Upload
jeffery-heath
View
215
Download
3
Embed Size (px)
Citation preview
The Bell Camera1
Trainer Training
The Bell Camera
The Bell Camera2
The Bell Camera
3
TVVIDEO
SWITCH
Watch the bell
or the slider
The Bell Camera3
Setting Up
Turn on the power to the equipment rack– switch on the double power socket located
under the bench to the right of the ringing chamber door
The Bell Camera4
Setting Up
Switch on the TV set– press the round
black button– check that the
red light comes on
TV
The Bell Camera5
Setting Up
Set up the TV channel– press the ‘TV’ button on the remote control– check that the TV displays a blue screen
The Bell Camera6
Open the VCR front panel cover (pull forward with finger)
Switch the VCR on
Setting Up
The Bell Camera7
Setting Up
Select Auxiliary Input 2...Press ‘TV PROGRAM’ V
on fold down
panel
– display panel shows ‘AUX INPUT’
The Bell Camera8
Setting Up
Select Auxiliary Input 2...Press button AV/S SEL
– display panel shows ‘AUX INPUT 2’
The Bell Camera9
Lighting
• Switch on the bell chamber lights– If the bell chamber light switch has been
left ON you will be able to switch the main floodlight on from the landing outside the ringing chamber
• Plug in the additional ‘slider light’– This is the orange plug in the right hand
cupboard
The Bell Camera10
Changing the View
• Use the switch on top of the VCR to change views between the bell and the stay
The Bell Camera11
Fault Finding
• If picture seems reversed out…switch the camera off and on again
• If picture doesn’t appear…make sure the Handling Camera is disconnected from the VCR