The making of the GTS43 – April 2011www.sydneyyachts.cominfo@sydneyyachts.com

proudly presentsthe making offactory

Our boats are being built in Nowra not far from Sydney since the early 1980’s

R&D

More than twohundred yachts in the last 10 years

Ker Design from Valencia Spain has been selected because of their outstanding record of winning designs and America’s Cup experience

building the hull plug and mould

The hull shape used for the Sydney GTS43 is the product ofComputational Fluid Dynamic (CFD) research, a significant number ofdesign options were analysed leading to some surprising and highlyexciting conclusions.

building the deck plug and mould

building the GTS43-01

7th of April 2011

The Sydney GTS43 hull No 1 has been laminated and is now complete.

The internal structure is being fitted to the hull as are the interior furniture moulds, we aim to  be releasing the hull from the mould in approx 2 weeks. The deck has had the first laminates applied and the foam core is currently being fitted, we aim to have the deck completed by the end of next week ready for release from the mould. All the internal furniture modules have been constructed and will be fitted to the hull in the next week or so, the interior timber joinery has also commenced. The Hall spar Carbon mast is well underway, we are fine tuning some equipment and this will be ready to ship to Australia by the start of May. As you are aware Hull No 2 was contracted this week, we aim to start this hull in approx 3 weeks time, for a launch date in September. We will keep you updated as the build progresses.

Kind regards,

Team Sydney Yachts

If you have any further questions than please contact: Sydney Yachts Ltd PtyPO Box 513Terrey Hills 2084 NSW Australia

info@sydneyyachts.comwww.sydneyyachts.com