1

PC Backing up is nothing more making acopyof data and/or program files andthen keeping that copy in a safe place. Nothing more, nothing less. The key word in that statement is copy, as in duplicating the information. After you back up you have that same information in at least two or more places. In fact that leads to one of my most important rules of thumb: Backing up your computer is critical to avoiding data loss. I'll look at what it is, give a suggestion for average users, and I'll describe how I backup my computer. Here below lets see two absolutely simple guide to back up your PC using DVDFab PC Backup software together! Tip One:How to Transfer System to Dissimilar Computer? Truth be told, it is not easy to transfer the old system to another computer with different hardware configuration since most hardware requires corresponding driver installed to be functional. However, professionalPC transfer softwarecan help you make it. DVDFab PC Backup serves as a functionalsystem transfer software, which can migrate the system of your old PC to a new one with all programs and installed applications saved. Hence, when you buy a new computer, you don't need to waste your time to install the OS, the programs and applications any more. You can quickly have what you use most frequently and get into your work or personal use.

For achieving this goal, what you need to prepare are:1. A DVDFab PC Backup installed correctly on your new machine2. A system backup or disk/partition backup image file created under DVDFab PC Backup before3. A disk/USB with a proper WinPE emergency image file, which can be loaded on the new machine4. A .inf driver file of the new hardware on the new machine.And after all things mentioned above got ready, let's go and transfer the current system to your new PC with DVDFab PC Backup.Step 1: Boot your new machine from WinPEConnect your disk/USB containing a proper WinPE emergency image file to your new machine, then boot your new machine from WinPE environment by choosing the WinPE boot order under BIOS or UEFI.Step 2: Run DVDFab PC Backup, and click the System TransferRun DVDFab PC Backup installed on your new machine, then click the System Transfer located above the backup operation area.

Step 3: Select the System backup or Disk/Partition image file you created Following, the corresponding System Transfer window pops up. Here, choose the System backup or Disk/Partition backup image file you created before, and click the OK button.

Step 4: Confirm the transfer content As the illustrations show, you can click the History Version and confirm the content, and click the Next button.

Next, check Target on the following window.

6 Step 5: Run the system transfer task Hit the Proceed button, this system transfer task is executed immediately and will be finished soon. After the system transfer finishes, a prompted windows will come into your sight and ask for a inf driver of a specific hardware. You can easily find the driver according to the listed hardware info, and then just add it. Tip Two:How to Transfer Data of Current Hard Drive to Another? For this or that reason, you may have the need totransfer dataor system to another computer. Say, if you by a new computer, then you need to migrate your personal and important data from the current computer to the new one to let your new machine equipped with the ideal configuration you use most often. Or if you are used to collect good movies, music, pictures, etc. with time past, and what you collected are increasing, however, the storage of your hard drive is limited, which is not able to satisfy your increasing need. Then you purchase a bigger one, and need to transfer part or all the data to it.

Usually, for small size data, you can just simply transfer it with the short cut key "Ctrl+Z" and "Ctrl +V", or clicking the right-mouse button: "Copy" + "Paste". While for system file and other big size data, you need a professionaldata transfer softwareto help you achieve your goal better. Although there is no shortage of such kind of data transfer software, you don't need to fret about which one is the best. DVDFab PC Backup, a full-featured but easy-to-usePC backupsolution will satisfy all your need. It functions as both a professional data transfer software anddata cloner, which can migrate all data from one hard drive to another with just four simple steps. Following, please follow this guide to see how to make it. If you haven't got one DVDFab PC Backup,downloadone, and then according to the wizard to complete the installation. Step 1: Run DVDFab PC Backup, and opt for Clone Double click the desktop icon of DVDFab PC Backup you've successfully installed. When it runs, navigate to the upper right part of the main window, and click the Clone button.

Step 2: Select the data you want to transfer By choosing the Clone option, DVDFab PC Backup will scan and present you your current data according to the disks/partitions of your computer. You can select all, or the specific partition data you need to transfer by checking the checkboxes on, and click the Next.

Step 3: Select the target destination for storing data With the following window pop up, all the available disks/hard drives show. You are required to select one for the to-be-transferred data storing. Notice that the target disk shall be different from the disk of which the data you want to transfer. And if you choose one contains data, the original data may be overwritten.

Step 4: Begin transferring data With all things get ready, now you can take the last step. Click the Proceed button, this data transfer task will be executed immediately. And you can choose to set your computer to automatically shut down when the task is finished.

OK, done! For more information about it, please visit:http://www.dvdfab.cn/pc-backup.htm. Author Bio: Victor Han is a Social Media Marketing Specialist who loves blogging and also dedicated to share the great video tools and useful tips on data backup software.