The natural choice in architectural composite panel systems...range of composite panel solutions offer the specifier complete assurance in the event of exposure to heat or flames

The natural choice in architectural

composite panel systems

3

Eurobond is the leading designer and manufacturer of non-combustible core internal and external wall and ceiling solutions in the UK. Manufactured using a fire resistant stone wool insulation with a low environmental impact, the Eurobond range of composite panel solutions offer the specifier complete assurance in the event of exposure to heat or flames.

Our reputation has been built on quality

for more than 30 years

Morrisons, Doncaster

4

a wide range of products able to fully deliver and assure total confidence Eurobond Laminates is the leading UK designer and manufacturer of non-combustible core internal and external wall and ceiling composite panels. The stone wool core offers a low environmental impact, robustness, and tested fire resistance.

Continuous investment in product development, testing and manufacturing technology guarantees high quality products that exceed customer expectations. All products are fully tested and supplied with comprehensive design details and installation guidance - all to ensure top performance for the life of the building.

All Eurobond panel systems provide passive fire protection and are tested and approved where appropriate to BS476 Part 22, BS EN 1364 Part 1, LPS1208, LPS1181 Grade Ext A, CE marked, FM Global FM4880 and Dubai Civil Defense Product Approval. At their core is a non-combustible stone wool insulation which guarantees the highest level of fire performance.

From ‘Cradle to Cradle’ all our panel systems have a low environmental impact. At end of life, both the steel facings and insulation can be recycled with no appreciable loss of material.

Choosing a Eurobond composite panel from our comprehensive range couldn’t be easier:

Through-fix horizontal or vertical panel system

Multiple versatile contemporary facade finishes

Easy installation system

Non-combustible trapezoidal roof system

europanel

rockspan

rainspan

firemaster

roofspan

contemporary building panel systems

external wall panel system

rainscreen support panel system

internal wall and ceiling panel system

excellent fire resistance, acoustics & energy efficiency

pages 10 - 13

pages 14 - 19

pages 20 - 23

pages 24 - 27

pages 6 - 9

Aesthetic secret-fix joints

5

Non-combustible All Eurobond composite wall panel systems are manufactured with a non-combustible stone wool core. Panel systems are available offering fire resistance of up to 4 hours.

Low environmental impact Eurobond cores have zero Ozone Depleting Potential (ODP) and zero Global Warming Potential (GWP). At the end of its useful life, all panel steel and insulation can be recycled and made into virgin material.

Thermally efficient All Eurobond products are engineered to help fulfil the energy and air leakage requirements demanded for the envelope of modern buildings. Relevant panel construction details have been thermally modelled, using the BRE software package, Trisco.

Acoustically sound Eurobond’s range of composite wall panels offer acoustic solutions developed to make Approved Document E (2015) sound easier.

Architecturally flat Eurobond panels are manufactured with a stonewool core which has that have dimensional stability.

europanel rockspan firemaster rainspan roofspan

Product Performance S5,

S5 Extra Lite Extra Ultima Lite Extra Ultima Ceiling

FS F5 Extra

G Series

LPS1181 Part 1 EXT-A ● ● ● ● ● ● LPS1181 Part 2 INT- 1 ● ● ● ● LPS1208 ● ● ● ● ● ● ● ● ● ● Euroclass A1 rated Core ● ● ● ● ● ● ● ● ● ● ● CFC, HCFC and HFC - free core ● ● ● ● ● ● ● ● ● ● ● Zero ODP ● ● ● ● ● ● ● ● ● ● ● Zero GWP ● ● ● ● ● ● ● ● ● ● ● Fast construction ● ● ● ● ● ● ● ● ● ● ● Factory mitred corners ● ● ● ● ● ● Secret-fix joint ● ● Module flexibility ● ●

Thermal Performance u value (W/m2K)

50mm core thickness 0.69 0.69 0.76 75mm core thickness 0.51 0.54 0.51 0.54 0.51 0.54 0.54 100mm core thickness 0.39 0.40 0.39 0.40 0.39 0.40 0.40 0.40 0.40 125mm core thickness 0.31 0.33 0.31 0.33 0.31 0.33 0.33 0.33 150mm core thickness 0.26 0.27 0.26 0.27 0.27 0.26 0.27 0.27 0.27 0.27 0.24 175mm core thickness 0.22 0.23 0.22 0.23 0.22 0.23 0.23 0.23 200mm core thickness 0.19 0.20 0.19 0.20 0.20 0.19 0.20 0.20 0.20 0.20 0.18 240mm core thickness 0.17 0.18 0.17 0.18 0.17 0.18 0.18 0.18 0.18

Fire Resistance (BS476 pt 22 / EN1364-1 / LPS1208)

1hr fire resistance integrity & insulation ● ● ● ● ● ● ● ● ● ● ● 2hrs fire resistance integrity & insulation ● ● ● ● ● ● ● ● ● 4hrs fire resistance integrity & insulation ● ●

50mm core thickness Integrity (mins) - - Insulation (mins) - -

75mm core thickness Integrity (mins) 60 60 60 60 60 60 Insulation (mins) 30 60 30 60 30 60

100mm thick panel Integrity (mins) 60 60 90 120 90 120 60 120 120 Insulation (mins) 30 60 60 120 60 120 60 120 120

125mm thick panel Integrity (mins) 90 90 90 120 90 120 60 120 Insulation (mins) 60 90 60 120 60 120 60 120

150mm thick panel Integrity (mins) 120 120 120 120 240 120 120 240 120 120 120 Insulation (mins) 90 120 90 120 240 90 120 240 120 120 120

175mm thick panel Integrity (mins) 120 120 120 120 240 120 120 240 180 120 Insulation (mins) 90 120 90 120 240 90 120 240 180 120

200mm thick panel Integrity (mins) 120 120 120 120 240 120 120 240 180 120 Insulation (mins) 90 120 90 120 240 90 120 240 180 120

240mm core thickness Integrity (mins) 120 120 120 120 240 120 120 240 180 Insulation (mins) 90 120 90 120 240 90 120 240 180

Sound Performance Weighted sound reduction index Rw (dB)

50mm thick panel 30 30 29 75mm thick panel 31 31 30 31 30 31 31 100mm thick panel 32 33 31 33 31 33 33 33 33 125mm thick panel 32 33 32 33 32 33 33 33 150mm thick panel 33 34 32 34 34 32 34 34 34 34 35 175mm thick panel 34 35 33 35 33 35 35 35 37 200mm thick panel 34 36 34 36 36 34 36 36 36 36 38 240mm thick panel 34 36 34 36 34 36 36 36 36

Facings (Surface Finishes)

Satin Line (micro rib) ●S5 ● ● ● ● ● ● ● Architecturally Flat ●F5 ● ● ● ● ● ● ● ● ● Minibead (Firemaster only) ● ● ● ●

Pre-Finished Steel by Tata Steel

Colorcoat HPS200 Ultra® ● ● ● ● ● ● ● ● ● ● ● Colorcoat Prisma® ● ● ● ● ● ● ● Advantica® L Control Internal (Foodsafe) ● ● ● ● ● ● ● ● ● Colorcoat® PE25 Internal (RAL x Liner) ● ● ● ● ● ● ● ● ● ● Colorcoat® High Reflect Internal ● ● ● ● ● ● ● ● ● ●

For specific fire performance specification of products, please contact Eurobond’s Technical Department.

7

The Europanel system combines high performance with a crisp architectural aesthetic featuring its secret fix joint detail.

Europanel combines architectural style and design freedom with low environmental impact and passive fire protection. Designed with concealed fasteners, Europanel has five standard configurations within the range. Each system has been developed as a ‘total wall’ solution through the integration of glazing and other building components.

europanel

8

• Europanel combines architectural style and design freedom with low environmental impact and passive fire protection.

• Five standard configurations within the range with each system developed as a ‘total wall’ solution through the integration of glazing and other building components.

• Modular flexibility in 50mm increments from 600 to 1200mm. Flat or micro-rib external face profiles.

• Architecturally flat with range of visually enhancing ancillaries and options.

• Two hour fire resistance and non-combustible stone wool core offers passive fire protection.

• Long Span Capability. Specific structural guidance available from Eurobond’s technical team.

• Europanel offers ‘as tested’ air tightness of 1m³/hr/m² - well in excess of requirements in Building Regulations across the UK.

• In the case of high rise buildings the systems are tested to BS 8414 - Part 1 and meet guidance in BR135 – “Fire performance of external thermal insulation for walls of multi-storey buildings.”

• Low environmental impact, thermal performance and high recycled material content will positively support a BREEAM assessment.

• Library of comprehensive design details to ensure top performance for the life of the building.

• BIM files are available in a number of file formats.

• NRG passive energy saving internal steel face - see page 31 for details.

Features & Benefits of the Europanel System

A high performance EPDM gasket is site installed and locates within the aluminium section to provide a positive location and retention of the gasket.

The G series of configurations are available with 12mm (G12) gaskets to give your building envelope a striking visual ‘grid’ effect with varying widths.

9

G SeriesThe Europanel G (Gasket) series vertical and horizontal cross panel jointing creates the impression of a wider uniform frame around individual panels, similar to that of a bi-modular system.The horizontal joint houses an aluminium section, which is factory fitted to each panel.

These ranges provide a clean building exterior through Europanel’s classic secret fix joint. A dense stone wool core provides the precision engineered base to an architecturally flat surface, and the 5mm joint gap provides a fine pencil line joint horizontally between panels and across the building envelope.

The S5 option combines the same pencil line joint with a satinline (microrib) profiled panel face.

The V-groove is available with panel system Europanel F5 and can be applied to the full range of panel thicknesses and finishes.

F5, S5 Series & V-groove

europanel

F5 SERIES

S5 SERIESG12 SERIES 12mm

V GROOVE

Rockspan is a through-fix, cost effective external wall panel solution providing passive fire protection for large scale buildings.

Rockspan can be fixed both vertically and horizontally and the joint detail enables efficient installation.

rockspan

11

• Long fire-rated spans of up to 7.5m (LPS1208) and fire resistance of up to 4 hours.

• Non-combustible stone wool core offers passive fire protection

• Through fix joint detail enables efficient construction methods that promote single component wall construction.

• Creates a weather tight envelope quickly to help shorten build programmes.

• Long span capability of Rockspan can reduce secondary steelwork and build costs.

• Rockspan can be installed both vertically and horizontally and finished with an external Satin Line [Micro-rib] or architecturally flat profile.

• Available with Colorcoat HPS200 Ultra® and Colorcoat Prisma® pre-finished steel by Tata Steel.

• ‘As tested’ air tightness of 1m³/.hr/m² - well in excess of requirements in Building Regulations across the UK.





North Hykeham Energy Recovery Centre, Lincoln

12

Features & Benefits of the Rockspan system

Rockspan LiteManufactured using the lowest density core of the Rockspan range. The panel system achieves up to 90 minutes fire performance without the need for joint stitching and is only available in a Satin Line (Micro Rib) profile finish.

Rockspan ExtraManufactured using a higher density core than Rockspan Lite, the panel system can provide up to 2 hours fire performance with increased acoustic performance and spanning capabilities.

Rockspan UltimaOffers the most comprehensive fire performance of the entire Eurobond external panel range. Up to 4 hours fire resistance can be achieved through the combination of joint stitching and maximum core density.

Through fixing enables efficient construction, eliminating wet trades and promoting single component through wall construction. Rockspan can be installed both vertically and horizontally. It can be finished with an external Satin Line (Micro Rib) or Architecturally Flat profile and is ideal for application within the construction sector.

Rockspan is the cost effective external wall panel solution providing passive fire protection for large scale buildings and is suited to both vertical and horizontal installation.

rockspan

13

ROCKSPAN JOINT DETAIL

SATIN LINE

15

Rainspan uniquely blends the benefits of a composite panel and the flexibility of varying aesthetic rainscreens to provide greater freedom for architectural expression.

rainspan

16

Tesco, Old Trafford Manchester

• Combines the benefits of a composite panel and the flexibility of varying aesthetic rainscreens to provide greater freedom for architectural expression.

• Fully tested with comprehensive details to ensure top performance for the life of the building.

• Two hour fire resistance even in long span conditions of up to 7.5 metres.

• Non-combustible stone wool core offers passive fire protection.

• The ideal structural support for many rainscreen systems and long span capability of Rainspan, can reduce secondary steelwork and build costs.

• Combines ease and speed of installation to create a weather tight building envelope early on in the build programme.

• The stone wool core at the heart of Rainspan is an excellent thermal insulator and helps to reduce operational carbon emissions.

• Rainspan offers ‘as tested’ air tightness of 1m³/.hr/m² - well in excess of requirements in Building Regulations across the UK.


• The façade installation can be removed from the critical path to simplify the construction process and help reduce costs.

• The flat surface of Rainspan reduces the complexity of fixing the support structure for the rainscreen façade.


Features & Benefits of the Rainspan System

METAL STONE TERRACOTTA BRICK TILE

RENDER ROCKPANEL

17

Rainspan offers clients, architects and contractors a complete façade solution and the range of rainscreen options available provides real flexibility in terms of both design and appearance. It is fully tested with comprehensive details to ensure top performance for the life of the building.

Rainspan provides the perfect structural support for rainscreen systems, and combines ease and speed of installation to create a weather tight building envelope early on in the build programme.

rainspan

STRATIFIED TIMBER TIMBER URBAN GLASS CERAMIC

RAINSPAN PANELS, SYSTEM SUPPORT & METAL CASSETTE RAINSCREEN

Be creative with rainspan

18

Gilmoss Recovery Centre, Merseyside

The design freedom provided by the Rainspan façade system is perfectly complemented by proven ‘life-of-the-building’ performance to offer a building solution that meets fast track construction techniques and the architectural excellence demanded from modern building envelopes.

Rainspan offers the architect an innovative and versatile solution and brings exciting new colour and texture combinations to the construction industry, with the reassurance that it is fully industry tested and approved.

Rainspan opens the door to architectural flexibility ensuring that challenging designs are easily reproduced and can create unique building externals suitable for a range of building types, from one-off iconic designs to modern commercial developments.

Eurobond has a dedicated team of technical services and support engineers, with expert knowledge to provide guidance at all stages of the design and construction process to ensure the breadth of creativity offered by Rainspan delivers buildings that exceed expectations.

19

Atrium, Cardiff

The Factory, Longbridge, Birmingham

20

Heathrow Terminal 5

The Firemaster system has been developed as a ‘total internal wall and ceiling’ solution ideally suited for the construction of non load bearing internal partition walls, and ceilings.

The approved system provides a tested fire resistance in order to perform as internal firewalls, ceilings or compartmentation walls.

21

firemaster

• Available in standard 1200mm width with range of surface profiles - architecturally flat, mini bead and micro rib.

• Tested fire performance of the complete wall construction not individual components and hence gives reassurance of how the wall would protect in an actual fire incident.

• Non-combustible stone wool core offers passive fire protection.

• Able to meet fire resistance performance of up to 4 hours.

• Fire rated spans of up to 12m allow easy floor to ceiling installation.

• Quick, single component gives dry installation.

• Panels can be installed without the need for scaffolding and with minimal on-site handling.

• The panels are manufactured to the exact specification for the project with on-site cutting and waste kept to a minimum.


• Independent third party research found Firemaster systems to be a cost effective method of construction for two hour fire resistance walls with cost savings of up to 40% per m² compared to other traditional constructions.

• Wall and ceiling solutions are simple and quick to install but also demountable to allow the internal partitions to be altered ‘future proofing’ the use of buildings such as warehouses, factories and offices.

• Firemaster is available with a foodsafe laminate option using Advantica® L Control by Tata Steel. This provides an anti-static internal surface. Firemaster is also available in a stainless steel finish.




22

Features & Benefits of the Firemaster System

Firemaster is ideally suited for the construction of non load bearing internal partition walls and ceilings.

This panel system is ideal for use in data centres, food processing and storage applications, along with micro electronics facilities and pharmaceutical applications, where protected zones or clean rooms are often required.

firemaster

23

Firemaster Wall LiteFiremaster Wall Lite gives the optimum balance between fire performances, cost, weight, and has been designed specifically as a practical, contractor friendly solution. Easy to install, Firemaster Wall Lite acts as a superb internal lining, wall or partition and can provide up to 2 hours fire resistance.

Firemaster Wall ExtraFiremaster Wall Extra has undergone extensive research to become a class leading fire rated wall panel, exclusively designed for internal use providing up to 2 hours fire resistance. Durability, structural integrity and fire performance were at the forefront of this systems development. Thoroughly proven and tested, this panel system is ideal for a wide range of applications.

Firemaster Wall UltimaFiremaster Wall Ultima has been developed to provide the perfect solution for compartmentation of high risk areas where up to 4 hours fire resistance is required. In the event of a fire this panel system can help to increase business continuity by offering the highest level of performance.

Firemaster CeilingFiremaster Ceiling is a class leading fire-rated ceiling panel suitable for both walk on (access and maintenance) and non walk on use. It’s the ideal solution to compartmentalise a building when stock protection is a priority as it can provide up to 2 hours fire resistance.

Firemaster is our ‘internal wall and ceiling’ solution. It is insulated, sealed and available with a food safe coating; providing a smooth, anti-static internal surface.

The Roofspan trapezoidal roof panel system offers excellent fire resistance, acoustics and energy efficiency.

Roofspan is manufactured with a high density non-combustible stone wool core that provides passive fire resistance.

roofspan

25

26

• Non-combustible stone wool core offers excellent reaction and resistance to fire of up to 120 minutes.

• Cover width of 1m and panel thickness of 50mm to 200mm offers cost effective roof solution for wide range of buildings.

• Can be applied to a structure with a minimum 40⁰ pitch (post deflection)

• Available with HPS200 Ultra® and Colorcoat Prisma® pre-finished steel by Tata Steel.

• At the end of a building’s lifespan constituent materials can be fully recycled.

• Roofspan is both quick and cost effective to install, and is ideally suited for new build and refurbishment work on office, health, education, retail, sport and leisure and major infrastructure projects.

• Roofspan is available with Eurobond’s NRG passive energy saving internal steel face.

ROOFSPAN JOINT DETAIL

Features & Benefits of the Roofspan System

RoofspanRoofspan is a trapezoidal profile composite roof panel, with a universal profile of 37.250.1000 to integrate with rooflights and photovoltaics / solar panels.

27

Roofspan delivers a high fire and acoustic performance offering a complete building envelope solution when combined with a Eurobond composite wall panel.

ROOFSPAN JOINTING ROOFSPAN RIDGE DETAIL

roofspan

ROOFSPAN

28

Eurobond has BIM files available for its range of stone wool core internal and external wall and ceiling composite panels. It includes material colours and COBie datasheet parameters and the designer is supported by a wide range of construction details.

The files are available in a number of file formats.

Available at eurobond.co.uk/bim or by contacting Eurobond Laminates Technical Service team on 02920 776677

[email protected]

bim

29

Eurobond provides a comprehensive Technical Service which can assist in correct specification, detailing and installation of panel systems.

In depth fire performance knowledge

Eurobond has extensive knowledge of the performance of composite panels in fires developed over many years from a wide range of standard and bespoke fire tests as well as working closely with leading fire engineers.

This allows us to:

• Provide guidance in selecting the most appropriate Eurobond products to achieve the required fire performance

• Provide correct detailing for each product

All Eurobond products are:

• Zero ozone depleting potential and zero global warming potential

• Full Life Cycle Assessed contributing to excellent chance of achieving a high rating in a BREEAM assessment

• Assessed to BES 6001 Responsible Sourcing of Construction Products, ISO 9001:2008 and ISO14001:2004

• Fully compliant with relevant Building Regulations and Technical Handbooks

• High in recycled material content Fully recyclable at end of life

Training

Highly experienced site engineers are available to carry out site training.There is also a comprehensive range of training courses which can be conducted at customer premises or at the Eurobond head office.

This includes:

• Site training

• Fire performance guidance

• Load span calculations

• Bespoke CAD details

Eurobond research and development staff are continually seeking to improve the performance of existing products and develop new ideas. Experience gained through research and development allows Eurobond to speak with authority on the performance of its panel systems, confident in the knowledge that advice given is based on information gained through testing, prototyping and practical experience.

Members of Eurobond’s Technical Department are available to attend site meetings to provide expert technical advice at the design stage, during installation and post-installation.

Sales team

Regionally based sales and product specialists are available to provide advice, presentations and project specific guidance.

Project specific design advice

As well as the standard information and range of details available, project specific information can be developed to cover:

• Load/span calculations

• Thermal and acoustic calculations

• Bespoke CAD details

• NBS Specifications

• Project specific wind load modelling tool

• BIM

technical service and support

30

Colorcoat® by Tata Steel products & services

The Colorcoat® brand provides the recognised mark of

quality and metal envelope expertise exclusively from Tata Steel. For over 50 years

Tata Steel has developed a range of technically leading Colorcoat® pre-finished steel products which have been comprehensively tested and manufactured to the highest quality standards. Colorcoat® products are supported by a range of services such as comprehensive guarantees, colour consultancy and technical support and guidance.

To ensure the long-term performance and appearance of the building, it is important that the pre-finished steel product is specified alongside the cladding system. To secure the peace of mind that comes from a rigorously manufactured and tested product from Tata Steel, ensure Colorcoat® as well as the individual product name is specified for your cladding system e.g. Tata Steel Colorcoat HPS200 Ultra®.

Colorcoat HPS200 Ultra® by Tata SteelColorcoat HPS200 Ultra® by Tata Steel provides exceptional performance and corrosion resistance for building envelope applications.

It is backed up with extreme testing and real world global data to demonstrate the best combination of excellent colour stability, gloss retention and outstanding durability.

Key benefits include:

• Optimised Galvalloy® metallic coating for exceptional corrosion resistance and cut edge protection.

• Surpasses requirements of Ruv4 and RC5 as per EN 10169:2010 proving excellent colour and gloss retention and corrosion resistance.

• Scintilla® embossed as a mark of authenticity from Tata Steel.

• Made in the UK for a lower carbon footprint.

• Certified to BES 6001 Responsible Sourcing standard.

• Confidex® Guarantee for up to 40 years for the weatherside of industrial and commercial buildings with no inspection or maintenance to maintain its validity in Zone 1 and Zone 2 areas; when registered within 3 months of the building completion date at www.colorcoat-online.com

• Exceeds requirements of CPI5 as per EN 10169:2010 demonstrating excellent barrier properties when used internally.

• BBA certified for durability in excess of 40 years.

• Fully recyclable with full product traceability and REACH compliance.

Colorcoat Prisma® by Tata SteelColorcoat Prisma® by Tata Steel demonstrates a step change by utilising cutting edge three layer manufacturing technology to create an optimised, robust, chrome free pre-finished steel product.

Key benefits include:

• Revolutionary 3 layer technology, providing enhanced aesthetics and long term performance and durability.

• Contemporary colours including solids, metallics, matts and a range of natural metal shades

• Optimised Galvalloy® metallic coating for ultimate corrosion resistance

• Independently tested for liberation of volatile organic compounds (VOC) against EN ISO 16000-9 and achieved an A+ rating.

• Fully REACH compliant & free of chromates including hexavalent chrome.

• Made in the UK. Certified to BES 6001 Responsible Sourcing Standard.

• Confidex® Guarantee for up to 40 years for the weatherside of industrial and commercial buildings with no inspection or maintenance to maintain its validity in Zone 1 and Zone 2 areas, when registered within 3 months of the building completion date at www.colorcoat-online.com

31

Colorcoat® by Tata Steel servicesConfidex® Guarantee

The Confidex® Guarantee from Tata Steel was first launched in 1992 and since then has remained best in class. Confidex® from Tata Steel offers the most comprehensive guarantee for pre-finished steel products in Europe and is available for industrial and commercial buildings with Colorcoat HPS200 Ultra® and Colorcoat Prisma®. The Confidex® Guarantee is clear and simple and unlike many other guarantees, offers full remedial action in the unlikely event of coating failure.

Repertoire®

The Repertoire® Colour Consultancy can advise on colours and colour strategies using a range of standard shades, as well as discussing individual bespoke colour requirements. With a minimum order quantity of 2500 m2 Tata Steel can match almost any solid colour from physical swatches to commonly used references standards. Available in Zone 1 and Zone 2 areas in Europe with Colorcoat HPS200 Ultra®

and Colorcoat Prisma® and the Confidex® Guarantee. For more information visit: www.colorcoat-online.com/repertoire

Colorcoat® Technical Papers

Tata Steel have published a wide range of technical papers to independently guide and advise you on key issues in building design and construction commonly considered for roof and wall cladding systems using Colorcoat® products. From acoustics and air-tightness to low carbon design, gauge tolerance and fire performance, there is a technical paper that will help you find a solution. Visit www.colorcoat-online.com/technical to download the papers.

For more information about Colorcoat® by Tata Steel products and services visit www.colorcoat-online.com

Colorcoat, Colorcoat Connection, Colorcoat HPS200 Ultra, Colorcoat Prisma,

Confidex, Galvalloy and Repertoire are registered trademarks of Tata Steel UK Limited.

NRG PanelThe NRG option is available across the total Eurobond panel range. It uses a special Colorcoat® High Reflect by Tata Steel internal steel face that maximises daylight and reduces the requirement for artificial lighting.

The result is lower light energy bills for the life of the building, a reduction in the CO2 footprint and a positive contribution to material credits in a BREEAM assessment. The NRG option is available in a wide range of finishes that combine aesthetics, functionality and performance.

The new NRG panel option offers:

• >_85% reflectance, reducing the amount of energy required to achieve the same level of lighting.

• Significantly reduces CO2 emissions helping to achieve compliance with tightening regulations.

• Can improve daylight factor by 10%.

• Possible energy savings of up to 12% per annum*.

* Based on 4000m² building, daytime operation. Based on SBEM Calculation under NCM conditions for Part L compliance. [Payback for 24 hour operation is ≤ 1.5 years] Colorcoat® High Reflect used for wall and ceiling.

eurobond.co.uk

Eurobond Laminates LtdWentloog Corporate ParkCardiff, CF3 2ER

Telephone. +44 (0) 29 20 77 66 77Email. [email protected]

www.eurobond.co.uk In association with our supply chain partner

Documents

The natural choice in architectural composite panel systems...range of composite panel solutions offer the specifier complete assurance in the event of exposure to heat or flames