The Lumberman's Exchange brought to you by LBXonline.com

'08 Dynamic 585 chipper

Low hours, Low price!Item ID: 13422Contact: Tom ext. 604

For classifieds call (800) 315-9950 or (615) 349-1890 or

exceLLent conDition!Item ID: 13402Contact: Chris ext. 600

Kmc 1400

www.LBXonLine.com

With your smart phone: Scan QR Code to visit—

í

DealS Monthof the

reDuceD price!Item ID: 13206Contact: Sam ext. 603

'95 JD 693D crawLer Buncher

IntroducIngHFP150

FIrewood Processor

The HFP150 is the latest addition to the Hahn line of firewood processing

attachments for skid steer loaders and compact track and wheel loaders. When attached to a properly equipped loader, the HFP150 compact Firewood Pro can pick up a 6' to 10' log, cut it into firewood blocks, and split those blocks into 2, 4, or 6 pieces. All functions are performed by one person seated in the loader's cab—resulting in greater safety, improved productivity, and making cutting and splitting firewood a whole lot easier.

the HFP150 compact Firewood Pro is:An affordable alternative for the person • looking for a faster, easier, more efficient, and safer method of putting up firewood—but doesn't require the production capacity you get with the larger Hahn HFP160 commercial unit.A smaller, lighter, simpler machine that runs • well on most mid-sized skid loaders in the 45hp to 50hp range—with hydraulic flows of 15 gallons per minute.

HaHn MacHinery inc. P.O. Box 220 • Two Harbors, MN 55616

www.HahnMachinery.com

For more information on the —HFP150 compact Firewood Pro

1-800-483-8825 for complete details on this or any Hahn

firewood processor or forestry equipment call or email [email protected]

New the

Compact

A unique "Shuttle Trough" system carries the log up to the splitting wedge

The high speed chainsaw cuts a firewood block 12" to 20" long

As the splitting cylinder pushes the block through the wedge, the Shuttle trough is

advancing the log for another cut

HgP150 Firewood Processor

Since 1986 - The Original (800) 315-9950 or (615) 349-1890September 2014

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

2 n The Original Lumberman’s Exchange Visit us online at www.LBXonline.com!

For Classifieds Call Your LBX REP at 1-800-315-9950 September 2014 n 3

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!


CLEEREMAN SAwMiLL MAChiNERyYour Most Profitable Sawmill Investment.

Why has CleeremanSold Over 990 Carriages?

The answer is Simple...QUalITY &SerVICe!

All Machines are Cleereman Quality Throughout.You Get the Best Machines Backed by the Top Service

in the Industry – Call Cleereman Today!

CLEEREMAN

[email protected]

PHONE: 715-674-2700FAX: 715-674-7002

5500 PINE ST., NEWALD, WI. 54511

12 ModELSa CarrIage TO FIT YOUr OperaTIOn!

Not just Carriages!• Carriage Drives Hydrostatic & Electric• Bar Type Log Turners 2500 – 3500 lbs.• airBag & HyDrauLiC CaBLe Tensioners• sawyers CaBs & ConTroL CaBs• CusTom maTeriaL HanDLing sysTems

LUMBER PRO

Heavy Duty Double Cut Band MillThat is Sweeping the Industry.• Reduces Manpower• Adds Flexibility from 4/4 – 12/4 Lumber, Beams, Cants, Cross Ties or EVEN as a Resaw!• Lower Initial Installation Cost• Unmatched Accuracy

Patent Pending

www.Cleereman.Com

CLEEREMAN SAwMiLL MAChiNERyYour Most Profitable Sawmill Investment.

Why has CleeremanSold Over 1000 Carriages?

The answer is Simple...QUalITY &SerVICe!

All Machines are Cleereman Quality Throughout.You Get the Best Machines Backed by the Top Service

in the Industry – Call Cleereman Today!

CLEEREMAN

[email protected]

PHONE: 715-674-2700FAX: 715-674-7002

5500 PINE ST., NEWALD, WI. 54511

12 ModELSa CarrIage TO FIT YOUr OperaTIOn!

Not just Carriages!• Carriage Drives Hydrostatic & Electric• Bar Type Log Turners 2500 – 3500 lbs.• airBag & HyDrauLiC CaBLe Tensioners• sawyers CaBs & ConTroL CaBs• CusTom maTeriaL HanDLing sysTems

LUMBER PRO

Heavy Duty Double Cut Band MillThat is Sweeping the Industry.• Reduces Manpower• Adds Flexibility from 4/4 – 12/4 Lumber, Beams, Cants, Cross Ties or EVEN as a Resaw!• Lower Initial Installation Cost• Unmatched Accuracy

Patent Pending

1030


The Original Lumberman’s

exchange

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2014 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

Publisher Woods Publishing

Advertising sAles Morris Woods (615) 349-1890 [email protected]

design director Heninger & Associates [email protected]

equiPment rePs Equipment Representative Tom Hirt (800) 315-9950 x604

Equipment Representative Sam Wall (800) 315-9950 x603

mAiling Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

Ad submissions May be sent to— [email protected]

PostmAster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

ACE ..........................................7, 9AJD Forest Products ................34Amark ........................................21B & B Mfg. .................................16B. H. Payne ................................34Baker .....................................9, 19Bartlett Saw Service ..........17, 33Blockbuster ..............................27Buck Equipment (AIM) ...........23Cleereman ...................................4CME..............................................7Concept Products ....................29Corley Mfg .................................27CRD Metalworks .................13, 21CW Mill (Dynahog) ....................2Foundation Capital ..................22Hahn ........................................1James G. Murphy Auction ......8JMWood Auction Company ....9Kasco-Sharp Tech ....................26Kelly & Company Auction ....11Kilgore Saw ...............................23

** INFO LINK **Lignomat ...................................24LM Equipment, Canada .............3M&F Gauge ................................30Menominee Saw .......................36Metal Detector's, Inc. ...............24Mid-South Forestry Show .....37Midwest Sharpening Service ..26Morbark ....................................11Multitek .....................................12Piper’s Saw Shop ......................10Press Releases .......................38Resource Recovery ..................20Rotochopper ............................40Row Electric..............................14Sawmill Exchange ....................18Select Sawmill, Canada ............31Southeastern Metal, LLC ...........7The Paul Bunyon Show .........39TOM'S GREAT DEALS ...............32Universal Refiner......................35Weaver Electric ........................25Wood-Mizer ...............................15

For ClassiFieds Call 800.315.9950

See pictures, prices, and location of all equipment at

www.lBXonline.com

AIR COMPRESSORS03 C7 FreeFarmer - Refurbished in 04. Does have minor transmission problem. Item ID-13192 - Sam 800.315.9950 x6031996 Prentice Knuckleboom - No hour meter, needs silanoid cut off switch great Deal! - Item ID-13442 - Sam 800.315.9950 x603

BANDMILLS & HEADSAWSS & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2” or 2” band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run - Item ID-13434 - Barbara 800.315.9950 x606

CARRIAGES & DRIVES2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw (2 spare 48" blades and 1 spare 36" blade), short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop and loader to drop logs onto carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Significant new spare parts to be negotiated separately. - Item ID-13198 - Sam 800.315.9950 x603Manual Four Head Block - Mounted on all steel carriage. Husk. Manual Pulleys on

** CaLeNdar **miD-south Forestry eQuipment showcoming septemBer 19–20Starkville, Mississippiwww.midsouthforestry.orgSee page 37 for details

the pauL Bunyan showcoming octoBer 3–5Cambridge, Ohiohttp://www.ohioforest.org/?page=PBSGallerySee page 39 for details

** auctions **James G. murphy — page 8

www.murphyauction.com

WyominG saWmills (Bid live or online)

9 am• Wednesday • september 241515 N Sheridan Ave., Sheridan, Wyoming

JmWood auCtion Company — page 9www.jmwood.com

huGe Forestry auCtionWednesday & thursday • september 10 & 11

Montgomery, Alabama

Kelly & Company sales — page 11www.KellyandCompanySales.com

KorineK Brothers saWmills (Bid live or online)

10 am• saturday • OctOber 1114077 Vine Road, Oswego, Kansas

11 PBS Ad 4.125x10.875.indd 1 6/23/11 8:09 AM

if y

ou

ne

ed

to

ch

an

ge

yo

ur

ad

dre

ss o

r

ad

d y

ou

r n

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Ori

ginal

Lum

berm

an’s

Exc

hang

eP

.O. B

ox 1

916

Col

umbi

a, T

N 3

8402

❑ P

leas

e ad

d ❑

Ple

ase

Chan

ge

❑ P

leas

e Re

mov

e

co

mp

an

y n

am

e*

Indi

vidu

al N

ame

Add

ress

C

ity

Sta

te

Zip

Pho

ne

Fax

E

mai

l

*Com

pany

nam

e an

d ad

dres

s re

quir

ed to

pro

cess

you

r cha

nge.

✁


EquipmEntREpREsEntativEs

Sam WallPhone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

Call uS ToDay for all your uSED

EquIPmEnT nEEDS!

fREE EquipmEnt listings! Call –(800) 315-9950

Chris Woods, ownerPhone: 800-315-9950 Ext. 600

Bearing . Parts Book and where to order included. Item ID-12846 - Tom 800.315.9950 x604

CHIPPERSPrecision 58 Chip Pac - single chute loading system. Item ID-12764 - Sam 800.315.9950 x603

COMPLETE SAWMILLSComplete 3 head block Helle

www.LBXonLine.com

For classifieds call (800) 315-9950 or (615) 349-1890 or

With your smart phone: Scan QR Code to visit—

í

DealS Month-august-

of the

'95 JD 693D crawLer Buncher

'99 Daewoo 220 soLar ii

exceLLent machine!Item ID: 13335Contact: Tom ext. 604

Item ID: 12936Contact: Chris ext. 600

reDuceD price!Item ID: 13206Contact: Sam ext. 603

'98 cat D4h tsK

Sawmill - 100hp electric motor, run by Omen Cummins Generator set, Two stand automatic Log Deck, 3 saw Cedar Creek Vertical Edger, complete cost $12000. Palllet Board resaw system, 2 roto phase Go Fast Deduster 2 head Go Fast Resaw with complete automatic run around system. Omen Cummings Generator New Condition, Green Chain Round Table, Manual Chop saw, rotating board stacker, all under roof. Excellent Condition. Thomas Ind. Computer Set Works Cost $10000. Saw Dust Conveyer, saw dust box, 2- 56 inch inserted Tooth Saws, 2 Roto Phases, 3 Phase 480 Electric Boxes complete cost over $10,000. Will include 20’ of 2 strand kant Green Chain. Item ID-13122 - Tom 800.315.9950 x604Forest-All Mill - circle saw - Item ID-12762 - Sam 800.315.9950 x603

CONVEYORS Mellott 3-Strand Lumber Conveyors Decks (Log - (2) Mellott log decks, 3 strand, (1)22’ 6” long, 51 3/4” high (1)27’ long, 74” high $7500 ea. Item ID-13200 - Sam 800.315.9950 x603Hill Top 4-Strand Lumber Conveyors Decks (Log - Hill Top lumber transfer deck, 37’ long, 4 strand roof top chain, New gearbox drive - Item ID-13199 - Sam 800.315.9950 x603

DEBARKERSMorbark C-16 Debarkers - 75 HP Motor, 24’ Outfeed Hourglass Rolls - Item ID-13193 - Sam 800.315.9950 x603

DYNAMIC CHIPPERS2007 Dynamic 565 Chipper - Very nice and good working chipper. 1350 hours. S/N


Top Quality by Wood-Mizer

Woodmizer Silver Tip13’2” x 1” x 035

Woodmizer Silver Tip15’4” x 1.5” x 055

Woodmizer Silver Tip20’4” x 2” x 055

NATIONWIDE SHIPPING

678-207-8550www.semetals.net

PRICES too low to PRInt!Call TODaY To HEAR THESE SPECIAL LUMBERMEN’S ExCHANgE PRICES

reform Knife grinder

Model AR15/51•

60” Magnetic Chuck•

(800) [email protected]

exceptional Prices • excellent Service

‘98 Peterbilt 378N-14, cummins, 18-spd, •engine brake, air ride suspension, aluminum wheels, tandem axle, full locker, full gauge panel, loaded 7000 Serco log loader ...asking $55,000

Contact Steve(563) 580-0383 WI

new PrIce!

5032. Cummins 360HP engine. Auto-Feed system with remote control. Pintle hook for towing. Great machine for producing biomass from limbs and tops, but can take up to 20” trees. Item ID-13437 - Tom 800.315.9950 x604

EDGERS & GANGS2005 Morgan Board Edger - Has 3 saws 2 movable,a variable infeed belt with air hold down 4” maximum thickness no power unit - Item ID-13427 - Barbara 800.315.9950 x606Cornell 636 edger - with dual tailers, 5 hp hydraulic pack for set works. Good condition - Item ID-13239 - Chris 800.315.9950 x600

FIREWOOD PROCESSORS‘08 Cord King - Model #44 w a 4cyl 66hp cummins, refurbished and completely gone thru by Cord King in ‘08

Machine it has a 24’ outfeed conveyor. Machine is in Excellent condition! - Item ID-13167 - Chris 800.315.9950 x600Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800.315.9950 x604Custom Firewood Processor - Easily cuts 3+ chord an hour. Fold in deck, conveyer on wheels, 24” capacity!! Very clean running machine. Item ID-13108 - Sam 800.315.9950 x603Homemade Firewood Processor - w a JD 4276 Diesel engine. It has 300 gallon

hydraulic tank w a triple stack pump on engine. All new hydraulics about 7 years ago. It will do about 2 cords an hour. With a 45’ concave belt stacking conveyor. Unit has a 4-way wedge. Comes w a 25’ vibrating conveyor, and a small saw dust conveyor. Item ID-13404 - Chris 800.315.9950 x600

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus


PUBLIC AUCTIONNO MINIMUMS - NO RESERVES

James G. Murphy Co.Commercial & Industrial Auctioneers

1.800.426.3008 - 425.486.1246 - murphyauction.com

9AM - WEDNESDAY - SEPTEMBER 24Preview 8-4pm, Tuesday, September 23

1515 N Sheridan Ave, Sheridan, WY 82801

Bid live or bid online with MurphyLIVE!

Closing MIll

Sawmill Equipment, Rolling Stock

Prentice Log LoadersSoderhamn Ring DebarkerAlbany Rosserhead DebarkerStrom, L&M Whole Log Cutoff SawsPackage SawSwing SawKlamath Head Rig BandmillSalem CarriageInovec SetworksTyrone Berry DriveKockums Quad BandmillKockums, McDonough Band Resaws

(2) Ukiah EdgersJeffrey HogAcrowood ChipperChip BinsBaghouseSoderhamn Chip ScreenChip Loading SystemRader Blower, FeederI-R CompressorStetson Ross PlanerIrvington TrimmerSignode Bander

Filing/Grinding Room EquipmentVibratory ConveyorLog Decks & HaulsTransfers & ConveyorsMachine Shop Equipment, ToolsMill ElectricsPeterbilt Dump TruckKenworth Chip TruckFord Water TruckNissan 15,500 lb ForkliftOshKosh Snow BlowerPickups & Flatbeds

WYOMING SAWMILLS


Huge Forestry – Auction –Montgomery, Alabama, usA

‘98 Peterbilt 357C12 engine, 18-speed •transmission, Full lockers, 7000 Cerco Loader ......... ............asking $55,000

Contact Steve(563) 580-0383 WI

one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. Item ID-12386 - Sam 800.315.9950 x603

LOGGING EquIPMENT1969 Timberjack 225D skidder - ring chains front ice chains rear, very good condition!! - Item ID-13215 - Sam 800.315.9950 x603‘02 840 Timberjack - Shear w/ 22” Sawhead, 6cyl John Deere motor that was replaced on 2012. It also has a new radiator. Good A/C & Heat. no oil Leaks. Item ID-13325 - Chris 800.315.9950 x600‘03 Freightliner FL120 - M14 Cummins 13sp Tran, air ride

suspension, cold air. Very Good Truck! - Item ID-13326 - Chris 800.315.9950 x6001976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well.

Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton trailer. Item ID-12249 - Tom 800.315.9950 x6041977 (est) FMC 220CA Tracked Skidder - Good running unit. Detroit 6V53 cranks and runs well. Military style tracks

at 70%. Fixed ESCO Grapple and working Winch. Front Blade. Item ID-13226 - Tom 800.315.9950 x6041977 (est) FMC 220CA Tracked Skidder w/Swing Boom Grapple - 1977 (est) FMC 220CA Tracked Skidder w/ESCO Swing Boom Grapple.


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

LimitedTimeOnly$14.71 each

‘88 450B Timberjack Item ID: 13327Contact: Chris800.315.9950 Ext. 600www.lBXonline.com

Good running condition. Front blade. Detroit 6V53 engine. No winch....they cannot fit with swing boom grapple. Military style tracks at 70%. Item ID-13227 - Tom 800.315.9950 x6041978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. Item ID-12325 - Tom 800.315.9950 x6041978 FMC Model 210 Track Skidder - Estimated 1978

Model 210 FMC Tracked Skidder. Engine and transmission have very few hours since they were reconditioned. Owner reports that about half the tracks need to be re-pinned and bushed, and sprockets and torsion bar need to be replaced. Item ID-13126 - Tom 800.315.9950 x6041979 Case 1150 Dozer - Older Case 1150B Dozer, OROPS Cab; 6-way Angle blade, Hyster winch; Limb risers; Serviceable Undercarriage.

FOB: West Texas - Item ID-13112 - Tom 800.315.9950 x6041979 Cat D5B w/Hyster Winch - 1979 Cat D5B s/n 22x380, direct drive, EROPS, S-Dozer w/ tilt. Needs new rails and sprockets. Enclosed cab. Has A/C but not working. Hyster Winch may need some work. Tractor itself runs good and pushes well. Owner retired. Item ID-13364 - Tom 800.315.9950 x6041979 Timberjack 230 Forwarder - Good running forwarder with 80% rubber.

Serial Number: 792888. Open cab. Detroit engine. Simple but hard working machine. Very clean for its’ age. Hard to find. Item ID-13057 - Tom 800.315.9950 x6041981 Cat D7G w/Rippers - Only 6500 hours on this limited used machine. Owner reports that it has new alternator and has been gone through completely. No leaks. Can pull the twin rippers through ANYTHING! Real powerful machine without all the electronic gizmos of new units. Item ID-13222 - Tom 800.315.9950 x6041981 Hydro Ax 411B w/Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very nice machine for the price. Item ID-12538 - Tom 800.315.9950 x6041984 Cat 518 Skidder with Esco 212 Swing Boom Grapple. Rebuilt transmission. Does not use oil and starts well. Esco 212 Swing Grapple. Tires 23.1 x 26 at 50%. Winch. Hour meter not working. Item ID-13285 - Tom 800.315.9950 x6041985 Barko 350 Loader on


Korinek Brother’s SawmillIt’s Another

Saturday October 11th, 10am

SAWMILL EQUIPMENT: Meadows #2 Manual Sawmill w/ 54” Headsaw, Live Deck - Mellott 2 Strand, Log Turner - Mellott #5, (2) Detroit 671 Diesel Engine, (2) Blowers - 25 KS Phelps, Slab Cart Homemade, Scissor Lift Table - Henderson Chief 2 Ton, Craftsman 12” Radial Arm Saw “Motor Like New”, New Chainsaw Chain, Gang Saw - Cor-nell MR348 Twin Arbor - Has Guard Pallet Notcher - Kenwell Jackson 2 Head PTO Driven, Jockey - Big Circle Blade Saw Sharpener, Lots of Small Equipment PALLET MANUFACTURING EQUIPMENT: Pallet Chief w/ (5)Magnum 70 (2) New and (1)Magnum 80 nail gun, Pallet Stacker - 20 High, Roller Conveyors, (2) Heavy Metal Pallet Building Tables, Coil Nail, Stock Straight Nails, Central 2.5 Ton Pallet Jack - New, Metal Banding Machine (2) New Rolls of Metal Band, SHOP EQUIPMENT: Lincoln Mig Welder & Bottle Like New, Lincoln 220 Arc Welder, Plasma Cutter, Victor Torch Set - No Bottles, Metal Cutting Band Saw, Craftsman Metal Lathe, Wood Band Saw, Craftsman Table Saw, Large Drill Press, Bench Grinder, Air Compressor, Portable Air Tank, Bead Seater, Generator, Sand Blaster, Miter Saw Tools - Electric & Air, Lots of Hand Tools & Other Related Shop Equipment, Assorted Screws, Nuts, Bolts, WHEEL LOADER: International Hough Front End Loader, H Series C, Spare 20.5 - 25 NHS Tire & Wheel, TRUCK: 78 Ford 1 Ton 4 Spd 10ft Metal Bed w/ Hoist LUMBER: 1” x 6” x 8’ - Oak, Red, Walnut, Several Stacks of Assorted Lumber, Hedge Posts MISCELLANEOUS: Chainsaws, Bars, Chains, Chainsaw Sharpener, Husqvarna Tiller Rear Tine,Belts,100’s of Saw Blades, (2) 4’ Saw Blades Carbide, Squirrel Cage Fans, Wheel Barrows, 300 Gallon Fuel Tank, 500 Gallon Fuel Tank No Pump, Oil & Fuel Pumps, Several Pipe & Scrap Piles, Boat Motors, Trolling Motors, Fishing Tackle, Reloader & Reloading Equipment, Rods & Reels, Much More!

TERMS: --5% BUYERS PREMIUM-- CASH,CHECK OR WIRE TRANSFER - 2 CONVIENENT WAYS TO BID: (1) Bid in Person – Be on site day of sale. (2) Bid by Phone – You must register prior to auction by faxing a copy of your check or bank letter. You may bid by phone on day of auction. TO BID, CALL: 620-404-0050 or 620-404-9296 or 417-300-9904.

Sale Conducted By:

www.KellyandCompanySales.com(620)362-3388

For Pictures and Descriptions Please View Online at www.KellyandCompanySales.com

Looking to Have an Auction? Call Kelly and Company Sales Today!

14077 Vine Rd Oswego, KS 67356. From 160 & 59 Jcts in Oswego, go 2.8 miles West on 160/59 to Victory Rd then turn immediately right/East on 14,000 Rd, go 1/2 mile to Vine Rd, turn left/North on Vine go 1/2 mile to sale site on right/East side.- Lunch & Restroom Available -

This is a total closeout of a working sawmill, lots of items, too numerous to mention, many items still being discovered! Plan to attend a once in a lifetime sale of a family saw mill.

LOCATION:

Auctioneers Note:

-Auction

Pallet Chief IH Hough Front End Loader, H Series C Meadows #2 Manual Sawmill

Bevel Buddy is available at all Authorized Morbark Dealer locations. To find a dealer in your area, go

to www.morbark.com/find-a-dealer

• Reduce knife changes and resharpening costs

• Less downtime = more production time = BIGGER PROFITS

• Extended life for chipper parts such as bolts, knife holders and clamps

• Use less fuel with sharper knives

Bevel Buddy™ makes chipping more profitable

bevel-buddy-ad_6-5x9-625_uneven-bleed.indd 1 5/22/2014 2:55:05 PM

‘79 Timberjack 230 forwarderCheap and Runs Good!Item ID: 13057Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

‘08 JD 2554 loader w/WaratahItem ID: 13235Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

Pierce carrier - Very clean and very strong Barko 350 Log Loader. 33’ Live Heel Boom. Mounted on Pierce self propelled carrier. Detroit 4-71 engine. Very straight machine. Pilot controls; resealed swing motor; installed block and gear on new orbit motor; new heater motor and fan; new rotation motor for grapples; fresh hydraulic oil in system; new swivel; new heater hoses; new lights; some new wiring; new volt gauge and switch; filters; new starter motor for lower end - Item ID-13445 - Tom 800.315.9950 x6041987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well

Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Sam 800.315.9950 x6031988 Cat D5 TSK w/Grapple - dozer with fixed grapple. No Winch. Runs great and undercarriage in good condition (about 60%). 1100 hours on Undercarriage. Has 3000 hours on rebuilt engine. Has OROPS. FOB Utah. Excellent machine for steep slope logging. Item ID-13298 - Tom 800.315.9950 x6041989 JD 540-D Cable Skidder - Original owner; Hour meter shows 5800 hours. Serial number: 554925. 23.1X26: Tires; 20% Remaining tread. New(not rebuilt) John Deere engine w/900 hours. No smoke or noise. Runs strong. On one of the coldest days of

the year, the tractor started with only 1 turn of the switch Sheet metal is very good. Pins and bushings average to good condition. Good dozer blade with good pins and bushings. Item ID-13146 - Tom 800.315.9950 x6041989 JOHN DEERE 648D - 30.5 tires around 40%. We have another 648 D for parts that will go with it. Machine runs,

but needs a little TLC. Item ID-13220 - Sam 800.315.9950 x6031989 Timberjack 380 Grapple Skidder - Serial# 385267. Almost new grapple. Engine has been replaced. Transmission just rebuilt. 28L tires. Center pins and bushings show medium wear. Good for a year moving 2-3 loads per day. Item ID-13143 - Tom 800.315.9950 x604


P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438www.multitekinc.com • [email protected]

Multitek Firewood Processorsincrease your productivity and profitability

• Quality Equipment to Reduce your Labor Costs• Circular Saw or Bar & Chain Models• 7 Models to Choose From• Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

2008 CordKing model 44Item ID: 13167Contact: Chris800.315.9950 Ext. 600www.lBXonline.com

‘10 JD 703J HarvesterItem ID: 13419Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘05 Kenworth T-800 w/rotobec mT27 loaderItem ID: 12612Contact: SamPh: 800-315-9950 x603

www.lBXonline.com

1990 VME CLARK F667 GRAPPLE SKIDDER - 500 GALLON WATER TANK - SERIAL # 560HC01017, 500 HOURS ON REBUILT CUMMINS ENGINE. Approx 11,000 on machine. Light package. 30.5 tires at 30% with chains. Runs well. Huge water tank could help in fire fighting applications. Item ID-13224 - Tom 800.315.9950 x604

1991 John Deere 640D Skidder - 23.1 x 26 Tires 50%, Rebuilt Trans.,Good Tight Machine - Item ID-13191 - Sam 800.315.9950 x6031993 Bell Ultra T Tracked FB - Hard to find Bell Tracked feller buncher with dangle head. Just 3400 hours on this well maintained machine. 16” pads and a 60% undercarriage. NO A/C. NO Heat. Joystick Controls. Deutz Engine. Runs

every day. Item ID-13286 - Tom 800.315.9950 x6041993 Timberjack 1010 Forwarder - 16,000 hours. Good running condition. 6 wheeled. Tracks for rear bogies and chains for front tires. Item ID-13446 - Tom 800.315.9950 x6041993 Timberjack 380B PG Highlift Tree Trimmer, s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade,

4X4, Firestone 67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL - Item ID-13090 - Tom 800.315.9950 x6041994 (est) CTR Model 42 Slasher - Rarely used. Not sure of year model. Priced to sell. Excellent condition according to owner. Item ID-13341 - Tom 800.315.9950 x6041994 Barko 160B - electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.) - Item ID-13238 - Chris 800.315.9950 x6001994 Barko 275B Stationary Loader - Includes Mounting platform and 75HP electric motor. Very few hours as this machine was taken down shortly after purchase and was never used again. Has been sitting in excess


There's Only One Way to Make Money in the Firewood Business…ProductIon!our VIsIon For Your success Is 20/20

The Results are in from the Great Firewood Shootout…Our Rapido Loco 20 and Woodbine pRo 20

dominated the competition!

WoodBine rapido loCo 20Features:

50" Simonds Circular Slasher Blade•73 HP Deutz Diesel•Tandem Axle DOT Approved Trailer•24' Conveyor • StandaRd13' Powered Infeed • StandaRd8-way Splitting Wedge•20" Log Diameter Capacity•Push-button Splitting System•

Woodbine Rapido Loco 20 Features- 50” Simonds Circular Slasher Blade- 73 HP Deutz Diesel- Tandem Axle DOT Approved Trailer- 24’ Conveyor STANDARD- 13’ Powered Infeed STANDARD- 8 Way Splitting Wedge- 20” Log Diameter Capacity- Push-Button Splitting System

Woodbine Pro 20 Features- Oregon .404 Harvester components- Tandem Axle DOT Approved Trailer- UpgRADeD 60 HP Deutz Diesel for more power!- 24’ Conveyor STANDARD- 13’ Powered Infeed STANDARD- 8 Way Splitting Wedge- 20” Log Diameter Capacity- Push-Button Splitting System- Our Most Popular Chain Saw Machine

There’s Only One Way to Make Money in theFirewood Business…. Production!Our VisiOn FOr YOur success is 20/20The results Are in From the Great Firewood shootout...Our rapido Loco 20 and Woodbine Pro 20 DOMinATeD The cOMPeTiTiOn!

Call 888-667-8580www.crdmetalworks.com

Family Owned – Family Operated – Factory Direct

*As Seen In Sawmill & Woodlot Magazine

At $54,900Ready To Produce, this is the Fastest

Production Firewood Processor in North

America.*

At $44,900 theWoodbind Pro 20 leads

its class in PRICE, PRODUCTIVITY and

PROFITABILITY*

check them out at the

remember HindsigHt is 20/20sO BeFOre YOu BuY cOMPAre eiTher OF The

20 series PrOcessOrs FrOM crD MeTALWOrks TOAnY BrAnD - AnY siZe - AnYWhere.

Made

in the USA

at $54,900 Ready to Produce, this is

the Fastest production Firewood processor in

North America.*

Woodbine Rapido Loco 20 Features- 50” Simonds Circular Slasher Blade- 73 HP Deutz Diesel- Tandem Axle DOT Approved Trailer- 24’ Conveyor STANDARD- 13’ Powered Infeed STANDARD- 8 Way Splitting Wedge- 20” Log Diameter Capacity- Push-Button Splitting System

Woodbine Pro 20 Features- Oregon .404 Harvester components- Tandem Axle DOT Approved Trailer- UpgRADeD 60 HP Deutz Diesel for more power!- 24’ Conveyor STANDARD- 13’ Powered Infeed STANDARD- 8 Way Splitting Wedge- 20” Log Diameter Capacity- Push-Button Splitting System- Our Most Popular Chain Saw Machine

There’s Only One Way to Make Money in theFirewood Business…. Production!Our VisiOn FOr YOur success is 20/20The results Are in From the Great Firewood shootout...Our rapido Loco 20 and Woodbine Pro 20 DOMinATeD The cOMPeTiTiOn!

Call 888-667-8580www.crdmetalworks.com

Family Owned – Family Operated – Factory Direct

*As Seen In Sawmill & Woodlot Magazine

At $54,900Ready To Produce, this is the Fastest

Production Firewood Processor in North

America.*

At $44,900 theWoodbind Pro 20 leads

its class in PRICE, PRODUCTIVITY and

PROFITABILITY*

check them out at the

remember HindsigHt is 20/20sO BeFOre YOu BuY cOMPAre eiTher OF The

20 series PrOcessOrs FrOM crD MeTALWOrks TOAnY BrAnD - AnY siZe - AnYWhere.

Made

in the USA

WoodBine pro 20Features:

Oregon .404 Harvester Components•Tandem Axle DOT Approved Trailer•

• UpgRaded 60 HP Deutz Diesel for More Power!24' Conveyor • StandaRd13' Powered Infeed • StandaRd8-Way Splitting Wedge•20" Log Diameter Capacity•Push-button Splitting System•Our Most Popular Chain Saw Machine•

at $44,900 the Woodbine Pro 20

leads its class in price, productivity and

profitability*

rememBer: hindsiGht is 20/20

So beFOre yOu buy, cOmpare either of the20 SeRieS PRoceSSoRS fRom cRD metAlWoRkS

tO any brand, any size, anyWhere

Family Owned—Family Operated—Factory Direct

*as seen in Sawmill & Woodlot

magazine.


ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED: • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters • Synchronous Motors • Engine-Generator Sets • Safety Switches • DC Motors • Transformers, Single Phase • Phase Convertors

Fax to: 800-248-4479 419-244-8887 419-248-4479

WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL

P.O. Box 2812 • Toledo, Ohio 43606

[email protected]

reDuceD

‘01 Timbco 820D forwarderItem ID: 13217Contact: Chris Woods800.315.9950 Ext. 600

www.LBXonline.com

‘07 Valmet 911X3m Harvester Climbs Anywhere!Item ID: 12571Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

‘04 Bandit Beast model 4680Good machine; low price!Item ID: 13421Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

1999 CaT 525B Grapple SkidderItem ID: 12618Contact: Sam800.315.9950 x603

www.LBXonline.com

material yard. Has 30’ reach. Continuous rotation grapple. Cab with AC. Original price was $140,000 - Item ID-12969 - Tom 800.315.9950 x6041994 Cat D4H TSK Dozer w/Winch + Fairlead - 1994 Cat D4H TSK Dozer with winch and Fairlead. 13,000 hours. 4 new idlers. U/C at 60%. Running every day. Item ID-13424 - Tom 800.315.9950 x6041994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit

running today. Wants to trade for newer 640 Cable unit. Won’t sell unless he has newer skidder to bring in. Item ID-12500 - Tom 800.315.9950 x6041994 JD 648E Grapple Skidder - Good running 1994 JD 648E. Single Arch Grapple. Winch. 28L x 26 tires: One new, One at 80%, Two at 505. John Deere engine rebuilt 800 hours ago. Starts every time! Pins tight. Working today. New Hydraulic Pump. New Manifold. 12,000 hours. Item ID-13103 - Tom 800.315.9950 x6041994 Prentice 180D Log Loader - 11,793 hours, Machine is in good condition, it has been sand blasted and painted, low pro tires 17.5 - Item ID-12759 - Sam 800.315.9950 x603

1994 Prentice 410D Loader on Truck - Good running Loader on sturdy truck. JD 6068 Engine. Joystick controls. Continuous grapple. Item ID-13447 - Tom 800.315.9950 x6041995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID-13185 - Sam 800.315.9950 x6031995 Entyre Low Boy Trailer - 9’ 10” wide. Decent condition. Priced to sell - Item ID-12946 - Tom 800.315.9950 x6041995 Great Dane Flat Bed Trailer - 96x48ft. Will need floor. Tires are fair. Lights and brakes work. Priced

to sell. Item ID-12892 - Tom 800.315.9950 x6041995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. New water pump. Runs well. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood. Priced to sell! - Item ID-12206 - Tom 800.315.9950 x6041995 John Deere 1210 Forwarder - Good running 12 ton forwarder. 8 Wheels. Tracks for one set of bogies. 15,200 hours. Many recent updates: Perkins engine with new injector pump and new turbo; New hydraulic pump; New Rear End; Replaced Rear


DISCOVER HOW WOOD-MIZER’S INDUSTRIAL LINE OF EQUIPMENT CAN MAKE YOU MONEY.

ANY WAY YOU CUT IT,

IT’S GOT TO BE WOOD-MIZER

800.553.0182WoodmizerIndustrial.com

© Copyright 2013 Wood-Mizer LLC

© 2014 Wood-Mizer LLC

800.553.0182 | fastsawing.com

Wood-Mizer’s innovative approach to the design and capabilities of our industrial line give you an edge in this competitive lumber industry. Just ask Wood-Mizer’s customers who count on our thin-kerf technology and innovative equipment to produce profi ts while reducing costs and expanding their markets.

Call today for a FREE catalog and a set of 7 customer success stories or read them online at woodmizerindustrial.com/success

Mike Junk and Shawn Fowler, Owners of Honey Grove Hardwoods “The WM4000 put us right

back up to the competitive edge on utilizing and maximizing yields for our business.”

RESAWS EDGERSSMALL LOG

PROCESSINGHEADRIGS

AWMV 45768 LumbermansExchange September2014 AnyWayPromo.indd 1 8/12/14 12:08 PM


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with wooD-paKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320E-mail: [email protected] • Web: http://home.sprynet.com/~bbmfg/

Shrink Wrap FireWOOD/WaSteWOOD

FinancingAvailable

‘96 Woodmizer lT-40 HD Portable Sawmill Item ID: 13372Contact: Chris Ph: 800-315-9950 x600www.LBXonline.com

1996 CaT 214 ExcavatorItem ID: 13441Contact: Sam800.315.9950 x603

www.LBXonline.com

‘96 PrEnTICE KnuCKlEBoomItem ID: 13442Contact: Sam800.315.9950 Ext. 603

www.LBXonline.com

Bogie Bearings; New Lexan on front/rear of cab; New Joysticks; New Indexator 12 rotator on Super Grip 36” Grapple; New boom hydraulic lines. Tires at 30%. new loader control boxes - Item ID-13435 - Tom 800.315.9950 x6041995 JOHN DEERE 693D CRAWLER BUNCHER - Multi Purpose feller buncher, 1995 John Deere 693D Crawler

Multi purpose feller buncher c/w circular saw head and shear head, first time offered on the market, only 6000 hrs. two heads, MUST SELL. Ideal for clearing development land. READY FOR LOGGING. Watch the video: https://www.youtube.com/watch?v=H1EuULjnWN8&feature=youtu.be - Item ID-13206 - Sam 800.315.9950 x6031995 Morbark Wolverine 3-Wheeled Feller Buncher -

S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. Item ID-12531 - Tom 800.315.9950 x6041996 Cat 214 Mobile Excavator - with 36’ magnet 3 tons steel shear. low hrs! All hard tires, 4 outriggers ideal for scrap business. It also has 48’ swavel bucket for street ditch

clean up. Item ID-13441 - Sam 800.315.9950 x6031996 JD 850C w/Winch - VERY GOOD condition. Hours estimated at 5500. Owner just spent $25K on a complete engine rebuild, Hyd. pump, and other updates. The instrument cluster/hour meter was just replaced so it reads very few hours. The track chain and sprockets were replaced in the last 3-400 hours. Several bottom rollers replaced and a new cutting edge and end bits were installed. Winch is COMPLETELY rebuilt. The 850C has a 10’ 8” Semi U blade with Hyd. tilt. This is a strong running machine! - Item ID-13423 - Tom 800.315.9950 x6041996 Prentice Knuckleboom - No hour meter , needs silanoid cut off switch great Deal! - Item ID-13442 - Sam 800.315.9950 x6031996 Timbco 425B w/Fabtek Head - Good running machine with 9650 hours. Cummins 6BT5.9 engine. 24” pads. U/C at 50% or better. AC/Heat/Stereo all work. Fabtek Model 2000RP 4-Roller processor head. Item ID-12830 - Tom 800.315.9950 x6041996 Timberjack 230 Forwarder - 15,000 hours. Good running condition. Working today. Serco Loader. Dry and still runs strong. Item ID-12943 - Tom 800.315.9950 x6041996 Valmet 603 3-Wheeled Buncher - Good running condition. Hours estimated at 8500. Meter does not work. 28L x 26 tires at 90%. Koehring 18” Hot Saw. Cummins 4BTA3.9 engine. AC and Heat work. Includes water tank and hose in cab. Ready to work. Great for thinning. Includes about $2000 in spare bushings


Bartlett's saw service and supply800-566-0319

621 US 41AHenderson, KY 42420

e-mail: [email protected]

au t

Bartlett’s Saw – For All your Carbide & Wide Band Saw Supplies, Service & Sales

EuroBit – The Finest Carbide Saw Bit

Available

Wide Band Saws In All Widths, Kerf, Length – Single & Double Cut

Introducing

3 Fits Most Popular Brands3 Quickly Replaceable on Site3 No More Shipping it to the saw shop3 Can Be Sharpened on the Saw

LOGGING SLASHER SAWSLOG MERCHANDISING SYS.FIREWOOD PROCESSORS

If You’re OperationUtilizes Slasher/Cut-Off

Saws in the Woods or at the Mill, Call Bartlett Today!

THE BARTLETT B-ITCO BARTLETTINSERTED TOOTH CUT OFF

Specifically Designed To Save You TIME & MONEY!

Bartlett’s Also Offers The Jones Saw Grinder for On-Site Sharpening!

Timberjack 240D Cable SkidderItem ID: 13433Contact: SamPh: 800-315-9950 x603

www.LBXonline.com

WanTED: Bell ultra C feller BunchersWe have buyers looking for both track and rubber tired!Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

for machine. Item ID-13155 - Tom 800.315.9950 x6041997 CATERPILLAR 527GR, Tracked Grapple Skidder. Just under 16,000 hours. ESCO Fixed Boom Grapple & Winch Drum (no cable attached), 6 Way Blade, ROPS with Wire Cage Cab. Very good interior. Undercarriage at 70%, Tracks at 90%, Well maintained and ready to work. Item ID-12901 - Tom 800.315.9950 x6041997 Kobelco SK 200 Log Loader - high and wide tracks, Jewell boom and grapple with 11,940 hours. Forestry guard package. Cab riser for great visibility that tilts for transport. It has a 19’ boom and a 12’ stick and 4’ live heel for 33’ reach. The

grapple is 51” max open. Serial #YQU3172. Cummins 6B5.9. 27” triple grousers for working on a yard. U/C at 60%. Item ID-13229 - Tom 800.315.9950 x6041997 Linkbelt 3400 Stroke Delimber - has rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage. 5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber. Item ID-12992 - Tom 800.315.9950 x6041997 Morbark Model 2400 Chipper - Has a Cumins diesel

engine and runs great. All fluids and filters have been changed. Item ID-13429 - Barbara 800.315.9950 x6061997 Timbco TF815 Forwarder - S/N F42,, approx. 16000 hours, Cummins 5.9L 200 hp engine 4 tracks on 710/55x26.5 tires, Reman Rexroth tram pump 1/11, New drop box 2009, new tram motor 2009. The hydraulic system computer controller has been updated to TimberPro’s “TOC2” system. It is based on the newer IQAN control

system. Item ID-13232 - Tom 800.315.9950 x6041997 Timbco TF815C Forwarder - 5400 hours since new engine installed and rebuilt pumps. Everything works strong. Heat, air, OK. Needs oscillating center bearing. Tires 2 new 750/55/26.5 all others are 60% some gouges. Turntable is tight. Newer Rotobec grapple. Pins and bushings are all good. Overall very reliable machine. Item ID-13274 - Tom 800.315.9950 x604


Sawmill ExchangEnorth america's largest Source

of Used Portable Sawmills.

over 800 ads:Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing,

Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains,

Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your EquipmentCall Us for a Free List of Over 800 Ads

or to Sell Your Equipment.

800-459-2148 www.sawmillexchange.com

P.O. Box 710930 • Houston, TX 77271

US & Canada( )

(2) ‘97 Timbco Tf815 forwarderItem ID: 13232Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

‘93 Bell ultra T Tracked fBItem ID: 13286Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘11 morbark 5500 flail DelimberLow price! Priced to sell!Item ID: 13322Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘07 Tigercat 250B w/Waratah 622Item ID: 13360Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

1998 711EX Saw Head Feller Buncher - 30.5-32 tires at 50%; Cummins Engine; 8450 hours; Quadco 22” Large tree saw head. Item ID-13353 - Tom 800.315.9950 x6041998 Cat D4H TSK - Ether start; Lights; 24” Quad link tracks; Floor heater; Winch with 4 roller fairlead; 5651 HRS; We have all service records anything done to it and every service done to it (oil changes) We also have doors and screens that are not on it now. ONE OWNER! Runs great! Winch is CARCO model 50 BPS - serial # 9805109. Like new, has only been used twice! - Item ID-13335 - Tom 800.315.9950 x6041998 Hydro Ax 611EX Saw Head Feller Buncher - with about 8800 hours. Bunching Saw Head has large pocket for accumulation and lifting

side shield for notching larger trees before felling. Cummins engine. 28L tires at 60%. Decent running condition. Item ID-13245 - Tom 800.315.9950 x6041998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. Item ID-12524 - Tom 800.315.9950 x6041998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest

degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. Item ID-12525 - Tom 800.315.9950 x6041998 Valmet 603 Feller Buncher w/Saw - Very nice three wheeled unit with the Koehring 18” hot saw. Cummins 4 cylinder engine. Air and Heat work well. New rear tire. 28L front tires at 50% and include chains. 8400 hours but only 1500 on rebuilt engine. Item ID-13367 - Tom 800.315.9950 x6041999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID-13294 - Tom 800.315.9950 x6041999 Cat 525B Grapple Skidder

- heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. Item ID-12618 - Sam 800.315.9950 x6031999 Deawoo 220 solar LL - 11000 hours, it has heat and air! Its a Daewoo inline 6 Engine 145 hp. The Computer works for the stroker. Tracks are around 11’. Stroke delimber is a Pro mark 50. It’s designed under the timberline, and has a timberline head on it. We have all the maitenance records and extra parts! Great running machine! - Item ID-12936 - Chris 800.315.9950 x6001999 John Deere 450H Dozer - 1999 JD 450H Dozer. 5373 Hours; 6 way blade; Good condition; Open ROPS; U/C at 60%; No winch. Good value for


‘96 JD 850Cw/ WinchItem ID: 13423Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

PlanerItem ID: 13443Contact: Sam800.315.9950 x603

www.lBXonline.com

newman Shavings mill Item ID: 13377Contact: SamPh: 800-315-9950 x603location: Pennsylvania

www.LBXonline.com

small dozer! - Item ID-13354 - Tom 800.315.9950 x6041999 Morbark 1400 Tub Grinder - Loader w/Cab; 4200 hours; Very good condition. Located in PA - Item ID-13361 - Tom 800.315.9950 x6041999 TIGERCAT 860D WITH A 3500 DEHNARCO STROKE DELIMBER. Machine was purchased new in 2001 and has appr. 13,500 hrs. A new JD reman engine was installed less than 300 hrs. ago, machine also has CONTROL PLUS 2 measuring system and top saw and butt saw. Machine is currently on job working. Item ID-13189 - Sam 800.315.9950 x6031999 Timbco 425/Valmet 500 Harvester - Branded a Valmet 500T Harvester, this is in fact a Timbco 425 Leveling Tracked Harvester that came with a Valmet processing head. Comes with

fire suppression system; 5.9 Cummins engine with 190HP; Burns about 4.5-5 gallons an hour. The U/C has less than a 1000 hours on it. Equipped with a Cranab 1400 squirt boom. The owner had added a Lox Max 4000 harvesting head but has sold that so now the machine is being sold without an attachment, but is set up to take a processing head. Machine hour meter not working but is estimated at 13,000 hours. New oil cooler 100 hours ago. Item ID-13140 - Tom 800.315.9950 x6041999 Timbco 425D Harvester w/Keto 800 Processing Head.

S/N 1598; Approx 14000 hours; Squirt stick and long harvester boom (36’ reach), 28” double grouser pads. Cummins 8.3L 260 hp engine (New Reman 11/10 ). New rails and rollers 9/11. Reman Rexroth tram pumps 1/12. Non continuous rotation on upper. Keto 800 processor head, Approx. 2002 model. S/N C3T020 ( 2002?), new tracks, top knives 11/11, 40” 11H bar, 33” cut, no top saw, Hakmet

computer, CanBus computer system with 4 wires. Item ID-13150 - Tom 800.315.9950 x6041999 Timbco TF-820D Forwarder - 11k hrs on machine, new Cummins engine at around 8k hrs and has fresh drive pump & imp. pump. 28L 26 tires some great, some decent. Machine is ready to work, but could use a little fixing here and there. the bucket is sloppy could stand


Beaver Model 18

Coming Soon4 New Models

Safety�

Durable�

Reliable� Convenience�

The Firewood Factory�™�

™�

Reliable�™�

Nothing Eats Wood Like a Beaver

Features:1 to 2 plus full cords per hour •(128 cubic feet)

Cuts up to 16” diameter and up •to 20’ lengths

Splits wood up to 24”•

Splitter cycle time 4-5 seconds•

Honda Engine GX-390, Subaru •14hp or PTO drivenSuper faSt, Super Safe!•

call toll Free1-800-569-6813

www.woodbeaver.net | [email protected]

the FiReWooD FaCtoRy

Safe

Durable

Reliable Convenient

$8995Optional features available

Starting at

Made in

the USa

(262) 673-6801 Local

LiL’ BEavEr ModELCaLL for frEE dvdLiL’ BEavEr ModELCaLL for frEE dvd

‘07 CaT 525C GrappleItem ID: 13384Contact: Sam800.315.9950 x603www.lBXonline.com

‘95 JD 1210 forwarderItem ID: 13435Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘07 Dynamic 565 ChipperGreat Price!Item ID: 13437Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

to be pinned and bushed. No major issues! - Item ID-13212 - Sam 800.315.9950 x6032000 Cat M318 MH - Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Idaho. Financing available. Possible RENT OPTION! - Item ID-12520

- Tom 800.315.9950 x6042000 Fabtek 153 Harvester - 13,000 hours. New Engine; New Pumps; New Roller Chain; Just rebuilt undercarriage. Runs Great! Working today. Item ID-12944 - Tom 800.315.9950 x6042000 GMC 8500 Log Truck w/Loader - 2000 Model GMC C8500: Six speed transmission with a 2 speed rear end. Powered by a strong CAT 3126 engine with 250HP. Approx. 106,000 miles. Truck is single axle with pusher

in front. Pusher purchased new one year ago. Loader is a 1995 Prentice Model 120c w/22’ reach. Has one or two hydraulic drips. Pole Trailer is a 60’s model Frost w 80% tires in very good condition. Pulls great. Item ID-12893 - Tom 800.315.9950 x6042000 New Holland EC215 w/ Waratah 616 Processor - Approx 7200 hours. 2000 New Holland Model EC215 with Waratah 616 Processing Head; Carrier in good condition. Tracks at 70% with 32" pads; Cummins 6BT5.9 engine with 154HP; S/N 721580;

Operating weight = 47000 lbs; Waratah head has top saw option. - Item ID-12849 - Tom 800.315.9950 x6042001 Hydro Ax 721E w/Fecon head - Fecon BH120 mulching head. 8480 hours. John Deere 200HP engine. Serial #7841. Fecon mulcher is a Model BH120 HHD263, the serial # is 12HO17A2. The Fecon needs new bearings. 28L tires at 50%. Comes with a full set of ring chains. Item ID-13230 - Tom 800.315.9950 x6042001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800.315.9950 x6042001 Timbco 820-D Forwarder - Serial #TB154-012901. Hour meter reads 7075 but actual hours are about 9500. Brand new Cummins 260 HP Engine with Cummins Warranty remains on engine. New Coupler between Transmission and Engine. New Pivot pins and Bushings. Pumps resealed and working well. 360 degree Supergrip Grapple. Two Sets Log Bunks. One Set Tracks. Can accept felling head or fixed processor. Item ID-13094 - Tom 800.315.9950 x6042001 Timbco 820-D Forwarder


To Order visit the NEWWWW.AMARKERS.COM

or Call 866-66AMARK [email protected] • Fax:503-663-2850PO Box 1524 Boring, OR 97009

FLUORESCENT LUMBERMARKERS

Family Owned and Operated for Over 20 Years!

Recycle our stubs .30¢ Other wax stubs .50¢

THE BEST - FOR LESS!

SHOP ONLINE

FREE SAMPLES!

The Lumber Industry's Best Extruded Marker!Come for Better Markers - Stay for Superior Quality, Price & Service

‘01 mack TruckItem ID: 13307Contact: Sam800.315.9950 x603

www.LBXonline.com

John Deere 748G-3Item ID: 13381Contact: Sam800.315.9950 x603

www.lBXonline.com

- 21,000 hours on a Cummins 260hp engine. The pins and bushings are tight. Just put a new swivel on the grapple. It has New hydraulic hoses, new drop heater, and new fuel injectors! tire size 28 large by 26 Machine is working now! - Item ID-13217 - Chris 800.315.9950 x6002002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. Item ID-12414 - Tom 800.315.9950 x6042002 Tigercat 845B w Quadco Hot Saw - 8500 hours on machine. About 3200 on new Cummins engine. Quadco

head has 40 degree tilt and new saw blade. Tracks at 60%. Rebuilt 2 years ago. Well maintained. Heat and A/C in cab. Item ID-12751 - Tom 800.315.9950 x6042002 Timbco 425D w/Fabtek Proc. Head - Very nice machine and well maintained. 11,229 hours, but only 1400 on recon Cummins engine. 24” Single Grousers. Undercarriage is 70%. Fabtek has been rebuilt and updated to make it stronger than new. Head works great. Item ID-12659 - Tom 800.315.9950 x6042002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a

new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist.. Main boom to stick boom pin and bushings have been replaced in a the last 3 months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 - Tom 800.315.9950 x6042002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. Item ID-12194 - Sam 800.315.9950 x6032003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic

Pump; Comfort cab with good working heat and air; Tires at 80%. Item ID-12450 - Tom 800.315.9950 x6042003 Hydro Ax 670 with Bunching Head - Super nice machine with ONLY 1600 hours! 30.5 tires at 90%. Cummins 6BT8.3 engine. AC/Heat. Side pocket style head. Jewel of a machine! - Item ID-12729 - Tom 800.315.9950 x6042003 JD 648GIII Dual Arch Grapple Skidder - Refurbished with approx. 8000 hours. 30.5 x 32 tires at 50% or better. The machine is dual arch w/reman arch, boom, grapple, engine and transmission. The machine also has had the normal repairs of: resealed all cylinders, pins and bushings, center pins, cradle and addressed all electrical issues. Any potential problems were found and fixed or replaced. Limited Power Train Warranty.


YOUR CREDIT SCORE IS A PICTURE OF YOUR PAST. AT FCP WE INVEST IN YOUR VISION OF THE FUTURE!TM

CALL NOW! (888) 884-5820 EXT 116 WWW.MYFOUNDATIONONLINE.COM

What could your business do with $25K, $50K, $100K and more! Where can your business be

Examples of Partners Receiving Funds in November!

• $120,000 for a Successful Franchise Expansion• $15,000 for a Growing Retailer Christmas Inventory• • • • $50,000 for Booming Jewelry Store End of Year Inventory• $100,000 for Furniture Stores Q1 2014

CALL NOW! (888) 884-5820 EXT 116WWW.MYFOUNDATIONONLINE.COM

Get the cash you need to:

• Increase you inventory or product line• Acquire new equipment

• Consolidate High-interest debts• Use for anything you want!

FEATURES• Highest approval rates• Quick approval in just 24 hours• No collateral or pledged assets

• “No Red Tape” Guarantee

BENEFITS

• Most Flexible programs in the industry• Programs from $5,000 to $500,000• Get cash in days, not weeks or months

• Short and long term programs available

we have money avaiLaBLe For you!If you recently applied for a bank loan and were denied funding, we can help You! it’s easy to QuaLiFy

Do you or the business currently have an open •bankruptcyfilingorclosedbankruptcywithin the past 12 months?Do you or your business currently have a property in •foreclosure?Doyouhaveliensfiledagainstyourcompany •for greater than $175K

If you answered no to the above questions, please continue—

Do you have more than two months in business?•Do you have a FICO Score of 550 or greater ?•Do you have at least $200,000 in Annual Sales?•

If you answered Yes to the last question, you qualIfy!

Call Now! (888) 608-0419www.MyFoundationOnline.com

Call Now! (888) 608-0419


IntegrIty • PrecIsIon • QuAlIty • VAlue

See why we are your BeSt Source for bandsaw blades!We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US.

Satisfaction always guaranteed!

Ask About Our Dismanteling Blades

thIn KerF BAnd sAw BlAdes

Our Quality • Our Service • Our Price

1-888-857-5153Check

Out

Woodmaster

‘04 Keto 500HD Processing HeadItem ID: 13444Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

Precision 58 Chip PacItem ID: 12764Contact: Sam800.315.9950 x603

www.LBXonline.com

Can exchange existing tires for new and receive credit on existing tires against new tire price. Ex: add new 30.5 x 32 tires for $14,000. Item ID-12905 - Tom 800.315.9950 x6042003 JD 650 G Dozer w/Winch - Nice running condition dozer. Hour meter broken. Estimated 5000 hours. U/C in decent shape with newer sprockets and rollers. 6 way blade. Winch with fairlead rollers. Great support tool for any logging job. Item ID-13270 - Tom 800.315.9950 x6042003 Timberjack 460D Grapple Skidder - (Same as John Deere 648GIII). 8700 hours. 28L tires at 25%. Dual Arch Grapple. Enclosed cab (A/C not working). Winch. Was working when owner retired. Item ID-13440 - Tom 800.315.9950 x6042004 Bandit Beast Model 4680 - 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production capacity! - Item ID-13421 - Tom 800.315.9950 x6042004 Barko 495 Loader w/Delimber - 2004 495 Barko ML. 11000 Hrs. New Turntable Bearing. Upper and Lower Valves Resealed. Both swing motors resealed. New pins and bushings in main and jib boom. CTR 450 Delimber. Cold AC. Item ID-12897 - Tom 800.315.9950 x6042004 Fabtek 546C Forwarder - Good running condition. 30.5 tires in front at 60%. 650 tires in back at 60% and come with tracks. Front blade. JD engine. One owner. Double bunk. Item ID-13363 - Tom 800.315.9950 x6042004 Franklin Q80 single arch grapple skidder with winch - 200 HP Cummins engine Powershift transmission

Comfort cab with working heater and AC New Manifold gasket and bolts New muffler New grapple head New shifter box Tires 85% 28L X 26 Good Solid Machine- Runs great! - Item ID-12843 - Chris 800.315.9950 x6002004 John Deere 700H LGP - This machine has 1987 hrs on a crate motor. Very Strong running machine. Being used daily! Limb Risers, screens,

6 way blade, 30” pads. Item ID-13035 - Chris 800.315.9950 x6002004 Keto 500HD Processing Head - 2004 Keto 500HD 5 knife processor head; The serial number of the Keto


“Providing a full range of industrial metal detectors since 1965.”

MDI probe 2100portable InDustrIal Metal DetectorSimple to operate – just turn on and go!MDI’s superIor DIgItal technology will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control

• Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths

• Bright L.E.D. display indicates signal strength and battery level

• Touchpad control allows precision pinpointing of tramp metal

P.O. BOX 26440 • EUGENE, OREGON 97402PHONE: 541-345-7454 • FAX: 541-345-7971

www.metaldetectorsinc.com

‘08 Dynamic 585 ChipperLow hours; Low price!Item ID: 13422Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

‘01 Sterling TruckItem ID: 13309Contact: SamPh: 800-315-9950 x603

www.LBXonline.com

‘10 TimberPro 735B w/rolly IIItem ID: 13362Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

500 is: R5HT238; (2004 serial number by Hakmet after full overhaul with new style tracks and motors); CanBus computer system w/ 4 wires, 28” cut, top saw separate from head. No computer with head, but this head can work with any Keto/Hakmet computer system. All components in good condition. Item ID-13444

- Tom 800.315.9950 x6042004 Log Max 9000 Proc. Head - Good running condition. Owner was processing 900 tons/day when he shut down job. This unit is similar to Log Max 7000XT. Has optional top saw with it. Parts are similar to 7000 Log Max as well. Rebuilt every year. Many spare parts. Computer included. Super Value! - Item ID-12929 - Tom 800.315.9950

x6042004 Ponsse Buffalo King Forwarder - 18 ton capacity. S/N 120001, 2 part extendable K100 loader. (1) new 750/50x26.5 tire Nov ‘13, (2) tracks rebuilt Nov 2012, (1) track rebuilt Nov 2011, (1) track new Nov 2011, Hydrostats replaced 2010; New centerpin Nov 2011; New front diff; all planetaries and bogies inspected; Nov 2011. Hyd Pump replaced

2010; Loader hoist and stick cylinders repack/repaired Dec 2014; Drop box replaced 2010; New radiator June 2012. Approx 23000 total hours. Timbco clambunk attachment with all plumbing made to attach to Ponsse frame (needs clamps) - Item ID-13151 - Tom 800.315.9950 x6042004 Timbco 425EXL w/360 Hot Saw - Very nice package. 425EXL with 260HP Cummins that is strong. Has Hydro Ax bunching head with side pocket cut with 360 degree rotation allowing this machine to multi-cut large timber without moving. Just 6800 hours. PLUS: Comes with TWO SETS OF TRACKS! 24” and 36”. U/C at 50%. Item ID-13330 - Tom 800.315.9950 x6042004 Trail King belt trailer - 4690 rated at 78 yds. The trailer is in great shape for its age. It has a shurco roll over


VFD Control

All SizeS oF MotorS

MAnuAl trAnSFer

SwitCh

Motor Control StArterS(Solid State)

DiSConneCtSwitCh

AutoMAtiCreDuCeD VoltAge

StArter

CoMbinAtionStArter

reconditioned electrical equipment

saves You Money, Big Money!

We Buy, Sell, or rent— Used, Obsolete and Hard to Find Industrial electrical equipment

Many ItemsIn stock ready for

Immediate shipment!

When you need it NOW—and at the BeSt Price!

YOU Need Weaver eLeCtrIC

call todaY!toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-02186591 N. Washington, Denver, CO 80229

Web: www.weaverelec.comEmail: [email protected]

‘94 Prentice 180D log loaderItem ID: 12759Contact: Sam800.315.9950 x603

www.lBXonline.com

‘09 TimberPro 630B w/rolly IILow hours!Item ID: 13420Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

tarp that will need attention but is in working order. The one piece belt is in great shape, no tears or rips and operates flawlessly. Trailer will be sold as-is for 30k. Also all 8 tires are near new and just passed a DOT inspection station in feb. Item ID-13173 - Sam 800.315.9950 x6032005 Ecolog 580B Harvester - Ecolog 580B Harvester with Log Max 7000 Processing Head w/Steel Rollers. Very good running condition. S/N 240. 7700 hours. Recent updates include: New water pump; New implement pump; New swing motor; New hydraulic oil cooler and oil cooler bypass valve. It has a DASA4 control system and ICAN monitoring system. Rear bogeys are 650

size and include one set of tracks. Engine is Cat 3126. Equipped with a Wabasto preheater. Machine is factory reconditioned by Ecolog. Center section and bearings are new. Item ID-12826 - Tom 800.315.9950 x6042005 John Deere 903G Feller Buncher - GN Roy 22’’ continuous saw head. Heated & A/C cab. Standard boom. Medium pads. Operator,

service, and parts books included. Item ID-13203 - Sam 800.315.9950 x6032005 Komatsu D39 PX Dozer - Approx. 2150 hours, 6-way dozer, canopy, joystick controls, limb risers 25" pads, SBG, new hydrostats and pumps Undercarriage 75%, condition good to very good - Item ID-12994 - Tom 800.315.9950 x6042005 Logmax with top saw - In

good condition with lots of extra parts - Item ID-13430 - Contact-Barbara Martin - Phone- 800-315-9950 ext 606 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 8500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles


Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang • Edger • ScraggTrim • Split • Strob

…and just about any Custom Saws you need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to ship from major manufacturers, including…

‘03 Timberjack 460D Gapple Skidder(Same As 648GIII)Item ID: 13440Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘99 Bandit 1900 Tracked Chipperw/LoaderItem ID: 13294Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

up to 27” whole trees. Set up for 2” chips. Recently came off job. Well maintained and in good condition. Item ID-12690 - Tom 800.315.9950 x6042005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. Item ID-12413 - Tom 800.315.9950 x6042005 Tigercat 718 FB w/5500

Saw Head - Very well maintained machine with 9400 hours. Dry and tight. 28L tires at 60%. Running good today. AC blows cold. Heat works great. Center section tight. Item ID-12939 - Tom 800.315.9950 x6042005 Timberking TK360 Feller Buncher - 2005 Timberking TK360 Rubber tired feller buncher, good condition 9023 hours, new A/C. 22" high-capacity head w/side cutter put on at 5000 hours.

Front tires at 75%, back tires 50% - Item ID-12995 - Tom 800.315.9950 x6042005 TimberPro 620 Bogey Grapple Skidder - Very good running condition. Big Capacity Grapple! 9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders, grapple arch, steering; Replaced hydraulic hoses and lines where needed, fill pump, grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced center pins; Straightened and painted panels; Changed all fluids and filters; Re-insulated cab; Checked and fixed wiring as needed - Item ID-13438 - Tom 800.315.9950 x6042005 TimberPro 830TF

Forwarder - 6580 hours. Very good condition. Tracks for all bogies. 710/45-26 tires at 70%. Includes bolsters and back rest. Comes with 36” grapple with grapple saw option. Set up with harvester hydraulics according to owner. Item ID-13161 - Tom 800.315.9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 16,800 hours. New hydraulic transmission and gear box in 2013. $70,000 of updates in 2012. Bogies just resealed. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. One set of Mud Tracks like new and one set rock tracks at 25% . Front blade. Hood guard. Item ID-12267 - Tom 800.315.9950 x6042005 Valmet 941 Harvester - Totally refurbished head


www.corleymfg.com • [email protected]

CORLEY mfg

Now One Phone Puts You in Touch with ThE Single Source

for all your Sawmill Needs!CORLEY SAwMILL MACHINERY

TYRONE BERRY CARRIAGE DRIvESLEwIS CONTROLS OPTIMIZATION

Carriage linear & Set Shaftlewis Controls “electronics for sawmills by sawmillers”Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers

Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

call (423) 698-0284

‘94 CaT D4H Dozer w/winchhas Fairlead!Item ID: 13424Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

‘01 Volvo TruckItem ID: 13308Contact: SamPh: 800-315-9950 x603

www.LBXonline.com

(8 Models)

over 26 years in Business

12', 20' and 30'

We noW haveModels toChoose From88

pauL Bunyan showoctober 3–5cambridge, oH

The Original American Forestr y ShowT h e o l d e s T f o r e s T i n d u s T r y s h o w i n T h e u n i T e d s TaT e s

October 2 - 4, 2009f e aT u r i n G :

n Live Equipment Demonstrations and Sales

n Lumberjack Competitions & Entertainment

n Game of Logging Finals

eVenTs & seMinars desiGned for:

n High Production Sawmills (saw filing and maintenance)

n Forest Landowners

n Portable Band Saw Owners

n Professional Loggers

n CE Credit Available

No pets or unauthorized vehicles permitted on show grounds.

®

for more information,visit www.ohioforest.org.

888-38-TREES Guernsey County Fairgrounds,

Cambridge, OHJust six miles east of I-77 and I-70.

LaKe states LoggingSePt 5–6oshkosh, WI

to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Engine runs well. Tires at 50%. This is a hard to find gem and priced below market. Item ID-12569 - Tom 800.315.9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours. 370E Harvesting head just added in 2010 and has 7000 hours. 36” Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. Still runs OK. Cutting today but

will needs some basic updates soon. Item ID-12266 - Tom 800.315.9950 x6042006 Loglift Model 140 Stationary Loader - Like new Loglift Model 140 Stationary Loader. Photo shows machine as it would look in operation. Actual unit is on pallet and ready to ship as seen in other photos. Less than 1500 operating hours. Comes with complete power pack for running machine. Includes stainless steel operators cab with joystick controls. 30’ reach. Continuous bypass grapple. Loglift is the highest quality loader made in Europe. Parts readily available in US. Lift capacity of about 2200 lbs at max reach. Smooth on demand hydraulic system. Priced at a fraction of new. Item ID-13275 - Tom 800.315.9950 x6042006 Morbark 18 Hurricane

Chipper w/Loader - Good running portable chipper equipped with loader. JD 6068 engine with 250HP. Hydraulic swivel Discharge Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has 2 new

tires. Item ID-12964 - Tom 800.315.9950 x6042006 Morbark 6600 Horizontal Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS &


20’ long, 3-Strand Edminston log deck with stop and •loader and 3-spring loaded kicker armsMeadows chain type hydraulic log turner•214 Tyrone Forest Products hydraulic carriage drive w/30 •HP motor

Also included: Log Carriage and belt conveyor; control room; Edger; Rolling Stock; and Truck and Tri-axle trailer

SawmillCompletefor Sale

reuse reduce recycle

Item ID: 13449Contact: Chris Woods800.315.9950 Ext. 600www.LBXonline.com

Lumberman's exchange

theOriginal

Providing quality used equipment for 28 years!

‘96 Peterbilt TruckItem ID: 13317Contact: SamPh: 800-315-9950 x603

www.LBXonline.com

SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin - $20,000 which is half price of new. Item ID-12692 - Tom 800.315.9950 x6042006 Tigercat 720D Feller Buncher - with New Cummins Engine, Enclosed Cab heat & air, 28.1 x 26 Tires, 5000 series sawhead. 7012 hours. Very good condition. S/N 7204313 - Item ID-12752 - Tom 800.315.9950 x6042006 TimberPro 830 COMBI Harvester/Forwarder - Just 5700 hours. Very good condition. Comes with grapple for loading forwarder and Log Max 7000 processing head for harvesting. 2 sets of tracks for bogies. Set up for quick change from harvester to grapple. One man operation. Log Max head has top saw and runs well. Compare to new machine at $650,000. Item ID-13439 - Tom 800.315.9950 x6042007 Cat 525c Grapple - great


‘06 TimberPro 830 Combi Harvester/forwarderOne-Man Operation!Item ID: 13439Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

forest-all millItem ID: 12762Contact: Sam Ph: 800-315-9950 x603www.LBXonline.com

condition! - Item ID-13384 - Sam 800.315.9950 x6032007 Dodge Service Truck - with 5.9L Cummins. This is the last of this kind of engine. Includes tools, fuel tank, spare parts, and air compressor. Super Package! - Item ID-12910 - Tom 800.315.9950 x6042007 Liebherr A924B Wheeled Log Loader - 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world. This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard

machine. Item ID-12503 - Tom 800.315.9950 x6042007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts

hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckle boom loader, 25 ft reach, 210 degree swing. By-pass grapple. Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. Item ID-12449 - Tom

800.315.9950 x6042007 Morbark 2355 Flail Chip Harvester - Three knife, three flail machine. New long block engine installed in September of 2011; About 5600 hrs on it now. Total hrs on the unit are approx 11,000. Also, there is an extensive parts inventory and a knife grinding machine


Real Tuff BaleR&BaggeRtm

phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$15,905

Real Tuff IndusTRIes

REAL TUFF INDUSTRIES

PO Box 693Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

Brownwood, Texas 76804Phone: 325-641-8300 Fax: 325-643-3243

. Easy to use

. Built of high quality materials and workmanship

. Heavy Duty to enable a broad spectrum of baling options

.Easily loads by conveyor or manual method

Most Popular Baler Sizes

12” x 16” x 36”12” x 16” x 32”11” x 17” x 36”8” x 18” x 36”

Real Ruff Baler Size

5” x 10” x 16” - Call For Price

4.0 cubic foot bale3.5 cubic foot bale3.9 cubic foot bale3.0 cubic foot bale0.4 cubic foot bale

Bale Size Bales per Hour

50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour

. .Custom baler’s can be manufactured to your specifications

Real Tuff Baler Dimensions & Specifications

2 - Hydraulic Cylinders are controlled by using a two spool valve

30 H.P. motor (220/440 volt 3 phase) starter not included

25 G.P.M. Pump

50 Gallon reservoir capacityOnly the highest quality industrial components are used

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty daysfrom placement of order. F.O.B. Brownwood.

03/08

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminumcans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Price: $12,997.00

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!Electric or Diesel, Manual or Automatic

• Easy to use

• Built of high quality materials and workmanship

• Heavy duty to enable a broad spectrum of baling options

• Easily loads by conveyor or manual method

real tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

Effective May 1, 2012

‘10 Prentice SkidderItem ID: 13382Contact: Sam800.315.9950 x603

www.lBXonline.com

‘05 TimberPro 620 Bogey SkidderHuge Capacity!Item ID: 13438Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

Custom firewood Proc.Item ID: 13108Contact: Sam800.315.9950 x603

www.LBXonline.com

‘94 Prentice 410D loaderItem ID: 13447Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

(with knives) that can be purchased separately with machine. A well maintained machine that was working well up to being shut down at end of job. Item ID-13134 - Tom 800.315.9950 x6042007 Peterson Model 4800E Portable Debarker - Good running machine and very well maintained. 9950 hours approximately. CAT 3306 Engine. $40,000 in recent maintenance with records from owner. Great unit for making clean chips. Item ID-12941 - Tom 800.315.9950 x6042007 Prentice 384 TMS Loader Package - 2007 Prentice 2384 t/a trailer mounted log loader Cummins 6-cyl engine. New injectors and pumps in Jan '13. New a/c installed, 32' length boom. 2006 John Evans trailer with 75% 11-22.5 tires. Includes CTR Delimber. Condition is good - Item ID-

12997 - Tom 800.315.9950 x6042007 Tigercat 250B Crawler w/Waratah 622B Processing Hed - 9500 hours. The 622B Waratah head is in great shape. 3 new wheel motors on the head all new pins and bushings. Head has been totally rebuilt less than 500 hrs ago. The swing motor on the carrier has just been rebuilt and a new Hydraulic pump. U/C at 50%. Currently processing 600 tons/day. Runs great. Owner shutting down. Item ID-13360 - Tom 800.315.9950 x6042007 Tigercat 718E Feller Buncher - with 5000 Bunching Saw Head. 8900 hours. Very well maintained. Good running condition. Cummins engine. Tight and dry. 28L x 26 Tires at 50%. 1000 hours on rebuilt engine. Item ID-12989 - Tom 800.315.9950 x6042007 Valmet/Komatsu Model

911 Extreme Harvester - Only 4000 hours on this special machine. Has new Log Max 6000 added in 2013. Individual tracks on each hub allow this machine to climb where NO OTHER MACHINE can go! 4 New 700 tires and rims come with it for rubber tired operation. Recently gone through and updated. Very unique and hard to find a machine like this! Priced well below market. Sold new without head in 2008 for $575,000! - Item ID-12571 - Tom 800.315.9950 x6042008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck.

Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID-12694 - Tom 800.315.9950 x6042008 JD 2554 Loader w/Waratah 624 - Hi Rise tracked carrier with the Waratah Model 624 processing head. 8773 Hours. Cab riser. Undercarriage at 60% as inspected by local dealer. Currently running and producing over 20 loads/day. Item ID-13235 - Tom 800.315.9950 x6042008 JD 648H w/Swing Boom Grapple - Very clean and unique machine. 6800 hours and well maintained by one owner. Young Swing Boom grapple gives you extra reach and capability. 30.5 x 32 tires at 70%. A/C and Heat run great. Pins tight. Hydraulics dry. Engine strong. Item ID-13357 - Tom 800.315.9950 x6042008 John Deere 344J - Only


frick SawmillItem ID: 13418Contact: Sam800.315.9950 x603

www.lBXonline.com

‘04 fabtek 546C forwarderItem ID: 13363Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘98 711EX Saw Head BuncherLow Price! Good Cond!Item ID: 13353Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

900 Hours!! Great running condition, z-bar, 3rd valve, ride control, intake heater for cold weather starting, heat/ac, stereo - Item ID-13034 - Sam 800.315.9950 x6032008 Ponsse Ergo Harvester - Very clean unit with just 8600 hours. Equipped with the advanced Ponsse H-7 Head and C-4 Boom. One owner. Well maintained. Tracks for bogies. Superior Value - Item ID-13060 - Tom 800.315.9950 x6042008 Prentice 2210 Stationary Mount Loader - stationary electric; features joystick operation and 75hp electric motor; 440v. FOB: Georgia 8000 hours. Maintenance records available. Mill closed. Machine working well when mill ended operation. Item ID-13017 - Tom 800.315.9950 x6042008 Prentice 2670 Feller Buncher - 28L tires, SH56

hot saw head, 5.9 Cummins engine. Item ID-13190 - Sam 800.315.9950 x6032009 TimberPro 630B w/Rolly II Harvester Head - Very clean. Just 5900 hours. New tracks on bogies and new chains on singles. Cummins engine runs well. Gull Wing Engine access gives easy maintenance to all major components. Rolly II works great in hardwood and is in very good condition. Total machine just overhauled. Item ID-13420 -

Tom 800.315.9950 x6042010 JD 848H Grapple Skidder - 5000 hours. Running duals at this time. Powerful machine. Everything working great. Tires at 50% or better. Item ID-12800 - Tom 800.315.9950 x6042010 John Deere 1110E Forwarder - Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and well maintained. Hard to find them with low hours like

this! - Item ID-12947 - Tom 800.315.9950 x6042010 John Deere 703J Harvester - 9622 Hours. One Owner Machine. Good undercarriage. Recent boom update. Well maintained. Runs very well. Will include service trailer. Item ID-13419 - Tom 800.315.9950 x6042010 Prentice 2280 TMS Loader Package - Super clean


great DeaLs

caLL tom at 800-315-9950 ext 604

look to lumberman’s exchange for great deals on fuel efficient and productive three-wheeled feller bunchers! If you need a low cost thinning machine that won’t crush your pocket book, check out these great values at Lumberman’s Exchange! Go to www.lbxonline.com

or call Tom Hirt at ext. 604 for details.

Low fuEL ConSumPTion • Low PRiCELESS ExPEnSivE To TRanSPoRT • EaSy To mainTain!

1998 valMet 603 3-WheeleD FelleR BUnCheR W/SaW, Item ID: 13367 ...........................$35,000

1996 valMet 603 3-WheeleD FelleR BUnCheR W/SaW, Item ID: 13155 ............................$34,500

1998 valMet 603 3-WheeleD FelleR BUnCheR W/SaW, Item ID: 12525 ............................$44,000

1995 MoRBaRk WolveRine 3-WheeleD FelleR BUnCheR W/SheaR, Item ID: 12531 ...$23,000

1993 Bell UltRa t tRaCkeD FelleR BUnCheR W/DiReCtional SaW, Item ID: 13286 .....$45,000


‘08 John Deere 334J Only 900 hrs!Item ID: 13034Contact: Sam800.315.9950 x603www.lBXonline.com

‘85 Barko 350 loader on Pierce CarrierCan pull loaded trailers!Item ID: 13445Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘93 Timberjack 1010 forwarderInexpensive!!Item ID: 13446Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘93 Prentice 210D on Truck Item ID: 13448Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

loader/delimber package on trailer. Just 4400 hours. Cummins engine. CTR delimber works great. AC/Heat/Radio in cab. Engine runs great with no blow by. Tight and dry. Item ID-12871 - Tom 800.315.9950 x6042010 TimberPro 725B w/Rolly II Processor - Super Clean Machine. Runs great. Has worked double shifts so it has higher hours at 12,200, but has been well maintained. New U/C last year. 24” grousers. Gull wing engine cover with hydraulic lift for easy maintenance. Rolly II in good condition and computer measures well. Owner retiring. Bought new for $540,000! - Item ID-13362 - Tom 800.315.9950 x6042010 Woodsman 440TL Tracked Chipper w/Loader - ONLY 1700 hours. Contractor finished job. Operator controls entire operation from cab. 700 HP Cummins engine. 50” mill. High flotation 36” triple grouser pads on 80% undercarriage. Super Package. Sold new at over $500,000. Item ID-12665 - Tom 800.315.9950 x6042011 Builtrite Model 60 Stationary Loader - Electric Loader. New Condition with

only 95 actual hours. The Model 60 has 18’ of reach and about 1,100 pounds of lift at full reach, with the grapple attached. The grapple is a ¼ cord, butt styled with gripping bars. It opens to 66” and is 20” wide. This package includes everything from the power pack to the comfort cab with head and AC. If you have a loading challenge in your operation, this is an economical and quiet way to handle it. Item ID-12705 - Tom 800.315.9950 x6042011 Carlton Tracked Chipper - 1900 hours. Well maintained. JD 140HP engine; Winch; Auto Feed System; Remote Control; Extra Knives. Very nice unit for handling biomass or for a Tree Service. Compact and

rugged! - Item ID-13351 - Tom 800.315.9950 x6042011 Case TR320 Tracked Skid Steer Mulcher - 2011 Case Skid Steer with mulching head and bucket. Only 300 hours and in excellent condition. Skid Steer has Hi Flow option for maximum performance to head. Item ID-13020 - Tom 800.315.9950 x6042011 JD 1010E 8-Wheeled Forwarder - Super Nice Machine! Just 2300 hours. Owner downsizing. Comes with new set of tracks and set of chains. Item ID-12955 - Tom 800.315.9950 x6042011 JD 748H Grapple Skidder - 4600 hours. Good running skidder. 30.5 tires at 60% with dualing rings. Dual

arch grapple. Heat/AC. Well maintained. Item ID-13176 - Tom 800.315.9950 x6042011 JD 848H Grapple Skidder - Just 3200 hours. Excellent condition. Running duals for high flotation. Dual Arch. Winch. Comfort cab! - Item ID-12801 - Tom 800.315.9950 x6042011 Morbark 5500 Chain Flail Delimber/Debarker - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condition. Reasonable offers considered! - Item ID-13322 - Tom 800.315.9950 x6042011 Puma 612 Forwarder - with under 4000 hours. The machine has the new Barko 612 cooling package


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

aJD Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500Email: [email protected] • Web: www.ajdforestproducts.com

DRy KiLnS • 2 SawmiLLS • 25,000,000 Bf annuaL PRoDuCTion

‘98 Valmet 603 Buncher w/Saw Runs good!Item ID: 13367Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

13 CaT 525C Grapple Skidderwow! has warranty!Item ID: 13349Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

update + some other minor repairs. Volvo 220HP engine is very fuel efficient. 12,000 lb capacity. Comfort cab. Kesla Loader and Supergrip grapple. Very good running condition - Item ID-13091 - Tom 800.315.9950 x6042011 Puma 612 Forwarder - Has new cooling system installed along with other minor repairs. S/N = F6121004110414. 3600 hours. Volvo 200HP Tier III

engine. Tires: 28L x 26 front; Nokian 710/45x26.5 rear. All at 70%. Front Blade; 12,000 lb. capacity. Cab w/Heat and AC. Kesla Crane and Hultdins grapple. FOB: Rhinelander, WI. Item ID-13092 - Tom 800.315.9950 x6042011 Remanufactured KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P ( Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). Clark 28000 Series

Powershift Transmission. John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. ESCO Dual Arch Grapple. Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights, Swivel Suspension seat c/w Joystick Controls. Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve - New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty Cast Steel KMC Road/Idler Wheels. Standard Decking Blade. FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID-12549 - Tom 800.315.9950 x6042011 Valmet 430FXL w/ Keto 870TS Proc. Head - with

Komatsu built undercarriage. Includes KETO Model 870TS Processing Head. Less than 3000 hours on total machine. Excellent condition. Head will have all updates according to owner. Compare to new at $600,000! - Item ID-13029 - Tom 800.315.9950 x6042012 Lamtrac 8400T Mulcher - just 25 demo hours. Full Factory Warranty remains. Cummins 400HP engine. Lamtrac known as best performing carrier on market. Great serviceability. Spacious operator’s station. Spec sheet available at www.lamtrac.com - Item ID-13272 - Tom 800.315.9950 x6042012 Log Max 7000C Processing Head - Only 865 hours. Like new condition. All components included such as Log Mate 402 computer and Super Grip handles. Ready to install on proper carrier. Item


ideal to Grind:

Simplicity MasteredEase of Operation with Less DowntimeChange Particle Size While You Grind

UNIvERSAL REFINER CORPORATIONP. O. Box 151 • Montesano, WA 98563

800-277-8068

the rascal h.A.w.g.

Construction Waste • Stumps • Land ClearingGreen Waste • Asphalt Shingles • Palm • Pallets

Difficult & Dirty Materials


‘99 John Deere 450H DozerClean!Item ID: 13354Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

2005 Valmet/Timbco 415 Harvester w/370E HeadItem ID: 12266Contact: Tom800.315.9950 Ext. 604

www.lBXonline.com

reDuceDEvery Reputable Wide Band Supplier Offers 3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite

• Cutting Edge Plasma Welds• The Industry’s Highest Band Saw Capacity• Quick Delivery from our HUGE Inventory• Fast Sharpening & Exchange Program to Keep YOU Running• Competitive Pricing And ONLY Menominee Gives You Everything

You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most

Knowledgeable Staff.

Got a Wide Band Problem?Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!

BUT ONLY THEBY MENOMINEE SAW GUARANTEES

WOLVERINE

WWW.MENOMINEESAW.COM

TOLL FREE1-800-582-0470

900 16th St., Menominee, MI 49858Tel: 906-863-2609 Fax: 906-863-1147Email: [email protected]

ID-13074 - Tom 800.315.9950 x6042012 Rayco C-100 Tracked Mulcher - 100hp Kubota Engine. Only 1450 hours. 80% track life remaining Serial Number available. Runs good. Has some cosmetic dings and dents, but mulches well. Compact and great for small jobs. Item ID-12908 - Tom 800.315.9950 x6042012 Refurbished FMC 210 Tracked Skidder - 1976 Model that has been totally refurbished in 2012. No hours since updates were

done. Includes warranty on machine and tracks. Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission. Clark 40,000 lb Winch. ROPS Cab. Includes bolt on grapple head with full function. New Paint. Item ID-12731 - Tom 800.315.9950 x6042013 Cat 525 C Grapple Skidder - Not much to say. Super Clean Cat 525 with only 2300 hours and a 5000 hour Power Train warranty. 30.5 tires are new in back and 60% in front. Save $50,000 off new machine and still have

warranty! - Item ID-13349 - Tom 800.315.9950 x6042014 630 D Tigercat - 1300hrs like new inside 35 by 15, CB, light package, large grapple and wench - Item ID-13408 - Barbara 800.315.9950 x6062432 2010 prentice skidder - It has 30.5 tires al the way around and has 6,000 hours on the machine. Item ID-13382 - Sam 800.315.9950 x603‘69 207 Timberjack cable skidder - This Machine has a Brand new 4 cyl Perkins Engine, Major Overhaul out of frame. Transmission has been completely overhauled out of frame. Reverse box also overhauled out of frame. Has a new Injector pump and all new injectors. 25% on tires on it. Item ID-13283 - Chris 800.315.9950 x600‘84 Eager Beaver Trailer - 9' wide by 48' long. Detached front, middle drop is 26 feet. Load from the front or back. Tires and brakes are 80% sand blasted painted, everything goes, chains, binders, cones. Excellent condition. Located Southern NY. Item ID-13096 - Chris 800.315.9950 x600‘88 450B Timberjack - Put new centerpins in 8 months ago,

it has a new eslking beams & new radiator. Goo winch, 100” Esco grapple, all new drive lines, excellent 6 cyl cummins motor, good brakes. It’s skidding 25-30 loads a week on smaller jobs. Item ID-13327 - Chris 800.315.9950 x600‘95 Bell Ultra T on tracks - 95% undercarriage.5400 hrs, Has the biggest Deutz engine. Heat and air. Machine is in Great running condition! - Item ID-13301 - Chris 800.315.9950 x600‘95 Bell Ultra T on Tracks - 75% undercarriage w/ a 30” bar and has a shear head. This machine is in great condition and is being used on a regular basis. Item ID-13303 - Chris 800.315.9950 x600Cat D5B Dozer - Cat D5B s/n 22X380, direct drive, EROPS, S-Dozer w/ tilt.; Limb risers; Hyster Winch, serviceable u/c - Item ID-13113 - Tom 800.315.9950 x604Extec Shredder - Item ID-12926 - Sam 800.315.9950 x603JD 555G Crawler - late 80’s has about 5,200 hrs on it. Bucket and forks included. The transmission was recently rebuilt. Everything is in good shape - Item ID-13403 - Chris 800.315.9950 x600JD 643D Saw Head FB -


reDuceD2001 Timbco 820-D forwarderItem ID: 13094Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

‘79 CaT D5B w/Hyster WinchPriced to Move!Item ID: 13364Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘88 Cat D5 TSK w/GrappleItem ID: 13298Contact: Tom800.315.9950 Ext. 604www.lBXonline.com

Decent machine. Estimated 1993 model. Serial number available for verification. Recent JD recon engine. Tires at 60%. Cameco Saw Head. Needs new teeth. AC works. Running today. Priced to move. Item ID-12845 - Tom 800.315.9950 x604John Deere 748 G-3 - This is an awesome skidder it just had a full service all bushings and pin replaced and READY FOR WORK! it has 9745 hours on it. Item ID-13381 - Sam 800.315.9950 x603KMC 1400 - 85% KMC tracks, w a 353 Turbo Detroit

Engine. Engine is completely overhauled w Zero hrs on it. Everything else is in excellent condition. Item ID-13402 - Chris 800.315.9950 x600Morbark 1200 Tub Grinder - Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are unknown. Item ID-12919 - Sam 800.315.9950 x603Timberjack 240D Cable Skidder - Brand-new Motor, Front Chains, Tires are in great condition. Machine is built to Last! - Item ID-13433 - Sam 800.315.9950 x603

PLANERS2006 Logosol Planer - This is a 10” 4 sided planer that has

removable side cutters that will take up to 12” lumber and includes a blower system. Item ID-13428 - Barbara 800.315.9950 x606

PORTABLE SAWMILLWoodMizer LT 70 HD - 2003 with 65 HP diesel. Remote. 6 ft bed extension. Debarker. Laser Kit. Trailer Kit. Electric over hydraulic option. Filing kit. Extra saw blades. Mill has just less than 6,000 hrs on it. 1 owner - Item ID-13345 - Chris 800.315.9950 x600

RECYCLING EquIPMENT1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc,

Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Sam 800.315.9950 x6031997 Morbark Model 2400 Chipper - Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID-13429 - Barbara 800.315.9950 x6061999 Bandit 1900 Tracked Disc Chipper - 1999 Bandit 1900 Track Disc chipper. Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID-13294 - Tom 800.315.9950 x6041999 Morbark 1400 Tub Grinder - Loader w/Cab; 4200 hours; Very good condition. Located in PA - Item ID-13361 - Tom 800.315.9950 x6042001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800.315.9950 x6042012 Lamtrac 8400T Mulcher - just 25 demo hours. Full Factory Warranty remains. Cummins 400HP engine. Lamtrac known as best performing carrier on market. Great serviceability. Spacious


SePTeMBer 2014 PreSS reLeASeS

BanDit BRoaDenS inteRaCtion with Blog, Expanded Social Media

Bandit Industries’ website looks slightly different. A new blog, along with live feeds from the

company’s Facebook and Twitter accounts, now share space on the home page at www.banditchippers.com.

These improvements offer visitors to the chipper manufacturer’s website the ability to see live social media updates, and interact directly with the company – all from a single online location.

“Since Bandit started, we’ve been proud of the close relationships built and maintained with our customers,” said Christopher Smith, marketing and communications director for Bandit Industries. “In our early years, customer feedback helped to guide our product line, and that has never changed. We still work closely with customers to not just build better equipment, but build the custom equipment they ask for. Social media is a great way to foster relationships even further, and that’s exactly why we are proud to take this next step forward.”

Bandit’s new live blog will be updated regularly with content that readers can comment on. Blog topics will vary, ranging from equipment tips, community events and sponsorships like NASCAR, to a look inside Bandit machines and the people who make and buy them.

Along with live feeds from Facebook and Twitter, Bandit has expanded its presence on LinkedIn with articles of business interest. For those who like pictures, Bandit has a new Pinterest page.

And for those who like to see the machines in action, the company offers a popular new video series on YouTube titled “Two-Minute Demo.” In approximately two minutes, people can watch rapid-fire videos of Bandit machines in action. All are linked directly through Bandit’s home page.

“Since the very first chipper, Bandit has engaged customers in a discussion about the machines they use in the industries they love,” said Smith. “Social media is a great way to broaden that conversation to share more ideas and include more points of view.

FeCon hoStS "I Make America" Nationwide Tour

Fecon Inc., in Lebanon, Ohio, hosted a stop on the nationwide I Make America Harley Tour. On

behalf of the Association of Equipment Manufacturers (AEM), I Make America and its more than 30,000 supporters advocate for pro-manufacturing policies to create more jobs in the U.S. and keep the economy competitive with other countries.

The Harley is taking to the open road in a uniquely designed truck with glass sides. It stopped at Fecon Inc., located at 3460 Grant Dr. in Lebanon in June.

The purpose of the Harley Tour is to raise awareness about I Make America and its mission, as well as engage AEM Member Companies and their employees to help make a difference. Everyone who signs up through October 3 has a chance to win the 2014 Harley-Davidson Road King, featuring a custom I Make America paint job. You can still enter by visiting www.IMakeAmerica.com for a chance to win the Harley and become an I Make America supporter.

“We at Fecon strive for greatness with every product we create. It is important to the manufacturing industry as a whole to make every effort to bring this country’s economy back to its highest strength and excellence,” said John Heekin, Fecon Inc. President. “The I Make America program epitomizes support for our industry, economy, and country as a whole, and AEM is the backbone behind these efforts. AEM is coming here to encourage the public to draw the attention of government representatives to serious issues affecting the manufacturing industry.”

“I Make America was created to be a force for positive change in the equipment manufacturing industry,” said Dennis Slater, AEM President. “Economic conditions in

For a worldwide company that thrives on the words and wishes of its customers, these types of communication tools are simply extensions of who we are. Bandit and its employees are excited to broaden that level of communication to its fullest.”

Visit Bandit and engage with them online at www.banditchippers.com.

America remain a challenge and we need our government to partner with us to advance pro-manufacturing policies that address those challenges. I Make America is our platform to spread awareness and maximize our voice in Washington, DC.”

According to AEM, about one in six private sector jobs in the U.S. depend on the manufacturing base. Congress can help to create business conditions that will grow the economy and U.S. manufacturing jobs by encouraging infrastructure investment, protecting U.S. farming and increasing American exports for our economy to keep pace with other countries.

If you would like more information about Fecon or I Make America please call Courtney Shafer at 513-696-4430 or e-mail at [email protected].

Demo Days2014

October 2-3, 2014MORBARK HEADQUARTERS • WINN, MICHIGAN

Vendor displays, networking, food and entertainment—and, of course, live equipment demonstrations at our dedicated demonstration site—make Morbark’s 2014 Demo Days the “must attend” event of the year!

During Demo Days, you will get to explore Morbark’s manufacturing facilities and learn firsthand about the cutting-edge technologies, materials and processes used to manufacture our industrial equipment lines. In addition, we’ll be offering educational and interactive experiences designed to help you learn more about our equipment and the opportunities our equipment helps to create.

Registration for Morbark’s 2014 Demo Days is limited and will be filled on a first-come, first-served basis. To register, simply complete and return the attached registration card or call us with the information, and we’ll take care of the rest.

We look forward to seeing you soon at our 2014 Demo Days!

This year’s event has a special treat! October 3, 2014, is National Manufacturing Day! To celebrate the day and show our support for the Association of Equipment Manufacturers’ I Make America campaign, our Demo Days has been selected as the final stop on AEM’s 30-city I Make America Harley Tour. The custom-painted, I Make America 2014 Harley-Davidson Road King will be on display throughout our event, and employees and guests will have the opportunity to enter for their chance to drive it home! We also have invited state and local politicians to celebrate National Manufacturing Days with us, so it is shaping up to be an event you don’t want to miss!

MoRBaRk DeMo DayS October 2–3, 2014

this year's event has a special treat! October 3, 2014, is National Manufacturing Day! To celebrate

the day and show our support for the Association of Equipment Manufacturers' I Make America campaign, our Demo Days has been selected as the final stop of AEM's 30-city I Make America Harley Tour. The custom-painted, I Make America 2014 Harley-Davidson Road King will be on display throughout our event, and employees and guests will have the opportunity to enter for their chance to drive it home! We also have invited state and local politicians to celebrate National Manufacturing Days with us, so it is shaping up to be an event you don't want to miss!

Registration for Morbark's 2014 Demo Days is limited and will be filled on a first-come, first-served basis. To register, simply visit our website at www.morbark.com/demo-days-registration.

We look forward to seeing you soon at our 2014 Demo Days!


2014-15 OFA-PBS ad (lumberman's xchng).indd 1 6/18/14 9:25 AM

operator’s station. Spec sheet available at www.lamtrac.com - Item ID-13272 - Tom 800.315.9950 x6042012 Rayco C-100 Tracked Mulcher - 100hp Kubota Engine. Only 1450 hours. 80% track life remaining Serial Number available. Runs good. Has some cosmetic dings and dents, but mulches well. Compact and great for small jobs. Item ID-12908 - Tom

800.315.9950 x604Morbark 1200 Tub Grinder - Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are unknown. Item ID-12919 - Sam 800.315.9950 x603

SAWMILL1984 Lane Model 8400 Saw Mill - Heavy duty four 14’ (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame. Surprisingly good condition! Great Value

at this price!! - Item ID-12689 - Tom 800.315.9950 x6041996 Woodmizer LT-40 HD Portable Sawmill - Hour meter reads 4,393 hrs 4 cyc; 40 hp Lombardini; rebuilt at 4,000 hours complete Also has debarker and ride along seat Mill in excellent working condition - Item ID-13372 - Chris 800.315.9950 x6001996 Woodmizer LT40 Portable Sawmill - Mill model:

LT40HDD40 Hour meter reads 4,393 hrs 4 cyc; 40 hp Lombardini; rebuilt at 4,000 hours complete Also has debarker and ride along seat Mill in excellent working condition - Item ID-13398 - Sam 800.315.9950 x603Cleereman model 40- 3 knee - Right hand Includes track and controls. Electric over air setworks. Item ID-13240 - Chris 800.315.9950 x600Frick Sawmill - 2000 Frick 48” bladeall metal, rails and bunk. 250 TURBO Cummins Engine. All in Great Shape!! - Item ID-13418 - Sam 800.315.9950 x603Newman Shavings mill. - model 1044. Single box machine. Item ID-13377 - Sam 800.315.9950 x603Piper portable automatic sawmill - All steel, heavy duty w a 12” eye beam frame. Mounted on dual axel w goose neck hitch, carriage is 13’ 5” long/ 3 hd block, 2 dogs, live deck w chain turner. New 250 hp deautz engine. Electric over hydraulic. All the power components are on a separate track and trailer. Mill is set up for high production. Item ID-13431 - Chris 800.315.9950 x600

SHAVING EquIPMENTJackson 16 4D Shaving Mill - 2005 Jackson shaving mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6 sets of knives This unit is in excellent condition! - Item ID-12796 - Chris 800.315.9950 x6001997 Morbark Model 2400 Chipper - Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID-13429 - Barbara 800.315.9950 x606

THE LuMBErMAn’S ExCHAnGEPost Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

New Track B-66

with Transport Dolly

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376

Documents

The Lumberman's Exchange brought to you by LBXonline.com