Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
The adoption of the technical regulations of the Customs Union
"On the safety of toys" (as amended on December 12, 2012)
Customs Union Commission Decision of 23 September 2011 N 798 On the adoption of
technical regulations of the Customs Union "On the safety of toys"
(Amended on 12 Dec. 2012)
____________________________________________________________________
Document as amended: the decision of the College of ECE on December 12, 2012 N
276 (Official website of the Commission of the Customs Union www.tsouz.ru, 14.12.2012).
In accordance with Article 13 of the Agreement on common principles and rules of
technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian
Federation, dated 18 November 2010 the Commission of the Customs Union (hereinafter -
the Commission) has decided to:
1. Adopt technical regulations of the Customs Union "On the safety of toys" (TR TC
008/2011) *.
* application, see the link. - Note the manufacturer's database.
2. Approve:
2.1. List of standards as a result of which, on a voluntary basis, compliance with the
technical regulations of the Customs Union "On the safety of toys" (TR TC 008/2011) ;
2.2. List of standards containing rules and methods (tests) and measurements, including
the rules of sampling necessary for the implementation and enforcement of the technical
regulations of the Customs Union "On the safety of toys" (TR TC 008/2011) and the
implementation of the assessment (confirmation ) conformity of the product .
3. Install:
3.1. Technical Regulations of the Customs Union "On the safety of toys" (hereinafter -
Technical Regulations) come into force on 1 July 2012;
3.2. Appraisal Documents (confirmation) of compliance with mandatory requirements
established by regulations of the Customs Union, or the law of the state - a member of the
Customs Union, issued or adopted in respect of goods to which the technical regulations of
2
the Technical Regulations (hereinafter - products), up to the date of entry into force of the
Technical Regulations remain valid until their expiration, but not later than 15 February
2014. These documents issued or adopted prior to the date of publication of this Decision
shall be valid until their expiration. On the entry into force of the Technical Regulations
issuance or acceptance of evaluation documents (confirmation) of conformity with
mandatory requirements previously established regulations of the Customs Union, or the
law State - a member of the Customs Union shall not be permitted;
3.3. Until February 15, 2014 allowed the production and introduction of products in
accordance with the regulatory requirements, the previously established regulations of the
Customs Union, or the law of the state - a member of the Customs Union, in the presence of
evaluation documents (confirmation) of conformity specified mandatory requirements issued
or adopted before the effective date of the Technical Regulations.
The above products are marked with the national conformity (with a market), in
accordance with the Commission or the laws of the State - a member of the Customs
Union. labeling of such products uniform mark of products on the market states -
members of the customs union is not allowed;
3.4. Handling products released into circulation during the period of evaluation
documents (confirmation) of compliance referred to in paragraph 3.2 of this Decision shall
be permitted during the period of life (life) products specified in accordance with the laws of
the State - a member of the Customs Union.
4. Secretariat of the Commission in cooperation with the Parties to prepare a draft plan of
activities required for the implementation of the Technical Regulations, and within three
months from the date of entry into force of this Decision, to provide representation for
approval by the Commission in due course.
5. With the participation of the Belarusian Party of the Parties on the basis of the
monitoring results of the application of standards to ensure the preparation of proposals to
update the lists of the standards referred to in paragraph 2 of this Decision, and the
presentation at least once a year from the date of entry into force of the Technical
Regulations in the Secretariat of the Commission for approval by the Commission in the
prescribed manner.
3
The members of the Commission of the Customs Union: For the Republic of
Belarus S.Rumas from the Republic of Kazakhstan U.Shukeev from the Russian
Federation Igor Shuvalov
The list of standards as a result of which, on a voluntary basis,
compliance with the technical regulations of the Customs Union
"On the safety of toys" (TR TC 008/2011)
APPROVED by
the decision of the Commission
of the Customs Union
on September 23, 2011 N 798
(as amended, entered into force on January 13, 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition )
The list of standards as a result of which, on a voluntary basis, compliance with the technical
regulations of the Customs Union "On the safety of toys" (TR TC 008/2011)
N
p
/
p
Elements of the
technical regulations
of the Customs Union
Designation
Standard.
Information
about changes
Standard name Examples
chanie
1 2 3 4 5
1 Article 4 ,paragraphs
2 ,3.1 , 3.2(paragraphs
1-7, 9-18, 20,
22-24), 4 and 5
GOST
25779-90 , the
change from
01/06/92 N 1, N
2 change from
01.06.2002
Toys. General safety
requirements and
methods of control
PrEN
71-8-2006
Toys. Safety
requirements. Part
8. Swings, slides and
similar toys for outdoor
4
activities indoors and
outdoors
GOST R
53906-2010
Toys. General safety
requirements and test
methods. Mechanical
and physical properties
RK GOST R
51555-2008 *
Toys. General safety
requirements and test
methods. Mechanical
and physical properties
* Standard is identical to IEC 51555-99 . On the territory of the Russian Federation,
the document is not valid. Acts GOST R 53906-2010 . - Note the manufacturer's
database. - Note the manufacturer's database.
2 Article 4 ,paragraph
3.3
GOST ISO
8124-2-2001
Toys. General safety
requirements and test
methods. Flammability
GOST
25779-90 , the
change from
01/06/92 N 1, N
2 change from
01.06.2002
Toys. General safety
requirements and
methods of control
GOST R ISO
8124-2-2008
Toys. General
requirements for
safety. Part
2.Flammability
3 Article 4 ,paragraphs
3.4and 3.5 , Annex 2
GOST ISO
8124-3-2001
Toys. General safety
requirements and test
methods. The release
of harmful elements for
children's health
GOST
25779-90 , the
change from
Toys. General safety
requirements and
methods of control
5
01/06/92 N 1, N
2 change from
01.06.2002
PrEN
71-4-2004
Toys. Safety
requirements. Part
4. Sets for chemistry
and related activities
PrEN
71-5-2004
Toys. Safety
requirements. Part
5. Play sets (sets),
comprising chemicals
and related kits for
carrying out chemical
tests
STB
1700-2006 (EN
71-7:2002)
Toys. Safety
requirements. Part
7. Paints for finger
painting. Technical
requirements and test
methods
RK ISO
8124-3-2008 *
Toys. General safety
requirements and test
methods. The release
of harmful elements for
children's health
* Access to international and foreign documents can be obtained by clicking on the link
to the website http://shop.cntd.ru . - Note the manufacturer's database.
4 Article 4 ,paragraphs
3.2(paragraph
25),3.6 and 5
GOST
25779-90 , the
change from
01/06/92 N 1, N
2 change from
01.06.2002
Toys. General safety
requirements and
methods of control
STB IEC Electric toys. Safety
6
62115-2008 requirements
GOST
51557-99
Electric toys. Safety
requirements
RK GOST R
51557-2008 *
Electric toys. Safety
requirements
* Standard is identical to IEC 51557-99 . - Note the manufacturer's database.
5 Article 4 ,paragraph
3.2(paragraph 26)
STB IEC
60825-1-2011
Safety of laser
products. Part
1. Equipment
classification and
requirements
IEC
60825-1-2009
Safety of laser
products. Part
1. Equipment
classification and guide
for consumers
The list of standards containing rules and methods (tests) and
measurements, including the rules of sampling required for the
application and enforcement of the technical regulations of the
Customs Union "On the safety of toys" (TR CU ...
APPROVED by
the decision of the Commission
of the Customs Union
on September 23, 2011 N 798
The list of standards containing rules and methods (tests) and measurements,
including the rules of sampling needed to implement and enforce the requirements
of the technical regulations of the Customs Union "On the safety of toys" (TR TC
7
008/2011) and the implementation of assessment (confirmation) of compliance
Product
(Amended on 12 Dec. 2012)
N p
/ p
Elements of
Technical
Regulations
Designation
Standard.
Information about
changes
Standard name Exampl
es
chanie
1 2 3 4 5
1. Appendix 2 GOST 15820-82 Polystyrene and
copolymers of
styrene. Gas
chromatographic method
for the determination of
residual monomers and
impurities
unpolymerizable
2. GOST 18165-89 Drinking water. Method
for the determination of
the mass concentration of
aluminum
3. Sampling GOST 18321-73 Statistical quality
control. Methods of
random selection of
samples pieces of
product
4. Article
4 ,paragraph
3.1 , Annex 2
GOST 22648-77 Plastics. Methods for
determining the health
indicators
(Position as amended, entered into force on January 13, 2013 decision of the Board of
ECE December 12, 2012 N 276 . - See the previous edition )
5. GOST 24295-80 Dishes economic
enamelled steel. Methods
for analysis of extracts
8
6. GOST 26150-84 Materials and products
based on polymer
finishing PVC. The
method of sanitary-
chemical assessment
7. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
8. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
9. Appendix 2 GOST
30351-2001
Polyamides, fibers,
fabrics, films made of
polyamide. Determination
of residual caprolactam
and low molecular weight
compounds and their
concentrations in the
water migration. Methods
of liquid and gas-liquid
chromatography
10. Appendix 2 GOST 50801-95 Wood raw materials,
timber, semi-finished
products and products of
wood and wood-based
materials
11. GOST 25737-91
(ISO 6401-85)
Plastics. Homopolymers
and copolymers of vinyl
chloride. Determination of
residual vinyl chloride
monomer. Gas
chromatographic method
12. Article
4 ,paragraphs
2, 3.1 , 3.2(paragra
phs 1-24), 4 and5
GOST 25779-90 ,
the change from
01/06/92 N 1, N 2
change from
Toys. General safety
requirements and
methods of control
9
01.06.2002
GOST R
53906-2010
Toys. General safety
requirements and test
methods. Mechanical and
physical properties
PrEN 71-8-2006 Toys. Safety
requirements. Part
8. Swings, slides and
similar toys for outdoor
activities indoors and
outdoors
RK GOST R
51555-2008 *
Toys. General safety
requirements and test
methods. Mechanical and
physical properties
* Standard is identical to IEC 51555-99 . On the
territory of the Russian Federation, the document is not
valid. Acts GOST R 53906-2010 . - Note the
manufacturer's database.
(Position as amended, entered into force on January 13, 2013 decision of the Board of
ECE December 12, 2012 N 276 . - See the previous edition )
13. Article
4 ,paragraph 3.3
GOST ISO
8124-2-2001
Toys. General safety
requirements and test
methods. Flammability
GOST 25779-90 ,
the change from
01/06/92 N 1, N 2
change from
01.06.2002
Toys. General safety
requirements and
methods of control
GOST R ISO
8124-2-2008
Toys. General
requirements for
safety. Part
2. Flammability
10
(Position as amended, entered into force on January 13, 2013 decision of the Board of
ECE December 12, 2012 N 276 . - See the previous edition )
14. Article
4 ,paragraphs
3.4 , 3.5 and3.8 , A
nnex 2
GOST ISO
8124-3-2001
Toys. General safety
requirements and test
methods. The release of
harmful elements for
children's health
GOST 25779-90 ,
the change from
01/06/92 N 1, N 2
change from
01.06.2002
Toys. General safety
requirements and
methods of control
RK ISO
8124-3-2008 *
Toys. General safety
requirements and test
methods. The release of
harmful elements for
children's health
* Access to international and foreign documents can be
obtained by clicking on the link to the
website http://shop.cntd.ru . - Note the manufacturer's
database.
STB
1700-2006(EN
71-7:2002)
Toys. Safety
requirements. Part
7. Paints for finger
painting. Technical
requirements and test
methods
(Position as amended, entered into force on January 13, 2013 decision of the Board of
ECE December 12, 2012 N 276 . - See the previous edition )
15. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
11
16. Article
4 ,paragraph
3.2(paragraphs 25,
26), 3.6and 5
GOST 25779-90 ,
the change from
01/06/92 N 1, N 2
change from
01.06.2002
Toys. General safety
requirements and
methods of control
STB IEC
60825-1-2011
Safety of laser
products. Part
1.Equipment
classification and
requirements
STB IEC
62115-2008
Electric toys. Safety
requirements
IEC
60825-1-2009
Safety of laser
products. Part
1.Equipment
classification and guide
for consumers
GOST 51557-99 Electric toys. Safety
requirements
RK GOST R
51557-2008 *
Electric toys. Safety
requirements
* Standard is identical to IEC 51557-99. - Note the
manufacturer's database.
(Position as amended, entered into force on January 13, 2013 decision of the Board of
ECE December 12, 2012 N 276 . - See the previous edition )
17. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
18. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
19. Appendix 2 GOST R ISO
7218-2008
Microbiology. General
guidance for
12
microbiological
examinations
20. GOST 51210-98 Drinking water. Method
for determination of boron
21. GOST 51309-99 Drinking
water. Determination of
elements by atomic
spectrometry
22. The position is excluded from the 13 January 2013 decision of the Board of ECE
December 12, 2012 N 276 . - See the previous edition .
23. Sanitary rules
and norms
2.4.7.14-34-2003
*
Toys and
games. Hygienic safety.
Methods of control. The
requirements for the
production and sale
* Applies to develop an appropriate intergovernmental
standard.
24. Sanitary rules
and norms
9-29-95 (RF N
2.1.8.042-96) *
Health standards
acceptable levels of
physical factors in the
application of consumer
goods in the domestic
environment
* Applies to develop an appropriate intergovernmental
standard.
25. MU 1.1.037-95 * Bioassay of the product
polymer and other
materials
* Applies to develop an appropriate intergovernmental
standard.
13
26. ME N
11-12-25-96 *
Guidelines for the
determination of
acrylonitrile in extracts
(sweat fluid) from the
fiber "Nitron D" by
gas-liquid
chromatography
* Applies to develop an appropriate intergovernmental
standard.
27. ME N 71-93 * Guidelines for the gas
chromatographic
measurement of the
concentration of acetone
in the air
* Applies to develop an appropriate intergovernmental
standard.
28. ME N 75-92 * Guidelines for the
determination of
formaldehyde in water,
aqueous extracts of
polymeric materials and
model media simulating
food
* Applies to develop an appropriate intergovernmental
standard.
29. ME N 76-93 *** Guidelines for the gas
chromatographic
measurement of the
concentrations of
14
methanol and ethanol in
the air
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
30. ME N 266-92 *** Guidelines for the gas
chromatographic
measurement of the
concentration of
formaldehyde in the air
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
31. ME N 268-92 *** Guidelines for the gas
chromatographic
measurement of the
concentration of
hydrogen cyanide and
acrylonitrile in the air:
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
32. MU 942-72 * "Guidelines for the
definition of the transition
of the polymer organic
solvent materials into
contact with the air, the
model solutions, dry and
liquid foods"
* Applies to develop an appropriate intergovernmental
15
standard.
33. ME N 1424-76 *** Guidelines for the
sampling of the objects in
the environment and to
prepare them for
subsequent
determination of
carcinogenic polycyclic
aromatic hydrocarbons ":
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
34. ME N 2563-82 * Guidelines for the
photometric
measurement of the
concentration of
acetaldehyde in the
working area
* Applies to develop an appropriate intergovernmental
standard.
35. ME N 2704-83 * Guidelines for the gas
chromatographic
determination of
metiltoluilata, dinila and
dimethyl terephthalate in
the air
* Applies to develop an appropriate intergovernmental
standard.
36. ME N 2902-83 * Guidelines for the gas
chromatographic
measurement of
16
concentrations of methyl,
ethyl, isopropyl, n-propyl,
n-butyl, sec-butyl and
isobutyl alcohol in the
working area
* Applies to develop an appropriate intergovernmental
standard.
37. ME N 3999-85 * Guidelines for the gas
chromatographic
measurement of the
concentration of ethylene
glycol and methanol in
the working area
* Applies to develop an appropriate intergovernmental
standard.
38. MU 4077-86 * Guidelines for the
sanitary-hygienic study of
rubber and their products
intended for contact with
food
* Applies to develop an appropriate intergovernmental
standard.
39. MU 4149-86 * Guidelines for the
implementation of state
supervision over the
production and
application of polymeric
materials class
polyolefins intended for
contact with food
* Applies to develop an appropriate intergovernmental
standard.
17
40. ME N 4167-86 * Guidelines for the gas
chromatographic
measurement of
concentrations of
gasoline, benzene,
toluene, ethyl benzene,
o-, m-and p-xylene,
styrene, pseudocumene
in the working area
* Applies to develop an appropriate intergovernmental
standard.
41. MU 4395-87 * Guidelines for the
hygienic assessment of
lacquered cans
* Applies to develop an appropriate intergovernmental
standard.
42. ME N 4477-87 * Guidelines for the gas
chromatographic
measurement of
concentrations of
benzene, toluene and
p-xylene in the working
area
* Applies to develop an appropriate intergovernmental
standard.
43. MU 4628-88 * Guidelines for the gas
chromatographic
determination of residual
monomers and
non-polymerizable
contaminants released
from polystyrene plastics
18
in water, model media
and food
* Applies to develop an appropriate intergovernmental
standard.
44. ME N 4759-88 * Guidelines for the gas
chromatographic
measurement of the
concentration of styrene
in the working area
* Applies to develop an appropriate intergovernmental
standard.
45. MUK
2.3.3.052-96 *
Sanitary-chemical studies
of products made of
polystyrene and styrene
copolymers
* Applies to develop an appropriate intergovernmental
standard.
46. MUK
4.1/4.3.1485-03 *
Hygienic evaluation of
clothing for children,
adolescents and adults
* Applies to develop an appropriate intergovernmental
standard.
47. MUK
4.1/4.3.2038-05 *
Sanitary-epidemiological
evaluation of toys
* Applies to develop an appropriate intergovernmental
standard.
48. MUK
4.1.025-95 *
Methods of measurement
of the mass concentration
of meth acrylic
compounds in the
19
environment
* Applies to develop an appropriate intergovernmental
standard.
49. MUK 4.1.078-96
***
Guidelines for the
measurement of the
mass concentration of
formaldehyde fluorimetric
method for airborne and
air of populated areas
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
50. MUK
4.1.580-96 *
Determination of
acrylonitrile evolved from
polyacrylonitrile fibers
into the air by gas
chromatography
* Applies to develop an appropriate intergovernmental
standard.
51. MUK
4.1.598-96 *
Guidelines for gas
chromatographic
determination of
aromatic, sulfur, halogen
compounds, methanol,
acetone and acetonitrile
in the air
* Applies to develop an appropriate intergovernmental
standard.
52. MUK
4.1.600-96 *
Guidelines for gas
chromatographic
determination of acetone,
20
methanol, and
isopropanol in the air
* Applies to develop an appropriate intergovernmental
standard.
53. MUK
4.1.607-06 ***
Guidelines for the
determination of vinyl
chloride in the air by
gas-liquid
chromatography
* Applies to develop an appropriate intergovernmental
standard.
** Probably the original error. It should read: "MUK
4.1.607-96." - Note the manufacturer's database.
54. MUK
4.1.611-96 *
Guidelines for the gas
chromatographic
determination of dimethyl
phthalate in the air
* Applies to develop an appropriate intergovernmental
standard.
55. MUK
4.1.614-96 *
Guidelines for the
definition of the air in
diethyl HPLC
* Applies to develop an appropriate intergovernmental
standard.
56. MUK
4.1.617-96 *
Guidelines for the gas
chromatographic
determination of xylenol,
cresol and phenol in the
air
* Applies to develop an appropriate intergovernmental
standard.
21
57. MUK
4.1.624-96 *
Guidelines for the gas
chromatographic
determination of methyl
and ethyl alcohol in the
air
* Applies to develop an appropriate intergovernmental
standard.
58. MUK
4.1.646-96 *
Guidelines for the gas
chromatographic
determination of
halogenated compounds
in water
* Applies to develop an appropriate intergovernmental
standard.
59. MUK
4.1.647-96 *
Guidelines for the gas
chromatographic
determination of phenol
in water
* Applies to develop an appropriate intergovernmental
standard.
60. MUK
4.1.649-96 *
Guidelines for the gas
chromatography-mass
spectrometric
determination of volatile
organic compounds in
water
* Applies to develop an appropriate intergovernmental
standard.
61. MUK
4.1.650-96 *
Guidelines for gas
chromatographic
determination of acetone,
methanol, benzene,
22
toluene, ethyl benzene,
pentane, o-, m-, p-xylene,
hexane, octane and
decane in water
* Applies to develop an appropriate intergovernmental
standard.
62. MUK
4.1.651-96 *
Guidelines for the gas
chromatographic
determination of toluene
in water
* Applies to develop an appropriate intergovernmental
standard.
63. MUK
4.1.652-96 *
Guidelines for the gas
chromatographic
determination of ethyl
benzene in water
* Applies to develop an appropriate intergovernmental
standard.
64. MUK
4.1.654-96 *
Guidelines for gas
chromatographic
determination of butanal,
butanol izizobutanola,
2-ethylhexanal,
2-ethylhexenal and
2-ethylhexanol in water
* Applies to develop an appropriate intergovernmental
standard.
65. MUK
4.1.656-96 *
Guidelines for the gas
chromatographic
determination of methyl
acrylate and methyl
methacrylate in water
23
* Applies to develop an appropriate intergovernmental
standard.
66. MUK
4.1.657-96 *
Guidelines for the gas
chromatographic
determination of butyl
acrylate and butyl
methacrylate in water
* Applies to develop an appropriate intergovernmental
standard.
67. MUK
4.1.658-96 *
Guidelines for the gas
chromatographic
determination of
acrylonitrile in water
* Applies to develop an appropriate intergovernmental
standard.
68. MUK
4.1.662-97 *
Guidelines for the
determination of the
mass concentration of
styrene in the air by gas
chromatography
* Applies to develop an appropriate intergovernmental
standard.
69. MUK
4.1.737-99 *
Chromatography-mass
spectrometric
determination of phenols
in water
* Applies to develop an appropriate intergovernmental
standard.
70. MUK
4.1.738-99 *
Chromatography-mass
spectrometric
determination of
24
phthalates and organic
acids in water
* Applies to develop an appropriate intergovernmental
standard.
71. MUK
4.1.739-99 *
Chromato-mass
spectrometric
determination of
benzene, toluene,
chlorobenzene, ethyl
benzene, o-xylene,
styrene, in water
* Applies to develop an appropriate intergovernmental
standard.
72. MUK
4.1.741-99 *
Chromatography-mass
spectrometric
determination of
phenanthrene,
anthracene, fluoranthene,
pyrene, chrysene and
benzo (a) pyrene in
water
* Applies to develop an appropriate intergovernmental
standard.
73. MUK
4.1.742-99 *
Inversion voltammetric
measurement of the
concentration of ions of
zinc, cadmium, lead and
copper in water
* Applies to develop an appropriate intergovernmental
standard.
74. MUK
4.1.745-99 *
Gas chromatographic
determination of dimethyl
25
ester of terephthalic acid
in water
* Applies to develop an appropriate intergovernmental
standard.
75. MUK
4.1.752-99 *
Gas chromatographic
determination of phenol
in water
* Applies to develop an appropriate intergovernmental
standard.
76. MUK
4.1.753-99 *
Ion chromatography
determination of
formaldehyde in water
* Applies to develop an appropriate intergovernmental
standard.
77. 4.1.1044a
MUK-01*
Gas chromatographic
determination of
acrylonitrile, acetonitrile,
dimethylamine
dimeilformamida,
diethylamine,
propylamine,
triethylamine, ethylamine,
and the air
* Applies to develop an appropriate intergovernmental
standard.
78. MUK 04/01/1046
(a) -01 ***
Gas chromatographic
determination of ortho-,
meta-and para-xylene in
air
* Applies to develop an appropriate intergovernmental
standard.
** Probably the original error. It should read: "MUK
26
4.1.1046-01." - Note the manufacturer's database.
79. MUK
4.1.1053-01 *
Ion chromatography
determination of
formaldehyde in the air
* Applies to develop an appropriate intergovernmental
standard.
80. MUK
4.1.1206-03 *
Gas chromatographic
determination of
acrylonitrile, acetonitrile,
dimethyl form amide,
diethyl amine and
triethylamine in water
* Applies to develop an appropriate intergovernmental
standard.
81. MUK
4.1.1209-03 *
Gas chromatographic
determination of
-caprolactam in water
* Applies to develop an appropriate intergovernmental
standard.
82. MUK
4.1.1256-03 *
The measurement of the
mass concentration of
zinc fluorimetric method
in samples of drinking
water and surface water
and underground water
sources
* Applies to develop an appropriate intergovernmental
standard.
83. MUK
4.1.1255-03 *
The measurement of the
mass concentration of
aluminum fluorimetric
27
method in samples of
drinking water and
surface water and
underground water
sources
* Applies to develop an appropriate intergovernmental
standard.
84. MUK
4.1.1257-03 *
The measurement of the
mass concentration of
boron fluorimetric method
in samples of drinking
water and surface water
and underground water
sources
* Applies to develop an appropriate intergovernmental
standard.
85. MUK
4.1.1263-03 *
Measurement of the
mass concentration of
total phenols and volatile
fluorimetric method in
samples of drinking water
and surface water and
underground water
sources
* Applies to develop an appropriate intergovernmental
standard.
86. MUK
4.1.1265-03 *
The measurement of the
mass concentration of
formaldehyde fluorimetric
method in samples of
drinking water and
surface water and
underground water
28
sources
* Applies to develop an appropriate intergovernmental
standard.
87. MUK
4.1.1271-03 *
The measurement of the
mass concentration of
phenol fluorimetric
method for airborne and
air of populated areas
* Applies to develop an appropriate intergovernmental
standard.
88. MUK
4.1.1272-03 *
The measurement of the
mass concentration of
formaldehyde fluorimetric
method for airborne and
air of populated areas
* Applies to develop an appropriate intergovernmental
standard.
89. MUK
4.1.1273-03 *
The measurement of the
mass concentration of
benzo (a) pyrene in the
air and in the working
area by HPLC with
fluorimetric detection
* Applies to develop an appropriate intergovernmental
standard.
90. MUK
4.1.1478-03 *
Determination of phenol
in the atmospheric air and
the air environment of
residential and public
buildings HPLC
* Applies to develop an appropriate intergovernmental
standard.
29
91. MUK
4.2.801-99 *
Methods for
microbiological control of
perfumes and cosmetics
* Applies to develop an appropriate intergovernmental
standard.
92. MUK 2715-83 * Guidelines for the gas
chromatographic
determination of
etilhlorgidrina (ECG) in
the air
* Applies to develop an appropriate intergovernmental
standard.
93. MR 01.022-07 * Gas chromatographic
determination of
acetaldehyde, acetone,
methyl acetate, ethyl
acetate, methanol,
isopropanol, ethanol,
n-propyl, n-propanol,
isobutyl acetate, butyl
acetate, isobutanol,
n-butanol, emitted into
the air from materials of
different composition
* Applies to develop an appropriate intergovernmental
standard.
94. MR 01.023-07 * Gas chromatographic
determination of hexane,
heptane, benzene,
toluene, ethyl benzene,
m-, o-, p-xylene,
isopropyl benzene,
30
n-propyl benzene,
styrene, a-methyl
styrene, Benz aldehyde
emitted into the air from
materials of different
composition
* Applies to develop an appropriate intergovernmental
standard.
95. MR 01.024-07 * Gas chromatographic
determination of hexane,
heptane, acetaldehyde,
acetone, methyl acetate,
ethyl acetate, methanol,
isopropanol, acrylonitrile,
n-propanol, n-propyl
acetate, isobutyl acetate,
butyl acetate, isobutanol,
n-butanol, benzene,
toluene, ethyl benzene,
m-, o - and p-xylene,
isopropyl benzene,
styrene, a-methyl styrene
in aqueous extracts of
materials of different
composition
* Applies to develop an appropriate intergovernmental
standard.
96. MR 01.025-07 * Gas chromatographic
determination of dimethyl
phthalate, dimethyl
phthalate, diethyl
phthalate, dibutyl
phthalate, butyl benzyl
phthalate, bis
31
(2-ethylhexyl) phthalate
and dioctyl phthalate in
aqueous extracts of
materials of different
composition
* Applies to develop an appropriate intergovernmental
standard.
97. MR N 29
FTS/830 *
Gas chromatographic
determination of mass
concentration of
benzene, toluene, ethyl
benzene, m-, p-and
o-xylene, isopropyl
benzene, n-propyl
benzene, styrene,
a-methyl styrene in
aqueous extracts of
polystyrene plastics
* Applies to develop an appropriate intergovernmental
standard.
98. MR N 29
FTS/2688-03 *
Rapid method toxicity
evaluation samples air
using water-soluble
components in the test
object as cattle semen
* Applies to develop an appropriate intergovernmental
standard.
99. MR 1503-76 * Guidelines for the
definition of
hexamethylene diamine
in water at the
32
sanitary-chemical studies
of polymeric materials
used in the food and
textile industries
* Applies to develop an appropriate intergovernmental
standard.
100
.
MR 1870-78 * Methodical
recommendations
merkurimetricheskomu
determination of small
amounts of vinyl acetate
in water, water-alcohol
solutions and foods "
* Applies to develop an appropriate intergovernmental
standard.
101
.
MR 1941-78 *** Guidelines for
determining vinyl
chloride, PVC and
plastics based on it, in the
model media simulating
food products in food
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
102
.
MR 2915-82 *** Guidelines for
determining vinyl acetate
in water by gas-liquid
chromatography
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
33
refer to the link . - Note the manufacturer's database.
103
.
MR 2946-83 * Guidelines. Measuring
the pulse of local
vibration
* Applies to develop an appropriate intergovernmental
standard.
104
.
RD
52.04.186-89 *
Guidelines for the control
of air pollution
* Applies to develop an appropriate intergovernmental
standard.
105
.
RD
52.24.488-95***
The method of
measurement of the
mass concentration
determination of the
amount of volatile
phenols in water by the
photometric method after
distillation with steam
* Applies to develop an appropriate intergovernmental
standard.
** Probably the original error. It should read: "RD
52.24.488-2006."- Note the manufacturer's database.
106
.
RD
52.24.492-95***
The method of
measurement of the
mass concentration of
formaldehyde in the
waters of the photometric
method with
acetylacetone
* Applies to develop an appropriate intergovernmental
standard.
** Probably the original error. It should read: "RD
34
52.24.492-2006."- Note the manufacturer's database.
107
.
PND F ***
14.1:2:4.36-95
The method of
measurement of the
mass concentration of
boron in samples of
natural, drinking and
waste water analyzer
fluid "Fluorat-02"
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
108
.
PND F
14.1:2:4.139-98 *
The method of
measurement of cobalt,
nickel, copper, chromium,
zinc, manganese, iron,
silver in drinking, natural
and waste waters by
atomic absorption
spectrometry with flame
atomization
* Applies to develop an appropriate intergovernmental
standard.
109
PND F
14.1:2:4.140-98 *
Measurement procedure
beryllium, vanadium,
bismuth, cadmium,
cobalt, copper,
molybdenum, arsenic,
nickel, tin, lead, selenium,
silver, antimony and
chromium in drinking,
natural and waste waters
by atomic absorption
35
spectrometry atomization
electrometer
* Applies to develop an appropriate intergovernmental
standard.
110
PND F
14.1:2:4.143-98 *
The method of
measurement of
aluminum, barium, boron,
iron, cobalt, manganese,
copper, nickel, strontium,
titanium, chromium and
zinc in drinking, natural
and waste waters by ICP
spectrometry
* Applies to develop an appropriate intergovernmental
standard.
111
PND F ***
14.2.22-95
The method of
measurement of the
mass concentration of
iron, cadmium, lead, zinc
and chromium in samples
of natural and waste
water by flame atomic
absorption spectrometry
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
112
PND F ***
14.1:2:4.117-97
The method of
measurement of the
mass concentration of
phenols in samples of
natural, drinking and
waste water analyzer
36
"Fluorat-02"
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
113
PND F ***
14.1:2:4.185-02
Methods for measuring
the mass concentration of
benzo (a) pyrene in
samples of natural,
drinking and waste water
by using an analyzer
kriolyuminestsentsii fluid
"Fluorat-02-2M" and the
prefix "CRYO-1"
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
114
PND F ***
14.1:2:4.186-02
Methods for measuring
the mass concentration of
benzo (a) pyrene in
samples of natural,
drinking and waste water
by high-performance
liquid chromatography
(HPLC) using a liquid
analyzer "Fluorat-02" as
a fluorimetric detector
(M0 1-21-01)
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
37
115
.
PND F ***
14.2:4.187-02
The method of
measurement of the
mass concentration of
formaldehyde in samples
of natural, drinking and
waste water analyzer
fluid "Fluorat-02"
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
116
.
PND F ***
14.2:4.70-96
The method of
measurement of
polycyclic aromatic
hydrocarbons in drinking
and natural waters
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
117
.
30.2:3.2-95 NDP
(NDP
30.2:3.2-04) *
The method of
measurement
-caprolactam in natural
and waste waters
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
118
.
Instruction N
091-0610 ***
Methods of
sanitary-microbiological
quality control of products
for children and
adolescents
38
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
119
.
Instructions
1.1.11-12-35-200
4 ***
Requirements for the
production of
experimental studies for
the primary toxicological
evaluation and hygienic
materials
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
120
.
Instructions
2.3.3.10-15-64-2
005 *
Sanitary-chemical studies
of products made of
plastics and other
synthetic materials in
contact with food
* Applies to develop an appropriate intergovernmental
standard.
121
.
Instructions
4.1.10-15-90-200
5 ***
Implementation of public
health surveillance of the
production and
application of polymeric
materials class
polyolefins intended for
contact with food
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
39
122
.
Instructions
4.1.10-15-91-200
5 ***
Gas chromatographic
method for determining
residual monomers and
non-polymerizable
impurities released from
polystyrene plastics in
water modeling
environments and
foodstuffs
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
123
.
Instructions
4.1.10-15-92-200
5 ***
Sanitary-chemical studies
of rubbers and their
products intended for
contact with food
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
124
.
Instructions
4.1.10-14-101-20
05 ***
Methods of study of
polymeric materials for
hygienic assessment
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
125
.
Instruction
880-71 N *
126 Instruction Instruction for the
40
. 4259-87 *** sanitary-chemical studies
of products made of
plastics and other
synthetic materials
intended for use in
drinking water supply and
water management
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
127
.
MVI MN
1401-2000 ***
Methods for measuring
the concentrations of
styrene in aqueous and
aqueous-alcoholic media,
simulating alcoholic
beverages by gas
chromatography
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
128
.
MVI. MN
1489-2001 ***
Methods for measuring
the concentrations of
benzo (a) pyrene in water
by liquid chromatography
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
129
.
MVI MN
1490-2001 ***
The method for
measuring the
concentration of
41
halogenated aliphatic
hydrocarbons in water
centralized drinking water
by gas-liquid
chromatography
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
130
.
MVI MN
1792-2002*
Methods for measuring
the concentrations of
elements in liquid
samples with a
spectrometer ARL 3410 +
* Applies to develop an appropriate intergovernmental
standard.
131
.
MVI. MN
1924-2003 ***
Method chromatographic
determination of phenol
and epichlorohydrin in
modeling environments
simulating food
* Applies to develop an appropriate intergovernmental
standard.
** Document temporarily omitted. For more information,
refer to the link . - Note the manufacturer's database.
132
.
MVI
MN. 2367-2005
Methods for measuring
the concentration of
terephthalic acid dimethyl
ester (DMT) in modeling
environments simulating
foods using gas
chromatography
42
133
.
MVI. MN
2558-2006
Methods for measuring
the concentrations of
acetone and
acetaldehyde in extracts
model media simulating
food products by gas
chromatography
134
.
Methods N
49-9804 *
Methodology gas
chromatographic
determination of dibutyl
phthalate and dioctyl
phthalate in the air and
gas emissions pulp and
paper industry
* The document is temporarily omitted. For more
information, refer to the link . - Note the manufacturer's
database.
135
.
Guidelines for the
sanitary-
chemical study of
children's latex nipple and
nipple-cartridges
pacifiers from 19.10.90 *
* The document is temporarily omitted. For more
information, refer to the link . - Note the manufacturer's
database.
136
.
Guidelines for the
hygienic assessment of
rubber and latex medical
products from 19.12.86 *
* The document is temporarily omitted. For more
information, refer to the link . - Note the manufacturer's
database.
43
137
.
Determination of
acrylonitrile, acetonitrile,
acetone and
acetaldehyde using gas
chromatography / / YY
Lurie Analytical chemistry
of industrial wastewater. -
M., 1984 *
* Applies to develop an appropriate intergovernmental
standard.
138
.
Separate determination
of various glycols and
glycerin by adsorption
chromatography / / YY
Lurie Analytical chemistry
of industrial wastewater. -
M., 1984 *
* Applies to develop an appropriate intergovernmental
standard.
139
.
Determination of phenol
and p-nitrofenildiazoniem
/ / Solovyov TV Guidance
on how to determine the
harmful substances in the
air. - Moscow, 1974 *
* Applies to develop an appropriate intergovernmental
standard.
140
.
Determination of acetone
and salicylaldehyde / /
Solovyov TV Guidance
on how to determine the
harmful substances in the
air.- M., 1974 *
44
* Applies to develop an appropriate intergovernmental
standard.
141
.
Determination of methyl
methacrylate on
formaldehyde / /
Solovyov TV Guidance
on how to determine the
harmful substances in the
air. - M., 1974 *
* Applies to develop an appropriate intergovernmental
standard.
14
2.
Methods for measuring the
concentrations of
acetaldehyde and acetone
extracts modeling
environments simulating
food products by gas
chromatography.Approved
. MOH 27.11.2006 *
* Applies to develop an appropriate intergovernmental
standard.