The Kitchen Loft - STEPHENWANGELstephenwangel.com/images/CONTRACTOR/ABEL_APPL.pdf · PDWF580PSS - GE Profile™ Dishwasher with SmartDis... Page 2 of 3 Monday, February 23, 2009 This

The Kitchen Loft 90 Wood Street Lynbrook, NY 11563

Tel/Fax: 516/599-5946

www.StephenWangel.com

Schedule of appliances:

Appliance Brand Model Type Dimensions Door Panel ?

Refrigerator A GE PGCS1PJXSS FRENCH DOOR 36 X 70 X 24 NO

Refrigerator B —

Wine Cooler —

Beverage Center —

Dishwasher A GE PDWF580PSS UNDER CTR 24 X 34 X 24 NO

Dishwasher B —

Microwave GE ADVANTIUM PSB2201NSS SPEED COOK 30 X 20 NO

MW Trim Kit N/A

Cook top GE PHP900SMSS INDUCTION 30” NO

Wall Oven GE PT916SMSS CONVECTION 30” NO

Freestanding Range — NO

Hood/Blower Unit GE MONOGRAM ZV830SMSS CHIMNEY 30” NO

Trash Compactor —

Main Sink TBD* NO

2nd Sink (kosher) — NO

Prep Sink — NO

END OF LIST

*A 36” cabinet is provided for the sink. Consult manufacturer recommendations when choosing a sink.

Client acknowledges that these are the correct and only appliances that will be incorporated into the kitchen design. Door style

panels for appliances will only be furnished when the door panel column is marked “Yes” for the appropriate appliance. Once a

factory order is placed for cabinetry, we cannot change the design to accommodate different appliances.

Acknowledged: ___________________________________________ Date: __________________

Client Name: ABEL

Model#: PGCS1PJXSS

SEARCH

Shopping Cart | Where To Buy

Select Category

HOME PRODUCTS SERVICE & SUPPORT DESIGN CENTER

GE Profile™ 20.7 Cu. Ft. Refrigerator with Armoire Styling

Features & Photos Product Details Parts & Related Products Product Documentation

Print This Page

Email This Page

Photo Gallery

APPROXIMATE DIMENSIONS (HxDxW)

69 5/8 in x 31 in x 35 3/4 in

CAPACITY

Total Capacity (cubic feet) 20.70 cu ft

Fresh Food Capacity 14.60 cu ft

Freezer Capacity 6.10 cu ft

Shelf Area 23.90 sq ft

FEATURES

Configuration French Door & Double Drawer

Temperature Management System

ClimateKeeper™

Temperature Management Features

TurboCool™ Setting 4 Electronic Sensors Multiflow Air Tower

Defrost Type Frost Free

Control Type 4.3" Color LCD Upfront Electronic Digital Temperature Display

Dispenser External Water

Dispenser Features Door Alarm

Icemaker Factory-Installed

Water Filtration GE Water Filtration 1 Year

Filter Change Indicator Electronic - External

Fresh Food Cabinet Shelves 4

Fresh Food Cabinet Shelf Features

4 Split Adjustable QuickSpace™ Shelf - 1 3 Slide-Out 3 Spill Proof Glass

Fresh Food Door Bins 1 Fixed

Fresh Food Door Features ClearLook™ Bins Gallon Storage 3 Adjustable 1 Fixed

Fresh Food Features Dairy Compartment Snugger Clips - 2

Page 1 of 3PGCS1PJXSS - GE Profile™ 20.7 Cu. Ft. Refrigerator with Armoire Styling - Product ...

This information provided by DCF Fabrication www.StephenWangel.com

Meat Pan Full-Width with Temperature Control

Vegetable / Fruit Crisper(s) 2 Adjustable Humidity

Freezer Storage Basket 3 Sliding (2 Full-Width/1 Split)

Freezer Features GE Reveal® Interior Light

Beverage Feature In-the-Door Can Rack

Exterior Style Free-Standing

Interior Lighting LED

Leveling System 4 Point Front Adjustable

Sweet Spot Shelf Yes

ECONOMICAL / QUIET

Quiet Package Premium Quiet Design

Energy Saver Yes

APPEARANCE

Color Appearance Stainless Steel

Counter-Depth Design Yes

Dispenser Color Color-Matched

Door Stops Yes

Door Style Contoured with Top & Bottom Bevels

Door Swing Hinges on Left & Right

Easy to Remove Door Gaskets Yes

Handle Sculptured Stainless Steel

Textured Steel Case Gray - Galvanized Steel

Adjustable Rollers Front and Rear

WEIGHTS & DIMENSIONS

Approximate Shipping Weight 373.00 lb

Net Weight (lbs.) 343.00 lb

Overall Depth 31 in

Overall Height 69 5/8 in

Overall Width 35 3/4 in

Case Depth Without Door (in.) 23-7/8

Depth with Door Open 90° (in.) 43-1/8

Depth Without Handle (in.) 28-1/2

Height to Top of Case (in.) 69

Width w/Door Open 90 Degrees Incl. Handle (in.)

40-7/8

Back Air Clearances (in.) 1/2

Side Air Clearances (in.) 1/8

Top Air Clearances (in.) 1

POWER / RATINGS

Volts/Hertz/Amps 120V ; 60Hz ; 15A

WARRANTY

Parts Warranty Limited 1-year entire appliance Limited 5-year sealed refrigerating system

Labor Warranty Limited 1-year entire appliance

Page 2 of 3PGCS1PJXSS - GE Profile™ 20.7 Cu. Ft. Refrigerator with Armoire Styling - Product ...

This information provided by DCF Fabrication www.StephenWangel.com

TURBOCOOL ENERGY

SAVER

LIGHT DOOR

ALARM

LOCK

Hold 3 seconds

RESET

FILTER

Hold 3 seconds

to Reset

TEMPERATURE SET

REFRIGERATOR FREEZER

Features and Benefits

• Counter-Depth Design - Offers a built-in look without the built-in expense

• Stainless-Steel Doors with Top & Bottom Bevels - Provides a striking finish and

contoured doors to accentuate kitchen decor

• Two Freezer Drawers - Add convenience by allowing easy access and organization

of frozen foods

• External Water Dispenser with LCD Controls - Offers fresh water and also makes it easy

to monitor all the functions of the refrigerator

• ClimateKeeper™ Temperature Management System - Digital controls and electronic sensors

give you a greater degree of control over food preservation

• LED Lighting - Casts a clean, beautiful light throughout the fresh food area of the refrigerator

• Factory-Installed Icemaker with Water Filtration System - Automatically creates fresh,

filtered ice cubes

• Freshness Center™ - Offers maximum convenience by utilizing two humidity-controlled

drawers and 1 full-length drawer for large storage

• Multi-Level Slide 'n Store™ Basket System - Includes three full-extension baskets

for tremendous storage flexibility and keeps contents perfectly in place

• Condiment Bin and Beverage Rack - Provides convenient storage for canned drinks

and condiments

• QuickSpace™ Shelf - Quickly slides out of the way to make room for tall items

• TurboCool™ Setting - Cools the refrigerator quickly after frequent door openings

• Secure-Close Door System - Securely pulls the door shut, even after you release the handle

• Model PGCS1PJXSS - Stainless Steel

Specification Created 10/07 210862

PGCS1PJX GE Profile™ 20.7 Cu. Ft. French Door Refrigerator with Double Freezer drawers and External Water

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Dimensions and Installation Information (in inches)

Listed by

Underwriters

Laboratories


Ov

era

ll

Dim

en

sio

ns

Height to top of hinge (in.) A 69-5/8

Height to top of case (in.) B 69

Case depth without door (in.) C 23-7/8

Case depth less door handle (in.) D 28-1/2

Case depth with door handle (in.) E 31

Depth with fresh food door open 90° (in.) F 43-1/8

Width (in.) G 35-3/4

Width with door open 90° inc. door handle (in.) H 40-7/8

Air

Cle

ara

nce

s Each side (in.) 1/8

Top (in.) 1

Back (in.) 1/2

PGCS1PJX GE Profile™ 20.7 Cu. Ft. French Door Refrigerator with Double Freezer drawers and External Water

Front View Top View

Model#: PDWF580PSS

SEARCH


Select Category


GE Profile™ Dishwasher with SmartDispense™ Technology


Print This Page

Email This Page

Photo Gallery

Also available in...

White on White PDWF500PWW $1349 ERP

Black on Black PDWF500PBB $1349 ERP

$1449 Est. Retail Price

Current Rebate


34 in x 24 3/4 in x 24 in

FEATURES

ENERGY STAR® Qualified

Yes

Style Built-In

Tub and Door Liner Stainless Steel

Tub Type Tall Tub

Control Type Electronic Light-Touch 12 Touchpads Front Controls

Dishwasher Control Features

Start / Cancel / Reset Pad Last Cycle Memory Child Lock 3 Digit Countdown Display with 5 Cycle Progress Indicator Status Lights Audible End-of-Cycle Signal

Wash System 6-Level BrilliantClean™

Wash System Features

Dual Pumps and Motors Piranha™ Hard Food Disposer Automatic Temperature Control Automatic Temperature Sensing Drain Hose

Sensor CleanSensor™

Wash Arms 3-Direct Feed Lower Middle Upper

Water Filtration System

100% Triple with ExtraFine™ Filter

Dispenser SmartDispense™ II Technology Bulk Detergent Dispenser with Refill Light Rinse Aid with Indicator and Adjustment

Number of Cycles 8

Dishwasher Cycles Normal Wash Anti-Bacteria (NSF Certified) Single Rack Wash

Page 1 of 3 Monday, February 23, 2009PDWF580PSS - GE Profile™ Dishwasher with SmartDis...

This information provided by The Kitchen Loft www.StephenWangel.com

SpeedCycle™ (Wash and Dry) DeepClean™ Hand/Gentle Plastics Rinse Only / Hold

Number of Options 6

Dishwasher Options Delay Start 1-24 Hr. with Countdown Automatic HotStart™ Heated Dry On/Off PreWash Steam PreWash TempBoost

Rack Features ExtraBasket Cutlery Tray 4 Knife Capacity 3 Pearlescent Utility Shelves with StemSafe Upper CleanTip™ Tines 4 Fold-Down Tines with 2 Multi-Position Upper 100% Fold-Down Tines Lower Adaptable Bowl Tines Upper Rack Handle Lower Rack Handle Easy-Glide Roller System 3 Piece Silverware Basket with Cell Covers and Swivel Handle

Racking System Nylon Towerless Pearlescent™ Racks

Number of Place Settings

Up to 16

Upper Rack Removable 4-Position Adjustable Deep Tiered Angled Rack Dry System™ Nylon

Lower Rack Towerless

Dishwasher Drying Features

Multi-Wattage Calrod Heater Convection Dry

Exterior Style Traditional

Latch Squeeze

Leveling System Leveling Screws

Steel Door Yes

ECONOMICAL / QUIET

Quiet Package QuietPower™ 50

Quiet Features Sealed Toe Kick Quiet Water Valve Quiet Detergent Cup Tub Collar Trim Active Vent System

Motor Type QuietPower™ Motor

Outer Wrap Full-wrap Blanket Bitumen

Door Insulation Insulation Bitumen

APPEARANCE


Door Style Long Door

Installation Hard Countertop Ready



Upscale Flush Design

Door Appearance Stainless steel one-piece contour door

Control Panel Color Black


Approximate Shipping Weight

115.00 lb


Overall Height 34 in

Height w/Legs Extended (in.)

35

Overall Depth 24 3/4 in

Overall Width 24 in

POWER / RATINGS

Calrod Heater Watts 875 Max.

Volts/Hertz/Amps 120V ; 60 Hz ; 9.1 A

Ad Designer Submitted

WARRANTY

Parts Warranty Limited 1-year entire appliance Limited 5-year racks/electronic control board Limited lifetime of product tub/door liner

Labor Warranty Limited 1-year entire appliance Limited lifetime of product tub/door liner

Warranty Notes For models produced on or after January 1, 2006 See written warranty for full details

Copyright 2009 General Electric Company

Corporate | Careers | Press Room | Recall Information Accessibility Statement | Contact Us | Site Map Privacy Policy | Terms of Use

Sign up for our e-Newsletter: View current issue

Enter E-Mail Address





Listed by Underwriters Laboratories

2425-1/4 MAX.

21-1/4

4

4 (Adjustable)

33-13/16" MIN.adj. to 35"

27-1/2

22-1/2

Electrical Rating Voltage AC.......................................................... 120 Hertz..................................................................... 60 Total connected load amperage............. 9.1 Calrod® heater watts max......................... 875

For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

PDWF500/580P GE Profile™ Dishwasher with SmartDispense™ Technology

As an ENERGY STAR® partner, GE has determined that this product meets the ENERGY STAR guidelines for energy efficiency.



8.8.8


• SmartDispense™ Technology - Holds up to 47 fl. oz. of detergent and dispenses it based on water hardness and soil levels

• DeepClean™ Cycle with SmartDispense II Technology - Uses SmartDispense II to inject a precise amount of detergent multiple times in the main wash to maximize cleaning power and scrub away hard-to-remove foods

• Steam Pre-Wash Option - Helps to loosen tough soils before any cycle

• Angled Rack Dry™ System - Rack allows dishes to rest at an angle, so water runs off and drying time is reduced

• Four-Position Adjustable Upper Rack - Easy-to-use mechanism allows the upper rack to be moved up, down or diagonally for additional loading flexibility

• Single Rack Wash™ Selection - Perfect for smaller loads or for cleaning glasses only, washing just the upper rack of dishes using less water and energy

• 100% Fold-Down Tines and Adaptable Bowl Tines in Lower Rack - Racks can secure multiple bowls or fold down for additional flexibility

• Model PDWF580PSS - Stainless steel (shown)

• Model PDWF500PWW - White on white

• Model PDWF500PBB - Black on black

PDWF500/580P GE Profile™ Dishwasher with SmartDispense™ Technology

Model#: PSB2201NSS

SEARCH


Select Category


GE Profile Advantium® Wall Oven


Print This Page

Email This Page

Photo Gallery


White PSB2200NWW$2149 ERP

Black PSB2200NBB $2149 ERP


Current Rebate


19 1/32 in x 21 1/2 in x 29 25/32 in

CAPACITY


FEATURES

ENERGY STAR® Qualified No

Control Type Glass Touch Controls; Dial

Cooking Technology Advantium

Microwave Watts (IEC-705) 950.00 W

Cooking Modes Speedcook Microwave Convection Bake Warm/Proof Broil Toast

Style Built-In

Program Cooking Over 175 Pre-Programmed Speed Cook Recipes

Convection Cooking Controls Bake Broil

Advantium® Cooking Controls

Clock Demo Mode Electronic Scrolling Digital Display Help Pad Repeat Last Time Preference Variable Scroll Speed

Microwave Sensor Cooking Controls

Beverage Popcorn Potatoes Reheat Vegetables

Microwave Oven Control Features

Add 30 Seconds Cooking Complete Reminder Cooking Guide Display On/Off

Page 1 of 3 Monday, February 23, 2009PSB2201NSS - GE Profile Advantium® Wall Oven - Pro...


Auto & Time Defrost Clock Custom Recipe Saver Help Pad

Microwave Oven Interior Stainless Steel

Ceramic Pan Yes

Convection Tray Yes

Display On/Off Yes

Express Cook Yes

Grill Pan Yes

Interior Oven Light Yes

Oven Cooking Modes Speed Bake

Rack Type Wire Oven Rack

Reminder (24 hr) Yes

Soften/Melt Yes

Sound Volume Control Yes

Time Cook Yes

Timer (On/Off) Yes

Turntable Yes- 16" diameter

Turntable Size (in.) 16

APPEARANCE


Door Color Black/Stainless Steel

Handle Yes

Oven Door Features Oven Window


Approximate Shipping Weight

87.00 lb

Cabinet Width 30.00 in

Cavity (W x H x D) 20-1/16 x 8-1/2 x 17

Height (Front) (ins.) 21-7/8





POWER / RATINGS

Amps 240V/208V 30

Input Volts/Hertz 240/208V/60Hz


ACCESSORIES

Cookbook Yes

Metal Oven Pan Yes

WARRANTY

Parts Warranty Limited 1-year entire appliance Limited 5-year magnetron tube


Warranty Notes See written warranty for full details

Page 2 of 3 Monday, February 23, 2009PSB2201NSS - GE Profile Advantium® Wall Oven - Pro...



Listed by

Underwriters

Laboratories

PSB2201NSSGE Profile Advantium® 240 Wall Oven

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website atge.com or call GE Answer Center® service, 800.626.2000.

A=Allow 7/8” overlap of oven over bottom and 1/4" overlap at top edges of cutout.B=Allow 2-1/8” for overlap of oven over side edges of cutout.

CabinetWidth(inches)

WWidth

HHeight

DDepth

(excludinghandle)

XCutoutWidth

YCutoutHeight

ZCutoutDepth

(minimum)

PSB2200/1 without accessory drawer 30 29-25/32 19-1/8 21-1/2 25-1/8 17-1/2 23-1/2

PSB2200/1 with accessory drawer 30 29-25/32 22-1/4 21-3/4

25-1/8 to 28-1/2*

21 23-1/2

*For existing cutouts a maximum width of 28-1/2" is acceptable

A=Allow 7/8” overlap of oven over bottom and 1/4" overlap at top edges of cutout.B=Allow 2-1/8” for overlap of oven over side edges of cutout.

Note: Cabinetsinstalled adjacentto wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Note: 2" minimum between cutoutswhen installedabove warming drawer or single wall oven.

Installation Information:Before installing, consult installation instructions packed with product for current dimensional data.


Listed by

Underwriters

Laboratories

PSB2201NSS GE Profile Advantium® 240 Wall Oven


30” 23-1/2”

25-1/8”Min.*

21”

36-3/4”Min.

2” Min.

(3” recommended)

Per warmingdrawerrequirement

ConstructSolid Bottom Min. 3/8”PlywoodSupportedby 2x4 or 2x2Runners all Four Sides

Construct SolidBottom Min.3/8” PlywoodSupported by 2x4 or 2x2Runners all Four Sides

30” 23-1/2”

21”

2” Min.

Per OvenRequirement

45-1/4”Min. Per warming drawer requirement

2” Min.

(3” recommended)

25-1/8”Min.*

Prepare the opening The Advantium 240V can be installed in combination with other GE/Monogram appliances. Always follow each product's Installation Instructions to compete the installation. Single Advantium 240V Installation: Order a 30" wide single oven cabinet or cut the opening in a wall to the dimensions shown.

* For existing cutouts, a maximum width of 28-1/2" is acceptable. If the opening is slightly wider, secure a furring strip on each side of the cutout for securing the oven.

• Always maintain 36-3/4" minimum height from the floor to the cutout in any single or combined installation.

• Allow 3/4" to 2-1/8" case trim overlap on the sides and 7/8" overlap on the bottom of the opening for all models. The amount of overlap on the sides depends on the actual cutout width. Allow 1-1/4" case trim overlap on the top for models PSB2200 and PSB2201 and for models ZSC2200, ZSC2201 and ZSC2202.

• Oven overlaps will conceal cut edges on all sides of the opening.

Prepare the opening (cont.)When installed over a single oven or a warming drawer, allow at least 2" between the two openings. This separation will provide clearance for bottom overlap of the Advantium 240V and the other appliance overlaps.Construct a solid oven floor of 3/8" min. thick plywood supported by 2 x 4 or 2 x 2 runners on all sides.• the support must be level and rigidly

mounted, flush with the bottom edge of the cutout.


Note: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details.

Installation over a GE/Monogram Oven and Warming Drawer:


Note: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details.CAUTION: For personal safety, the mounting surface must be capable of supporting the cabinet load, in addition to the added weight of this approximate 80-pound oven and 30-pound drawer, plus additional oven loads of up to 50 pounds or a total weight of 160 pounds.

30” 23-1/2”

25-1/8”Min.*

21”

ConstructBaseMin. 3/8”PlywoodSupportedby 2x4 or 2x2Runners allFour Sides

36-3/4”Min.

Preparation WITH an Accessory Drawer


PSB2201NSSGE Profile Advantium® 240 Wall Oven

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website atge.com or call GE Answer Center® service, 800.626.2000.


• Speedcook Technology - Cooks up to 8 times faster than a conventional oven

• 4 Ovens in 1 to Meet Your Cooking Needs - Speedcook, True European Convection, Warming/Proofing, Sensor Microwave

• Optimizes cook time for consistent results

• Saves valuable time by eliminating preheating

• 16" Turntable - Allows complete rotation of a 9" x 13" casserole dish

• Over 175 preprogrammed recipes

• Full-width oven rack for multi-level cooking

• Includes speedcooking grill tray for preparing meats

• Model PSB2201NSS - Stainless steel

OVEN MICROWAVECONV

BAKEBROIL

WARMPROOF

SPEEDCOOK

CUSTOMSPEED COOK

EXPRESS

REHEAT

COOK

DEFROST

FAVORITERECIPES

TIMER

HELP

OPTIONS

BACK

POWERTEMP

STARTPAUSE

CLEAROFF

Accessories:

Optional StorageDrawer

Available(JX2201NSS)

Installation Preparation

4

ELECTRICAL REQUIREMENTS

Single Speedcook Installation

Product rating is 120/208 or 120/240 volt, 60 Hz, 30 amps. This product must be connected to a supplycircuit of the proper voltage and frequency andprotected by a time delay fuse or circuit breaker. Power should be supplied from a separate, dedicated30-ampere branch circuit. Wire size must conform tothe requirements of the National Electrical Code or theprevailing local code.

Combined Speedcook and Wall Oven Installation

When installed in combination with a GE/Monogramsingle wall oven, use separate electrical junction boxes.

Refer to single oven installation instructions forelectrical requirements of that product.

These connections must be made by a qualifiedelectrician. All electrical connections must meetNational Electrical Code or prevailing local codes.

Combined Speedcook and Warming DrawerInstallation

When installing the Speedcook oven over a GE orMonogram electric warming drawer, a separate 120V,60Hz, properly grounded receptacle must be installed.See instructions packed with the warming drawer.

WARNING• The electrical power to the oven branch circuit

must be shut off while line connections are beingmade.

• Use copper wiring only.

• Electrical ground is required on this appliance. The free end of the green wire (ground wire) must be connected to a suitable ground. This wire must remain grounded to the oven.

• If cold water pipe is interrupted by plastic, non-metallic gaskets, union connections or otherinsulating materials, DO NOT use for grounding.

• DO NOT ground to a gas pipe.

• DO NOT have a fuse in the NEUTRAL orGROUNDING circuit. A fuse in the NEUTRAL orGROUNDING circuit could result in an electricalshock.

• Check with a qualified electrician if you are indoubt as to whether the appliance is properlygrounded.

Failure to follow these instructions could result inserious injury or death.

INSTALL JUNCTION BOX

The conduit is located at the top right on the back of the oven.

Locate and install the junction box within reach of theoven conduit.

• Through the left or right sides of the cabinet walland into adjacent cabinet.

• Or, through the cutout floor.

• Or, in the upper cabinet.

CutoutHeight


6

Preparation WITHOUT an Accessory Storage Drawer

PREPARE THE OPENING (CONT.)

Installation over a GE/Monogram Oven andWarming Drawer:

NOTE: Additional clearances between the cutoutsmay be required. Check to be sure the ovensupports above the Warming Drawer location donot obstruct the required interior depth and height.See Warming Drawer installation instructions fordetails.

CAUTION: For personal safety, the mountingsurface must be capable of supporting the cabinet load, in addition to the added weight ofthis approximate 80-pound oven, plus additionaloven loads of up to 50 pounds or a total weight of 130 pounds.


30” 23-1/2”

25-1/4”

17-1/2”

2” Min.

Per OvenRequirement

45-1/4”

Min.Per warming drawer requirement

2” Min.

(3” recommended)

PREPARE THE OPENING (CONT.)

Installation over a GE/Monogram Oven:

• If you are replacing a GE/Monogram electricdouble oven with the combined installation of an Advantium 240V and a single oven, use thedimensions shown. The middle rail separating the two openings may need to be larger than the 2” minimum shown.

30” 23-1/2”

25-1/4”

17-1/2” 2” Min.

(3” recommended)

45-1/4”Min.


Per OvenRequirement

9

Installation Instructions

• Remove all packing material and tape.

• Locate parts package containing mounting screws.

• Remove the oven from the carton. Do not lift unit byhandle or conduit. Two people are required to liftthis oven.

• Open the door and remove any packaging in oven.

REMOVE THE PACKAGING AND PARTS1

Owner’s Manual

Owner’s Manual InstallationInstructions

Glass Tray

Metal Grill TrayMetal Trays (2)

Turntable Ring

Bottom Trim

Rack

6 Brass Screws

(3 required, 3 extra)

IMPORTANT: If installing the Advantium 240V Oven with an accessory storage drawer, read the storagedrawer assembly instructions to assemble theproducts together before proceeding to Step 2.

Cook Book

5 Color Matched Screws

(4 required, 1 extra)Cooking Guide

CookingGuide


10

ROUTE CONDUIT THROUGHCUTOUT (CONT.)

When connecting to a 3-conductor branchcircuit:

• Connect oven red lead to branch circuit red lead.

• Connect oven black lead to branch circuit blacklead.

• Connect oven green ground lead and white lead to branch circuit neutral (white or gray).

When connecting to a 4-conductor branchcircuit:

• Connect oven red lead to branch circuit red lead.

• Connect oven black lead to branch circuit blacklead.

• Break connection between oven white lead andoven green ground lead.

• Connect oven white lead to branch circuit neutrallead (white or gray).

• Connect oven green ground lead to branch circuitground lead (green or bare copper).

2ROUTE CONDUIT THROUGHCUTOUT

CAUTION: Two people are required to liftthe oven into the opening. Grasp the bottom atfront and rear. Discard foam base. DO NOT USEHANDLE OR CONDUIT TO LIFT THE OVEN. DAMAGEWILL OCCUR.

With oven in front of the cabinet opening:

• Insert conduit into cabinet opening. Connect ovenwiring and branch circuit.

• Lift the oven into the opening while continuing to feedthe conduit in the direction of the installed junctionbox. Be sure the conduit does not get pinchedbetween the back of the oven and the cabinet wall.

• Leave oven a few inches forward of the cabinetfront frame. Do not push the unit all of the wayinto the cutout.

WARNING• Disconnect power to the junction box before

making the electrical connection.

• Electrical ground is required on this appliance.

• Do not connect the electrical supply untilappliance is permanently grounded.

GROUNDING INSTRUCTIONSThis appliance must be connected to a grounded,metallic, permanent wiring system, or an equipmentgrounding connector should be run with the circuitconductors and connected to the equipmentgrounding terminal or lead on the appliance.

Failure to follow these instructions could result in fire, personal injury or electrical shock.

2

(Oven shown without

accessory storage drawer.)

11


INSTALL BOTTOM TRIM

NOTE: If installing the Advantium 240 Oven with anaccessory storage drawer, the bottom trim is notrequired. Proceed to Step 4.

• Align bottom trim tabs to slots in the bottom of theoven.

• Secure the bottom trim to the bottom of the ovenusing 3 brass screws provided.

3 INSTALL MOUNTING SCREWS

• Slide the oven the remaining way into the openingso that the side flanges and control panel areagainst the cabinet frame. Make sure that the ovenis centered in the opening.

• Open the door, place a turntable tray in the ovenand make sure that the tray in the unit is level.

• Drill pilot holes through the side flanges.

• Drive the color matched screws into the sideflanges. It is recommended that the screws be hand tightened.

If installing oven with an accessory storagedrawer:

• Open the drawer.

• Drill pilot holes through the side flanges.

• Drive color match screws into the side flanges. It is recommended that the screws be handtightened.

4

FINALIZE INSTALLATION

• Turn power on at the source. The interior lightshould come on when the door is opened.

• Refer to Owner’s Manual for operating instructions.

5

Model#: PHP900SMSS

SEARCH

Shopping Cart | Where To Buy | en español

Select Category


GE Profile™ 30" Electric Induction Cooktop


Print This Page

Email This Page

Photo Gallery


Black PHP900DMBB $1849 ERP


Current Rebate


3 1/4 in x 21 3/8 in x 29 3/4 in

FEATURES


Cooktop Surface Glass Ceramic Black Glass Ceramic

Cooktop Burner Type 4 Induction

Style Smoothtop

11" Heating Element 1 (3700 Watts)

6" Heating Element (s) 1 (1800 Watts)

7" Heating Element(s) 2 (2500 Watts)

Control Type Electronic Touch

Cooktop Control Features Child Lock Pan Presence Sensor

Control Location Front Center

Indicator Lights 4 Hot Surface Surface Element "ON"

Kitchen Timer Yes - Minute

Power Cord Length 36"

Page 1 of 2 Tuesday, February 24, 2009PHP900SMSS - GE Profile™ 30" Electric Induction Cooktop - Product Details


Power Level Indicator Digital 7 Segment

APPEARANCE


Frame Color / Material Stainless Steel



Cooktop Size (in.) 30.00 in

Cutout Dimensions (Width x Depth) (In.)

28-1/2 x 19-5/8





POWER / RATINGS

Amp Rating at 208V 40


KW Rating at 208V 5.80


WARRANTY

Parts Warranty Limited 1-year entire appliance



Corporate | Careers | Press Room | Recall Information Accessibility Statement | Contact Us | Site Map Privacy Policy | Terms of Use

Sign up for our e-Newsletter: View current issue

Enter E-Mail Address

Page 2 of 2 Tuesday, February 24, 2009PHP900SMSS - GE Profile™ 30" Electric Induction Cooktop - Product Details



• Induction Elements - Powerful yet precise induction elements generate heat directly to the cookware leaving the unused portion of the element unheated and easier to clean

• 11" Element - Offers a large 11" surface, wide enough to handle bigger pots and pans and accommodate family meals of any size

• 11" Element - At it's highest setting, the 11" element has 3700 watts of power, providing an incredibly fast time to boil water

• Electronic Touch Controls - Offer easy, point-and-cook convenience

• 19 Control Settings - Choose from 19 different power levels to select the temperature that is perfect for your meal

• Pan Presence Sensor - Detects when a burner element is left "on" and automatically shuts it off when not in use

• Control Lock Capability - Provides the ability to lock the cooktop's controls, helping protect from unintended activation

• Seamless Appearance - Installs nearly flush with countertop for a seamless appearance

• Electronic Kitchen Timer - Provides convenient notification to help coordinate meal preparation and cooking times

• Stainless Steel Frame - Brings an added touch of style to any decor and perfectly complements all other stainless steel appliances in the kitchen

• Frameless Design - A smooth and seamless cooktop surface makes cleaning quick and easy

• Model PHP900SMSS - Stainless steel

PHP900SMGE Profile™ 30" Electric Induction Cooktop

220582Specification Revised 9/07


220582

†Note: Check local codes for required breaker size

Important: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 36" flexible armored cable.

Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens and Warming Drawers only. Refer to cooktop and wall oven/ warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Profile™ Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back. In addition, other clearances to the front edge of the countertop must be considered, especially on raised bullnose countertops. Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.


KW Rating

240V 8.6

208V 6.5

Breaker Size

240V 40 Amps†

208V 40 Amps†

Listed by

Underwriters

Laboratories

3-1/4*Cooktop

2-1/2**Required

28-1/2

19-5/8

29-7/8 21-1/2

Electrical junction box 16" MIN. below countertop

30" MIN. tounprotectedcabinet

Cut should not interfere with cabinetstructure at front

1-1/2" MIN.clearance to

side wallfrom cut-out

1-1/2" MIN.clearance to

side wallfrom cut-out

1-3/4" torear wall

13" MAX.depth

* Depth of unit at conduit connection location (rear) is 6-1/2" on models PP980/950 and 4-5/8" on models PHP900/PP975/972/962/945/942/932/912, JP655/356/346.

**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.

15" MIN. to cabinet

PHP900SMGE Profile™ 30" Electric Induction Cooktop


Specification Revised 9/07

3


PRE-INSTALLATION CHECKLIST

BEFORE YOU BEGIN

WARNING – The electrical power tothe cooktop supply line must be shut off whileconnections are being made. Failure to do socould result in serious injury or death.

When preparing cooktop opening, make surethe inside of the cabinet and the cooktop donot interfere with each other. (See section onpreparing the opening.)

Remove packaging materials and literaturepackage from the cooktop before beginninginstallation.

Remove Installation Instructions from theliterature pack and read them carefully beforeyou begin.

Be sure to place all literature, Owner’s Manual,Installations, etc. in a safe place for futurereference.

Make sure you have all the tools andmaterials you need before starting theinstallation of the cooktop.

Your home must provide the adequateelectrical service needed to safely andproperly use your cooktop. (Refer to sectionon electrical requirements.)

When installing your cooktop in your home,make sure all local codes and ordinances arefollowed exactly as stated.

Make sure the wall coverings, countertop andcabinets around the cooktop can withstandheat (up to 200°F) generated by the cooktop.

G

F

E

D

C

B

A

ADVANCE PLANNING

Combination Installations

These cooktops may be installed in combinationwith an approved downdraft vent or a single oven.

Cooktop and a Downdraft Vent

– The countertop must have a deep flat surface to accommodate the combined installation ofthe cooktop and vent.

– Consideration must be given to the separateelectrical supply locations.

– Allow 12″ clearance between the inlet air portson the cooktop bottom toward the rear to anyobstruction.

– Both the cooktop and the vent must be installedaccording to each specific product installationinstruction.

Cooktop with a Single Oven

– Consideration must be given to the separateelectrical requirements and locations.

– Both the cooktop and the oven must be installedaccording to each specific product installationinstruction.

Installation Above Cabinet Drawers

Allow 12″ clearance to combustibles below thecooktop. A drawer directly below the cooktopcannot be used to store items such as towels orpaper products. Use a false drawer front to obtainclearance if necessary.

Before you begin-Read these instructions completely and carefully.

IMPORTANT- Save these instructions for local inspector's use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.

Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.

IMPORTANT- Save these instructions for local inspector's use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.

Note- This appliance must be properly grounded (if applicable).

4


The following MINIMUM clearance dimensionsmust be maintained.

1

PREPARING THE OPENING

OVERALL COOKTOP DIMENSIONS2

Make sure the wall coverings, countertop andcabinets around the cooktop can withstandheat (up to 200°F) generated by the cooktop.

5

CUTOUT DIMENSIONS OF THECOUNTERTOP

To insure accuracy, it is best to make a templatewhen cutting the opening in the counter.

4

13″ MAX. Depth of uprotectedoverhead cabinets

30″ MIN.Clearance fromcountertop tounprotectedoverhead surface

2″ MIN. Clearancefrom cutout to sidewall on the left ofthe unit

15″ MIN. Heightfrom countertop tonearest cabinet oneither side of unit

2″ MIN. Clearancefrom cutout toside wall on theright of the unit

21-3/8″

(21-1/2″ SS) at center

28-1/4″

Cooktop

29-3/4″

(29-7/8″ SS)

19-3/8″

4-5/8“ at frontbaffle

3-1/4” at rear airintake

2-1/2″ Min. from front edge of cutout and front edge ofcountertop

19-5/8″ depth of cutout

28-1/2″

width ofcutout1-3/4″ Min. Between

cutout and the wallbehind the cooktop

Wall coverings,cabinets andcountertop mustwithstand heat up to 200°F.

If a 30″ clearance between the cooking surfaceand overhead combustible materials or metalcabinets cannot be maintained, a minimumclearance of 24″ is required and the underside of the cabinets above the cooktop must beprotected with not less than 1/4″ insulatingmillboard covered with sheet metal not less than 0.0122″ thick.

VERTICAL CLEARANCES (CONT.)

IMPORTANT: To ensure long life of theelectronic components, allow a minimum of12″ free space for air circulation below thecooktop bottom. (Except installation over asingle oven.) The cooktop bottom has airintake ports toward the front that help coolthe components. Do not install a shelf orpartition beneath the cooktop that is morethan 18″ deep.

3

Use a 30” or wider cabinet base.

VERTICAL CLEARANCES

Allow 12” minimum vertical clearance between the cooktop bottom and any combustible surfaces.

3

12″ Min. Vertical Clearance

18″ Max. Deep Shelf

5


INSTALLING OPTION—FOR GE MONOGRAM

MONOGRAM INDUCTION COOKTOPAND MONOGRAM DOWNDRAFT VENTCOMBINATION INSTALLATION ONLY.

The installation of the downdraft vent with this cooktop requires careful consideration. Both the cooktop and the vent must be installedaccording to each specific installation instruction.

BASE CABINET REQUIREMENTS

The combined installation will fit in a standard 24″ deep base cabinet. Use a 30″ or wider basecabinet.

– The vent housing, blower and ductwork willoccupy the base cabinet.

COOKTOP REQUIREMENTS

The countertop must have a deep flat surface toaccommodate the cooktop and vent. Countertopswith a rolled front edge and backsplash will notprovide the flat surface area required.

• Review the illustration to determine the countertopsurface requirements.

– All cutout clearances for this installation must be observed.

22-3/8″

cutoutdepth

19-5/8″

cooktopcutoutdepth

2-3/4″ 1/8″

gap

1-3/4″ min. cooktopcutout to rear verticalcombustible surface

23-1/2″ SS23-3/8″ Black

total flat surfacerequired at center

1-3/4″ min. cutout towall, both sides2-1/2″ min. clearance

to cutout

Front edge of countertop

1-1/32″ cooktop overlap at center

28-1/2″ cooktop and vent area cutout

29-7/8″ SS29-3/4″ Black

3/4"

22-3/4" Inside22" to Support Rail

2-1/2" toCutout 1-7/8"

3/4" Thick Support Rail

20-1/16"

Vent

″

20-3/8″

″

″

″

″

″

6


INSTALLING OPTIONS

COOKTOP INSTALLATION OVER A GE OR GE MONOGRAM SINGLE OVEN

These cooktops may be installed over a singleoven. Both the cooktop and the oven must beinstalled according to each specific installationinstruction.

– Allow 4″ Min. clearance from the top of thecountertop to the top of the oven cutout.

Use a 30″ or wider base cabinet.

• For best appearance, the cooktop should becentered over the oven.

• The baffle on the underside of the cooktop is notnecessary for this combination installation. If thebaffle is attached, remove it.

• This cooktop is only approved to be installed overthe specific models listed on the label of this unit.

POWER SUPPLY

The oven requires a separate, properly grounded 20 Amp, 3-wire 208 or 240 volt, 60 Hz power supply.The cooktop requires a separate 40 Amp, 3-wire, 208 or 240 volt, 60 Hz power supply.

23-1/2″ min.

4″ high toekick

Cooktop 28-1/2″

19-5/8″2-1/2″ min.

1-1/2″ cabinet top

4″ min. 36″

countertopheight

BA

25″

Ovens Dim. A Dim. B

30″ 28-1/2″ min. 27-1/4″ min.28-5/8″ max. 27-5/16″ max.

27″ 25″ min. 27-5/8″ min.25-1/4″ max. 28-1/8″ max.

3/4″ supportplatformrequired

Must support 200 lbs.

Must matchtoekick height

ELECTRICAL CONNECTIONS


7

When connecting to a three-conductor branchcircuit, if local codes permit:

a. Connect the cooktop ground conductor leadto the brach circuit ground using a wire nut.

b. Connect the cooktop red lead to the branchcircuit red lead in accordance with localcodes, using a wire nut.

c. Connect the cooktop black lead to thebranch circuit black lead in accordance withlocal codes, using a wire nut. If the residence red, black or white leads are aluminum conductors, see WARNING.

d. Install Junction Box Cover.

NEW CONSTRUCTION AND BRANCH CIRCUIT CONNECTION

When making the wireconnections, use theentire length of conduitprovided. The conduitmust not be shortened(unless required by localcodes). The conduit lengthis 4 ft. With the cooktop inplace, open the front ofthe cabinet door. Insertthe wires from the conduitthrough the opening ofthe junction box. The conduit strain relief clampmust be securely attached to the junction box andthe flexible conduit must be securely attached tothe clamp.

•When installing in new construction, or

•When installing in a mobile home, or

•When installing in a recreational vehicle, or

•When local codes do not permit groundingthrough neutral:

a. Insert conduit through strain relief and tighten.

b. Attach the appliance grounding lead (green or bare copper) in accordance with local codes. If the residence grounding conductor isaluminum, see WARNING.

Ground Wire

Junction Box Cover

Junction Box Cover

Ground and NeutralWires

WARNING: Improper connectionof aluminum house wiring to copper

leads can result in an electrical hazard orfire. Use only connectors designed forjoining copper to aluminum and follow themanufacturer’s recommended procedureclosely.

THREE-CONDUCTOR BRANCH CIRCUITCONNECTION

Install junction boxso that it can bereached throughthe front of the

cabinet.

16″

Min.

Strain Relief

8

INSTALLING THE COOKTOP


PROTECT SURFACE OF COOKTOPPlace a towel or tablecloth onto the countertop.Lay the cooktop upside down onto the protectedsurface.

1 ATTACH FOAM TAPEApply the foam tape around the outer edge of theglass. Do not overlap the foam tape.

NOTE: On stainless steel models, apply foam tapeon the sides and rear.

3

Bottom of Cooktop

Cloth under Cooktop

Bottom of Cooktop

Foam Tape

CooktopGlass

INSTALL HOLD-DOWN BRACKETSStart one screw through the bracket and into thecooktop. (Both sides.) Do not tighten. Turn thebracket inwards to avoid interference whendropping the cooktop into the countertop.

4INSTALL BAFFLESecure the baffle to the cooktop with screws.

NOTE: Do not install the baffle when the cooktop is installed over a single oven.

2


9

INSERT COOKTOP INTO CUTOUTInsert the cooktop centered into the cutout opening.Make sure the front edge of the countertop isparallel to the cooktop. Make final check that allrequired clearances are met.

5

Cooktop

ATTACH HOLD-DOWN BRACKETSTO CABINET

Open the cabinet door. Install the second screwthrough the bracket and tighten. Then tighten thefirst screw. Install thumbscrew until it touches thebottom of the countertop.

IMPORTANT: Turn the thumbscrew until it touchesthe bottom of the countertop. Do not overtighten.

6

Cooktop Countertop

10


CHECKLISTS

PRE-TEST CHECKLIST

Remove all protective film, if present, and anystickers.

Check to be sure that all wiring is secure andnot pinched or in contact with moving parts.

Check level of appliance.

Check that the cooktop is properly grounded.D

C

B

A

1 OPERATION CHECKLIST

Remove all items from the top of the cooktop surface.

Turn on the power to the cooktop.(Refer to your Owner’s Manual.) Verify that allsurface burners operate properly.

Check that the circuit breaker is not trippednor the house fuse blown.

Check that conduit is securely connected tothe junction box.

See Owner’s Manual for troubleshooting list.

NOTE TO ELECTRICIAN:

The power leads supplied with this appliance areUL recognized for connections to larger gaugehousehold wiring. The insulation of these leads is rated at temperatures much higher than thetemperature rating of household wiring. Thecurrent carrying capacity of a conductor isgoverned by the wire gauge and also thetemperature rating of the insulation around the wire.

NOTE: ALUMINUM WIRING

• WARNING:IMPROPER CONNECTION OF ALUMINUMHOUSE WIRING TO THE COPPER LEADS CANRESULT IN A SERIOUS PROBLEM.

• Splice copper wires to aluminum wiring using special connectors designed and ULapproved for joining copper to aluminumand follow the manufacturer’s recommendedconnector procedure closely.

NOTE: Wire used, location and enclosure ofsplices, etc., must conform to good wiringpractice and local codes.

E

D

C

B

A

2

Model#: PT916SMSS

SEARCH


Select Category


GE Profile™ 30" Built-In Single Convection Wall Oven


Print This Page

Email This Page

Photo Gallery


Bisque on Bisque PT916CMCC $2049 ERP

Black on Black PT916BMBB $2049 ERP

White on White PT916WMWW $2049 ERP


Current Rebate


28 1/4 in x 23 1/2 in x 29 3/4 in

CAPACITY


FEATURES


Configuration Single Oven

Cooking Technology Convection

Cooking System Precise Air™ Convection System

Oven Cleaning Type Self-Clean

Temperature Management System

TrueTemp™ System

Cleaning Time Variable with Delay Clean Option

Automatic Self-Clean Oven Door Lock

Yes

Control Type Glass Touch Controls SmartSet

Oven Cooking Modes Convection Bake Multi/Single Rack Convection Roast Thermal Bake / Thermal Roast

Oven Interior Hidden Bake

Oven Features 6-Pass Broil Element 8-Pass Bake Element Optional Closed Door Broiling

Oven Rack Features 3 Heavy-Duty Self-Clean Oven Racks 7 Embossed Rack Positions

Interior Oven Light 2

Oven Control Features Auto Recipe™ Conversion Convection Conversion Proof Mode Warm Mode Delay Bake Option With Cook & Hold Delay Bake Option With Warm Mode

Page 1 of 3 Monday, February 23, 2009PT916SMSS - GE Profile™ 30" Built-In Single Convectio...


C° or F° Programmable Audible Preheat Signal Auto Oven Shut-Off with Override Electronic Clock & Kitchen Timer Oven Light Pad Start Pad Light Self Clean Mode Certified Sabbath Mode Control Lock Capability Digipad Numeric Entry Variable Broil Optional Clock Display Temperature Display

APPEARANCE


Frameless Oven Door(s) Color-Matched

Oven Door Features Big ClearView™ Oven Window

Handle Sculptured Stainless Steel

Installation Under Cooktop Undercounter Flush Appearance








Cutout Dimensions (w x h x d) (in.)

28-1/2 x 27-1/4 x 23-1/2

Oven Interior Dimensions (W x H x D) (in.)

24 x 17-1/2 x 18-1/4

POWER / RATINGS



Bake Wattage 2100W

Broiler Wattage 2400W

Convection Wattage 2500W



ACCESSORIES

Convection Cookbook / Cooking Guide

Included

WARRANTY




Page 2 of 3 Monday, February 23, 2009PT916SMSS - GE Profile™ 30" Built-In Single Convectio...


13

NOTE: The middle rail separating the twoopenings may need to be larger than the 2”(5.1 cm) minimum shown. Always refer to theindividual installation instructions packed witheach product for specific requirements.

Combined Advantium or MicrowaveOven and Wall Oven Installation:When installed in combination with asingle wall oven, use separate electricaljunction boxes.• Refer to the Advantium or microwave

oven installation instructions for electricalrequirements of that product.

• These connections must be madeby a qualified electrician. All electricalconnections must meet National ElectricalCode or prevailing local codes.

NOTE: Additional clearances may berequired. Check to be sure the ovensupports above the Warming Drawerdo not obstruct the required interior depthand height. The middle rail separating theopenings may need to be larger than the2” (5.1 cm) minimum shown. Always refer tothe individual installation instructions packedwith each product for specific requirements.

Warming Drawer Combined withAdvantium or Microwave Oven andSingle Oven:Install a separate 120V, 60Hz, properlygrounded receptacle. See installationinstructions packed with each productfor specific requirements.

Note: Install theoven only withspecific modelslisted on the labellocated on top ofthe oven.

Cabinetry

Single 30″ (76.2 cm) OvenBelow an Advantium orMicrowave Oven

Single 30″ (76.2 cm) OvenBetween an Advantium orMicrowave Oven and aWarming Drawer

Cutout for 30″ (76.2 cm) Single Ovens only –Below an Advantium or Microwave Ovenor Between an Advantium or MicrowaveOven and a Warming DrawerFor JTP30, JTP70, PT916, PT920, ZET938 models only.

A

2” (5.1 cm) Min.

2” (5.1 cm) Min.

Per Advantium orMicrowave OvenRequirement

Per WarmingDrawerRequirement

2” (5.1 cm) Min.

Per Advantium orMicrowave Oven Requirement

14


Electrical Connections

ATTENTION INSTALLERAll electric wall ovens must be hard wired(direct wired) into an approved junctionbox. A plug and receptacle is NOT permittedon these products.

DO NOT shorten the flexible conduit.The conduit strain relief clamp must besecurely attached to the junction boxand the flexible conduit must be securelyattached to the clamp. If the flexibleconduit will not fit within the clamp, do notinstall the oven until a clamp of the propersize is obtained.

NOTE TO ELECTRICIAN: The 3 powerleads supplied with this appliance areUL recognized for connection to heaviergauge household wiring. The insulationof these 3 leads is rated at temperaturesmuch higher than the temperature ratingof household wiring. The current carryingcapacity of the conductor is governedby the wire gauge and the temperaturerating of the insulation around the wire.

Turn off the circuit breaker or removefuses to the oven branch circuit.

With the oven supported on a table orplatform in front of the cabinet opening,connect the flexible conduit to theelectrical junction box as shown below.Position the conduit in such a mannerthat it will lie on top of the oven ina natural loop when the oven isinstalled. You will need to purchasean appropriate strain relief clamp tocomplete the connection of the conduitto the junction box.

WARNING: Improperconnection of aluminum housewiring to copper leads can

result in an electrical hazard or fire.Use only connectors designed forjoining copper to aluminum and followthe manufacturer’s recommendedprocedure closely.

B2

B1

B

Junction BoxLocation

Strain Relief Clamp(not included)must be used atJunction Box

BARE

GROUND

WHITE

RED

BLACK

Conduit

GROUND

WIRE

Place oven on asupport to assist inconnecting conduit

15


B4 Three-Conductor BranchCircuit Connection

When connecting to a three-conductor branchcircuit, if local codes permit:

a. Connect the bare oven ground conductorwith the crimped neutral (white) lead tothe branch circuit neutral (white or grayin color), using a wire nut.

b. Connect the oven red lead to the branchcircuit red lead in accordance with localcodes, using a wire nut.

c. Connect the oven black lead to the branchcircuit black lead in accordance with localcodes, using a wire nut. If the residencered, black or white leads are aluminumconductors, see WARNING on page 14.

d. Install Junction Box Cover.

B3 New Construction andFour-Conductor BranchCircuit Connection

• When installing in new construction, or

• When installing in a mobile home, or

• When installing in a recreational vehicle, or

• When local codes do not permit groundingthrough neutral:

a. Cut the neutral (white) lead from the crimp.Re-strip the neutral (white) lead to exposethe proper length of conductor.

b. Attach the appliance grounding lead (greenor bare copper) in accordance with localcodes. If the residence grounding conductoris aluminum, see WARNING on page 14.

c. Connect the oven neutral (white) lead tothe branch circuit neutral (white or gray)in accordance with local codes, using awire nut.

d. Connect the oven red lead to the branchcircuit red lead and the oven black lead tothe branch circuit black lead in accordancewith local codes, using wire nuts. If theresidence red, black or white leads arealuminum conductors, see WARNINGon page 14.

e. Install Junction Box Cover.

GroundWire

Junction BoxCover

Junction BoxCover

Ground andNeutral Wires

16

WARNING: Mountingscrews must be used. Failure todo so could result in the oven

falling out of the cabinet causingserious injury.


Securing the Oven in the Opening

Drilling the Pilot Holes andMounting the Oven

a. Drill through the mounting holes (top andbottom) of the side trim, for the #8 screwsprovided.

b. Secure the oven to cabinet with screwsprovided.

NOTE: If the cabinet is particle board, youmust use #8 x 3/4” particle board screws.These may be purchased at any hardwarestore.

Sliding the Oven Into theOpening

a. Loop (do not tie) a 36” (91 cm) stringaround the conduit before the oven is slidinto place. This will keep the conduit fromfalling behind the oven.

b. Lift oven into cabinet cutout using the ovenopening as a grip. Carefully push againstoven front frame. Do not push againstoutside edges.

c. As you slide the oven back, pull the stringso that the conduit will lie on top of theoven in a natural loop.

d. When you are sure the conduit is out of theway, slide the oven 3/4 way back into theopening. Remove the string by pulling onone end of the loop.

NOTE: Before drilling the pilot holes,make sure the oven is pushed as farback into the opening as it will goand centered.

The screws mustbe a minimum of1/4” (6 mm) fromthe front of thecutout.

C

C1 C2

Pull out onstring loopwhile pushingthe oven intothe cabinet

MountingHole

Locations(Hole

Locationsmay vary)

17

a. With oven installed, take the bottom trimand center it on the bottom front edge ofthe cabinet opening.

b. Using the trimas a template,mark the centerof each slot(two total) wherethe mounting holeswill be drilled.

c. Remove the trim.

d. Drill pilot holes intothe center of eachtemplate mark.


Installing the MetalBottom Trim

IMPORTANT: If this unit is everremoved from the cabinet or the ovenis ever pulled out for service, the trimmust be removed first or damage tothe trim will occur.

C4Preparing for the BottomTrim Installation

C3

SideTrim

SideTrim

Metal Lower Trim

* RemoveLower TrimBeforePre-drillingMountingHoles

For 27″ (68.6 cm)models with LowerTrim in Position,Mark (2) MountingHole Locationshere

a. Place the bottom metal trim centered overthe pre-drilled mounting holes. Tape theedges of the trim down to maintain thealignment.

b. Using two trim screws provided, securethe bottom trim to the bottom edge of thecabinet.

For 30″ (76.2 cm)models withLower Trim inPosition, Mark(2) MountingHole Locationshere

Trim Screw Locations for27″ (68.6 cm) models withLower Trim

Trim Screw Locations for30″ (76.2 cm) models withLower Trim

*

18

Lift the oven door byplacing one hand oneach side. The door isheavy, so you may needhelp. Do not lift the doorby the handle.

With the door at the same angle asthe removal position, which is most ofthe way closed, seat the notch of thehinge arm into the bottom edge of thehinge slot. The notch of the hinge armmust be fully seated into the bottomof the slot.

Open the oven door as far as itwill open.

Push the hinge locks up against thefront frame of the oven cavity, to thelocked position.

Close the oven door.


Replacing the Oven DoorD

NOTE: The oven door is heavy. Youmay need help lifting the door highenough to slide it into the hinge slots.Do not lift the door by the handle.

D1

D2

D3

D4

D5

Bottom Edgeof Slot

Hinge Arm

Hinge Notch

Notch of HingeSecurely Fittedinto Bottom ofHinge Slot

Hinge inLocked Position


For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Dimension and installation information are shown in inches.


PT916SM GE Profile™ 30" Built-In Single Convection Wall Oven

KW Rating

240V 4.5

208V 3.4

Breaker Size

240V 20 Amps

208V 20 Amps

Most 30” Wall Cabinets can be used with this unit.

Note: These ovens are not approved for stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.


Side-by-side installations require at least 2" between cutouts.

CL2 x 4 orequivalentrunners

Suitablebracing

to supportrunners

21-5/8"over centerline

of cabinet(must support 275 lbs.)

Cutout width28-1/2'' MIN.28-5/8'' MAX.

29-3/4

C

30

Recommended cutout location

32-1/2" from floor21

Junction boxlocation

Allow minimum of 21'' for clearanceto adjacent corners, drawers, walls, or etc.

A=Allow 1" overlap of oven over top and bottom edges of cutout.B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.C=28-1/4" without trim and 28-3/4" with trim.

Conduit(72" long)

5

27-1/4'' MIN.27-5/16'' MAX.Cutout height

A

B

23-1/2'' MIN.Cutout depth

22'' MIN.

CL2 x 4 orequivalentrunners

Suitablebracing

to supportrunners

21-5/8"over centerline

of cabinet(must support 275 lbs.)

Cutout width28-1/2'' MIN.28-5/8'' MAX.

29-3/4

C

30

Recommended cutout location

32-1/2" from floor21

Junction boxlocation

Allow minimum of 21'' for clearanceto adjacent corners, drawers, walls, or etc.

A=Allow 1" overlap of oven over top and bottom edges of cutout.B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.C=28-1/4" without trim and 28-3/4" with trim.

Conduit(72" long)

5


A

B

23-1/2'' MIN.Cutout depth

22'' MIN.


Optional Undercounter Dimensions and Installation Information

Dimension and installation information are shown in inches.




PT916SM GE Profile™ 30" Built-In Single Convection Wall Oven

Note: 36” ribbon cooktops are approved for use over GE 30” single wall ovens only. 30” ribbon cooktops are approved for use over GE 30” and GE 27” single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data.

Note: CleanDesign or Sealed Burner Gas This installation is to achieve minimum gap between bottom of countertop and control panel. For this installation, the bottom trim will not be flush with a typical 4” toe kick

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.


Power cordfor cooktop

Junction boxfor oven

Junction box inadjacent cabinetfor cooktophook-up

2 (two) 90°elbows &sufficient pipe toconnect in adjacentcabinet

Right cabinet side

3/4" Support

Shut-offvalve

Pressureregulator

1/2" Blackiron pipe

Union

Conduit(72" long)

30" built-inoven

3-1/2" MIN.Free space

4" To 4-1/2"

3-1/4

22

Side View

5-9/16"Reference dim.

for MAX. support height with typical

36" countertopheight

36" TypicalCountertop height

Power cord

Reference5-9/16

30-7/16

Free space

1-1/2" MIN.

1-1/2" Typical countertopSide View

22

27-5/16" MAX.Cutout height

27-1/4" MIN.

Junction box(s) foroven & radiant

cooktop 22" from floor

Add suitable filler to match

adjacent cabinets when needed

to maintain toe kick alignment

30" Oven W/ Rad. Cktp.

5

24

25

Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right.

120 VoltOutlet

Gasconnection

Junction boxlocation240/208V

36'' MIN.

4'' To 4-1/2 '' Toe kick allowable

Match toe kick height front and two sides

22'' MIN. above support platform

Top and/or sidefillers may benecessary if unitis positioned betweenexisting cabinets

28-1/2'' MIN.28-5/8'' MAX.

3/4'' Supportplatform required

23-1/2" MIN.Cutout depth

Allow 11/16''overlap over side edges of cutout

1-1/2"Countertop


With 36" Gas Cooktop With 30" CleanDesign or Sealed Burner Gas Cooktop


PT916SM GE Profile™ 30" Built-In Single Convection Wall Oven Features and Benefits• Glass Touch Controls - Features a smooth glass design that is easy-to-

operate and easy-to-clean

• Precise Air™ Convection System - Provides even air and heat circulation for superior baking and roasting results

• Flat Back Convection - Features a more streamline convection fan that better accommodates baking or roasting pans

• Convection Bake - Delivers ideal airflow throughout the oven cavity, ensuring better baking results

• Convection Roast - Delivers even cooking and consistent results, roasting meats up to 25% faster than a conventional oven

• Hidden Bake Oven Interior - Hides previously exposed bottom element to deliver a clean interior appearance

• Self Clean Oven - Conveniently cleans the oven cavity without need of scrubbing

• Improved Lighting - Positions lamps diagonally across the top of the oven to promote better viewing

• Self-Clean Heavy-Duty Oven Racks - Double coated porcelain-enameled racks no longer require hand cleaning

• Extra-Large Oven Capacity - Provides a large oven interior ideal for cooking more items at once

• Model PT916SMSS – Stainless steel

PT916SM

GE Monogram® 30" Wall-Mounted Vent Hood

M o d e l# : Z V 8 3 0 SM SS

Features & Photos Product Details Parts & Related Products Manuals & Documentation

Print This Page

Email This Page

Photo Gallery

Manuals & Documentation

Requires Adobe® Reader®

Feature Reference Guide

Installation_Instructions

Quick_Specs

Use_and_Care_Manual

CAD Download

FEATURES


Blower Levels 4

Control Type Electronic Pushbutton

Cooktop Lighting 2 Halogen

Damper in Transition Yes

Dual Blowers Yes

Exhaust Options 8" Round Duct

Lighting Levels 4

Recirculating Capable Yes

Removable Filter Yes

Variable Speed Fan Yes

Vertical Exhaust Blower Rating (CFM)

500

Welded / Finished Seams Yes

APPEARANCE


Design Integrated

Exterior Design Chimney - Wall-Mount





Visit your local dealer for pricing.

Page 1 of 2 Tuesday, February 24, 2009ZV830SMSS - GE Monogram® 30" Wall-Mounted Vent Hood - The GE Monogram Collection



Overall Depth 25 in

POWER / RATINGS

Amp Rating at 120V 12.00


ACCESSORIES

8'-10' Ceiling Duct Cover Included

Optional 12' Ceiling Extension ZX83012

WARRANTY




GE.com | Monogram in the News | Recall | Terms of Use | Privacy Policy | Contact Us | Site Map Sign up for the Monogram e-Newsletter:

Page 2 of 2 Tuesday, February 24, 2009ZV830SMSS - GE Monogram® 30" Wall-Mounted Vent Hood - The GE Monogram Collection



ZV830SMGE Monogram® 30" Wall-Mounted Vent Hood


• Stainless Steel Design - Creates a striking architectural impression with bold angles and smoothly finished edges

• Powerful Ventilation - Offers three speeds plus a 500-cfm boost to capture cooking fumes produced by 30" cooktops

• Perimeter Filter System - Draws fumes and vapors around a stainless steel center panel, which completely and stylishly conceals filters

• Halogen Lighting - Provides four levels of clean, brilliant illumination to suit the cooking task or occasion

• Recirculating-Ready Design - Includes reversible duct covers for non-vented installations, eliminating the need for an optional kit

• Model ZV830SMSS - Stainless steel

FAN LIGHT

- + - +

Warranty Information:

• Parts Warranty: Limited 1-year entire appliance

• Labor Warranty: Limited 1-year entire appliance

• Warranty Notes: See written warranty for full details


ZV830SMGE Monogram® 30" Wall-Mounted Vent Hood

*Heightto

Ceiling

29-7/8

5-7/8

13-1/4

10-7/8

18-7/8

*The Supplied Duct Cover Fits 8' to 10' Ceiling Heights.

This vent hood is designed to be installed on a wall and vented to the outdoors, or it can be installed for recirculating operation. All necessary parts for recirculating operation are supplied with the hood. No kits required. Must use an 8" round duct, not supplied with product.

A decorative duct cover is provided to enclose the duct from the top of the hood to a 8' to 10' ceiling.

Accessories: An optional stainless steel duct cover is available for 12' ceiling heights. Order ZX83012 optional duct cover at the same time as the vent hood and have on site before installation.



Listed by

Underwriters

Laboratories

Dimensions and Clearances: The vent hood should be installed 24" min. and 30" max. above the cooking surface. The cooking surface should be at least 36" above the floor. Installation will be easier if the vent hood is installed before the range or cooktop/countertop is installed.

This hood can be installed over a Monogram electric or gas cooktop. It cannot be installed over a Monogram professional cooktop or range.

Installation Information: Before installing, consult installation instructions packed with product or available on monogram.com for current dimensional data. 24” Min.

30” Max.

DUCT FITTINGS

This Hood Must Use an 8″ Round Duct. It Can

Transition to a3-1/4″ x 12″ Duct.

Use this chart to computemaximum permissible lengths forduct runs to outdoors.

NOTE: Do not exceed maximumpermissible equivalent lengths!

Maximum duct length:100 feet for range hoods.

Flexible ducting:

If flexible metal ducting is used, all the equivalent feet values in the table should be doubled. The flexible metal duct should be straight and smooth andextended as much as possible.

DO NOT use flexible plasticducting.

NOTE: Any home ventilationsystem, such as a ventilation hood,may interrupt the proper flow ofcombustion air and exhaustrequired by fireplaces, gasfurnaces, gas water heaters andother naturally vented systems. To minimize the chance ofinterruption of such naturallyvented systems, follow the heating equipment manufacturer’sguidelines and safety standardssuch as those published by NFPAand ASHRAE.

TotalEquivalent Quantity Equivalent

Duct Piece Dimensions Length* Used Length

Round, 1 ft.straight (per foot

length)

3-1/4″ x 12″ 1 ft. straight (per foot

length)

90° elbow17 ft.

45° elbow10 ft.

3-1⁄4″ x 12″

90° elbow 43 ft.

3-1/4″ x 12″

45° elbow 26 ft.

3-1/4″ x 12″

90° flat elbow 102 ft.

8″ round to3-1/4″ x 12″ transition 2 ft.

3-1/4″ x 12″ to 8″

round transition 5 ft.

8″ roundto 3-1/4″ x 12″

transition 90° elbow 6 ft.

3-1/4″ x 12″ to 8″

round transition 90° elbow 13 ft.

Roundwall capwith damper 32 ft.

3-1/4″ x 12″ wall capwith damper 75 ft.

Roundroof cap 44 ft.

5


Total Duct Run

*Actual length of straight duct plus duct fittingequivalent. Equivalent length of duct pieces arebased on actual tests conducted by GE EvaluationEngineering and reflect requirements for goodventing performance with any ventilation hood.

Wall Mount ZV830Installation Heights

Actual *PossibleCeiling *Possible VENTED RECIRCULATINGHeight Installation Height Installation Height

7′ 11″ 24″ 24″

8′ 0″ 24″ to 25″ 24″ to 25″

8′ 1″ 24″ to 26″ 24″ to 26″

8′ 2″ 24″ to 27″ 24″ to 27″

8′ 3″ 24″ to 28″ 24″ to 28″

8′ 4″ 24″ to 29″ 24″ to 29″

8′ 5″ to 9′ 6″ 24″ to 30″ 24″ to 30″

9′ 7″ 25″ to 30″ 24″ to 30″

9′ 8″ 26″ to 30″ 24″ to 30″

9′ 9″ 27″ to 30″ 24″ to 30″

9′ 10″ 28″ to 30″ 24″ to 30″

9′ 11″ 29″ to 30″ 25″ to 30″

10′ 0″ 30″ 26″ to 30″

10′ 1″ 24″ to 30″ 27″ to 30″

10′ 2″ 24″ to 30″ 28″ to 30″

10′ 3″ 24″ to 30″ 29″ to 30″

10′ 4″ 24″ to 30″ 30″

9′ 7″ 24″ 24″ to 30″

9′ 8″ 24″ to 25″ 24″ to 30″

9′ 9″ 24″ to 26″ 24″ to 30″

9′ 10″ 24″ to 27″ 24″ to 30″

9′ 11″ 24″ to 28″ 24″

10′ 0″ 24″ to 29″ 24″ to 25″

10′ 1″ 24″ to 30″ 24″ to 26″

10′ 2″ 24″ to 30″ 24″ to 27″

10′ 3″ 24″ to 30″ 24″ to 28″

10′ 4″ 24″ to 30″ 24″ to 29″

10′ 5″ 24″ to 30″ 24″ to 30″

10′ 6″ to 24″ to 30″ 24″ to 30″

11′ 6″

11′ 7″ 25″ to 30″ 24″ to 30″

11′ 8″ 26″ to 30″ 24″ to 30″

11′ 9″ 27″ to 30″ 24″ to 30″

11′ 10″ 28″ to 30″ 24″ to 30″

11′ 11″ 29″ to 30″ 25″ to 30″

12′ 0″ 30″ 26″ to 30″

*Based on 36″ countertop height.

7

DETERMINE INSTALLATION HEIGHT• Telescopic duct covers are provided to conceal

the ductwork running to the ceiling.

• This hood can be installed for recirculatingoperation. No kits required.

NOTE: Installation height should be measured fromthe cooking surface to the lowest part of the hood.

The vent hood must be installed 24″ min. and 30″ max. above the cooking surface. The hoodinstallation height, from the cooking surface to thebottom of the hood, depends upon ceiling height.


24” Min.30” Max.

36” Min.

ACCESSORIES:

ZX83012 Accessory duct cover is available for 10 ft. to 12 ft. ceilings. This accessory consists of one 487⁄ 8″ long duct cover.

AC

CE

SS

OR

Y Z

X9

00

10

SU

PP

LIE

DA

CC

ES

SO

RY

ZX

83

01

2

CHECK INSTALLATION HARDWARE

Locate the hardware package packed with the hood and check contents.


1 charcoal filter forrecirculating installation

2-piece decorative ductcover (dimension shown

for reference only)

Air deflector forrecirculating

installation only

Duct bracket

Installation Height

Align Bottom Edge WithPencil Line Indicating

Bottom of Hood

REAR WALL MOUNTING TEMPLATE

49

-80

51

4

10

/07

JR

Pri

nte

d in

Me

xico

15-7/16″ 15-7/16″

10-1/16″

CL

1-1/4″1-1/4″

9-7/16″ 9-7/16″

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE

BOTTOM MOUNTING HOLE


NOTE: Topmountingscrews MUSTengage woodsupport.


Installation Height


Bottom of Hood

Wall mount template

8

HARDWARE PACKAGE

Locate and countscrews

6 woodscrews

(#10 1-3/4″ long)

4 wallfasteners

(5/16″)

8 duct cover and air deflector

screws (#8 thread

forming screw3/8″ long)

28-7/8″

13-1/4”

25-1/8″

10-7/8″

Stainless steel filter

9

INSTALL FRAMING FOR HOOD SUPPORT

IMPORTANT — Framing must be capable of supporting 100 lbs.

If drywall is present, mark the screw hole locations forthe top mounting brackets. Remove the template.

• Cut away enough drywall to expose 2 vertical studsat the bracket location indicated on the template.

• Install a horizontal support at least 1″ x 6″

between two wall studs at the mounting screwlocation. The horizontal support must be flush withthe room side of the studs. Use cleats behind bothsides of the support to secure to wall studs.

IMPORTANT: Reinstall drywall for an even mountingsurface.

1

Centerline of InstallationSpace

8" Min. Opening for Ductwork

View From Rear

Cleats

1" x 6" Min.MountingSupport


Centerline ofinstallation

space

View from rearcleats

1” x 6” min.mounting support

DUCTWORK, WIRING LOCATIONS

Determine the exact location of the vent hood.

• Locate the template packed with the literature.– Measure 36″ from the floor to the top of the cooking

surface. Add hood installation height determined on page 7. Mark that location.

– Use a level to draw a straight pencil line on the wall.

– Tape the template in position along the penciled line. CHECK TO BE SURE THE TEMPLATE IS LEVEL.

Ceiling ducting:

If ductwork will vent straight up to the ceiling:

• Use a level to draw a line straight up, from the centerline on the template to the ceiling.

• Measure 5-1/2″ from the back wall to the centerline of an 8-1/2″ hole on the ceiling.

NOTE: If drywall is not present, add drywall thickness to the 5-1/2″ dimension.

Wall Ducting:

If ductwork will vent to the rear:

• Use a level to draw a line straight up from the centerline on the template.

• Measure at least 27-3/4″ above the pencil line that indicates the bottom installation height, to thecenterline of an 8-1/2″ dia. duct hole. (Hole may be elongated for duct elbow.)

HOUSE WIRING LOCATION:

• The junction box is located on the top left side of the hood.

• Wiring should enter the back wall at least 18″ abovethe bottom of the hood, and within 5-1/2″ of the leftside of the centerline.

INSTALLATION—VENTED TO THE OUTSIDE

8-1/2” min. opening for ductwork

Installation Height


Bottom of Hood


49

-80

51

4

10

/07

JR

Pri

nte

d in

Me

xico

15-7/16″ 15-7/16″

10-1/16″

CL

1-1/4″1-1/4″

9-7/16″ 9-7/16″

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE





Installation Height


Bottom of Hood

CeilingHouse WiringLocation C

L

5-1/2”

18”Min.

Wall vent27-3/4” min.

aboveinstallation

height

5-1/2” centerline to wall FOR CEILING VENT DUCTING

8-1/2” dia. hole


INSTALL DUCT BRACKET

The duct bracket should be installed against the back wall and flush with the ceiling. This bracket will hold the duct coverin place at the top.

Secure the bracket to the wall:

• Align the diamond centerline cutout on the bracket with the penciled centerline on the wall.

• Mark 2 screw hole locations in the wall.

• Drill 1/8″ pilot holes in the marked locations.

• If pilot holes do not enter wood studs, enlarge the holes to 3/8″ and install metal wall fastener anchors (provided).

• If mounting directly to a masonry wall, obtain appropriate#10 masonry screw anchors. Drill and install per thefastener supplier’s instructions.

• Drive screws, by hand, into the fasteners to allow anchors to expand. Remove the screws.

• Secure the bracket to the wall with wood screws and/or fasteners.

3

INSTALL HOOD MOUNTING SCREWS

The two upper mounting screws must enter the horizontalsupport or wall studs.

• With the template taped in place, use a punch to markmounting bracket screw locations.

• Drill 1/8″ pilot holes in 2 of the punched locations in the lower bracket.

• Remove the template.

• Install the mounting screws, leave 1/4″ gap between the screw head and the wall. This will allow the keyhole sloton the hood frame to engage the screw head.

IMPORTANT: Use the mounting screws provided. DO NOT USEDRYWALL SCREWS.

• Check to be sure the mounting screws arehorizontally level.

2

Installation Height


Bottom of Hood


49

-80

51

4

10

/07

JR

Pri

nte

d in

Me

xico

15-7/16″ 15-7/16″

10-1/16″

CL

1-1/4″1-1/4″

9-7/16″ 9-7/16″

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE

TOP MOUNTING HOLE

DRILL 1/8″

PILOT HOLE





Installation Height


Bottom of Hood


Centerline cutout

MOUNT THE HOOD

WARNING: 2 people are required to lift and positionthe hood onto the mounting screws.

• Lift the hood onto the mounting screws.

• Check level and mark bottom screw locations.

• Remove the hood.

• Drill 1/8″ pilot holes in the marked location.

• If pilot holes do not enter studs, enlarge the holes to 3/8″

and install metal wall fastener anchors (provided).

• Lift the hood onto the mounting screws.

• Install lower screws to pull the hood tight against the wall.

• Tighten the top mounting screws.

4

Tightenscrews

Installscrews

10

11



CONNECT DUCTWORK

• Remove shipping tape from the damper.

• Install ductwork, making connections in thedirection of airflow as illustrated.

• Push duct over the exhaust outlet and damper.

• Secure joints in ductwork with sheet metal screws.

• Wrap all duct joints and the flange connectionswith duct tape for an airtight seal.

CAUTION: Do not use sheet metal screws at the hood flange connection. Doing so will preventproper damper operation. Seal connection with tape only.

5

Duct tapeover seamand screw

Screw

Airflow



CONNECT ELECTRICAL

Verify that power is turned off at the source.

WARNING: If house wiring is not 2-wire with a ground wire, a ground must be provided bythe installer. When house wiring is aluminum, besure to use U.L. approved anti-oxidant compoundand aluminum-to-copper connectors.

• Remove the 6 screws on the junction box cover and the knockout on the top or left side.

• Secure the house wiring to the junction box with a strain relief.

• Connect the white lead to the branch circuit white lead.

• Connect the black lead to the branch circuit black lead.

• Connect the green/yellow lead to the branchcircuit green lead or bare ground lead.

• Secure all the connections with wire nuts on eachelectrical connector.

• Push the wires into the junction box and replace the cover. Be sure the wires are not pinched.

• Secure the junction box cover with the 6 originalscrews.

6 INSTALL DUCT COVERS

• Remove protective plasticcovering.

• Place the decorative ductcovers on top of the hood.

NOTE: The inside duct piecehas vent holes on one end.The holes are intended foruse when the hood isinstalled for recirculating purposes. Slide the insideend into the outer piece; the vent holes should notbe visible in this installation.

The inside duct piece must slip into the folded endsof the outer section.

• Extend the inner duct upward to the ceilingbracket.

• Press up on the front corners of the filter cover panelto unlock. Lower the panel to access the filter.

• Locate the screw holes on the inside front edge of the opening. Install 2 screws to secure the ductcover to the hood.

7

Mountingscrews

Lower ductcover seat

Duct coversupport bracket

Lower ductcover

Upperduct cover

Duct attachmenttabs

Screw holes

Junctionbox cover

12



INSTALL FILTERS

IMPORTANT: Check to be sure that the main ON/OFFswitch next to the motor is in the ON position.

• Remove protective films on the grease filters andfilter cover panel.

NOTE: The charcoal filter is not required for thisinstallation.

• Tip the filter into the left or right side of the opening. Lift the filter to the opposite side and into the filter lock.

• To remove the filter, push the latch toward the center and pull downward.

• To close the filter cover panel, push up on bothsides at the front corners to engage the latch.

8 FINALIZE INSTALLATION

• Check to be sure all tape and packaging materialshave been removed.

• Refer to the Owner’s Manual for operatinginstructions.

9

Push-buttonswitch

(horizontal view from

inside opening)

13

Documents

The Kitchen Loft - STEPHENWANGELstephenwangel.com/images/CONTRACTOR/ABEL_APPL.pdf · PDWF580PSS - GE Profile™ Dishwasher with SmartDis... Page 2 of 3 Monday, February 23, 2009 This