WARNING: BEFORE USAGE, THE INSTRUC-TION MUST BE READ.

DO NOT POINT AT PEOPLE OR ANIMAL.GUN AND GAS MUST NOT BE PLACED IN AREA WHERE TEMPERATURE IS OVER 40 ℃

PLACE IN GUN CASE WHEN NOT IN USING OR TRANSPORTING

UNAUTHORIZED RECONSTRUCTION OF AIR SOFT GUN TO STRENGTHEN FIRING FUNCTION IS STRICTLY PROHIBITED.

DO NOT USE GAS WHICH PRESSURE IS OVER 12 Kgs/c㎡

BE CAREFULL WHAT TARGET YOU SHOOT

THANK YOU FOR PURCHASING. THE FOLLOWING ATTENTION POINTS AND IN-STRUCTIONS MUST BE READ. SHOOTING WITHOUT CAUTION OR USED IMPROP-ERLY, BLINDNESS OR INJURIES COULD BE LEAD.

EYE PROTECTION DEVICE MUST BE EQUIPPED DO NOT LOAD ANYTHING BUT BB BULLETS.

DO NOT LOOK THROUGH THE BARREL PLEASE SHOOT IN SAFE PLACE

OPERATION

1.REMOVE THE MAGAZINE

PRESS MAGAZINE CATCH AND REMOVE MAGA-ZINE

2. FILLING GAS

GAS MAG:FILL THE GAS BOTTLE TO THE MAGAZINE IN VERTICAL DIRECTOR.

GAS MAG

1

2

3

CO2 MAG

CO2 MAG:Fol low the instract ion to insert the cartridge

4 INSERT MAGAZINE

5.LOAD

PULL THE SLIDE TO LOAD

6.FIRE

PULL THE TRIGGER

7.SAFETY

PULL DOWN FOLLOWER AND LOAD BB.

SWITCH TO ON POSITION

SWITCH TO OFF POSITION

3.LOAD BB

BB

SAFETY ON

SAFETY OFF

3.REMOVE THE RECOIL SPRING AND GUIDE

TURN ADJUST SCREW ACCORDING TOTHE TREJECTORY

COUNTERCLOCKWISE

CLOCKWISE

STAY

ASSEMBLYREVERSE THE DISASSEMBLY

ADJUST TREJECTORY

2.REMOVE THE SLIDE

4.REMOVE THE BARRELDISASSEMBLY1.PULL BACK SLIDE TO THEPOSITION AND TAKE OUT THE SLIDE STOP

NO. NAME PRICE NO. NAME PRICE1 FRAME 2200 55 MAIN SP HOUSING PIN 402 SLIDE 1600 56 SEAR PIN 403 OUT BARREL 700 57 MAG LIP PIN 204 HAMMER HOUSING 300 58 HAMMER SP GUIDE PIN 205 MAIN SP HOUSING 300 59 MAG BOTTOM PIN 206 TRIGGER HOUSING 300 60 TRIGGER BAR PIN 207 SEAR 80 62 MAG STAB (CO2) 1008 HAMMER 300 62-2 STAB O-RING 209 TRIGGER 300 63 MAG BASE NUT (CO2) 100

10 TRIGGER BAR 200 64 TRIGGER SP 3011 DISCONNECTOR 100 65 SEAR SP 3012 SAFETY 200 66 TRIGGER BAR SP 3013 SLIDE STOP 200 67 MAG CATCH SP 3014 SAFETY DETENT PLUNGER 60 68 VALVE KNOCKER SP 3015 PISTON BLOCK 400 69 VALVE LOCK SP 3016 BARREL CHAMBER (L) 160 70 SLIDE STOP SP 3017 BARREL CHAMBER (R) 160 71 SAFETY SP 3018 TRAJECTORY ADJUST SCREW 120 72 RECOIL SP 6019 FRONT RING 120 73 MAIN SP 6020 MAGAZINE CATCH 200 74 MAIN SP CAP 4021 MAIN SP STRUT 60 75 FLOATING VALVE 2022 RECOIL SP GUIDE 400 76 PISTON BLOCK SCREW 2023 VALVE HAMMER 120 77 MAG CATCH SP SCREW 2024 VALVE KNOCKER 240 78 BARREL CHAMBER SCREW 2025 VALVE LOCK PLATE 120 79 EX VALVE 18026 MAG BODY (GAS) 450 80 FILLING VALVE 8027 MAG BASE (GAS) 200 81 FOLLOWER SP 6028 MAG BODY (CO2) 450 82 HAMMER PIN DETENT 4029 TRAJECTORY ADJUST RING 160 83 MAG CATCH SP WASHER 3030 GRIP (L) 400 84 FRONT SIGHT 20031 GRIP (R) 400 84-1 OPTICAL FIBER 3032 CYLINDER 180 86 MAIN SP HOUSING SLEEVE 15034 MAG LIP 80 87 TRIGGER HOUSING PIN 2035 FLOATING VALVE 30 88 MAG BOTTOM O-RING 3036 MAG FOLLOWER 40 89 CO2 EX VALVE 24037 MAG BOTTOM 140 89-5 CO2 EX VALVE O-RING(BIG) 2038 MAG BOTTOM STOP 30 90 MAG BOTTOM STOP SCREW 2039 MAG GASKET 100 92 CYLINDER SP 3040 RUBBER CHAMBER 100 93 TRAJECTORY ADJUST SCREW 2041 PISTON RING 60 94 PISTON SCREW 1042 RECOIL BUFFER 120 109 PISTON BLOCK PLATE 20043 INNER BARREL 300 110 SAFETY RIGHT 20044 HAMMER PIN 80 112 FRONT SIGHT PIN 2045 HAMMER SLEEVE 60 113 TRIGGER ADJUST SCREW 2046 TRIGGER PIN 60 140 REAR SIGHT BASE 14047 TRIGGER SLEEVE 60 142 REAR SIGHT 14048 FLOATING VALVE PIN 30 143 REAR SIGHT ADJUST SCREW 6049 DISCONNECTOR PIN 30 144 REAR SIGHT SPRING 3050 VALVE KNOCKER PIN 40 145 MAG CATCH PLATE 10051 VALVE KNOCKER SLEEVE 40 154 REAR SIGHT PLATE 6052 VALVE HAMMER PIN 40 155 MAG CATCH PLATE SCREW 6053 BARREL LOCKING PIN 80 156 REAR SIGHT SCREW(EACH) 2054 GRIP SCREW 80

KJWORKS

SHADOW-2MANUAL

V1 20190118

KJWORKS

Kjworks No.12 Lian-Ming 1st Street,Bade City,Taoyuan county,Taiwan Tel:03-3749793 Fax:03-3618130 e-mail:kjworks@ms47.hinet.net

www.kjworks.com.tw