The International Electrotechnical Commission is the leading global organization that publishes consensus-based International Standards and manages conformity

IEC TC21 Committee for Secondary Cells and Batteries

needs your expertise to write the standard

IEC 61427-2 Ed.1 Secondary cells and batteries for renewable energy storage

Part 2: On-grid applications

• The International Electrotechnical Commission is the leading global organization that publishes consensus-based International Standards and manages conformity assessment systems for electric and electronic products, systems and services, collectively known as electrotechnology ( www.iec.ch )

• IEC TC21 and its SC21A, is one of the 174 TCs (Technical Committees) and SCs (Subcommittees), and about 700 Project Teams (PT) / Maintenance Teams (MT) which carries out the standards work of the IEC. The working groups are composed of people from all around the world who are experts in electrotechnology. The great majority of them come from industry, while others from commerce, government, test laboratories, research laboratories, academia and consumer groups also contribute to the work

• TC21 and SC21A is supported by 25 National Committees and has the task to prepare product standards for all secondary cells and batteries, irrespective of type or application. All electrochemical systems are considered.

http://www.iec.ch/cgi-bin/getfile.pl/sps_21.pdf?dir=sps&format=pdf&type=&file=21.pdf

http://www.iec.ch/




Level mountains

Fill valleys

Even fields

BESS

IEC TC21 Committee for Secondary cells and batterieshas received, with document IEC 21/767/RVN dated 2011-10-28, the go-ahead to develop a standard for Electrical Energy Storage in Batteries

• Covering rechargeable batteries of any chemistry

• In the energy range of 10KWh to 10MWh

• For residential and industrial use

• For peak power shaving, demand time shifting, load leveling and similar applications

• Receiving energy directly from renewable energy sources or from AC power grid

• Supplying power to the AC grid or DC loads

• The standard will define methods of test and requirements in a end-user oriented black box storage battery approach

• It will cover safe operation, performance and endurance of commercially available candidate batteries

• System safety issues (building codes etc.) are of national resort and will NOT be addressed in this international IEC standard

IEC 61427-2 Ed.1 Secondary cells and batteries for renewable energy storage Part 2: On-grid applications

EES End-user community Pb-

acid

NiMH

NiCd

NaS

NaNiCl

Li Ion

V3+/V5+

Li Pol

IEC 61427-2 Battery chemistries

The working group intends to complement its group of experts in such a way that all commercially available secondary battery system chemistries are represented by at least two technical experts in their field. Experts from electrical energy equipment manufacturers, energy producers and users are also invited so to provide the necessary customer point-of-view input in this standards.

You would be asked to provide supporting technical data and comments in your field of expertise and relating to the definition of the test and requirement clauses to be formulated and then review critically drafts of the standard text.Most of the exchange will occur via collaborative tools but you will be asked to assist to at least a yearly, two-day working group meeting during which important technical issues will be reviewed and decided.


• How can you contribute in this activity?

• How will you benefit from this ?


You want to access global markets and build products that are accepted worldwide. You want to influence the nature of technology and product development. You want to make money, reduce cost and save time.Don’t let others decide to which rules you will need to play, sit at the table where those global product specifications are written and thus assure that the electrochemical system your company is promoting, is getting adequate attention in the test and requirement clauses of the standard.

You may be further interested - To establish a level playing field for all- Help set standards that other competitors have to equal- Facilitate trade and new market development- Know about and influence product requirements- Improve productivity and save money- Get to know what other companies are doing in the field- Benefit from the technical and professional interaction with others


• What is the timetable?

Committee draft

versions

• 1Q and 3Q 2012• WG meeting

Committee draft for

vote

• 4Q 2012• WG meeting

Final draft of international

standard

• 3Q 2013• WG meeting

IEC 61427-2

The timing for establishing the standard is governed by the industriousness of the working group and the IEC mandated approval and voting periods

2014

INTERNATIONAL ELECTROTECHNICAL COMMISSION

Secondary Cells and Batteries for Renewable Energy Storage and Smart Grid Structures General Requirements

and Methods of Test

Part 2: On-grid applications

1 Scope

This International Standard gives information relating to secondary batteries used in Electrical Energy Storage

(EES) and the associated methods of test used for the verification of their safe operation, performance and

endurance. This part 2 deals with cells and batteries used in on-grid applications and is battery chemistry

agnostic.

This International Standard is system operator oriented so that suitable battery based residential and industrial

installations of EES systems can be identified, selected, operated and recycled properly.

All EES batteries have to achieve safe operation conditions. The performance and endurance requirements are

application related and tied to the specific EES use and the associated economic constraints. The requirements

for performance and endurance are thus essentially application case related and to be formulated by the end-

user.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced document

(including any amendments) applies.

3 Terms and definitions

For the purpose of this document, the definitions and terms for secondary cells and batteries given in IEC

60050-482 and associated dictionaries

Proposed 61427-2 standard clauses

4 General test conditions

4.1 Accuracy of measuring instruments

5 Test methods

5.1 Safe operation

5.1.1 Emission of gases, liquids or aerosols during operation or storage

5.1.2 Reaction in an event of a short circuit at the terminals of the battery

5.1.3 Reaction in an event of over-discharge of the battery

5.1.4 Reaction in an event of over-charge of the battery

5.1.5 Reaction in an event of battery management controls failure

5.1.6 Reaction in an event of seismic loading, water flooding or fire involving the battery itself

5.1.7 Spent battery material declaration and recycling issues

5.1.8 Any other safe operation topic


5.2 Performance

5.2.1 Battery voltage vs. load current correlation over its entire permissible load window

5.2.2 Battery charge efficiency

5.2.3 Battery discharge efficiency

5.2.4 Battery heat emission during charge

5.2.5 Battery heat emission during discharge

5.2.6 Battery capacity loss and maintenance during idle periods or storage

5.2.7 Battery subsystems fluids, power and footprint requirements

5.2.8 Any other battery performance topic


5.3 Endurance

5.3.1 Battery service life determination under a very high rate, short duration (<15m) cyclic charge-

discharge service to be expected in grid frequency control applications

5.3.2 Battery service life determination under a moderate rate, medium duration (<3h) charge-

discharge service to be expected in load shifting and load levelling applications

5.3.3 Battery service life determination under a low rate, long duration (>8h) cyclic charge-discharge

service to be expected in seasonal energy storage applications

5.3.4 Battery service life determination under a PSOC, cyclic charge- discharge service to be expected

in wind energy storage applications

5.3.5 Any other battery endurance topic


• We welcome you to our working group!

Please give us the following details

• Title• Name• Affiliation/Company• Postal address• E-mail address• Your field of experience relating to the proposed standard IEC 61427-2

Send to: [email protected]

mailto:[email protected]

• Contacts and further information

TC21 WG 3 Convener Herbert GiessSwiss NC

TK21

[email protected]

www.herbert-giess.ch

TC21 Secretary Yves Boudouyboudou

@ignes.fr

TC 21 Chairman Friedrich Kramm

[email protected]


http://www.herbert-giess.ch/







Documents

The International Electrotechnical Commission is the leading global organization that publishes consensus-based International Standards and manages conformity