Product NewsTHE DRAG SPECIALTIES DECEMBER 2020

1 +49 (0) 6501 96 95 -2000 • partseurope.eu

THE RIPPER SHORT ROAD RAGE 2-INTO-1 EXHAUST SYSTEM• Designed with a louder, more aggressive tone than

the Shorty Road Rage exhaust systems• Stepped 13/4” to 17/8” headpipes• Fully welded one-piece design• 10” megaphone muffler with a removable louvered

baffle that measures 10” x 2.25”• Mild steel construction and full heat shields on chrome

and black; stainless system has partial heat shields• 18 mm O2 bungs with 12 mm adapters

BLACK 21/4” FISHTAIL SLIP-ON MUFFLERS• Slip-on mufflers feature 16-gauge steel construction• Unique style, performance and an

aggressive exhaust note• Mount to stock headpipes or Bassani headpipes• Available in 33” or 36” lengths,

with or without baffles• Include all necessary hardware• Sold in pairs

PART # DESCRIPTIONFOR 99‑16 FLT/ FLHT/ FLHR/ FLTR/ FLHX1801‑1466 33” mufflers w/o baffles1801‑1467 36” mufflers w/o baffles

PART # DESCRIPTIONFOR 99‑16 FLT/ FLHT/ FLHR/ FLTR/ FLHX (CONT)1801‑1468 33” mufflers w/ baffles1801‑1469 36” mufflers w/ baffles

PART # DESCRIPTION1800‑2499 Chrome

PART # DESCRIPTION1800‑2500 Black

PART # DESCRIPTION1800‑2501 Stainless steel

FOR 06‑17 FXD/ FXDWG W/ MID CONTROLS OR FORWARD CONTROLS

1801‑1466

1800‑2499

1800‑2501

1800‑2500

2 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

PART # DESCRIPTION4405‑0693 For 14‑20 FLHTCU/ FLHX/ FLHTK/ FLHTCUTG

PART # DESCRIPTION4405‑0695 For 15‑20 FLTRX/ FLTRXS

ROKKER® XXR EXTEREME 400W 2-SPEAKER/ AMPLIFIER KITS• Includes a full range class D amplifier with two

channels spec’d at 200W each for a total of 400Ws• Requires no special flashing• Specially tuned for optimal quality even at highway speeds• Amplifier measures 18,5 cm x 12 cm x

44 mm (71/4” X 43/4” X 13/4”)• Includes two 17 cm (6.71”) speakers designed as direct

replacements for OEM 16,5 cm (6.5”) speakers• Waterproof woven fiber drive-cone

and neodymium magnet core• Speakers spec’d at 2 ohms with a 300W max input

ROKKER® 400W AMPLIFIER KITS• Full-range Class D amplifier with a 2 ohm load• Two channels spec’d at 200W each• Plug-n-play wiring• Amplifier settings optimized for clarity and volume while on the highway• Amplifier measures 18,5 cm x 12 cm x 44 mm (71/4” X 43/4” X 13/4”)

PART # DESCRIPTION4405‑0690 For 15‑20 FLTRSE/ FLTRX/ FLTRXS4405‑0689 For 06‑13 FLTR/ FLTRSE/ FLTRX/ FLTRXS

4405‑0695

4405‑06894405‑0690

4405‑0693

3 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

STAGE-5 ROKKER® XXR 400W SPEAKER/ AMP KITS• 2-channel Rokker XXR amplifier rated at 200W each for a total of 400W• Specially tuned amplifier for best highway sound and performance• No special flashing required• Amp measures 18,5 cm x 12 cm x 44 mm (71/4” x 43/4” x 13/4”) • Plug-and-play installation• Includes two 17 cm (6,71”) Rokker XXR speakers with

woven fiber cones and neodymium magnets

ROKKER® XXR 400W BLUETOOTH® CONTROLLED AMPLIFIER KIT• Full range class D amplifier• 2-channels spec’d at 200 watts for a total of 400W• Bluetooth controller syncs to your smartphone and mounts to your handlebar• Controller is weatherproof and allows for volume and music selection functions• Amplifier measures 18,5 cm x 12 cm x 44 mm (71/4” X 43/4” X 13/4”)

STAGE-5 ROKKER® XXR 400W 2-CH AMPLIFIER• 2-channel amplifier rated at 200 watts each for a total of 400 watts• Custom-tuned for optimal sound quality even at highway speeds• Plug-and-play installation• Includes custom-made stainless steel bracket system• Amplifier measures 18,5 cm x 12 cm x 44 mm (71/4” X 43/4” X 13/4”)

4405‑06914405‑0688

4405‑06944405‑0696

PART # DESCRIPTION4405‑0694 For 14‑20 FLHTCU/ FLHTCUL/ FLHX/ FLHTCUTG

PART # DESCRIPTION4405‑0696 For 15‑20 FLTRX/ FLTRSE/ FLTRXS

PART # DESCRIPTION4405‑0692 For 99‑20 FLHR

PART # DESCRIPTION4405‑0688 For 14‑20 FLHX/ FLHXS4405‑0691 For 15‑20 FLTRX/ FLTRXS

4 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

SADDLEMENSpecializing in gel motorcycle seats and motorcycle luggage since 1987, Saddlemen puts more than 30 years of industry and real-world riding experience into every product. They are constantly bringing new seats to the market for the latest V-Twin models. They continue to expand their custom seat offerings for the latest Softail models. Want great style and long-haul comfort? Switch up to a Saddlemen seat for your ride.

STEP-UP SEATS• Saddlemen has collaborated with top freestyle performers to create the

new T-sport-inspired step-up lattice stitch (LS) or tuck-n’-roll (TR) seats• LS seats infuse old-school lattice stitch retro styling with a modern twist• TR seats feature true tuck-n’-roll styling• High lumbar keeps the rider locked into the seat• Features Saddlemen’s Ultra-Foam, which is formulated

to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology

• Black or brown whisper-grain SaddleHyde™ covers• Installs easily with all necessary mounting

hardware and instructions included

GRIPPER STEP-UP SEAT• Blends rider and passenger comfort with

the ergonomics required to keep the rider locked in place and in control of the bike

• Combines a GelCore™ interior with Ultra-Foam to create a perfect balance of rigidity and user compliance

• The Ultra-Foam’s unique molding process creates an element-resistant, self-skinning process that seals the foam from water and enhances the seat’s durability as well as comfort

• Gripper lumbar will stick you to the seat• All mounting hardware and instructions are included for easy installation• Available with a black SaddleHyde™ cover with black stitching

SECURITY SEAT SCREWS• Secures the seat to the bike with

a Torx security screw• 1/4 x 20 thread• Tab cover and screw tool included• Sold each

0802‑1398

0802‑1399

0802‑1401

0802‑1405

0802‑1407

0820‑0154 0820‑01550820‑0153

PART # DESCRIPTIONBROWN0802‑1405 Full LS0802‑1400 Front LS0802‑1402 Rear LS0802‑1407 Front TR, rear LS

PART # DESCRIPTIONBLACK0802‑1404 Full LS0802‑1399 Front LS0802‑1401 Rear LS0802‑1398 TR0802‑1406 Front TR, rear LS

FOR 18‑20 FLDE/ FLHC/ FLHCS/ FLSL

PART # DESCRIPTION0802‑1403 For 18‑20 FLDE/ FLHC/ FLHCS/ FLSL

PART # DESCRIPTION0820‑0153 Black0820‑0154 Chrome0820‑0155 Gold

5 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

EXTENDED REACH DOMINATOR SEAT AND PILLION PAD• Hybrid seat design combines GelCore™ interior, progressive-density

foam and a Gel Channel™-design cover to provide Harley-Davidson® riders with unparalleled comfort, control and a modern style

• Gel Channel (GC) center channel relieves seating pressure on the perineal area to increase blood flow, thus keeping the rider comfortable in the saddle for a longer time

• In addition to pressure relief, the GC-style center of the seat provides an airflow passage• Extended reach design extends the driver’s seating area a

full 51 mm (2”) from the stock seating position• The rugged carbon fiber weave and smooth vinyl cover holds

up to hard use and still retains its good looks• Cover is constructed with durable SaddleHyde™ that resists water and cold-cracking• Using a very large gel pad for additional foam support and vibration damping,

the seat offers the comfort levels normally found in larger touring seats• Marine-grade fiberglass pans and chrome brackets make

sure the seat is durable for decades of riding• Easy to install; additional mounting hardware as needed• The matching optional pillion pad also features gel and the same GC-design plus a

shape fuller than conventional pillion pads for longer rides in great comfort

PREDATOR III 2-UP SEATS• High-quality automotive-grade vinyl cover• 08-20 models have 16,5 cm (61/2”) tall

driver support with unique styling• 99-07 models have 17 cm (63/4”) tall driver

support with unique styling• Molded polyurethane foam for maximum comfort and styling• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit, with

a carpeted bottom and rubber bumpers to protect paint• Fits with all Drag and most H-D sissy bars• Includes all mounting hardwareNOTE: 99-07 FLHR/ FLHX seats will fit 99-07 FLT/ FLHT/ FLTR

models when used with lower dash extension PART #2202-0070; see DASHES & GAUGES section.

0801‑13050801‑1303

0801‑1306

0801‑1293

0801‑1308

0801‑1292

PART # DESCRIPTIONFOR 08‑20 FLHR/ FLHT/ FLHX/ FLTR/ FLTRU/ FLTRK/ FLTRX0801‑1292 Seat0801‑1293 Pillion pad

PART # DESCRIPTIONFOR 08‑20 FLHT/ FLHR/ FLHRC/ FLTR/ FLHX/ FLHTC/ FLHTCU MODELS; 77,5 CM L OVERALL (38 CM L X 30,5 CM W FRONT) (28 CM L X 23 CM W REAR); 301/2” L OVERALL (15” L X 12” W FRONT) (11” L X 9” W REAR)0801‑1303 Smooth0801‑1304 Double diamond, black thread0801‑1305 Double diamond, silver thread0801‑1306 Double diamond, red thread

PART # DESCRIPTIONFOR 99‑07 FLHT/ FLHR/ FLHRC/ FLTR/ FLHX/ FLHTC/ FLHTCU MODELS; 78 CM L OVERALL (42 CM L X 30,5 CM W FRONT) (28,5 CM L X 23 CM W REAR); 303/4” L OVERALL (161/2” L X12” W FRONT) (111/4” L X 9” W REAR)0801‑1307 Smooth0801‑1308 Double diamond, black thread0801‑1309 Double diamond, silver thread0801‑1310 Double diamond, red thread

6 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

CHOPPED TOUR-PAK® BACKREST PADS• Matches Drag Specialties seats• High-density foam interior• Features solar-reflective leather in the contact area

and automotive-grade vinyl on the sides• Includes the lower pad that is optional for installation• Measures 11,5 cm tall x 31 cm wide x 44 mm thick (41/2” x 121/4” x 13/4”)• Three bolts to secure pad to Tour-Pak• Requires drilling three holes into Tour-Pak

0822‑0433 0822‑04340822‑0432

BACKREST PADS FOR SQUARE SISSY BARS• Fits 14 mm x 51 mm (9/16” x 2”) thick Drag Specialties sissy bars

and most Harley-Davidson sissy bars with a 10 cm (4”) wide ID• High-quality automotive-grade vinyl on sides and in the contact area• Each pad comes with two black powdercoated

12-gauge brackets and four 1/4” x 20 screws• Includes all mounting hardwareNOTE: Pads will not fit sissy bars with welded inserts.

0822‑04420822‑04410822‑0440

0822‑04370822‑04360822‑0435

TOUR BOX PADS• Matches H-D King Tour-Pak® and Drag Specialties Tour Box

perfectly, and works with all OEM and Drag Specialties seats • 14-20 HD King-style models feature solar-reflective leather in

the contact area and automotive-grade vinyl on the sides • 86-13 HD King-style tour-boxes are made from high-quality automotive-grade vinyl• Molded polyurethane foam for maximum comfort and styling• Includes rubber pads and all hardware for mounting• Standard-length armrest makes for easy on-and-off of motorcycle• Includes all mounting hardware

PART # DESCRIPTIONFOR 14‑20 HD KING‑STYLE MODELS (63,5 CM X 39,5 CM) (25” W X 151/2” H)0822‑0438 Double diamond, silver stitch0822‑0439 Double diamond, red stitchFOR 86‑13 HD KING‑STYLE TOUR‑BOX (59,5 CM X 24 CM) (231/2” W X 91/2” H)0822‑0435 Double diamond, black stitch0822‑0436 Double diamond, silver stitch0822‑0437 Double diamond, red stitch

PART # DESCRIPTION0822‑0432 Double diamond, black stitch0822‑0433 Double diamond, silver stitch0822‑0434 Double diamond, red stitch

PART # DESCRIPTIONTALL PADS 25,5 CM H X 14 CM W X 51 MM THICK (10” H X 51/2” W X 2” THICK)0822‑0440 Double diamond, black stitch0822‑0441 Double diamond, silver stitch0822‑0442 Double diamond, red stitch

0822‑04390822‑0438

7 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

SHORT DETACHABLE BACKRESTS• Shorter than the standard detachable backrest with a smaller pad• Pad measures 16,5 cm W x 11,5 cm H (6,5” x 4,5”)• A detachable backrest offers the best of both worlds for your passenger• The convenience of a comfortable back support for your

passenger, with the ability to quickly remove• Backrest works with the standard H-D detachable docking kit or use with

the Cobra docking kits; see page 352 of the 2021 Parts Europe FatBook• Does NOT require the relocation of turn signals• Available in chrome or black

BA DETACHABLE LUGGAGE RACKS• Uses Cobra’s proprietary release mechanism,

can be installed/ removed in seconds• Uses simple plunger-type spring

for installation and removal• Available in chrome or black• Must install either a Cobra docking kit

or a Harley Davidson four-point docking kit before installing this rack

• See page 173 of the 2021 Parts Europe FatBook for docking kits

• Measures 35,5 cm L x 44,5 cm W (14” x 17.5”)

1501‑0685

1501‑0686

1501‑0687 1501‑0688

1510‑08421510‑0843

BA DETACHABLE WRAPAROUND RACKS• Designed for use with OEM seats

or some aftermarket seats• OEM models are approximately 33 cm (13”) from front to back and 48,5 cm (19”) wide• Aftermarket models are 43 cm (17”) wide• Include all mounting hardware• Available in chrome or black

1510‑0659 1510‑0663 1510‑0660

DETACHABLE BACKRESTS• A detachable backrest offers the best of both worlds for your passenger• The convenience of a comfortable back support for your

passenger, with the ability to be removed quickly• Backrest works with the standard H-D detachable docking kit or use with

the Cobra docking kits; see page 352 of the 2021 Parts Europe FatBook• Does NOT require the relocation of turn signals• Pad measures 28,8 cm W x 20,5 cm H (111/8” x 8”)• Available in chrome or black

PART # DESCRIPTIONFOR 97‑08 FLHR/ FLT/ FLHT/ FLTR/ FLHX1501‑0685 Chrome1501‑0686 Black

PART # DESCRIPTIONFOR 97‑08 FLHR/ FLT/ FLHT/ FLTR/ FLHX1501‑0687 Chrome1501‑0688 Black

PART # DESCRIPTIONFLAT RACKS FOR 97‑08 FLHR/ FLHT/ FLTR/ FLHX MODELS1510‑0843 Chrome1510‑0844 Black

PART # DESCRIPTIONFLIP‑UP RACKS FOR 97‑08 FLHR/ FLHT/ FLTR/ FLHX MODELS1510‑0841 Chrome1510‑0842 Black

PART # DESCRIPTIONFOR 06‑17 DYNA MODELS W/ OEM SEATS1510‑0658 Chrome1510‑0659 Black

PART # DESCRIPTIONFOR 06‑17 DYNA MODELS W/ SADDLEMEN SEATS (WILL NOT FIT FXDWG/ FXDF MODELS)1510‑0662 Chrome1510‑0663 Black

PART # DESCRIPTIONFOR 04‑20 XL MODELS1510‑0660 Chrome1510‑0661 Black

8 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

VO2 X AIR INTAKES• Extract the maximum performance

from any machine by utilizing the K&N Xstream[R] high-flow air filter

• CNC-machined billet cover• High-capacity washable air filter element• Include backing plate, venturi

and breather assemblies• Available in chrome or black contrast finishDESCRIPTION PART #FOR 17‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/H‑D FL TRIKESChrome 1010‑2619Black 1010‑2620FOR 08‑16 FLHT/ FLHR/ FLHX/ FLTR/H‑D FL TRIKES, 16‑17 FXDLS, 16‑17 SOFTAILS, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSEChrome 1010‑2621Black 1010‑2622FOR 18‑20 SOFTAILSChrome 1010‑2623Black 1010‑2624

DESCRIPTION PART #FOR 01‑17 TWIN CAM W/ DELPHI EFI, 99‑06 TWIN CAM W/ CV CARB (EXCEPT 08‑17 FLHT/ FLHR/ FLHX/ FLTR/H‑D FL TRIKES, 16‑17 FXDLS, 16‑17 SOFTAILS, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSE)Chrome 1010‑2625Black 1010‑2626FOR 91‑20 XLChrome 1010‑2627Black 1010‑2628

VO2 BLADE AIR INTAKES• Sharp, clean lines give any V-Twin the

edge in both show and go by utilizing the K&N Xstream[R] high-flow air filter

• CNC-machined billet cover• High-capacity washable air filter element• Include backing plate, venturi and breather assemblies• Available in chrome or black contrast finishDESCRIPTION PART #FOR 17‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK/H‑D FL TRIKESChrome 1010‑2679Black 1010‑2680FOR 08‑16 FLHT/ FLHR/ FLHX/ FLTR/H‑D FL TRIKES, 16‑17 FXDLS, 16‑17 SOFTAILS, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSEChrome 1010‑2681Black 1010‑2682FOR 18‑20 SOFTAILSChrome 1010‑2683Black 1010‑2684

DESCRIPTION PART #FOR 99‑17 TWIN CAM W/ DELPHI EFI, 99‑06 TWIN CAM W/ CV CARB (EXCEPT 08‑17 FLHT/ FLHR/ FLHX/ FLTR/H‑D FL TRIKES, 16‑17 FXDLS, 16‑17 SOFTAILS, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSE)Chrome 1010‑2685Black 1010‑2686FOR 91‑20 XLChrome 1010‑2687Black 1010‑2688

1010‑2680

1010‑2679

1010‑2619 1010‑2620

9 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

METHOD CLEAR SERIES AIR CLEANER KITS• Forged billet aluminum air cleaner featuring a polycarbonate

window to view the internal workings of air intake system• Polycarbonate window is coated with proprietary film that prevents

oil adhesion, yellowing, or marring from engine oil or UV exposure to maintain window clarity for a clear view of engine’s internals

• Forged billet aluminum backing plate with internal hidden breather backing plate technology eliminating the need for external hoses or hardware for a virtually closed loop system

• Radius air inlet provides unobstructed airflow into engine• High-performance filter is constructed from black

pre-oiled cotton for optimum flow and filtration• Filter is washable and reusable• Includes gaskets and necessary hardware• Titanium anodized finish

10-GAUGE SADDLEBAG HINGE COVERS• Machined from 6061-T6 billet aluminum• Unique and clean style• Replace the factory hinge covers• Sold in pairs

1010‑2654

3501‑1639

3501‑1637

3501‑1638

3501‑16363501‑1635

3501‑1634

PART # DESCRIPTION1010‑2654 For 17‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/H‑D FL Trike, 18‑20 Softails1010‑2655 For 08‑16 FLHT/ FLHR/ FLHX/ FLTR/H‑D FL Trike, 16‑17 Softails, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSE, 16‑17 FXDLS1010‑2656 For 01‑17 Twin Cam Dephi EFI models and 99‑06 Twin Cam CV carb models (except 08‑16 FLHT/ FLHR/ FLHX/ FLTR/

H‑D FL Trike, 16‑17 Softails, 14‑15 FLSTNSE, 13‑14 FXSBSE, 11‑12 FLSTSE, 16‑17 FXDLS)1010‑26571 For 91‑20 XL1 Will fit 88‑90 models also; breather system is not applicable for these model years.

PART # DESCRIPTION3501‑1634 Black anodized3501‑1635 Blue anodized3501‑1636 Gold anodized

PART # DESCRIPTION3501‑1637 Orange anodized3501‑1638 Red anodized3501‑1639 Titanium anodized

FOR 14‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK

10 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

HIGH-PERFORMANCE STARTER MOTORS• 100% new – not remanufactured!• Special pinion shaft threads and extended jackshaft

bolt allow for a wider range of applications• Starter features oversize clutch rollers, cold headed steel idler gears

and armature hairpins that are resistance-fused to the armature• A new replacement unit for stock and slightly modified

engines; generates more power than the OEM stock starter• Available in a black finishNOTE: For optimum performance, use with

Drag Specialties battery and battery cables.

2110‑1101

2110‑1102

STARTER DRIVE CLUTCH• High-quality components to repair

common failures of OEM Harley starters• Designed to improve clutch life

under hard starting conditions

IGNITION WIRING HARNESS• Matches OEM specs• Simple, plug-and-play installation

SOLID-STATE REGULATORS• High-reliability 12V voltage regulators feature rugged aluminum alloy

construction and are available in chrome or black finish• All provide accurately regulated voltage under all electrical loads,

have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

2112‑13182112‑13172112‑1315

PART # DESCRIPTION2110‑1102 For 17‑20 Dresser/ Trike models; repl. OEM #314000532110‑1101 For 18‑20 Softail models; repl. OEM #31400057

PART # DESCRIPTION2110‑1100 For 17‑20 M‑Eight

PART # DESCRIPTION2120‑1065 For Twin Cam models w/ 04‑06 OEM style or

Screamin’ Eagle style ignition modules

FITS MODEL CHROME BLACK OEM # AMPSFor 17‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU 2112‑1315 ‑ 74700025 50For 18‑20 Softail 2112‑1317 2112‑1318 74700031 40

11 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

ALLOY ARTAmerican-made high-quality custom parts and accessories for American V-Twin motorcycles is the passion of Alloy Art. Started in 1999, their parts emphasize a signature style of functional performance and a less-is-more clean custom style. Their cush drive chain conversion systems let you run a chain final drive on your Big Twin. The CNC-machined billet aluminum carrier and hub adapter look incredible and have a CNC-machined carbon steel sprocket for strength and durability.

UNIVERSAL CUSH DRIVE CHAIN CONVERSION SYSTEMS• CNC-machined billet aluminum carrier and hub adapter• CNC-machined sprocket made of 1026 medium- to high-carbon steel

• Fits any stock Harley-Davidson™ or aftermarket wheel• Available with machined finish or black anodized

aluminum carrier, and black or gold sprocket

CUSH DRIVE CHAIN SPROCKETS• CNC-machined aluminum carrier• 1026 medium-to-high carbon steel CNC-machined sprocket• Available with machined finish aluminum carrier or black anodized

aluminum carrier with black or gold nitride steel sprocket• Kits include stainless steel lock spring,

two bearings and bearing spacer• Use with a 0,750” offset front sprocket (sold separately)

1210‑2511

1210‑2508

PART # DESCRIPTIONMACHINED CARRIER1210‑2505 Black 51T1210‑2506 Gold 51T1210‑2507 Black 53T1210‑2508 Gold 53T

PART # DESCRIPTIONBLACK ANODIZED CARRIER1210‑2509 Black 51T1210‑2510 Gold 51T1210‑2511 Black 53T1210‑2512 Gold 53T

FOR 09‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK MODELS

PART # DESCRIPTIONMACHINED CARRIER1210‑2497 Black 51T1210‑2498 Gold 51T1210‑2499 Black 53T1210‑2500 Gold 53T

PART # DESCRIPTIONBLACK ANODIZED CARRIER1210‑2501 Black 51T1210‑2502 Gold 51T1210‑2503 Black 53T1210‑2504 Gold 53T

1210‑25021210‑25011210‑24981210‑2497

12 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

LED FRONT FORK LIGHTZ• Replace the OEM front fork reflectors• Super-bright intensity LEDs provide excellent side visiblity• Function as running lights and turn signals• Units are pre-taped to adhere in place of OEM reflector• Available in chrome or black finish• Plug-and-play

PROBEAM® ADD-ON MINI-TAILLIGHTS FOR TURN SIGNAL ELIMINATOR• Designed for use with Custom Dynamics Turn Signal Eliminator brackets

PART #s 2040-2335, 2040-2336, 2030-1453, 2030-1498, 2030-1497, 2030-1496, 2030-1495 (see page 1083 of the 2021 Parts Europe FatBook)

• No drilling required• Mounts to fender with tape• Run and brake function• Available in smoke or red lens• Plug and play

2010‑1429 2010‑1430

2040‑2658 2040‑2660

2040‑2653

2040‑2647

TAILLIGHT BASEPLATES• Replaces factory taillight baseplate on early-model Harley-Davidson

models to allow for secure mounting of Custom Dynamics LED Taillights• Includes wire harness which connects to factory taillight wiring• Available in black or chrome finish• Mounting hardware included• Plug-and-play

2010‑1418 2010‑1419

TRIBAR ELIMINATOR HARNESSES• Eliminate the TriBar light at the

bottom of the stock fender (OEM PART #’s 69375-10 or 59600008)

• Provide power to rear turn signal bar• Plug-and-play

2120‑1039

2120‑1038

PART # DESCRIPTIONFOR 14‑20 FLHTCU/ FLHTCUL/ FLHTK/ FLHTKL/ FLHTKSE/ FLHX/ FLHXS/ FLHXSE, 15‑20 FLTRX/ FLTRXS/ FLTRK/ FLTRU/ FLTRXSE/ FLTRUSE AND 19‑20 FLHT2040‑2647 Amber lens, black finish2040‑2648 Amber lens, chrome finish2040‑2649 Smoke lens, black finish2040‑2650 Smoke lens, chrome finishFOR 97‑13 FLHR/ FLHRC/ FLTRU/ FLTRUSE, 99‑09 FLTR, 06‑09 FLHX, 10‑11 FLHXXX, 10‑13 FLHTCUTG, 00‑17 SOFTAILS, 98‑99 DYNA AND 99‑03 XL MODELS2040‑2651 Amber lens, black finish2040‑2652 Amber lens, chrome finish2040‑2653 Smoke lens, black finish2040‑2654 Smoke lens, chrome finishFOR 10‑13 FLHX/ FLTRX MODELS2040‑2655 Amber lens, black finish

PART # DESCRIPTIONFOR 10‑13 FLHX/ FLTRX MODELS (CONT)2040‑2656 Amber lens, chrome finish2040‑2657 Smoke lens, black finish2040‑2658 Smoke lens, chrome finishFOR 10‑13 FLHXSE/ FLTRXSE AND 13 FLHRSE2040‑2659 Amber lens, black finish2040‑2660 Amber lens, chrome finish2040‑2661 Smoke lens, black finish2040‑2662 Smoke lens, chrome finishFOR ALL MODELS WITH 12VDC NEGATIVE GROUND SYSTEMS2040‑2663 Amber lens, black finish2040‑2664 Amber lens, chrome finish2040‑2665 Smoke lens, black finish2040‑2666 Smoke lens, chrome finish

PART # DESCRIPTION2120‑1039 For 14‑20 FLHX/ FLHXS/ FLTR/ FLTRS/ FLHR models2120‑1038 For 10‑13 FLHX/ FLTR models

PART # DESCRIPTIONFOR ALL 73‑98 AND EARLIER HD MODELS2010‑1418 Black2010‑1419 Chrome

PART # DESCRIPTIONFOR 14‑20 FLHX/ FLHXS/ FLTRX/ FLTRXS/ FLHRS (DOES NOT FIT CVO MODELS)2010‑1429 Smoke lens2010‑1430 Red lensFOR 10‑13 FLHX/ FLTRX (DOES NOT FIT CVO MODELS)2010‑1432 Smoke lens2010‑1431 Red lens

13 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

THRASHIN SUPPLY COMPANYDesigned in Los Angeles, used around the world. Thrashin was started in 2014 by a close-knit group of friends who shared a passion for motorcycles. They like to design parts that add function and style. The new clutch and brake perch clamps are beautiful CNC-machined pieces that fit stock clutch and brake perches. A simple change that adds a big visual impact. Add a cool custom touch to your bike with the latest parts from Thrashin Supply Company.

CLUTCH AND BRAKE PERCH CLAMPS• Designed to work with stock Harley-Davidson® clutch and brake perches• CNC-machined of 6061 aluminum• Include ARP® stainless mounting hardware• Sold in pairs

0615‑0327

0615‑0325

0615‑0324

SHOCKS• High-performance, 7075-T6 aircraft aluminum

construction; a wet born piston rod and self-adjusting bearing• Radial piston with straight flow and preload through a pre-combustion oil chamber offers optimum response• Anti-block system features a separate overpressure valve that prevents the shock from hydraulic lock• Anti-fading damping system• Rebound/ compression adjuster; 50/30 clicks• Features progressive spring and threaded spring preload adjuster• Adjusted for a solo rider and occasional two-up riding; spring load can be adjusted to personal preference

PART # DESCRIPTIONFOR 96‑20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, 96‑20 SOFTAILS, 96‑17 DYNA, 89‑00 FXR AND 96‑03 XL0615‑0324 Raw0615‑0325 Black0615‑0326 Chrome0615‑0327 Twice‑cutFOR 04‑20 XL0615‑0328 Raw0615‑0329 Black0615‑0330 Chrome0615‑0331 Twice‑cut

DESCRIPTION 306 MM (12”) 318 MM (12,5”) 330 MM (13”)FULLY ADJUSTABLE WITH FIXED RESERVOIRFor 15‑20 FLHT/ FLHR/ FLTR/ FLHX 1310‑2085 1310‑2086 1310‑2087

14 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

429 SERIES SHOCKS• High pressure nitrogen-charged damper• 40 mm steel monotube construction• Adjustable pre-load• Progressive rate spring• Deflective disc valvingNOTE: All shocks are measured center‑of‑eyelet to center‑of‑eyelet.NOTE: Heavy‑duty applications are recommended for bikes

that are operated at or near the manufacturer’s maximum load rating over 50% of the time.

OEM STYLE FORK TUBES• Highly durable hard chrome finish• Offer less drag and improved seal wear• Accept all OEM components• Sold in pairs

BOLT COVER KITS• Beautifully designed pieces to cover the raw OEM bolt heads

on your engine, transmission, primary and more• Easy to install with included detailed installation instructions• Made from ABS material, fasten with silicone; sold separately• Available in chrome or black finishes• Engine kits include motor bolt covers only• Deluxe kits include motor/ transmission/ primary and select chassis bolt covers

2404‑0985

PART # DESCRIPTIONFOR ALL 17‑20 M‑EIGHT MODELS2404‑0982 Deluxe kit, chrome2404‑0983 Deluxe kit, black

PART # DESCRIPTIONFOR ALL 17‑20 M‑EIGHT MODELS (CONT)2404‑0984 Engine kit, chrome2404‑0985 Engine kit, black

PART # DESCRIPTIONFOR 18‑20 SOFTAIL MODELSSTANDARD‑DUTY1310‑2010 310 mm (12,2”)1310‑2009 320 mm (12,6”)1310‑2008 332 mm (13,1”)1310‑2007 343 mm (13,5”)HEAVY‑DUTY1310‑2014 310 mm (12,2”)1310‑2013 320 mm (12,6”)1310‑2012 332 mm (13,1”)1310‑2011 343 mm (13,5”)

PART # LENGTHFOR 99‑13 FLT/ FLHT/ FLHR/ FLTR, 41 MM0404‑0502 616 mm (24,25”)

1310‑2007

15 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

DECEMBER 2020

RIVCORivco is an independent manufacturer of parts and accessories in the U.S.A. The company offers more than 350 unique parts and accessories for motorcycles all designed at their Burlington, Wisconsin factory. Their newest custom accent pegs are a male-mount design that has anti-vibration rubber inserts. A simple change to the bike that adds a custom touch and comfort to your ride.

CUSTOM ACCENT FOOTPEGS• Matte black or chrome pegs with anti-vibration rubber inlays• Male-mount design• Stainless steel 9,5 mm (3/8”) bolts will fit most arms and clamps• Sold in pairs

COMMANDER™ PASSENGER BOARDS• Made from forged aluminum, these boards are

CNC-milled for unparalleled strength and durability• Finished with brilliant chrome• Each board utilizes Big Bike Parts® anti-rotation mount system to allow

full adjustability and ensure the boards will not pivot once secured• Generous board size allows for a comfortable footrest for passengers• Boards are designed to fit all models with

11,1 mm (7/16”) female foot peg supports

1620‑2200

1620‑2199

PART # DESCRIPTION1620‑2199 Matte black

PART # DESCRIPTION1620‑2200 Chrome

PART # DESCRIPTION1621‑1023 Commander™ passenger boards