Vol.366, 2014, pp. 3553 -3583.

Daniel de Florian, Hinderer Patriz, MukherjeeAsmita, Ringer Felix and Werner Vogelsang“Approximate next-to-next-to-leading ordercorrections to hadronic jet production,”Phys.Rev.Lett. Vol.112, 2014, p. 082001, DOI:10.1103/PhysRevLett.112.082001, e-Print:arXiv:1310.7192 [hep-ph]

Daryapurkar, A.S., Kolte, J.T. and Gopalan, P.“Growth of Pseudocubic Perovskite-Type SrRuO3Thin Films On Quartz Substrate Using Pulsed LaserDeposition Method”, Journal of Materials Science:Materials in Electronics, 24 (12), 2013, pp. 4698-4703.

“Growth and Characterization of Na 0.5Bi 0.5TiO 3Thin Films with BaTiO 3 Buffer Layer (Study of Au/Na 0.5Bi 0.5TiO 3/BaTiO 3/Pt Capacitor)”,Ferroelectrics, 447 (1), 2013, pp. 46-55.

Daryapurkar, A.S., Kolte, J.T., Apte, P.R. andGopalan, P.“Structural and Electrical Properties of Sodium BismuthTitanate (Na 0.5Bi0.5TiO3) Thin Films Optimized usingthe Taguchi Approach”, Ceramics International, 40 (1PART B), 2014, pp. 2441-2450.

Das S. S. and Senthil Kumar, M.“Enhancement of anomalous Hall effect in Fe/Simultilayers,” J. Phys. D: Appl. Phys. Vol.46, 2013,p. 375003.

Das, A., Kapoor, A., Mehta, G.D., Ghosh, S.K., Sen,S.“Extracellular matrix density regulates extracellularproteolysis via modulation of cellular contractility”,J.CarcinogeneMutagene, S13:003, doi: 10.4172/2157-2518.S13-003, 2013.

Das, A., Kundu, T., Mobin, S. M., Priego, J. L., J-Aparicio, R. and Lahiri, G. K.“Influence of ancillary ligands on the electronicstructure and anion sensing features of ligand bridgeddiruthenium complexes”, Dalton Trans. Vol.42, 2013,pp.13733-13746.

Das, B.B., Singh, D.N. and Pandey, S.P.“Influence of Initial Curing Humidity on CompressiveStrength and Ultrasonic Properties of Concrete”,

Indian Concrete Journal, Vol.88 (2), February 2014,pp. 48-56.

Das, D. and Dutta, P.“A system dynamics framework for integrated reversesupply chain with three way recovery and productexchange policy”, Computers and IndustrialEngineering, Vol. 66, No.4, 2013, pp. 720-733.

Das, D., Agarwala, H., Chowdhury, A. D., Patra,T., Mobin, S. M., Sarkar, B., Kaim, W. and Lahiri,G. K. “Four-Center Oxidation State Combinationsand Near-Infrared Absorption in[Ru(pap)(Q)2]

n, Q =3 , 5 - D i - t e r t - b u t y l - N - a r y l - 1 , 2 -benzoquinonemonoimine and pap = 2-Phenylazopyridine”, Chem. Eur. J., Vol.19, 2013,pp.7384-7394.

Das, I. and Mukhopadhyay, S.“On generalized multinomial models and joint percentileestimation,” Journal of Statistical Planning andInference, Vol.145, 2014, pp. 190-203.

Das, I., Aggarwal, M. and Mukhopadhyay, S.“Robust Designs in Generalized Linear Models: AQuantile Dispersion Graphs Approach,” Special Issue,Simulation and Computation in Statistical Inferencein Communications in Statistics - Simulation andComputation, 2014.

Dasaka, S.M., Jain Aniruddh and Kolekar Y. A.“Effect of uncertainties in the field load testing onthe observed load-settlement response”, IndianGeotechnical journal, DoI: 10.1007/s40098-013-0083-

Datta, S. N., Rivero, P., Moreira, I. de. P. R., Ricardo,G. C., Datta, S. N. and Illas, F.“General model for explicitly hole-dopedsuperconductor parent compounds: electronicstructure of Ca2-xNaxCuO2Cl2 as a case study.”PhysicalReview B-Condensed Matter andMaterials , 2013, Vol.88(8), 085108/1-085108/8.

de Hoogh K, Wang M, Adam M, Badaloni C,Beelen R, Birk M, Cesaroni G, Cirach M,Declercq C, Dedele A, Dons E, de Nazelle A,Eeftens M, Eriksen K, Eriksson C, Fischer P,Grazuleviciene R, Gryparis A, Hoffmann B,Jerrett M, Katsouyanni K, Iakovides M, Lanki T,Lindley S, Madsen C, Molter A, Mosler G, NadorG, Nieuwenhuijsen M, Pershagen G, Peters A,Phuleria HC, Probst-Hensch NM, Raaschou-Nielsen O, Quass U, Ranzi A, Stephanou E, SugiriD, Schwarze P, Tsai MY, Yli-Tuomi T, Varro MJ,Vienneau D., Weinmayr G., Brunekreef B. andHoek G. C.“Development of Land Use Regression Models forParticle Composition in Twenty Study Areas inEurope”, Environmental Science & Technology,Vol.47(11), 2013, pp.5778-5786.

20

De, A. and Deb Roy, T.“Recent advances in the quantitative understanding offricion stir welding,” Paton Welding Journal,Vol.(10), No. 11, 2013, pp.44-48.

Deb, A., Agasti, S., Saboo, T. and Maiti, D.“Generation of Arylated Quinones by Iron CatalyzedOxidative Arylation of Phenols: Formal Synthesisof Phellodonin, Sarcodonin e, Leucomelone andBetulinan A.” Adv. Synth. Catal., Vol.356, 2014, p705.

Deb, A., Manna, S., Modak, A., Patra, T., Maity, S.and Maiti, D.“Oxidative Trifluoromethylation of UnactivatedOlefins: An Efficient and Practical Synthesis of ±-Trifluoromethyl Ketones.” Angew. Chem. Int. Ed.,Vol.52, 2013, p. 9747.

Deore, N. and Chatterjee, A.“Multigrid technique applied linear time-dependenthyperbolic equations”, Transactions of NanjingUniversity of Aeronautics & Astronautics, Vol. 30,No. 3, September 2013.

Depgetar Pratik, Jain Ashwini, Mishra Sudhanshuand Nanthagopalan Prakash“Influence of steam curing cycle on compressivestrength of concrete,” International Journal ofconstruction materials and structures, Vol. 1, No.2, 2013, pp.18-28.

Desai Sarika S. and Choudhury Deepankar“Spatial variation of probabilistic seismic hazard forMumbai and surrounding region”, Natural Hazards,(ISSN: 0921-030X, Impact Factor: 1.639/2012)Springer, Netherlands, Vol. 71, No. 3, 2014, pp. 1873-1898.

Desai, P. and Kant, T.“On numerical analysis of composite and laminatedcylinders of finite length subjected to partiallydistributed load,” International Journal of PressureVessels and Piping, 111-112, 2013, pp. 321-330.

Deshmukh S.N. and Chandiramani, N.K.“LQR Control of Wind Excited Benchmark BuildingUsing Variable Stiffness Tuned Mass Damper,” Shockand Vibration, Vol. 2014, Article ID 156523, 12pages, 2014. doi:10.1155/2014/156523

Deshpande P.C., Kalbar, P. P., Tilwankar, A.K. andAsolekar, S.R.C.“A novel approach to estimating resourceconsumption rates and emission factors for shiprecycling yards in Alang, India,” Journal of CleanerProduction, Elsevier Publication, IF: 3.398/2012,Vol. 59, 2013, pp.251-259.

Deval Animesh and Dikshit A.K.C.“Construction, Working and Standardization ofMicrobial Fuel Cell”, APCBEE Procedia, Vol.5, pp.59-63.

Dey T., Dey A., Ghosh P.C., Bose M.,Mukhopadhyay A.K. and Basu R.N.“Influence of microstructure on nano- properties ofsingle planar solid oxide fuel cell in pre-and post-reduced conditions”, Materials & Design, Vol. 53,2014, pp. 182-191.

Dey T., Singdeo D., Bose M., Basu R.N. and GhoshP.C.“Study of contact resistance at the electrode–interconnect interfaces in planar type Solid Oxide FuelCells”, Journal of Power Sources, Vol. 233, 2013,pp. 290-298.

Dey Tusharkanti, Khuntia Panchanana, MahajanAvinash V., Anupam and Hossain Zakir“75As NMR local probe study of magnetism in (Eu1-xKx)Fe2As2,” Eur. Phys. J. B., Vol. 86, 2013, p.458.

Dey, M., Guionneau, P., Hinge, V. K. and Rao, C. P.“Structural comparisons of the binding cores formedby 1,3-di-amide derivatives of p-tert-butylcalix[4]arene: Arms stabilization through intra-molecular interactions including N-H…O, O-H…Cland π…Cl types”, Proc. Natl. Acad. Sci., India, Sect.A Phys. Sci., Vol.84, 2014, pp. 297-303. (Specialissue on 100 years of crystallography)

Dey, Tusharkanti, Mahajan, A.V., Kumar, R.,Koteswararao, B., Chou, F. C., Omrani, A. A.and Ronnow, H. M.“Possible spin-orbit driven spin liquid ground state inthe double perovskite phase of Ba3YIr2O9,” Phys.Rev. B., Vol. 88, 2013, p.134425.

Dhanya, S., Bahadur, D., Kundu, G.C. andSrivastava, R.“Maleic Acid Incorporated Poly-(N-iso propylacrylamide) Polymer Nanogels for Dual-responsive Deliveryof Doxorubicin Hydrochloride”, European PolymerJournal, 49, 2013, pp. 22–32.

Dhoke, S.S., Rajgopalan, N., and Khanna, A.S.“Effect of Nanoalumina on the Electro andProperties of Waterborne Polyurethane CompositeCoatings”, Journal of Nanoparticles, Volume, ID527432, 2013, pp. 11.

Diamante J. A. R., Tan R. R., Foo D. C. Y., Ng D. K. S.,Aviso K. B. and Bandyopadhyay S.“Unified Pinch Approach for Targeting of CarbonCapture and Storage (CCS) Systems with MultipleTime Periods and Regions”, Journal of CleanerProduction, Vol. 71, 2014, pp. 67-74.

“A Graphical Approach to Pinch-Based Source-SinkMatching and Sensitivity Analysis in Carbon Captureand Storage System”, Industrial & EngineeringResearch, Vol. 52 (22), 2013, pp. 7211-7222.

21

Divya, P.V., Viswanadham, B.V.S., and Gourc, J.P.“Evaluation of tensile strength-strain characteristicsof fiber reinforced soil through laboratory tests,”Journal of Materials in Civil Engineering, ASCE,Vol.26 (1), 2014, pp.14-23.

Diwan Ajit A., Kenkre Sreyash and VishwanathanSundar“Circumference, chromatic number and onlinecoloring”, Combinatorica, Vol 33 (3), pp. 319-334,2013.

Doiphode, R.L., Narayana Murty, S.V.S., Prabhu,N., and Kashyap, B.P.“Effect of Caliber Rolling on Microstructure andRoom Temperature Tensile Properties of Mg-3Al-1ZnAlloy”, J. Magnesium and Alloys, 1, 2013, pp. 169-175.

Dongre, G., Cyrus, V., Singh, R., and Joshi, S.S“Parametric study of silicon ingot slicing by wire-EDM process,” Proceedings of Institution ofMechanical Engineers, Part B: Journal ofEngineering Manufacture, Vol.(227), No. 11, 2013,pp.1664-1678.

Doran, K.S., Banerjee, A., Disson, O., Lecuit, M.“Concepts and Mechanisms: Crossing Host Barriers”,Cold Spring Harbor Perspective in Medicine, Vol. 3,pii: a010090, 2013.

Du, Yan-Jun; Ning-Jun, J., Liu, S., Jin, F., Singh,D.N. and Puppala, A.“Engineering Properties and MicrostructuralCharacteristics of Cement Stabilized Zinc-Contaminated Kaolin”, Canadian GeotechnicalJournal, Vol. 51, 2014, pp. 289–302. dx.doi.org/10.1139/cgj-2013-0177.

Ducret-Stich RE, Tsai MY, Ragettli MS, IneichenA, Künzli N, and Phuleria HC. C“Role of highway traffic on spatial and temporaldistributions of air pollutants in a Swiss Alpine valley”,Science of the Total Environment, Vol.456, 2013, pp.50-60.

Ducret-Stich RE, Tsai MY, Thimmaiah D, KünzliN, Hopke PK, and Phuleria HC. C“PM10 source apportionment in a Swiss Alpine valleyimpacted by highway traffic”, Environmental Science& Pollution Research, Vol.20(9), 2013, pp.6496-6508.

Duryodhan, V.S., Singh, S.G. and Agrawal, A.“Liquid flow in a diverging microchannel,”Microfluidics and Nanofludics, Vol.(14), No. 1,2013, pp.53-67.

“Boiling flow through diverging microchannel,”Sadhana, Vol.(38), 2013, pp.1067-1082.

Dutta Rani, Singh Bhanu P. and Kundu Tapenendu“Plasmonic Coupling Effect on Spectral Response ofSilver Nanoparticles Immobilized on an Optical FiberSensor,” J. Phys. Chem. C., Vol. 117, 2013, pp.17167"17176.

Dutta, S. and Mandal, J. N.“Behavior of Bamboo Geocells under CompressionLoading Condition,” International Journal of CivilEngineering (IJCE), Vol.2(3), 2013, pp.123-128.

Dutta, S., Bhattacharya, S. and Raju, S.V.“Biomarker signatures from Neoproterozoic-EarlyCambrian oil, western India,” Organic Geo, Vol.56, 2013,pp. 68-80.

Dutta, S., Hartkopf-Froder, C., Witte, K., Brocke,R. and Mann, U.“Molecular characterization of fossil palynomorphsby transmission micro-FTIR spectroscopy:Implications for hydrocarbon source evaluation,”International Journal of Coal Geology, Vol. 115,2013, pp.13-23.

Dutta, S., Saxena, R. and Singh, H.“Exceptional pr rvation of angiosperm markers inMiocene and Eocene ambers,” Geology 42, 155-159.

Dwivedi Siddharth and Ramadevi, P.“Partial resolution of complex cones over Fano B,”Adv.High Energy Phys., 2013, p. 295842.

Edla R., Gangal A.C., Manna J., Vashistha M. andSharma P.“Kinetics and the thermal decomposition of SodiumAlanate in the presence of MmNi4.5Al0.5nanoparticles”, Materials Research Express, Vol. 1,2014, p. 015501.

Emele, C.D., Oren, N., Zeng, C., Wright, S., Velaga,N.R., Nelson, J., Norman, T.J. and Farrington, J.“Agent-driven variable pricing in flexible ruraltransport services,” Communications in Computerand Information Science, Vol.365, 2013, pp. 24-35.

Endait, M and Juneja, A.“New correlations between uniaxial compressivestrength and point load strength of Basalt”,International Journal of Geotechnical Engineering,IGE650, 2014, doi:10.1179/1939787914Y.0000000073.

Eriksson, P.G., Banerjee, S., Catuneanu, O.,Corcoran, P.L., Eriksson, K.A., Hiatt, E.E.,Laflamme, M., Lenhardt, N., Long, G.F.D., Miall,A.D., Mints, M.V., Pufahl, P.K., Sarkar, S., Simpson,E.L.and Williams, G.E.“Secular changes in sedimentation systems andsequence stratigraphy,” Gondwana Research, Vol. 24,October 2013, pp. 468-489.

22

Feng Shun Chai, Das Ashish and Chand Midha“Construction of magic rectangles of odd order,”Australasian Journal of Combinatorics, Vol.55,2013,pp. 131–144.

Fernandes, R. and Mulay, S.“A Highly DiastereoselectiveOxa-Pictet-Spenglerapproach to (+)-Astropaquinone B and (+)-Astropaquinone C and the Formation ofAstropaquinone B Dimer.,” Tetrahedron: Asymmetry,2013, Vol.24, p.1281.

Fernandes, R. and Chowdhury, A. K.“A Synthesis of (R)-(“)-and (S)-(+)-Lavandulol,(+)-Lavandulyl-2-methylbutanoate and (+)-LavandulylSenecioate through Orthoester Johnson-Claisen Rearrangement” Eur. J. Org. Chem. 2013,p.5165.

Fernandes, R. and Halle, M.“Total Synthesis of Both SpiroketalDiastereomers ofthe Reported Structure of CephalosporolideH.,” AsianJ. Org. Chem. 2013, Vol.2, p.593.

Fernandes, R., Gholap S. P. and Mulay V. andSandip V.“A Facile ChemoselectiveDeprotection of Aryl SilylEthers using Sodium Hydride/DMF and in situProtection of Phenol with Various Groups.,”RSCAdv,2014, Vol.4, p.16438.

Fernandes, R., Mulay, S. and ChavanV.“A concise total synthesis of arizonins B1 and C1.”Tetrahedron: Asymmetry 2013, Vol.24, p.1548.

Fernandes, R., Patil, P. H. and Chowdhury, A.K.“A Late Stage β-Epimerization: A Stereodivergent toStereoconvergent Relay to the First Total Synthesisof (+)-Murolic Acid,” Eur. J. Org. Chem. 2013,p.237.

“Ring-Closing Metathesis Enabled EfficientSynthesis of γ-Butenolide Antifungal Agent (-)-Incrustoporin and its Analogues,”Asian. J. Org.Chem.,2014, Vol.3, p.58.”

Fernandes, R., Pullaiah Kattanguru and Bethi, V.“Stereoselective inversion of γ-vinyl-γ-butyrolactoneunder palladium catalysis: Application to thesynthesis of (+)-exo- and (+)-endo-brevicomins.Rodney,”RSCAdv., 2014, Vol.4, p.14507.

Gada Vinesh, H., Datta, D. and Sharma Atul“Analytical and Numerical Study for Two-PhaseStratified-Flow in a Channel subjected to differentThermal Boundary Conditions,” InternationalJournal of Thermal Sciences, Vol.(71), 2013, pp.88-102.

Gandhi Prasanna, Deshmukh Suhas, RamtekkarRahul, Bhole Kiran and Baraki Alem“On-Axis Linear Focussed Spot ScanningMicrostereolithography System: OptomechatronicDesign, Analysis, and Development,” Journal of

Advanced Manufacturing Systems, Vol. 2, No.1, pp43-68, 2013.

Gandhi, M., Agrawal, N. and Bhatia, H.“Quantum Cutting down Conversion by CooperativeEnergy Transfer from Tb3+ to Yb3+ in CeF3Nanophosphors”, Advanced Materials Research,Vol.860, pp.124-127.

Gangolu, S., Rao, A.G, Prabhu, N., Deshmukh, V.P.and Kashyap, B.P.Effect of Strain Rate and Temperature in Flow Behaviourof Aluminium-Boron Carbide Composites”, J. Comp.Mater., 48, 2014, 1313-1321.

“Microstructure Evolution and Flow Behavior of Hot-Rolled Aluminum - 5% B4C Composite”, Materialsand Design, 53, 2014, pp. 581-587.

Ganguli P., and Reddy Janga, M.“Evaluation of Trends and Multivariate FrequencyAnalysis of Droughts in Three Meteorological Sub-divisions of Western India,” International Journal ofClimatology, Vol.34(3), 2014, pp. 911-928.

Ganguli, S., Kulkarni M. and Gupta, M.“The Engineering Undergraduate Experience: AQualitative Perspective,” Psychological Studies, Vol.58 (3), July-September 2013, pp. 248-258.

Garg, V. and Jothiprakash, V.“Evaluation of R rvoir Sedimentation Using DataDriven Techniques,” Applied Soft Computing, Vol.13, No. 8, 2013, pp.3567–3581.

Gargate Gouri and Jain, K.“A framework to comprehend the position ofintellectual property rights in complex organizationalcapital”, International Journal of IntellectualProperty Management, Vol.6, No.3, 2013, pp.201-216.

Gass, I. A., Tewary, S., Nafady, A., Chilton, N.F.,Gartshore,C. J., Asadi, M., Lupton, D.W.,Moubaraki,B., Bond, A., Boas, J. F., Si-Xuan, Guo,Rajaraman, G. and Murray K. S.“Observation of Ferromagnetic Exchange, SpinCrossover, Reductively Induced Oxidation, and Field-Induced Slow Magnetic Relaxation in MonomericCobalt Nitroxides” Inorg. Chem. 2013, Vol.52,pp.7557-7572.

Geogy J. Abraham, Bhambroo, R., Kain, V., Dey,G.K. and Raja, V.S.“Comparing Reactivation Behavior of TIG and LaserBeam Welded Alloy 690”, Journal of MaterialsEngineering and Performance, 22, 2013, pp. 427-432.

George Siby, K.“Imagining Postscience: Heidegger and DevelopmentCommunication,” Environmental Communication: A

23

Journal of Nature and Culture, Vol 7, Nos. 3, 2013,pp. 1-17. DOI:10.1080/17524032.2013.820206.

Ghadi Hemant, Adhikar Sourav, Agarwal Akshayand Chakrabarti, S.“Tuning in spectral response due to rapid thermalannealing on dot-in-a-well infrared photodetectors,”Superlattices and Microstructures, Vol. 65, January2014.

Ghimire, B.N.S, and Reddy Janga, M.“Optimal R rvoir Operation for HydropowerProduction using Particle Swarm Optimization andSustainable Analysis of Hydropower,” ISH Journalof Hydraulic Engineering, Vol. 19, No.3, 2013,pp.196-210.

Ghorpade S.R. and Kaipa, K.V.“Automorphism groups of Grassmann codes,” FiniteFields and Their Applications, Vol. 23, 2013, pp. 80-102.

Ghosh P.C.“Influences of contact pressure on the performancesof polymer electrolyte fuel cells”, Journal of Energy,Vol. 2013, 2013, p. 571389.

Ghosh, D., Mondal, M., Mohite, G.M., Singh, P.K.,Ranjan, P., Anoop, A., Ghosh, S., Jha, N.N., Kumar,A., Maji, S.K.“The Parkinson’s disease-associated H50Q mutationaccelerates α-Synuclein aggregation in vitro”, Bio, Vol.52 (40), 2013, pp. 6925-6927.

Ghosh, S., Singh, K. S., Tewary, S. and Rajaraman, S.“Enhancing the double exchange interaction in a mixedvalence {VIII–VII} pair: a theoretical perspective”Dalton Trans., 2013, Vol.42, pp.16490-16493.

Ghyar, R., Subburaj, K., Ravi, B. and Agarwal, M.“Adaptive Probabilistic Approach for SelectingTumour Knee Prosthesis Components,” ComputerScience & Information Systems, Vol.(10), No. 3,2013, pp.1407-1428.

Glass, K., Ito, S., Wilby, P.R., Sota, T., Nakamura,A. Bowers, C.R., Miller, K.E., Dutta, S., Summons,R., Briggs, D.E.G., Wakamatsu, K. and Simon, J.“Impact of diagenesis and maturation on the survivalof eumelanin in the fossil record,” Organic Geo, Vol.64, 2013, pp. 29-37.

Godbole Rohini M., Misra Anuradha, MukherjeeAsmita and Rawoot Vaibhav S.“Transverse Single Spin Asymmetry in e+p↑→e+J/Ψ+X and Transverse Momentum DependentEvolution of the Sivers Function,” Phys.Rev. D,Vol. 88, No.1, 2013, p.014029, DOI: 10.1103/PhysRevD.88.014029, e-Print: arXiv:1304.2584 [hep-ph]

Goecke, Sven-F, Arshad, A. S., Ebert-Spiegel, M.and De, A.“Probing current, voltage and metal transfercharacteristics in pulsed arc and in conventional anda novel low energy input short arc GMAW,QuarterlyJournal of Japan Welding Society, Vol.(31), No. 4, 2013,pp.26-30.

Gokhale O. S., Puranik B. P. and Ghosh A. K.“Analytical study on degraded core quenching,”Kerntechnik, Vol.(78), No. 3, 2013, pp.167-180.

Gopi, E. and Namboothiri, I. N. N.“Synthesis of Fused Bromofurans via Mg-MediatedDibromocyclopropanation of Cycloalkanone-DerivedChalcones and Cloke-Wilson Rearrangement”, J. Org.Chem.2013, Vol.78, pp.910-919 (Commentary byV. Snieckus and K. G. Guimaraes, Synfacts 2013, Vol.9, p.489).

Gore, K. R., Harikrishna, S. and Pradeepkumar, P. I.Influence of 2’ -Fluoro versus 2’-O-Methyl Substituenton the Sugar Puckering of 4’-C-Aminomethyluridine.J. Org. Chem., Vol 78, October 2013, pp 9956-9962

Goswami Deepjyoti, Pani Amiya K. and YadavSangita“Optimal error estimates of two mixed finite elementmethods for parabolic integro-differential equationswith nonsmooth initial data,” J. Sci. Comput., Vol. 56,No.1, 2013, pp. 131–164.

Gowtham,H.L., Pothnis, J.R., Ravikumar, G. andNaik, N.K.“High strain rate in-plane shear behavior ofcomposites,” Polymer Testing, Vol. 32, 2013, pp.1334-1341.

Grover, R., Wankhade, R.G., Shantaram, Thanewala,K., Khanna, A.S. and Nick Birbills“Development of Hydrophobic Non-fluorine Sol-gelCoatings on Aluminum using Long Chain Alkyl SilanePrecursor”, Journal of Mater. Sci. & Engineering, A(4), 2013, pp. 224-31.

Gudi Thirupathi, Gupta Hari Shanker andNataraj Neela“Analysis of an interior penalty method for fourthorder problems on polygonal domains,” J. Sci.Comput. Vol.54(1), 2013, pp. 177-199.

Gumaste Ashwin and Akhtar S.“Evolution of Packet-Optical Integration in Backboneand Metropolitan High-Speed Networks: A StandardsPerspective” in IEEE Communications Magazine,Vol. 51, No 11, pp. 105-111, 2013.

Gumaste, D. S. and Singh, D. N.“Laboratory Studies to Investigate the Influence ofThermal Energy on Soil-fabric”, Geomechanics and

24

Geoengineering: An International Journal,Vol.8(3), 2013, pp. 209-214,http://dx.doi.org/10.1080/17486025.2012.727038.

Gumaste, S.D., Iyer, K.R., Sharma, S.,Channabasavaraj, W. and Singh, D.N.“Simulation of Fabric in Sedimented Clays”, AppliedClay Sciences, 2014, 91-92, pp.117-126.

Gupta A., Vashistha M. and Sharma P.“Single junction a-Si:H solar cell with a-Si:H/nc-Si:H/a-Si:H quantum wells”, Thin Solid Films, Vol. 550,2014, pp. 643–648.

Gupta Hari Shanker, Kiran Kumar, A.S., ChakrabartiSubhananda, Paul Sandip, Parmar,R.M., Shamudraiah,D.R.M., Shojaei Baghini, M. and Sharma, D.K.“Design of Large dynamic range, low power, Highprecision ROIC for Quantum Dot Infrared Photo-detector,” Electronics Letters (accepted).

Gupta Nupur and Nataraj Neela“A posteriori error estimates for an optimal controlproblem of laser surface hardening of steel,” Adv.Comput. Math., Vol. 39(1), 2013, pp. 69-99.

Gupta Sachin B. and Suresh K.G.“Observation of giant magnetocaloric effect inHoCoSi,” Mat. Lett., Vol. 113, 2013, p. 195.

“Giant low field magnetocaloric effect in softferromagnetic ErRuSi,” Appl. Phys. Lett. Vol.102,2013, p. 022408.

Gupta Sachin, Suresh, K. G. and Nigam, A.K.“Magnetic, magnetocaloric and magnetotransportproperties in RSn1+xGe1-x compounds (R=G, Tb, Er;x=0.1),” J. Magn. Magn. Mater. Vol.342, 2013, p. 61.

Gupta, A. and Garg, A.“Removal of ciprofloxacin by sewage sludge basedactivated carbon,” International Journal of AppliedEngineering Research, Vol. 16, December 2013, pp.1879-1884.

Gupta, G., Birbilis, N. and Khanna, A.S.“An Epoxy Based Lignosulphonate DopedPolyaniline-Poly(Acrylamide Co-Acrylic Acid)Coating for Corrosion Protection of Aluminium Alloy2024-T3”, Int. J. Electrochem. Sci., 8, 2013, pp.3132–31.

Gupta, H. S., Kumar, A.S.K., Chakrabarti, S., Paul,S., Parmar, R.M., Shamudraiah, D.R.M., ShojaeiBaghini, M. and Sharma, D.K.“Design of Large Dynamic Range, Low Power, Highprecision ROIC for Quantum Dot Infrared Photo-detector”, Electronics Letters, August 2013.

Gupta, T., Thayalan, R. and Rajaraman, G.“Magnetic exchange in {GdIII–radical} complexes:method assessment, mechanism of coupling andmagneto-structural correlations” Phys. Chem. Chem.

Phys., 2014, Advance Article, DOI: 10.1039/C4CP00214H

Gupte, S.S., Singh, R. and Singh, T.N.“In-pit Waste Dump Stability Analysis using twoDimensional Numerical Models,” Mining Engineers’Journal, Vol. 14(7), 2013, pp. 16-20

Gupte, S.S., Singh, R., Vishal, V. and Singh, T.N.“Detail investigation of stability of in-pit dump slopeand its capacity optimization,” International Journalof Earth Sciences and Engineering, Vol. 6(2), 2013,pp. 146-159.

Guruganesh, R., Bandyopadhyay, B. and Arya, H.‘‘Robust stabilization of micro aerial vehicles withuncertain actuator nonlinearities”, InternationalJournal of Micro Air Vehicles, Vol. 6, No. 1, 2014,pp. 43-62.

Harindranath, A., Kundu Rajen and MukherjeeAsmita“On transverse spin sum rules,” Phys.Lett. B., Vol.728,2014, pp. 63-67, DOI: 10.1016/ j.physletb. 2013.11.042.

Harindranath, A., Kundu Rajen, Mukherjee Asmitaand Ratabole Raghunath“Comment on Phys. Rev. Lett. 109, 152005 (2012),”Phys. Rev. Lett., Vol.111, 2013, p.039102.

Haripriya, G. S., Neelkant, N.T. and KathuriaVinish“Role of environmental quality and FDI inflows toIndia,” (with Neelkant N T and Vinish Kathuria), Reviewof Market integration, Sage Publishers

Haripriya, G.S. and Singh, P.“Life cycle energy analysis (LCEA) of cooking fuelsources used in India households”, Energy andEnvironmental Engineering, Vol.2(1), 2013, p.20-30. DOI: 10.13189/eee.2014.020103.

Havelia S., Wang S., Balasubramaniam K.R., SchultzA.M., Rohrer G.S. and Salvador P.A.“Combinatorial substrate epitaxy: A new approach togrowth of complex metastable compounds”, CrystalEngineering Communications, Vol. 15(27), 2013, pp.5434-5441.

Hazarika, A., Layek, A., De, S., Nag, A., Debnath,S., Mahadevan, P., Chowdhury, A. and Sarma, D.D.“Ultranarrow and widely tunable Mn2+-inducedphotoluminescence from single Mn-dopednanocrystals of ZnS-CdS alloys”, Physical ReviewLetters (2013), Vol.110, p.267401-05.

Hazra, S., Bhattacharya, S., Singh, M. K., Carrella,L., Rentschler, E., Rajaraman, G. and Mohanta, S.“ Synth s, Structures, Magnetic Properties and DensityFunctional Theoretical Magneto-Structural

25

Correlations of Bis(-Phenoxo) and Bis (-henoxo)--Acetate Dinuclear FeIIINiII Compounds Derived froma Tetraiminodiphenolate Macrocyclic Ligand” Inorg.Chem. 2013, Vol.52 (22), pp.12881-12892.

Hebsur, A. V., Muniappan, N., Rao, E. P. andVenkatachalam, G.“Application of ground penetrating radar for locatingburied impediments to geotechnical exploration andpiling”, International Journal of GeotechnicalEngineering, Vol.7, No.4, 2013, pp.374-387.

Hindasageri Vijaykumar, Vedula R.P., and Prabhu,S.V.“Thermocouple Error Correction for measuring the flametemperature with determination of emissivity and heattransfer coefficient,” Review of Scientific Instruments,Vol.024902, 2013, pp.1-11

“Blowoff Stability of Methane-Air Premixed Flameon Tube Burners,” International Journal ofEmerging Multidisciplinary Fluid Sciences, Vol.(3),No. 4, 2013, pp.209-225.

Honkalaskar V. H., Sohoni M. and Bhandarkar U.V.“Development of an Fuel Efficient Cookstove througha Participatory Bottom-up Approach,” Energy,Sustainability and Society, Vol.(3), 2013, p.16.

Hosseini, H., Moosavi-Nejad, S., Akiyama, H. andMenezes, V.“Shock wave interaction with interfaces betweenmaterials having different acoustic impedances,”Applied Letters, Vol. 104, March 2014, Article ID.103701; 5 pages.

Howlader, R., Walawalkar, M. G. and Murugavel, R.“Mono and dinuclear group 12 phosphonates derivedfrom a sterically encumbered phosphonic acid:Observation of esterification” Inorg. Chim. Acta, Vol.405, 2013, pp.147-154.

Indra, A., Gopinath, C. S., Bhaduri, S. and Lahiri,G. K.“Hydroxyapatite supported palladium catalysts forSuzuki-Miyaura cross-coupling reaction in aqueousmedium”, Catal. Sci. Technol. Vol. 3, 2013, pp.1625-1633.

Ismail-Lattrache, K.B., Ozcan, E., Boukhalfa, B.,Saraswati, P.K., Soussi, M. and Jovane, L.“Early Bartonian orthophragminids (Foraminiferida)from Reineche Limestone, north African platform,Tunisia: taxonomy and paleobiogeographicimplications,” Geodinamica Acta, 2014, DOI: 10.1080/09853111.2013.858950.

Jaccob, M., Ansari, A., Pandey, B. and Rajaraman,G.“Theoretical Studies on Concerted versus Two StepsHydrogen Atom Transfer Reaction by a non-heme

MnIV/III=O complexes: How Important is the OxoLigand Basicity in the C-H Activation Step?”, DaltonTrans., 2013, Vol.42, pp.16518-16526. (Hot article,Cover)

Jackson, L., Rajendran, B., Corrado, G. S.,Breitwisch, M., Burr, G. W., Cheek,R.,Gopalakrishnan, K., Raoux, S., Rettner, C. T., Padilla,A., Schrott, A. G., Shenoy, R. S., Kurdi, B. N., Lam,C. H. and Modha, D. S.“Nano-Scale Electronic Synapses using Phase ChangeDevices,” ACM Journal on Emerging Technologies,9, 2, Article 12, May 2013. ($ Th authors contributedequally to this work).

Jadhav Priyanka, A. and Bajoria Kamal M“Stability Analysis of Piezoelectric FGM plateSubjected to Electro- Loading using Finite ElementMethod”, International Journal of Applied Scienceand Engineering, Vol.11 (4), 2013, pp. 375-391.

“Active Vibration Control of Piezoelectric MetalBased FGM Plate Subjected to Electro- Loading usingFinite Element Method”, International Journal ofMechanics and Solids, Vol.8 (1), 2013, pp. 1-20.

“Free and forced vibration control of piezoelectricFGM plate subjected to electro- loading”, SmartMaterials amd Structures, Vol.22 (6), 2013, 065021.

Jadhav, S.“Isolation of giant unilamellar vesicles fromelectroformed vesicle suspensions and their extrusionthrough nano-pores” Chemistry and Physics ofLipids, 167-168, 2013, pp. 1-8.

Jain V., Bhandarkar U., Joshi S. and Krishnagopal S.“Matching Index Technique for Avoiding HOMResonance in Accelerators: INDUS-2 Accelerator asa Case Study,” Review of Scientific Instruments,Vol.(84), 2013, pp.086101.

Jain, A., Verma, A.K., Vishal, V. and Singh, T.N.“Numerical Simulation of Fault ReactivationPhenomenon,” Arabian Journal of Geosciences, Vol.6(9), 2013, pp. 3293-3302.

Jain, P., Naithani, A.K. and Singh, T.N.“Performance characteristics of tunnel boringmachine in basalt and pyroclastic rocks of Deccantraps – A case study,” Journal of Rock Mechanicsand Geotechnical Engineering, 2013, DOI:10.1016/j.jrmge.2013.11.003

Jain, R., Pachapur, V., Kapoor, A., Vasavada, M.S.,Singh, P., Renu, D., Dikshit, J.B., and Srivastava,S.“An integrative systems analysis of high-grade gliomacell lines: TLRs, Wnt, BRCA1, Netrins, STXBP1 and

26

MDH1 provide putative molecular targets fortherapeutic intervention”. Current Pharmacogenomicsand Personalized Medicine, Vol.11, 2013, pp. 118-136.

Jaiswal, M., Gogoi, M., Sarma, H.D., Banerjee, Rand Bahadur, D.“Biocompatibility, biodistribution, and efficacy ofmagnetic nanohydrogels in inhibiting growth oftumors in experimental micemodels”, Biomater. Sci.,Advance Article DOI: 10.1039/C3BM60225G, 2014.

Jaiswal, M., Pradhan, A., Banerjee, R. andBahadur, D.“Dual pH and temperature stimuliresponsive magneticnanohydrogels for thermochemotherapy”, JNanoscienceNanotechnology, Vol.13, 2013, pp. 1-8.

Jaiswal, M.K., Gogoi, M., Sharma, H.D., Banerjee, R.,and Bahadur, D.“Biocompatibility Biodistribution Biodistribution andEfficacy of Magnetic Nanohydrogels in InhibitingGrowth of Tumors in Experimental Mice Models”,Biomaterials Science, 2, 2014, pp. 370-380.

Janarthan B, Mitra, M. and Mujumdar, P. M.“Lamb wave based damage detection in compositepanel”, Journal of Indian Institute of Science, Vol. 93,October-December 2013, pp. 715-734

Janga Reddy M. and Ganguli, P.“Spatio-temporal Analysis and Derivation of Copula-based Intensity-Area-Frequency Curves forDroughts in Western Rajasthan, India,” StochasticEnvironmental Research and Risk Assessment,Vol. 27(8), 2013, pp.1975-1989.

Janga Reddy M. and Singh Vijay P.“Multivariate Modeling of Droughts UsingCopulas and Meta-heuristic Methods,” StochasticEnvironmental Research and Risk Assessment,Vol.28(3), 2014, pp.475-489.

Jasmine, J. and Mukherji, S.“Sustainable Management of Tank Bottom Sludge fromRefineries: Role of Bioaugmentation with n-alkaneand naphthalene degrading Burkholderia cultures,”International Journal of Sustainable Innovation,Vol. 3(1), Published in March 2014, pp. 9-16.

Jawale, D. V., Gravel, E., Geertsen, V., Li, H.,Shah, N., Namboothiri, I. N. N., and Doris, E.“Aerobic Oxidation of Phenols and RelatedCompoundsusing Carbon Nanotube–Gold NanohybridCatalysts,”ChemCatChem 2014, Vol.6, pp.719-723.

Jayaprakash, K., Desai, Y.M. and Naik, N.K.“Fatigue behavior of [0n/90n]s composite cantileverbeam under tip impulse loading,” CompositeStructures, Vol. 99, 2013, pp. 255–263.

Jena, A.K., and Bhargava, P.“Analysis of Light Harvest in Terms of Current PerMole of Dye in Dye-Sensitized Solar Cells Made withOpaque and Transparent Photoanodes”, RenewableEnergy, 53, 2013, pp.265-270.

Jha, B. and Singh, D.N.“A Three Step Process for Purification of Fly AshZeolites by Hydrothermal Treatment”, Applied ClayScience, Vol. 90, 2014, pp.122-129.

“Synthesis of Higher Grade Fly Ash Zeolite X fromFly Ash by Three Step Fusion”, MaterialsPerformance and Characterization, ASTM,Vol. 2(1), 2013, pp. 285-295, doi:10.1520/MPC20130016

Jha, D.K., Kant, T., Srinivas, K. and Singh, R.K.“An accurate higher order displacement model withshear and normal deformations effects for functionallygraded plates,” Fusion Eng. Des., Vol.96, 2013, pp.799-823.

Jha, N.N., Anoop, A., Ranganathan, S., Mohite, G.M.,Padinhateeri, R., Maji, S.K.“Characterization of amyloid formation by glucagon-like peptides: Role of basic residues in heparin-mediated aggregation”. Bio. Vol. 52(49), 8800-10.doi: 10.1021/bi401398k, 2013.

Jindal, B. and Panda, D.“Understanding FtsZ assembly: Cues from thebehavior of its N- and C-terminal domains”, Bio, Vol.52, 2013, pp. 7071-7081.

Jindal, G. and Sunoj, R. B.‘Axially Chiral Imidodiphosphoric Acid CatalyzedAsymmetric Sulfoxidation Reaction: Insights onAsymmetric Induction’ Angew. Chem. Int. Ed. Vol.53, 2014, p.4432.

‘Transition State Modeling in the Rational Design ofCatalysts for Asymmetric Diamination Reactions’Org. Biomol. Chem., Vol.12, 2014, p.2745.

Jindal, R., Raja, V.S., Styles, M., Gibson, M. andHutchinson, C.R.“Effect of Annealing Below the CrystallizationTemperature on The Corrosion Behavior of Al-Ni-YMetallic Glasses”, Corrosion Science, 84, 2014, pp.54-65.

Jolhe, D.A. and Subash Babu, A.“Modification in Interpretive Structural ModelingMethodology to Enhance its Applicability in GroupDecision Process and Power of Discrimination,”International Journal of Business Excellence,Vol.(7), No. 3, 2014, pp.281-348.

27

Joly, A., Dentith, M., Porwal, A., Spaggiari, C.,Tyler, I. and McCuaig, T.C.“An integrated geological and geophysical study ofthe west Arunta Orogen and its mineral prospectivity,”Geological Survey of Western Australia Records,Vol.113, 2013, p. 89.

Joshi Rajani R. and Sreenath, S.“Quantitative Characterization of Protein TertiaryMotifs,” J. Mol. Mod., Vol. 20(1), 2014, pp. 2077-2085.

Joshi Rajani R., Nawsupe, G. and Wangikar, S.P.“Ayurvedic Nadi Parikshan ki Adhunik VaigyanicWaidhata: Chikitsakiya Ankadon ka Sankhyikiya aurSanganatmak Vishleshana,” Statistical &Computational Analysis of Ayurvedic PulseDiagnostic Data, JIGYASA (special issue), Vol. 27 &28, 2013, pp.16-25.

Joshi, A.“Frequency Domain Input Identification for VibrationTesting of Flexible Structures”, Proceedings of theInstitution of Engineers, Part G Journal ofEngineering, Vol. 227, No. 5, 2013, pp. 838-856, DOI:10.1177/0954410012442784.

Joshi, C.V., Pathan, E.K., Punekar, N.S., Tupe, S.G.,Kapadnis, B.P., Deshpande, M.V.“A bio correlate of dimorphism in a zygomyceteBenjaminiella poitrasii: Characterization of purifiedNAD-dependent glutamate dehydrogenase, a target forantifungal agents”, Antonie van Leeuwenhoek,Vol.104, 2013, pp. 25–36.

Joshi, N., Saha, R., Thanigaivel, S., Balakrishnan, B.,More, P. and Banerjee, R.“Carboxymethylchitosan tethered lipid nanovesicles– hybrid nanoblanket for oral delivery ofpaclitaxel”,Biomacromolecules, Vol. 14, 2013, pp. 2272-2282.

Joshi, N., Thanigaivel, S., Deshmukh, A.andBanerjee, R.“Apoptotic cascade inspired lipidnanovesicles showsynergism with encapsulated paclitaxel inchemoresistant colon cancer”, Nanomedicine,10.2217/NNM.13.182, 2014.

Jothiprakash, V. and Arunkumar, R.“Optimizing Hydropower R rvoir Using EvolutionaryAlgorithms Coupled with Chaos”, Water ResourcesManagement, Vol.27. No. 7, 2013, pp. 1963-1979.

Jothiprakash, V. and Fathima, T.A.“Chaotic Analysis of Daily Rainfall Series in KoynaR rvoir Catchment Area”, Stochastic EnvironmentalR arch and Risk Assessment, Vol. 27. No. 6, 2013,pp. 1371-1381.

“Chaotic analysis of r reservoir inflow series- a casestudy on Koyna r rvoir inflow” Journal of Institutionof Engineers (India), Vol. 94, No. 2, 2013, pp. 89-97.

“Non Linear Dynamic Analysis of Koyna ReservoirEvaporation” International Journal of Ecology andDevelopment, Vol. 24. No. 1, 2013, pp.12-26.

Junming Liu, Jianxi Huang, LiyanTian,Hongyuan Ma, Wei Su, Wenbin W, RamsankaranRAAJ, Xiaodong Zhang and Dehai Zhu“Regional winter wheat yield prediction by integratingMODIS LAI into the WOFOST model with sequentialassimilation technique,” Food, Agriculture andEnvironment (JFAE), Vol. 12, (1), 2014, pp.180-187.

Jürgens V, Ess S, Phuleria HC, Früh M,Schwenkglenks M, Frick H, Cerny T, andVounatsou P. C“Bayesian spatio-temporal modelling of tobacco-related cancer mortality in Switzerland” GeospatialHealth, Vol.7(2), 2013, pp.219-236.

“Tobacco-related cancer mortality: Projections fordifferent geographical regions in Switzerland,” SwissMedical Weekly, 2013, doi: 10.4414/smw.2013.13771.

Kadali Raghuram, B. and Vedagiri, P.“Modelling pedestrian road crossing behaviour undermixed traffic condition,” European Transport \Trasporti Europei, Issue 55, 2013, pp.1-17, ISSN 1825-3997.

Kadali, S., Sharma, S. and Singh, D.N.“Application of Nanoindentation to EstablishInfluence of Heat on Soils,” Engineering Geology,Vol.162, 2013, pp.14-21.

Kadali, S., Susha Lakeshmi, S.U, Sharma, S. andSingh, D.N.“Investigations to Establish the Influence of theThermal Energy Field on Soil Properties”, ACTAGeotechnica Slovenica, Vol. 10(2), 2013, pp. 59-76.

Kainthola, A., Singh, P.K. and Singh, T.N.“Stability investigation of road cut slope in basalticrockmass, Mahabaleshwar, India,” GeoscienceFrontiers, 2014, online: DOI: 10.1016/j.gsf.2014.03.002

Kainthola, A., Verma, D. and Singh, T.N.“Probabilistic and Sensitivity Investigation for the HillSlopes in Uttarakhand, Lesser Himalaya, India,”American Journal of Numerical Analysis, Vol. 1(1),2013, pp. 8-14.

Kaipa Krishna V., and Pillai Harish, K.“Weight spectrum of codes associated with theGrassmannian G(3,7)”, IEEE Transactions onInformation Theory, Vol. 59, No. 1, 2013, pp. 986 –993.

28

Kalaimani, R.K., Belur, M.N., and Chakraborty,D.“Singular LQR control, optimal PD controller andinadmissible initial conditions”, IEEE Transactionson Automatic Control, Volume 58, no. 10, 2013, pp.2603-2608.

Kalaimani, R.K., Belur, M.N. andSivaramakrishnan, S.“Generic pole assignability, structurally constrainedcontrollers and unimodular completion”, LinearAlgebra and its Applications, Volume 439, no. 12,2013, pp. 4002-4022.

Kalbar, P. P., Karmakar, S. and Asolekar, S.R.“Comparative Assessment of Wastewater TreatmentTechnologies: Life Cycle Approach,” Water andEnvironment Journal, Publisher Wiley, Vol. 27, 2013,pp. 261-268.

“The Influence of Expert Opinions on the Selection ofWastewater Treatment Alternatives: A Group Decision-making Approach,” Journal of EnvironmentalManagement, Publisher Elsevier, Vol. 128, 2013, pp.844-851.

Kale, S.S., Raja, V.S. and Bakare, A.K.“Interface Electro Corrosion Behavior of Alclad Al–Zn–Mg–Cu–Cr Al Alloy Adhesively Bonded withCarbon Fibre Plastic Stiffener”, CorrosionEngineering, Science and Technology, 49, 2014,pp.116-123.

“Environmentally Assisted Cracking Behaviour of Al-Zn-Mg-Cu-Cr Alloy Bonded with Polymer MatrixComposite Stiffener”, Corrosion Science, 75, 2013, pp.318-325.

Kali, Ravi and Mukhopadhyay, A.“Spark Plasma Sintered/Synthesized Dense andNanostructured Materials for Solid-State Li-ionBatteries: Overview and Perspective”, J. PowerSources, 247, 2014 pp. 920-931.

Kalita Hemen, Harikrishnan, V., Shinde, D.B.,Pillai, V.K. and Aslam, M.“Hysteresis and charge trapping in graphene quantumdots,” Appl. Phys. Lett. Vol.102, 2013, p.143104.

Kalita, A.Ch. and Murugavel, R.“Fluoride Ion Sensing and Caging by a PreformedMolecular D4R Zinc Phosphate Heterocubane” Inorg.Chem., Vol.53, 2014, pp. 3345-3353.

Kalita, H., Harikrishnan, V. and Aslam, M.“Field effect transport properties of Chemicallytreated graphene quantum dots,” Int. J.Nanotechnology, Vol. 11 (1), 2014, pp.75-84.

Kalita, L. and Murugavel, R.“Organotitanium phosphates with free P-OH groups:Synthesis, spectroscopy and solid state structures” J.Organomet. Chem., Vol.751, 2014, pp.555-562.

Kalita, L., Sharma, K. and Murugavel, R.“Pseudopolymorphism leading and two differentsupramolecular aggregations in a phosphatemonoester: role of a rare water-dimer” Cryst EngComm, Vol. 16, 2014, pp.51-55.

Kambale, K.R., Kulkarni, A.R., and Venkataramani,N.“Grain Growth Kinetics of Barium Titanate SynthesizedUsing Conventional Solid State Reaction Route”,Ceramics International, 40 (1 Part A), pp. 667-673,2014.

Kameswari Chebrolu and Dhekne Ashutosh“Esense: Energy Sensing-Based Cross-TechnologyCommunication”. IEEE Trans. Mob. Comput.,Vol.12(11), pp. 2303-2316, 2013.

Kamma, A., Gupta, S. R., Reddy, G. S. andMukherjee, J.“Multi-Band Notch UWB Band Pass Filter with NovelContiguous Split Rings Embedded in SymmetricallyTapered Elliptic Rings.” Progress In Electro-magnetics Research C, Vol. 39, 2013, pp.133-148.

Kanagalekar Bhushan, Das Pragya, BhujangBhushan, Muralithar, S., Singh, R.P. andBhowmik, R.K.“Triaxial shapes in 126I,” Phys. Rev. C., Vol.88, 2013,p.054306.

Kandolkar, S. S. and Mandal, J. N.“Behaviour of Reinforced Mine Waste Model Wallsunder Uniformly Distributed Loading.” The ElectronicJournal of Geotechnical Engineering, Vol.18, 2013,pp.1351-1365.

Kandpal, M., Bandela, A. K., Hinge, V. K., Rao, V. R.and Rao, C.P.“Fluorescence and piezoresistive cantilever sensingof trinitrotoluene by an upper rim tetra-benzimidazoleconjugate of calix[4]arene and the delineation of thefeatures of the complex by molecular dynamics”, ACSApplied Materials and Interfaces, Vol.5, 2013,pp.13448-13456.

Kannadassan, D., Karthik, R., Shojaei Baghini, M.,and Mallick, P.S.“Modeling the Voltage Nonlinearity of High-k MIMcapacitors”, Elsevier Solid State Electronics, January2014.

“Nanostructured Metal-Insulator-Metal Capacitorwith Anodic Titania”, Elsevier Materials Science inSemiconductor Processing, April 2013.

29

Kannan I.R., Jayanth, S., Gurnani, S. and Singh,D.N.“Influence of Initial Water Content and SpecimenThickness on the SWCC of Fine-grained Soils,”International Journal of Geomechanics, Vol. 13(6),2013, pp. 894-899.

Kant, T., Tripathi, R.K. and Rode, V.“Elastic-plastic behavior of thick plates with a higher-order shear deformation theory,” Proceedings of theIndian National Science Academy, Vol.79(4), 2013,pp. 563-574.

Kapoor, R., Sarkar, A., Singh, J., Samajdar, I., andRaabe, D.“Effect of Strain Rate on Twinning in a Zr Alloy”,Scripta Materialia, 74, 2014, pp.72-75.

Kapoor, R., Sarkar, A., Yogi, R., Kumar, S., Samajdar,I. and Chakravartty, J.K.“Softening of Al during Multi-axial Forging in aChannel Die”, MSEA, A560, 2013, pp. 404-412.

Kar, Puskar P. and Maji Avijit“Ramp Crossover Interchange: Developing the HybridUnconventional Interchange,” ITE Journal, Vol.83,No. 5, 2013, pp. 28-35.

Karade, V. and Ravi, B.“Analysis of Anatomical References to Assess theCoronal Alignment of Tibial and Femoral Cut in KneeReplacement,” Journal of Orthopaedics andTraumatology, Vol.(15), No. 2, 2013, pp.87-93.

Karikalan, S., Belur, M.N., Athalye, C.D., andRazak, R.A.“Uncontrollable dissipative systems: observabilityand embeddability”, International Journal ofControl, Volume 87, no. 1, 2014, pp. 101-119.

Karnik, A. Saroop, and Borkar V.S.“On the discussion of messages in on-line socialnetworks”, Performance Evaluation, 70(4), 2013, pp.271-285.

Karthik, R., Kannadassan, D., Shojaei Baghini, M.,and Mallick, P.S.“Nanostructured Bilayer Anodic TiO2/Al2O3 Metal-Insulator-Metal Capacitor”, Journal of Nanoscienceand Nanotechnology, American ScientificPublishers, October 2013.

Katari, M., Rajaraman, G. and Ghosh, P.“An insight into a base-free Michael addition reactionas catalyzed by a bifunctional nickel N-heterocycliccarbene complex using density functional theorystudies” Journal of Organometallic, 2014. doi.org/10.1016/j.jorganchem.2014.02.012.

Kathuria, V. and Raj, R.N.S.“Is manufacturing an engine of growth in Indiain the post-nineties?”, Journal of South AsianDevelopment, Vol. 8(3), 2013, pp. 385-408.

Kathuria, V., Raj, R.N.S. and Sen, K.“The Effects of Economic Reforms on ManufacturingDualism”, Journal of Comparative Economics,Vol.41, 2013, pp. 1240-1262.

“Do effective State-Business Relations matter for firmperformance? A study of Indian manufacturing”,Journal of Asia-Pacific Economy, Vol.18(4), 2013,pp. 654-72.

“Efficiency comparison between formal and informalfirms - Evidence from Indian manufacturing”, Journalof Industrial Statistics, Vol. 2(1), 2013, pp. 1-23.

“Productivity Measurement in Indian Manufacturing:A comparison of Alternative Methods”, Journal ofQuantitative Economics, Vol.11(1&2), 2013, pp. 148-79.

Kaur Harpreet and Jothiprakash, V.“Daily Precipitation Mapping and Forecasting UsingArtificial Intelligence Techniques” InternationalJournal of Hydrology Science and Technology, Vol. 3,No.4, 2013, pp 364-377.

Kavitha, V. and Combes, R.“Mixed polling with rerouting and applications”,Performance Evaluation, Vol. 70, No. 11, November2013, pp. 1001–1027.

Keshari Manoj and Lokhande Swapnil“Projective modules over overrings of polynomialrings and a question of Quillen,” J. Pure and AppliedAlgebra, Vol. 218, 2014, pp. 1003-1011.

Keshari Manoj and Mandal Satya“$K_0$ of hypersurfaces defined by $x_1^2+ \ldots+x_n^2 = \pm 1$ ,” Indian Journal of Pure andApplied, Vol. 44, No.2, 2013, pp.119-129.

“Another definition of Euler class group of aNoetherian ring,” Rocky Mountain J. Math., Vol.43(1), 2013, pp. 225-240.

Khakhar, D.V.“Depth profile of chemical composition and freevolume of polyurethane-urea/clay nanocomposite,”Materials Science Forum, 733, 2013, pp. 175-178.

“Density difference-driven segregation in a densegranular flow”, Journal of Fluid Mechanics, 717, pp.643-669.

Khan, S.N., Alam Aftab and Johnson, D.D.“Low-energy planar magnetic defects in BaFe2As2:Nanotwins, twins, antiphase, and domain boundaries,”Phys. Rev. B 88, 184515, 2013.

30

Khandelwal, M. and Singh, T.N.“Application of an Expert System to Predict MaximumExplosive Charge Used Per Delay in Surface Mining,”Rock Mechanics and Rock Engineering, Vol. 46(6),2013, pp. 1551-1558.

Khanna S., Kedare S.B. and Singh S.“Deflection and stresses in absorber tube of solarparabolic trough due to circumferential and axial fluxvariations on absorber tube supported at multiplepoints”, Solar Energy, Vol. 99, 2014, pp. 134-151.

“Analytical expression for circumferential and axialdistribution of absorbed flux on a bent absorber tubeof solar parabolic trough concentrator”, SolarEnergy, Vol. 92, 2013, pp. 26-40.

Kharmale, S.B., and Ghosh, S.“Performance-based plastic design of steel plate shearwalls,” Journal of Constructional Steel Research,Vol.90, 2013, pp.85-97.

Kiran, D. V., Syed A. A. and De, A“Development of process maps in two wire tandemsubmerged arc welding process of HSLA steel,”Journal of Materials Engineering and Performance,Vol.(22), No. 4, 2013, pp.988-1004.

Kishor Borkar, Venugopal, A. and Prabhu, S.V.“Pressure Measurement Technique and InstallationEffects on the Performance of Wafer Cone Design,”Flow Measurement and Instrumentation, Vol.(30), 2013,pp.52-59.

“Study on the Design and Performance of a Bi-directional Cone Flowmeter,” Flow Measurementand Instrumentation, Vol.(34), 2013, pp.151-159.

Kohli, D., Rakesh, R., Sinha, V.P., Prasad, G.J., andSamajdar, I.“Fabrication of Simulated Plate Fuel Elements: DefiningRole of Stress Relief Annealing”, Journal of NuclearMaterials, 447(1-3), 2014, pp.150-159.

Kolker, E., Srivastava, S., et al.“Reproducibility: In praise of open researchmeasures”. Nature, 498 (7453), 170, 2013.

“Towards more transparent and reproducible omicsstudies through a common metadata checklist and datapublications”, OMICS A Journal of IntegrativeBiology, Vol. 18, 2014, pp. 10-4.

Kolte, J., Daryapurkar, A., Apte, P., and Gopalan,P.“Structural and Electrical Characterization of la andMn co-substituted Bismuth Ferrite Thin Films”,Ferroelectrics, 448 (1), 2013, pp. 42-49.

Konvalinka, A., Srivastava, S. and Masellis, M.“Taking the kidney personally: The quest for novelantigens of idiopathic membranous nephropathy throughproteomic approaches”. Current Pharmacogenomicsand Personalized Medicine, Vol. 11, 2013, pp. 5-7.

Koteswararao, B., Kumar, R., Chakraborty Jayita,Byung-Gu Jeon, Mahajan, A.V., Dasgupta, I., KeeHoon Kim and Chou, F.C.“PbCu3TeO7: An S=1/2 staircase kagome lattice withsignificant intra-plane and inter-plane couplings,” J.Phys.: Condens. Matter, Vol.25, 2013, p. 336003.

Kotha, S. and Ali, R.“Diversity oriented approach to spirobarbituric acidderivatives via a [2+2+2] cycloaddition and DielsAlder reaction as key steps,” Heterocycles, Vol. 88,2014, pp. 789-787.

Kotha, S. and Chinnam, A.K.“Anomalous behavior of cis-bicyclo[3.3.0]octane-3,7-dione and its derivatives during two fold Fischer indolecyclization using low melting mixtures,” Synthesis,2014, pp.301-306.

Kotha, S. and Meshram, M.“Synthesis of novel fluoranthene-based conformationallyconstrained α-amino acid derivatives and polycyclicaromatics via the Diels–Alder reaction,” Synthesis, March2014, p.1525.

“Functionalization of anthracene by strategicutilization of the Diels Alder reaction and the ring-closing metathesis,” Journal of Indian Society.October 2013, Vol. 90, pp. 1789-1794.

Kotha, S., Ali, R. and Tiwari, A.“Diversity-oriented approach to novel spirocycliccompounds via enyne metathesis, Diels Alder reactionand a [2+2+2] cycloaddition as key steps,” Synlett,2013, pp.1921-1926. [Highlighted in Synfacts, 2013,Vol. 9, p.1172.

Kotha, S., Chinnam, A.K. and Tiwari, A.“Synthesis of indole-based propellane derivatives viaWeiss Cook condensation, Fischer indole cyclizationand ring-closing metathesis as key steps,” BeilsteinJournal of Organic, Vol.9, 2013, pp. 2709-2714.

Kotha, S., Goyal, D. and Chavan A.S.“Diversity-oriented approaches to unusual ±-aminoacids and peptides: step economy, atom economy,redox economy and beyond,” The Journal of Organic(Perspective),Vol.78, 2013, pp. 12288-12313.

Kotha, S., Goyal, D., Bitra, A., Thota, N., Kruger,G. and Anand, R.“Diversity Oriented Approach to Triazole BasedPeptidomimetics as Mammalian Sterile 20 KinaseInhibitors” RSC Advances, Vol.3, 2013, pp. 24447-24454.

31

“Diversity oriented approach to triazole basedpeptidiomimetics as mammalian sterile 20 kinaseinhibitors,” RSC Advances, October, Vol. 3, 2013,pp.24447-24454.

Kotha, S., Misra, S., Gaddamedi, S. and Bandarugattu,V.B.“Non-Metathetic Behavior of Olefin MetathesisCatalysts,” Current Organic, Vol. 17, 2013, pp. 2776-2795.

Kotha, S., Waghule, G. and Shirabhate, M.“Diversity oriented approach to normuscone and itshigher analogues by ring-closing metathesis,” TheEuropean Journal of Organic, February 2014, pp.984-992.

Koyi, H., Schmeling, H., Burchardt, S., Talbot, C.J.,Mukherjee, S., Sjostrom, H. and Chemia, Z.“Shear zones between rock units with no relativemovement,” Journal of Structural Geology, Vol. 50,May 2013, pp. 82-90.

Krishna Priya G. S. and Bandyopadhyay S.“Emission Constrained Power System Planning: A PinchAnalysis Based Study of Indian Electricity Sector”,Clean Technologies and Environmental Policy, Vol.15, 2013, pp. 771-782.

Krishna Priya G. S., Thakare M. S., Ghosh P. C. andBandyopadhyay S.“Sizing of Standalone Photovoltaic Thermal (PVT)Systems Using Design Space Approach”, Solar Energy,Vol. 97, 2013, pp. 48-57.

Krishnaswamy Srinivasan and Pillai Harish K.“On the number of special feedback con gurations inlinear modular systems”, Systems and Control Letters,Vol. 66, 2014, pp 28-34.

Krithi Ramamritham and Catherine H. Gebotys“Editorial Introduction of New Associate Editors”,Embedded Systems Letters, Vol.5(1), pp. 1-3, 2013.

Kuksenok, O., Dayal, P., Bhattacharya, A., Yashin,V.V., Deb, D., Chen, I.C., Van Vliet, K.J. and Balazs,A.C.“Chemo-responsive, self-oscillating gels that undergobiomimetic communication,” Society Reviews,Vol.(45), No.13, 2013, pp.2160-2168.

Kulkarni A.T., Mohanty, J., Eldho T.I., E.P. Rao,and Mohan, B.K.“A Web GIS Based Integrated Flood AssessmentModeling Tool for Coastal Urban Watersheds”,Journal of Computers & Geosciences, Elsevier, Vol.64, 2014, pp.7-14.

Kulkarni Ankur A. and Negar Kiyavash“Non-asymptotic Upper Bounds for Single-DeletionCorrecting Codes”, IEEE Transactions on

Information Theory, Vol 59, No. 8, 2013, pp. 5115 –5130.

Kulkarni Ankur A., Negar Kiyavash and Sreenivas,R.“On the Varshamov-Tenengolts Construction on BinaryStrings”, Discrete, 2013, pp 79 – 90.

Kulkarni Malhar“Complementary Development of Language Studiesand Philosophy of Language in India,” in Culture andArts, Nota Bene, Moscow, DOI: 10.7256/2222-1956.2013.02.5,Vol.2, 2013, pp. 161-167.

Kulkarni Malhar, Katira Dipesh, DharurkarChinmay and Oak Rajashree“Issues of errors in usage of Adjectives in the Syntaxof Moern Sanskrit,” in the Journal of the OrientalInstitute, M.S. University of Baroda, Vadodara, Vol. LXI,September- December 2011 and March-June 2012, ISSN0030-5324, Nos. 1-4, 2013, pp. 127-142.

Kulkarni Rekha P. and Rane, A.S.“Asymptotic expansions for approximate solutions ofHammerstein integral equations with Green’s functiontype kernels,” Mathematical Modelling and Analysis,Volume 19, 2014, pp. 127-143.

Kulkarni Rekha P., Grammont, L. and Vasconcelos,P.“Modified projection and the iterated modifiedprojection methods for nonlinear integral equations,”Journal of Integral Equations Appl. Volume 25, 2013,pp.481-516.

Kulkarni, S. and Emmadi, M.“Expeditious synthesis of bacterial, rare sugarbuilding blocks to access the prokaryotic glycome”Org. Biomol. Chem., 2013, Vol.11, pp.3098-3102.(Top 10 accessed articles)

“Orthogonally Protected D-GalactosamineThioglycoside Building Blocks via HighlyRegioselective, Double Serial and Double ParallelInversions of β-Thiomannoside” - Org. Biomol.Chem., 2013, Vol.11, pp.4825-4830.

“Synthesis of Orthogonally Protected Bacterial, RareSugar and D-Glycosamine Building Blocks,” NatureProtocols 2013. Vol.8, pp.1870 – 1889.

Kulkarni, S.“ Synthesis of Asparagine Linked Archaeal N-Glycanfrom Methanothermus Fervidus” - Sanapala, Chem.Eur. J. 2014, Vol.20, pp.3578-3583.

Kulkarni, S., Emmadi, M. and Adak S.“Synthesis of the trisaccharide moiety and acholesteryl analog of phyteumosides,” RSC Advances,2014, Vol.4, pp.7611-7616.

32

Kumar Praveen, Jangid, R.S. and Reddy, G.R.“Response of piping system with semiactive variablefriction dampers under tri-directional seismicexcitation”, International Journal of StructuralEngineering, Vol. 4, 2013, pp. 234-250.

“Response of piping system with semi-active variablestiffness damper under tri-directional seismicexcitation”, Nuclear Engineering and Design, Vol.258, 2013, pp. 130-143.

Kumar R., Gravel E., Hagège A., H. Li, Jawale,D. V.,Verma D., Namboothiri, I. N. N. and Doris, E.“Carbon Nanotube-gold Nanohybrids for SelectiveCatalytic Oxidation of Alcohols,” Nanoscale 2013,Vol.5, pp.6491-6497.

Kumar Ranjan, Choudhury Deepankar and BhargavaKapilesh“Response of shallow foundation in rocks subjectedto underground blast loading using FLAC3D”,Disaster Advances, (ISSN: 0974-262X, ImpactFactor: 2.272/2012) India, Vol. 7, No. 2, 2014, pp.64-71.

Kumar Sunil K. and Subash Babu, A.“Prospecting rural supply chain management using astructured approach,” International Journal ofProcurement Management, Vol.(6), No.3, 2013, pp.255-279.

“Mapping structural relationships among the criticalfactors of rural supply chains,” International Journalof Logistics Systems and Management, Vol.(16), No. 4,2013, pp.399-425.

Kumar T., Mobin S. M. and Namboothiri, I. N. N.“Regiospecific Synthesis of Arenofurans via CascadeReactions of Arenols with Morita-Baylis-HillmanAcetates of Nitroalkenes and Total Synthesis ofIsoparvifuran,” Tetrahedron 2013, Vol.69, pp.4964-4972.

Kumar Vijay, Venkataraman Gopalan, Hogda KjellArild and Yngvar Larsen“Estimation and validation of glacier surface motionin the northwestern Himalayas using high-resolutionSAR intensity tracking”, International Journal ofRemote Sensing, Vol.34, No.15, 2013, pp.5518-5529.

Kumar, D., Prakasham, A. P., Bheeter, L. P., Sortais,J. B., Gangwar, M., Roisnel, T., Kalita, A., Darcel,C. and Ghosh, P. J.“Cationic Iron(II) Complexes of the MixedCyclopentadienyl (Cp) and the N-heterocyclicCarbene (NHC) Ligands as Effective Precatalysts forthe Hydrosilylation of Carbonyl CompoundsOrganomet. Chem., Vol.762, 2014, pp. 81-87.

Kumar, M. and Balaji, P.V.“CH...pi interactions in proteins: Prevalence, patternof occurrence, residue propensities, location andcontribution to protein stability”. J. Mol. Model., Vol.No. 20, 2136, 2014, pp. 1-14.

Kumar, N., Prabhakar, A., Tikekar, M., Singh, S.G.and Agrawal, A.“Blood flow in non-circular microchannel underpulsating condition,” International Journal of Micro-Nano Scale Transport, Vol.(4), 2013, pp.33-49.

Kumar, P., Siddiqui, M. M., Reddi, Y., Mague, J.T., Sunoj, R. B. and Balakrishna, M. S.“New bisphosphomide ligands, 1,3-phenylenebis( ( d i p h e n y l p h o s p h i n o ) m e t h a n o n e ) [ 1 , 3 -P h 2 P C ( O ) } 2 C 6 H 4 ] a n d ( 2 - b r o m o - 1 , 3 -phenylene)bis((diphenylphosphino)methanone)[1,3-Ph2PC(O)}2C6H4Br]: Synthesis, coordination behavior,DFT calculations and catalytic studies”, Dalton Trans.2013, 42, 11385-11399.

Kumar, P., More, S., Singh. R. and Joshi, S.S.“Experimental Characterization of Plane and ConformalHydrodynamic Polishing of Machined Single CrystalSapphire,” Manufacturing Letters, Vol.(2), No. 4, 2013,pp.70-73.

Kumar, P., Reddi, Y., Siddiqui, M. M., Mague, J. T.,Sunoj, R. B. and Balakrishna, M. S.“New Bisphosphomide Ligands, 1,3-Phenylenebis((diphenylphosphino)methanone [1,3-Ph2PC(O)}2C6H4]and (2-Bromo-1,3 phenylene)bis((diphenylphosphino)methanone) [1,3-Ph2PC(O)}2C6H4Br]: Synthesis,Coordination behavior, DFT Calculations andCatalytic Studies” Dalton Trans., Vol.42, p.11385.

Kumar, P., Tiwari, A.N. and Bhargava, P.“Effect of Process Parameters and BinderConcentration on Properties of Phosphate BondedAlumina”, Transactions of the Indian CeramicSociety, 72(2), 2013, pp. 130-135.

Kumar, R., Kumar, T., Mobin S. M. and Namboothiri,I. N. N.“Rauhut-Currier Reaction of Nitroalkenes with VinylSulfones” J. Org. Chem.2013, Vol.78, pp.5073-5077.

Kumar, R., Gravel, E., Hagège, A., Verma, H.,Namboothiri, I. N. N. and Doris, E.“Direct Reductive Amination of Aldehydes Catalyzedby Carbon Nanotube/Gold Nanohybrids,” Chem CatChem 2013, Vol.5, pp. 3571-3575.

Kumar, R., Nair, D. and Namboothiri, I. N. N.“Reactions of Vinyl Sulfone with ±-Diazo-²-Ketosulfone and Bestmann-Ohira Reagent For theRegioselective Synthesis of Highly FunctionalizedPyrazoles,” Tetrahedron 2014, Vol.70, pp.1794-1799.

33

Kumar, S. S., Thayalan, R., Vadapalli, C. andRajaraman, G.“Theoretical Studies on {3d-Gd} and {3d-Gd-3d}Complexes: Effect of Metal Substitution on theEffective Exchange Interaction” Polyhedron, Vol. 66,2013, pp. 81-86.

Kumar, S., Das, A. and Sen, S.“Extracellular matrix density promotes EMT byweakening cell-cell adhesions”, MolecularBioSystems, doi:10.1039/C3MB70431A, Vol. 10 (4), 2014,pp. 838 – 850.

Kumar, S., Daverey, A., Sahu, N.K. and Bahadur, D.“In Vitro Evaluation of PEGylated MesoporousMgFe2O4 Magnetic Nanoassemblies (MMNs) forChemo-thermal Therapy”, Journal of MaterialsChemistry B, 1, 2013, pp. 3652–3660.

Kumar, S.K., and Subash Babu, A.“Mapping structural relationships among the criticalfactors of rural supply chains”, International Journalof Logistics Systems and Management, Vol. 16, Issue4, November 2013, pp. 399 – 425.

“Prospecting rural supply chain management using astructured approach”, International Journal ofProcurement Management, Vol. 6, Issue 3, 2013, pp.255-279.

Kundu, S., Gollu, S.R., Sharma, R., Kulkarni, A.R.,Gupta, D.“Device Stability of Inverted and Conventional BulkHeterojunction Solar Cells with MoO3 and ZnONanoparticles as Charge Transport Layers”, OrganicElectronics:Physics, Materials, Applications, Volume14, Issue 11, 2013, pp. 3083-3088.

Kuniyil, R. and Sunoj, R. B.“N-Heterocyclic Carbene Catalyzed AsymmetricIntermolecular Stetter Reaction”, Origin ofEnantioselectivity and Role of Counterions” Org.Lett., Vol.15, 2013, p.5040.

Kurode Shailaja, Spurgeon Sarah, K.,Bandyopadhyay, B. and Gandhi, P. S.‘‘Sliding mode control for slosh-free motion using anonlinear sliding surface”, IEEE/ASME Transactionson Mechatronics, Vol. 18, No. 2, April 2013. pp. 714-724.

Kushwaha Ajay and Aslam, M.“Defect controlled water splitting characteristics ofgold nanoparticles functionalized ZnO nanowirefilms,” RSC Adv. Vol.4, 2014, pp.20955-20963.

“ZnS shielded ZnO nanowire photoanodes forefficient water splitting,” Electrochimica Acta 130,2014, pp.222–231.

“High and stable electrical conductivity in hydrogenincorporated ZnO nanowire array films,” J. Phy. D:Appl. Phy, Vol.46, No.48, 2013, p.485104.

Kushwaha Ajay, Tyagi Himanshu and Aslam, M.“Role of defect states on magnetic and electricalproperties of ZnO nanowires,” AIP Advances, Vol.3,2013, p.042110.

Lahiri, G. K., Ray, R., Chowdhury, A. D., Maiti, D. andLahiri, G. K.“Iron Catalysed Nitrosation of Olefins to Oximes”,Dalton Trans, Vol.43, 2014, pp.38-41.

Lahiri, S., Mehta, G.D., Ghosh, S.K.“Iml3p, a component of the Ctf19 complex of thebudding yeast kinetochore is required to maintainkinetochore integrity under conditions of spindlestress”. FEMS Yeast Res. Vol. 13(4), 2013, pp.375-85.

Laik, A., Mishra, P., Bhanumurthy, K., Kale, G.B. andKashyap, B.P.“Microstructural Evolution during Reactive Brazing ofAlumina to Inconel 600 using Ag-based Alloy”, ActaMaterialia, 61 (1), 2013, pp. 126-138.

Lal Ram Rathan, B. and Mandal J.N.“Behavior of Cellular-Reinforced Fly-Ash Wallsunder Strip Loading,” Journal of Hazardous, Toxicand Radioactive Waste, ASCE, Vol. 18, No. 1, 2014,pp. 45-55.

“Model Tests on Geocell Walls Under Strip Loading,”Geotechnical Testing Journal, ASTM, Vol. 37, No.3, 2013, pp. 477-487.

Lee Bum-Hoon, Lee Wonwoo, RichardMacKenzie, Paranjape M.B., Yajnik, U.A. andDong-han Yeom“The Battle of the Bulge: Decay of the Thin, FalseCosmic String,” Phys.Rev. D, Vol.88, 2013, p.105008.

“Tunneling decay of false vortices,” Phys.Rev. D.Vol.88, 2013, p. 085031.

Limaye Balmohan V. and Mario Ahues“On condition numbers of a basis,” Linear Algebraand its Applications, Vol. 439, 2013, pp. 3359-3377.

Lisitsin, V., González-Álvarez, I, Porwal, A.“Regional prospectivity analysis for hydrothermal-remobilized nickel mineral systems in western Victoria,Australia”, Ore Geology Reviews Special Issue 52,2013, pp.100-112.

34

Madhavan, B.L., Gross, B.M., Zhang, Q. and Zhou,S.“Aerosol transport and source attribution usingsunphotometers, models and in-situ compositionmeasurements,” IEEE Transactions on Geoscienceand Remote Sensing, 51(7), art. no. 6423282, 2013,pp. 3803-3811.

Madhu, S., Sharma D. K., Basu, S.K. , Jadhav, S.,Chowdhury, A. and Ravikanth, M.“Sensing Hg(II) in vitro and in vivo using abenzimidazole substituted BODIPY”, Inorganic (2013),Vol.52, pp.11136-11145

Mahajani, S. and Aghalayam, P.“Comparison between two types of Indian coals forthe feasibility of Underground Coal Gasificationthrough laboratory scale experiments”, Fuel, 113,2013, pp. 837-843.

Mahajani, S.M.“Esterification of fusel oil using reactive distillation.Part II: Process alternatives,” Industrial andEngineering Research, 52(47), 2013, pp. 16637-16647.

“Esterification of oleic acid with glycerol in the pr nceof supported zinc oxide as catalyst,” Industrial andEngineering Research, 52 (42), 2013, pp. 14776-14786. Cited 1 time.

“Reactive stripping for the catalytic exchange ofhydrogen isotopes”, Industrial and Engineering Rarch, 52 (32), 2013, pp. 10935-10950.

Mahajani, S.M. and Malik, R.K.“A Conceptual design algorithm for single-feed hybridreactive distillation column involving azeotropicsystems”, Computer Aided Engineering, 32, 2013,pp. 313-318.

Mahajani, S.M. and Patwardhan, S.C.“Analysis of steady-state multiplicity in reactivedistillation columns”, Industrial and EngineeringResearch, 52 (14), 2013, pp. 5191-5206.

Mahapatra, A. K., Kumar, S. and Vellaisamy, P.“Improved estimators for the reliability of a seriessystem,” International Journal of Reliability,Quality and Safety Engineering, Vol.20, 2013, pp.1-23.

Mahongo S.B. and Deo, M.C.“Using Artificial Neural Networks to ForecastMonthly and Seasonal Sea Surface TemperatureAnomalies in the Western Indian Ocean,” TheInternational Journal of Ocean and ClimateSystems, Multi-Science, Vol.4(2), 2013, pp.133-150.

Maity, S., Manna, S., Rana, S., Togati, N., Mallick,A and Maiti, D.“Efficient and stereoselective nitration of mono- anddisubstituted olefins with AgNO2 and TEMPO.” J. Am.Chem. Soc., Vol.135, 2013, p. 3355.

Maity, S., Togati, N., Sharma U. and Maiti, D.“Stereoselective Nitration of Olefins with tBuONO andTEMPO: Direct Access to Nitroolefins under Metal-free Condition.” Org. Lett., Vol.15, 2013, p. 3384.

Maji Avijit, Mishra Sabyasachee, and Jha Manoj K.“Diverging Diamond Interchange Analysis: PlanningTool,” Journal of Transportation Engineering, Vol.139,No. 12, 2013, pp. 1201-1210.

Maji Bibekananda, Suresh K.G. and Nigam A.K.“Anomalous magnetotransport and magnetocaloricproperties of NdRu2Ge2”, Appl. Phys. Lett. Vol.102,2013, p. 062406.

Maji, A., Rana, S., Akanksha and Maiti, D. “Synthesis of Bis-heteroaryl Ketones via Removalof Benzylic –CHR– and –CO– Groups.” Angew.Chem. Int. Ed., Vol. 53, 2014, p. 2428.

Malhotra, D., Diwakar, S., Ozdemir, V. Nair, B,Srivastava, S.“BIOQUEST India: A global biotechnology forum forknowledge-based innovation and sustainabledevelopment”. Current Pharmacogenomics andPersonalized Medicine, Vol. 11, 2013, pp. 8-11.

Malik, R., and Mahajani, S.Selectivity engineering with single-feed hybridreactive distillation columns”, Engineering Science,99, 2013, pp. 324-334.

Mallick, K., Samuel, V.P., Belur, S.B., and Belur,M.N.“State space model extraction tool from firstprinciples”, accepted for publication in IEEE ControlSystems Magazine, 2014.

Mallick, M., Dutta, S., and Greenwood, P.F.“Molecular characterization of fossil and extant dammarresin extracts: Insights into diagenetic fate of sesqui-and triterpenoids,” International Journal of CoalGeology, Vol.121, 2014, pp. 129-136.

Malshe Milind“A Review on the Nature, Scope and History ofComputer Assisted Language Learning”, CriticalEnquiry, Co-author Amit Hiray, Vol. 5, No. 3, 2013,pp. 66-82.

“From Suffering to Hope and Faith: The Pragmatic Valueof Inspirational Literature” in Making Sense ofSuffering Edited by Bev Hogue and Anna Sugiyama

35

(E-book) Interdisciplinary Press, Co-author MadhaviGokhale.

Manavalan, R. and Rao, Y.S.“DEM and SAR image based flood feature extractiontechniques to map the deep and shallow flood inundatedregions of known as well as remote disaster regions”,Geocarto International, 2013,http://dx.doi.org/10.1080/10106049.2013.838310

Mandal Arjun, Agarwal Akshay, Ghadi Hemant, GomaKumari K. C. , Basu Arindam , Subrahmanyam N. B.V. , Singh Pitamber and Chakrabarti, S.“More than one order enhancement in peak detectivity(D*) for quantum dot infrared photodetectors implantedwith low energy light ions (H-),” Applied Letters,Vol.102, 2013, pp.051105.

Mandal, A., Kundu, T., Ehret, F., Bubrin, M., Mobin, S.M., Kaim, W. and Lahiri, G. K.“Varying electronic structural forms ofruthenium complexes of non-innocent 9,10-phenanthrenequinonoid ligands”, Dalton Trans.Vol.43, 2014, pp.2473-2487.

Mandal, et al,“Proposed mechanism to repr nt the suppression ofdark current density by four orders with low energylight ion (H-) implantation in quaternary alloy-cappedInAs/GaAs quantum dot infrared photodetectors”,Materials R arch Buletin,Volume 48, Issue 8, 2013, pp.2886-2891.

Mandal, J.C. and Sonawane C.R.“Simulation of Flow Inside Differentially HeatedRotating Cavity”, International Journal of NumericalMethods for Heat and Fluid Flow, Vol.23, issue 1,2013, pp.23-54.

Mandal, Verma, U. and Chakrabarti, S.“Effects of ex situ annealing on quaternary alloy(InAlGaAs) capped InAs/GaAs quantum dotheterostructures on optimization of optoelectronicand structural properties with variation in growth rate,barrier thickness, and seed quantum dot monolayercoverage,” Superlattices and Microstructures, Volume58, June 2013, pp. 101-119.

Mandapati, R., Borkar, A., Srinivasan, S., Bafna,P., Karkare, P., Lodha, S., and Ganguly, U.“On Pairing Bipolar RRAM memory element withnovel punchthrough diode based selector: compactmodeling to array performance” in 5th IEEEInternational Nanoelectronics Conference (INEC),January 2013, pp. 309.

Maneru, D. R., Pal, A. K., Moreira, I. de. P. R.,Datta, S. N. and Illas, F.“The Triplet-Singlet Gap in the m-Xylylene Radical:A Not So Simple One.” Journal of Theory and

Computation, (013, dx.doi.org/10.1021/ct400883m;Vol.10, 2014, pp.335-345.

Manna J., Roy B., Vashistha M. and Sharma P.“Zeolite supported cobalt catalysts for sodiumborohydride hydrolysis”, Applied Mechanics andMaterials, Vol. 490-491, 2014, pp. 213-217.

“Effect of Co+2/BH4- ratio in the synthesis of Co-B

catalysts on sodium borohydride hydrolysis”,International Journal of Hydrogen Energy, Vol. 39,2014, pp. 406-413.

Manna, S., Jana, S., Saboo, T., Maji, A. and Maiti, D.“Synthesis of (E)-Nitroolefins via DecarboxylativeNitration using t-Butylnitrite (t-BuONO) and TEMPO.”Chem. Commun., Vol. 49, 2013, p. 5286.

Manu, M. K., Kumar, R. and Garg, A.“Physical and characterization of yard waste,”International Journal of Applied EngineeringResearch, Vol. 16, December 2013, pp. 1891-1896.

Marchattiwar, A., Sarkar, A., Chakravartty, J.K.and Kashyap, B.P.“Dynamic Recrystallization during Hot Deformationof 304 Austenitic Stainless Steel”, Journal ofMaterials Engineering and Performance, 22 (8),2013, pp. 2168-2175.

Mariappan, V., Subash Babu A., Amonkar, U.J.,Dhawalikar, M.N. and Sakhardande, M.J.“Integrated graphical model to evaluate multi-criteria maintenance policies for degradablesystems,”International Journal of Systems andAssurance Engineering Management , Vol.(4), No.1,2013, pp.67-77.

Marla D., Bhandarkar U.V. and Joshi S.S.“Transient analysis of laser ablation process withplasma shielding: 1-D model using FVM,” Trans.ASME, Journal of Micro and Nano-Manufacturing,Vol.(1), 2013, pp.011007.

Masterton, S.M., Gubbins, D., Mueller, R.D. andSingh, K.H.“Forward modelling of ocean lithosphericmagnetization,” Geophysical Journal International,Vol. 192, 2013, pp. 951-962.

Mathew, R.P., Tripathi, S.M., Banerjee, S. andDutta, S.“Palynology, Palaeoecology and PalaeodepositionalEnvironment of Eocene Lignites and AssociatedSediments from Matanomadh Mine, Kutch Basin,Western India,” Journal of the Geological Societyof India, Vol. 82, October 2013, pp. 236-248.

36

Mathur, P., Tauqeer, Md., Ji, R. S., Lahiri, G. K.and Mobin, S. M.“Some unusual reactions of metal carbonyls with (Z)-1-ferrocenyltelluro-1-ferrocenyl-4-ferrocenyl-1-buten-3-yne”, RSC Adv. Vol. 4, 2014, pp.6878-6885.

Mathur, P., Tauqeer, Md., Torubaev, Y. V., Mobin, S. M.,Lahiri, G. K., Pasynskii, A. A. and Pavlova, A. V.“Step-by-step transformations of ferrocenyltelluriumcomplexes of Group VIB metal carbonyls”, J.Organomet. Chem. Vol.758, 2014, pp.55-59.

Mavilla N. R., Solanki C. S. and Vasi J.“Raman spectroscopy of silicon-nanocrystalsfabricated by inductively coupled plasma vapordeposition” Physica E: Low-dimensional Systems andNanostructures, Vol. 52, 2013, pp. 59.

“Optical Bandgap Tunability of Silicon NanocrystalsFabricated by Inductively Coupled Plasma CVD for NextGeneration Photovoltaics”, IEEE Journal ofPhotovoltaics, Vol. 3, 2013, pp. 1279.

Mazurok, D., Fursenko, R., Minaev, S., Lutsenko,N. and Kumar Sudarshan“Stabilization of premixed flame in microchannel withslowly varying temperature of the walls,” CombustionExplosion and Shock Waves, Vol. 50(1), 2014, pp.25-31.

Meenal, M. and Eldho T.I.“Aquifer Decontamination Studies Using a MeshfreePoint Collocation Method (PCM),” Journal ofGround Water Research, AGGS, Vol.2(1), 2013,pp.163-172, ISSN: 2321-4783.

Meerschaert, M. M., Nane, E. and Vellaisamy, P.“Transient anomalous subdiffusions on boundeddomains,” Proceedings of American MathematicalSociety, Vol. 141,2013,pp. 699-710.

Mehra, S.“Transcriptomic study of ciprofloxacin resistance inStreptomyces coelicolor A3(2),” Molecular BioSystems,9 (12), 2013, pp. 3101-3116.

“Comparative Phylogenomics of Pathogenic and Non-Pathogenic Mycobacterium”, PLoS ONE, 8 (8), 2013,art. no. E71248 .

Mehta A.J., Thun G.A., Imboden M., Ferrarotti I.,Keidel D., Künzli N, Kromhout H, Miedinger D,Phuleria HC, Rochat T, Russi EW, Schindler C,Schwartz J, Vermeulen R, Luisetti M, Probst-Hensch N; SAPALDIA team.“Interactions between SERPINA1 PiMZ genotype,occupational exposure and lung function decline”,Occupational & Environmental Medicine, 2013,doi: 10.1136/oemed-2013-101592.

Mehta, D.G., Kumar, R., Srivastava, S. and Ghosh,S.K.“Cohesin: Functions beyond sister chromatidcohesion”. FEBS Letters, Vol. 587(15), 2013, pp.2299-312.

Mehta, G.D., Agarwal, M.P. and Ghosh, S.K.“Functional characterization of kinetochore protein,Ctf19 in meiosis I: An implication of differentialimpact of Ctf19 on the assembly of mitotic andmeiotic kinetochores in Saccharomyces cerevisiae”.Molecular Microbiology, Vol. 91(6), 2014, pp. 1179-99.

Mehta, M., Chatterjee, K. and De, A.“Monitoring torque and traverse force in friction stirwelding from input electrical signatures of drivingmotors,” Science and Technology of Welding andJoining, Vol.(18), No. 3, 2013, pp.191-197.

Mehta, S., Desai, K.P., Naik, H. B. and Atrey, M. D.“Investigation on Performance improvement ofStanding wave type thermo acoustic prime mover usingacoustic amplifier,” Indian Journal of Cryogenics ,Vol.(38) 1:4, 2013, pp.184-189.

Meshram, N., Kumbhar, A., and Dusane, R.O.“Synthesis of Silicon Nanowires using Tin Catalystby Hot Wire Vapor Processing”. Materials R archBulletin. 48, 2254, 2013.

Midya Kousik, Dhar Subhabrata andKottantharayil Anil“Trap characterization of silicon nitride thin films bya modified trap spectroscopy technique,” J. Appl.Phys. Vol. 114, 2013, p.154101.

Mir, B.A. and Juneja, A.“Permeability and consolidation behaviour ofcomposite ground reinforced with sand columns”,International Journal of GEOMATE, Vol.6(2), 2014,pp. 832-839.

Mir, N.A., Haque, M.M., Khan, A., Muneer, M., andVijayalakshmi, S.“Photocatalytic degradation of herbicide Bentazonein aqueous suspension of TiO2: mineralization,identification of intermediates and reaction pathways,”Environmental Technology, Vol.35 (4), 2014,pp.407-415.

Mir, N.A., Khan, A., Muneer, M., andVijayalakshmi, S.“Photocatalytic degradation of a widely usedinsecticide Thiamethoxam in aqueous suspension ofTiO2: Adsorption, kinetics, product analysis andtoxicity assessment,” Science of The TotalEnvironment, Vol. 458, 2013, pp.388-398.

37

Mishra S.K., Tatiparti S.S.V., Tiwari S.M.,Raghavan R.S., Li J.J. and Carsley J.E. “Annealing response of AA5182 deformed in planestrain and equibiaxial strain paths”, Philos. Mag., Vol.93, 2013, pp. 2613-2629.

Mishra Sabyasachee, Sharma Sushant, Mathew TomV. and Khasnabis Snehamay“Multiobjective Optimization Model for Transit FleetResource Allocation, Transportation ResearchRecord,” Journal of the Transportation ResearchBoard, Vol. No. 2351, Transportation R arch Boardof the National Academies, Washington, D.C., 2013,2014, pp. 1-13.<http://dx.doi.org/10.3141/2351-01>

Mishra, J. K., Dhar, S. and Singh, B. P.“Electrical and optical spectroscopic study of Gddoped GaN epitaxial layers,” Procedia, Vol.49, 2013,p.118.

Mistry, C. and Pradeep, A.M.“Experimental Investigation of the Effect of RadiallyDistorted Inflow on a Contra-Rotating Fan Stage”,International Journal of Rotating Machinery, Vol.2014, 2014, Article ID 503579, 14 pages.

“Influence of Circumferential Inflow Distortion onthe Performance of a Low Speed, High Aspect RatioContra Rotating Axial Fan”, Transactions ASME,Journal of Turbomachinery, Vol. 136, 2014,071009-1-11.

Mita Rajaram, Anand, S.P. and Singh, K.H.“Proxy heat flux and magnetization model fromsatellite magnetic data,” Journal of Geophysics, Vol.34, 2013, pp. 55-61.

Mitra Mithun K., Taylor Paul R., Hutchison ChrisJ., McLeish, T. C. B. and Chakrabarti Buddhapriya“Delayed self-regulation leads to novel states inepigenetic landscapes,” arXiv:1306.2538 [q-bio],2013.

Mitra, A., A. Sivaiah, Mittal, A. K., Bhakta, S. andRao, C.P.“Diimino conjugate of glucosyl-cresol as receptor forCu2+ and its complex for cysteine and histidine”,Trends In Carbohydrate R arch, Vol.5, 2013, pp. 1 –5.

Mitra, S., Kulkarni, A.R. and Prakash, O.“Diffuse Phase Transition and Electrical Propertiesof Lead-Free Piezoelectric (Lixna1-X) NbO3 (0.04≤ X ≤ 0.20) Ceramics near Morphotropic PhaseBoundary”, Journal of Applied , 114 (6), art. No.064106, 2013.

Mittal S.K., Momaya, K. and Sushil, S.“Longitudinal and Comparative Perspectives on theCompetitiveness of Countries: Learning fromTechnology and the Telecom Sector”, Journal ofCENTRUM Cathedra: The Business and EconomicsResearch Journal, Vol. 6(2), 2013, pp. 235-256.

Mittal, S., Gupta, S., Nainani, A., Abraham, M.,Schuegraf, K., Lodha, S., and Ganguly, U.“Epi Defined (ED) FinFET: An alternate devicearchitecture for high mobility Ge channel integrationin PMOSFET” in 5th IEEE International NanoelectronicsConference (INEC), January 2013, pp. 367.

Modak A., Dutta U.,Kancherla R., Maity S., BhadraM., Mobin S.M. and Maiti D.“Predictably Selective (sp3)C–O Bond Formationthrough Copper Catalyzed Dehydrogenative Coupling:Facile Synthesis of Dihydro-oxazinone Derivatives,”Org. Lett., 2014, Vol.16, p.2602.

Modak, A., Bhaumik, P. and Phale, P. S.“Periplasmic glucose-binding protein fromPseudomonas putida CSV86--identification of theglucose-binding pocket by homology-model-guidedsite-specific mutagenesis”, FEBS J., Vol. 281(1),2014, pp. 365-375.

Modak, A., Togati, N. and Maiti, D.“An efficient dehydroxymethylation reaction by apalladium catalyst.” Chem. Commun., 2013, Vol.49,p.252.

Mohanta, P., Singh, D., Kumar, R., Ganguli Tapas,Srinivasa, R.S. and Major, S.S.“Effect of ZnO buffer layer thickness on the epitaxialgrowth of GaN by reactive magnetron sputtering,” ThinSolid Films, Vol.544, 2013, p. 238.

Mohanty, S. Jasmine, J., and Mukherji, S.“Practical Considerations and Challenges Involvedin Surfactant Enhanced Bioremediation of Oil”BioMed R arch International, Volume 2013, ArticleID 328608, 2013, pp. 1-16.

Mohapatra, J., Mitra, A., Bahadur, D. and Aslam,M.“Surface Controlled Synthesis of MFe2O4 (M = Mn,Fe, Co,Ni and Zn) Nanoparticles and their MagneticCharacteristics”, Cryst. Eng. Comm., 15, 2013, pp.524-532.

Moharir, A.S. and Gudi, R.D.“An improved Green’s function method for isothermaleffectiveness factor determination in one- and two-dimensional catalyst geometries”, EngineeringScience, 91, 2013, pp. 197-211.

38

Moiyadi, A., Syed, P., Srivastava, S.“Fluorescence-guided surgery of malignant gliomasbased on ALA: Paradigm shifts but not a panacea”,Nature Reviews Cancer, Vol. 14(2), p. 146, 2014.

Mondal S., Thakur P. and Solanki C. S.“Diffused bulk channels instead of laser drilled via-holes in emitter wrap-through solar cell structure: Asimulation study”, Solar Energy, Vol. 96, 2013, pp. 119-127.

Mondal, A., Ghosh, S. and Reddy, G.R.“Performance-based evaluation of the responsereduction factor for ductile RC frames,” EngineeringStructures, Vol.56, 2013, pp.1808-1819.

Mondal, P., Ehret, F., Das, A., Mobin, S. M., Kaim, W.and Lahiri, G. K.“A Diruthenium Complex of a “Nindigo” Ligand”, Inorg.Chem., Vol.52, 2013, pp.8467-8475.

Mondal, R., Bansal, B., Mondal, A., Chakrabarti S.and Pal, B.“Pauli blocking dynamics in optically excitedquantum dots: A picosecond excitation-correlationspectroscopic study,” Physical Review B, Vol. 87,2013, pp.115317.

Montoya Fernando, Rivera, M., Escalona, J. andParmananda, P.“Construction of Arnold tongue structures for coupledperiodic oscillators,” Phys. Lett. A., Vol. 377, 2013,pp. 3124–3127.

Mukherjee Asmita, Nair Sreeraj and Ojha VikashKumar“Generalized Parton Distributions of the Photon withHelicity Flip,” Phys.Lett. B., Vol. 721, 2013, pp. 284-289.

Mukherjee Biswajeet, Patel Pragati andMukherjee Jayanta“Hemispherical Dielectric Resonator Antenna basedon Apollonian Gasket of circles – A Fractal approach”,IEEE transactions on Antenna and Propagation,Vol. 62, No. 1, January 2014.

“A Novel Cup-shaped Inverted HemisphericalDielectric Resonator Antenna for WidebandApplications”, IEEE Antenna and WirelessPropagation Letters, Vol. 12, 2013.

Mukherjee, S.“Higher Himalaya in the Bhagirathi section (NWHimalaya, India): Its structures, backthrusts andextrusion mechanism by both channel flow and criticaltaper mechanisms,” International Journal of EarthSciences, Vol. 102, October 2013, pp. 1851-1870.

“Channel flow extrusion model to constrain dynamicviscosity and Prandtl number of the Higher HimalayanShear Zone,” International Journal of EarthSciences, Vol. 102, October 2013, pp. 1811-1835.

“Kinematics of ‘top-to-down’ simple shear in aNewtonian Rheology,” The Journal of IndianGeophysical Union, Vol. 18, April 2014, pp. 273-276.

Mukherjee, S. and Biswas, R.“Kinematics of horizontal simple shear zones ofconcentric arcs (Taylor Couette flow) withincompressible Newtonian rheology,” InternationalJournal of Earth Sciences, Vol. 103, March 2014,pp. 597-602.

Mukherjee, S. and Mulchrone K.“Viscous dissipation pattern in incompressibleNewtonian simple shear zones: An analytical model,”International Journal of Earth Sciences, Vol. 102,June 2013, pp. 1165-1170.

Mukhopadhyay, A., Anton Tokranov, Fei Guo,Xingcheng Xiao, Robert H. Hurt and Brian W. Sheldon“Engineering of Graphene Layer Orientation to AttainHigh Rate Capability and Anisotropic Properties”,Adv. Funct. Mater., 23 (19), 2013, pp. 2397-2404.

Mukhopadhyay, A., Venkateswaran, T. andBikramjit Basu“Spark Plasma Sintering may Lead to Phase Instabilityand Inferior Properties”, A Case Study with TiB2,Scripta Mater., 69(2), 2013, pp. 159-164.

Mukhopadhyay, Amartya and Brian W. Sheldon“Deformation and Stress in Electrode Materials forLi-ion Batteries”, Prog. Mater. Sci., 63, 2014, pp. 58–116.

Mukhopadhyay, G. and Behera, H.“Graphene and some of its structural analogues: Full-potential density functional theory calculations,”World Journal of Engineering, Vol.10, No.1, 2013,pp.39-48.

“Errata: Graphene and some of its structural analogues:Full-potential density functional theory calculations,”World Journal of Engineering, Vol.10, No.2, 2013, pp.189-90.

“Emerging Two-dimensional Materials: Graphene andits other structural analogues,” arXiv:1306.0809v1[cond-mat.mtrl-sci], 2013.

Mukul, M., Jade, S., Ansari, K. and Matin, A.“Seismotectonic Implications of Strike-SlipEarthquakes in the Darjiling-Sikkim Himalaya,”Current Science, Vol. 106, February 2014, pp. 198-210.

39

Mukundan R., Jain, K. and Jha Shishir K.“Technology and intellectual property strategy of afirm: A view through the commons theory lens”, IIMBManagement Review, Volume 25, Issue 4, December2013, pp.213-227.

Muniappan, N., Hebsur, A. V., Rao, E. P. andVenkatachalam, G.“Ground penetrating radar response of some commonburied utilities encountered in engineering projects”,International Journal of s and Engineering, Vol.6, No.3,2013, pp.419-428.

Murugavel, R. and Vishnoi, P.“A flexible tri-carboxylic acid derived zinc (II) 3-D helicalmetal-organic-framework and a cadmium (II)interwoven2-D layered framework solids”, Z. Anorg. Allg. Chem.,Vol.640, 2014, p.1075 .

Naduvath, J., Shaw, S., Bhargava, P. and Mallick, S.“Effect of Nanograss and Annealing Temperature onTio2 Nanotubes Based Dye Sensitized Solar Cells”,Materials Science Forum, 771, 2014, pp. 103-113.

Nagar, L., Dutta, P. and Jain, K.“An Integrated Supply Chain Model for New Productswith Imprecise Production and Supply under ScenarioDependent Fuzzy Random Demand”, InternationalJournal of System Science, Vol. 45, No.5, 2014, pp.873-887.

Nagar, S. and Chakrabarti, S.“Effect of substrate temperature on the electrical andoptical properties of pulsed laser deposited ZnO thinfilms,” Sensor Letters,Volume 11, Number 8, August2013, pp. 1498-1503.

Nagarajan R., Venkataraman G. and Snehamani“Rule based classification of potential snow avalancheareas”, Natural Resources and Conservation,Vol.2,No.3, 2014, pp. 11-24.

Nagarajan, R.“Tank rehabilitation index for prioritization of lakesin semi-arid regions - Geospatial approach”,International Journal of Geomatics andGeosciences, Volume 3, No. 3, 2013, pp. 525-537.

Nagraj R. and Vedagiri, P.“Modeling Pedestrian Delay and Level of Service atSignalized Intersection Crosswalks under MixedTraffic Conditions,” Transportation ResearchRecord: Journal of the Transportation ResearchBoard, No. 2394, Transportation Research Board ofthe National Academies, Washington, D.C., 2013, pp.70-76.

Naik, N.K., Sirisha, M. and Inani, A.“Permeability characterization of polymer matrixcomposites by RTM / VARTM,” Progress inSciences, Vol. 65, 2014, pp. 22-40.

Naik, V.M.“Electric field induced cloudy-clear transitions inmicellar solutions of a block copolymericamphiphile,” RSC Advances, 3 (30), 2013, pp. 12341-12348.

Nair, S.N.S., Sesha Kumar, C.V. and Naik, N.K.“Ballistic impact performance of composite targets,”Materials and Design, Vol. 51, 2013, pp. 833–846.

Nairhita,S. and Chakrabarti, R.“End to end loop formation in a single polymer chainwith internal friction”, Chem. Phys. Letts. 582, 2013,p.71.

Namboothiri, I. N. N. and Gopi, E.“Synthesis of α-Tribromomethylamines via Mg-Mediated Addition of Bromoform to Imines,”Org.Biomol. Chem. 2014, Vol.12, pp.2769-2777.

Nampoothari Pramod, Gandhi Mayuri, and KulkarniAjit“Synthesis and characterization of NIR LuminescentLaF3:Ln3+ nanoparticles and their transparent EpoxyNanocomposites”, Advanced Materials ResearchJournal, Vol.748, 2013, pp. 101-105.

Nandi D.K. and Sarkar S.K.“Atomic Layer Deposition of Molybdenum Oxide forSolar Cell Application”, Applied Mechanics andMaterials, Vol. 492, 2014, pp. 375-379.

Nandi, R., Joshi Pranav, Singh Devendra, MohantaPravanshu, Srinivasa, R.S. and Major, S.S.“Structural and optical properties of ZnO nanorodsgrown ly on sputtered GaN buffer layers,” Thin SolidFilms, Vol. 555, 2014, p. 122.

Narayanam, P. K., Soni, P., Srinivasa, R.S., Talwar,S.S. and Major, S.S.“Strong and Tunable Blue Luminescence from Cd1-xZnxS Alloy Nanocrystallites Grown in Langmuir-blodgett Multilayers”, Journal of Physical C, 117(8),2013, pp.4314-4325.

Narayanan, K. and Sahu, S.K.“Carbon Dioxide Emissions from IndianManufacturing Industries: Role of Energy andTechnology Intensity”, Review of Business andEconomics Studies, Volume 1, No. 2, 2014, pp. 60-73.

“CO2 emission and firm heterogeneity: A study ofmetals and metal–based industries in India”,International Journal of Energy Technology andPolicy, Volume 9, No. 2, 2013, pp. 110-127.

Narayanan, K. and Siddharthan, N.S.“Innovation and Development,” Special Issue onInnovation and Global Competitiveness: Case of

40

India’s Manufacturing Sector, Taylor and Francis,Volume 3, Issue 2, 2013.

“Introduction to innovation and globalcompetitiveness: Case of India’s manufacturingsector”, Innovation and Development, Volume 3,2013, Issue 2, pp 145-150.

Narayanan, K. and Kannan Kalpana“Synchronous Teacher Training in India: A study ofPerceptions and Satisfaction of the Participants”, inInternational Journal of Information and EducationTechnology, Vol.5, No. 3, March 2014, pp.200 – 207.

Narayanan, K. and Singh, A.P.“Did technological intervention help to spare land fromagriculture: Evidence from post liberalisation India”,Studies in Agricultural Economics, Volume 115, No. 3,2013, pp. 166-171.

Narayanan, K. and Tupe, S.“Indian Power Sector during the Plan Period: Strategyand Gaps”, Academicia: An InternationalMultidisciplinary R arch Journal, Volume 3, No. 6,2013, pp. 85-97.

Narayanan, K., Bgchi, S. and Bhattacharyya, S.“Does Anti-dumping Enforcement Generate Threat?”,Foreign Trade Review, Volume 49, No. (1), 2014,pp. 31-44.

Narayanan, K., Vyas Vidhisha and Ramanathan, A.“Mergers and acquisitions, technological efforts andexports: A study of pharmaceutical sector in India”,Innovation and Development, Volume 3, Issue 2,2013, pp 169-186.

Narayanan, N.C.“Designed to Falter: MGNREGA Implementation inMaharashtra”, Economic and Political Weekly,Vol.XlVIII nos 26 & 27, pp. 61-66.

Naresh N., Wasim F.G.S., Ladewig B.P. andNeergat M.“Removal of surfactant and capping agent from Pdnanocubes (Pd-NCs) using tert-butylamine: Its effecton electro characteristics”, Journal of MaterialsChemistry A, Vol. 1(30), 2013, pp. 8553-8559.

Nath J. Saketha, Tal A. Ben- and Bhattacharyya C.“Robust formulations for clustering-based large-scaleclassification”, Journal of Optimization & Engg.,Vol. 14(2), pp. 225-250, June 2013.

Nath Rajakishore“Negative Aspects of Tolerance,” PhilosophyPathways electronic journal (ISSN: 2043-0728),Published by International Society for Philosophers &Philosophical Society of England, Issue 179, October2013.

Nawata Satoshi, Ramadevi, P. and Zodinmawia“Multiplicity-free quantum 6j- symbols for U q(sl N),” Lett.Math.Phys., Vol. 103, 2013, pp. 1389-1398.

“Colored HOMFLY polynomials from Chern-Simonstheory,” J. of Knot theory and its Ramifications,Vol.22, No. 13, 2013, p. 1350078, arXiv:1302.5144[hep-th].

“Colored Kauffman Homology and Super-A-polynomials,” JHEP, Vol. 01, 2014, p.126,arXiv:1310.2240 (hep-th).

Neena, I., Eldho T.I. and Gupta, I.D.“Numerical and Physical Model Studies for HydraulicFlushing of Sediment from Chamera-II R rvoir, HimachalPradesh, India”, ISH Journal of HydraulicsEngineering, Vol.20(1), 2014, pp.14-21.

Nehe, P. and Kumar Sudarshan“Methanol reformation for hydrogen production froma single channel with cavities,” International Journalof Hydrogen Energy, Vol. 38, 2013, pp.13216-13229.

Nehra, A., Hinge, V. K. and Rao, C. P.“Phenylene-diimine capped conjugate of lower rim1, 3-calix[4]arene as molecular receptor for Mg2+via arm conformational changes followed byaggregation and mimicking the species by molecularmechanics”, J. Org. Chem., Vol.79, 2014, pp. 5763 –5770.

Nelson, M., Maiti, S.K., Falzon, B.F. andGuiamatsia, I.“A comparison of stress intensity factors throughcrack closure integral and other approaches usingeXtended element-free Galerkin method,”Computational Mechanics, Vol.(52), 2013, pp.587-605.

Nene, S., Kashyap, B.P., Prabhu, N., T.Al-Samman,and Yuri Estrin“Effect of Rolling on Microstructure and RoomTemperature Tensile Properties of Newly DevelopledMg-4Li-2Ca Alloy”, Advanced Materials Research,922, 2014, pp. 537-542.

Nene, S.S., Sharma, G., Singh, R.N. and Kashyap,B.P.Microstructural Evolution in and Flow Properties ofZr-2.5Nb Pressure Tube Material at ElevatedTemperature, Journal of Nuclear Materials, 449 (1-3), 2014, pp. 62-68.

Nigam, S., Chandra, S., Newgreen, D.F. andBahadur, D.“Q Chen, Poly (Ethylene Glycol)-Modified PAMAM-Fe3O4- Doxorubicin Triads with the Potential forImproved Therapeutic Efficacy: Generation-Dependent Increased Drug Loading and Retention at

41

Neutral Ph and Increased Release at Acidic Ph,Langmuir”, 30, 2014, pp. 1004-1011.

Noronha, S. B.“Engineering whole-cell biosensors to evaluate theeffect of osmotic conditions on bacteria,” Annals ofMicrobiology, 63 (4), 2013, pp. 1283-1290.

“Co-production of two recombinant proteins inEscherichia coli using the promoter region of thedivergently expressed curli genes”, Journal ofBiotechnology, 164 (1), 2013, pp. 121-122.

Nunna H.S.V.S.K. and Doolla S.“Multiagent-Based Distributed-Energy-ResourceManagement for Intelligent Microgrids”, IEEETransactions on Industrial Electronics, Vol. 60(4), 2013,pp. 1678-1687.

“Energy Management in Microgrids Using DemandResponse and Distributed Storage—A MultiagentApproach”, IEEE Transactions on Power Delivery, Vol.99(1), 2013, pp. 1-1.

Orlicz, G.C., Balasubramanian, S. and Prestridge, K.P.“Incident shock Mach number effects on Richtmyer-Meshkov mixing in a heavy gas layer,” Physics ofFluids, Vol.(25) 11, 2013, pp.1-28.

Özdemir, V., LLerena, A., McKinnon, R.A.,Srivastava, S., et al.“Building a socio-technical GPS for globalpersonalized medicine”. Current Pharmacogenomicsand Personalized Medicine, Vol. 11, 2013, pp.87-92.

Özdemir, V., Rodriguez, A.B., Dove, E.S., Ferguson,L.R., Huzair, F., Manolopoulos, V.G., Masellis, M.,Milius, D., Warnich, L., Srivastava, S.“Public health pharmacogenomics and the designprinciples for global public goods – movinggenomics to responsible innovation”. CurrentPharmacogenomics and Personalized Medicine,Vol.11, 2013, pp.1-4.

Ozdemir, V., Srivastava, S., et al.“Crowd-funded micro-grants for genomics and ‘bigdata’: An actionable idea connecting small (artisan)science, infrastructure science, and citizenphilanthropy”. OMICS A Journal of IntegrativeBiology, Vol. 17 (4), 2013, pp. 161-172.

“Ready to put metadata on the post-2015 developmentagenda? Linking data publications to responsibleinnovation and science diplomacy”, OMICS A Journalof Integrative Biology, Vol. 18, 2014, pp. 1-9.

Pachapur, V., Kapoor, A., Jain, R., Singh, P., Renu,D., Dikshit, J.B., Srivastava, S.“Systems biology approach for the identificationof diagnostic and therapeutic targets inmedulloblastomas”. Current Pharmacogenomicsand Personalized Medicine, Vol. 11, 2013, pp.137-153.

Padade, A. H. and Mandal J. N.“Interface strength behavior of expanded polystyrene(EPS) geofoam,” International Journal ofGeotechnical Engineering, Vol.8(1), 2014, pp. 66-71.

Padekar, B.S., Singh Raman R.K., Raja, V.S. andLyon Paul“Stress Corrosion Cracking of a Recent Rare-Earthcontaining Magnesium Alloy, EV31A, and A CommonAl-Containing Alloy, AZ91E”, Corrosion Science, 71,2013, pp. 1-9.

Padekar, B.S., Raja, V.S. and Singh Raman R.K.“Stress Corrosion Cracking of a Wrought Mg-Mn Alloyunder Plane Strain and Plane Stress Conditions”,Engineering Fracture Mechanics, 102, 2013, pp. 180-193.

Padekar, B.S., Raja, V.S., Singh Raman R.K. andLyon Paul“Stress Corrosion Cracking Behavior of MagnesiumAlloys EV31A and AZ91E”, Materials Science andEngg: A 583, 2013, pp. 169-176.

Padhi, Puja and Shaikh, I.“A Simultaneous Equation Approach on the Relationshipbetween Implied, Realised and Historical Volatility,” Asia-Pacific Journal of Management Research and Innovation, Vol. 9 Issue (2), 2013, pp. 139–155, DOI :http://dx.doi.org/10.1177/2319510X13504282.

“Macroeconomic announcements and impliedvolatility index: Evidence from India VIX,” Margin:The Journal of Applied Economic Research , Vol. 7,Issue (4), 2013, pp. 417–442, DOI http://dx.doi.org/10.1177/0973801013500168 .

“On the Linkages among ex-post and ex-antevolatility: Evidence from NSE Options Market India,”Global Business Review, Vol. 14, Issue 3, 2013, pp.487-505.DOI http://dx.doi.org/10.1177/0972150913496866.

“RBI’s Monetary Policy and MacroeconomicAnnouncements: Impact on S&P CNX Nifty VIX,”Transition Studies Review, Vol. 19, Issue 4, 2013, pp445-460. DOI http://dx.doi.org/10.1007/s11300-013-0255-9.

“The information content of implied volatility index(India VIX),” Global Business Perspectives, Vol. 1,Issue 4, 2013, pp. 359–378, DOI. http://dx.doi.org/10.1007/s40196-013-0025-4.

42

“The information content of macroeconomic news”.Elsevier Procedia Economics and Finance, Vol. 5,2013, pp. 686 - 695. DOI http://dx.doi.org/10.1016/S2212-5671(13)00080-4 .

Padhi, S. S., Wagner, F., Stephan M., Niranjan, T.T., Tarikere, T. and Aggarwal, V.“A Simulation-Based Methodology to AnalyseProduction Line Disruptions,” International Journalof Production Research, Vol. 51, No. 6, 2013, pp.1885-1897.

Padhye, L. P.“Tezel U., Fate of Environmental Pollutants,” WaterEnvironment Research, Vol. 85, (10), 2013, pp.1734-1785.

Padhye, L. P., Kim, J. H. and Huang, C.H.“Oxidation of Dithiocarbamates to Yield N-Nitrosaminesby Water Disinfection Oxidants”, Water Research,Vol. 47 (2), 2013, pp. 725-736.

Padhye, L. P., Yao, H., Kung’u, F. T. and Huang, C.H.“Year-Long Evaluation on the Occurrence and Fate ofPharmaceuticals, Personal Care Products, andEndocrine Disrupting Chemicals in an Urban DrinkingWater Treatment Plant”, Water Research, Vol. 51,2014, pp. 266-276.

Paidi, S.K., Amrutha, B., Akram, M. and KumarSudarshan“Effect of N2/CO2 dilution on laminar burningvelocity of H2-air mixtures at high temperatures,”International Jornal of Hydrogen Energy, Vol. 38,2013, pp. 13812 – 1382.

Pal Debasattam, and Pillai Harish, K.“Repr ntation Formulae for Discrete 2D AutonomousSystems”, SIAM Journal of Control andOptimization, Vol. 51, No. 3, 2013, pp. 2406-2441.

“On restrictions of n-D systems to 1-D subspaces”,Multidimensional Systems and Signal Processing,Vol. 25, pp 115-144, 2014.

“Algorithms for the theory of restrictions of NDsystems to proper subspaces of Rn”, accepted inMultidimesional Systems and Signal Processing,2014.

Pal Lakhan, Gupta Sachin, Suresh, K. G. andNigam, A.K.“Effect of Cr substitution on the magnetic andmagnetic-transport properties of Fe2Mn1-xCrxSialloys,” J. Appl. Phys. Vol.115, 2014, p. 17C303.

Pal Lakhan, Suresh K. G. and Nigam A. K.“Effect of Mn substitution on the magnetic andmagneto-transport properties of Fe3-xMnxSi,” J. Appl.Phys. Vol.113, 2013, p.093904.

Pal, A. K., Maneru, D. R., Latif, I. A., Moreira, I.de. P. R., Illas, F. and Datta, S. N.“Theoretical and Computational Investigation ofMeta-Phenylene as Ferromagnetic Coupler inNitronyl Nitroxide Diradicals. Theor.”Chem. Acc.,2014, Vol. 133, pp.1472/1-12.

Pal, D. and Belur, M.N.“Nyquist plots, finite gain/phase margins anddissipativity”, Systems & Control Letters, Volume 62,no. 10, 2013, pp. 890-894.

Pal, J., Shah, V. and Banerjee, S.“Performance of Damage Detection Algorithms forHealth Monitoring of Joints in Steel Frame Structuresusing Vibration Based Techniques”, InternationalJournal of Structural Engineering, Vol.4(4), 2013, pp.346-360.

Pal, Rama“Decomposition of Income-related Inequality inEducational Performance: Evidence from India,”Journal of Quantitative Economics, Vol.11(1&2), 2013,pp. 180-198.

“Out-of-pocket Health Expenditure: Impact on theConsumption of Indian Households,” OxfordDevelopment Studies, Routledge, Vol. 41(2), 2013,pp. 258-279.

Palai, P., Prabhu, N., Hodgson, P.D. and Kashyap,B.P.“Grain Growth and ?-Mg17Al12 Intermetallic PhaseDissolution during Heat Treatment and its Impact onDeformation Behavior of AZ80 Mg-Alloy, Journalof Materials Engineering and Performance, 23 (1),2014, pp. 77-82.

Palanisami, N., Rajakannu, P. and Murugavel, R.“Non-covalently aggregated zinc and cadmiumcomplexes derived from substituted aromaticcarboxylic acids: Synthesis, spectroscopy andstructural studies” Inorg. Chim. Acta, Vol.405, 2013,pp. 522-531.

Palaparthy, V.S., Baghini, M.S. and Singh, D.N.“Review of Polymer-Based Sensors for Agriculture-Related Applications”, ICE Emerging Materials Rarch, Vol. 2(4), 2013, pp.166-180.

Paliwal, M. and Patwardhan, A.“Identification of clusters in tropical cyclone tracksof North Indian Ocean,” Natural Hazards, Vol. 68(2),2013, pp. 645-656.

Pambhar, A. and Narasimhan, K.“Prediction of Stress and Strain Based Forming LimitDiagram During Tube Hydroforming Process”,Transactions of the Indian Institute of Metals, 66(5-6), 2013, pp. 665-669.

43

Panchal V., Bhandarkar U., Neergat M. andSuresh K.G.“Controlling magnetic properties of iron oxidenanoparticles using post-synthesis thermal treatment”,Applied A, Vol. 114(2), 2014, pp. 537-544.

Panchratna, D., Sethi, V. and Mukherji, S.“Sorption of Simulated Biomass GasificationWastewater on Rice Husk Char and Activated Carbon”International Journal on EnvironmentalEngineering and Management, Vol. 4(5), 2013, pp.489-496.

Panda, R. K.“Learning from Stories: A Philosophical Perspective”,Lokaratna, Vol - V & VI, 2013, pp.31-40.

“Virtue of a Learner,” Anekanta: A Journal ofPolysemic Thought, No.2, 2014, pp.69-77.

Pandey Pratima and Venkataraman Gopalan“Changes in the glaciers of Chandra-Bhaga basin,Himachal Himalaya, India, between 1980 and 2010 usingremote sensing”, International Journal of RemoteSensing, Vol. 34, No.15, pp.5584-5597.

Pandey, A. and Gupta, R.“Stimulating Appreciative Mindset The Application ofIndian Traditional Wisdom for Effective AppreciativeInquiry-Based Interventions,” AI Practitioner, Vol. 15(10), 2013, pp. 21-24.

Pandey, V., Lavanya S. and Dusane, R.O.“Fabrication of High Gauge Factor PiezoresistiveNanocrystalline Si Film using Aluminum InducedCrystallization of HWCVD Deposited a-Si:H”.Canadian Journal of Physics, 2014.

Pant, R. S.“Design, Fabrication and Flight Demonstration of aRemotely Controlled Airship for Snow Scientists”,Journal of Technology and Management (JATM),Vol. 6, No. 1, January-March 2014, pp. 19-27.

Parija, A. and Sunoj, R. B.“Mechanism of Catalytic Functionalization of PrimaryC-H Bonds Using a Silylation Strategy” Org. Lett.,Vol.15, 2013, p.4066.

Parkhi Prasad P., Bandyopadhyay, B. and Jha, M.‘‘Roll autopilot design using second order slidingmode”, International Journal of Automation andControl, Vol. 7, No. 3, 2013, pp. 202-221.

Parle, D., Singh, R. and Joshi S. S.“Modeling of Microcrack Formation in OrthogonalMachining,” International Journal of Machine Tools& Manufacture, Vol.(81), No. 82, 2014, pp.18-29.

Parmar, J.J., Marko, J.F. and Padinhateeri, R.“Nucleosome positioning and kinetics neartranscription-start-site barriers are controlled by

interplay between active remodeling and DNAsequence”. Nucleic Acids Res., Vol. 42(1), 128-36,2014, doi: 10.1093/nar/gkt854. Epub 2013,September 2013.

Parthasarathy, D.“Global flows or rural-urban connections? Temporality,public spaces and heterotopias in globalising Mumbai”,ZMO Working Paper Series No.9, Zentrum ModernerOrient, Berlin, 2014.

Patel, S.C., Khalkho, R., Patel, S.K., Sheikh, J.M.,Behera, D., Chaudhari, S. and Prabhakar, N.“Fluoride contamination of groundwater in parts ofeastern India and a preliminary experimental study offluoride adsorption by natural haematite iron ore andsynthetic magnetite,” Environ., Vol., March 2014, pp.DOI 10.1007/s12665-014-3112-1.

Patkar Saket, Chaudhuri Parag“Wetting of Porous Solids”, IEEE Transactions onVisualization Computer Graphics, Volume 19(9), pp.1592-1604, 2013.

Pathak Sudhir N., Jabeen Zahera, Das Dibyenduand Rajesh, R.“Energy decay in Three-dimensional freely coolinggranular gas,” Phys. Rev. Lett. Vol.112, 2014, p. 038001.

Pathak, P., Singh, D. N., Pandit, G.G. Pandit andApte, P. R.“Establishing Sensitivity of Distribution Coefficienton Various Attributes of Soil-contaminant System”,Journal of Hazardous, Toxic and Radioactive Waste,ASCE, Vol.18(1), 2014, pp. 64-75.

Pathak, R.K. and Dikshit A.K.“Screening of Bacterial Biosorbents for Removal ofAtrazine,” Clean Technology and EnvironmentalPolicy, Vol.15 (6), pp. 921:929.

Pathari, V. and Sonar, R.M.“Deriving an information security assurance indicatorat the organizational level”, InformationManagement and Computer Security, Vol. 21(5),2013, pp. 401-419.

Patil Magar H.R. and Jangid, R.S.“Seismic vulnerability assessment of steel momentresisting frame due to infill masonry walls, variationin column size and horizontal buckling restrainedbraces”, ACEE International Journal on Civil andEnvironmental Engineering, Vol. 2, 2013, pp. 20-27.

Patil, R.S., Kumar, R., Menon, R., Shah, M.K. andSethi, V.“Development of particulate matter speciationprofiles for major sources in six cities in India”,Atmospheric Research, Vol.132–133, 2013, pp.1-11.

44

Patil, S., Cherukupalli, R., Pramod, M.R., More,S., Mahamuni, S., Jadkar, S.R. and Dusane, R.O.,Dharmadhikari, C.V. and Ghaisas, S.V.“Passivation of n-type Emitter, p-type Base inSolar Cells Via Oxygen Terminated SiliconNanoparticles”, Progress in Photovoltaics: Researchand Applications. 21, 1146, 2013.

Patil, S.B., Jena, A.K. and Bhargava, P.“Examining Impact of Particle DeagglomerationTechniques on Microstructure and Properties of OxideMaterials through Nanoindentation”, Solid Mechanicsand its Applications, 203, 2014, pp. 231-250.

Patil,K., Deo, M.C., Ghosh Subimal and Ravichandran,M.“Predicting Sea Surface Temperatures in the NorthIndian Ocean with Nonlinear Autoregressive NeuralNetworks,” International Journal of Oceanography,2013, Article ID 302479, http://dx.doi.org/10.1155/2013/302479

Patra T., Agasti S, Modak A. and Maiti D. “Nickel-Catalyzed Hydrogenolysis of UnactivatedCarbon-Cyano Bonds.” Chem. Commun. 2013, Vol.49,pp.8362-8364.

Patra, A., Debgupta, J., Mandal, S., Kalita, H.,Aslam, M. and Vijayamohanan, K.“Photophysical and Photoconductivity Properties ofThiol Functionalized Graphene-CdSe QD Composites,”RSC Adv, Vol.4, 2014, pp.13788-13795.

Patra, T. Deb, A. Manna, S. Sharma U. and Maiti,D.“Iron-Mediated Decarboxylative Trifluoromethylationof α,β-Unsaturated Carboxylic Acids withTrifluoromethanesulfinate.” Eur. J. Org. Chem,Vol.24, 2013, p. 5257.

Patra, T., Agasti, S., Akanksha and Maiti, D.“Nickel-catalyzed decyanation of inert carbon-cyanobonds.” Chem. Commun., Vol.49, 2013, p. 69.

Patra, T., Agasti, S., Modak, A. and Maiti, D.“Nickel-Catalyzed Hydrogenolysis of UnactivatedCarbon-Cyano Bonds.” Chem. Commun., Vol.49,2013, pp.8362-8364.

Patra, T., Deb, A., Manna, S., Sharma U. and Maiti,D.“Iron-Mediated Decarboxylative Trifluoromethylation ofα,β-Unsaturated Carboxylic Acids with Trifluoro-methanesulfinate.” Eur. J. Org. Chem, 2013, Vol.24, p.5257.

Pattanaik Sarmistha and Sen Amrita“Current Rehabilitation Status over the Issues ofDisplacement at Sanjay Gandhi National Park,Mumbai: Some Observations,” The Journal ofPolitical Studies.

Patwardhan, S.“A unified framework for fault detection and isolationof sensor and actuator biases in linear time invariantsystems using marginalized likelihood ratio test withuniform priors” Journal of Process Control, 23 (9),2013, pp. 1350-1361.

“Robust stability of nonlinear model predictive controlwith extended Kalman filter and target setting”,International Journal of Robust and NonlinearControl, 23 (11), 2013, pp. 1240-1264.

Patwardhan, S.C. and Mahajani, S.M.“DAE-EKF-based nonlinear predictive control ofreactive distillation systems exhibiting input andoutput multiplicities,” Industrial and EngineeringResearch, 52 (38), 2013, pp. 13699-13716.

Paul S. and Singh S.“A density variant flux model for density waveoscillations”, International Journal of Heat and MassTransfer, Vol. 69, 2014, pp. 151-163.

Pedersen, K. S., Lorusso, G., Morales, J. J.,Weyhermüller, T., Piligkos, S., Singh, S. K.,Larsen,D., Schau-Magnussen, M., Rajaraman, G.,Evangelisti, M., and Bendix, J.“Fluoride-Bridged {GdIII

3MIII

2} (M=Cr, Fe, Ga)Molecular Magnetic Refrigerants” Angew. Chem. Int.Ed., Vol. 53, pp.2394–2397.

Pellegrin, M., Aguinaldo, J., Arabi, S., Sadler, M.,Min, K., Liu, M., Salamon, C., Greiner, A.,Diamond, J., McCandless, R., Owerdieck, C.,Wert, J. and Padhye, L. P.“Membrane Processes,” Water EnvironmentResearch, Vol. 85, (10), 2013, pp. 1092-1175.

Petla R.K. and Mitra S.“Nickel Ferrite as Stable, High Capacity and High rateAnode for Li-ion Battery Applications”, RSCAdvances, Vol. 3, 2013, pp. 25058-25064.

Phanikanth,V.S., Choudhury Deepankar andReddy, G.R.“Behaviour of single pile in liquefied deposits duringearthquakes”, International Journal of Geomechanics,ASCE, (ISSN: 1532-3641) USA, Vol. 13, No. 4, 2013, pp.454-462.

Pisal Alka Y. and Jangid, R.S.“Dynamic characteristics of structures with tunedmass friction dampers”, International Journal ofStructural and Engineering Research, Vol. 2, 2013,pp. 17-31.

“Seismic response of multi-story structure with semi-active multiple tuned mass friction dampers”,International Journal of ComputationalEngineering Research, Vol. 3, 2013, pp. 53-72.

45

Poojari, R., Srivastava, R.“Composite alginate microspheres as the nextgeneration egg-box carriers for biomacromoleculesdelivery”, Expert Opinion on Drug Delivery, Vol.10(8), pp. 1061-1076, (IF 4.869), 2013.

Pothiraja, R., Rajakannu,P., Vishnoi,P., Butcher, R.J. and Murugavel, R.“Polymeric and cyclic mangan phosphates andphosphinates: Synthesis, spectral characterization andsolid-state structures,” Inorg. Chim. Acta, Vol. 414,2014, pp.264-273.

Pradeepkumar, P. I., Kumar, V., Gore, K. R. andKesavan, V.Design, Synthesis, Biophysical and Primer ExtensionStudies of Novel Acyclic Butyl Nucleic Acid.” Org.Biomol. Chem,Vol.11, September 2013, pp 5853-5865

Pradhan, S.P., Vishal, V., Singh, T.N. and Singh, V.K.“Optimisation of Dump Slope Geometry Vis-à-visFlyash Utilisation Using Numerical Simulation,”American Journal of Mining and Metallurgy, Vol. 2(1), 2014, pp. 1-7.

Prakash, A. and Bahadur, D.“The Role of Ionic Electrolytes on CapacitivePerformance of ZnO-2 Reduced Graphene OxideNanohybrids with Thermally Tunable Morphologies”,ACS Applied Material Interface, 6, 2014, pp. 1394-1405.

Prakash, A., Misra, S.K. and Bahadur, D.“Role of Reduced Graphene Oxide Capping on DefectInduced Ferromagnetism of ZnO anorods”,Nanotechnology, 24, 2013, 095705.

Prakash, A., Singh, N.S. and Bahadur, D.“The Photo-Electro Studies of Eu3+doped Yttrium,Orthovanadate-zinc Oxide-reduced Grapheme OxideNanohybrid”, Material and Chemistry and Physics,144, 2014, pp. 529-537.

Prasad Kaushal, Agrawal Amit and Sharma Atul“Poiseuille Flow across an Eccentrically-ConfinedStationary/Rotating Cylinder,” Ocean Engineering,Vol.(73), 2013, pp.41-54.

Praveen Kumar, K.A. and Mohan, G.“Crustal velocity structure beneath Saurashtra, NWIndia, through waveform modeling: Implications formagmatic underplating”, Journal Asian EarthSciences, Vol. 79, January 2014, pp. 173-181.

Prestridge, K.P., Orlicz, G.C., Balasubramanian,S. and Balakumar, B.J.“Experiments of the Richtmyer Meshkov instability,”Philosophical Transactions of the Royal Society A:Mathematical, Physical and Engineering Sciences,Vol.(371), 2013, pp.1-9.

Priyadarshan, H., and Pillai Harish, K.“Reorientation of Linear Switched Systems usingState Feedback”, Automatica, Vol 49, issue. 6, 2013,pp. 1672-1682.

Puppala, G., Moitra, A., Sathyanarayanan, S., Kaul,R., Sasikala, G., Prasad, R.C., and Kukreja, L.M.“Evaluation of Fracture Toughness and ImpactToughness of Laser Rapid Manufactured Inconel-625Structures and their Co-relation”, Materials andDesign, 59, 2014, pp.509-515.

Puri, K. and Ramachandran, P.“A comparison of SPH schemes for the compressibleEuler equations”, Journal of Computational , Volume256, January 1, 2014, pp 308-333.

Pustode, M.D., Raja, V.S. and Paulose, N.“The Stress-Corrosion Cracking Susceptibility of Near-Alpha Titanium Alloy IMI 834 in Pr nce of Hot Salt”,Corrosion Science, 82, 2014, pp.191-196.

Puthenpurakal Tony J.“On the finite generation of a family of Ext modules,”Pacific J. Math. Vol.266, No.2, 2013, pp. 367–389.

Pyne Tarapada, Baul Utpal and Jangid, R.S.“Developing an instrument to understand impact ofknowledge management on equipment reliability”,International Journal of Scientific and ResearchPublications, Vol. 3, pp. 1-13, 2013.

Ragettli MS, Corradi E, Braun-Fahrländer C,Schindler C, de Nazelle A, Jerrett M, Ducret-StichRE, Künzli, N, and Phuleria HC.“Commuter exposure to ultrafine particles in differenturban locations, transportation modes and routes,”Atmospheric Environment, Vol.77, 2013, pp.376-384.

Rahul R., Singh R. K. and Neergat M.“Effect of oxidative heat-treatment on electroproperties and oxygen reduction reaction (ORR)activity of Pd–Co alloy catalysts”, Journal ofElectroanalytical , Vol. 712, 2014, pp. 223-229.

Rai D.K.R., Sutar D.S., Solanki C.S., BalasubramaniamK.R.“Ultra Thin SiNX on a-Si In Situ Hot-Wire CVD byDecomposing NH3 Gas”, Advanced MaterialsResearch, Vol. 894, 2014, pp. 421-426.

Rai, A.; Gupta, T.K.; Kini, S.; Kunwar, A.; Surolia,A.; Panda, D.“CXI-benzo-84 reversibly binds to tubulin atcolchicine site and induces apoptosis in cancer cells”,Biochem Pharmacol., Vol. 86, 2013, pp. 378-391.

Raithatha, M. and Varadraj, B.“A Panel Data Analysis of Corporate Attributes andStock Prices for Indian Manufacturing Sector”,Journal of Modern Accounting and Auditin,Vol. 9,No. 11, 2013, pp.1519-1525.

46

“Corporate Disclosures in Financial Statements andits Determinants: An Empirical Study”, The journal,Academy of Taiwan Business Management Review,2013, Vol. 9, No 2.

Raja, V.S. and Padekar, B.S.“Role of Chlorides on Pitting and HydrogenEmbrittlement of Mg-Mn Wrought Alloy”, CorrosionScience, 75, 2013, pp. 176-183.

Rajabian., A, Ghiassian, H. and Viswanadham, B.V.S.“Centrifuge Study of Anchored Geosynthetic Slopes,”Geosynthetics International, Vol. 20, No. 3, 2013, pp.191-206.

Rajaraman G., and Ansari, A.“Ortho-Hydroxylation of Aromatic Acids by a non-heme FeV=O species: How important is the liganddesign?” Phys. Chem. Chem. Phys., 2014, DOI:10.1039/C3CP55430A

Rajaraman, G., Siwatch, R., Yadav, D., Mukherjee,G., Rajaraman, G. and Nagendran, S.“Are Ligand Stabilized Carboxylic Acid Derivativeswith Ge=Te Bonds Isolable?” Inorg. Chem. 2014 DOI:10.1021/ic500116f

Rajaraman,G. and Ansari, A.“Data Set for Modelling Reaction Mechanisms UsingDensity Functional Theory: Mechanism of Ortho-hydroxylation by High-valent Iron-oxo Species”,Dataset Papers, 2013. http://www.hindawi.com/journals/dpis/aip/753131/

Rajarathinam S., Mitra S. and Petla R.K.“Li2MnO3 Rich-LiMn0.33Ni0.33Co0.33O2 integratednano-composites as High Energy Density Lithium-ionBattery Cathode Materials”, Electrochimica Acta, Vol.108, 2013, 108, pp. 135-144.

Rajeev Gupta, Krithi Ramamritham, Mukesh K.Mohania“Ratio Threshold Queries over Distributed DataSources”, PVLDB, Vol. 6(8), pp. 565-576, 2013.

Rajendran Ramkumar, Iyer Sridhar, MurthySahana, Campbell Wilson and Judithe Sheard“A Theory-Driven Approach to Predict Frustration inan ITS,” IEEE Transactions on LearningTechnologies, Vol. 6 (4), 2013, pp. 378-388.

Rajendran, B., Liu,Y., Seo, J., Gopalakrishnan, K.,Chang, L.,Friedman, D., and Ritter, M.,Mandapati, R., Borkar, A., Srinivasan, V. S. S.,Bafna, P., Karkare, P., Lodha, S., Rajendran, B.and Ganguly, U.“Specifications of Nanoscale Devices & Circuits forNeuromorphic Computational Systems,” IEEETransactions on Electron Devices, Volume: 60, Issue:1, January 2013.

Rajesh, S. and Viswanadham, B.V.S.“Centrifuge and Numerical Study on the Behaviourof Clay-Based Landfill Covers Subjected toDifferential Settlements,” Journal of HazardousToxic, and Radioactive Waste, ASCE, Vol. 16, No. 4,2013, pp. 284-297.

Rajkumar S., Choudhari R.S., Chowdhury A. andNamboothiri I.N.N.“Synthesis and pyrolysis studies of bis(nitratomethyl)-1, 3-bishomocubane - A high-energy high-densityliquid,” Thermochimica Acta, Vol.(563), 2013, pp.38-45.

Rajpathak Bhooshan, Pillai Harish K.,Bandhyopadhyay Santanu“Analysis of 1-D piecewise smooth discontinousmap”, Chaotic Modeling and Simulation (CMSIM)2, 2013, pp. 257-264.

Rajwade Ajit, Kittle David S., Tsai Tsung-Han,Brady David J., Carin Lawrence“Coded Hyperspectral Imaging and BlindCompressive Sensing”, SIAM J. Imaging Sciences,Vol. 6(2), pp.782-812, 2013.

Rak Vinay, C. and Prabhu, S.V.“Measurement of Surface Temperature and Emissivityof different materials by Two-Colour Pyrometry,”Review of Scientific Instruments, Vol.124903, 2013,pp.1-10.

Rakesh, R., Kohli, D., Sinha, V.P., Prasad, G.J. andSamajdar, I.“Fabrication of Simulated Plate Fuel Elements:Defining Role of Out-of-plane Residual Shear Stress”,J. Nucl. Mater., 445, 2014, pp. 200-208.

Ramakrishnan, D.“Spectral Discrimination of Recent sediments aroundBhuj, India using Landsat-TM data and assessment oftheir vulnerability to seismicity related failures,”Natural Hazards, Vol.70, 2014, pp.485-499.

Ramakrishnan, D., Bharti, R. and Das, M.“Reply to Comment on “A technique for estimationof suspended sediment concentration in very highturbid coastal waters: An investigation from Gulf ofCambay, India,” Marine Geology, Vol. 351, 2014,pp.109-111.

Ramakrishnan, D., Rishikesh Bharti and Das, M.“A technique for estimation of suspended sedimentconcentration in very high turbid coastal waters: Aninvestigation from Gulf of Cambay, India,” MarineGeology, Vol.346, 2013, 256-261.

Ramakrishnan, D., Singh, T.N., Verma, A. K.,Gulati, A. and Tiwari, K.C.“Soft computing and GIS for landslide susceptibilityassessment in Tawaghat area, Kumaon Himalaya,India,” Natural Hazards, Vol. 65(1), 2013, pp. 315-330.

47

Ramakrishnan,D. Rishikesh Bharti, Singh,K.D.and Nithya, M.“Thermal Inertia Mapping and its Application inMineral Exploration: Results from Mamandur PolyMetal Prospect, India,” Geophysical JournalInternational, Vol.195(1), 2013, pp.357-368.

Ramarao, B.V., Sonala, S., Mishra, J.K., Pande, M.,Singh, P., Kumar, G., Mukherjee, J. M.“Development of 3 kW 325 MHz Solid-state RF PowerAmplifier Using Four Power Amplifier Modules”,Nuclear Instruments and Methods in Rearch SectionA: Accelerators, Spectrometers, Detectors andAssociated Equipment, Volume 735, January 2014, pp.283–290, Elsevier.

Ramkumar Rajendran, Sridhar Iyer, Sahana Murthy,Campbell Wilson and Judithe Sheard.“A theory-driven approach to predict frustration”, inan ITS. IEEE Transactions on LearningTechnologies, Vol.6(4), pp.378-388, October -December 2013.

Rana Arun, Bengtsson Lars, Olsson, J. andJothiprakash, V.“Development of IDF-Curves for Tropical India byRandom Cascade Modeling,” Hydrology and EarthSystem Sciences (EGU), Vol. 10, 2013, pp. 4709-4738.

Rana, S., Haque, R., Santosh, G. and Maiti, D.“Decarbonylative halogenation by a vanadiumcomplex.” Inorg. Chem. 2013, Vol.52, p.2927.

Rane, M. V. and Mehta, J.R.“Liquid Desiccant based Solar Air ConditioningSystem with novel Evacuated Tube Collector,”Procedia Engineering, Vol.(51), 2013, pp.688-693.

Rane, M. V. and Sarangi, R.K.“Experimental Investigation for Startup and MaximumHeat Load of Closed Loop Pulsating Heat Pipe,”

Rangari Sunil M., Choudhury Deepankar andDewaikar, D.M.“Seismic uplift capacity of shallow horizontal stripanchor under oblique load using pseudo-dynamicapproach”, Soils and Foundations, (ISSN: 0038-0806, Impact Factor: 0.413/2012) Elsevier, Japan,Vol. 53, No. 5, 2013, pp. 692-707.

“Estimation of seismic uplift capacity of horizontalstrip anchors using pseudo-dynamic approach”, KSCEJournal of Engineering, (ISSN: 1226-7988, ImpactFactor: 0.383/2012) Springer, Korea, Vol. 17, No. 5,2013, pp. 989-1000.

Ranjan, R., Banerjee, S., Singh, R. K. and Banerji,P.“Local Impact Effects on Concrete Target due toMissile: An Empirical and Numerical Approach”,Annals of Nuclear Energy, Vol.68, 2014, pp. 262-275.

Rao Mallikarjuna, K.S. and Shaiju, A.J.“Some Remarks on Evolutionary Stability in MatrixGames”, International Game Theory Review, August2013, pp. 1340024.

Rao Mallikarjuna, K.S.“Nonzero-sum games as distributed games”, Studiesin Microeconomics, Vol. 2, Issue 1, 2014, pp. 27-34.

Rao, A.A., Patkaria, M., Reddy, P.J., Srivastava, R.,Srikanth, R., Mehra, S., Srivastava, S.“Proteomic analysis of Streptomyces coelicolor inresponse to ciprofloxacin challenge”. Journal ofProteomics, S1874-3919(13)00454-5, 2013.

Rao, A.G., Katkar, V.A, Gunasekaran, G.,Deshmukh,V.P., Prabhu, N. and Kashyap, B.P.“Effect of Multipass Friction Stir Processing onCorrosion Resistance of Hypereutectic Al-30SiAlloy”, Corrosion Science, 83, 2014, pp. 198-208.

Rao, A.G., Ravi, K.R., Ramakrishnarao, B.,Deshmukh, V.P., Sharma, A., Prabhu, N. andKashyap, B.P.“Recrystallization Phenomena during Friction StirProcessing of Hypereutectic Aluminum-siliconAlloy”, Metallurgical and Materials TransactionsA: Physical Metallurgy and Materials Science,44(3), 2013, pp. 1519-1529.

Rao, B.“Application of AHP tool for decision making ofchoice of technology for extraction of anti-cancerbioactive compounds of plant origin” InternationalJournal of Analytic Hierarchy Process, 5(1), 2013,pp.3-29.

Rao, G.S. and Radhakrishna, M.“Crustal structure and nature of emplacement of the85°E Ridge in the Mahanadi offshore based onconstrained potential field modeling: Implications forintraplate plume emplaced volcanism,” Journal ofAsian Earth Sciences, Vol.85, 2014, pp. 80-96.

Rao, S., Mague, J. T. and Balakrishna, M. S.“Synthesis, transition metal and catalytic reactions offerrocenylbis(phosphonite),” [Fe{C5H4P(OC6H3(OMe-o)(C3H5-p))2}2], Dalton Trans. 2013, Vol.42, pp.11698-11708.

Rathod, W.S., Khanna, A.S., Karthikeyan, J. andRathod, R.C.“Effect of N2 and He Carrier Gases on Oxidation

48

Behavior of Cold Sprayed CoNiCrAlY Powder toDeposit Bond Coats”, Transactions of the IndianInstitute of Metals, pp. 1-16.

“Oxidation Behaviour of CoNiCrAlY Bond CoatsProduced by High Velocity Oxy-Fuel and Cold GasDynamic Sprayed Nitrogen Gas, American Int. Jour.of Rearch in Science & Techno. Engg. &Mathamatics, 2013, pp. 29-34.

Ravikumar, G., Pradeep, Y. and Khaparde, S.A.“Graphics Model for Power Systems Using Layoutsand Relative Coordinates in CIM Framework “, IEEETransactions on Power Systems, Volume: 28 , Issue. 4,2013, pp. 3906 – 3915.

Ray R., Chowdhury Dutta, A. and Maiti, D. andLahiri, G. K.“Iron catalysed nitrosation of olefins tooximes.”Dalton Trans. 2014, Vol.43, p.38.

Ray, R., Chowdhury, A. D. and Lahiri, G. K.“An Efficient Iron-Catalyzed Acetal Formation fromStyrene Derivatives” Chem Cat Chem. Vol.5, 2013,pp. 2158-2161.

Ray, S., Moiyadi, A., Srivastava, S.“Biorepositories in promoting cancer r arch indeveloping countries”, Nature Reviews ClinicalOncology, Vol. 10, 2014, pp. 434-438.

Raykar, N.R., Maiti, S.K., Singh Raman, R.K. andAryan, S.“Study of hydrogen concentration dependent growthof external annular crack in round tensile specimenusing cohesive zone model,” Engineering FractureMechanics, Vol.(106), 2013, pp.49-66.

Razak, R.A., Bhushan, M., Belur, M.N., Tiwari,A.P., Kelkar, M.G., and Pramanik, M.,“Clustering of Self Powered Neutron Detectors:Combining Prompt and Slow Dynamics”, accepted forpublication in IEEE Transactions on Nuclear Science,2014.

Reddy V. Mahendra, Sudheer, S., Prabhu, S.V. andSudarshan Kumar“Design and calibration of a new compactradiativeheat-flux gauge (RHFG) for combustionapplications,” Sensors and Actuators A, Vol.(203),2013, pp.62-68.

Reddy, D.S.K., Saikia, B. and Sinha, K.“Effect of high-enthalpy air on stagnation point heatflux,” Journal of Thermo-physics and Heat Transfer,Vol. 28 2, 2014, pp.356-359.

Reddy, G. S., Chittora, A., Kharche, S., Mishra, S.K., and Mukherjee, J.“Bluetooth/UWB dual-band planar diversity antenna

with WiMAX and WLAN band-notch characteristics,”Progress In Electromagnetics Rearch B, Vol. 54, 303-319, 2013.

Reddy, P.J., Rao, A.A, Malhotra, D., Sharma, S.,Kumar, R., Jain, R., Gollapalli, K., Pendharkar,N., Srikanth, R., Srivastava, S.“A simple protein extraction method for proteomicanalysis of diverse samples”. Current Proteomics,S1874-3919 (13) 00454-5, 2013.

Reddy, V.M., Biswas,P., Garg,P. and Kumar Sudarshan“Combustion characteristics of biodi l fuel in highrecirculation conditions,” Fuel Processing Technology,Vol. 118, 2014, pp.310-317.

Reddy, V.M., Sudheer, S., Prabhu, S.V. andKumar Sudarshan“Design and calibration of a new compact radiativeheat-flux gauge (RHFG) for combustionapplications,” Sensors and Actuators – A: Physical,Vol. 203, 2013, pp.62-68.

Rengan, A., Banerjee, R., Kundu, G. and Srivastava,R.“An In-Vitro Analysis of Gold Nanocages forPhotothermal Therapy of Highly Tumorigenic BreastCancer Cells”, accepted in Particle and ParticleSystem Characterization, ppsc201300173R1, August2013. (IF 0.85)

Rengan, A., Jagtap, M., De, A., Banerjee, R. andSrivastava, R.“Multifunctional gold coated thermo-sensitiveliposomes for multimodal imaging and photo-thermaltherapy of breast cancer cells”, Nanoscale, 6(2), 916-923, 2013 (IF 6.23)

Rhode, S., Kain, K., Raja, V.S. and Abraham, G.J.“Factors Affecting Corrosion Behaviour of InclusionContaining Stainless Steels: A Scanning ElectroMicroscopic Study”, Materials Characterization,77, 2013, pp. 109-115.

Rhode, S.K., Horton, M.K., Kappers, M.J., Zhang,S., Humphreys, C.J., Dusane, R.O., Sahonta, S.L.and Moram, M.A.“Mg Doping Affects Dislocation Core Structures inGaN”. Physical Review Letters. 111, 025502 1, 2013.

Rishikesh Bharti, Ramakrishnan, D. and Singh,K.D.“Compositional Diversity of Naonobu Crater Area:Inferences from Chandrayaan-1 Moon MineralogyMapper (M3) Data,” Journal of Earth SystemSciences, Vol. 123(1), 2014, pp. 233-246.

Rojers, P.J. and Jha, K.“The Dichotomy between Firm Motive and Market

49

Need in University Press Publishing: Evidence fromthe Indian College Textbook Market”, The EmpiricalEconomics Letters, Vol. 12 (9), September 2013.

Rotte, V.M. and Viswanadham, B.V.S.“Influence of Nail Inclination and Facing Material Typeon the Performance of Soil-Nailed Slopes subjected toseepage,” Ground Improvement Journal, Vol.166 (GI2),2013, pp.86-102.

Rout, S. and Senthil Kumar, M.“Study of structure, microstructure and giantmagnetoresistance in nanogranular FeCuAg thinfilms with wide concentration range,” J. Alloys &Compounds, Vol.563, 2013, pp.197-202.

Roy, R.N., Kumar Sudarshan and Sreedhara, S.“A new approach to model turbulent lifted CH4/airflame issuing in a vitiated coflow using conditionalmoment closure coupled with an extinction model,”Combustion and Flame, Vol. 161, 2014, pp. 197-209.

Sabnis Sanjeev and Kale, B. K.“Estimation of Parameters of a Mixture DistributionUsing Quantile Functions,” Model Assisted Statisticsand Applications, Vol. 9, No. 2, 2014, pp. 109-119.

Sachan, R., Chavan, U., Srivastava, R.“Glucose Sensing using Near-Infrared Dyes inNanoengineered Alginate Microspheres”, Sensors,Vol. 3, 2013, p. 11, (IF 3.22).

Sadhu Sudipta, Gandhi Mayuri and SrivastavaSanjeeva“Review Article- Nanophosphor Labels for Proteomicsapplication, Proteomics” (communicated)

“Y2O3:Gd, Eu nanophosphor labels for proteinmicroarrays, Bio analytical”, (communicated)

Saha, S.K. and Dutta, P.“Role of melt convection on optimization of PCM-based heat sink under cyclic heat load,” Heat TransferEngineering,Vol.(34), 2013, pp.950-958.

Sahoo L., Bandyopadhyay S. and Banerjee R.“Benchmarking energy consumption for dump trucksin mines”, Applied Energy, Vol. 113, 2014, pp. 1382-1396.

Sahoo Roshnee, Raj Kumar D.M., Babu ArvindhaD., Suresh K.G.,

Nigam A.K.

and Manivel Raja M.

“Effect of annealing on the magnetic, magnetocaloricand magnetoresistance properties of Ni-Co-Mn-Sbmelt spun ribbons,” J. Magn. Magn. Mater. Vol.347,2013, p. 95.

Sahoo, N.K., Prakash, A. and Bahadur, D.“Role of Different Platinum Precursors on theFormation and Reaction Mechanism of Fept

Nanoparticles and Their Electrocatalytic Performancetowards Methanol Oxidation”, Dalton Transactions,43, 2014, pp. 4892-4900.

Sahoo, P.K., Panda, H.S. and Bahadur, D.“Studies on the Stability and Kinetics of Drug Releaseof Dexamethasone Phosphate Intercalated LayeredDouble Hydroxides Nanohybrids”, MaterialsChemistry & Physics , 142, 1, 2013, pp. 106-112.

Sahoo, P.K., Panigrahy, B., Dan Li and Bahadur,D.“Magnetic Behavior of Reduced Graphene Oxide/Metal Nanocomposites”, Journal of Applied Physics,113,17B 525, 2013.

Sahoo, P.K., Panigrahy, B., Sahoo, S., Satpati, A.K.,Dan Li, and Bahadur, D.“In Situ Synthesis and Properties of Reduced GrapheneOxide /Bi Nanocomposites: As an ElectroactiveMaterial for Analysis of Heavy Metals”, Biosensorsand Bioelectronics, 43, 2013, pp. 293–296.

Sahoo, R., Raj Kumar D.M., Babu D. A., Suresh K.G.,

Nigam, A.K.

and Raja M.M.

“In-plane and out of plane magnetic properties inNi46Co4Mn38Sb12 Heusler alloy ribbons,” J. Appl.Phys. Vol.113, 2013, p. 17A940.

Sahoo, S.R. and Banavar, R. N.“Attitude synchronization of satellites with internalactuation”, European Journal of Control, Elsevier,Vol. 20, 2014, pp. 152-161.

Sahu, B.N., Sahoo, S.C., Venkataramani, N., Prasad,S., Krishnan, R., Kostylev, M., and Stamps, R.L.“Magnetic and FMR Study on CoFe2O4/ZnFe2O4Bilayers”, IEEE Transactions on Magnetics,49(7),Art. No.6559103, 2013, pp. 4200-4203.

Sahu, N.K. and Bahadur, D.“Influence of Excess Fe Accumulation over the Surfaceof FePt Nanoparticles: Structural and MagneticProperties”, Journal of Applied , 113, 134303, 2013.

Saini, S.“Role of extracellular cues to trigger the metabolic phaseshifting from acidogenesis to solventogenesis inClostridium acetobutylicum,” BioresourceTechnology, 138, 2013, pp. 55-62.

Role of feedback and network architecture incontrolling virulence gene expression in Bordetella,”Molecular BioSystems, 9 (11), 2013, pp. 2635-2644.

Salunkhe T.V. and Mandal J.N.“Behaviour of fly ash at different mix ratios withPlastic Recycled Polymers,” International journalfor R arch in Applied Science and EngineeringTechnology, Vol.2 Issue III, ISSN:2321-9653, 2014,pp. 190-198.

50

Samanta, S., Das, S., Chakrabarti, D., Samajdar, I.,Singh, S.B., and Haldar, A.“Development of Multiphase Microstructure withBainite, Martensite, and Retained Austenite in A Co-Containing Steel through Quenching and Partitioning(Q&P) Treatment”, Metallurgical and MaterialsTransactions A: Physical Metallurgy and MaterialsScience, 44(13), 2013, pp.5653-5664.

Sanjram, P.K. and Gupta, M.“Task Difficulty and Time Constraint in ProgrammerMultitasking,” International Journal of GreenComputing, Vol. 4 (1), 2013, pp. 35-57.

Sant Saurabh, Lodha Saurabh, Ganguly Udayan,Mahapatra Souvik, Ganguly Swaroop, Moroz Victor,Smith Lee and Heinz Frederick“Calculations of band gap bowing and band offsets inrelaxed and strained Si1-xGex alloys by employing anew nonlinear interpolation scheme”, Journal ofApplied , Vol. 113, January 2013, pp. 033708.

Sanz, S., Frost, J. M., Rajeshkumar, T., Dalgarno,S. J., Rajaraman, G., Wernsdorfer, W., Schnack,J., Lusby P. J. and Brechin, E. K.“Combining Complementary Ligands into oneFramework for the Construction of aFerromagnetically Coupled [MnIII

12] Wheel,” - AEuropean Journal, 2014, 20, 3010–3013.

Saraswati, P.K., Khanolkar, S., Raju, D.S.N., Dutta,S. and Banerjee, S.“Foraminiferal biostratigraphy of lignite mines ofKutch, India: Age of lignite and fossil vertebrates,”Journal of Palaeogeography, Vol.3, No.1, 2014, pp.90-98.

Saravanan, P., Raja, V.S. and Mukherjee, S.“Effect of Alloyed Molybdenum on Corrosion Behaviorof Plasma Immersion Nitrogen Ion ImplantedAustenitic Stainless Steel”, Corrosion Science, 74,2013, pp. 106-115.

Sardeshpande V., Gaitonde U.N. and Banerjee R.“Methodology for indirect determination of air and flue-gas leakage in a typical glass furnace in India”, GlassTechnology-European Journal of Glass Science andTechnology Part A, Vol. 54(6), 2013, pp. 233-241.

Sardeshpande, V.“Methodology for indirect determination of air andflue-gas leakage in a typical glass furnace in India”,Glass Technology, June-2013.

Sarkar Partha, S., Agrawal Ashish, KashyapYogesh, Shukla Mayank, Sinha Amar, KumarLokendra, Manjunath, B.S., Prabhu, S. V. andMarkandeya, S.G.“Visualization of Lead melting and solidification usingNeutron radiography,” International Journal of

Nuclear Energy Science and Engineering, Vol.(3),2013, pp.7-14.

Sarkar S. and Mitra S.“Morphology controlled synthesis of layeredNH4V4O10 and the impact of binder on stable highrate electro performance”, Electrochimica Acta, Vol.132, 2014, pp. 448–456.

Sarkar S., Bhowmik A., Bharadwaj M.D. andMitra S.“Phase Transition, Electro, and Structural Studies ofHigh Rate LiV3O8 Cathode with NanoplateMorphology”, Journal of Electro Society, Vol. 161(1), 2014, pp. A14-A22.

Sarkar S., Mahale P. and Mitra S.“Lithium Rich Composition of Li2RuO3 and Li2Ru1-xIrxO3 Layered Materials as Li-ion Battery Cathode”,Journal of Electro Society, Vol. 161 (6), 2014, pp.A934-A942.

Sarkar, A., Marchattiwar, A., Chakravartty, J.K.and Kashyap, B.P.“Kinetics of Dynamic Rrecrystallization in Ti-modified 15CR-15Ni-2Mo Austenitic StainlessSteel”, Journal of Nuclear Materials, 432 (1-3),2013, pp. 9-15.

Sarkar, V. and Khaparde, S.A.“Improving Demand Response and Bid-Consistencyof Price Outcome in the Security-ConstrainedDispatch Scheduling”, IEEE Transaction on PowerSystems, Vol.28, Issue.3, 2013, pp.2433-2445.

Sarpe, V. A. and Kulkarni, S. S.“Desymmetrization of Trehalose via RegioselectiveReductive DIBAL Ring Opening of Benzylidene andSubstituted Benzylidene Acetals” – Org. Biomol.Chem., 2013, Vol.11, pp.6460-6465.

“Regioselective Protection and Functionalisation ofTrehalose”, Trends In Carbohydrate Rearch, 2013,Vol.5, p.8-33.

Satapathy, M.R., Vinayak, B.G., Jayaprakash, K. andNaik, N.K.“Fatigue behavior of laminated composites with acircular hole under in-plane multiaxial loading,”Materials and Design, Vol. 51, 2013, pp. 347–356.

Sathish,S., Prasath, J., Satyanarayana Reddy, K.and Naik, N.K.“Damage evolution in delaminated woven fabric E-glass/epoxy composite plates under transverse staticpatch loading,” International Journal of DamageMechanics, Vol. 22 (7), 2013, pp. 982-1005.

Satija, J., Karunakaran, B., Mukherji, S.“Dendrimer Matrix for Performance Enhancement ofEvanescent Wave Absorption based Fiber-Optic

51

Biosensor”, RSC Adv., Vol. 4, 2014, pp.15841-15848.

Satpal, S.B., Khandare, Y., Guha, A. and Banerjee,S.“Structural Health Monitoring of a Cantilever BeamUsing Support Vector Machine,” InternationalJournal of Advanced Structural Engineering,Vol.(5), No. 2, 2013, DOI: 10.1186/2008-6695-5-2.

“Structural Health Monitoring (SHM) of Cantilever BeamUsing Support Vector Machine,” Journal of StructuralEngineering, Vol.(40), No. 1, 2013, pp.58-64.

Satyapal, M., Khanna, A.S., and Joseph, A.“Effect of Temperature on the Plasma Nitriding ofDuplex Stainless Steels”, International Journal ofEngineering and Innovative Technology, Vol. 2,Issue 11, May 2013.

Sazid, M. and Singh, T.N.“Two dimensional finite element simulation of rockblasting,” Arabian Journal of Geosciences, Vol.6(10), 2013, pp. 3703-3708

Schikowski, T., Schaffner, E., Meier, F., Phuleria,H.C., Vierkötter, A., Schindler, C., Kriemler, S.,Zemp, E., Krämer, U., Bridevaux, P.O., Rochat, T.,Schwartz, J., Künzli N. and Probst-Hensch NM.“Improved Air Quality and Attenuated Lung FunctionDecline: Modification by Obesity in the SAPALDIACohort”, Environmental Health Perspectives,Vol.121(9), 2013, pp.1034-1039.

Schmidt, M., Wiedemann,D., Moubaraki, B., Chilton,N.F., Murray, K. S., Kuduva, R. V., Rajaraman,G. andGrohmann, A.Iron(II) Complexes of Two Amine/Imine N5 ChelateLigands Containing a 1,4-Diazepane Core – ToCrossover or Not To Crossover” Eur. J. Inorg. Chem.,Vol.5, 2013, p. 958.

Scott, H. S., Ross, T. N., Chilton, N. F., Gass, I. A.,Moubaraki, B., Chastanet,G., Paradis, P., Jean-François, L., Kuduva, R. V., Rajaraman, G., Batten,S. R. and Murray K. S.“Crown-linked dipyridylamino-triazine ligands andtheir spin-crossover iron(II) derivatives: Magnetism,photomagnetism and cooperativity” Dalton Trans.,2013, Vol.42, pp.16494-16509. (Hot article)

Sebastian, C. D.“The Trajectory of Rational Faith in Non-VedicTraditions,” Journal of Sacred Scriptures, ISSN0974-0090, Vol. 7 (2), 2013, pp. 178 – 203.

“Two Women Testing the Wisdom of Two Wise Men:Queen of Sheba in the Bible and Gargi in theUpanishad”, Journal of Sacred Scriptures, ISSN0974-0090, Vol.8 (1), 2014, pp. 20-33.

Sebastian, C. D. and Singh Abhimanyu“The Initiation of the Chin to Madhyamika Buddhism:A Revisitation and Some Objections,” Asiatica, VII,Saint-Petersburg, Russia, ISSN 1819-446X, 2013, pp.90-102.

“Virtue Ethics of Buddhism: An Asian Contributionto World Culture,” Asian Studies InternationalJournal, ISSN: 2279-1949, Vol.1(1), 2013, pp. 7-13.

Sehgal, R.R. and Banerjee, R.“Research Highlights: Highlights from the latestarticles innanomedicine”, Nanomedicine, Vol. 8(4),2013, pp. 521-523.

Sen S., Solanki C.S. and Sharma P.“Parametric optimization of core-shell ZnS:Mn/ZnSnanoparticles prepared by ultrasound-controlled wetroute”, Journal of Luminescence, Vol. 145, 2014, pp.669-675.

Sen, A., Pande, K., Sheth, H.C., Sharma, K.K.,Sarkar, S., Dayal, A.M., Mistry, H.“An Ediacaran-Cambrian thermal imprint in Rajasthan,western India: Evidence from 40Ar-39Argeochronology of the Sindreth volcanics,” Journalof Earth System Science, Vol. 122, 2013, pp. 1477-1493.

Sengupta Saumya, Mandal Arjun, Mathur KeshavLal, Ghadi Hemant and Chakrabarti, S.“A comprehensive study on molecular beam epitaxy-grown InAs sub-monolayer quantum dots with differentcapping combinations,” Journal of Vacuum Scienceand Technology B, Vol.31(3), 2013.

Sethi, A.R., Patel, H.S. and Srivastava, A.“Quantitative imaging of inhomogeneities in turbidmedium using diffuse optical tomography: A Geneticalgorithm based approach,” SPIE proceedings,Vol. (8578), 2013.

Shah, N.G.“Energy Improvements in Jaggery Making Process”,Intl Journal of Energy for SustainableDevelopment, ESD-00285, December 2013, No. ofpages: 13, 4C.

“Microwave Heating as an Alternative QuarantineMethod for Disinfestation of Stored Food Grains,Hindawi Publishing Corporation”, InternationalJournal of Food Science, Vol. 2013, 2013, ArticleID 926468, 13 pages.

Shah, S., Ghosh, K., Jejurikar, S. and Chakrabarti,S.“Ground-state energy trends in single and multilayeredcoupled InAs/GaAs quantum dots capped with InGaAslayers: Effects of InGaAslayer thickness and annealing

52

temperature,” Materials Research Bulletin, Volume48, Issue 8, 2013, pp. 2933-2939.

Shanbhag, P. , Mane, V., Hazra, C. andNamboothiri, I. N. N.“Diastereoselective Synthesis of Substituted Decalinsfrom Rauhut-Currier Adducts of ConjugatedNitroalkenes”, J. Ind. Chem. Soc., 2013, Vol.90,pp.1713-1719 (Invited Article).

Shankar, A., Singh, T.N., Banerjee, U.S., Singh, J.And Sharma, Y.C.“Effect of Adsorption on Degradation of the PesticideAldicarb in the Soil,” International Review ofEngineering, Vol. 5( 2), 2013, pp. 88-101.

Sharma Ankita, Singh, Bhanu P. and Gathania,Arvind K.“Synthesis and characreization of dodecanethiol-stabilized gold nanoparticles,” Indian Journal ofPure & Applied , Vol. 52, 2014, p.93.

Sharma U., Togati N., Maji A., Manna, S. and Maiti,D.“Palladium-Catalyzed Synthesis of Benzofurans andCoumarins from Phenols and Olefins.” Angew.Chem. Int. Ed. 2013, Vol.52, p.12669 .

Sharma V.M., Nayak J.K. and Kedare S. B.“Shading and available energy in a parabolic troughconcentrator field”, Solar Energy, Vol. 90, 2013, pp.144-153.

Sharma, A., Dhar Subhabrata and Singh, B. P.“Role of the surface polarity in governing theluminescence properties of ZnO nanoparticlessynthesized by Sol-gel route,” Applied Surface Science,Vol.273, 2013, p.144-149.

Sharma, A., Dhar Subhabrata, Singh B. P., Nayak, C.,Bhattacharyya, D. and Jha, S.N.“Surface strain engineering through Tb doping to studythe pressure dependence of exciton-phonon couplingin ZnO nanoparticles,” J. Appl. Phys. Vol. 114, 2013,p. 214309.

Sharma, D.K. and Chowdhury A.“Spectrally resolved optical microscopy using atransmission grating spectrograph: Importance ofspatial selection”, Analyst (2014), Vol.139, pp.473-481.

Sharma, U., Patwardhan, A. and Platt, A.G.“Education as a determinant of response to cyclonewarnings: Evidence from coastal zones in India,”Ecology and Society, Vol. 18(2), 2013, p. 18.

Sharma, U., Togati, N., Maji, A. , Manna, S. , Maiti,D“Palladium-Catalyzed Synthesis of Benzofurans and

Coumarins from Phenols and Olefins.” Angew.Chem. Int. Ed., Vol.52, 2013, p. 12669.

Shashikanth, K., Salvi, K., Ghosh, S. andRajendran, K.“Do CMIP5 simulations of Indian summer monsoonrainfall differ from those of CMIP3?.” Atmosph. Sci.Lett..doi:10.1002/asl2.4666., 2013.

Shastri, Sudha“From Revenge to Resolution: Jonathan Safran Foer’sExtremely Loud and Incredibly Close and the Tragedyof Hamlet in present times” in the special issue ofDEOMEL (Dept of English and Other ModernEuropean Languages) Dept-Journal Apperception,devoted to the proceeds of the seminar, Renaissanceand its Afterlife, Visva-Bharati, Santiniketan: August2013, Volume VI: pp. 115-123.

Sheth, H. C. and Pande, K.“Geological and 40Ar/39Ar age constraints on late-stage Deccan rhyolitic volcanism, inter-volcanicsedimentation, and the Panvel flexure from the Dongriarea, Mumbai,” Journal of Asian s, Vol. 84, 2014,pp. 167-175.

Sheth, H.C., Zellmer, G.F., Demonterova, E.I.,Ivanov, A.V., Kumar, R., Patel, R.K.“The Deccan tholeiite lavas and dykes of Ghatkopar-Powai area, Mumbai, Panvel flexure zone: Geo,stratigraphic status, and tectonic significance,”Journal of Asian Earth Sciences, Vol. 84, 2014, pp.69-82.

Sheth, H.C., Zellmer, G.F., Kshirsagar, P.V. andCucciniello, C.“Geo of the Palitana flood basalt sequence and theEastern Saurashtra dykes, Deccan Traps: Clues topetrogenesis, dyke-flow relationships, and regionallava stratigraphy,” Bulletin of Volcanology, Vol. 75,2013, art. 701. DOI: 10.1007/s00445-013-0701-x

Shinde, V., Joshi, D., Ravi, B. and Narasimhan, K.“Optimization of Mould Yield in Multi-Cavity SandCastings,” Journal of Materials Engineering andPerformance, Vol.(22), No.6, 2013, pp.1558-1564.

Shinde, V.D., Ravi, B. and Narasimhan, K.“Effect of Orientation, Thickness, and Compositionon Properties of Ductile Iron Castings”, Materialsand Manufacturing Processes, 28 (5), 2013, pp. 539-544.

Shrivastava Mukul, Agrawal Amit and SharmaAtul“A Novel Level-Set Based Immersed BoundaryMethod for CFD Simulation of Moving BoundaryProblems,” Numerical Heat Transfer-BFundamentals,Vol.(63), No. 4, 2013, pp.304-326.

53

Shyam Kamal and Bandyopadhyay, B.‘‘Higher order sliding mode control: A controlLyapunov function based Approach”, Transactions onSystems and Control, Vol. 9, 2014, pp. 38-46.

Shyam Kamal, Raman Arun and Bandyopadhyay,B.‘‘Finite-time stabilization of fractional orderuncertain chain of integrator: An integral sliding modeapproach”, IEEE Transactions on Automatic Control,Vol. 58, No. 6, June 2013, pp. 1597-1602.

Singdeo D., Dey T. and Ghosh P.C.“Contact resistance between bipolar plate and gasdiffusion layer in high temperature polymerelectrolyte fuel cells”, International Journal ofHydrogen Energy, Vol. 39(2), 2014, pp. 987-995.

“Three Dimensional Computational Fluid DynamicsModelling of High Temperature Polymer ElectrolyteFuel Cell”, Applied Mechanics and Materials, Vol.492, 2014, pp. 365-369.

Singh D., Bhoi R.G., Ganesh A. and Mahajani S.M.“Synthesis of biodi l from vegetable oil using supportedmetal oxide catalysts”, Energy & Fuels, Vol. 28(4),2014, pp. 2743-2753.

Singh D., Patidar P., Ganesh A. and Mahajani , S.“Esterification of Oleic Acid with Glycerol in the Pr nceof Supported Zinc Oxide as Catalyst”, Industrial &Engineering R arch, Vol. 52(42), 2013, pp. 14776-14786.

Singh Devendra, Singh, S., Kumar Uttam,Srinivasa, R.S. and S.S. Major“Transparent conducting Ga-doped ZnO thinfilmsgrown by reactive co-sputtering of Zn and GaAs,” ThinSolid Films, Vol. 555, 2014, p. 126.

Singh Gulab, Venkataraman, Gopalan, YoshioYamaguchi and Sang-Eun Park.“Capability Assessment of Fully Polarimetric ALOS-PALSAR data for Discriminating Wet Snow fromOther Scattering Types in Mountainous Regions”,IEEE Transactions on Geoscience and RemoteSensing, Vol., 52, No.2, 2014, pp. 1177-1196.

Singh Gulab, Yamaguchi Yoshio, Park, S.E.,Boerner, W.M., Yi Cui and Venkataraman Gopalan“Categorization of the Glaciated Terrain of IndianHimalaya Using CP and FP Mode SAR”, IEEEJournal of Selected Topics in Applied EarthObservations and Remote Sensing, Vol. 7, 2014, pp.872-880.

Singh Harpartap and Parmananda, P.“Quorum sensing via static coupling demonstrated byChua’s circuits,” Phys. Rev. E., Vol. 88, (RapidCommunications), 2013, p.040903R.

Singh R. K., Rahul R. and Neergat M.“Stability issues in Pd-based catalysts: the role ofsurface Pt in improving the stability and oxygenreduction reaction (ORR) activity”, Physical, Vol. 15,2013, pp. 13044-13051.

Singh Rajan, Kulkarni Ajit, R. and Harendranath,C.S.“Dependence of Composition and ElectricalProperties of KNN Ceramics on SinteringTemperature,” Physica B 434, 2014, pp.139-144.

Singh S. and Mitra S.“Improved electro activity of nanostructuredLi2FeSiO4/MWCNTs composite cathode”, Electro-chimica Acta, Vol. 123, 2014, pp. 378-386.

Singh, V., Behera, T. K. and Islam, S.K. N.“Maoecrystal V: A Formidable Synthetic Challenge”J. Chem. Sci., Vol.125, 2013, pp.1301-1314.

Singh, A., Das, U. and Agrawal, T.“How Inclusive Has Regular Employment Been in India?A Dynamic View,” European Journal of DevelopmentR arch, Vol. 25, July 2013, pp.486-494.

Singh, A., Gaurav, S. and Das, U.“Household Headship and Academic Skills of IndianChildren: A Special Focus on Gender Disparities,”European Journal of Population, Vol. 29, November2013, pp.445-466.

Singh, A.K. and Singh, T.N.“Simulation of Frictional Strength and SteadyRelaxation Using the Rate and State DependentFriction Model,” Pure and Applied Geophysics, Vol.170, 2013, pp. 247-257.

Singh, G., Botcha, V.D., Narayanam, P.K., Sutar,D.S., Talwar, S.S., Srinivasa, R.S. and Major, S.S.“Effect of Ammonia Plasma Treatment on GrapheneOxide LB Monolayers”, Paper printed at the AIPConference Proceedings, 1512, 2013, pp.702-703.

Singh, G., Sutar, D.S., Divakar Botcha, V.,Narayanam, P.K., Talwar, S.S., Srinivasa, R.S. andMajor, S.S.“Study of Simultaneous Reduction and NitrogenDoping of Graphene Oxide Langmuir-blodgettMonolayer Sheets by Ammonia Plasma Treatment”,Nanotechnology, 24(35), 2013.

Singh, K.K., Singh, D.N. and Ranjith, P.G.“Simulating Flow through Fractures in a RockmassUsing Analog Material”, International Journalof Geomechanics, Vol. 14(1), 2014, pp.8-19.doi:10.1061/(ASCE)GM.1943-5622.0000295.

54

Singh, Kulveer and Sain Anirban“How helix-coil transition influence translocation ofa single stranded DNA and kinetics of its fluctuationinside the channel,” Euro Phys. Lett. Vol.104, 2013,p.18007.

Singh, N.S., Kulkarni, H., Pradhan, L. andBahadur, D.“A multifunctional Biphasic Suspension ofMesoporous Silica Encapsulated with YVO4:Eu3+andFe3O4 Nanoparticles: Synergistic Effect towardsCancer Therapy and Imaging”, Nanotechnology, 24,065101, 2013.

Singh, N.S., Sahu, N.K. and Bahadur, D.“Multicolor Tuning and White Light Emission fromLanthanide Doped YPVO4 Nanorods: Energy TransferStudies”, Journal of Materials , C 2 , 2014, pp. 548-555.

Singh, P., Trivedi, S., Menezes V. and Hosseini H.“Dynamic calibration and validation of anaccelerometer force balance for hypersonic liftingmodels,”Scientific World Journal, Vol. 2014, January2014, Article ID. 813759; 8 pages.

Singh, P.K., Kainthola, A. and Singh, T.N.“Rock mass assessment along the right bank of riverSutlej, Luhri, Himachal Pradesh, India,” Geomatics,Natural Hazards and Risk, 2013, online: DOI:10.1080/19475705.2013.834486

Singh, P.K., Kainthola, A., Singh, R., Gupte, S.S.,Maji, V. and Singh, T.N.“Estimation of critical parameters for slope instabilityin an in-pit mine dump,” SGAT Bulletin, Vol. 14(1),2013, pp. 34-44.

Singh, P.K., Wasnik, A.B., Kainthola, A., Sazid, M.and Singh, T.N.“The stability of road cut cliff face along SH-121: acase study,” Natural Hazards, Vol. 68(2), 2013, pp.497-507.

Singh, R., Kulkarni, A.R., Harendranath, C.S.“Effect of Sintering Temperature on Composition,Microstructure And Electrical Properties ofK0.5Na0.5NbO3 Ceramics”, Physica B: CondensedMatter.,434(1), pp. 139-144, February 2014.

Singh, R., Patro, P.K., Kulkarni, A.R. andHarendranath, C.S.“Synthesis of Nano-Crystalline Potassium SodiumNiobate Ceramic using Mechano Activation”,Ceramics International, 2014.

Singh, R., Umrao, R.K. and Singh, T.N.“Probabilistic analysis of slope in Amiyan landslidearea, Uttarakhand,” Geomatics, Natural Hazards andRisk, Vol. 4(1), 2013, pp. 13-29.

“Stability evaluation of road-cut slopes in the LesserHimalaya of Uttarakhand, India: Conventional andnumerical approaches,” Bulletin of EngineeringGeology and the Environment, 2013, DOI:10.1007/s10064-013-0532-1.

Singh, R., Vishal, V., Singh, T.N. and Ranjith, P.G.“A comparative study of generalized regression neuralnetwork approach and adaptive neuro-fuzzy inferencesystems for prediction of unconfined compressivestrength of rocks,” Neural Computing & Application,Vol. 23, 2013, pp. 499-506.

Singh, S. K. and Rajaraman, G.“Can anisotropic exchange be reliably calculated usingdensity functional methods? A case study on TrinuclearMnIII-MIII-MnIII (M=Fe, Ru and Os) CyanometalateSMMs?” - A European Journal, 2014, Vol.20, pp.113-123.

“Probing the Origin of Magnetic Anisotropy in aDinuclear {MnIII CuII} Single-Molecule Magnet: TheRole of Exchange Anisotropy”. - A European Journal,2014, DOI:10.1002/chem.201304357

“Decisive Interaction Which Determines Ferro/Antiferromagnetic coupling in {3d-4f} pair: A casestudy on dinuclear {V(IV)-Gd(III)} complexes”Dalton Trans. Vol. 42, 2013, p. 3623.

Singh, S. K., Pedersen, K. S., Sigrist, M., Thu n,C.A., Magnussen, S., Mutka, H., Piligkos, S., Weihe,H., Rajaraman,G. and Bendix, J“Angular dependence of the exchange interaction influoride-bridged GdIII–CrIII complexes” Chem.Comm., Vol.49, 2013, p.5583.

Singh, S., Barick, K.C. and Bahadur, D.“Shape-controlled Hierarchical ZnO Architectures:Photocatalytic and Antibacterial Activities”, CrystalEngineering Communication, 15, 2013, pp. 4631–4639.

“Fe3O4 Embedded ZnO Nanocomposites for Removalof Toxic Metal Ions, Organic Dyes and BacterialPathogen”, Journal of Materials Chemistry A, 1,2013, pp. 3325–3333.

Singh, T. N., Pradhan, S.P. and Vishal, V.“Stability of slopes in a fire-prone mine in JhariaCoalfield, India,” Arabian Journal of Geosciences,Vol. 6, 2013, pp. 419-421.

Singh, T.N., Ahmad, M., Kainthola, A., Singh, R.and Kumar, S.“A Stability Assessment of a Hill Slope – An Analyticaland Numerical Approach,” International Journal ofEarth Sciences and Engineering, Vol. 6 (1), 2013,pp. 50-60.

55

Singh, V. , Das, B. and Mobin, S. M.“Oxidative Dearomatization of o-Hydroxymethylphenoland Intramolecular π4s+ π2s Cycloaddition: AnExpedient Synthesis of a Tricyclic Intermediate forPlatencin” Synlett., Vol.24, 2013, pp. 1583-87.

Singh, V.V. and Hemachandra, N.“A characterization of stationary Nash equilibria ofconstrained stochastic games with independent stateprocesses”, Operations Research Letters, Vol. 42,no. 1, January 2014, pp. 48-52.

Singh, V.V., Hemachandra, N. and Rao MallikarjunaRao, K.S.“Blackwell optimality in stochastic games”,International Game Theory Review, Vol. 15, Issue 4,December 2013, pp. 1340025.

Singh,V., Islam, S.K., N. and Mali, J.“Molecular Complexity and Diversity from Aromatics.The of Spiro[cyclohexa-2,4-dienone-6,22 -oxiranes] andTheir Congeners:Cycloaddition and Beyond, Synlett.”(Account), Vol.24, 2013, pp. 2641-2659.

“Molecular diversity from aromatics. A tandemoxidativedearomatization, cycloaddition and reactivitymodulation in excitedstates: synthesis of tricyclo[5.3.1.01,5]undecanes and bicyclo[4.2.0]octanesfrom common precursors” Tetrahedron, Vol.69,2013, pp.8865-8871.

Singh B. and Solanki C.S.“Study Of Boron Precipitate Formed During FrontSide Emitter Formation With Boron Spin On Dopant(BSOD) Diffusion In n-Type c-Si Solar Cells”, EnergyProcedia, 2013.

Sinha S. and Sarkar S.K.“ZnO as transparent conducting oxide by AtomicLayer Deposition”, IEEE (PVSC 39), Vol. 39, 2013,pp. 1183 – 1186

“Effect of Partial Pressure of Precursors on Atomic LayerDeposited Zinc Oxide Films as TCO Material in SolarCell Application”, Applied Mechanics and Materials,Vol. 492, 2014, pp. 341-345.

Sinha, K. and Balasridhar, S.J.“Conservative Formulation of the k-Iμ TurbulenceModel for Shock— Turbulence Interaction,” AIAAJournal, Vol.51 8:, 2013, pp.1872-1882.

Sinha, V., Deibel, N., Agarwala, H., Garai, A.,Schweinfurth, D., Purohit, C. S., Lahiri, G. K.,Sarkar, B. and Kar, S.“Synthesis, Spectral Characterization, Structures, andOxidation State Distributions in[(corrolato)FeIII(NO)]n (n = 0, +1, -1) Complexes”,Inorg. Chem. Vol.533, 2014, p.1417.

Sivaiah, A. , Deepthi, S. , Samanta, S.Y., Hinge, V.K., Khedkar, J.K. and Rao, C.P.“Glyco-conjugate as selective switch on molecule forHg2+ in the pr nce of albumin proteins, blood serummilieu and on silica gel solid support” RSC Advances,Vol.4, 2014, pp.16290-16297.

Sivaiah, A., Khedkar, J.K. , Ramakrishna, C. andRao, C.P.“Thiourea linked peracetylated glucopyranosyl -anthraquinone conjugate as reversible ON - OFFreceptor for fluoride in acetonitrile”, Tetrahedron Lett.Vol.54, 2013, pp. 5629-5634.

Sivakumar, G., Dusane, R.O., and Joshi, S.V.“A Novel Approach to Process Phase Pure ‘-Al2O3Coatings by Solution Precursor Plasma Spraying”.Journal of the European Ceramic Society. 33, 2823,2013.

Siwatch, R. K., Yadav, D., Mukherjee, G.,Rajaraman, G. and Nagendran, S.“Digermylene Oxide Complexes: Facile Synthesis andReactivity” Inorg. Chem. 2013, Vol.52 (23), pp.13384–13391.

Sonar, R.M.“Towards automation of business intelligenceservices using hybrid intelligent system approach”.International Business Intelligence IJBIR, 2013,4(4), 61-92.

Sonawane J.M., Gupta A. and Ghosh P.C.“Multi-electrode microbial fuel cell (MEMFC): Aclose analysis towards large scale systemarchitecture”, International Journal of HydrogenEnergy”, Vol. 38(12), 2013, pp. 5106-5114.

Song Han, Kam-yiu Lam, Jiantao Wang, KrithiRamamritham, Aloysius K. Mok“On Co-Scheduling of Update and ControlTransactions in Real-Time Sensing and ControlSystems, Algorithms, Analysis, and Performance”,IEEE Trans. Knowl. Data Eng. Vol. 25(10), pp. 2325-2342, 2013.

Soni N., Doolla S. and Chandorkar M.C.“Improvement of Transient Response in MicrogridsUsing Virtual Inertia”, IEEE Transactions on PowerDelivery, Vol. 28(3), 2013, pp. 1830-1838.

Soni, G., Singh R., Mitra M. and Falzon, B. G.“Modelling matrix damage and fibre–matrixinterfacial decohesion in composite laminates via amulti-fibre multi-layer repr ntative volume element(M2RVE)”, International Journal of Solids andStructures, January 2014, Vol. 51, pp. 449-461.

Soni, G., Singh, R. and Mitra, M.“Buckling Behavior of Composite Laminates (with andwithout cutouts) Subjected to Non-uniform Loading,”

56

International Journal of Structural Stability andDynamics, Vol.(13), No. 8, 2013, pp.1-20.

Soni, G., Singh, R., Mitra, M. and Falzon, B.G.“Modelling Matrix Damage and Fibre-matrixInterfacial Decohesion in Composite Laminates via aMulti-fibre Multi-layer Repr ntative Volume Element(M2RVE),” International Journal of Solids andStructures, Vol.(51), No. 2: 2014, pp.449-461.

Soni, G., Singh, R., Mitra, M., Falzon, B.G. andYan, W.“Study of Localized Damage in Composite Laminatesusing Micro-Macro Method,”Composite Structures ,Vol.(113), 2014, pp.1-11.

Soumya, S., Kolwankar, S., George, E., Basu, S., Sen,S. and Inamdar, M.“Spatial anisotropy and heterogeneity in contractilityand adhesion distribution may contribute to cellsteering during migration,” App. Phys. Lett., Vol.104,2014, 083705.

Sreedeep, S. and Singh, D.N.“Closure to critical review of the methodologiesemployed for suction measurement”, InternationalJournal of Geomechanics, Vol. 13(3), 2013, pp. 326-327.

Sreejith, K.M., Rajesh, S., Majumdar, T.,SrinivasaRao, G., Radhakrishna, M. and Krishna,K.S.“High-resolution residual geoid and gravity anomalydata of the northern Indian Ocean – An input togeological understanding,” Journal of Asian EarthSciences, Vol.62, 2013, pp.616-626.

Sreenivasu, M. V. V. , Pathak, R.K., Hinge,V.K.,Dessingou J. and Rao, C. P.“A fluorescent di-zinc(II) complex of bis-calix[4]areneconjugate as chemosensing-ensemble for the selectiverecognition of ATP”, Supramolecular Chem. Vol. 26,2014, pp. 538 – 546.

Sreeraj E. S., Prejith E.K., Chatterjee K. andBandyopadhyay S.“An Active Harmonic Filter based on One CycleControl”, IEEE Transactions on IndustrialElectronics, Vol. 61(8), 2014, pp. 3799-3809.

Srinivasan N. R., Mitra S. and Bandyopadhyay R.“Improved electro performance of SnO2 -mesoporous carbon hybrid as a negative electrode forlithium ion battery applications” Physical, Vol. 16,2014, pp. 6630-6640.

Srivastava A.“Development and application of color schlierentechnique for investigation of three-dimensional

concentration field,” Journal of Crystal Growth,Vol.(383), 2013, pp.131-139.

Srivastava, S, Özdemir, V., Ray, S., Panga, J.R.,Noronha, S., Nair, B., Diwakar, S.“E-learning booster in developing world”, Nature, p.501, 316, 2013.

Subash Babu, A., Sanghi Udit, Ateekh Ur Rehman,Adel M. AL-Shayea and Mohamed Abdel FattahSharaf“A model to derive software maintenance policydecision,” International Journal of Productivity andQuality Management, Vol.(11), No.3, 2013.

Subbiah A.S., Halder A., Ghosh S., Mahuli N., HodesG. and Sarkar S.K.“Inorganic Hole Conducting Layers for Perovskite-Based Solar Cells”, Journal of Physical Letters, Vol.5, 2014, pp. 1748"1753.

Sudarshan Kumar, Das, S. and Shekher S.“Application of CFD and Kriging method foroptimizing the performance of a generic scramjetcombustor,” Acta Astronautica, Vol. 101, 2014, pp.111-119.

Sudharsan, D., Adinarayana, J., Rddy Raji, D.,Sreeivas, G., Ninomiya, S., Hirafuji, M., Kiura, T.and Tanaka, K.“Evaluation of Weather-based Rice Yield Models inIndia”, International Journal of Biometeorology(Springer), 57 (1), 107-123.

Sudheer S. and Prabhu S.V.“Heat Transfer in Vertical Casks Engulfed in OpenPool Fires,” Journal of Fire Sciences, Vol.10, 2013,pp.1-22.

Sudheer S., Desai, S. and Prabhu, S.V.“Physical Experiments and Fire Dynamic Simulationson Gasoline Pool Fires,” Fire Safety Technology,Vol.(13), No. 2, 2013, pp.140-162.

Sudheer, S., Kumar Lokendra, Manjunath, B.S.,Pasi Amit, Meenakshi, G. and Prabhu, S.V.“Fire Safety Distances for Open Pool Fires,” Infraredand Technology, Vol.(61), 2013, pp.265-273.

Sujesha Sudevalayam, Purushottam Kulkarni“Affinity-aware modeling of CPU usage withcommunicating virtual machines”, Journal of Systemsand Software, Vol. 86(10), pp. 2627-2638, 2013.

Sunder Raju, P.V., Eriksson, P.G., Catuneanu, O.,Sarkar, S. and Banerjee, S.“A review of the inferred geodynamic evolution ofthe Dharwar craton over the ca. 3.5 – 2.5 Ga periodand possible implications for global tectonics,”

57

Canadian Journal of Earth Sciences, Vol. 51, January2014, pp. 312-325.

Sunoj, R. B. , Katayev, D., Banarjee, D., Jia , Y.-X.,Besnard, C., Sharma, A. K., Sunoj, R. B. andKundig, P. E.“Synthesis of 3,3-Disubstituted Oxindoles byPalladium-Catalyzed Asymmetric Intramolecular α-Arylation of Amides. Reaction Development andMechanistic Studies’ Chem. Eur. J., Vol.19, 2013,p.11916. [Featured in Synfacts]

Sunthar, P.“Influence of micro-mixing on the size of liposomesself-assembled from miscible liquid phases,”Chemistry and Physics of Lipids, 172-173, 2013,pp. 20-30.

Suprabh Prakash, Rahaman Ushak and SamlarUma S.“The need for an early anti-neutrino run of NovA,”arXiv:1306.4125.

Suresh Kumar K.“A class of degenerate stochastic differentialequations with non-Lipschitz coefficients,” inProceedings of Indian Academy of Sciences,Vol.123, No.2, 2013, pp. 443-454.

Suresh Kumar, K. and Pal, Chandan“Risk-sensitive control of pure jump process oncountable state space with near monotone cost,” Appl.Math. Optim, Vol.68, 2013, pp. 311-331.

Surya Sandeep, G., Dudhe Ravishanka,r S., SaluruDeepak, Koora Bharath Kumar, Sharma Dinesh,K. and Rao Ramgopal V.“Comparison among different algorithms inclassifying explosives using OFETs”, Sensors &Actuators B: (Elsevier), Volume 176, January 2013,pp. 46-51.

Susha Lekshmi S. U., Singh, D.N. and ShojaeiBaghini, M.“A Critical Review of Soil Moisture Measurement”,accepted for publication in Elsevier MeasurementJournal, 2014.

Suthar. B., Ramadesigan. V., De. S., Braatz. R. D.and Subramanian. V. R.“Optimal Charging Profiles for ly ConstrainedLithium-ion Batteries”, Physical, Vol. 16(1), 2014,pp. 277-287.Sutter, T., Chatterjee, D., Ramponi, F. and Lygeros,J.“Isospectral flows on a class of finite-dimensionalJacobi matrices,” Systems & Control Letters, Vol. 62,No. 5, 2013, pp. 388-394.

Swain, A.K. and Bahadur, D.“Facile Synthesis of Twisted Graphene Solution fromGraphite”, RSC Adv., 3 42, 2013, pp. 19243-19246.

Swain, A.K., Dan Li and Bahadur, D.“UV-assisted Production of Ferromagnetic GraphiticQuantum Dots from Graphite”, Carbon, 57, 2013,pp. 346–356.

Swain, P., Shrivastava, M., Gossner, H., andShojaei Baghini, M.“Device-Circuit Co-Design for Beyond 1GHz 5 VLevel Shifter Using DeMOS Transistors”, IEEETransactions on Electron Devices, November 2013.

Swathi B. and Eldho T.I.“Groundwater Flow Simulation in Confined AquifersUsing Meshless Local Petrob-Galerkin (MLPG)Method”, ISH Journal of Hydraulics Engineering,Vol.19(3), 2013, pp.335-348.

Tailor, P.B., Agrawal, A. and Joshi, S.S.“Evolution of electro finishing process through crossinnovations and modeling,” International Journal ofMachine Tools & Manufacture, Vol.(66), 2013,pp.15-36.

Talaulikar Madhubala, Suresh,T., Elgar Desa andInamdar, A.B.“An empirical algorithm to estimate spectral averagecosine of underwater light field from remote sensingdata in coastal oceanic waters”, in Limnol. Oceanogr.,Methods 12, 2014, pp. 74–85.

Tandaiya, P., Narasimhan, R. and Ramamurty, U.“On the mechanism and the length scales involved inthe ductile fracture of a bulk metallic glass,” ActaMaterialia, Vol.(61), No. 5, 2013, pp.1558-1570.

Tandon, V.K., Maurya, H.K., Kumar, S., Rashid,A., Panda, D.“Synthesis and evaluation of 2-heteroaryl and 2,3-diheteroaryl-1,4-naphthoquinones that potentlyinduce apoptosis in cancer cells”, RSC Adv., Vol. 4,2014, pp. 12441-12447.

Tanwar, A.S., Goyal, V.D., Choudhary, D. andPanjikar, S.“Importance of Hydrophobic Cavities in AllostericRegulation of Formylglycinamide Synthetase:Insight from Xenon Trapping and Statistical CouplingAnalysis” PlosOne, 2013, Vol.8(11), e77781.

Taylor, E.N., Kummer, K.M., Dyondi, D., Webster,T.J., Banerjee, R.“Multiscale strategy toeradicatepseudomonasaeruginosa on surfaces using solid lipid nanoparticlesloaded with freefatty acids”, Nanoscale, Vol. 6, 2014,pp. 825-832.

58

Tej, P.R. and Singh, D. N.“Estimation of Tensile Strength of Soils fromPenetration Resistance”, International Journal ofGeomechanics, Vol.13(5), 2013, pp. 496-501.

Tejaswini, D. N. and Karmakar, S.“Modelling Impreciseness of Trophic State Levels forEutrophication Assessment,” Journal of CleanEnergy Technologies, Pub. IACSIT Press, Vol. 2(2),2014, pp. 140-144.

Tejwani R., Kumar G. and Solanki C.S.“A new technique of using GSM voice channel inremote monitoring of solar photovoltaic systems”,Energy Procedia, 2013.

Tewary, S., Gass, I.A., Murray, K.S. andRajaraman, G.“Theoretical Perspectives on Redox “Non-Innocent”Oxazolidine N-Oxide Iron Nitroxide Complexes”Eur.J. Inorg. Chem., Vol.2013, p. 1024.

Thakkar Parth S., Bandyopadhaya, B. and Gandhi,P. S.‘‘Sliding mode control for an underactuated slosh–container system using non–linear model”,International Journal of Advanced MechatronicSystems,Vol. 5, No. 5, 2013, pp. 335-344.

Thakur, A., Joshi, N. and Banerjee, R.“Proapoptoticmiltefosinenanovesicles show synergismwithpaclitaxel: Implications for glioblastomamultiformetherapy”, Cancer Letters, Vol. 334, 2013, pp. 274-283.

Thaokar, R.“Stability of immersed viscous liquid threads underelectric field,” International Journal of EngineeringScience, 62, 2013, pp. 9-21.

Thaokar, R.M.“Drop motion, deformation, and cyclic motion in anon-uniform electric field in the viscous limit”,Physics of Fluids, 25 (7), 2013, art. no. 072105.

“Electric field induced pearling instability incylindrical vesicles”, Soft Matter, 9 (30), 2013, pp.7274-7293.

Tharion, J., Satija, J. and Mukherji, S.“Glucose Mediated Synthesis of Gold Nanoshells: AFacile and Eco-friendly Approach Conferring HighColloidal Stability” RSC Advances, Vol. 4, 2014, pp.3984-3991.

Thinakaran, E. and Jothiprakash, V.“2D Pollutant transport analysis for differentdischarges in a river Estuary,” Journal ofEnvironmental Research and Development, Vol. 7,No. 3, 2013, pp 1237-1245.

Thirukumaran, V., Kumanan, C.J. and Biswal, T.K.“Geoinformatic modelling of Groundwater ResourceMapping of Shear Zone Regions- A case study onAttur Valley”, Tamil Nadu India, Journal of IndianSoc. Remote Sensing, 2014, DOI 10, 1007/s 12524-014-0375-7.

Thomas, A., Eldho T.I. and Rastogi, A.K.“A Comparative Study of Point Collocation BasedMeshfree and Finite Element Methods forGroundwater Flow Simulation”, ISH Journal ofHydraulics Engineering, Vol.20(1), 2014, pp.65-74.

Thomas, A., Singh, G., Krishnamoorthy, M. andVenkateswaran, J.“Distributed optimisation method for multi-resourceconstrained scheduling in coal supply chains”,International Journal of Production Research, Vol.51, issue 9, May 2013, pp. 2740-2759.

Thomas, A., Venkateswaran, J., Singh, G. andKrishnamoorthy, M.“A Resource Constrained Scheduling Problem withMultiple Independent Producers and a Single LinkingConstraint: A Coal Supply Chain Example”, EuropeanJournal of Operational Research, Vol. 236, issue 3,2014, pp. 946-957.

Thoppe, G., Borkar, V.S. and Manjunath, D.“A stochastic Kaczmarz algorithm for networktomography”, Automatica 50(3), 2014, p.910914.

Thota V.N., Brahmaiah, M. and Kulkarni, S. S.“Synthesis of a C-Glycoside Analog of beta-Galactosyl Ceramide, a Potential HIV-1 EntryInhibitor”, J.Org. Chem, 2013, Vol.78, pp.12082-12089.

Thyagrajan, R., Cantin, G.M.D., Bettles, C.J., Stone,N.A. and Kashyap, B.P.“Effect of Plating on Consolidation of CommerciallyPure Ti Powders”, Materials Research Innovations,2013, pp. 85-89.

Tirumkudulu M.S. and Venkatesh K.V.“Effect of Run and Tumble Time on RheologicalBehavior of a Suspension of Escherichia Coli”,Biophysical Journal, 104, 2013, p. 640.

“Chemotactic Migration of Escherichia Coli toGlucose is due to Additive Contributions fromPhosphotranspherase System and Trg ReceptorSensing Mechanism”, (2013), Biophysical Journal,2013, pp.104-161.

Tirumkudulu, M.S. and Paramati, M.“Stability of a moving radial liquid sheet: Time-dependent equations”, Physics of Fluids, 25 (10),2013, art. no. 102107.

59

Togati, N., Maity, S., Sharma U. and Maiti, D.“A Predictably Selective Nitration of Olefin withFe(NO3)3 and TEMPO.” J. Org. Chem., Vol. 78, 2013,p.5949.

Tokranov, A., Sheldon, B.W., P. Lu, X. Xiao andMukhopadhyay, A.“The Origin of Stress in the Solid ElectrolyteInterphase on Carbon Electrodes for Li-ion Batteries”,J. Electrochem. Soc., 161(1), 2014, pp. A58-A65.

Torubaev, Y., Mathur, P., Tauqeer, Md., Mobin, S.M., Lahiri, G. K., Pasynskii, A. A., Pavlova, A. V.and Grinberg, V.“Mixed-valent ferrocenyltellurenyl halides. Synthesis,electro and unusual molecular structure”, J.Organomet. Chem. Vol.749, 2014, pp.115-119.

Totti, F., Rajaraman,G., Iannuzzi,M. and Sessoli,R.“Computational Studies on SAMs of {Mn6} SMMson Au(111): Do properties change upon grafting?” J.Phys. Chem. C., Vol.117, 2013, pp.7186.

Tripathi A.M. and Mitra S.“Green Template-Free Synthesis of SnO2 NanoSphere - A Physical Understanding and Electro”,RSC Advances, Vol. 3, 2013, pp. 19423-19429.

“Tin Sulfide (SnS) Nanorods: Structural, Optical andLithium Storage Property Study”, RSC Advances,Vol. 4, 2014, pp. 10358-10366.

Tripathi, A., Bhattacharya, A. and Balazs, A.C.“Size Selectivity in Artificial Cilia ParticleInteractions: Mimicking the Behavior of SuspensionFeeders,” Langmuir, Vol.(29), No. 14, 2013, pp.4616-4621.

Tripathi, S., Prabhakar, A., Kumar, N., Singh, S.G. andAgrawal, A.“Blood plasma separation in elevated dimension T-shaped microchannel,” Biomedical Microdevices,Vol.(15), No. 3, 2013, pp.415-425.

Tripathy, A.K., Adinarayana, J., Sudharsan, D.,Merchant, S.N., Desai, U.B., Vijayalakshmi, K.,Reddy Raji, D., Sreenivas, G., Ninomiya,S.,Hirafuji, M., Kiura, T. and Tanaka, K.“Data Mining Techniques for Agriculture Pest/Disease Prediction”, Journal of ComputerInformation Systems and Industrial ManagementApplications (MIR publications, USA), Vol.5, 2013,pp. 427-436.

Tripathy, M. and Schweizer, K.S.“Theoretical study of the structure and assembly ofJanus rods”, Journal of Physical Chemistry B, 117(1), 2013, pp. 373-384.

Tumpa, S., Hansada, S., Pal, A. K., Venkatakrishna,G. V., Latif, I. A. and Datta, S. N.“Theoretical Investigation of PhotomagneticProperties of Oxoverdazyl-Substituted Pyrenes”,Journal of Physical Chemistry A, 2013, Vol.117(36), pp.8609-8622.

Tumpa, S., Hansda, S., Latif, I. A. and Datta, S. N.“Metaphenylene Based Nitroxide Diradicals: AProtocol to Calculate Intermolecular CouplingConstant in One-Dimensional Chain.” Journal ofPhysical Chemistry A(2013), DOI: 10.1021/jp407531r; (2013) 117, 13151-13160.

Tyagi Himanshu, Mohapatra, J., Kushwaha, A.and Aslam, M.“Tuning the observability of surface plasmon insilica-gold core-shell nanoparticles using cuprousoxide corona,” ACS Appl. Mater. Interfaces, Vol.5,No.23, 2013, pp. 12268–12274.

Uday, K.V. and Singh, D.N.“Investigations on Cracking Characteristics of Fine-grained Soils under Varied EnvironmentalConditions,” Drying Technology, Vol.31(11), 2013,pp. 1255-1266.

Unhelkar, V.V. and Hablani, H.B.“Satellite Attitude Determination with Earth and SunSensors and Gyros using Steady-state Kalman Filter,”Bar-Itzhack Memorial Symposium on Estimation,Navigation and Spacecraft Control, Springer VerlagEdition – 2013.

Upadhyay A., Vaidya, S., Venkatasai, V. S., Jayapal,Srivastava, V. K. and Shanmugam, Muralidharan“Synthesis and Characterization of 3d and 4f metalcomplexes of Schiff base ligands” Polyhedron, Vol. 66,2013, pp.87-96.

Upadhyay, A., Komatireddi, A., Ghirri, A., Tuna,F., Langley, S. K. , Srivastava, A. K. , Sanudo, C.E., Murray, K. S., McInnes, E. J. L., Affronte andShanmugam, Maheswaran“Synthesis and magnetothermal properties of aferromagnetically coupled NiII-GdIII-NiII cluster”Dalton Trans., Vol.43, 2014, pp.259-266.

Upadhyay, A., Rajpurohit, J., Singh, M.K., Dubey,R., Srivastava, A.K., Kumar, A., Rajaraman, G.,Shanmugam, M.“Hydroxo-Bridged dimmers of oxo-centeredruthenium(III) triangle: Synthesis and spectroscopicand theoretical investigations”, Chem. Eur. J., Vol. 20,2014, pp. 1-11.

“Hydroxo bridged dimers of Oxo-centeredRuthenium(III) triangle: Synthesis, Spectroscopic andTheortical investigation”, Chem.-Eur. J., Vol. 20,2013, pp.6061-6070.

60

Upadhye, N. S. and Vellaisamy, P.“Improved bounds for approximations to compounddistributions,” Statistics & Probability Letters,Vol.83,2013, pp. 467-473.

Vadiraj Katti, Sudheer, S. and Prabhu, S.V.“Pressure Distribution on a Semi-Circular ConcaveSurface Impinged by a Single Row of Circular Jets,”Experimental and Thermal Fluid Sciences, Vol.(46),2013, pp.162-174.

Vaidya Avinash R., Gupta Rajiv K., Mishra SanjeevK. and Mukherjee Jayanta“Right-Hand/Left-Hand Circularly Polarized HighGain Antennas using Partially Reflective Surfaces”,accepted in IEEE Antenna and Wireless PropagationLetters.

Vanam Chaitanya Krishna and Hemachandra, N.“Some excess-based solutions for cooperative gameswith transferable utility”, International Game TheoryReview, Volume 15, Issue 04, December 2013,pp.1340029.

Varade, V., Agrawal, A. and Pradeep, A.M.“Behavior of Rarefied Gas Flow Near Junction of aSuddenly Expanding Tube,” Journal of FluidMechanics, Vol. 739, 2013, pp. 363-391.

Varma Surender Gadhiraju, Sahbi Hichem, BanerjeeBiplab and Buddhiraju Krishna Mohan“Supervised Change Detection in Satellite ImageryUsing Super Pixels and Relevance Feedback”,Geomatica, Vol. 68, No. 1, 2014, pp. 5-14.

Varpe, M. and Pradeep, A.M.“Investigation of the Shear Flow Effect and TipClearance on a Low Speed Axial Flow Compressor”,International Journal of Rotating Machinery, Vol.2013, 2013, Article ID 490543, 22 pages.

Vasa, P., Dharmadhikari, J. A., Dharmadhikari, A.K., Sharma, R., Singh, M. and Mathur, D.“Supercontinuum generation in water by intense,femtosecond laser pulses under anomalous chromaticdispersion,” Physical Review A, Vol. 89, 2014, p.043834.

Vasa, P., Singh, M., Bernard, R., Dharmadhikari,A.K., Dharmadhikari, J.A. and Mathur, D.“Supercontinuum generation in water doped withgold nanoparticles,” Applied Letters, Vol.103, 2013,p. 111109.

Velaga, N.R. and Pangbourne, K.“Achieving genuinely dynamic road user charging:Issues with a GNSS-based approach,” Journal ofTransport Geography, Vol. 34, 2014, pp. 243-253.

Velaga, N.R., Nelson, J.D., Sripada, S., Edwards,P., Corsar, D., Sharma, N. and Beecroft, M.“Development of a Hybrid Map-matching Algorithmfor Rural Passenger Information Systems via MobilePhones and Crowd-Sourcing,” Journal of Computingin Engineering, ASCE, Vol 27, 2013, pp. 732 – 742.

Vellaisamy, P., Upadhye, N. S. and Cekanavicius,V.“On negative binomial approximation,” Theory ofProbability and Its Applications, Vol.57, 2013, pp. 97-109.

Veluri P. and Sagar Mitra S.“Enhanced High Rate Performance of Alpha- Fe2O3Nanotubes with Alginate Binder as ConversionAnode”, RSC Advances, Vol. 3, 2013, pp. 15132-15138.

Venghateri, J.B., Gupta, T.K., Verma, P.J., Kunwar,A., Panda, D.“Ansamitocin P3 depolymerizes microtubules andinduces apoptosis by binding to tubulin at thevinblastine site”, PLoS One., Vol. 8, e75182, 2013.

Venkataraman, C.“Bounding the role of black carbon in the climatesystem: A scientific assessment,” Journal ofGeophysical R arch D: Atmospheres, 118 (11), 2013,pp. 5380-5552.

“Pulse-heat aerosol reactor (PHAR): Processingthermolabile biomaterials and biomolecules intonanoparticles with controlled properties”, AerosolScience and Technology, 47 (4), pp. 383-394.

“Size distribution and dye release properties ofsubmicron liposome aerosols”, Powder Technology,246, 2013, pp. 530-538.

“GCM simulations of anthropogenic aerosol-inducedchanges in aerosol extinction, atmospheric heatingand precipitation over India”, Journal of GeophysicalResearch D: Atmospheres, 118 (7), 2013, pp. 2938-2955.

Venkatesh K.V. Darunte L, Bhat P. J.“Warburg Effect,” Encyclopedia of System Biology,2013, pp.2349-2350.

Venkatesh, K.V.“Characterization of burden on growth due to thenutritional state of media and pre-induced geneexpression”, (2013) Archives of Microbiology, 195(4), pp. 291-295.

“Lysine overproducing Corynebacterium glutamicumis characterized by a robust linear combination of twooptimal phenotypic states”, Systems and SyntheticBiology, 7(1-2), 2013, pp. 51-62.

“Flux Balance Analysis”, Encyclopedia of SystemsBiology, 2013, pp.749-752

61

“Pathway Modeling Metabolic”, Encyclopedia ofSystems Biology, 2013, pp. 1652-1655.

“Hill Equation”, Encyclopedia of Systems Biology,2013, pp. 892-895.

Genetic Regulation Mechanisms,” Encyclopedia ofSystems Biology, 2013, pp.827-830.

“Ultrasensitivity”, Encyclopedia of Systems Biology,2013, pp. 2309-2311.

“Amplification,” Encyclopedia of Systems Biology,2013, pp. 22-23.

Verma Jugal K. and Masuti Shreedevi“Local cohomology of bigraded Rees algebras andnormal Hilbert coefficients,” Journal of Pure andApplied Algebra, Vol.218, 2014, pp. 904-918.

Verma, A.K. and Singh, T.N.“Prediction of water quality from simple fieldparameters”, Environmental Earth Sciences, Vol.69(3), 2013, pp. 821-829.

“A neuro-Fuzzy Approach for Prediction ofLongitudinal Wave Velocity,” Neural Computing andApplication, Vol. 22 (7-8), 2013, pp. 1685-1693.

Verma, A.K., Singh,T. N. and Maheshwar, S.“Comparative Study of Intelligent Prediction Modelsfor Pressure Wave Velocity,” Journal of Geosciencesand Geomatics, Vol. 2(3), 2014, pp. 130-138.

Verma, D., Kainthola, A., Gupte, S.S. and Singh,T.N.“A Finite Element Approach of Stability Analysis ofInternal Dump Slope in Wardha Valley Coal Field,India, Maharashtra,” American Journal of Miningand Metallurgy, Vol. 1(1), 2013, pp.1-6.

Verma, D., Kainthola, A., Thareja, R. and Singh,T.N.“Stability Analysis of an Open Cut Slope in WardhaValley Coal Field,” Journal Geological Society ofIndia, Vol. 81, 2013, pp. 804-812.

“A Review on Numerical Slope Stability Analysis,”International Journal of Science, Engineering andTechnology Research, Vol. 2(6), 2013, pp. 1315-1320.

Verma, D., Kumar R. and Namboothiri, I. N. N.“Synthesis of Withasomnines and Their Non-naturalAnalogs from Aldehydes and 4-Nitro-1-butanol inThree Steps,” J. Org. Chem.2013, Vol.78, pp.3482-3486.

Verma, G., Swain, S. and Khanna, A.S.“Hydrophobic Self-Cleaning Coating Based onSiloxane Modified Waterborne Polyester”,

International Journal of Scientific Engineering andTechnology, 2 (4), 2013, pp. 192-200.

Verma, P., Verma, P. and Sunoj, R. B.‘Mechanism of NHC Catalyzed Aza-Morita-Baylis-Hillman Reaction: Insights on a New Substrate-Catalyzed Bimolecular Pathway’ Org. Biomol. Chem.,Vol.12, 2014, p.2176.

Vichare, S., Jain, I., Inamdar, M. and Padinhateeri,R.“Forces due to curving protofilaments inmicrotubules”. Phys Rev E Stat Nonlin Soft MatterPhys. Vol. 88(6), p. 062708, 2013.

Vichare, S., Sen, S. and Inamdar, M.“Cellular mechanoadaptation to substrate properties:Contributions of substrate stiffness and thickness tocell stiffness measurements using AFM,” Soft Matter,Vol.10, 2014, 1174.

Vijay Gabale, Bhaskaran Raman, Partha Dutta,Shivkumar Kalyanaraman“A Classification Framework for SchedulingAlgorithms in Wireless Mesh Networks”, IEEECommunications Surveys and Tutorials, Vol. 15(1),pp. 199-222, 2013.

Vikas M., Ajay B. and Eldho T.I.“Numerical Simulation of Pump Sump FlowCharacteristics”, Research & Reviews: Journal ofEngineering & Technology, Vol. 2 (3), 2013, pp. 49-57, ISSN: 2319-9873.

Vinjamur, M.“Experimental investigation of heat transfer in gas-solid packed fluidized bed”, Powder Technology, 246,2013, pp. 252-268.

“Analysis of sensitivity of equilibrium constant toreaction conditions for esterification of fatty acidswith alcohols”, Industrial and EngineeringResearch, 52 (3), 2013, pp. 1205-1215.

“Void fraction and effective thermal conductivity ofbinary particulate bed”, Fusion Engineering andDesign, 88 (4), 2013, pp. 216-225. Cited 1 time.

Hydrodynamics of beds of small particles in the voidsof coarse particles”, Powder Technology, 235, 2013,pp. 256-262.

“The optimization of the length of horizontal wellsfor bottom water r rvoir conditions” (2013) EnergySources, Part A: Recovery, Utilization andEnvironmental Effects, 35 (24), 2013, pp. 2337-2347.

Vinuchandran, R. and Ramakrishnan, D.“Detection of Fronts from Ocean Colour MonitorImages using Entropic Technique: A case study of

62

meso- and micro-scale chlorophyll mapping in Bayof Bengal, India,” Adv. Remote Sensing, 2013,doi:10.4236/ars.2013.22010

Vishal, V., Ranjith, P.G. and Singh, T.N.“CO2 permeability of Indian bituminous coals:Implications for carbon sequestration,” InternationalJournal of Coal Geology, Vol. 105, 2013, pp. 36-47.

Vishal, V., Ranjith, P.G., Pradhan, S.P. and Singh,T.N.“Permeability of sub-critical carbon dioxide innaturally fractured Indian bituminous coal at a rangeof down-hole stress conditions”, EngineeringGeology, Vol. 167 (17), 2013, pp. 148-156.

Vishal, V., Singh, L., Pradhan, S. P., Singh, T.N.and Ranjith, P.G.“Analog modeling of Gondwana coal seams in Indiaas coalbed methane r rvoirs substituted for carbondioxide sequestration,” Energy, Vol. 49(1), 2013, pp.384-394.

Vishnoi, P., Walawalkar, M. G., Sen, S., Datta, A.,Patwari, G. N. and Murugavel, R.“Selective Fluorescence Sensing of PolynitroaromaticExplosives by Triaminophenylbenzene Scaffolds” PhysChem.- Chem. Phys., Vol.16, 2014, pp.10651-10658.

Vishwanathan Sundar“A counting proof of the Graham-Pollak Theorem”,Discrete, Vol. 313(6), pp. 765-766, 2013.

Viswanathan, G.“Efficient computation of periodic state of cyclicfixed-bed processes”, Engineering Science, 101,2013, pp. 90-98.

Viswanathan, G.A. and Wangikar, P.P.“Rhythm of carbon and nitrogen fixation in unicellularcyanobacteria under turbulent and highly aerobicconditions”, Biotechnology and Bioengineering,110 (9), 2013, pp. 2371-2379.

Vittal, H., Karmakar, S. and Ghosh, S.“Diametric Changes in Trends and Patterns of ExtremeRainfall over India from Pre-1950 to Post-1950,”Geophysical Research Letters, Publisher AmericanGeophysical Union (AGU), Vol. 40(12), pp. 3253-3258.

Vyawahare Vishwesh A. and Nataraj, P.S.V.“Development and Analysis of Some Versions of theFractional-order Point Reactor Kinetics Model for aNuclear Reactor with Slab Geometry”,Communications in Nonlinear Science andNumerical Simulation, Elsevier, Volume 18, 2013,pp. 1840–1856.

“Fractional-order Modeling of Neutron Transport ina Nuclear Reactor”, Applied MathematicalModelling, Elsevier, Volume 37, Issue 23, December2013, pp. 9747–9767.Wang M, Beelen R, Basagana X, Becker T,Cesaroni G, de Hoogh K, Dedele A, Declercq C,Dimakopoulou K, Eeftens M, Forastiere F,Galassi C, Grazuleviciene R, Hoffmann B,Heinrich J, Iakovides M, Kunzli N, Korek M,Lindley S, Molter A, Mosler G, Madsen C,Nieuwenhuijsen M, Phuleria HC, Pedeli X,Raaschou-Nielsen O, Ranzi A, Stephanou E, SugiriD, Stempfelet M, Tsai MY, Lanki T, Udvardy O,Varro MJ, Wolf K, Weinmayr G, Yli-Tuomi T,Hoek G. and Brunekreef B.“Evaluation of Land Use Regression Models for NO2and particulate Matter in 20 European Study Areas:The ESCAPE Project,” Environmental Science &Technology, Vol.47(9), 2013, pp.4357-4364.

Wang, D. Q., Chen, J.C.H., Klochan, O., Das Gupta,K., Reuter, D., Wieck, A.D., Ritchie, D.A. andHamilton, A.R.“Influence of surface states on quantum and transportlifetimes in high-quality undoped heterostructures,”Physical Review B., Vol.87, 2013, p.195313.

Wang, W., Vasa, P., Pomraenke, R., Vogelgesang,R., De Sio, A., Sommer, E., Maiuri, M., Manzoni,C., Cerullo, G. and Lienau, C.“Interplay between strong coupling and radiativedamping of excitons and surface plasmon polaritonsin hybrid nanostructures,” ACS Nano, Vol. 8, 2014,p.1056.

Wangikar, P.P.“Metabolic flux analysis of Cyanothece sp. ATCC 51142under mixotrophic conditions,” PhotosynthesisResearch, 118 (1-2), 2013, pp. 191-198.

“Model based optimization of high cell densitycultivation of nitrogen-fixing cyanobacteria,”Bioresource Technology, 148, 2013, pp. 228-233.

“Rhythmic and sustained oscillations in metabolismand gene expression of Cyanothece sp. ATCC 51142under constant light”, Frontiers in Microbiology, 4(DEC), art. no. Article 374, 2013.

“Association of GST null genotypes with anti-tuberculosis drug induced hepatotoxicity in WesternIndian population,” Annals of Hepatology, 12 (6),2013, pp. 959-965.

“Association of N-acetyltransferase 2 andcytochrome P450 2E1 gene polymorphisms withantituberculosis drug-induced hepatotoxicity inWestern India”, Journal of Gastroenterology andHepatology (Australia), 28 (8), 2013, pp. 1368-1374.

63

“A global analysis of adaptive evolution of operons incyanobacteria”, Antonie van Leeuwenhoek,International Journal of General and MolecularMicrobiology, 103 (2), 2013, pp. 331-346.

Highlights from the Indo-US workshop “cyanobacteria:Molecular networks to biofuels” held at Lonavala, India,Photosynthesis Research, 118 (1-2), 2013, pp. 1-8.

Wangikar, P.P. and Viswanathan, G.A.“SHARP: Genome-scale identification of gene-protein-reaction associations in cyanobacteria,”Photosynthesis Research, 118 (1-2), 2013, pp. 181-190.

Wangikar, P.P. and Jadhav, S.“Distribution of live and dead cells in pellets of anactinomycete Amycolatopsis balhimycina and itscorrelation with balhimycin productivity”, Journal ofIndustrial Microbiology and Biotechnology, 40 (2),2013, pp. 235-244.

Wankhade R. L. and Bajoria, K.M.“Stability of Simply Supported Smart PiezolaminatedComposite Plates using Finite Element Method”,International Journal of Advancements in andAeronautical Engineering, Volume 1(1), 2013,pp. 14-19.

Wankhede, R.G., Morey, S., Khanna, A.S., Birbilis,N.“Development of Water-Repellent Organic–InorganicHybrid Sol–Gel Coatings on Aluminum using ShortChain Perfluoro Polymer Emulsion”, AppliedSurface Science, 283, pp. 1051-1059.

Watson Thomas F., Weber Bent, Miwa Jill A.,Mahapatra S,, Roel M P Heijnen and Simmons,M.Y.“Transport in Asymmetrically Coupled Donor-BasedSilicon Triple Quantum Dots,” Nano Letters, Vol. 14,2014, p.1830.

Watvisave D. S., Bhandarkar U. V. and Puranik B.P.“Investigation of wall effects on flow characteristicsof a high Knudsen number nozzle,” Nanoscale andMicroscale Thermophysical Engineering , Vol.(17)2, 2013, pp.124-140.

Weber Bent, Tan Matthias Y. H., MahapatraSuddhasatta, Watson Thomas F., Hoon Ryu,Rahman Rajib, Lloyd C. L. Hollenberg, GerhardKlimeck and Simmons, M.Y.“Spin Blockade and Exchange in Coulomb-confined Silicon Double Quantum Dots,” NatureNanotechnology, 2014, doi:10.1038/nnano.2014.63.

Weismiller M.R, Wang S.Q., Chowdhury A.,Thynell S.T. and Yetter R.A.“Confined rapid thermolysis studies of ammoniaborane,” Thermochimica Acta, Vol.(551), No. 10,2013, pp.110-117.

Wolfgang Lehner, Sunita Sarawagi“Special issue on best papers of VLDB 2011”, VLDBJ., Vol. 22(1), pp.1-2, 2013.

X. Chen, A. Jukan and A. Gumaste“Optimized Parallel Transmission in Elastic OpticalNetworks to Support High-Speed Ethernet” in, IEEE/OSA Journal of Lightwave Technology, December2013.

Yadav Brajesh S., Mohanta, P. Srinivasa, R.S. andS.S. Major“Electrical and optical properties of transparentconducting InxGa1”xN alloy films deposited byreactive co-sputtering of GaAs and indium,” ThinSolid Films, Vol. 555, 2014, p. 179.

Yadav Sangita, Pani Amiya K. and Nataraj Neela“Superconvergent discontinuous Galerkin methodsfor linear non-selfadjoint and indefinite ellipticproblems,” J. Sci. Comput., Vol.54, No. 1, 2013, pp.45–76.

Yadav Sangita, Pani Amiya K., and Park Eun-Jae“Superconvergent discontinuous Galerkin methodsfor nonlinear elliptic equations,” Math. Comp.,Vol.82, No. 283, 2013, pp. 1297–1335.

Yadav, A., Mukherji S. and Garg, A.“Removal of COD and Color from SimulatedTextile Wastewater Using a Combination of /Physico-Processes,” Industrial & Engineering Research,Vol. 52 (30), 2013, pp. 10063–10071.

Yadav, B.R. and Garg, A.“Ferulic acid degradation by wet oxidation process”,International Journal of ChemTech Research, Vol.5, April-June 2013, pp. 654-658.

Yadav, S., Sharma,P., Yamasani,P., Minaev, S. andKumar Sudarshan“A prototype micro-thermoelectric power generatorfor microelectro systems,” Applied Letters, Vol.104, 2014, 123903.

Yen, Y. F., Kulkarni S. S., Chang, C. W. and Luo, S.Y.“Concise synthesis of alpha-galactosyl ceramide fromD-galactosyl iodide and D-lyxose” Carbohydr. Res.2013, Vol. 368, pp. 35-39.

Zachariah M and Reddy Janga, M.“Development of an entropy-copula based stochasticsimulation model for generation of monthly inflows

64

into the Hirakud dam,” ISH Journal of HydraulicEngineering, Vol. 19, No.3, 2013, pp. 267-275.

Zodinmawia and Ramadevi, P.“SU(N) quantum Racah coefficients & non-toruslinks,” Nucl.Phys. B, Vol. 870, 2013, pp. 205-242.Zope-Chaudhari Sangita and Venkatachalam, P.“Conceptual Framework for Geospatial DataSecurity”, International Journal of DatabaseManagement System, Vol. 5, Issue 3, 2013, pp. 29 –35.

Papers in Proceedings ofConferences/Symposia/Seminars

Adari, R., Banerjee, D., Ganguly, S. and Saha, D.Fermi-level depinning at metal/GaN interface by aninsulating barrier”, Thin Solid Films 550, 564, 2014.

“Memory Elements Using Multiterminal MagnetoresistiveDevices”, Applied Physics Express 6, 043002, 2013.

Adarsh S. and Reddy Janga, M.“Wavelet-Model Tree Conjunction Approach forRainfall Projections Under RepresentativeConcentration Pathways,” Proceedings of 18thInternational Conference on Hydraulics, WaterResources, Coastal and Environmental Engineering(HYDRO-2013), IIT Madras, India, December 4-6, 2013,pp.29-37.

“Trend Analysis of Rainfall in Assam-MeghalayaMeteorological Subdivision using Non-ParametricMethods and Wavelet Analysis,” Proceedings of 2ndInternational Conference on Modeling & Simulationin Civil engineering (ICMSC-2013), TKM College ofEngineering, Kollam, December 12-14, 2013, pp. 423-430.

Agarwadkar, Y. and Khire, M. V.“Risk matrix approach for analyzing sustainability ofland resources towards desertification in arid/semiaridzones”, International Symposium on a SustainableFuture - 2013 (ISSF-2013), Mumbai, India, 2013.

Agarwal Deep, Mishra Ashish, Vijaykumar, H., Vedula,R.P. and Prabhu, S.V.“Heat Transfer Distribution of Perforated Plate BurnerFlames Impinging on a Flat Plate,” 40th Nationalconference on Fluid Mechanics and Fluid Power, NITHamirpur, 2013, India.

Agarwal, M., Singh, U. and Dusane, R.O.“Isotropic Etching of Polycrystalline Silicon Wafer byAcidic Solution”, Proceedings of InternationalConference on “Advanced Nanomaterials andEmerging Engineering Technologies, ICANMEET,Chennai, July 2013.

Agarwal, S. and Mitra, M.“Damage Detection using Matching Pursuit andArtifical Neural Network”, Asia-Pacific Conferenceon Non-Destructive Testing, Renaissance ConventionCenter, Mumbai, November 2013.

“Lamb wave based damage detection using MatchingPursuit and Support Vector Machine classifier”, SPIESmart Structures and Materials+ NondestructiveEvaluation and Health Monitoring, San Diego, USA,March 2014.

Agrawal Amit, Venugopal, A. and Prabhu S.V.“Spanwise correlation in the wake of circular cylinderand normal plate placed inside a pipe,” 66th AnnualMeeting of the American Physical Society’s Divisionof Fluid Dynamics (DFD), Pittsburgh, 2013, UnitedStates.

Aher, P. D., Adinarayana, J., Gorantiwar, S. D. andSawant, S. A.“Remote Sensing and GIS based Spatio-temporalAssessment of Runoff using SCS-Curve NumberModel”, 6th International Congress ofEnvironmental Research, December 19-21, 2013,Aurangabad, India.

Airan, A., Bhartiya, S. and Bhushan, M.“Linear machine: A novel approach to point locationproblem”, IFAC Proceedings Volumes (IFAC-PapersOnline), 10 (PART 1), 2013, pp. 445-450.

Ajay Nagesh, Ganesh Ramakrishnan, LauraChiticariu, Rajasekar Krishnamurthy, AnkushDharkar and Pushpak Bhattacharyya,“Towards Efficient Named-Entity Rule Induction forCustomizability”, ILP, Rio De Geniro, Brazil, August28-30, 2013

Ajay, Raja, V.S., Sivakumar, G. and Joshi, S.V.“Role of Chlorides and Vanadates on Hot CorrosionBehavior of Solution Precursor Plasma Spray and AirPlasma Spray Thermal Barrier Coatings”,International Corrosion Prevention Symposium forResearch Scholars (CORSYM-2014), Mumbai, India,February 2014.

Akbari, S. and Raje, D.“Change detection in dependence structure ofstreamflows in the Godavari river basin,” Proceedingsof National conference on Water ResourceManagement Achievements and Challenges (WRM-AC 2014), ISBN 978-81-927151-7-9, Department of CivilEngineering, Jamia Milia Islamia, March 2014, NewDelhi.

Akram, M. and Kumar Sudarshan“On the variation of laminar burning velocitytemperature exponent with equivalence ratio,” 24th

International Colloquium on Dynamics of Reactive

65

and Explosive Systems, Taipei, Taiwan, July 28–August 3, 2013.

“Laminar Burning Velocity of Hydrocarbon Fuel-AirMixtures at Elevated Temperatures”, 9th Asia PacificCombustion Conference, Gyeongju Hilton, Gyeongju,South Korea, May 19-22, 2013.

Akshay S., Nathalie Bertrand, Serge Haddad andLoïc Hélouët“The Steady-State Control Problem for MarkovDecision Processes”, QEST 2013, pp. 290-304,2013.Akshay, S., Bertrand, N., Haddad, S. and Helouet,L.“The steady-state control problem for Markov decisionprocesses,” in proceedings of the 10th InternationalConference on Quantitative Evaluation of Systems(QEST), Buenos Aires, Argentina. Springer LNCS, 2013,pp. 290-304.

Akshay, S., Bollig, B. and Gastin, P.“Event-clock Message Passing Automata: A logicalcharacterization and an emptiness checking algorithm,”in Formal Methods in Systems Design, Springer,Volume 42, Number 3, 2013, pp. 262-300.

Akshay, S., Bollig, B., Gastin, P., Mukund, M. andNarayan Kumar K.“Distributed timed automata with independentlyevolving clocks,” in Fundamenta Informaticae, IOSPress, Volume 130, Number 4, 2014, Pages 377-407.

Akshay, S., Dinca, I., Genest, B. and Stefanescu, A.“Implementing realistic asynchronous automata,” inproceedings of the 33rd IARCS Annual Conferenceon Foundations of Software Technology andTheoretical Computer Science (FSTTCS), Guwahati,India. Leibniz International Proceedings inInformatics, LiPIcs, Dagstuhl, Vol. 24, 2013, pp. 213-224.

Alam, M.I. and Pant, R.S.“Conceptual Design and Analyses of High AltitudeAirship”, Proceedings of International Conferenceon Safety By Design; Recent Trends in Design &Manufacturing, ICSBD-2013, Pallakad, Kerala,August 16-17, 2013

Alphonsa, J., Aniket , J., Ghanshyam, J.,Mukherjee, S. and Raja, V.S.“Effect of Temperature on the Corrosion ResistanceProperties of A-286 Precipitation Hardening StainlessSteel After Plasma Nitrocarburising Process”,International Corrosion Prevention Symposium forResearch Scholars (CORSYM-2014). Mumbai, India,February 2014.

Alur Rajeev, Antoine Durand-Gasselin, TrivediAshutosh“From Monadic Second-Order Definable StringTransformations to Transducers”, LICS 2013, pp. 458-467, 2013.

Alur Rajeev, Vojtech Forejt, Moarref Salar andTrivedi Ashutosh“Safe schedulability of bounded-rate multi-modesystems”, HSCC 2013, pp. 243-252, 2013.Ambekar A., Bhangale R., Dukale A., ChowdhuryA., Challa S. and Radhakrishna D.“Spray Combustion of Isopropyl Nitrate and DibutylSebacate Blends,” Proceedings of the 9th Asia-Pacific Conference on Combustion, Gyeongju, 2013,Korea.

Ambekar A., Bhangale R., Dukale A., Gandhi R.,Chowdhury A., Challa S. and Radhakrishna D.“Ignition and Combustion of Nitromethane Sprays,”49th AIAA/ ASME/ SAE/ ASEE Joint PropulsionConference & Exhibit, 2013, San Jose, 2013, CA.

Ambekar A., Mallick L., Gandhi R., Chowdhury A.,Challa S. and Radhakrishna D.“Burn Rate Characterization of Iso-propyl NitrateBlends: Part I,”49th AIAA/ASME/SAE/ASEE JointPropulsion Conference & Exhibit, 2013, San Jose,2013, CA.

“Burn Rate Characterization of Iso-propyl NitrateBlends: Part II,”49th AIAA/ ASME/ SAE/ ASEE JointPropulsion Conference & Exhibit, 2013, San Jose,2013, CA.

Anandavardhanan U. K. and Borisagar, G. H.“On the K(n)-invariants of a supersingularrepresentation of GL2(Qp),” Proc. Legacy ofRamanujan, RMS Lecture, Notes Series No. 20,2013, pp.55-75.

Andreas Krebs and Limaye Nutan“DLOGTIME Proof Systems”, in proceedings of theFoundations of Software Technology andTheoretical Computer Science, FSTTCS 2013, pp.189-200, 2013.

Andreas Krebs, Limaye Nutan, Mahajan Meena,Sreenivasaiah Karteek“Small Depth Proof Systems”, in proceedings of the38th International Symposium on MathematicalFoundations of Computer Science 2013, MFCS2013, pp. 583-594, 2013.

Aneesh, A.M., Sharma, A. and Srivastava A.“CFD Study on the Thermohydraulic Performance ofPrinted Circuit Heat Exchangers,” ISHMT-ASMEHeat and Mass Transfer Conference, 2013, IITKharagpur.

66

Anupa Nandi, Pustode, M. and Raja, V.S.“Hot Salt Stress Corrosion Cracking of TitaniumAlloys Used in Gas Turbine Engine”, InternationalCorrosion Prevention Symposium for ResearchScholars (CORSYM-2014), Mumbai, India, February,2014.

Anvesha A. and Shojaei Baghini, M.“A Versatile Rail to Rail Current ModeInstrumentation Amplifier with an Embedded Band-pass Filter for Bio-potential Signal Conditioning”,Procedings of IEEE ISQED, 2013, USA.

“A Sub-1V 32nA Process, Voltage and TemperatureInvariant Voltage Reference Circuit”, Proceedings ofInternational Conference on VLSID, 2013 (SisterConference of IEEE DAC, DATE and ICCAD).

Arapostathis, A., Borkar, V.S. and Suresh Kumar, K.“Relative value iteration for stochastic differentialgames,” Annals of ISDG, Advances in DynamicsGames, Vol. 13, 2013, pp. 3-27.

Ardhapurkar, P.M., Sridharan, A. and Atrey, M.D.“Investigations of pressure drop in capillary tube formixed refrigerant Joule Thomson Cryocooler,”Advances in Cryogenic Engineering, Anchorage,Alaska, Vol. 59A (Proc.1573), 2013, pp 155-162,USA.

Arora Neha, Harsh Kumar, Dhaliwal Jagmeet S.,Kalra Prem and Chaudhuri Parag“Improved Interactive Reshaping of Humans inImages”, WSCG 2013 Communications PapersProceedings, Plzen, Czech Republic, pp 230-238,2013.

Arun Kumar G.K., Srikant S. and Vachhani Leena“Lyapunov Function Based Steering Law forGeneralized Voronoi Diagram (GVD) Constructionby a Mobile Robot”, In Proceedings of ThirdInternational Conference on Advances in Controland Optimization of Dynamical Systems (ACODS),Vol. 3, Part I, March 2014.

Arunkumar, R. and Jothiprakash, V.Sustainable Crop Planning For A Multi-ReservoirSystem Using Fuzzy Multi-Objective Approach.National Conference on Sustainable WaterResources Development and Management(SWARDAM-2013), Government College ofEngineering, Aurangabad, 2013, pp 236-242.

“Optimizing Reservoir Operation Using HybridChaotic Genetic Algorithm,” Research Scholar andAlumni Symposium (RSAS-2014), during March 7–8, 2014 held at Indian Institute of TechnologyBombay, Mumbai, Maharashtra, p. 59.

“Deriving Optimal Crop Planning for the CommandArea of Dimbhe Reservoir, Maharashtra,” XVIII

Conference on Hydraulics, Water Resources,Coastal and Environmental Engineering (HYDRO2013 INTERNATIONAL), December 4-6, 2013,Department of Ocean Engineering, IIT Madras, India,pp. 1285-1293.

“Deriving Optimal Crop Planning for the CommandArea of Dimbhe Reservoir– A Fuzzy Multi-ObjectiveApproach,” International Conference on Advancesin Water Resources Development and Management(AWRDM-2013), Centre of Advanced Study,Department of Geology, Panjab University, October23-27, 2013, Chandigarh.

Arya, S.B., Raja, V.S. and Tiwari, A.N.“EIS study and Role of Surface Finish on theElectrochemical Corrosion Behavior of HighNitrogen, High Mn and Ni free Austenitic StainlessSteels in 3.5 wt. % NaCl Solution”, NMD-ATM 2013,Varanasi, 2013.

Asok, A., Kulkarni, A.R. and Gandhi, M.N.“Microwave Accelerated One-Minute Synthesis ofLuminescent Zno Quantum Dots”. AIP ConferenceProceedings, 1512, pp. 404-405, 2013.

Athalye Chirayu, Pillai Harish and PalDebasattam“Complete Characterization of the Set of LyapunovFunctions for the Autonomous System dotx = -x,”11th IEEE International Conference on Control &Automation, Taipei, Taiwan, July 2014.

Athawale, P., Hariprasad, K., Vinod, S. and Bhartiya,S.“Optimal operating strategies for SMBC”, IFACProceedings Volumes (IFAC-PapersOnline), 10(PART 1), 2013, pp. 457-462.

Avick, S., Balasubramanian, S. andGopalakrishnan, S.“Numerical study of dynamics of spray formed by amultiphase jet,” Proceedings of the Fortieth NationalConference on Fluid Mechanics and Fluid Power,2013, NIT Hamirpur.

Awakash Kumar, Patil, R.S, and Dikshit, A.K.“Variation in Vehicular Pollution with Time Period,”International Conference on Science andTechnology (ICST2K14) organized by S.B. PatilCollege of Engineering, Indapur, February 21-23,2014.

Awate S.P., Jeeva, B., Chowdhury, A. andSreedhara, S.“Numerical Investigations of HCCI Combustion,” 3rdNational Conference on IC Engines and CombustionSVNIT, 2013, Surat, Gujrat.

Awate S.P., Jeeva, B., Trivedi, S., Chowdhury, A.and Sreedhara, S.“Homogenization of Gasoline Spray,” 23rd National

67

Conference on IC Engines and Combustion SVNIT,Surat, 2013, Gujrat.

Baburaj, P. and Bandyopadhyay, B.“Discrete-time flow control for connection-orientedcommunication network via reduced model”, 11thIEEE International Conference on IndustrialInformatics (INDIN), 2013, Bochum, Germany, July2013, pp. 618-623.

Baburaj, P., Bandyopadhyay, B. and BartoszewiczAndrzej‘‘Multivariable approach to bandwidth sharing in amulti-source connection-oriented network withheterogenous delays”, 3rd International Conferenceon Advances in Control and Optimization ofDynamical Systems (ACODS), Kanpur, India, March2014, pp. 564-570.

Baburajan P.K., Bisht Govind Singh, GaikwadAvinash, J. and Prabhu, S.V.“Experimental Study On Chf In Horizontal ChannelsUnder Flow Decay Conditions,” 40th Nationalconference on Fluid Mechanics and Fluid Power,NIT Hamirpur, 2013, India.

Bailoor, S., Soti, A.K., Bhardwaj, R. and Nguyen,T.D.“Effectiveness of Eye armor during blast loading,”Proceedings of the ASME 2013 Summer BioengineeringConference, Sunriver, Oregon, 2013, WA.

Bajoria Kamal and Jadhav Priyanka“Stability Analysis of Thick Piezoelectric FGMPlate”, Proceedings of 16th InternationalConference on Computational Methods andExperimental Measurements (CMEM 2013),Corunna, Spain, July 2-4, 2013.

Bajpai, V., Kushwaha, A. and Singh, R.“Burr Formation and Surface Quality Ii High SpeedMicromilling of Titanium Alloy (Ti6Al4V),”University of Wisconsin, 2013, Madison.

Balaji, R and Dhivya, S.Higher order statistical analysis of wind and wave timehistories off Mumbai coastline, Proceedings ofConference on Hydraulics, Water resources, coastaland Environmental Engineering (HYDRO-2013), IITMadras, Chennai, December 4-6, 2013, pp. 258-265.

Balaji, R.“A case study on end-wall effect: The beach shape atthe end of a seawall,” Proceedings of the NationalConference of Ocean Society of India (OSICON-2013): Role of Oceans in Earth System, IndianInstitute of Tropical Meteorology (IITM), Pune,November 26-28, 2013, pp. 175-177.

“Assessment of beach shape at the end of a seawall: Acase study,” Proceedings of Conference on Hydraulics,

Water resources, coastal and EnvironmentalEngineering (HYDRO-2013), IIT Madras, Chennai,December 4-6, 2013, pp. 252-257.

“Monsoon induced beach profile changes along SouthGujarat coastline,” Proceedings of 5th IndianNational Conference on Harbour and OceanEngineering (INCHOE2014), NIO, Goa, 2014, pp.204-208.

Balakrishnan, S. and Viswanadham, B.V.S.“Centrifuge model tests on geogrid reinforced soilwalls with marginal backfills,” Proceedings of 8th

International Conference on Physical Modelling inGeotechnics 2014, Perth, Australia, ChristopheGaudin & David White (Editors), CRC Press, London(Pubs.), Vol. 2, 2014, pp.1145-1151.

Balamurali A.R., Mitesh Khapra and PushpakBhattacharyya“Lost in Translation: An Empirical Study on CrossLanguage Sentiment Analysis”, 14th InternationalConference on Intelligent Text Processing andComputational Linguistics (CICLING 2013), SamosIsland, Greece, March 24-31, 2013.

Balgarkashi Ahmed, A. and Chakrabarti, S.“Study of the effect of GaAs/InGaAs capping layerson the carrier transport in GaAs/InGaAs quantum dotinfrared photodetectors,” Accepted for EMRS Springmeeting 2014.

“Study of the Impact of rapid thermal on the opticalcharacteristics of InAs/GaAs quantum dotheterostructures with GaAs and InGaAs cappinglayers,” Accepted for EMRS Spring meeting 2014.

Balijepalli V.S.K.M. and Khaparde, S.A.“Green Button standards, consumer energy usageinformation standardization, and implementationexperiences in India”, IEEE Innovative Smart GridTechnologies - Asia (ISGT Asia), 2013, pages 1-6.

Bandyopadhyay B. and Lal Priya P.S.“Periodic output feedback control for delta operatorsystems”, International Conference on ControlCommunication and Computing (ICCC),Kerala,India, December 2013, pp. 45-50.

Banerjee Biplab, Mishra Pradeep Kumar, VermaSurender and Buddhiraju Krishna Mohan“A Novel Graph Based Clustering Technique forHybrid Segmentation of Multi-spectral RemotelySensed Images”, in Advanced Concepts in IntelligentSystems, Jacques Blanc-Talon Andrzej Kasinski,Wilfried Philips Dan Popescu, Paul Scheunders (Eds.)LNCS 8192, Springer, pp. 274-285.

Banerjee Gargi, Murthy Sahana and Iyer Sridhar“Program Visualization: Effect of viewing vs.

68

responding on student learning”, InternationalConference on Computers in Education (ICCE), Bali,Indonesia, November 2013.

Banerjee, D., Adari, R., Sankaranarayan, S.,Kumar, A., Ganguly, S., Aldhaheri,R. W., Hussain,M. A., Balamesh, A. S. and Saha, D.“Electrical Spin Injection using GaCrN in a GaN basedSpin Light Emitting Diode”, Appl. Phys. Lett. 103,242408, 2013.

Bange, P. and Bhardwaj, R.“Impact of a droplet of a hydrophobic surface,”Proceedings of the 22nd National and 11thInternational ISHMT-ASME Heat and Mass TransferConference, 2013, IIT Kharagpur.

Bansal, A.“Reservoir properties of Daman Formation, SouthTapti Basin evaluated from Well Log and SeismicData,” 10th Biennial International Conference &Exposition, Society of Petroleum Geophysicist,Kochi, 2013, p.108.

Baraskar, A.A., Deb, A. and Viswanathan, G.A.“Noise propagation in series enzymatic cascades,”IFAC Proceedings Volumes (IFAC-PapersOnline), 12(PART 1), 2013, pp. 89-94.

Basumatary, A. and Momaya, K.“Exploring the Role of IITs for IndustrialCompetitiveness: Findings from an Attempt atSystematic Review of Literature”, Proceedings ofThirteenth Global Conference on Flexible SystemsManagement held at DMS, IIT Delhi, 2013, pp. 713-722.

Bellare, J.R.“Organic and aqueous dispersible tetrapods forbiosensing applications”, IEEE Sensor 2013 -Proceedings, art. no. 6688204, 2013.

Bendarkar, M.V., Pant, R.S. and Eberhardt, D.S.“Conceptual Design and Sizing of an AmphibianTransport Aircraft”, AIAA-2013-4303, Proceedingsof 2013 Aviation Technology, Integration, andOperations (ATIO) Conference and InternationalPowered Lift Conference, Los Angeles, California,August 12-13, 2013.

Beniwal, D., M. Kiran Kumar, Kain, V. and Raja,V.S.“Corrosion Behaviour of Austenitic Stainless Steelsin Nitric Acid Containing Single/Mixed Halides inTranspassive Regime”, International CorrosionPrevention Symposium for Research Scholars(CORSYM-2014), Mumbai, India, February 2014.

Bera Manas Kr. and Bandyopadhyay B.“Integral sliding mode control for GMAW systems”,10th IFAC International Symposium on Dynamicsand Control of Process Systems, Mumbai, India,2013, pp. 337-342.

Bera Manas Kr., Lal Priya P. S., BandyopadhyayB. and Paul A.K.“Discrete-time Sliding Mode Control of GMAWSystems using Infrequent Output Measurements”,European control conference (ECC), Zurich,Swizterland, 2013, pp. 3736-3741.

Bhalerao Raghavendra H. and Gedam Shirish, S.“Lunar Impact Crater Modeling Using TrinocularStereoscopic Depth Inpainting”, IEEE SecondInternational Conference on Image InformationProcessing, held at Shimla, India, December 11-13,2013.

Bhalerao Raghavendra, H., Gedam Shirish, S. andAlmansa Andrés.“Fast Epipolar Resampling of Trinocular LinearScanners Images Using Chandrayaan-1 TMC Dataset”,IEEE Second International Conference on ImageInformation Processing, held at Shimla India,December 11-13, 2013.

Bhamare, D., Gumaste, A. and Srivastava, P.“Multi-Layer Optimization for Service ProviderTransport Networks,” IEEE Local ComputerNetworks (LCN) Conference, Sydney, 2013.

Bhandakkar, A., Prasad, R.C. and Sastry, S.M.L.“Deformation Behaviour of Aluminium AlloyAA6061-10% Fly Ash Composites for AerospaceApplication”, TMS Annual Meeting, 2014, pp. 3-21.

“Processing Fracture Toughness and DamageMechanics Studies of MMC for Aerospace”, TMSAnnual Meeting, 2014, pp.185-199.

Bhangale, U. and Durbha, S, S.“Cloud Detection in Satellite Imagery using GraphicsProcessing Units”, proceedings of the IEEEInternational Geoscience and Remote SensingSymposium, Melbourne, Australia, 2013.

“Pareto Optimization for Multiobjective MatchingGeospatial Ontologies”, proceedings of the IEEEInternational Geoscience and Remote SensingSymposium, Melbourne, Australia, 2013.

Bharadwaj, R., Tripathi, R., Prabhakar, A.,Mukherji, S.Oral “S-shaped SU-8 optical wave guide immobilizedwith gold nanoparticles for trace detection ofexplosives”, Proc. SPIE 8924, Fourth Asia PacificOptical Sensors Conference, 89241W; doi:10.1117/12.2034195, September 19, 2013.

69

Bharti, B., Singh, K., Kartik, V. and Singh, R.“Design and development of a versatile high-speedmicromachining system,” International Conferenceon Precision, Meso, Micro and Nano Engineering,2013, NIT Calicut.

Bharti,V.S., Inamdar, A. B., Purusothaman, C.S.and Yadav, V.K.“CDOM- Indicator of Eutrophication in the Case-2Water of Mumbai Marine Environment”, in proceedsof ACRS2013, held in Bali, Indonesia, during October20-24, 2013.

Bhatt Darshak, Mukherjee, J. and Jean-MichelRedoute“A High Isolation Linear Folded Mixer for WiFiApplications”, ISCAS 2014, Melbourne, Australia.

Bhattacharya, A.“A Hybrid Finite Difference - Boundary IntegralMethod to solve for flow around particles,” ISHMT-ASME, 2013, IIT Kharagpur.

Bhattacherjee, D. and Viswanadham, B.V.S.“Some studies on the performance of geocompositereinforced slopes subjected to rainfall,” Proceedingsof 8th International Conference on PhysicalModelling in Geotechnics 2014, Perth, AustraliaChristophe Gaudin & David White (Editors), CRCPress, London (Pubs.), Vol. 1, 2014, pp.1153-1159.

Bhoraskar Ravi, Gabale Vijay, KulkarniPurushottam and Kulkarni Dhananjay“Importance-aware Bloom Filter for managing setmembership queries on streaming data”, COMSNETS2013, pp. 1-10, 2013.

Bhushan, A., Inamdar, M. and Pawaskar, D.“Dynamic analysis of a double-sided actuated MEMSoscillator using second-order averaging,” Proceedingsof the World Congress on Engineering, London,2013, pp 1640-1645, U.K.

Bhushan, A., Inamdar, M.M. and Pawaskar, D.N.“Dynamic analysis of a double-sided actuated MEMSoscillator using second-order averaging,” LectureNotes in Engineering and Computer Science, 3LNECS, London, 2013, pp. 1640-1645, U.K.

Bidkar, S., Gumaste, A. and Somani, A.“A Scalable Framework for Segment Routing inService Provider Networks: The OmnipresentEthernet Approach” in IEEE High PerformanceSwitching and Routing Conference (HPSR),Vancouver, Canada, July 2014.

Biswas, S. and Chakrabarti S.“Effect of Lithium Ion Implantation on the OpticalProperties of In0.15Ga0.85As Capped InAs/GaAsQuantum-Dot Heterostructures,” MRS Fall Meeting,Boston, USA.

Bo Wang, Marcel Prastawa, Avishek Saha, SuyashP. Awate, Andrei Irimia, Micah C. Chambers, PaulM. Vespa, John D. Van Horn, Valerio Pascucci,Guido Gerig“Modeling 4D Changes in Pathological AnatomyUsing Domain Adaptation: Analysis of TBI ImagingUsing a Tumor Database”, MBIA, pp. 31-39, 2013.

Bobade, R.S., Gandhi, P.S., Bhagat, N. A. and Chen,C.“Cancellation of physiological hand tremors usingcompliant robotic assist”, ASME InternationalEngineering Congress and Exposition, 2013, USA.

Bogdan Aman, Gabriel Ciobanu and ShankaraNarayanan Krishna“Solving the 4QBF Problem in Polynomial Time byUsing the Biological-Inspired Mobility”, ICDCIT2013, pp. 432-443, 2013.

Bora, A., Rao, A. and Rajendran, B.“Mimicking the worm - an adaptive spiking neuralcircuit for contour tracking inspired by C. Elegansthermotaxis,” International Joint Conference onNeural Networks, 2014.

Borkar V.S.“Reinforcement learning and matrix computations,”Proceedings of International Conference onDistributed Computing and Internet Technology,Bhubaneshwar, held on February 6-9, 2014, N. Raja(ed.), Springer LNCS No. 8337, Springer Verlag 2014,pp. 14-24.

Botcha, V. D., Singh, G., Narayanam, P. K., Sutar,D. S., Talwar, S.S., Srinivasa, R.S. and Major, S.S.“Effect of Subphase pH on Langmuir-blodgettDeposition of Graphene Oxide Monolayers on Si andSiO2/Si Substrates”, Paper presented at the AIPConference Proceedings, 1512, pp. 708-709, 2013.

Boyapati, S. , Das, D., Shojaei Baghini, M. andRedoute, J. M.“A Balanced CMOS OpAmp with High EMIImmunity”, accepted in EMC Europe, 2014, Sweden.

Brijesh P., Chowdhury A. and Sreedhara S.“Effect of Treated Exhaust Gas Recirculation on LowTemperature Combustion in CI Engines,” Proceedingsof the 9th Asia-Pacific Conference on Combustion,Gyeongju, 2013, Korea.

“Effect of Ultra-Cooled EGR and Retarded InjectionTiming on Low Temperature Combustion in CIEngines,” SAE 2013 World Congress & Exhibition,Detroit, Michigan, 2013, USA.

Brijesh, P., Chowdhury, A. and Sreedhara, S.“Reactivity controlled compression ignition forsimultaneous reduction of emissions and fuelconsumption of diesel engines,” 4th International

70

Conference on Advances in Energy Research, 2013,IIT Bombay.

“Effect of treated exhaust gas recirculation on lowtemperature combustion in CI engines,” 9th AsiaPacific Conference on Combustion, Gyeongju, 2013,South Korea.

“Effect of ultra-cooled EGR and retarded injectiontiming on low temperature combustion in CI engines,”SAE 2013 World Congress and Exhibition, Detroit,Michigan, 2013, USA.

Chakraborthy, D., Jena, S.K. and Raja, V.S.“Stress Corrosion Cracking of Precipitation Hardened(PH) Stainless Steel Weldment used in Aircraft”,International Corrosion Prevention Symposium forResearch Scholars (CORSYM-2014), Mumbai, India,February 2014.

Chakraborty Sohom and Bandyopadhyay B.‘‘On digital implementation of continuous slidingmode control”, 39th Annual Conference of theIndustrial Electronics Society, IECON 2013,Veinna,Austria, July 2013, pp. 3640-3644.

Chakraborty Supratik , Meel Kuldeep S. and VardiMoshe Y.“A Scalable and Nearly Uniform Generator of SATWitnesses”, CAV 2013,pp. 608-623, 2013

“A Scalable Approximate Model Counter”, CP 2013,pp. 200-216, 2013.

Chakraborty, S., Meel, K.S. and Vardi, M.Y.“A Scalable Approximate Model Counter”, in Proc.of International Conference on Principles andPractice of Constraint Programming (CP),September 2013.

“A Scalable and Nearly Uniform Generator of SATWitnesses”, in Proc. of International Conference onComputer-Aided Verification (CAV), July 2013, pp.608-623.

Chalanga Asif, Shyam Kamal and BandyopadhyayB.“Continuous integral sliding mode control: Achattering free approach”, 22nd IEEE InternationalSymposium on Industrial Electronics (ISIE-2013),Taipei, Taiwan, pp. 1-6, May 2013.

Chandiramani, N.K. and Motra, G.B.“Acceleration/Drift Feedback Control of MRDConnected Buildings,” Proceedings of the ASME2013 International Engineering Congress &Exposition IMECE 2013, San Diego, California,November 15-21, 2013, paper no. IMECE2013-64170,USA.

“Lateral-Torsional Response Control of MR DamperConnected Buildings,” Proceedings of the ASME

2013 International Engineering Congress &Exposition IMECE 2013, San Diego, California,November 15-21, 2013, paper no. IMECE2013-64158,USA.

Chandra Bikash, Chawda Bhupesh, Shah Shetal,Sudarshan, S. and Shah Ankit“Extending XData to kill SQL query mutants in thewild”, DBTest 2013, p. 2, 2013.

Chatterjee Kaustav and Choudhury Deepankar“Effect of damping models on dynamic response ofsingle pile”, Proceedings of Indian GeotechnicalConference, IGC-2013, Geotechnical Advances &Novel Geotechnical Applications (GANGA), IITRoorkee, Roorkee, India, ISBN: 978-81-925548-1-5, Paper ID: 5Th-06, December 22 – 24, 2013, pp. 1-10, in CD.

Chatterjee Kaustav, Rao Dilli V. and ChoudhuryDeepankar“A critical study on behavior of pile groups inliquefied soil under seismic conditions”, Proceedingsof the International Symposium on Advances inFoundation Engineering (ISAFE-2013), Singapore,Advances in Foundation Engineering, Eds. K. K.Phoon, T. S. Chua, SH. B. Yang and W. M. Cham,Research Publishing Services, ISBN: 978-981-07-4623-0, doi: 10.3850/978-981-07-4623-0 073,December 5-6, 2013, pp. 319-324.

Chaturvedi N. and Bandyopadhyay S.“Targeting Minimum Fresh Water Requirement forBatch Processes with Flexible Schedule”, inProceedings of the 6th International Conference onProcess Systems Engineering (PSE Asia 2013),Kuala Lumpur, Malaysia, June 25-27, 2013.

Chaudhari Gaurish, Avadhanula Vashisth andSarawagi Sunita“A few good predictions: selective node labeling in asocial network”, WSDM 2014, pp. 353-362, 2013.

Chaudhari Manas, Vachhani Leena and BanerjeeRangan“Towards Optimal Computation of Energy OptimalTrajectory for Mobile Robots”, In Proceedings ofThird International Conference on Advances inControl and Optimization of Dynamical Systems(ACODS), Vol. 3, Part I, March 2014.

Chaudhary, R.P., Saxena, S. and Shukla, S.“Terahertz Response of a Split Ring BasedMetamaterials”, National Conference on AdvancedMaterials, 2014.

Chaudhury, G. and Sinha, A.“Capturing a target with range only measurement”,Proceedings of European Control Conference,Switzerland, July 2013, pp. 4400-4405.

71

Chavan, R.U. , Samuel, V.P., Mallick, K. andBelur, M.N.“Optimal charging/discharging and commutativityproperties of ARE solutions for RLC circuits,”Proceedings of the Mathematical Theory ofNetworks and Systems (MTNS), Groningen, theNetherlands, 2014.

Chawla Jasvipul, Suryanarayanan Shashikanth,Sheridan John and Falzon Brian“Identification of Dynamics of Surface Suction Overan Airfoil at Low Reynolds Numbers,” ASMEInternational Engineering Congress andExposition, 2013, San Diego.

Chiplunkar Ashish and Vishwanathan Sundar“Metrical Service Systems with Multiple Servers”,COCOON 2013, pp. 481-492, 2013.

“On Randomized Memoryless Algorithms for theWeighted k-Server Problem”, FOCS, 2013.

Chirna Manoj Kumar, Gelli Ravi Kumar andKhaparde, S.A.“CIM extensions for wide area measurementsystems”, International Conference on Standardsfor Smart Grid Ecosystems Proceedings CPRI,Bangalore, March 2014, pages 71-75.

Chittora Ashish, Gupta Swapnil, R., SinghSandeep, Sharma Archana and Mukherjee Jayanta“Mode converter based on dielectric phase shift”,2014 IEEE International Power Modulator and HighVoltage Conference (IPMHVC), Santa Fe, USA.

Choudhuri D. and Sarkar S.K.“Growth Stability and Electrical Study of ZinconeFilms Deposited by Atomic and Molecular LayerDeposition”, in ICA IUMRS 2013, IISc, Bangalore,December, 2013.

Choudhury Deepankar, Chatterjee Kaustav,Phanikanth, V.S. and Kumar Ashutosh“Behaviour of piles in liquefied soil under seismicconditions”, Proceedings of the InternationalConference on “State of the Art of Pile Foundationand Pile Case Histories” PILE – 2013, Editors PaulusP. Rahardjo, Choudhury Deepankar and BudijantoWidjaja, Bandung, Indonesia, Vol. 1, 2013, pp. A5-1to A5-18.

Choudhury, P.S., Vyas, D.U. and Jadhav, G.N.“Genesis of bauxite deposits in and around Gadhsisaregion, Kutch, Gujarat, India,” proceedings ofInternational Seminar on Mineral ProcessingTechnology-2013 (MPT-2013), conducted at CSIR-IMMT, Bhubaneswar from December 10-12, 2013.Abstract Volume, p.11, Paper No.0195.

Churi Viraj, Bhagwat Gaurav and ChaudhuriParag“Directable Animation of Non-photorealistic Fluids”,GRAPP/IVAPP 2013, pp. 254-260, 2013.

“Directable Animation of Non-PhotoreaslisticFluids”, Short Paper, GRAPP 2013, Barcelona, Spain,2013.

Crasta Naveena, Ortega Romeo, Pillai Harish andJose Guadalpe Romero Velazques“The Matching Equeations of Energy ShapingControllers for Systems are not Simplified withGeneralized Forces,” 4th IFAC Workshop onLagrangian and Hamiltonian Methods for NonLinear Control, Bertinoro, Italy, August 2012.

Cyriac, R. and Rastogi, A.K.“Influence of Aquifer Heterogeneity, Anisotropy,Dynamic Recharge and Time Variant Pumping onGroundwater Flows,” Proceedings of Fourth NationalConference on Emerging Vistas of Technology in 21st

Century, at Parul Institute of Technology, Vadodara,May 10-11, 2013, pp. 169 – 178.

Dahiya, D. and Baskar, S.“A fast method for an anisotropic eikonal equationwith application to sonic boom propagation inatmosphere,” in the Proceedings on Indo-FrenchConference on Acoustics 2013.

Daingade, S., Borkar, A., Sinha, A. and Arya, H.“Study of Target Centric Cyclic Pursuit for MAVsusing Hardware In Loop Simulator”, Proceedings ofAIAA Science and Technology Forum andExposition, MD, USA, doi: 10.2514/6.2014-1345,January 2014.

Damani Om P. and Ghonge Shweta“Appropriately Incorporating Statistical Significance”,in PMI. EMNLP 2013, pp. 163-169, 2013.

Damani Om P.“Improving Pointwise Mutual Information (PMI) byIncorporating Significant Co-occurrence”, 17thConference on Computational Natural LanguageLearning, CoNLL 2013.

Das S.B., Harikrishnan, G., Roy R.N. andSreedhara, S.“Numerical Simulation of a Bluff-Body flame usingOpenFoam,” 23rd National Conference on ICEngines and Combustion SVNIT, Surat, 2013, Gujrat.

Date, A.W.“Modeling CTARA Experimental Wood Burning CookStove,” 23rd National Conference on IC Engines andCombustion,SVNIT, Surat, 2013, Gujrat.

Date, P. P.“Strain Distribution Based Failure Prediction in SheetMetal Components: Some Examples,” International

72

Deep Drawing Research Group Conference, Paris,June 2014, 2013, France.

Date, P.P. and Marathe, P.B“On the Design of A Multistage Process in DrawnSheet Metal Products using Strain Distribution BasedParameters,” International Deep Drawing ResearchGroup Conference, Zurich, June 2013, Switzerland.

Date, P.P. and Singhal, M.“A New Design of Electro-Magnetic Actuator forElectro-Magnetic Deep Drawing (EMDD) ofAxisymmetric Shells” International Deep DrawingResearch Group Conference, Zurich, June 2013,Switzerland.

De, A., Bhadeshia, H.K.D.H. and Deb Roy, T.“Friction Stir Welding of Mild Steel - Tool Durabilityand Steel Microstructure,” Adventure in the PhysicalMetallurgy of Steels (APMS), Christ College,Cambridge University, 2013, UK.

Deo Rinki, Manickam Surendar, Rao, Y. S. andGedam Shirish S.“Evaluation of interferometric SAR DEMs generatedusing TanDEM-X data”, Proc. IGARSS 2013 (IEEEGeosci. & RS society), Melbourne, 2013, pp. 2079-2082.

Desai Dhawal and Nanthagopalan Prakash“Potential Use of Industrial By-Products for DevelopingHigh Strength Concrete Under Normal CuringConditions,” Proceedings of the International Civiland Infrastructure Engineering Conference (ISBN978-981-4585-02-6) Springer, Edited by Hassan, R.,Yusoff, M., Ismail, Z., Amin, N.M., Fadzil, M.A.,Kuching, Sarawak, Malaysia, 2013, pp.215 -223.

Desai N.B., Bandyopadhyay S., Nayak J.K.,Banerjee R. and Kedare S.B.“Simulation of 1MWe solar thermal power plant”, inProceedings of Solar World Congress, InternationalSolar Energy Society, Cancun, Mexico, November 3-7, 2013.

Desai Sarika S. and Choudhury Deepankar“Deterministic seismic hazard scenario for Mumbaicity”, Proceedings of Indian GeotechnicalConference, IGC-2013, Geotechnical Advances &Novel Geotechnical Applications (GANGA), IITRoorkee, India, ISBN: 978-81-925548-1-5, Paper ID:5Th-03, December 22- 24, 2013, pp. 1-6, in CD.

Deshmukh, N., Gothwal, J., Sharma, S.D. andKumar Sudarshan“Study of combustion instability with premixed flameconfined in a tube,” 40th National conference on fluidMechanics and Fluid Power, National Institute ofTechnology Hamirpur, India, December 12-14, 2013.

Deshmukh, S., Lashkare, S., Rajendran, B. andGanguly, U.“I-NPN: A sub-60mV/decade, sub-0.6V selectiondiode for STTRAM,” Device Research Conference,2013.

Deshpande Shailesh, Inamdar Arun B. andHarrick Vin.“Discrimination of Vegetation-Impervious SurfaceSoil Classes in Urban Environment UsingHyperspectral Data”, in proceeds of ACRS2013, heldin Bali, Indonesia, during October 20-24, 2013.“Overview of Hyperspectral Remote Sensing ofImpervious Surfaces in Urban Environment” , F. Bianet al. (Eds.): GRMSE 2013, Part I, CCIS 398, 2013.© Springer-Verlag Berlin Heidelberg, 2013, pp. 128–140.

Deshpande, P.C., Hiremath, A.M., Kalbar, P.P. andAsolekar, S.R.“Towards Green Ship Dismantling: ScientificAssessment of Health, Safety and EnvironmentAgenda,” in the Proceedings of the InternationalConference on Ship Recycling SHIPREC2013 –Malmö, Sweden, April 7-9, 2013.

Deshpande, S.S. and Patwardhan, S.C.“Computationally efficient globally linearizingcontrol of a CSTR using nonlinear black box models”,IFAC Proceedings Volumes (IFAC-PapersOnline), 10(PART 1), 2013, pp. 221-226.

Deval Animesh and Dikshit A.K.“Construction, Working and Standardization ofMicrobial Fuel Cell,” 4th International Conferenceon Environment and Sustainable Development(ICESD2013), Dubai, January 19-20, 2013.

“Harvesting Energy from Anaerobically DigestedDistillery Wastewater through Microbial Fuel Cell”,International Conference on Science andTechnology (ICST2K14) organized by S.B. PatilCollege of Engineering, Indapur, February 21-23,2014.

Deval, Animesh, Bhagwat, A.M. and Dikshit, A.K.“Effect of Antifoam on the Efficiency andSustainability of Microbial Fuel Cell Fed onAnaerobically Digested Distillery Wastewater”,National Symposium on Multidisciplinary Researchin Biomedical and Applied Sciences, NMIMSUniversity, Mumbai, November 11-12, 2013.

Devanuj and Joshi, A.“Technology Adoption by ‘Emergent’ Users - TheUser-Usage Model,” Proceedings of APCHI, 2013.

Dhuley, R.C. and Atrey, M.D.“Transient phenomena in a low coolingThermoacoustic refrigerator,” Advances in

73

Cryogenic Engineering, Anchorage, Alaska, Vol. 59A(Proc.1573), 2013, pp. 776-782, USA.

Diamante J., Tan R., Foo D., Ng D., Aviso K. andBandyopadhyay S.“Unified Graphical Pinch Approach for Targeting ofCCS Systems Over Multiple Time Periods”, inProceedings of the 6th International Conference onProcess Systems Engineering (PSE Asia 2013),Kuala Lumpur, Malaysia, June 25-27, 2013.

Diwakar Anita, Poojary, S., Rokade, R., NoronhaSantosh and Kannan Moudgalya“Control systems virtual labs: Pedagogical andtechnological perspectives,” in IEEE Multi-Conference on Systems and Control, Hyderabad,India, August 28-30, 2013.

Dixit, S., Inamdar, M.M. and Pawaskar, D.N.“Effect of surfaces on thermoelastic damping ofnano-resonators,” Proceedings of SPIE - TheInternational Society for Optical Engineering, 8923,art. no. 89231U, Melbourne, 2013, Australia.

Doiphode, R., Kulkarni, R., Murty, S.V.S.N.,Prabhu, N. and Kashyap, B.P.“Effect of Severe Caliber Rolling on SuperplasticProperties of Mg-3Al-1Zn (AZ31) Alloy”, MaterialsScience Forum, 735, 2013, pp. 327-331.

Doiphode, R., Murty, S.V.S.N., Prabhu, N. andKashyap, B.P.“Effect of High Temperature Caliber Rolling onMicrostructure and Room Temperature TensileProperties of Mg-3Al-1Zn (AZ31) Alloy”, Diffusionand Defect Data Pt. B: Solid State Phenomena, 209,2014, pp. 6-9.

Dongre, G., Singh, R., Joshi, S. S.“Modeling of Silicon Ingot Slicing via Wire-EDM,”Proceedings of NAMRI, University of Wisconsin,2013, Madison.

Dutta, D. S. and Bahadur, D.“Optical Properties and Defect Related Measurementof SnO2 Cauliflower”, AIP Conference Proceedings.1512, 2013, pp. 1046-47.

Dutta, S. and Mandal, J.N.“Feasibility study on waste plastic water bottles asencasements of stone columns for groundimprovement,” Design and Practice of Geosynthetic-Reinforced Soil Structures, Bologna, Italy, October14-16, 2013, pp.379-388.

Eldho T.I.“Modeling of in situ Bioremediation Using MeshfreePoint Collocation Method (PCM)”, Proceedings ofInternational Conference on Water Technologies &Renewable Energy, 92nd OMICS Group Conference,(Abstract Vol.), Mumbai, 2013, India.

“Simulation of Hydrologic Processes for IntegratedWatershed Management Using Computer Models, GIS& Remote Sensing”, Proceedings of Indo-MexicanWorkshop on Sustainable Water & Waste WaterManagement, (Abstract Vol.), July 25-26, 2013,NEERI, Nagpur, India.

“Water Resources of India – An Overview”,Proceedings on DAAD International GAWNSeminar, IIT Bombay, October 20-27, 2013, pp. 1-8,Mumbai.

“Groundwater Contamination Problems andRemediation”, Proceedings of Indian WaterCongress, Abstract Volume, February 7-8, 2014,Anand, Gujarat.

Eldho T.I. and Kulkarni A.T.“Coastal Urban Flood Modelling Using NumericalMethods and Geo-spatial Technologies”, Proceedingon DAAD International GAWN Seminar, IITBombay, October 20-27, 2013, pp. 88-95, Mumbai.

Eleanor Wong, Suyash P. Awate, P. and ThomasFletcher“Adaptive Sparsity in Gaussian Graphical Models”,ICML , Vol.(1), pp. 311-319, 2013.

Enagandula, Gangadhar, Varsha Apte, and BipulRaj.“Request Success Rate of Multipathing I/O with a DualStorage Controller,” in International Symposium onSoftware Reliability Engineering, (ISSRE),November 2013.

Fathima, T. A. and Jothiprakash, V.“Behavioural Study of Pan Evaporation Time Series-a Chaotic Approach,” 35th IAHR World Congress,Chengdu, China, September 8-13, 2013. Paper ID:A11847.

Francis Udenta, C., Jha Manoj, K., MishraSabyasachee and Maji Avijit“Strategies to Improve the Efficiency of a MultimodalInterdependent Transportation System in Disasters,”Procedia-Social and Behavioral Sciences, Vol.104,2013, pp. 805-814.

“Disaster Management for Urban Commute in aMultimodal Transportation Context,” inTransportation Research Board 93rd AnnualMeeting, 2014, no. 14-5370.

Gabale Vijay, Mehta Rupesh, Patani Jeet,Ramakrishnan, K. and Raman Bhaskaran“Deployments made easy: Essentials of managing a(rural) wireless mesh network”, ACM DEV 2013, p.10, 2013.

Gade, S. and Joshi, A.“Human-in-Loop Hierarchical Control of Multi-UAVSystems”, Proceedings of 9th International

74

Conference on Intelligent Unmanned Systems,Jaipur, India, September 25-27, 2013, p. 109.

“Heterogeneous UAV Swarm System for Target Search inAdversarial Environment”, Paper ID: IS 13, ICCC 2013,The Residency Tower, Thiruvananthapuram, India, duringDecember 13-15, 2013.

Gahadi, H., Adhikary, S. and Chakrabarti, S.“One order enhancement of detectivity in verticallycoupled quaternary capped InAs/GaAs quntum dotinfarred photodetectors,” Accepted for ISCS 2014Montpellier, France.

Gajbhiye Sneha and Banavar R. N.“Local equilibrium controllability of a spherical robotactuated by a pendulum”, Proceedings the IEEEConference on Decision and Control, Florence, Italy,December 2013, pp.1616-1621.

Gajra, K. and Pant, R. S.“SoPTAS: Solar Powered Tethered Aerostat System”,Proceedings of 1st International Conference on Non-Conventional Energy (ICONCE 2014), Kalyani, WestBengal, January 16-17, 2014.

Gajrani Jyoti, Majumdar Pooja, SharmaSampreet and Menezes Bernard“Challenges in Implementing Cache-based SideChannel Attacks on Modern Processors”, 27thInternational Conference on VLSI Design and 13thInternational Conference on Embedded Systems,Mumbai, January 5 – 9, 2014.

Gandhi P. S. and Bhole K.S.“Fabrication of Controlled Varying Depth 3DMicrostructures using Bulk Lithography”, NationalConference on Micro and Nano Fabrication, CMTI,2013, Bangalore.

“Fabrication of Controlled Varying Depth 3DMicrostructures using Bulk Lithography”, NationalConference on Micro and Nano Fabrication, 2013,Bangalore.

Gandhi P.S.“A novel Microstereolithography (MSL) and BulkLithography (BL) technology for polymer/ceramicMEMS,” Sixth ISSS National Conference on MEMS,Smart Materials, Structures and Systems,R&DE(Engrs), 2013, Pune.

Gandhi, P.S., Bobade, R.S. and Chen, C.“On the novel compliant remote center mechanism,”International and National Conference onMachines and Mechanisms, 2013, IIT Roorkee.

Gandhi, S., Jain, J. , Shojaei Baghini, M., andMukherjee Soumyo“Comparing Stress Markers Across Various Cohorts

in a Mobile Setting”, Proc. Of IEEE EMBS, 2013,Japan.

Gaonkar, A. K. and Kulkarni, S. S.“Model order reduction of nonlinear transient heattransfer finite element model,” InternationalConference on Computer Aided Engineering, IITMadras, 2013, Chennai.

Garg Jugal, Mehta Ruta, Sohoni Miling, A. andVishnoi Nisheeth K.“Towards Polynomial Simplex-Like Algorithms forMarket Equilibria”, SODA 2013, pp. 1226-1242,2013.

Garg, T., Kulkarni, A.R. and Venkataramani, N.“Influence of PbTiO3 Addition on Microstructure of(1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 Ceramics”, AIPConference Proceedings,1536, 2013, pp. 669-670.

Gaur, S. and Khanna, A.S.“In vitro Evaluation of Degradation of Bio-DegradableSilane Based Coatings on Mg-Zn-Ca Alloy inPhysiological”, 6th International Light MetalsTechnology Conference, Windsor, London, July 24-26, 2013.

Gavankar Chetana, Vishwajeet Kumar, Yuan-FangLi and Ramakrishnan Ganesh“Enriching Concept Search across Semantic WebOntologies”, International Semantic WebConference (Posters & Demos) , pp. 93-96, 2013.

Ghabchi, R., Singh, D.V. and Zaman, M.“A Laboratory Study to Evaluate MoistureSusceptibility of Warm Mix Asphalt Using SurfaceFree Energy Method,” 2nd Conference ofTransportation Research Group of India (CTRG),Social and Behavioral Sciences, Elsevier Publisher,UK, Vol. 104, December 12-15, 2013, pp. 29–38,Agra, India.

Ghabchi, R., Singh, D.V., Zaman, M. and Tian, Q.“A Laboratory Study of Warm Mix Asphalt forMoisture Damage Potential Using Surface FreeEnergy Method,” Air Field and Highway PavementsConference, 2013, Edited by Imad L. Al-Qadi andScott Murrell, (ISBN: 978-0-7844-1300-5),Transportation and Development Institute, LosAngeles, California, 2013, USA. Doi: 10.1061/9780784413005.006

Ghadi, H., Adhikary, S., and Chakrabarti, S.“A Detailed Investigation of the Electrical and SpectralCharacteristics of Quaternary (InAlGaAs) CappedInAs/GaAs Strain-coupled Quantum Dot InfraredPhotodetectors,” Materials Research society Springmeeting, San Francisco, USA.

75

Gharat, S.H. and Khakhar, D.V.“Granular segregation in quasi-2d rectangular bin,” AIPConference Proceedings, 1542, 2013, pp. 755-758.

Ghosh S., Narasimhan K.L. and Sarkar S.K.“CuSCN / CH3NH3PbI2Cl / PCTDA InverseArchitecture Semiconductor Sensitized Solar Cell”,in ICA IUMRS 2013, IISc, Bangalore, December,2013.

Ghosh, S. and Joshi, A.“Exploration of Optimal Multimodal Input Interactionfor Applications Based on Goals,” Proceedings ofAPCHI, 2013.

Ghosh, S., Joshi, A. and Tripathi, S.“Empirical Evaluation of Multimodal InputInteractions,” Proceedings of HCI International,2013.

Gopalkrishna Veni, Zhisong Fu, Suyash P. Awate,Ross T. Whitaker“Bayesian Segmentation of Atrium Wall UsingGlobally-Optimal Graph Cuts on 3D Meshes”, IPMI,pp. 656-667, 2013.

Guha Shibashis, Shankara Narayanan Krishna,Chinmay Narayan and Arun-Kumar, S.“A Unifying Approach to Decide Relations for TimedAutomata and their Game Characterization”,EXPRESS/SOS 2013, pp.47-62, 2013.

Gumaste Ashwin and Bala Murali Krishna Bheri“On the architectural considerations of the FISSION(Flexible Interconnection of Scalable SystemsIntegrated using Optical Networks) framework fordata-centers”, ONDM 2013,: pp. 23-28, 2013.

Gumaste Ashwin, Bala Murali Krishna Bheri andKshirasagar Ashwin“FISSION: Flexible interconnection of scalablesystems integrated using optical networks for datacenters”, ICC 2013 pp. 3963-3968, 2013.

Gumaste, A. and Bidkar, S.“On the Scalability of the FISSION: FlexibleInterconnection of Scalable Systems using IntegratedOptical Networks Framework,” AsiaCommunications and Photonics Conference, Beijing,China, November 2013.

Gupta, I., Ashraf, K., Paul, S. and Singh, R.“Characterization of micro-scale pre-placed powdercladding via fiber laser,” International Conferenceon Precision, Meso, Micro and Nano Engineering,2013, NIT Calicut.

Gupta, S., Soni, G. and Singh, R.“Micro-Macro Approach for Predicting LocalizedStress Distribution in Composites,” 19th

International Conference on Composite Materials,at Montreal, 2013, Canada.

Gupta,H. S., Kumar, A.S.K., Chakrabarti, S., Paul,S., Parmar, R.M., Shamudraiah, D.R.M., ShojaeiBaghini, M. and Sharma, D. K.“Efficient Implementation of High Performance Readout Integrated Circuit”, Accepted in IEEE EDSSC,2014, China.

Guruprasad, P. J.“Role of dimensional and microstructural lengthscales in crystal plasticity”, Workshop on Behaviorof Materials at Small Length Scales”, Coorg, India,2013.

Guruprasad, P. J. and Benzerga, A.A.“Characterizing resolution-dependent geometricallynecessary dislocation density from computationaldislocation dynamics”, 23rd International Workshopon Computational Mechanics of Materials, NationalUniversity of Singapore, Singapore, 2013.

Hakimelahi, A., Krishna Rao, K.V. and Dhingra,S.L.“Travel Demand Estimation and its relation to FuelConsumption Base: A Case Study of Shiraz City”, 13th

World Conference on Transport Research, Reo deJaneiro, July 15-18, 2013, Brazil.

Hande, V. G. and Shojaei Baghini, M.“Trimless, PVT Insensitive Voltage Reference usingCompensation of Beta and Thermal Voltage”,Proceedings of International Conf. on VLSID, 2014,(Sister Conf. Of IEEE DAC, DATE and ICCAD), India.

“Design of Voltage Reference with Low Sensitivityto Process, Supply Voltage and TemperatureVariations”, Proc. of IEEE MWSCAS, 2013, USA.

Hande, V. G., Gupta, P. and Shojaei Baghini, M.“Ultra Low-Supply Voltage Reference Generator withLow Sensitivity to PVT Variations”, Proc. of IEEEASQED, 2013, Malaysia.

Hariprasad, K. and Bhartiya, S.“A dual-terminal set based robust tube MPC forswitched systems”, IFAC Proceedings Volumes (IFAC-PapersOnline), 10 (PART 1), 2013, pp. 93-98.

Harish, N., Balasubramanian, S., Yadav, S. and Das,A.“Experimental study of jets and plumes in stratifiedenvironment,” Proceedings of the Fortieth NationalConference on Fluid Mechanics and Fluid Power,2013, NIT Hamirpur.

Hebsur, A. V., Muniappan, N., Rao, E. P. andVenkatachalam, G.“Simulation of close range remote sensing ofsubsurface features using GPR for urban utility

76

information system development”, SPIE 8893, EarthResources and Environmental Remote Sensing/ GISApplications IV, Dresden, September 23-26, 2013,pp. 889307, Germany. doi:10.1117/12.2028957URL:http://dx.doi.org/10.1117/12.2028957

Hengade N.V, Eldho T.I. and Ghosh Subimal“Rainfall Runoff Modeling of A Large Catchment – ACase Study of Upper Godavari River Basin”,Proceedings of International Conference onHydraulics, Water Resources, Coastal &Environmental Engineering (HDROInternational-2013), IIT Madras, December 4-6, 2013, Chennai.

Henning, A.K. and Rajendran, B.“B. Cronquist and Z. Or-Bach. Thermal Considerationsfor Monolithic Integration of Three-DimensionalIntegrated Circuits,” IEEE SOI-3D-SubthresholdMicroelectronics Technology Unified Conference,2013.

Hiremath, A.M., Pandey S.K., Kumar, D. andAsolekar, S.R.“Ecological Engineering, Industrial Ecology and Eco-industrial Networking Aspects of Ship RecyclingSector in India” in the Proceedings of 5th InternationalConference on Environmental Science andDevelopment held during February 19-21, 2013,Singapore.

Hiremath, A.M., Pandey, S.K., Salve, A.B. andAsolekar, S.R.“Integrated Risk Assessment Framework for ShipRecycling Sector,” Proceedings of the InternationalConference on Ship Recycling SHIPREC2013 –Malmö, Sweden, April 7-9, 2013.

Hiremath, A.M., Salve, A.B., Pandey, S.K. andAsolekar, S.R.“Comprehensive Account on Dismantling &Recycling of an Oil Tanker Ship in Alang, India”Proceedings of the International Conference on ShipRecycling SHIPREC2013 - Malmö, Sweden, April7-9, 2013.

Hokayem, P., Chatterjee, D. and Lygeros, J.“Chance-constrained LQG with bounded controlpolicies”, Proceedings of the IEEE Conference onDecision & Control, December 2013, pp. 2471-2476.

Hossain, N., Singh, D.V. and Zaman, M.“Dynamic Modulus-Based Field Rut PredictionModel From an Instrumented Pavement Section,”2nd Conference of Transportation Research Groupof India (CTRG), Procedia - Social and BehavioralSciences, Elsevier Publisher, UK, Vol. 104, December12-15, 2013, pp. 129-138, Agra.

Inamdar Arun, B., Aragade S.R. and Murthy Raj.“Challenges in IWRM & ICM Planning for Coastal

Cities: Coastal Maharashtra Experience”, in proceedsof IWRM 2014, Volume II, Allied Publishers, NewDelhi, 2014 pp.1137-1144.

Jadhav, G.N. and Mukherjee Onkar“Ore petrology of the Iron ores deposits and the associatedquartz veins of Pale and Bimbol Iron-ore mines of Goa,India,” International Seminar on Sedimentary Processesand Metallogeny through time(SPMT)-2014 at SDMcollege of E&T, Dharwad, Karnataka, January 21-23, 2014.Abstract Volume p.29.

Jadhav, G.N. and Routray Prabir Ranjan“Ore petrology of the Iron ores of the Khondbondmine, Keonjhar, Odissa, India,” International Seminaron Sedimentary Processes and Metallogeny throughtime(SPMT)-2014 at SDM college of E&T ,Dharwad,Karnataka, January 21-23, 2014, Abstract Volumep.28.

Jain, A., Shashikanth, K., Ghosh Subimal andMukherjee, P.P.“Projecting Wind Energy potential Under ClimateChange With Ensemble of Climate ModelSimulations,” AGU Fall Meeting 2013, San Francisco,USA.

Jayaraj, V., Wangikar, P.P. and Jadhav, S.“Microfluidic device optimization for cell growth”,Proceedings - Winter Simulation Conference, art. no.6465983, 2013, pp. 157-159.

Jayasankar T., Eldho T.I. and Ghosh Subimal“Numerical Modeling of Tidal Hydrodynamics &Storm Surge for Mumbai Coastal Region”,Proceedings of International Conference onHydraulics, Water Resources, Coastal &Environmental Engineering (HDRO International-2013), December 4-6, 2013, IIT Madras, Chennai,India.

Jayasankar, S. and Chakraborty, S.“Improving Approximate Reachability by DynamicInterleaving of Projections-based Heuristics”, inProc. of IEEE Conference on Computer-AidedControl System Design (CACSD), August 2013, pp.25-30.

Jean-Vivien Millo, Ramesh, S., ShankaraNarayanan Krishna and Narwane Khandu Ganesh“Compositional Verification of Software ProductLines”, IFM 2013, pp. 109-123, 2013.

Jena, A.K., Mohanty, S.P., and Bhargava, P.“Effect of Sintering Profiles on Titania InterparticleConnectivity, Electron Transport and InterfacialResistance in Dye-Sensitized Solar Cells”, MaterialsScience Forum, 771, 2014, pp. 143-157.

77

Jhalak, Pustode, M. and Raja, V.S.“Hot Salt Stress Corrosion Cracking Behavior ofInconel 718 Alloy”, International CorrosionPrevention Symposium for Research Scholars(CORSYM-2014), Mumbai, India, February 2014.

Jilte R.D., Kedare S.B. and Nayak J.K.“Investigation on convective heat losses from solarcavities under wind conditions”, in Proceedings ofthe Solar World Congress, International SolarEnergy Society, Cancun, Mexico, November 3-7,2013.

Joglekar D. M. and Mitra, M.“Frequency Domain Analysis of UnsymmetricPiecewise Linear Oscillator Representing a SwitchingCrack in Beams”, Asia-Pacific Conference on Non-Destructive Testing, Renaissance Convention Center,Mumbai, November 2013.

John Ajith K. and Chakraborty Supratik“Extending Quantifier Elimination to LinearInequalities on Bit-Vectors”, TACAS 2013, pp. 78-92, 2013.

Joshi K., Ganesh V. and Chowdhury A.“Spray Characterization and PerformanceOptimization of a Diesel Engine fuelled by KaranjaStraight Vegetable oil,” Proceedings of the 9th Asia-Pacific Conference on Combustion, Gyeongju, 2013,Korea.

Jothiprakash, V. and Arunkumar, R.“Soft Computing Techniques in ReservoirOptimization,” National Conference on SustainableWater Resources Development and Management(SWARDAM-2013), Government College ofEngineering, Aurangabad, 2013, pp 273-282.

Jugade, S.C., Pal, D., Kalaimani, R.K. and Belur,M.N.“Stationary trajectories, singular Hamiltonian systemsand ill-Posed interconnection,” Proceedings of theIEEE European Control Conference (ECC), Zurich,Switzerland, pages 1740-1745, 2013.

Juneja, A.“Rehabilitation of Nivsar yard”, 18th Southeast AsianGeotechnical Conference, Singapore (Leung, Goh andShen eds.), Research Publishing, 2013, pp.549-554.

Juneja, A. and Hrudya, C.S.“Modelling of railway track subjected to high speedtrain loading”, Indian Geotechnical Conference,Roorkee, (Singh, M. ed.), available on CD, 2013, pp.1365-1371.

Juneja, A. and Shimna, M.“Soil deformation in kaolin clay using PIV”, IndianGeotechnical Conference, Roorkee, (Singh, M. ed.),available on CD, 2013, pp. 515-521

Kachhia, J., Shereef, R.M. and Khaparde, S.A.Operation and tariff for composite PV-batterysystem,” IEEE India Conference (INDICON),December 2013, pp. 1-6.

Kadali B.R. and Vedagiri, P.“Effect of Vehicular Lanes on Pedestrian GapAcceptance Behaviour,” 2nd Conference ofTransportation Research Group of India (2nd CTRG),Agra, India. Procedia - Social and BehavioralSciences, Elsevier B.V., Vol.104, 2013, pp.678–687.

“Modeling Pedestrian Crosswalk Level of Serviceunder Mixed Traffic Condition at Mid-BlockLocations,” 93rd Annual Meeting of TransportationResearch Board (TRB) Washington, D.C. January 12-16, 2014.

“Pedestrians’ Safety Margin (PSM) for UnprotectedRoad Crossing,” 13th World Conference onTransportation Research (WCTR), Rio de Janeiro,Brazil, July 15-18, 2013.

Kadam Kapil, Sahasrabudhe Sameer, Iyer Sridharand Kamat Venkatesh“Integration of Blender 3D in a basic computergraphics course,” in IEEE 21st InternationalConference on Computers in Education (ICCE2013), Bali, Indonesia, 2013.

Kadayinti, N., Dave, M.V., Shojaei Baghini, M. andSharma, D.K.“A Feed Forward Equalizer for Capacitively CoupledOn-Chip Interconnects”, Proceedings ofInternational Conference on VLSID, 2013 (SisterConference of IEEE DAC, DATE and ICCAD).

Kalaimani, R.K. and Belur, M.N.“Minimal controller structure for generic poleplacement,” Proceedings of the IEEE EuropeanControl Conference (ECC), Zurich, Switzerland, pages3446-3451, 2013.

Kalita Hemen, Harikrishnan V. and Aslam, M.Presented a paper on “Field Effect TransportProperties of Electrochemically prepared GrapheneQuantum Dots” in the IEEE InternationalNanoelectronics Conference (INEC) 2013 IEEE 5thInternational, pp.463-465, 2013.

Presented a paper on “High Ion/Ioff Ratio ofElectrochemically Prepared Graphene Quantum Dots”in the AIP Conference Proceeding, Vol.1536, 2013.

Kamani, K. and Sreedhara, S.“Numerical simulation of Combustion, Emission andPerformance characteristics of a Spark ignitionengine fuelled with Hydrogen,”5th World HydrogenTechnologies Convention (WHTC2013), Shanghai,2013, China.

78

Kamma Anil, Shrikanth Reddy, G., Parmar RajeshSingh and Mukherjee Jayanta“A Novel and Compact UWB Filter with ImprovedUpper Stop Band”, 15th Annual IEEE Wireless andMicrowave Technology Conference (WAMICON2014), Tampa, USA.

Kandolkar, S. S. and Mandal, J. N.“Direct Shear Tests on Stone Dust”, Proc. IndianGeotechnical Conference IGC2013, Roorkee,December 22-24, 2013, pp. 1-6.

Kandpal, M., Lahiri, B., Sharan, C.,Ostwal,V. ,Poddar, P., Apte, P., Rao Ramgopal, V.“Photoplastic Piezoelectric Cantilever Arrays:Fabrication, Characterization, and Design Aspects forSelf Powered Wireless Sensor Networks”, 10thInternational Workshop on Nano Sensing (NMC2013), May 1-3, 2013, Stanford, California, USA.

Kannan, R.I., Pathak, P. and Singh, D.N.,“Novel Techniques for Simulating and MonitoringImpact of Contaminants on Geoenvironment”,International Symposium on Coupled Phenomenonin Environmental Geotechnics (CPEG 2013), Turin,Italy, Manassero et al. (Edts.), Tylor & Francis Group,2013, pp. 593-598.

Kant, T.“Higher order shear and normal deformation theoriesfor composite, sandwich, piezoelectric andfunctionally graded plates,” Plenary Lecture, inProceedings of 17th International Conference onComposite Structures (ICCS17), Porto, Portugal,June 17-21, 2013.

Karmarkar, H., Joglekar, M. and Chakraborty, S.“Improved Upper and Lower Bounds for BüchiDisambiguation”, in Proc. of International Conferenceon Automated Technology for Verification andAnalysis (ATVA), October 2013, pp. 40-54.

Kartheek N.G.R., Yadav D., Banerjee R., NayakJ.K., Bandyopadhyay S.B. and Kedare S.B.“Experiences in commissioning of a 1 MWe solarthermal power plant in Gurgaon”, in Proceedings of IVInternational Conference on Advances in EnergyResearch, IIT Bombay, Mumbai, India, December 10-12, 2013.

Karunakaran, K.P., Alain Bernard, Anjan Murmu,Yicha Zhang, Choube Harshit, Kulkarni MilindPravin, and Rana Dhirendra“Role of Post-Build Processes in AdditiveManufacturing,” 18th European Forum on AdditiveManufacturing, Paris, 2013.

Kasbekar, G.S., and Sarkar, S.“Spectrum Pricing Games with Correlated Bandwidth

Availabilities and Demands” in Proc. of InformationTheory and Applications Workshop, San Diego, CA,USA, February 2014.

“Price Competition under Uncertainty in anElectricity Market with Microgrids”, in Proc. OfGlobalSIP Symposium on Energy Harvesting andGreen Wireless Communications, Austin, Texas, USA,December 2013.

Kasbekar, G.S., Sarkar, S., Kar, K., Muthuswamy,P.K. and Gupta, A.“Dynamic Contract Trading in Spectrum Markets”,Accepted for publication as a Technical Note in IEEETransactions on Automatic Control.

Kashyap Popat, Balamurali A.R, PushpakBhattacharyya and Gholamreza Haffari“The Haves and the Have-Nots: Leveraging UnlabelledCorpora fo Sentiment Analysis”, ACL 2013, Sofia,Bulgaria, August 4-9, 2013.

Kataria N.P. and Jangid, R.S.“Seismic performance and effect of curved geometryon isolation system in horizontally curved bridge”,The 2013 World Congress on Advances in StructuralEngineering and Mechanics, Jeju, September 8-12,2013, pp. 1934-1952.

Katzenbach, R., Choudhury, D. and Chang, D.W.“General report of TC 212 Deep Foundations”,Proceedings of the 18th International Conferenceon Soil Mechanics and Geotechnical Engineering,Challenges and Innovations in Geotechnics,18ICSMGE Paris 2013, Edited by Pierre Delage,Jacques Desrues, Roger Frank, Alain Puech, FrancoisSchlosser, Paris, France, Vol. 1, September 2-6, 2013,pp. 2651-2658.

Kaur, S. and Banerjee, R.Presented a paper “Lipopolymeric nanoparticles:platform technology for aerosolized combinationchemotherapy”. Technical Proceedings of the 2013NSTI Nanotechnology Conference and Expo.Washington DC, p 411-414. Nanotech 2013.

Khanna, A.S. and Rathod, W.S.“Development of CoCrAlOY Hard Coatings andOxidation Resistance Coatings – A Comparison ofHVOF & Cold Spray”, 10th Int. Conf. on HardMaterials, ICSH. M 10, Cancun, Mexico, pp. 4-5(Extended abstract) Full Text communicated to Int.Journal of hard Materials (Elsevier), February 10-14, 2014.

Khanna, A.S.“Development of Self Cleaning Coatings for SolarPanel Application”, 5th Humboldt Kolleg on “SurfaceScience & Engineered Surfaces”, Lavasa, India,February 14-16, 2014.

79

“Nano-modified Inorganic-Organic WaterborneCoatings for Solar Panels”, International Workshopon Advanced Materials Challenges for AlternativeEnergy Solutions, AMAES, Delhi, September 15-17,2013.

“Pipeline Integrity – A Lesson Learnt from some PipeCoating Failures”. BIT’s Annual World Congress ofOcean-2013, Hangzhou, China, Abstract, pp. 437,September 23-25, 2013.

“Development of Super Hydrophobic Coatings”.Nanotech Conference & Expo 2013. Washington DC,USA, June 10-14, 2013.

“Smart Coatings, 11th International Symposium onSurface Protective Coatings”. SSPC 2014, HotelShiva, Ahmedabad, January 19-21, 2014.

“Super-hydrophobic Coatings for Self-cleaningApplications”. Int. Conf. on Emerging Materials &Processes, ICEMP 2014, CSIR Inst. of Mineral &Mater. Technology, Bhubneshwar, February 26-28,2014, pp. 22-26.

Khatri Anjali, Punjabi Nirmal, Soumyo MukherjiOral presentation “Micromolded U-shaped PDMSoptical waveguide for biosensing applications”, Proc.SPIE 8924, Fourth Asia Pacific Optical SensorsConference, 89241W; doi:10.1117/12.2031384,September 19, 2013.

Khire, M. V. and Agarwadkar, Y.“Qualitative analysis of extent and severity ofdesertification for semi-arid regions using remotesensing techniques”, International Conference onBiodiversity and Climate Change -ICBCC 2013, AbuDhabi, UAE, November 2013.

Kiran, L., Eranki, N. and Kannan M. Moudgalya“Application of puzzles to unpuzzle the programmingdifficulty through spoken tutorial workshops,” in IEEE21st International Conference on Computers inEducation (ICCE 2013), Bali, Indonesia, 2013.

“An integrated approach to build programmingcompetencies through spoken tutorial workshops,” inIEEE 5th International Conference on Technologyfor Education (T4E 2013), Kharagpur, India,December 18-20, 2013.

Kishan, D., Shojaei Baghini, M., and Sharma, D. K.“A Capacitively Coupled Clock Distribution Networkwith Correction for Process Dependent Skew”,Proceedings of IEEE ICICDT, 2013, Italy.

Kiwelekar Arvind, Joshi Rushikesh K.“Ontological Interpretation of Object-OrientedProgramming Abstractions (new)”, 13th IEEEWorking Conference on Source Code Analysis andManipulations, 2013.

Kolekar, A., Laddha, S., Suneet Singh, Ganesh, A.and Kumar Sudarshan“Development and Validation of Power PerformancePrediction Chart for Conversion of Diesel Engine toDual Fuel Engine”, SAE 2014 World Congress &Exhibition, Detroit Michigan USA April 8-10, 2014.

Kolluri, S., Bajaj, I. and Bhushan, M.“Sensor network design for efficient fault diagnosisand signed digraph update”, IFAC ProceedingsVolumes (IFAC-PapersOnline), 10 (PART 1), 2013,pp. 821-826.

Kothiyal Aditi, Majumdar Rwitajit, MurthySahana and Iyer Sridhar“Effect of think-pair-share in a large CS1 class: 83%sustained engagement,” in Proceedings of the ninthannual international ACM conference onInternational Computing Education Research (ICER2013), San Diego, USA, August 12-14, 2013.

Kottakki, K.K., Bhushan, M. and Bhartiya, S.“Nonlinear update based unscented Gaussian sumfilter”, IFAC Proceedings Volumes (IFAC-PapersOnline), 10 (PART 1), 2013, pp. 172-177.

Krishna Priya G. S., Tan R. and Bandyopadhyay S.“Emission Constrained Power System Planning withCarbon Capture And Storage”, in Proceedings of the6th International Conference on Process SystemsEngineering (PSE Asia 2013), Kuala Lumpur,Malaysia, June 25-27, 2013.

Krishna S., Guha Shibashis, Narayan Chinmay andKumar Arun, S.“A Unifying Approach to Decide Relations for TimedAutomata and their Game Characterization,” inProceedings of EXPRESS/SOS 2013, EPTCS 120,2013, pp. 47-62.

Krishna S., Millo Jean-Vivien, Ramesh, S. andNarwane Ganesh“Compositional Verification of Software ProductLines,” in Proceedings of IFM’13 , LNCS ISBN 978-3-642-38612-1, Springer, 2013, pp. 109-123.

Krishna, R., Chandra, S., Bardhan, N., Salimian,M., Yang, M., Y.Taus, E.Gracio and Bahadur, D.“Design of an Amperoometric Glucose BiosensorBased on Glucose Oxidase/Arginated Fe3O4 GlassyCarbon”, Science of Advanced Material, 5 (4), 2013,pp. 333-340.

Krishnan, A., Raja, V. S., Agrawal, R. andMukhopadhyay, A. K.“Pitting and exfoliation Corrosion of Retrogressedand Re-Aged AA7085 Sheet”, Proc. of Int. Conf.CORCON 2013 by NACE, Paper No. 13SSC11, 2013.

80

Kulkarni Ankur A. and Shanbhag Uday V.“On the Consistency of Leaders’ Conjectures inHierarchical Multi-level Games”, Proceedings of theIEEE Conference on Decision and Control, 2013.

Kulkarni Malhar and Ajhotikar Anuja“On the accent of the word parachah as stated by A6.2.52”, in the Proceedings of the 15th WorldSanskrit Conference, New Delhi, edited by GeorgeCardona, pp. 59-79.

Kulkarni Malhar, Bhingardive, S., ajotikar, T.,Kulkarni, I. and Bhattacharyya, P.“Semi-Automatic Extension of Sanskrit Wordnetusing Bilingual Dictionary”, in Proceedings of the7th Global Wordnet Conference, Tartu, Estonia, editedby Heili Orav, Christiane Fellbaum and Piek Vossen,ISBN 978–9949–32–492–7, 2014, pp. 324-329.

Kulkarni Malhar, Katdira Dipesh and DharurkarChinmay“Vat: A textual study”, in the Proceedings of the 15th

World Sanskrit Conference, New Delhi, edited byGeorge Cardona, pp. 159-177.

Kulkarni S., Deo, M.C. and Ghosh, S.“Effect of climate change on local wind conditions”,Proceedings of Conference: “Hydro-2013”, IITMadras, December 4-6, 2013, pp.1-7,Chennai.

Kulkarni, A.T. and Eldho, T.I.“Water Resources Management Using NumericalModels & Geospatial Technologies”, NationalConference on Sustainable Water ResourcesDevelopment & Management (SWRDM-2013),Aurangabad, 2013, pp. 199-208, India.

“Coastal Urban Flood Simulation Using A GIS BasedHydrological Model’, Proceedings of 46th IndianWater Works Association Annual Convention,Bangalore, January 17-18, 2014 pp 153-157, India.

Kulkarni, A.T., Eldho T.I., Rao, E.P. and Mohan,B.K.“DEM Based Approach for Modelling Coastal UrbanFloods: A Case Study, Proc. International Conferenceon Water Technologies & Renewable Energy, 92nd

OMICS Group Conference , (Abstract Vol.), 2013,Mumbai, India.

“An Integrated Flood Simulation Model for a CoastalUrban Catchment of Navi Mumbai: A Case Study”,Proceedings of International Conference onHydraulics, Water Resources, Coastal &Environmental Engineering (HDRO International-2013), IIT Madras, December 4-6, 2013, Chennai.

Kulkarni, R.R., Prabhu, N., Hodgson, P.D. andKashyap, B.P.“Kinetics of γ-Mg17Al12 Phase Dissolution and its

Effect on Room Temperature Tensile Properties inAs-Cast AZ80 Magnesium Alloy”, Diffusion andDefect Data Pt.B: Solid State Phenomena, 209,2014. pp. 207-211.

Kulkarni, S. R. and Shojaei Baghini, M.“Spiking Neural Network based ASIC for CharacterRecognition”, Proc. of IEEE ICNC, 2013, China.

Kulkarni, S.S. and Bhandakkar, T.K.“Thermo- model for inhomogeneous deformations inmetallic glasses”, International Conference onComputer Aided Engineering (CAE-2013), IITMadras, 2013, Chennai, India.

Kumar Sathish and Balaji, R.“Sea-level rise and tidal propagation in Gulf ofKhambhat, west coast of India,” Proceedings of 5thIndian National Conference on Harbour and OceanEngineering (INCHOE2014), NIO, Goa, 2014, pp.199-203.

Kumar, D., Hiremath, A.M. and Asolekar, S.R.“Integrated Management of Wastewater throughSewage Fed Aquaculture for Resource Recovery andReuse of Treated Effluents: A Case Study” in theProceedings of 5th International Conference onEnvironmental Science and Development heldduring February 19-21, 2014, Singapore.

Kumar, S. and Srivastava, A.“Heat Transfer Analysis of Lazer-Irradiated BiologicalSamples,” ISHMT-ASME Heat and Mass TransferConference, 2013, IIT Kharagpur.

Kunchukuttan Anoop, Shah Ritesh andBhattacharyya Pushpak“IIT Bombay System for CoNLL 2013 Shared Task: AHybrid Approach to Grammatical Error Correction”,CoNLL 2013, Atal Sophia, Bulgaria, August 8-9, 2013.

Kundu, S. and Viswanadham, B.V.S.“Centrifuge model tests on the performance of soil-nailed shoring system,” Proceedings of 8th

International Conference on Physical Modelling inGeotechnics 2014, Perth, Australia, ChristopheGaudin & David White (Editors), CRC Press, London(Pubs.), 2014, pp.1119-1124.

Kurte, K. and Durbha, S, S.“High Resolution Disaster Data Clustering usingGraphics Processing Units”, proceedings of the IEEEInternational Geoscience and Remote SensingSymposium, Melbourne, Australia, 2013.

Kushwaha Ajay, Kalita Hemen and Aslam, M.“Effect of Oxygen Annealing on the Surface Defectsand Photoconductivity of Vertically Aligned ZnONanowire Array” in the World Academy of Science,Engineering and Technology, Vol.74, 2013, p.274.

81

Kutubuddin Mukul, M. and Jade, S.“Dislocation modeling of co-seismic displacementsduring 2011 Sikkim earthquake, India,” proceedingsof the 2nd Annual International ConferenceGeological & Earth Sciences, GEOS. Phuket,Thailand, October 28-29, 2013, doi: 10.5176/22513353_GEOS13.21, pp. 126-131.

Lahiri, B., Kandpal, M. and Rao Ramgopal, V.“Modeling, Analysis, and Fabrication of ZnO-SU8Composite based Piezoelectric Cantilevers forEnergy Scaavenging Applications”, 0th InternationalWorkshop on Nano Sensing (NMC 2013), May 1-3,2013, Stanford, California, USA.

Lahoti, A., Jain, P., Bajoria, K. M., Dutta, S. andMandal, J. N.“Numerical Modeling of 305 m high geogridreinforced artificial mountain,” National Seminar onGeotechnique Today 2014, Kolkata, 2014, India.

Lakdawala Absar, Thaokar Rochish and SharmaAtul“Numerical Study of Breakup of a Jet into Drops inNon-Newtonian Liquid-Liquid System,” Proceedingsof 40th National Conference on Fluid Mechanicsand Fluid Power, National Institute of TechnologyHamirpur, 2013.

Lala, S., Ghosh, S. and Pujari, N.N.“Seismic fragility analysis of a nuclear primarycontainment structure,” 4th ECCOMAS ThematicConference on Computational Methods inStructural Dynamics and Earthquake Engineering(COMPDYN 2013), Kos Island, Greece, June 12-14,2013.

Lavish O., Venugopal, A., Agrawal Amit andPrabhu S. V.“Influence of after body shape on the performance ofblunt shaped bodies as vortex shedders,”International Conference on Fluid Mechanics andApplication (ICFMA), Paris, 2013, France.

Madakyaru, M. and Patwardhan, S.C.“Adaptive predictive control using GOBF-ARXmodels: An experimental case study”, IFACProceedings Volumes (IFAC-PapersOnline), 10(PART 1), 2013, pp. 99-104.

Madhusoodhanan, C.G., Eldho T.I. and Sreeja K.G.“Boundaries of Cooperation: The Multi-ScalarChallenges to Integrated River Basin Management inInclusive Basins”, Proceedings of InternationalSymposium on Integrated Water ResourcesManagement (IWRM-2014), CWRDM, February 19-21, 2014, pp. 1110-1116, Kozhikode.

Mahajan, S., Jha, A.K. and Raja, V.S.“Corrosion and Biocompatibility of Plasma SourceIon Implanted Stainless Steel”, International

Corrosion Prevention Symposium for ResearchScholars (CORSYM-2014), Mumbai, India, February2014.

Mahawar, V., Singh, K. and Singh, R.“Micromachining Characterization of Ultrathin Ni-membranes,” Proceedings of the 9th InternationalConference on MicroManufacturing, NTU, 2013,Singapore.

Mainkar, D., Gupta, T., Patel, S.C., Lehmann, B.,Diwan, P., Kaminsky, F.V., Khachatryan, G.K.“Diamonds from the Behradih kimberlite pipe, BastarCraton, India: A reconnaissance study,” inProceedings of 10th International KimberliteConference, Special Issue of the Journal of theGeological Society of India, ed. D.G. Pearson &others, Vol.1, 2013, pp. 309-316.

Majumdar Rwitajit and Iyer Sridhar“LAMP: A framework for Large-Scale Addressing ofMuddy Points,” in IEEE Fifth InternationalConference on Technology for Education (T4E 2013),Kharagpur, India, December 18-20, 2013.

Majumdar Rwitajit and Kothiyal Aditi“PULSE: A Framework for Protocol Based Utility toLog Student Engagement,” in IEEE FifthInternational Conference on Technology forEducation (T4E 2013), Kharagpur, India, December18-20, 2013.

Makwana A. B., Korada, R. and Bose, M.“Effect of dune formation on pressure drop inhorizontal pneumatic conveying system” inProceedings of International Conference on PowderGranule and Bulk Solids: Innovations andApplications (PGBSIA-2013), Thapar University,Patiala. India, 2013.

Mallick, D., Thomas, S., Cole, I. and Raja, V.S.“Corrosion Inhibitors for the Protection of AA2024Alloys, Initiation Studies using DC Potential DropMethod”, International Corrosion PreventionSymposium for Research Scholars (CORSYM-2014),Mumbai, India, February, 2014.

Mallik G. and Sinha A.“A Novel Obstacle Avoidance Control Algorithm in aDynamic Environment”, Proceedings of IEEESymposium Series on Computational Intelligence,Singapore, April 2013, pp. 57-63.

Manavalan, R., Rao, Y.S., Buddhiraju KrishnaMohan, Venkataraman, G. and Subrata, C.“Landuse/Landcover based flood area assessmentusing L- and C-band SAR data of coastal region ofAndhra Pradesh, India”, Asia-Pacific Conference onSynthetic Aperture Radar (APSAR), September 23-

82

27, 2013, pp. 253-256, INSPEC Accession No.14026526.

Mandal Bhaldar, A. and Chakrabarti, S.“Impact of Rapid Thermal Annealing in InAs/GaAsQuantum Dot Infrared Photodetectors with VaryingGrowth Pauses,” Materials Research Society Springmeeting, San Francisco, USA.

“Enhancement in Peak Detectivity (D*) by More ThanOne Order When Quaternary Alloy (InAlGaAs)Capped InGaAs/ GaAs QDIPs were Implanted withLow Energy H? ions,” Materials Research SocietySpring meeting, San Francisco.

Mandal, D., Dohare, V., Honkalaskar, V.H., Garg,A., Bhandarkar, U.V. and Sethi, V.“Evaluation of Micro Gasifier CookstovePerformance with Handmade Biomass Pellets usingRegion-Specific Fuels and Assessment ofDeployment Potential,” Proceedings of The NationalConference on Recent Advances in Bio-EnergyResearch at Sardar Swaran Singh National Instituteof Renewable Energy, Kapurthala, Punjab, India duringNovember 22-24, 2013.

Mandal, J.C.“Numerical Issues with High Speed FlowComputations”, at the Advanced Level Workshop on“Theoretical and Computational Aspects of NonlinearWaves” (TCANW-2013), Under the NationalProgram on Differential Equations: Theory,Computation and Application (NPDE-TCA), May27-31, 2013.

“Computational challenges in obtaining higher ordernon-oscillatory solutions for hyperbolic conservationlaws”, International Conference on MathematicalModeling & Computer Simulation with Applications(ICMMCSA) during December 31, 2013 – January2, 2014, IIT Kanpur, U.P., India.

Mandal, T.K., Pujari, N.N. and Ghosh, S.“A comparative study of seismic fragility estimatesusing different numerical methods,” 4th ECCOMASThematic Conference on Computational Methods inStructural Dynamics and Earthquake Engineering(COMPDYN 2013), Kos Island, Greece, June 12-14,2013.

Manik, D.N.“Statistical Energy Analysis (SEA) applications invibration and noise,” International Conference onSound and Vibration (ICSV20), 2013, Bangkok,Thailand.

Manjunatha Pruthvi, Vortisch Peter and MathewTom V.“Methodology for Calibration of VISSIM in MixedTraffic,” 92nd Annual Meeting of TransportationResearch Board, Washington D.C., January 13-17,2013.

Marisamynathan, S. and Vedagiri, P.“Modeling Pedestrian Delay at SignalizedIntersections under Mixed Traffic Condition,” 93rdAnnual Meeting of Transportation Research Board(TRB), Washington, D.C., January 12-16, 2014.

“Modeling Pedestrian Delay at Signalized IntersectionCrosswalks under Mixed Traffic Condition,” 2ndConference of Transportation Research Group ofIndia (2nd CTRG), Agra, India. Procedia - Social andBehavioral Sciences, Elsevier B.V., Vol.104, 2014,pp. 708–717.

Mashalkar Jai, Bagwe Niket and ChaudhuriParag“Personalized Animatable Avatars from Depth Data”,Joint Virtual Reality Conference of EGVE - EuroVR(JVRC) 2013, Paris, France, 2013.

Mathew, T., Munigety, C., Ashish, C. and AbhijeetO.“A space-discretization based simulation approach fornon-lane based conditions,” in Proceedings of the93rd Annual Meeting of Transportation ResearchBoard, Washington D.C., January 2014.

Mavinkurve Madhuri and Murthy Sahana“Comparing self-learning behaviour of low and highscorers with engineering design interactivevisualization,” in 21st International Conference onComputers in Education (ICCE 2013), Bali,Indonesia, November 18-22, 2013.

Medhi, I., Toyama, K., Joshi, A., Athavankar, U. andCutrell, E.“A comparison of list vs. hierarchical UIs on mobilephones for non-literate users,” Proceedings ofINTERACT 2013.

Mehta, H., Lodha, S., Ganguly, U. and Ganguly, S.“Calibration of the Density-Gradient TCAD Modelfor Germanium FinFETs” in IEEE RegionalSymposium on Micro and Nanoelectronics,Malaysia, September 2013.

Mehta, M., Reddy, G.M., Rao, A.V. and De, A.“Estimation of stresses on non-circular tool pins infriction stir welding through numerical modeling andmechanics based principles,” 66th InternationalInstitute of Welding (IIW) Annual Assembly(Commission IIIB), Essen, 2013, Germany.

Mehta,R.N., Bapat, S.L. and Atrey, M.D.“Design and Development of a Four cell Sorptioncompressor Based J T cooler using R 134a as WorkingFluid,” Advances in Cryogenic Engineering,Anchorage, Alaska, Vol. 59B (Proc. 1573), 2013, pp.1055-1062, USA.

83

Minaev,S., Maruta, K., Fursenko, R., SudarshanKumar and Mazurk, B.“Flammability limits of low Lewis number premixedflames,” 10th International conference on flowdynamics, Tohoku University, Sendai Japan,November 25-27, 2013.

Mishra A.M., Paul S., Pandey V. and Singh S.“Two-phase stability analysis of horizontal channelusing weighted residual method” in InternationalCongress on Advances in Nuclear Power Plants,April 2013.

Mishra Abhijit and Bhattacharyya Pushpak“Automatically Predicting Sentence TranslationDifficulty”, ACL 2013, Sofia, Bulgaria, August 4-9,2013.

Mishra Shitanshu and Iyer Sridhar“Problem Posing Exercises (PPE): An instructionalstrategy for learning of complex material inintroductory programming courses”, IEEEInternational Conference on Technology forEducation (T4E), Kharagpur, India, December 2013.

Mishra Shitanshu and Iyer Sridhar“Problem Posing Exercises (PPE): An instructionalstrategy for learning of complex material inintroductory programming courses,” in IEEE 5th

International Conference on Technology forEducation (T4E 2013), Kharagpur, India, December18-20, 2013.

Mishra Shitanshu and Ramesh Rekha“A software solution to facilitate moderation,observation and analysis in a focused group interview,”in IEEE Fifth International Conference on Technologyfor Education (T4E 2013), Kharagpur, India,December 18-20, 2013.

Mishra, R. K., Ganguly, U. ,Ganguly, S., Lodha, S.,Nainani, A. and Abraham, M.“Nickel germanide with rare earth interlayers for GeCMOS applications” in IEEE EDSSC, Hong Kong,June 2013.

Mitra Arijit, Kalita Hemen, MohapatraJeotikanta and Aslam, M.Presented a paper on “Electrochemical CapacitiveProperties of Mn3O4 Nanoparticles and ReducedGraphene Oxide Composite” in the AIP ConferenceProceeding, 2013. p.1536.

Mitra, S., Kulkarni, A.R. and Prakash, O.“Densification Behaviour and Two Stage MasterSintering Curve in Lithium Sodium NiobateCeramics”. Ceramics International, 39 (SUPPL. 1),pp. S65-S68, 2013.

Diffuse Phase Transition in Li0.12Na0.88 NbO3Piezoelectric Ceramics”. AIP Conference Proceedings,1512, pp. 1256-1257, 2013.

Mitra, S., Singh, M. K., Chakraborty, S. andDas Saha, S.K.“Effect of nanoparticles concentration on the coolingof heated steel surface using laminar jet,” 22ndNational and 11th International ISHMT-ASME Heatand Mass Transfer Conference, 2013, Indian Instituteof Technology Kharagpur.

Mittal, M., Bhushan, M., Patil, S. and Chaudhari, S.“Optimal feature selection for SVM based faultdiagnosis in power transformers”, IFAC ProceedingsVolumes (IFAC-PapersOnline), 10 (PART 1), 2013,pp. 809-814.

Mohammad, A.“Seismic Attribute Analysis for ReservoirCharacterization,” 10th Biennial InternationalConference & Exposition, Society of PetroleumGeophysicist, Kochi, 2013, p.119.

Mohan, M., Pal Yash, Roy, R.N., Sreedhara, S. andKumar Sudarshan“Comparison of numerical studies on lifted jet flamesin a vitiated coflow using commercial CFD codes,”40th National conference on fluid Mechanics andFluid Power, National Institute of TechnologyHamirpur, India, December 12-14, 2013.

“Comparative studies of Numerical analysis ofFlameless combustion in Fluent and CFX,” 40thNational Conference on Fluid Mechanics and FluidPower, NIT, 2013, Hamirpur.

Mohanta, P., Chaturvedi, P., Major, S.S. andSrinivasa, R.S.“Vapor-liquid-solid Growth of GaN Nanowires byReactive Sputtering of GaAs”, AIP ConferenceProceedings, 1512, pp. 698-699, 2013.

Mohapatra Hrushikesh, Jain Siddhanth,Chakrabarti Soumen“Joint Bootstrapping of Corpus Annotations and EntityTypes”, EMNLP, pp. 436-446, 2013.

Mohaptra, J.K. , Motra, A., Bahadur and Aslam,M.“Surfaced Controlled Magnetic Properties of Fe3O4Nanoparticles”, AIP Conference Proceedings. 1512,2013, pp. 318-319.

Momaya, K., Manthri, P., Basumatary A. andMittal, S.K.“IITs and Industrial Competitiveness: Findings fromBenchmarking and Problem Structuring”, Proceedingsof Thirteenth Global Conference on Flexible SystemsManagement held at DMS, IIT Delhi, 2013, pp. 697-712.

84

Motiwala, N. I., Yelve, N. P. and Pant, R. S.“Design and Fabrication of Fins for Indoor andOutdoor Airships”, Proceedings of FirstInternational Conferences on Emerging Trends inEngineering Technology, IC(ET)22013, Munnar,Kerala, October 4-5, 2013.

Mourya V. K., Shukla A. and Doolla S.“Control of grid connected Cascaded H-BridgeMultilevel Converter during grid voltage unbalancefor Photovoltaic application” Presented at IEEEIndustrial Electronics Conference, held in Vienna,November 10-13, 2013.

Muhuri, A., Dhingra, S., Bhattacharya, A. andVenkataraman, G.“Characterization of Backscattered Radar Waves fromthe Lunar Surface”, IEEE IGARSS’ 2013, Melbourne,Australia, July 21-26, 2013, pp. 17-20.

“A qualitative analysis of backscattered radar wavesfrom the lunar surface”, Asia-Pacific Conference onSynthetic Aperture Radar (APSAR), September 23-27, 2013, pp. 350-353, INSPEC Accession No.14026537.

Mujumder P. and Eldho T.I.“Groundwater Flow Modeling in Confined AquifersUsing Analytical Element Method”, Proceedings ofInternational Conference on Hydraulics, WaterResources, Coastal & Environmental Engineering(HDROInternational-2013), December 4-6, 2013,IIT Madras, Chennai, India.

Mukherjee Biswajeet, Patel Pragati andMukherjee Jayanta“A Novel Cheeseholes type Hemispherical DielectricResonator antenna for wireless applications”,European Microwave Conference 2013, Nuremberg,Germany.

Mukherjee Jayanta“A Compact Electromagnetic Band Gap GroundControlled Tunable Dual Mode Band Pass Filter”, 16thinternational symposium on antenna technologyand applied electromagnetics, 2014, Victoria,Canada.

Mukhtyar, V.A., Shastri, Y. and Gudi, R.D.“Improved stable, optimal production in gas lift wells:Exploiting additional degrees of freedom”, IFACProceedings Volumes (IFAC-PapersOnline), 10(PART 1),2013, pp. 421-426.

Munigety, C., Sruthi, M., Mathew, T. and RaoKrishna, K.V.“Analysis and Modelling of Tactical Decisions ofVehicular Lateral Movement in Mixed TrafficEnvironment,” in Proceedings of the 93rd AnnualMeeting of Transportation Research Board,Washington D.C., January 2014.

Munigety, C., Vivek V. and Mathew, T.“Semi-automated tool for extraction of microleveltraffic data from videographic survey,” in Proceedingsof the 93rd Annual Meeting of TransportationResearch Board, Washington D.C., January 2014.

Murali, P., Bhalerao, K. and Khaparde, S.A.“An integrated approach for placement of batteriesin distribution network”, IEEE India Conference(INDICON), December 2013, pages 1-6.

Murthy M.S.N., Rangwala J. and Sreedhara, S.“Numerical and Experimental Investigation of LiquidSpray Combustion in a Real Life Gas Turbine,” 23rdNational Conference on IC Engines and CombustionSVNIT, Surat, 2013, Gujrat.

Murthy Sahana and Iyer Sridhar“Guidelines and templates for planning, conductingand reporting educational technology research”,(Tutorial). IEEE Fifth International Conference onTechnology for Education (T4E 2013), Kharagpur,India, December 18-20, 2013.

Muthu Nelson, Falzon, B.Z., Maiti, S.K. andKhoddam, S.“Modeling crack propagation in particle- reinforcedcomposites using the Element-free Galerkinmethod,”19th International Conference onComposite Materials (ICCM), Montreal, July 28-August 2, 2013, Canada.

Nadaf Maheboobsab, B. and Mandal, J.N.“Experimental Studies and Analyses for BasicCharacterization of Fly Ash,” Proceedings of 4thGlobal Engineering, Science and TechnologyConference, BIAM Foundation, Dhaka, December27-28, 2013, pp. 1-11, Bangladesh.

Nadaf, R., Ijjada, M., Narayanan, J., Kutty, B.,Aswal, V.K., Bellare, J.R. and Goyal, P.S.“Structure of micelles in re-entrant phase of SDS/Al(NO3) 3 solutions”, AIP Conference Proceedings,1512, 2013, pp. 118-119.

Naduvath, J., Shaw, S., Bhargava, P. and Mallick,S.“Effect of Nanograss And Annealing Temperature onTiO2 Nanotubes Based Dye Sensitized Solar Cells”,Materials Science Forum, 771. 2014, pp. 103-113.

Nagabhushan Biliangadi and Dikshit, A.K.“Treatment of Potale Wastewater,” InternationalConference on Science and Technology (ICST2K14)organized by S.B. Patil College of Engineering,Indapur, February 21-23, 2014.

Naik, N. P. and Choudhury, D.“Site specific ground response analysis for typical

85

sites in Panjim city, Goa”, Proceedings of IndianGeotechnical Conference, IGC-2013, GeotechnicalAdvances & Novel Geotechnical Applications(GANGA), IIT Roorkee, ISBN: 978-81-925548-1-5,Paper ID: 5Th-33, December 22- 24, 2013, pp. 1-10, in CD.

Nair Soumya, Upadhyay Pulakesh and MathewTom V.“A Dynamic Offset Model based on Stop LineDetector Information,” Procedia - Social andBehavioral Sciences, ISSN 1877-0428, Vol.104,December 2, 2013, Pages 487-496.

Nampoothiri, P.K., Gandhi, M.N. and Kulkarni,A.R.“Synthesis and Characterization of NIR LuminescentLaf3:Ln3+ Nanoparticles and their Transparent EpoxyNanocomposites”, International ConferenceICMMT-2013. Advanced Materials Research. Vol.748, pp. 101-105, 2013.

Nandi D.K. and Sarkar S.K.“Mo(CO)6 as a Precursor Towards the LowTemperature Atomic Layer Deposition of Mo2S3and MoN”, in ICA IUMRS 2013, IISc, Bangalore,December, 2013.

“Atomic Layer Deposition of Molybdenum Oxide forSolar Cell Application”, in 2nd InternationalConference on Power Science and Engineering,Paris, France, 2013.

Nandi, R., Singh, D., Joshi, P., Srinivasa, R.S. &Major, S.S.“Effect of ga-doped ZnO Seed Layer Thickness onthe Morphology and Optical Properties of ZnONanorods”. AIP Conference Proceedings. 1512, pp.410-411, 2013.

Narasimha Rao Mavilla, Solanki, C.S. and Vasi, J.“Structural, optical and electrical properties of Sinanocrystals fabricated by ICPCVD for nextgeneration photovoltaics,” 39th IEEE PhotovoltaicSpecialists Conference, Tampa, USA, 2013.

Nath, K.A., Prasad, K., Chandra, K.P. and Kulkarni,A.R.“Impedance and a.c. Conductivity Studies of Ba(Pr1/2Nb 1/2)O3 Ceramic”, Bulletin of Materials Science.36, pp. 591-599, August 2013.

Nathawat, R., Gullaiya, N., Patel, M., Nikhilendu,N., Pandey, S. and Rao Ramgopal, V.“An Integrated MEMS Preconcentrator and CantileverFabrication for Enhanced Selectivity and sensitivityof Vapor Phase Explosive Sensing”, 0th InternationalWorkshop on Nano Sensing (NMC 2013), May 1-3,2013, Stanford, California, USA.

Nayak, K., Bajaj, M., Konar, A., Oldiges, P. J., Iwai,H. Murali, K. V. R. M., Rao Ramgopal V.“Negative differential conductivity in Gate-All-Around Si Nanowire FETs and its impact on CircuitPerformance”, Proceedings of the 45th InternationalConference on Solid State Devices and Materials(SSDM2013), Fukuoka, Japan, September 24-27,2013

Nehe, P. and Kumar Sudarshan“Numerical study of methanol reformation from asingle channel with cavities integrated with a micro-combustor,” 10th International conference on flowdynamics, Tohoku University, Sendai Japan,November 25-27, 2013.

“Flow and heat transfer effects in a single channel withcavities for application in wall coated reformers,”40th

National conference on fluid Mechanics and FluidPower, National Institute of Technology Hamirpur,India, during December 12-14, 2013.

Nilesh, B., Rout Dillip, Goel Nidhi, Vedagiri, P.and Mathew Tom V.“Multimodal Public Transit Trip Planner with Real-Time Transit Data,” 2nd Conference ofTransportation Research Group of India (2ndCTRG), Agra, India. Procedia - Social and BehavioralSciences, Elsevier B.V., Vol. 104, 2013, pp. 775–784.

Nori, R., Chandra Raju, N.R., Thomas, N., Panwar,N., Kumbhare, P., Rao, G., Srinivasan, S.,Venkataramani, N. and Ganguly, U.“Conducting Oxide Electrode to Mitigate Instability(Bubble Formation) during Operation of La1-xSrxMnO3 (LSMO) Based RRAM”. MaterialsResearch Society Symposium Proceedings,1507,2013.

Nuli Sadguna and Mathew Tom V.“Online coordination of signals for heterogeneoustraffic using stop line detection,” 2nd Conference ofTransportation Research Group of India (2nd CTRG),Procedia – Social and Behavioral sciences, Vol.104,December 2, 2013, pp.765–774.

“Real time synchronization of signals forheterogeneous traffic,” 13th World Conference onTransport Research (WCTR), Rio de Janeiro, July 15-18, 2013, Brazil.

Nuli Sadguna, Mathew Tom V. and Shah Tanmay“Adaptive signal coordination for heterogeneoustraffic using downstream detection,” 93rd Annualmeeting of Transportation Research Group (TRB),January 12-16, 2014, Washington, DC.

Nunna H.S.V.S.K, Doolla S.and Shukla A.“Multi-agent application for demand response inmicrogrids”, in Industrial Electronics Society, IECON

86

2013-39th Annual Conference of the IEEE, pp. 7629-7634, November 11, 2013.

Nunna H.S.V.S.K., Doolla S. and Shukla A.“Multi-Agent Application for Demand Response inMicrogrids”, Presented at IEEE Industrial ElectronicsConference, held in Vienna, November 10-13, 2013 .

Ordia, L., Venugopal, A., Agrawal, A. and Prabhu,S.V.“Influence of After Body Shape on the Performanceof Blunt Shaped Bodies As Vortex Shedders,”International Conference on Fluid Mechanics andApplication, Paris, 2013, France.

Osianoh Glenn Aliu, Mehta Mahima, MuhammadAli Imran, Karandikar Abhay and Barry G. Evans“A Cellular Automata Approach towards Self-Organization in Wireless Cellular Networks”,Proceedings of European Wireless Conference (EW2013), 2013.

Padekar, B.S. and Raja, V.S.“Stress Corrosion Cracking Studies of a Wrought Mg-Mn Alloy in Chloride Solutions Using Constant LoadTechnique”. Proc. of Int. Conf. CORCON 2013 byNACE, Paper No. 13MCC11, 2013.

Padhi, B., Rajiv Kumar and Raja, V.S.“Study of Environmentally Assisted Cracking Behaviorof S80 Steel in Marine Gas Turbine Environment”,International Corrosion Prevention Symposium forResearch Scholars (CORSYM-2014), Mumbai, India,February, 2014.

Paidi, S., Amrutha, B., Akram, M. and KumarSudarshan“Laminar burning velocity of H2-N2/CO2-air mixturesat elevated temperatures”, 9th Asia PacificCombustion Conference, Gyeongju Hilton, Gyeongju,South Korea, May 19-22, 2013.

“Laminar burning velocity of H2-N2/CO2-air mixturesat elevated temperatures,” 24th InternationalColloquium on Dynamics of Reactive and ExplosiveSystems, Taipei, Taiwan, July 28 – August 3, 2013.

Pal, J. and Banerjee, S.“Health Monitoring of Joints in Planar FrameStructures Using a Vibration Based Model”,Proceedings of the 6th International Conference onStructural Health Monitoring of IntelligentInfrastructure, Hong Kong, China, December 9-11,2013, paper ID. 1113.

“Vibration Based Health monitoring of Joints in aContinuous Beam Structure”, Proceedings of the2013 International Conference on Smart Structuresand Systems (ICOSSS13), International ConventionCenter, Jeju, Korea, September 8-12, 2013, paper ID153.M4F.1.1.SS318-682F.

Palaparthy, V., SushaLekshmi, S.U., John, J., Sarik,S., Baghini, M.S. and Singh, D.N.“Soil Moisture Measurement System for DPHPSensors and In Situ Applications”, 4th InternationalSymposium on Electronic System Design (ISED2013), December 12-13, 2013, Singapore.

Panchal, A. and Bodi, K.“Numerical Simulation of Magnetohydrodynamicflows”, CP17, Proceedings of the 15th Annual CFDSymposium, Bangalore, India, held during August 9-10, 2013.

Panda Lopamudra and Jadhav, G.N.“Petrography and ore petrography of the banded ironformations of Gandhamardan region, Keonjhar,Orissa, India,” proceedings of International Seminaron Mineral Processing Technology-2013 (MPT-2013), conducted at CSIR-IMMT, Bhubaneswar fromDecember 10-12, 2013. Abstract Volume, p.12, PaperNo.0196.

Panda, R.K. and Nagarajan, R.“Evaluation of Rainfall trend in Ghataprabha riverbasin”, International Scientific Conference onEngineering and applied Sciences, Higher EducationForum, Taiwan.

“Sustainable water based growth potential of villages– a geospatial approach”, proceedings ofInternational Conference on integrated water,wastewater and isotope hydrology, Department ofCivil Engineering, Bangalore University, 2013, Vol.I,pp.79-87.

Panda, S. K., Gedam, S.S. and Rajaram, G.“Ionospheric characteristics of low latitude anomalyzone over Indian region by ground based GPS, RadioOccultation and SPIM model predictions”, IEEEInternational Geoscience and Remote SensingSymposium (IGARSS 2013), during July 21-26, 2013,pp.1839-1842.

“GPS Derived Ionospheric TEC Response to AnnularSolar Eclipse over Indian Region on 15 January 2010,”IEEE International Conference on Space Science andCommunication (IconSpace), July 1-3, 2013, pp.213-218. doi: 0.1109/IconSpace.2013.6599467,URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=& arnumber = 6599467&isnumber=6599417

Pandey Pratima and Venkataraman, G.“Comparison of DEMs Derived From TanDEM-X andSRTM-C for Himalayan Terrain”, IEEE IGARSS’2013, Melbourne, Australia, July 21-26, 2013, pp.322-325.

Pandey V., Paul S., Mishra A.M. and Singh S.“Detailed parametric bifurcation analysis of advancedheavy water reactor” in International Congress onAdvances in Nuclear Power Plants, April 2013.

87

Pandey, S.K., Hiremath, A.M., Salve, A.B. andAsolekar, S.R.“What Difference Can Hong-Kong Convention Maketo Ship Recycling in India?” Proceedings of theInternational Conference on Ship RecyclingSHIPREC2013 – Malmö, Sweden, April 7-9, 2013.

Pandey, V., Gururajan, M.P. and Dusane, R.O.“Low Temperature Aluminum Induced Crystallizationof HWCVD Deposited a-Si:H”, Proceedings ofInternational Conference on AdvancedNanomaterials and Emerging EngineeringTechnologies, ICANMEET, Chennai, July 2013.

Pani B.S.“Mixing in co-flowing turbulent jets,” 21st.Hydrotechnical Conference, Banff, Canada, May14-17, 2013.

Panigrahi, S. K., Shojaei Baghini, M., Gogineni,U. and Iravani, F.“120 V Super Junction LDMOS Transistor”,Proceedings of IEEE EDSSC 2013, Hong Kong.

Pant, C., Bhattacharya, A. and Agrawal, A.“Groth of cloud droplets in the presence ofturbulence,” ISHMT-ASME, 2013, IIT Kharagpur.

Pant, C.S., Bhattacharya, A. and Agrawal, A.“Condensation growth and spectra of droplets incumulus clouds,” ISHMT-ASME Heat and MassTransfer Conference, 2013, IIT Kharagpur.

Panwar, N., Rao, G., Chandra Raju, N.R., Nori, R.,Kumbhare, P., Deshmukh, S., Senthil Srinivasan,V.S., Venkataramani, N. and Ganguly, U.“Thermal Budget Reduction for Back-endCompatibility and Control of Resistance SwitchingMechanism (Unipolar to Bipolar) in Pr1-xCa xMnO3(PCMO) RRAM”. Materials Research SocietySymposium Proceedings,1507, 2013.

Patani Jeet, Gabale Vijay and Raman Bhaskaran“Minimum weight multicast scheduling in multi-channel wireless mesh networks for real-time voiceapplications”, COMSNETS 2013, pp. 1-9, 2013.

Patel Kinjal and Vachhani Leena“A Novel Visual Odometry Correction Using SensorFusion Technique on Multiple Cameras”, inProceedings of IEEE Multi Conference on Systemsand Control (MSC), Hyderabad, India, August 2013.

Patel Pragati, Mukherjee Biswajeet andMukherjee Jayanta“Wideband Rectangular Dielectric Resonator Antennawith Novel Array of Square Shaped Slots”, 2013 Asia-Pacific Microwave Conference, Seoul, Korea.

Pathan, S.S. and Manik, D.N.“Modification of flat plates to reduce radiationefficiency,” Acoustics 2013, Technologies for aQuieter India, CSIR National Physical Laboratory,2013, New Delhi.

Patil Deepak, Mulla Ameer, Chakraborty Debrajand Pillai Harish“Grobner basis computation of feedback control fortime optimal state transfer”, 52nd IEEE Conferenceon Decision and Control (CDC), Florence, Italy,2013.

Patil Machhindranath, Bandyopadhyay B. andPaul A. K.“Discrete-time sliding mode tracking control forNMP systems using reduced order switchingfunction”, 10th IFAC International Symposium onDynamics and Control of Process Systems, Mumbai,India, 2013, pp. 469-474.

Patil, N., Shaikh, S., Bhonsale, A.V., Sharma, A. andBhardwaj, R.“Evaporation of a microdroplet on a hydrophobicsurface,” Proceedings of the 22nd National and 11thInternational ISHMT-ASME Heat and Mass TransferConference, 2013, IIT Kharagpur.

Paul S., Mishra A.M., Pandey V. and Singh S.“A density fit model for stability analysis of heatedchannel” in International Congress on Advances inNuclear Power Plants, April 2013.

Pawar, N. ,Belur, M.N. , Bhushan, M ., Tiwari,A.P., Kelkar, M.G., Pramanik, M. and Singh, V.“A data-driven adaptive model-identification basedlarge-scale sensor management system: Applicationto Self Powered Neutron Detectors,” Proceedingsof the IEEE Conference on Evolving and AdaptiveIntelligent Systems, Linz, Austria, 2014.

Perala S., Shaikh T., Zope M., Gautam R., Gupta A.and Chowdhury A.“Catalytic Combustion of Hydrogen Peroxide andMethanol Mixtures,” Proceedings of the 9th Asia-Pacific Conference on Combustion, Gyeongju, 2013,Korea.

Phule Raskar R. and Choudhury, D.“A critical review of liquefaction susceptibilitycriteria for fine grained soils subjected to earthquakeloading”, Proceedings of Indian GeotechnicalConference, IGC-2013, Geotechnical Advances &Novel Geotechnical Applications (GANGA), IITRoorkee, ISBN: 978-81-925548-1-5, Paper ID: 5Th-01, December 22 – 24, 2013, pp. 1-10, in CD.

Phuleria H.C. and Gehrig R.“The role of air quality monitoring networks insupporting health research and legislation”, BMCProceedings, 7(Suppl 5):O11, 2013.

88

Pillai Harish, K., Ortega Romeo, HernandezMichael, Devos Thomas and Francois Malrait“Robustness Analysis of a Position Observer forSurface-Mount Permanent Magnet SynchronousMotors vis-a-vis Rotor Saliency,” 9th IFACSymposium on Nonlinear Control Systems,Toulouse, France, September 2013.

“Robustness Analysis of positions observers forpermanent magnet synchronous motors vis-a-vis rotorsaliency,” Electric Drives Production Conference(EDPC) 2013.

Pillai Manek, N. and Balaji, R.“Assessment of Shoreline Oscillations along SouthGujarat Coastline, India,” Proceedings of 5th IndianNational Conference on Harbour and OceanEngineering (INCHOE2014), NIO, Goa, 2014, pp.287-291.

Ponnurangam, G.G. and Rao, Y.S.“Retrieval of soil moisture using extendedpolarimetric surface scattering models”, Proc.PolInSAR 2013, Frascati, Italy, during January 28 –February 1, 2013, (ESA SP-713, August 2013)

Potdaar, T.S., Sinha, A. and Pant, R.“Controller Design for an Outdoor AutonomousAirship”, AIAA Lighter-Than-Air System TechnologyConference, Georgia, USA, doi: 10.2514/6.2013-1301, June 2013.

Prakash, A., Durbha, S. S., King, R. L. and Younan,N. H.“Domain Adaptation Approach for Classification ofHigh Resolution Post- Disaster Data”, Proceedingsof the IEEE International Geoscience and RemoteSensing Symposium, Melbourne, Australia, 2013

Prakash, A., Sahu, N.K. and Bahadur, D.“Enchanced Photocatalytic Performance of Zno-Reduced Graphen Oxide Hybrid Synthesized viaUltrasonic Assisted Study”, AIP ConferenceProceedings. 1512, 2013, pp. 312-313.

Prasad, N.K., Naulakha, A., Jha, N., Meena Singh,Bahadur, D., Prakash, D. and Mandal, R.K.“Magnetic and Electrical Properties of Nanoparticlesof Ni-Substituted Ferrites Synthesized Using aMicrowave Refluxing Process”, InternationalJournal of Material Research. 104 (7), 2013, pp.68-685.

Prasanna, A.N. and Mehra, S.“Comprehensive phylogenetic analysis ofmycobacteria”, IFAC Proceedings Volumes (IFAC-PapersOnline), 12 (PART 1), 2013, pp. 101-106.

Pujari, N.N., Mandal, T.K., Ghosh, S. and Lala, S.“Optimisation of IDA-based fragility curves,” 11th

International Conference on Structural Safety andReliability (ICOSSAR13), New York, June 16-20,2013, USA.

Puppala, A.J., Choudhury, D. and Basu, D.“General report TCs 307+212 ThermalGeomechanics with Emphasis on GeothermalEnergy”, Proceedings of the 18th InternationalConference on Soil Mechanics and GeotechnicalEngineering, Challenges and Innovations inGeotechnics, 18ICSMGE Paris 2013, Edited byPierre Delage, Jacques Desrues, Roger Frank, AlainPuech, Francois Schlosser, Paris, Vol. 1, 2013, pp.3335-3342, France.

Puppala, G., Moitra, A., Sathyanarayanan, S., Kaul,R., Sasikala, G., Prasad, R.C. and Kukreja, L.M.“Evaluation of Fracture Toughness and ImpactToughness of Laser Rapid Manufactured Inconel-625Structures and their Co-relation”, 13th InternationalConference on Fracture 2013, ICF,1, 2013, pp.51-60.

Purohit, J.L., Patwardhan, S.C. and Mahajani,S.M.“Predictive control of a reactive distillation columnusing multi-rate DAE EKF”, IFAC ProceedingsVolumes (IFAC-PapersOnline), 10 (PART 1), 2013,pp. 75-80.

Pustode, M.D., Dewangan, B., Raja, V.S. andPaulose, N.“Hot Salt Stress Corrosion Cracks Initiation Studiesusing DC Potential Drop Method”. InternationalCorrosion Prevention Symposium for ResearchScholars (CORSYM-2014). Mumbai, India, February2014.

Pustode, M.D., Raja, V.S. and Paulose, N.“Hot Salt Stress Corrosion Cracking Study of Ti-6Al-4V Alloy at 400°C”, Proc. of Int. Conf. CORCON2013, Paper No. 13MCC13 by NACE., 2013.

Pustode, M.D., Raja, V.S. and Tamilselvi, M.“The Stress Corrosion Cracking Susceptibility of Ti-6Al-4V Alloy in Presence of Hot Salt”, ConferenceProceeding, Corrosion 2013, Orlando, USA, C2013-2157, 2013.

Quadros, R., Sashittal, P., Ramachandran, A. andSinha, K.“Evolution of turbulent heat flux across a shock wave,”at the 5th European Conference for Aeronautics andSpace Sciences, Munich, Germany, 2013.

Rachamalla Shashank, Mishra Debadatta andKulkarni PurushottamThe Twentieth Annual International Conference onHigh Performance Computing (HiPC 2013).

89

Raghunathan Ravi“Recent Progress on the Exterior Square L-function,”Proceedings of the Legacy of Ramanujan, RMSLecture Notes Series No. 20, 2013, pp. 301 – 322.

Rajendra, K and Balaji, R.Wave damping characteristics of twin perforatedbarriers, Proceedings of 5th Indian NationalConference on Harbour and Ocean Engineering(INCHOE2014), NIO, Goa, 2014, pp. 567-567.

Rajendran, B. and Henning, A.K.“B. Cronquist and Z. Or-Bach. Pulsed Laser Annealing:A scalable and practical technology for monolithic3D ICs,” The IEEE International Conference on 3DSystem Integration, 2013.

Rajendran, B., Y. Liu, J. Seo, Gopalakrishnan, K.,L. Chang, D. Friedman and Ritter, M.“RRAM Devices for Large Neuromorphic Systems,”Non-Volatile Memories Workshop, 2013.

Ram Rathan Lal, B. and Mandal, J. N.“Effect of Reinforcement Coverage Ratio on CellularReinforced Fly Ash Walls.” Sustainability andPerformance of Slopes and Embankments III,Geocongress 2013, San Diego, California, March 3-6, 2013, pp. 1-10, USA.

“Numerical Modeling of Cellular Reinforced Fly AshWalls - Effect of Reinforcement Coverage Ratio,”Sustainability and Performance of Slopes andEmbankments III, Geocongress 2013, San Diego,California, March 3-6, 2013, pp. 1-10, USA.

Ram Rathan Lal, B., Padade, A. H., Dutta, S. andMandal J. N.“Numerical Modeling of Cellular Reinforced FlyAsh Walls Subjected to Strip Loading.” Geo-Characterization and Modeling for Sustainability,Geocongress 2014, ASCE, Atlanta, GA, February23-26, 2014, pp. 3062-3071. (GSP 234), USA.

Ramachandran, P. and Puri K.“PySPH: A framework for parallel particlesimulations”, in proceedings of the 3rd InternationalConference on Particle-Based Methods (Particles2013), Stuttgart, Germany, during September 18-20,2013.

Ramesh Kumar P. and Bandyopadhyay B.“Variable gain super twisting controller for theposition stabilization of Stewart platform”, 3rdInternational Conference on Advances in Controland Optimization of Dynamical Systems (ACODS),Kanpur, India, March 2014, pp., 115-121.

“Stabilization of Stewart platform using smoothsecond order sliding mode control”, 22nd IEEEInternational Symposium on Industrial Electronics(ISIE-2013), Taipei, Taiwan, pp. 1-6, May 2013.

“The forward kinematic modeling of a Stewartplatform using NLARX model with waveletnetwork,”11th IEEE International Conference onIndustrial Informatics (INDIN), 2013, Bochum,Germany, pp. 343-348, July 2013.

Ramteke Ankit, Malu Akshat, BhattacharyyaPushpak, Nath Saketha J.“Detecting Turnarounds in Sentiment Analysis:Thwarting”, ACL, Vol.(2), pp. 860-865, 2013.

Rana, V., Raja, V.S., Abraham, G. and Kain, V.“Effect of Surface Treatments on the CorrosionBehavior of Nickel Alloy 800”, InternationalCorrosion Prevention Symposium for ResearchScholars (CORSYM-2014), Mumbai, India, February2014.

Ranade Abhiram and Sarade Shripad“DrawCAD: Mouse-sketch-based engineeringdrawing”, APCHI ‘13 Proceedings of the 11th AsiaPacific Conference on Computer Human Interaction,APCHI,pp. 344-353, 2013.

Rane, K.K. and Date, P.P.“Rheological investigation of MIM feedstocks forreducing frictional effects during InjectionMoulding,” International Conference on Tribologyin Manufacturing Processes 2014, 2013, Darmstadt.

Rane, M. V., Joshi, S.M. and Bhave, D.P.“Solar Collector for Agro Produce Drying,”Knowledge Forum at VIII Annual Conference onEmerging Technologies and Development, 2013, IITBombay.

Ranjan, S., Kumar, D., Prasad, P., Hiremath, A.M. andAsolekar, S.R. C“Influence of Aeration in Facultative Aerated Lagoonson Overall Microbial Activity using FDA HydrolysisAssay as an Indicator” in the proceedings of ICEB,held during December 10-13, 2014, Stockholm,Sweden.

Ranwadkar, R., Patkar, S. and Gopalakrishnan, S.“High Performance Computing For DiscontinuousGalerkin Method Based CFD Solver,” IEEEConference on High Performance Computing,Bangalore, 2013, Karnataka.

Rao Krishna K.V., Bhargav Venil P. and ChetanKumar H.“A New Calibration Technique for Value of Travel Timein Urban Networks”, Proceedings of the of the 13th

World Conference on Transport Research, Reo deJaneiro, July 15-18, 2013, Brazil.

Rao, A.B.“Role of Socio-Economic Factors in Success ofCommunity Biogas Plants in Rural India”, 41st Dairy

90

Industry Conference in Global Dairy Industry &Food Security”, Mumbai, March 14-16, 2013.

“Assessment of Carbon Mitigation Potential ofBiogas Technology in India”, 4th National ResearchConference on Climate Change, IIT Madras, October26-27, 2013.

“Carbon footprint of dairy sector – A case study”,International Conference on Agriculture andClimate Change, organize by TERI, New Delhi,January 29-30, 2013.

“Understanding the Impact of Lifestyle on CarbonFootprint: Comparative study of Urban and RuralHouseholds”, International Conference on Trade,Markets and Sustainability (ICTMS 2013),organized by Symbiosis Institute of InternationalBusiness, Pune, February 22-23, 2013.

“Cost Implications of Carbon Capture and Storage forthe Coal Power Plants in India”, InternationalConference on Advances in Energy Research(ICAER), December 10-12, 2013.

“Consumer purchase decisions for energy intensiveappliances in India”, International Conference onAdvances in Energy Research (ICAER), December10-12, 2013.

“Specific Energy Consumption in Clamp Type BrickKilns of Karad, District Satara, Maharashtra, India”,International Conference on Advances in EnergyResearch (ICAER), December 10-12, 2013.

“Environmental Life Cycle Assessment of TraditionalBricks in Western Maharashtra, India”, InternationalConference on Advances in Energy Research (ICAER),December 10-12, 2013.

“Multi-criteria analysis of alternative biogastechnologies”, International Conference onAdvances in Energy Research (ICAER), December10-12, 2013.

“Comparative Assessment of BiodegradableDisposable Plates from User and EnvironmentPerspective”, International Conference onEnvironment, Technology and SustainableDevelopment: Promises and Challenges in the 21stCentury, Gwalior, March 2-4, 2014.

Rao, B.“Integrated LCA for evaluating sustainabledevelopment of dairy sector: A case study of milkproduction in Western Maharashtra, India”, IndianLife Cycle Assessment and Management Conference(ILCM 2013) organized by Federation of IndianChamber of Commerce and Industries (FICCI),Bengaluru, September 25-27, 2013.

“Use of Open Source Tools for Water ResourcesPlanning and its use in Vulnerability Assessment”,International Conference on Agriculture andClimate Change, New Delhi, January 29-30, 2013.

“Towards environmental assessments for change inland use of Industrial to Residential and CommercialLand Use Conversions in Core City”, 15th

International Conference on Humane Habitat,Mumbai, February 2-4, 2013.

“Multi-criteria analysis of alternative biogastechnologies for India’s sustainable development”,International Conference on Advances in EnergyResearch (ICAER), Mumbai, December 10-12, 2013.

“Social and Environmental Life Cycle Assessment ofBrick making in Western Maharashtra, India”,International Conference on Advances in EnergyResearch (ICAER), Mumbai, December 10-12, 2013.

“Photovoltaics for irrigation in Shahapur taluka ofThane district”, International Conference onAdvances in Energy Research (ICAER), Mumbai.December 10 – 12, 2013

“Quality Issues in Dairy Sector: A Policy andInstitutional Analysis”, 7th International FoodConvention (IFCON), CFTRI, Mysore, December 18-21, 2013.

Ratnakar, R.V.V., Ajay, A. and Raja, V.S.“Evolution of Hot Corrosion Resistance of Duplexand Functionally Graded Thermal Barrier Coatings”,International Corrosion Prevention Symposium forResearch Scholars (CORSYM-2014), Mumbai, India,February 2014.

Raut, B.R and Jangid, R.S.“Seismic response control of benchmark building usingviscoelastic dampers”, The 2013 World Congress onAdvances in Structural Engineering and Mechanics,Jeju, September 8-12, 2013, pp. 1176-1203.

Ravi Sathe, Madhav T. Vittal and Raja, V.S.“Evaluation of Performance of CommerciallyAvailable Boiler Water Treatment Chemicals forPrevention of Scaling and Corrosion on Waterside ofMarine Boiler Tubes”, International CorrosionPrevention Symposium for Research Scholars(CORSYM-2014), Mumbai, India, February 2014.

Ravi, B.“Casting Design and Simulation Software: 25-YearPerspective and Future,” 61st Indian FoundryCongress, Kolkata, 2013, Kolkata.

Ravi, S., Sufija, M.V., Patel, S.C., Sheikh, J.M.,Sridhar, M., Kaminsky, F.V., Khachatryan, G.K.,Nayak, S.S., Bhaskara Rao, K.S.“Diamond potential of the Eastern Dharwar Craton,

91

southern India, and a reconnaissance study of physicaland infrared characteristics of the diamonds,” inProceedings of 10th International KimberliteConference, Special Issue of the Journal of theGeological Society of India, ed. D.G. Pearson &others, Vol.1, 2013, pp. 335-348.

Ravikumar, G, Khaparde, S.A. and Pradeep, Y.“CIM oriented database for topology processing andintegration of power system applications”, IEEEPower and Energy Society General Meeting (PES),July 2013, pages 1-5.

Ravikumar, G., Khaparde, S.A. and Joshi, R.K.“Towards CIM based control centers,” IEEE IndiaConference (INDICON), December 2013, pp. 1-6.

Rawal, Y., Burman, D., Manik,P. P., Bhatt, P.,Anoop C., Lodha, S., Ganguly, S., Shojaei Baghini,M.“Performance Comparison of MIM and MIS Diodesfor Energy Harvesting Applications”, accepted in IEEEEDSSC, 2014, China.

Ray M.P., Puranik B.P. and Bhandarkar U.V.“Effect of flux evaluation schemes in numericalsimulation of shockwave-gas cylinder interaction,”Proceedings of the 29th International Symposium onShock Waves, Madison, WI, 2013, USA.

Ray Prasenjit and Rao Ramgopal, V.“Finite Element Analysis of ZnO Nanowire EmbeddedMicro-cantilever for Energy Scavenging Applications”,10th International Workshop on Nano Sensing (NMC2013), May 1-3, 2013, Stanford, California, USA.

“A ZnO Thin Film Transistor Embedded PolymerCantilever (CantiFET) Sensor for Surface StressSensing Applications”, 0th International Workshopon Nano Sensing (NMC 2013), May 1-3, 2013,Stanford, California, USA.

Reddy Shrikanth, Kamma Anil and MukherjeeJayanta“Compact Printed Monopole UWB Antenna loadedwith Non – Concentric Open - Ended Rings for TripleBand - Notch Characteristic”, 2013 Asia-PacificMicrowave Conference, Seoul, Korea.

Reddy Shrikanth, Kharche Shilpa and MukherjeeJayanta“Ultra Wideband Printed Monopole Antenna withCurve shaped Extended Asymmetric CPW GroundPlane for Stable Unidirectional Radiation Pattern”,Accepted in 2014 IEEE International Symposium onAntennas and Propagation and USNC-URSI RadioScience Meeting, Memphis, USA.

Reddy Sivasena and Reddy Janga, M.“NDVI Based Assessment of Land Use Land CoverDynamics in a Rainfed Watershed Using Remote

Sensing and GIS,” Proceedings of InternationalConference on Interdisciplinary Applications ofRemote Sensing and Geographic InformationSystems (ICIARSGIS-2013), Mumbai, April 26-27,2013, pp.182-193.

Reddy, V.M., Katoch, A., Roberts,W.L. and KumarSudarshan“Scaling for high intensity swirl based ultra lowemission flameless combustor with liquid fuels,”Proceedings of the Combustion Institute, 2014.

Roy, R.N., Kumar, S. and Sreedhara, S.“Modeling of turbulent lifted CH4/air flame issuingin hot surrounding using conditional moment closuremodel coupled with an extinction model,” 9th Asia-Pacific Conference on Combustion, Gyeongju, 2013,Korea.

Sabnis Anupa and Vachhani Leena“A Multiple Camera based Visual Compass for a MobileRobot in Dynamic Environment”, in Proceedings ofIEEE Multi Conference on Systems and Control(MSC), Hyderabad, India, August 2013.

Saha, S., Nagar, S., Gupta, S.K. and Chakrabarti, S.“Effect of lithium-ion implantation of varying fluenceon the optical properties of ZnMgO,” Accepted forSPIE in San Francisco, United States.

Sahai A., Prabhu S. V. and Chowdhury A.“Oxy-Coal Combustion in a Fixed Bed Reactor,”Proceedings of the 9th Asia-Pacific Conference onCombustion, Gyeongju, 2013, Korea.

Sahoo L.K., Bandyopadhyay S. and Banerjee R.“Benchmarking Energy Efficiency of Opencast Miningin India”, in Proceedings of the 4th InternationalConference on Advances in Energy Research (ICAER2013), Mumbai, India, December 10-12, 2013.

Sahu, N., Gupta, T., Patel, S.C., Khuntia, D.B.K.,Behera, D., Pande, K., Das, S.K.“Petrology of lamproites from the Nuapada LamproiteField, Bastar Craton, India,” in proceedings of 10thInternational Kimberlite Conference, Special Issueof the Journal of the Geological Society of India,Vol.1, ed. D.G. Pearson & others, 2013, pp.137-165.

Saideep, Kishor. Sudi, Pande, S.S.“Efficient Sampling Stratergies for Inspection ofFreeform Surfaces on Coordinate MeasuringMachines,” Proc. of the 2nd InternationalConference on Intelligent Robotics, Automation andManufacturing (IRAM 2013),IIT Indore, December16-18, 2013, Madhya Pradesh, India.

Saini R.K. and Bose M.“CFD Analysis of flow of two immiscible fluids in adisk and doughnut pulsed column”, in Proceedings

92

of AIChE 2013 Annual Meeting, San Francisco, USA,November 3-8, 2013.

Saini S.K., Mohanan S., Ambekar A., ChaudhariM., Chowdhury A. and Srivastava A.“Optical Diagnostic of Temperature Distribution in aMonopropellant Flame using Mach ZehnderInterferometer,” Proceedings of the 9th Asia-PacificConference on Combustion, Gyeongju, 2013, Korea.

“Optical Diagnostic of Temperature Distribution in aMonopropellant Flame using Mach ZehnderInterferometer,” Proceedings of the 22th Nationaland 11th International ISHMT-ASME Heat and MassTransfer Conference, 2013, IIT Kharagpur.

“Optical Diagnostic of Temperature Distribution in aMonopropellant Flame: Effect of Cavity AspectRatio,” ISHMT-ASME Heat and Mass TransferConference, 2013, IIT Kharagpur.

Saini, S.K., Mohanan, S., Ambekar, Chaudhari, M.,A., Chowdhury, A. and Srivastava, A.“Optical Diagnostic of Temperature Distribution in aMonopropellant Flame using Mach ZehnderInterferometer,” 9th Asia-Pacific Conference onCombustion, Gyeongju, 2013, Korea.

Salame, P.H., Drai, R., Prakash, O. and Kulkarni,A.R.“Synthesis of Nanocrystalline Giant DielectricConstant Gd 2cuo4 Ceramic By Pechini ProcessAdvanced Nanomaterials and EmergingEngineering Technologies”, InternationalConference, pp. 123-125, 2013.

Salil Joshi, Diptesh Kanojia and PushpakBhattacharyya“More than meets the eye: Study of Human Cognitionin Sense Annotation”, NAACL HLT 2013, Atalanta,USA, June 9-14, 2013.

Salunke, S.K. and Date P.P.“Analysis of Strain Nonuniformity Index (SNI) inelectrohydraulically formed sheet metal component,”International Conference on High Speed Forming(ICHSF 2014), Daejon, May 2014, Korea.

Samal Dipak, R. and Gedam Shirish, S.“Monitoring land use changes associated withurbanization in the Upper Bhima basin, Maharashtra,India”, IEEE-IGARSS-2013, held at Melbourne,Australia, in 2013, pp. 2673-2676.

Sanand Dilip and Pillai Harish“A novel characterization of solutions of ARE,” 3rdInternational Conference on Advances in Controland Optimization of Dynamical Systems (ACODS),Kanpur, India, February 2014.

Sant, S., Lodha, S., Ganguly,U. and Ganguly, S.“Novel nonlinear interpolation for Si1?xGexbandstructure parameters” in IEEE InternationalConference of Electron Devices and Solid-StateCircuits, Bangkok, December 2013.

Saran S., Prashanth K.R., Srivastava, A., Singh, S.,Kumar, A. and Gupta, A.K.“Limited View Tomographic Image Reconstructionusing Genetic Algorithm,” International Conferenceon Advanced Engineering Optimization ThroughIntelligent Techniques, SVNIT, Surat, 2013, Gujrat.

Sarvesha, R., Sunil Kumar and Raja, V.S.“Study of Loading Condition on SCC Susceptibilityof Austenitic Stainless Steel”, InternationalCorrosion Prevention Symposium for ResearchScholars (CORSYM-2014), Mumbai, India, February2014.

Satpal, S.B., Khandare, Y., Banerjee, S. and Guha,A.“Application of Support Vector Machine in HealthMonitoring of Plate Structures,”The 2013 WorldCongress on Advances in Structural Engineeringand Mechanics (ASEM13), Jeju, 2013, South Korea.

Satpute, S. and Raje, D.“Adaptive cropping policy for Mahanadi basin underclimate change scenarios,” The Fourth NationalResearch Conference on Climate Change, organizedby Centre for Science and Environment (CSE), IITMedras, Chennai, October 2013.

Satyavathi G, Deo, M.C. and Vethamony, P.“Re-evaluation of design waves at the westernoffshore considering climate change”, Proceedingsof the National Conference of Ocean Society ofIndia, OSICON ‘13, Indian Institute of TropicalMeteorology, Pune, November 26-28, 2013, pp.178-180.

Savant, C., Raja, V.S., and Jindal, R.“Surface Characterization and Corrosion BehaviourStudy of Phosphated Hot-Dip Galvanized,Galvannealed and Zn-Al-Mg Coated Steels forAutomobile Application”. International CorrosionPrevention Symposium for Research Scholars(CORSYM-2014). Mumbai, India, February 2014.

Sawant Uma and Chakrabarti Soumen“Learning joint query interpretation and responseranking”, WWW 2013, pp. 1099-1110, 2013.

Sawant, V.S., Chaporkar, P. and Belur, M.N.“MIXD-TCP: Completely decoupled end to endcongestion control algorithm,” National Conferenceon Communications (NCC), 2013 Delhi, India 2013,pages 1-5.

93

Sekhar, K.C., Kashyap, B.P. and Sangal, S.“AFM Characterization of Structural Evolution andRoughness Of AISI 304 Austenitic Stainless Steelunder Severe Deformation by Wavy Rolling”,Advanced Materials Research. 794, 2013, pp. 230-237.

Sen, J. and Chakrabarti, S.“Tunability of Optical Emission Wavelength inIn0.21Al0.21Ga0.58As-Capped InAs/GaAs QuantumDot Heterostructures Using Multilayer Stacking,”MRS Fall Meeting, Boston, USA.

Sengupta, T., Jain, S. and Bhushan, M.“A compressed sensing based basis-pursuitformulation of the room algorithm”, IFAC ProceedingsVolumes (IFAC-PapersOnline), 12 (PART 1), 2013, pp.238-243.

Senthil Nathan, Kulkarni Purushottam, BellurUmesh“Resource availability based performancebenchmarking of virtual machine migrations”,ICPE 2013, pp.387-398, 2013.

Sevani Vishal and Raman Bhaskaran“Understanding HTTP traffic performance in TDMAmesh networks”, COMSNETS 2013, pp. 1-10, 2013.

Shabiimam, M.A. and Dikshit, A.K.Issues in Sustainable Leachate Control andManagement,” International Conference on Scienceand Technology (ICST2K14) organized by S.B. PatilCollege of Engineering, Indapur, February 21-23,2014.

Shaik M.A.R. and Vedagiri, P.“A Novel Methodology for Enhancing the Capacityof Toll Plaza Under Mixed Traffic Condition,” 18thHong Kong Society for Transportation StudiesInternational Conference (HKSTS’2013), HongKong, December 14-16, 2013, pp.655-662.

Shaligram, Omkar. and Pande, S.S.Design and Development of Parallel KinematicOrientation Device for CNC Machines,” Proceedingsof the 2nd International Conference on IntelligentRobotics, Automation and Manufacturing (IRAM2013), IIT Indore, December 16-18, 2013, MadhyaPradesh, India.

Shankara Narayanan Krishna and Trivedi Ashutosh“Hybrid Automata for Formal Modeling andVerification of Cyber-Physical Systems”, Journal ofthe Indian Institute of Science, 2013.

Shankara Narayanan Krishna, Marian Gheorgheand Ciprian Dragomir“Some Classes of Generalised Communicating PSystems and Simple Kernel P Systems”, CiE 2013,pp. 284-293, 2013.

Sharan Raghubir, Mehendale Mahesh andKarandikar Abhay“New Technologies and Old Cultures: How ICT isshaping and getting shaped by the Indian society”,Proceedings of ETHICOMP, 2013.

Sharma Mayank, Shitole Sanjay, BhattacharyaAvik, Rao Y. S., Buddhiraju K. Mohan and DasAnup.“Corned difference weighted mean SAR speckel filter”,Asia-Pacific Synthetic Aperture Radar (APSAR)Conference held in Tsukuba, Japan, IEEE Xplore,during September 23-27, 2013, pp. 400-403.

Sharma, S., Baelmans, M. and Saha, S.K.“Performance analysis of parallel plate and rectangularmicrochannel counter flow heat exchangers,” 22ndNational and 11th International ISHMT-ASME Heatand Mass Transfer Conference, 2013, Indian Instituteof Technology Kharagpur.

Shastri, H., Ghosh. S. and Karmakar, S.“Impacts of Urbanization on Indian Summer MonsoonRainfall,” AGU Fall Meeting 2013, San Francisco,2013, USA.

Sherly, M.A., Karmakar, S., Chan, T. and Rau, C.“Regional Depth-Duration-Frequency Curves forMumbai City,” proceedings of 6th InternationalConference on Water Resources and EnvironmentalResearch (ICWRER 2013), held during June 3-7 2013,Koblenz, Germany.

Shinde Amar and Dikshit, A.K.“Life Cycle Assessment and Air Quality Management,”International Conference on Science and Technology(ICST2K14) at S.B. Patil College of Engineering,Indapur, February 21-23, 2014.

Shinde, H., Mahajan, P., Singh, R. and Narasimhan,K.“Three Dimensional Finite Element Analysis ofStaggered Backward Flow Forming Process”, ASME2013 International Manufacturing Science andEngineering Conference Collocated with the 41stNorth American Manufacturing ResearchConference MSEC2013, 1, Art. No. MSEC2013-1219, 2013.

Shitole Sanjay, Rao, Y. S., Buddhiraju KrishnaMohan, Bhattacharya Avik and Das Anup“Region Growing Based Improved SAR Speckle Filterfor Polarimetric Data”, Asia-Pacific SyntheticAperture Radar (APSAR) Conference held in Tsukuba,Japan, IEEE Xplore during September 23-27, 2013,pp. 517-520.

Shitole Sanjay, Deo Rinki, Rao, Y. S. and KrishnaMohan, B.“Speckle filters evaluation based on separability and

94

polarimetry index”, Proc. PolInSAR 2013, Frascati,Italy, during January 28 – February 1, 2013, (ESA SP-713, August 2013)

Shitole Sanjay, Rao, Y. S. and Krishna Mohan, B.“Influence of speckle filtering on polarimetric SARdata”, Proc. PolInSAR 2013, Frascati, Italy, duringJanuary 28 – February 1, 2013, (ESA SP-713, August2013)

Shitole Sanjay, Rao, Y.S., Krishna Mohan, B. andDas Anup Kumar“Self-organizing feature map based polarimetric SARdata denoising”, Proc. IGARSS 2013 (IEEE Geosci.& RS society), Melbourne, 2013, pp.2373-2376.

Shrivastava Mukul, Agrawal Amit and SharmaAtul“CFD study on Hydrodynamics of Fish-likeUndulating Foil using a Novel Level-Set BasedImmersed Boundary Method,” Proceedings of 40thNational Conference on Fluid Mechanics and FluidPower, National Institute of Technology Hamirpur,2013.

Shukla Satyavati, Khire M.V. and Gedam S. S.“Effects of Urbanization on river basin ecosystem - AFramework”, IEEE International Geoscience andRemote Sensing Symposium (IGARSS 2013), July 21-26, 2013, Melbourne, Australia, pp.: 3861- 3863.

Shyam Kamal and Bandyopadhyay B.“Robust controller design for discrete fractional ordersystem: A disturbance observer based approach”, 3rdInternational Conference on Advances in Controland Optimization of Dynamical Systems (ACODS),Kanpur, India, March 2014, pp., 558-563.

Shylamoni, P., Choudhury, D., Ghosh, S., Ghosh,A.K. and Basu, P.C.“Seismic ground response analysis of KK-NPP sitein the event of NCO earthquake using DEEPSOIL,”ASCE Geo-Congress, Atlanta, USA, February 23-26,2014.

Sibin Mohan, Bhalerao Karuna and Khaparde,S.A.“A Review of Self healing applications in SmartGrids,” International conference on Power Systems,ICPS October 2013, Kathmandu, Nepal, pages 1-6.

Sikdar, S., Banerjee, S. and Subhani, S. M.“Detection of Disbond in a Honeycomb CompositeSandwich Structure Using Ultrasonic Guided Wavesand Bonded PZT Sensors”, Proceedings of the 14th

Asia Pacific Conference On Non-Destructive Testing(APCNDT), Renaissance Convention Centre Hotel,November 18-22, 2013, paper ID 139, 2013, Mumbai.

Singh Manoj Kumar and VenkatachalamParvatham“Efficient Implementation of Bayesian HierarchicalModel to Study Space Time Variability of Latent HeatFlux”, Computational Science and Its Applications–ICCSA 2013, Lecture Notes in computer ScienceLNCS 7974, Springer Berlin Heidelberg, 2013, pp.33-44.

“A Bayesian model to study spatio-temporalvariability of latent heat flux and its trend”, ICESD2014, APCBEE Proceedings, Elsevier 2014.

Singh R. and Banerjee R.“Estimation of Roof-top Photovoltaic Potential UsingSatellite Imagery and GIS.” in Proceedings of the 39th

IEEE Photovoltaic Specialists Conference (PVSC),Tampa, Florida, June 16-21, 2013.

Singh R. P. and Choudhury, D.“A review on modeling of railway foundation systemand it’s degradation”, Proceedings of IndianGeotechnical Conference, IGC-2013, GeotechnicalAdvances & Novel Geotechnical Applications(GANGA), IIT Roorkee, ISBN: 978-81-925548-1-5,Paper ID: 12Th-01, December 22 – 24, 2013, pp. 1-6, in CD.

Singh, A., Prasoon Meena, Shukla, S. and Sumit,S.“Plasmonic Nanoantenna for Wireless Communi-cations”. Materials Research Society Fall Meeting2013. Boston, MA, USA. 2013.

Singh, A., Prosoon Meena, Saxena, S. and Shukla,S.“Optical Antenna for Wireless Communication”, MRSSymposium Proceedings, 2013.

Singh, D.V., Zaman, M. and Commuri, S.“Comparison of Morphological Properties ofDifferent Types of Coarse Aggregates,” Air Field andHighway Pavements Conference, Edited by Imad L.Al-Qadi and Scott Murrell, (ISBN: 978-0-7844-1300-5), Transportation and Development Institute,Los Angeles, California, 2013, Doi: 10.1061/9780784413005.106, USA.

Singh, K., Chasta, N. and Shojaei Baghini, M.“Experimental Electrical Modeling of Soil for In SituSoil Moisture Measurement”, Proc. of ISED, 2013,Singapore.

Singh, K., Kartik, V. and Singh, R.“Modeling of Chatter-induced Instability in High-speed Micromilling of Ti-6Al-4V,” Proceedings ofthe 9th International Conference on MicroManufacturing in NTU Singapore, NTU, 2013,Singapore.

95

Singh, M., Kalaimani, R.K., Belur, M.N. and Iyer,S.V.“Decentralized controllability of multi-invertermicrogrids,” Proceedings of the IEEE InternationalConference on Industrial Technology (ICIT), CapeTown, South Africa, 2013.

Singh, R., Kulkarni, A.R. and Harendranath, C.S.“Dielectric and Piezoelectric Properties of KNNSynthesized using Colloidal Coating Approach”. AIPConference Proceedings, 1512, pp. 514-515, 2013.

Singh, S., Barick, K.C. and Bahadur, D.“Nanomagnetic Chelators for Removal of Toxic MetalIcons”, AIP Conference Proceedings. 1512, 2013,pp. 440-441.

Singha, A., Muralidharan, B. and Rajendran, B.“Analog Memristive Time Dependent Learning UsingDiscrete Nanoscale RRAM Devices,” InternationalJoint Conference on Neural Networks, 2014.

Sinha Avick, Gopalakrishnan, S. andBalasubramanian Sridhar“Numerical study of dynamics of spray formed by amultiphase jet,” Fortieth National Conference onFluid Mechanics and Fluid Power, Hamirpur, 2013,HP, India.

Sinha Deeksha, Kavitha Veeraruna andKarandikar Abhay“Load dependent Optimal ON-OFF policies inCellular Heterogeneous Networks”, Proceedings ofInternational Workshop on Indoor and OutdoorSmall Cells, WiOpt 2014.

Sinha S. and Sarkar S.K.“ZnO as Transparent Conducting Oxide by AtomicLayer Deposition”, in 39th IEEE PhotovoltaicSpecialists Conference, Tampa, Florida, June 2013.

“Effect of Partial Pressure of Precursors on AtomicLayer Deposited Zinc Oxide Films as TCO Materialin Solar Cell Application”,in 2nd InternationalConference on Power Science and Engineering, Paris,France, 2013.

Sinha, K. and Balasridhar,S.J.“A conservative turbulence model for shockdominated flows”, at the 5th European Conferencefor Aeronautics and Space Sciences, Munich,Germany, 2013.

Soam, A. and Dusane, R.O.“Dense Silicon Nanowires for ElectrochemicalCapacitor Application”, Proceedings of APEnergy2014, Conference, Brisbane, Australia, February 2014.

“Charge Storage Properties of SiNWs Grown byHot-Wire Chemical Vapor Process Technique asElectrodes in Electrochemical Capacitors”,

Proceedings of International Conference onAdvanced Nanomaterials and EmergingEngineering Technologies, ICANMEET, Chennai,July 2013.

Soam, A., Meshram, N.P., Kumbhar, A.A. andDusane, R.O.“Growth of High Density Silicon Nanowires using Tinas a Catalyst”, Proceedings of InternationalConference on Emerging Materials and Processes,ICEMP 2014, Bhubaneswar, 2014.

Somvanshi, P.R., Patel, A.K., Bhartiya, S. andVenkatesh, K.V.“Analysis of integrated insulin-mTOR signallingnetwork-diabetes perspective”, IFAC ProceedingsVolumes (IFAC-PapersOnline), 12 (PART 1), 2013,pp. 143-148.

“Numerical Investigation of Fluid structure interactionof elastic Leaflet in Incompressible Channel Flow,”Proceedings of 40th National Conference on FluidMechanics and Fluid Power (NCFMFP), NITHamirpur, 2013, Himachal Pradesh, India.

Soti, A.K. and Bhardwaj, R.“Numerical study of heat transfer enhancement viaflow-induced deformation of elastic plate in channelflow,” Proceedings of the ASME 2013 SummerBioengineering Conference, Sunriver, Oregon, 2013,WA.

Srikanth, T., Kumar Animesh and KarandikarAbhay“Finite Rate of Innovation Signals: QuantizationAnalysis with Resistor-Capacitor Acquisition Filter”,Proceedings of SampTA, 2013.

Srinivas, G., Dhingra, S.L. and Vedagiri, P.“Sustainable Economic Evaluation of AlternativeRural Routes Leading to a port through a Mining Area,”13th World Conference on Transportation Research(WCTR), Rio de Janeiro, July 15-18, 2013, Brazil.

Srinivasan Srikanth Gilmer Justin and SaksMichael“Composition Limits and Separating Examples forSome Boolean function Complexity Measures,” IEEEConference on Computational Complexity, 2013,pp.185-196.

Srinivasan Srikanth“On Improved Degree Lower Bounds for PolynomialApproximation,” Foundations of SoftwareTechnology and Theoretical Computer Science(FSTTCS), 2013, pp. 201-212.

Subbarao, S.S.V. and Rao Krishna, K.V.“Analysis of Household Activity and Travelcharacteristics in Mumbai Metropolitan Region

96

(MMR)”, Proceedings of the 13th World Conferenceon Transport Research, July 15-18, 2013, Reo deJaneiro, Brazil.

Suggisetti, P., Banerjee, D., Adari, R., Pande, N.,Patil, T., Ganguly, S. and Saha, D.“Room temperature ferromagnetism in thermallydiffuses Cr in GaN”, AIP Advances 3, 032143, 2013.

Sule,V.R.“Generalization of Boole Shannon expansion,consistency of Boolean equations and elimination byorthonormal expansion,” ArXiv.org/1306.2484v3,December 2013.

Sunny, M.R., Mulani, S.B., Sanyal, S., Pant, R.S.and Kapania, R.K.“An Artificial Neural Network Residual Kriging BasedSurrogate Model for Shape and Size Optimization ofa Stiffened Panel”, AIAA-2013-1689, Proceedingsof 54th AIAA/ASME/ASCE/AHS/ ASC Structures,Structural Dynamics, and Materials Conference,Boston, Massachusetts, USA, April 8-11, 2013.

Surendar, M., Singh, G., Bhattacharya, A.,Venkataraman, G. and Bharathi, P.A.“Snow Wetness Estimation based on POL-SARDecomposition Technique”, IEEE IGARSS’ 2013,Melbourne, Australia, July 21-26, 2013, pp. 3199-3202.

“Snow Wetness Estimation from Polarimetric SARImage”, Progress In Electromagnetics ResearchSymposium, Stockholm, Sweden, August 12-15, 2013,pp. 678-682.

“Improved Snow wetness estimation from fullypolarimetric SAR image”, Asia-Pacific Conferenceon Synthetic Aperture Radar (APSAR), September23-27, 2013, pp. 31-34, INSPEC Accession No.14026643.

Surya, K.S.“Continuous Wavelet Transform: A tool for detectionof hydrocarbon,” 10th Biennial InternationalConference & Exposition, Society of PetroleumGeophysicist, Kochi, 2013, p.120

Suryawanshi, R.K., Gedam, S.S. and Sankhua, R.N.“Advance methods for flood forecasting. Nationalseminar on climate change impacts on water resourcessystems”, Parul Institute of Engineering &Technology, Vadodara, India

“Digital flood estimation using advance geospatialtools”, 3rd International Conference on ClimateChange and Humanity - ICCCH 2014.

Swathi B. and Eldho T.I.“Meshless Method for Contaminant TransportModeling in Porous Media,” Proceedings of 6th

International Congress of Environmental Research,Abstract Vol., December 19-21, 2013, Aurangabad,India.

“Scope of Simulation of Groundwater Flow UsingMeshless Method, An Alternative Numerical Method”,Proceeding International Conference on Advancesin Water Resources Development & Management(AWRDM-2013), October 23-27, 2013, PunjabUniversity, Chandigarh, India.

“Simulation of Contaminant Transport in PorousMedia Using Meshless Method”, Proceedings ofInternational Conference on Hydraulics, WaterResources, Coastal & Environmental Engineering(HDROInternational-2013), December 4-6, 2013,IIT Madras, Chennai , India.

Tan R. R. and Bandyopadhyay S.“Pinch Analysis for Multi-Dimensional SustainableEnergy Systems Planning”, in Proceedings of the 4thinternational Conference on Advances in EnergyResearch (ICAER 2013), Mumbai, India, December10-12, 2013.

Taywade, U.W., Deshpande, A.A. and KumarSudarshan“Formation of spinning flames in stepped tubecombustors,” 10th International conference on flowdynamics, Tohoku University, Sendai Japan,November 25-27, 2013.

Tejaswini, D.N., and Karmakar, S.“Modelling Impreciseness of Trophic State Levels forEutrophication Assessment.” Proceedings of 4thInternational Conference on EnvironmentalEngineering and Application (ICEEA), held duringAugust 24-25, 2013. Singapore.

“A Multivariate Statistical Approach to QuantifyTrophic States of Lentic Water Bodies,” Proceedingsof the 16th International Conference on DiffusePollution and Eutrophication (DIPCON),International Water Association (IWA), held duringAugust 18-23, 2013, Beijing, China.

Tejaswini, D.N., Karmakar, S., Pradhan, M.M. andPalkar, V.S.“A Framework for Assessing Eutrophication:Application to a Cluster of Lakes in Thane City, India.”Proceedings of International Conference ofEstuaries and Coastal Areas in Times of IntenseChange, Elsevier, held during October 13-17, 2013,Shanghai, China.

Thakare M.S., Bandyopadhyay S. and Ghosh P.C.“Design and performance evaluation of prototypePhotovoltaic Thermal (PVT) collector”, inProceedings of the 4th International Conference onAdvances in Energy Research (ICAER 2013),Mumbai, India, December 10-12, 2013.

97

Thakur, D., Srikant, S. and Akella, M.R.“Adaptive attitude-tracking control of spacecraft withuncertain time-varying inertia par,” in AAS/AIAAAstrodynamics Specialist Conference, August 11-15,2013.

Thomas, A., Eldho T.I. and Rastogi A.K.“Simulation of Sea Water Intrusion in CoastalConfined Aquifers Using a Meshfree Method”,Proceedings of International Conference onHydraulics, Water Resources, Coastal &Environmental Engineering (HDROInternational-2013), December 4-6, 2013, IIT Madras, Chennai , India.

Tripathi Jai Narayan, Mahajan Ashutosh,Mukherjee Jayanta, Chhabra Nitin Kumar, NagpalRaj Kumar and Malik Rakesh“Decoupling Network Optimization in High SpeedSystems by Mixed-Integer Programming”, ISCAS2014, Melbourne, Australia.

Tripathi Jai, N., et.al,“Top Down design Methodology for EnhancedElectromagnetic Band Gap Structures”, Designcon2014, Santa Clara, USA.

Tripathi Jai, N., Mukherjee, J., Apte Prakash,Nagpal Raj Kumar, Chabra Nitin and Malik, R.“A Novel EBG Structure with Super-WidebandSuppression of Simultaneous Switching Noise in HighSpeed Circuits,” IEEE ElectricalPerformance ofElectronic Packaging and Systems (EPEPS)-2013,Austin, USA.

Tripathy, T. and Sinha, A.“Guidance of an Autonomous Agent for CoverageApplications using Range Only Measurement”,Proceedings of AIAA Guidance, Navigation, andControl Conference, MA, USA, DOI: 10.2514/6.2013-5095, August 2013.

Trivedi, P., Bandyopadhyay, B., Chaudhuri, S.K.and Mahata, S. K.“Roll stabilization: A higher order sliding modeapproach”, 11th IEEE International Conference onIndustrial Informatics (INDIN), Bochum Germany,July 2013, pp. 420-425.

Trivedi, R.R., Joglekar, M.M., Shimpi, R.P. andPawaskar, D.N.“Shape optimization of electrostatically drivenmicrocantilevers using simulated annealing toenhance static travel range,” Proceedings of SPIE -The International Society for Optical Engineering,8923, art. no. 89234W, Melbourne, 2013, Australia.

Turkar Varsha, De Shaunak, Ponnurangam, G.G.,Deo Rinki, Rao, Y.S. and Das Anup.“Classification of RISAT-1 Hybrid Polarimetric Datafor Various Land Features”, Asia-Pacific Synthetic

Aperture Radar (APSAR) Conference held in Tsukuba,Japan, Proceedings of IEEE Xplore 2013, pp.494-497.

Turkar Varsha, De Shaunak, Rao, Y.S., ShitoleSanjay, Bhattacharya Avik and Das Anup Kumar.“Comparative analysis of classification accuracy forRISAT-1 compact polarimetric data for various landcovers”, IGARSS 2013 (IEEE Geosci. & RS society),Melbourne, 2013, pp.3586-3589.

Uday Bhaskar, R.V.S., Tirumkudulu, M.S. andVenkatesh, K.V.“Mathematical modelling for collective chemotaxisand aerotaxis response of Escherichia coli,” IFACProceedings Volumes (IFAC-PapersOnline), 12(PART 1), 2013, pp. 175-180.

Upadhyay, N., Tiwari, N., Fursenko, R., Minaev,S. and Kumar Sudarshan“Experimental studies on flame propagation behaviorin suddenly converging tubes near quenchingdistances,” at 23rd National Conference on ICEngines and Combustion, National Institute ofTechnology Surat, India, December 13-16, 2013.

Upadhyaya Shruti and Ramsankaran RAAJ“Review of satellite remote sensing data based rainfallestimation methods,” Proceedings of HYDRO 2013International, IIT Madras, December 4-6, 2013,Chennai.

Ushir,V., Desai, K.P., Naik, H.B. and Atrey, M.D.“Experimental Studies on Thermoacoustic Engine withGaseous Mixtures,” Advances in CryogenicEngineering, Anchorage, Alaska, Vol. 59A(Proc.1573), 2013, pp. 784-789, USA.

Vachhani Leena“Education on Architecture Development forEmbedded Controllers”, In Proceedings of IFACSymposium on Advances in Control Education(ACE), Sheffield(s), UK, August 2013.

Vadabhat, V. and Banerjee, R.“Modelling of Demand Side Management options forcommercial sector in Maharashtra.” in Proceedingsof the 2013 International Conference on AlternativeEnergy in Developing Countries and EmergingEconomies (2013 AEDCEE), Bangkok, Thailand, May30-31, 2013.

Vadera, D. and Gudi, R.D.“Scheduling incorporating waste management usingdecomposition approaches,” IFAC ProceedingsVolumes (IFAC-PapersOnline), 10 (PART 1), 2013,pp. 535-540.

Vaidya Avinash, R., Mukherjee, J. and Mishra, S.K.“High-Gain Broad-Band Planar Antennas with Feed

98

Patch Array and Partially Reflective Surfaces”, AsiaPacific Conference on Communication, Bali,Indonesia, 2013.

Varma Surender Gadhiraju, Banerjee Biplab,Muhuri Arnab, Bhattacharya Avik and BuddhirajuKrishna Mohan“Radon Transform Based Edge Detection for SARImagery”, Proceedings of IEEE Geoscience andRemote Sensing Symposium (IGARSS2013),Melbourne, August 2013.

Vasi, J.“Research programmes for photovoltaics inSERIIUS,” (Plenary Talk), Intersolar India 2013,Mumbai, India, 2013.

Vasu, T.S. and Bhandakkar, T.K.“Contact of Elastic Layered Substrate System With aRigid Surface Under Plane Strain Condition,”International Conference on Computer AidedEngineering (CAE-2013), IIT Madras, 2013, Chennai,India.

Vasudevan N. and Bhattacharyya Pushpak“Little by Little: Semi Supervised Stemmingthrough Stem Set Minimization”, International JointConference on Natural Language Processing(IJCNLP 2013), Nagoya, Japan, October 14-18,2013.

Venkatesh, K.V.“Optical control demonstrates switch-like PIP3dynamics underlying the initiation of immune cellmigration”, Proceedings of the National Academyof Sciences of the United States of America, 110 (17),2013, pp. E1575-E1583.

Venugopal, A., Agrawal, A. and Prabhu, S.V.“Spanwise correlation in the wake of circular cylinderand normal plate placed inside a pipe,” 66th AnnualMeeting of the American Physical Society’s Divisionof Fluid Dynamics (DFD), Pittsburgh, November 24-26, 2013, United States.

“Flow over a circular cylinder placed inside a pipe,”14th European Turbulence Conference, ENS Lyon2013, France.

“Investigation on flow around cylinder with parallelslit in a circular pipe using flow visualizationapproach,” 66th Annual Meeting of the AmericanPhysical Society’s Division of Fluid Dynamics(DFD), Pittsburgh, 2013, United States.

Venugopal, A., Orda, L., Agrawal, A. and Prabhu,S.V.“Symmetric vortex shedding in the wake of circularcylinder placed inside a pipe,”66th Annual Meetingof the American Physical Society’s Division of Fluid

Dynamics (DFD), Pittsburgh, November 24-26,2013, United States.

“Investigation of Flow around Cylinder with ParallelSlit in a Circular Pipe using Flow VisualizationApproach,” 66th Annual Meeting of the AmericanPhysical Society’s Division of Fluid Dynamics(DFD), Pittsburgh, November 24-26, 2013, UnitedStates.

Verma Jugal K., Masuti Shreedevi and MandalMousumi“Normal Hilbert polynomials,” Proceedings ofInternational Conference on Commutative Algebraand Algebraic Geometry, Indian Institute of Science,Bangalore, Ramanujan Mathematical SocietyLecture Notes Series, Vol. 17, 2013, pp.139-166.

Vignesh, R., Jothiprakash, V. and Sivakumar, B.“Classification of Catchments Using Spectral andDimension Concepts,” XVIII Conference onHydraulics, Water Resources, Coastal andEnvironmental Engineering (HYDRO 2013INTERNATIONAL), Department of OceanEngineering, IIT Madras, India, December 4-6, 2013,pp 1380-1385.

Vijay A.S., Doolla S. and Chandorkar M. C.“Voltage Sag Emulation using Power ElectronicConverters: IECON 2013”, Presented at IEEEIndustrial Electronics Conference, held in Vienna,November 10-13, 2013.

Vijayasree, B.A., Eldho, T.I. and Viswanadham,B.V.S.“Physical Model Studies on Bridge Piers with RaftFoundation and Aprons as A Scour ProtectionMeasure”, Proceedings of. International Conferenceon Hydraulics, Water Resources, Coastal &Environmental Engineering (HDROInternational-2013), December 4-6, 2013, IIT Madras, Chennai ,India.

Vikas M., Ajay B. and Eldho T.I.“Numerical Simulation of Pump Sump FlowCharacteristics”, Proceedings of InternationalConference on Integrated Water, Waste Water &Isotope Hydrology, Bangalore University, Bangalore,July 25-27, 2013, pp166-174.

Vinoth P., Singh, A.P. and Chatterjee, A.“Analysis of MHD bow shock structuree with higher-order numerical schemes” 3rd National Symposiumon Shock waves, Mumbai, February 2014.

Vishwesh A. Vyawahare and Nataraj, P.S.V.“Analysis of Fractional-order Telegraph Model forNeutron Transport in Nuclear Reactor with SlabGeometry”, European Control Conference, Zurich,Switzerland, July 17-19, 2013.

99

Viswanadham, B.V.S. Guha A, Sudarshan, B.V.,Kundu, S. and Bhattacharjee, D.“Centrifuge model tests on the measurement ofimpact energy on bridge pier foundations embeddedin sand,” Proceedings of 8th InternationalConference on Physical Modelling in Geotechnics2014, Perth, Australia, Christophe Gaudin & DavidWhite (Editors), CRC Press, London (Pubs.), Vol. 2,2014, pp.1061-1066.

Vyas Pranjal, Bankey Neeraj and Vachhani Leena“Efficient Techniques for Parallel Visual Com- passImplementation for a Mobile Robot”, in Proceedingsof International Conference on Robotics,Automation and Manufacturing (IRAM), IIT Indore,India, 2013.

Waghmare, K., Beeranur, R. and Singh, R.“Characterization of Vacuum Brazing of Ti6Al4V AndAlumina With Cu-Ag Brazing Alloy via Substrate-Induced Reactive Mechanism,” ASME MSECConference, University of Wisconsin, 2013, Madison.

Wankhade R. L. and Bajoria, K.M.“Assesment of higher order shear deformation theoryfor stability analysis of piezolaminated plate”,International Conference on Recent Advances inComposite Materials (ICRACM), February 18-22,2013, Goa, India.

Warier Rakesh, Sinha Arpita and Srikant, S.“Relative Attitude Trajectory Tracking Using Line ofSight Measurements under Spacecraft PositionDynamics”, Third International Conference onAdvances in Control and Optimization of DynamicalSystems, March 2014.

Warriem Jayakrishnan M., Murthy Sahana andIyer Sridhar“Training in-service teachers to do action research ineducational technology”, IEEE InternationalConference on Technology for Education (T4E),Kharagpur, India, December 2013.

“A model for active learning in synchronous remoteclassrooms: Evidence from a large-scaleimplementation”, International Conference onComputers in Education (ICCE), Bali, Indonesia,November 2013.

Warrier, R. and Sinha, A.“LOS Based Attitude Alignment of two Spacecraft inFormation”, International Conference on SpacecraftFormation Flying Missions and Technologies(SFFMT), Munich, Germany, May 2013.

Watvisave D.S., Puranik B.P. and Bhandarkar U.V.“A Hybrid MD-DSMC Algorithm to Model WallEffects in a Micro-scale Shock Tube,” Proceedingsof the 29th International Symposium on ShockWaves, Madison, WI, 2013, USA.

Xiaomin Chen, Jukan Admela and GumasteAshwin“Multipath de-fragmentation: Achieving better spectralefficiency in elastic optical path networks”,INFOCOM 2013, pp. 390-394, 2013.

Yadav Pradeep Kumar, Shah Sandeep, JoshiPrathamesh, Shrivastava Khushboo, RastogiDivyam, Gundeti Akshay and Karunakaran, K.P.“Semi-Autonomous Coaxial Twin Contra-RotorHelicopter,” ICTUS, 2013, Jaipur.

Yadav, H., Agrawal, A. and Srivastava, A.“Characterization of pulsating submerged impingingjet, A PIV study,” ISHMT-ASME Heat and MassTransfer Conference, 2013, IIT Kharagpur.

Yadav, S., Bajpai, V., Kashid, M. and Singh, R.“Burr Formation Analysis at High Speed MicroDrilling of Ti6Al4V,” Proceedings of the 7thInternational Conference on MicroManufacturing,University of Victoria, 2013, Canada.

Yamasani, P., Yadav, S. and Kumar Sudarshan“Electric power generation from microcombustors,”40th National conference on fluid Mechanics andFluid Power, National Institute of TechnologyHamirpur, India, December 12-14, 2013.

Yazar, K.U., Date, P.P. and Narasimhan, K.“Exprimental Studies on Single Point IncrementalForming of Metallic Sheets,” International DeepDrawing Research Group Conference, Paris, 2013,France.

Yelve N P, Mitra, M. and Mujumdar, P. M.“Experimental and Finite Element Study forQuantification of Crack in an Aluminium Plate usingNonlinear Lamb Wave”, Asia-Pacific Conference onNon-Destructive Testing, Renaissance ConventionCenter, Mumbai, November, 2013.

“Nonlinear effect of debonding of wafer typepiezoelectric actuator on the behaviour of Lambwave”, SPIE Smart Structures and Materials+Nondestructive Evaluation and Health Monitoring,San Diego, USA, March 2014.

Yu-Tseh Chi, Mohsen Ali, Rajwade Ajit and JeffreyHo“Block and Group Regularized Sparse Modeling forDictionary Learning”, CVPR 2013, pp. 377-382,2013.

Zende, A. and R. Nagarajan“Evaluation of surface water storage-supplyinfrastructure of river basin in semi-arid region”, inproceeding of River Basin Management VII, NewForest, UK, May 22-24, 2013, pp. 167-176.