products for laboratory and science furniture

Well functioning water flows are essential in every laboratory.

Are you looking for products which are easy  to implement in your furniture and which will  make laboratory workers enthousiastic?

Labstream® offers you a range of products which will provide this. They fit well in a modern,  flexible and durable laboratory environment.

Labstream® products are characterised by the following features:

•   installation and dismounting can be done within a few minutes

•  made of durable, acid- resistant plastics•  easy to clean•   suitable for application in almost all types of 

laboratories

Easy, all the way!

www.labstream.com

42-3232P 320x320x200mm42-4030 400x300x250mm42-4040P 400x400x250mm42-4545 450x450x250mm42-5040P 500x400x250mm42-6045 600x450x250mm

Polypropylene sinks, suitable for drop-on as well as for undermount installation.Supplied inclusive strainer and 1 ½” waste connection.

Available as option:- fixing set for drop-on installation- standpipe- overflow assembly

Kappa (-Plus) sinks

42-3085 300x85x140mm42-4010 400x100x150mm42-2525 250x250x200mm42-3015 300x160x230mm

Polypropylene sinks, suitable for undermount installation.Supplied inclusive strainer and 1 ½” waste connection

Available as option:- standpipe

Gamma sinks

42-1347G  suspension sink42-6030  service-unit sink 600x300mm 41-6161G  service-unit sink 610x610mm

Polypropylene sinks, suitable for wall-mount / drop-on installation on service units.Supplied inclusive strainer and 1 ½” waste connection

Available as option:- standpipe- wall brackets (for 42-1347G)

Special sinks

colour: light grey

several colours available

several colours available

42-497  small oval drip cup 150x70mm42-298  large oval drip cup 230x75mm42-501 small round drup cup ø80mm42-500 large round drip cup ø140mm

Polypropylene drip cups, suitable for drop-in as well as for undermount installation.Supplied inclusive fixed strainer, 1 ½” waste connection, washer and nut

Available as option:- bracket for drop-in installation

Drip cups

50-0850  ø 320mm, capacity 6,5 litre50-0900  ø 400mm, capacity 18 litre

Polypropylene separators, for installation under or near a sink.Supplied inclusive integrated water seal and 2 quick-connect couplings ø 50mm

Available as option:- stainless steel support with castors

Separators for sediments

50-0040 ø 400mm

Polypropylene neutralisation unit, for installation under or near a sink.Supplied inclusive fixed support with castors, integrated water seal and 1 ½” connections.

Available as option:- 12,5 kg neutralisation grains (for 1 filling)

Neutralisation unit

several colours available

50-402 dilution trap with glass base, 2,3 litre

50-226   dilution combination trap,  4,5 litre

HDPE diluton traps50-402 with heat resistant glass base for visual inspec-tion. Connection 1 ½” x 50mm50-226 for combining up to 3 inlets to 1 outlet. Connec-tions 1 ½”

Dilution traps

52-205  inlet 1 ½”, outlet ø50mm52-250  inlet ø50mm, outlet ø50mm 52-253  inlet ø40mm, outlet ø50mm

Polypropylene universal S/P traps. Outlet can be turned in horizontal as well in vertical position.

Universal traps

52-201  inlet 1 ½”, outlet ø40mm52-202  same, with clear base52-203  inlet 1 ½”, outlet 1 ½” mech.52-204  same, with clear base

Polypropylene bottle traps with adjustable inlet height. Bottle traps

colour: light grey

52-252     waste connection 1 ½”x ø40mm52-251     waste connection 1 ½”x ø50mm52-240     adapter 1 ½” x 1 ½” mech.52-214 straight coupling ø40mm52-215 straight coupling ø50mm52-217 t-piece ø40mm52-218 t-piece ø50mm52-211 elbow ø40mm52-212 elbow ø50mm

Polypropylene hand tightening connection fittings.  Fittings

52-208    waste fitting 1½”, ø70x55mm52-209    waste fitting 1½”, ø85x110mm52-221/316 waste fitting 1 ½” with overflow51-210 standpipe 210mm51-113 standpipe 460mm

Polypropylene waste fittings and matching standpipes.Waste fitting with overflow 52-221/316 comes with stain-less steel 316 flange.Waste fittings inclusive rubber seals and nut.Standpipes match with waste fittings 52-208 and 52-209

Waste fittings and standpipes

51-4350G 600 x 450mm51-4351G 900 x 450mm51-4352G 1200 x 450mm

Polypropylene pegboards suitable for wall mount instal-lation.Inclusive drip channel, waste and drain hose.

Pegboards

For more information, please send an e-mail to:info@labstream.nl

or contact:Steendam lab furnishing suppliesLichterweg 318042 PW ZwolleThe NetherlandsTel. +31- (0)38- 421 55 22

Labstream: Easy all the way!

Labstream® products match well with all types of furniture and can be installed easily and efficiently.

This will reduce the costs of installation and minimizes risk of delays during the project phase.

Labstream® products are easy:•  to produce   production of thermoplastic products requires less energy compared 

to many other materials•  to implement        drawings and specifications are online available at www.labstream.eu•  to ship  lightweight, stackable (at least 48 sinks on a standard pallet)•  to install  installation can be done within a few minutes by anyone•  in use  friendly for glassware, chemical resistant•  to clean  easy to clean with standard cleaning agents•  to (re)move  lightweight and dismountable•  to discharge   the different used raw materials can be separated easily and 

are recyclable

Labstream® is a brand name of Steendam lab furnishing supplies.

www.labstream.com