1200A Portable Miniature I-Line Panel REV01HPS

The 1200A portable power distribution panels Series “HP” are packaged in NEMA 3R enclosure listed and certified by UL under UL1640 Portable Power Distribution Panel. CSA Standard for safety for Industrial Control Equipment, CAN/CSA C22.2 No.14 (Canada) tested by ETL. These panels are equipped with a Square-D OEM 45” interior rated for 600A 3Ø-5W 600VAC. The construction of the enclosure is 0.090” aluminum with a powder coated RAL7035 finish. The wall mount style enclosure is mounted on a stainless steel cage that provides a 360° degree overall protection from falling objects up to 15lbs at 25ft.

1200A I-Line with 8x sets of 400A Camlok Female output. Features: - Standard Pad-Lockable 0.090” aluminum enclosure NEMA 3R - Average weight fully loaded 750lbs - Heavy duty stainless steel frame with large forklift pockets - 1200A 600VAC 45” spacing I-Line interior HCP235912N - 6x removable gland plates. - Large polycarbonate window (Clear) - UL1640 Portable Power Distribution Equipment - CAN/CSA C22.2 No.14 Industrial Control Equipment

1200A Portable Miniature I-Line Panel REV01HPS

Estimated weight based on a fully loaded 1200A Portable I-Line Panel; Aluminum enclosure with carbon steel cage is 750lbs when equipped with Male 16 series Camlok [4 each] Black, Red, Blue, White and Green. Standard 45” Square-D I-line Interior model #HCP235912N; Main Load Only and the following branch breakers: 1x 400A, 2x 250A & 6x150A adjustable trip breakers.

1200A Portable Miniature I-Line Panel REV01HPS

I-LINE CIRCUIT BREAKER PANELBOARD:

1200A Portable Miniature I-Line Panel REV01HPS

1200A Portable Miniature I-Line Panel REV01HPS

BREAKER FRAME TYPE:

GENERAL: File E350898, Vol. 1, Sec. 1, USL - Portable Power Distribution Panels Series HP, HL and HB. These portable power distribution panels are constructed in accordance with the requirements found in UL 1640 and additional requirements specified on this Volume; intended to be used in concerts, festivals and similar events in accordance with Article 525 of the NEC TECHNICAL CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE’S USE): Products designated USL have been investigated using requirements contained in UL 1640, the Standard for Portable Power Distribution Equipment. The Hipower product “HP series”, Portable Power Distribution panels intended for outdoor use, in non-hazardous locations such as carnivals, fairs, festivals, concerts and similar locations in accordance with Article 525 of the NEC are also intended to be used in temporary installations at construction sites in accordance with Article 590 of the NEC. Installations of the products are to be in accordance with the National Electrical Code, NFPA70 (NEC) and the Canadian Electrical Code, Part I.

ELECTRICAL RATINGS: 1200 A max (15 A through 1200 A), 600 VAC max.

1200A Portable Miniature I-Line Panel REV01HPS

UL LISTED AND/OR CSA LABEL: Each panel is tagged with a serialized UL certified label starting with the letter “A” followed by a set of five numeric characters. This assembly number is recorded under the HIPOWER final product serial number.

ENCLOSURE RATING: NEMA enclosure standards represent an enclosure's ability to protect against the external environment. The following represent brief summaries of the NEMA standard. For the official standard, contact NEMA directly. Type 1 Intended for indoor use primarily to provide a degree of protection against (hand) contact with the enclosed equipment. Sometimes known as a "finger-tight" enclosure. This is the least costly enclosure, but is suitable only for clean, dry environments. Type 2 Intended for indoor use primarily to provide a degree of protection against limited amounts of falling dirt and water. Type 3 Intended for outdoor use primarily to provide a degree of protection against windblown dust, rain, and sleet; undamaged by ice, which forms on the enclosure. Type 3R Intended for outdoor use primarily to provide a degree of protection against falling rain and sleet; undamaged by ice which forms on the enclosure. This is the most common outdoors enclosure. Type 4 Intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose directed water; undamaged by ice which forms on the enclosure. Type 4X Intended for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose directed water; undamaged by ice which forms on the enclosure. This is the most common enclosure in "food" environments. Commonly made from stainless steel (expensive) or fiberglass (cheap). Type 6 Intended for use indoors or outdoors which occasional temporary submersion is encountered,

1200A Portable Miniature I-Line Panel REV01HPS

Type 6P Intended for use indoors or outdoors which occasional prolonged submersion is encountered; Corrosion protection. This type is recommended when extensive wash downs are performed. Type 12 Intended for use indoors to provide a degree of protection against dust, falling dirt, and dripping noncorrosive liquids. This is the most common type enclosure used in normal factory environments. Type 13 Intended for use indoors to provide a degree of protection against dust, and the spraying of water, oil, and noncorrosive coolant. UL further defines responsibilities, duties and requirements for both Manufacturers and UL representatives in the document titled, "UL Mark Surveillance Requirements" that can be located at the following web-site: http://www.ul.com/fus and in the document titled "UL and Subscriber Responsibilities" that can be located at the following website: http://www.ul.com/responsibilities. Manufacturers without Internet access may obtain the current version of these documents from their local UL customer service representative or UL field representative. For assistance, or to obtain a paper copy of these documents or the applicable Service Terms, please contact UL's Customer Service at http://www.ul.com/global/eng/pages/corporate/contactus, select a location and enter your request, or call the number listed for that location.

Raimond Castillo Sales Director Oil & Gas Division Mobile: 507.210.4641 Himoinsa Power Systems, Inc. Office: 913.495.5557 Fax: 913.495.5575 16002 W. 110th St. • Lenexa, KS 66219 www.hipowersolutions.com