th International Conference on Industrial Tribology (ICIT ... · PDF fileCONTACT MECHANISM AND FRICTION ... Rotary Kiln Srikant Inje, ... Torsional stiffness analysis of a vertical

Page 1 of 25

HI-TEAAuditorium Foyer, 1100 – 1130 Hrs

7th International Conference on Industrial Tribology (ICIT 2010)December 2-4, 2010

Ispat Bhawan, RDCIS, SAIL, Ranchi

PROGRAMME

Welcome AddressChairman (Organizing Committee)Invocation SongChildren of Delhi Public School, RanchiLighting of lampChief Guest with other dignitaries on daisAddressPresident (TSI)AddressGuest of HonourInaugural AddressChief GuestRelease of Proceedings & SouvenirChief GuestTheme Lecture: Role of third bodies in protective coatingsDr Irwin L Singer, Physicist, Naval Research Lab, USAVote of ThanksCo-Chairman (Organizing Committee)Inauguration of Exhibition & Poster SessionChief Guest

INAUGURAL SESSIONMain Auditorium, 0900 – 1100 Hrs

December 02, 2010 (Thursday)

RegistrationAuditorium Foyer

December 1, 2010 1500 – 1800 HrsDecember 2, 2010 0800 – 0900 Hrs & 1100 Hrs onwards

Page 2 of 25

Paper-1Tribology of a light weight engine alloyProf. SK BiswasIndian Institute of Science, Bangalore, India

Paper-2Tribology Practices in Steel IndustryC MishraCEO (ME&TC) & Former GM (Tata Steel), Jamshedpur, India

Paper-3Tribological Behaviour of Engineered CoatingsDr. G. SundararajanDirector (ARCI), Hyderabad, India

PLENARY SESSIONMain Auditorium, 1130 – 1300 Hrs


LUNCHGround Floor, RDCIS, 1300 – 1400 Hrs

Page 3 of 25

TRIBOLOGY IN STEEL PROCESSING

Keynote PaperIncreasing Efficiency & Productivity of Steel Plants Through Proper LubricationNaveen ShuklaExxon Mobil (STLE, USA, Representative)Oral Paper-1Root cause failure analysis of spiral bevel gear box of NTM stand #18 of Wire RodMill at Tata SteelRajesh Mishra, H S Mandal, Dr. Anand Prabhakaran, Vivek Kudva and G.R.P. SinghTATA STEEL, Jamshedpur, Jharkhand, IndiaOral Paper-2Key Performance Index of Emulsion System at Tandem Cold MillAK Marik, N Mondal, P Pathak, AP Singh, DS Gupta, Ram Avatar and D MukerjeeResearch & Development Centre of Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-3An insight into selection of material for improving wear resisting performance ofsteel plant mechanical equipmentsP.K.Swain, S. R.Mohapatra, P.K.Mohanty and Anil BarikRourkela Steel Plant, SAIL, Orissa, IndiaOral Paper-4A conceptual framework for developing an expert system for selection oftribological materials for steel plant applicationsK.K. Singh, R.R. Prasad, Dr. Ram Avtar and Dr. D. MukerjeeResearch & Development Centre for Iron and Steel, SAIL, Ranchi, Jharkhand, India

TECHNICAL SESSION – IAVenue: Main Auditorium, 1400 – 1545 Hrs


Page 4 of 25

TRIBOLOGY IN MINING

Keynote PaperImprovement in availability of underground loading machines by use ofadvanced fire resistant hydraulic fluid – a case study from coal minesR K Saha, and M I AlamCCMC, CCL, Ranchi, Jharkhand, IndiaOral Paper-1Typical un-lubricated wear in HEMM & techno-economic solutions through itssurface conditioning - a case study from South Eastern Coalfields Ltd.A.K.Mishra, l.R.Suryawanshi, Kamal Mukherjee, S.Kumar and P. KumarCEWS, Gevra, South Eastern Coalfields Ltd., Bilaspur, Chhatisgarh, IndiaOral Paper-2Reliability assessment of tribological failures helps to suggest better maintenancepolicy for HEMM – a case study of 85 t dumpers from an open cast mineKamal Mukherjee*, R.K.Darad** and D.Kabiraj****CEWS, Gevra, SECL, Bilaspur, Chhatisgarh, India, ** CRS,Barkakana, CCL, Ranchi,Jharkhand, India, *** Rajrappa OCP, CCL, Ranchi, Jharkhand, IndiaOral Paper-3Effect of temperature on dynamic characteristics of MR fluid squeeze filmdampersH.P.Jagadish, L.Ravikumar and G.SaravanakumarBMS Evening College of Engineering, Bangalore, Karnataka, IndiaOral Paper-4Terocote protection on wear prone components utilized in Mining IndustryP.Sasi AnandEWAC Institute, Larsen & Toubro, Mumbai, Maharashtra, India

TECHNICAL SESSION – IBCommittee Room, 1400 – 1545 Hrs


Page 5 of 25

ENGINE TRIBOLOGY

Keynote PaperAutomotive Engine oils – trends, issues and significanceR SureshIndian Oil Corporation Limited, Mumbai, Maharashtra, IndiaOral Paper-1Study of friction characteristics of a diesel engine running on different viscositygrade engine oils using conventional and acoustic emissions techniqueD.Singh*, F.Elamin*, F.Gu*, O.Gilkes*, J.D.Fieldhouse*, A.K.Jain**, Nishan Singh** andS.K.Singal***University of Huddersfield, School of Computing and Engineering, UK and **IndianInstitute of Petroleum, Dehradun, CSIR, IndiaOral Paper-2Interpretation & analysis of 15W40 grade engine oil viscosity – a case study of 85ton dumper applications in open cast mineD.Kabiraj* and Kamal Mukherjee***Central Coalfields Limited, Ranchi, Jharkhand, India, **South Eastern CoalfieldsLimited, Bilaspur, Chhatisgarh, IndiaOral Paper-3Studies for the development of energy efficient top compression piston ring for ICenginesR.K.Pandey, N.Tandon and T.K.SambharwalIIT, Delhi, New Delhi, IndiaOral Paper-4Variation in lubrication regime for changes in ring geometry in a multi cylinder ICengine test rigGanesh B. Aware, B. M. Sutaria and D. V. BhattS.V.National Institute of Technology, Surat, Gujarat, India

TECHNICAL SESSION – ICSeminar Room, 1400 – 1545 Hrs


TEA BREAKAuditorium Foyer, 1545 – 1600 Hrs

Page 6 of 25

TRIBOLOGY IN METAL WORKING

Keynote PaperTribological investigations during precision forging of hollow polygonal discDr. Surender Kumar and Vikas KumarGLA Institute of Technology & Management, Mathura, U.P., IndiaOral Paper-1Roll bite lubrication, benefits and future directionPeter GandyQuaker Chemicals, AustraliaOral Paper-2Improvement in lubrication system in backup roll bearings in System- A ofTandem Mill - 2 of Bokaro Steel PlantK.K. Ojha*, Rakesh*, D Kumar* and A K Mishra *** Bokaro Steel Plant, SAIL, Bokaro, Jharkhand, ** Research and Development Centrefor Iron & Steel, SAIL. Ranchi, Jharkhand, IndiaOral Paper-3Managing roll life in hot rollingRajeev Baskiyar, Binod Krishna, Daya Shanker Gupta and Ram AvtarR&D Centre for Iron and Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-4Optimization of roll cooling parameters using finite difference method at Plate Mill,RSPS. K. Thakur*, S. Rath*, A. K. Marik*, P. K. Prusty*, A. P. Singh*, N. K. Khuntia** andP. K. Mishra***Research & Development Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, India,**Rourkela Steel Plant, SAIL, Rourkela, Orissa, India

TECHNICAL SESSION – IIAMain Auditorium, 1600 – 1745 Hrs


Page 7 of 25

CONTACT MECHANISM AND FRICTION

Keynote PaperAluminium fly ash and SiC metal matrix composite and its wear behaviorK. V. Mahendra *, M. Ramachandra ** and K. Radhakrishna ***RR Institute of Technology, Chikkabanavara, Bangalore, Karnataka, India and ** B.M.S.College of Engineering, Bangalore, Karnataka, IndiaOral Paper-1A study on the potential of bagasse fiber reinforced polymer composite fortribological applicationsPunyapriya Mishra, S.K.AcharyaNational Institute of Technology, Rourkela, Orissa, IndiaOral Paper-2Friction wear performance of injection molded asymmetric gearsRatna Kumar Kommogi, M.S.S. Santosh Kumar, Prateek Kumar and S. SenthilvelanIndian Institute of Technology, Guwahati, Assam, IndiaOral Paper-3Transient thermo elastic analysis of volvo disk brakeChiranjit Sarkar* and Harish Hirani*** Machine Dynamics & Maintenance Engineering Centre, IIT Delhi, New Delhi, India, **Mechanical Engineering Department, IIT Delhi, New Delhi, IndiaOral Paper-4Debottlenecking of coil yard operationL. Sreenivas Rao and Vishnu Raj KharcheJSW Steels, Bellary, Karnataka, India

TECHNICAL SESSION – IIBCommittee Room, 1600 – 1745 Hrs


Page 8 of 25

DESIGN AND MANUFACTURING

Keynote PaperTribology aspects in design and manufacturing specific to nuclear facilitiesN.L.SoniFluid Power & Tribology, BARC, Trombay, Mumbai, IndiaOral Paper-1Study of wear characteristics of Lechler roll cooling nozzleSudhaker Jha, Suresh Vasani and Santosh ChackoLechler (India) Pvt. Ltd., Thane, Maharashtra, IndiaOral Paper-2Influence of Rim Thickness on the Tooth Bending Stress of Girth Gear used inRotary KilnSrikant Inje, Gajanan Nirwal, Dr. Barun Chakrabarti and S.V. HerwadkarLarsen & Toubro Limited, Mumbai, Maharashtra, IndiaOral Paper-3Lubrication system design of a wind turbine gearbox using system levelsimulation to improve performancePradip Subramaniam and Mayank TiwariGE India Technology Centre, GRC, Bangalore, Karnataka, IndiaOral Paper-4Temperature-displacement coupled modeling for disc brakesRamkumar.E and Mayuram.M.MIIT Madras, Tamilnadu, India

TECHNICAL SESSION – IICSeminar Room, 1600 – 1745 Hrs


CULTURAL PROGRAMME & DINNERAuditorium & Community Hall, 1900 – 2300 Hrs

POSTER SESSIONAuditorium Foyer, 1030 – 1730 Hrs

(List of papers given at the end)

Page 9 of 25

BEARING AND GEAR LUBRICATION- I

Keynote PaperAnand N BapatNational Engineering Industries Ltd., Jaipur, IndiaOral Paper-1Endurance life testing of indigenously developed high precision M50 SteelbearingsS. Madhu Kiran, M. Solai Raju, N. Rajaram, M. Tamilmani, S. Ganesan and C.ChandrasekaranCombat Vehicles Research and Development Establishment, DRDO, Chennai, IndiaOral Paper-2Torsional stiffness analysis of a vertical hydro generator tilting pad thrust bearingDuriseti.V. SrikanthBhaskar Engineering College, Moinabad, Hyderabad, Andhra Pradesh, IndiaOral Paper-3Study of lubrication aspects of journal bearing failure in a sugar millS. M. Muzakkir*, Harish Hirani*, G. D. Thakre** and M. R. Tyagi***Indian Institute of Technology, Delhi, India and **Indian Institute of Petroleum, Dehradun,Uttarakhand, IndiaOral Paper-4Tribological Studies on Aluminium-Tin-Silicon Based Plain Bearing MaterialT Rameshkumar*, Dr I Rajendran** and A D Latha***

*Bannari Amman Institute of Technology, Sathyamangalam, Tamilnadu, ** DrMahalingam College of Engineering & Technology, Pollachi, Tamilnadu, ***NandhaEngineering College, Perundurai, Tamilnadu

TECHNICAL SESSION – IIIAMain Auditorium, 0900 – 1045 Hrs

December 03, 2010 (Friday)

Page 10 of 25

SURFACE TREATMENT AND COATINGS

Keynote PaperApplication of high performance abrasion resistant materials in hammers andscreens for coal and coke preparation units of integrated steel plantRam Avtar, R.K.Tiwary and A.S.MathurResearch & Development Center for Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-1High Temperature Abrasion and Erosion of Hard Faced SurfacesManish RoyDefence Metallurgical Research Laboratory, Hyderabad, Andhra Pradesh, IndiaOral Paper-2Genesis of furnace roll pick up and functional requirements for roll coatingS K Mohapatra, A P Singh, D S Gupta and Ram AvtarR & D Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-3Tribological performance optimization of electroless Ni-B coating using greybased taguchi methodSuman Kalyan Das*, Prasanta SahooJadavpur University, Kolkata, West Bengal, IndiaOral Paper-4Improving Wear Performance of Primary Zone Equipments of Steel Plant throughSurface EngineeringB.S.Sahu, Gopichand, S.C. Sabat, Anil BarikRourkela Steel Plant, SAIL, Orissa, India

TECHNICAL SESSION – IIIBCommittee Room, 0900 – 1045 Hrs


Page 11 of 25

TRIBO TESTING

Keynote PaperSimulating aluminium cold rolling mill conditions on a standard bench-topinstrumentRichard BakerPCS Instruments, London, UKOral Paper-1Performance study of a shock absorber on a inhouse developed test rigSatish Purohit*, S.R.Lapalikar** and R.K.Porwal**SG Institute of Technology and science, Indore, M.P, India and **Indore Institute ofTechnology and science, Indore, M.P., IndiaOral Paper-2Experimental determination of traction coefficient under starved lightly loadedrolling non-conformal line contact conditionsN. Anandan* and R.K. Pandey**

*Pondicherry Engineering College, Puducherry, India and **Indian Institute of Technology,New Delhi, IndiaOral Paper-3A Rig Test and Novel Approach to Predict Friction and Wear of Piston Ring andCylinder Liner Tribo PairM.M.Mayuram, A. Hemasundararao and A.RamanaiahDepartment of Mechanical Engineering, IIT Madras, Chennai, IndiaOral Paper-4Measurement of interfacial frictional forces during compressive deformation ofAl-MMC foamJ. Ghose*, V. Sharma* and S. Kumar**

*Birla Institute of Technology, Mesra, Ranchi, Jharkhand, India and **G.L.A. Institute ofTechnology & Management, Mathura, U.P., India

TECHNICAL SESSION – IIICSeminar Room, 0900 – 1045 Hrs


VISIT TO EXHIBITION & TEAAuditorium Foyer, 1045 – 1130 Hrs

Page 12 of 25

Presentation-1Shell India MarketingJason Cao, Shell Global Solutions, China

Presentation-2CSM InstrumentsGregory Favaro, CSM Instruments, France

Presentation-3Welding Alloys AsiaS Ghosh, Welding Alloys South Asia Pvt. Ltd., Navi Mumbai, India

MANUFACTURER’S PRESENTATION SESSION – IMain Auditorium, 1130 – 1300 Hrs



Page 13 of 25

Presentation-1Raj Petro SpecialitiesAmit Nanavati, Raj Petro Specialities Pvt. Ltd., Chennai, India

Presentation-2PCS InstrumentsRichard Baker, PCS Instruments, London, UK

Presentation-3Indian Oil Corporation Ltd.

MANUFACTURER’S PRESENTATION SESSION – IIMain Auditorium, 1400 – 1530 Hrs



Page 14 of 25

WEAR MECHANISM

Keynote PaperSub-surface strain hardening during sliding wear of Ni-Cr-Mo-V steel with respectto different microstructuresDr D. RaiRDCIS, SAIL, Bhadrabati Centre, Bhadrabati, Karnataka, IndiaOral Paper-1Tribological behaviors of Leaded Phosphor Bronze under dry and water lubricatedconditionsNeelima Khare, P.K.Limaye, N.L.Soni, M.K.Mishra and D.N.BadodkarBARC, Trombay, Mumbai, Maharashtra, IndiaOral Paper-2Friction and wear performance of dry lubricants under boundary lubricationregimeAravind Vadiraj*, M. Kamaraj** and Sreenivasan V. S.*,*Ashok Leyland Technical Center, Vellivoyalchvadi, Chennai, Tamilnadu, India**IIT Madras, Chennai, Tamilnadu, IndiaOral Paper-3Study of wear of EN-31 steel under unlubricated conditionsM.R. Tyagi*, G.D. Thakre*, Navdeep S. Chahal** and Kulwant S. Dhanoa**

* Indian Institute of Petroleum (CSIR), Dehradun, Uttarakhand, India, ** National instituteof Technology, Jalandhar, Punjab, IndiaOral Paper-4Wear characterization of austempered ductile ironP.K. Bandyopadhyay, S.K. Sen and D. MukherjeeResearch and Development Centre for Iron and Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-5Improved life of conveyer idlerManoj KumarJyoti Cerro Rubber, Jamshedpur, Jharkhand, India

TECHNICAL SESSION – IVAMain Auditorium, 1545 – 1730 Hrs


Page 15 of 25

BEARING AND GEAR LUBRICATION - II

Keynote PaperA “systems approach” for performance evaluation of open gear lubricantsDr. Barun Chakrabarti and S. V. HerwadkarR&D – E&C Division, Larsen & Toubro Limited, Mumbai, Maharashtra, IndiaOral Paper-1Experimental determination of traction coefficient under starved lightly loadedrolling non-conformal line contact conditionsVikas M. Phalle, Satish C. Sharma and C. JainIndian Institute of Technology, Roorkee, Uttarakhand, IndiaOral Paper-2Increase in life expectancy of work roll bearings in Tandem Mill II of Bokaro SteelPlantA.K. Mishra*, G Bhattacharya** and KK Ojha*** Research and Development Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, India,** Bokaro Steel Plant, SAIL, Bokaro, Jharkhand, IndiaOral Paper-3Influence of journal misalignment and wear on the performance of constant flowvalve compensated non-recessed hybrid journal bearing operating in turbulentregimeNathi Ram, Satish C. Sharma and S.C. JainIndian Institute of Technology, Roorkee, Uttarakhand, IndiaOral Paper-4“Planetary Gear Drives” – Overview of Energy Efficient Drives for Sugar MillApplicationS. R. DurugkarR&D – E&C Division, Larsen & Toubro Limited, Mumbai, Maharashtra, India

TECHNICAL SESSION –IVBCommittee Room, 1545 – 1730 Hrs


Page 16 of 25

BIO TRIBOLOGY

Keynote PaperRecent advancements in development of biodegradable greasesRanjit Panesar*, Dr. J. Bhatia** and Sukumar Mahanti***Proventus (UK) Ltd., Leeds, United Kingdom, **Raj Petro Specialities Pvt. Ltd. ChennaiOral Paper-1Tribocorrosion assessment of biomedical alloys: influence of chemical andelectrochemical parametersStefano Mischler, C. Stähli, J. Stojadinovic,EPFL, Station 12, CH-1015 Lausanne, SwitzerlandOral Paper-2Study of lubricity characteristics of non-edible vegetable based bio-lubricant andlow SAP engine lubricantsDevendra Singh, A.K.Singh, Nishan Singh and S.K.SingalIndian Institute of Petroleum, Dehradun, CSIR, Uttarakhand, IndiaOral Paper-3Comparison of sliding tribocorrosion and fretting corrosion behavior of Ti-13Nb-13Zr in physiological solutionN.S. More*, S.N. Paul**, N. Diomidis***, S. Mischler*** and Manish. Roy****

*RC Patel Institute of Technology, Shirpur: 425 005, Maharashtra, India, **VisvesvarayaNational Institute of Technology, Nagpur, Maharashtra, India, *** EPFL, Station 12, CH-1015 Lausanne, Switzerland, ****Defence Metallurgical Research Laboratory, Hyderabad,Andhra Pradesh, IndiaOral Paper-4Studies on Cup Profile Thickness variation of Deep Drawn 304L Sheets usingGreen LubricantsS.R.Jayaram and Y.M.ShashidharaMalnad College of Engineering, Hassan, Karnataka, India

TECHNICAL SESSION –IVCSeminar Room, 1545 – 1730 Hrs


CULTURAL PROGRAMME & DINNERCommunity Hall, 1900 – 2300 Hrs


(List of papers given at the end)

Page 17 of 25

CONDITION BASED MAINTENANCE SYSTEM (CBMS)

Keynote PaperCondition monitoring and reliability analysis of rolling-element bearingsDr. HarprasadConsultant, Centre for Tribology (CETR), USAOral Paper-1Detection of bearing fault for equipment running at slow speedChiranjan Mandal*, Ravi Ranjan Prasad*, Arun Kumar Samantaray** and RanjanBhattachayya***R & D Centre fot Iron & Steel, SAIL, Ranchi, Jharkhand, India, **IIT Kharagpur, WestBengal, IndiaOral Paper-2Oil analysis program as a tool for continued airworthiness assurance ofaeroenginesAmarnath Kosgi and S K JhaCentre for Military Airworthiness and Certification, Ministry of Defence (R&D), Bangalore,Karnataka, IndiaOral Paper-3An improved bearing condition monitoring technique for online fault stimulationAmandine Bernier and S. SwarnamaniIIT Madras, Tamilnadu, IndiaOral Paper-4Integration of Acoustic Emission technique and Oil analysis for conditionmonitoring of super slow rotating machineriesAlok Kumar Mukherjee, Nitesh Ranjan and Banibrata MukherjeeBokaro Steel Plant, Steel Authority of India Limited, Bokaro, Jharkhand, IndiaDevelopment of condition monitoring system for rolling stands of Rail Mill,Bhilai Steel PlantOral Paper-5Deepak Kumar*, Anup Prasad*, Vikas Kumar*, Archana Sharan*, R Pawar**,Prashant Lakhe**, Usha Rani*, S Majumdar* and S R Singh***R& D Centre for Iron & Steel, Steel Authority of India Limited, Ranchi, Jharkhand, India **Bhilai Steel Plant, Steel Authority of India Limited, Bhilai, Chhattisgarh, India

TECHNICAL SESSION – VAMain Auditorium, 0900 – 1100 Hrs

December 04, 2010 (Saturday)

Page 18 of 25

LUBRICANTS AND ADDITIVES

Keynote PaperMolecular engineering of a high performance synthetic base stocks byspectroscopic techniquesA. S. SarpalIOCL, Research & Development Centre, Sector-13, Faridabad, Haryana, IndiaOral Paper-1Steel plant lubrication trends - experiences at Tata SteelG.R.P. Singh and B.K. DasTata Steel, Jamshedpur, Jharkhand, IndiaOral Paper-2Studies on the effect of cerium oxide nanoparticle as an anti-wear lubricantadditive using Taguchi TechniqueShyam K Sharma, Arun K Nirala and S. KanagarajIndian Institute of Technology, Guwahati, Assam, IndiaOral Paper-3Attempts towards addressing the customer demands in drawing lubricantsP.V. Joseph, Deepak Saxena, Pankaj Bhatnagar, R.T. Mookken, K.P. Naithani and R.K.MalhotraIOCL, Research & Development Centre, Sector-13, Faridabad, Haryana, IndiaOral Paper-4Performance study of an eco-friendly roll pass lubricantDr. M.L.Das*, M.C.Dash*, Dr. B.Ghosh*, K.Gopinathan*, D.S.Gupta** and KundanPrakash***Balmer Lawrie & Co. Ltd, Kolkata, West Bengal, India and ** R&D Centre for Iron & Steel,SAIL, Ranchi, Jharkhand, IndiaOral Paper-5Disposal of Lubricating Oil Sludge by Bioremediation at Bokaro Steel PlantDarshan Keshari*, Subrat Kumar Panda**, H.K. Ganguly***, Dr. M.P. Singh**** and Dr.Manoj Upreti*****IOCL,Bokaro, Jharkhand, India, **IOCL, Bihar State Office, Bihar, India, ***IOCL, CTSM,Mumbai, Maharashtra, India, ****IOCL, R&D Centre, Faridabad, Haryana, India

TECHNICAL SESSION – VBCommittee Room, 0900 – 1100 Hrs


Page 19 of 25

COMPUTATIONAL TECHNIQUES IN TRIBOLOGY

Keynote PaperDang-van fatigue life model for porous steelsN. GovindarajanTATA Consultancy Services Ltd., SIPCOT IT Park, SEZ, Siruseri, IndiaOral Paper-1Artificial Neural Network modeling of fractal dimension in CNC milling of mildsteel material and comparison with RSMT. K. Barman and P. SahooJadavpur University, Kolkata, West Bengal, IndiaOral Paper-2Estimation of coefficient of friction of cold rolling oil emulsion using mill data andDEFORM softwareS.Rath, A.K.Marik, P.Pathak, A.P.Singh, D.S.Gupta and Ram AvtarResearch & Development Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaOral Paper-3Optimization of friction performance of Al-5%SiC metal matrix composite usingTaguchi MethodShouvik Ghosh, Rabindra Behera, Goutam Sutradhar and Prasanta SahooJadavpur University, Kolkata, West Mengal, IndiaOral Paper-4Finite element based unloading of a deformable sphere loaded against a rigid flat– effect of varying material propertiesBiplab Chatterjee and Prasanta SahooJadavpur University, Kolkata, West Bengal, IndiaOral Paper-5Fault diagnosis of rolling element bearings using artificial neural networks andself organizing maps using complex morlet waveletP. K. Kankar, Satish C. Sharma and S. P. HarshaIndian Institute of technology, Roorkee, Uttarakhand, India

TECHNICAL SESSION – VCSeminar Room, 0900 – 1100 Hrs



Page 20 of 25

Welcome address

Brief of ICIT 2010

Panel Discussion

ICIT Awards

TSI Life Time Achievement Awards

Valedictory Address

Vote of thanks

CONCLUDING SESSIONMain Auditorium, 1115 – 1245 Hrs



Page 21 of 25

P01A capillary compensated hole-entry hybrid misaligned journal bearing operating inturbulent regimeNathi Ram, Satish C. Sharma and S.C. JainIndian Institute of Technology, Roorkee, Uttarakhand, IndiaP02Comparative study of wear behavior of AISI 1040 and AA 6061 with boric acid assolid lubricantS.L. Dinesh and S.R. JayaramMalnad College of Engineering, HASSAN, Karnataka IndiaP03Wear characterization of lantana-camara fiber reinforced epoxy composites inmulti-pass abrasive wear applicationsChittaranjan Deo*, S.K.Acharya* and Chandrakanta Mishra**

*NIT, Rourkela, Orissa, India, **SIET, Dhenkanal, Orissa, IndiaP04Wear control in hot rolling rolls through improved roll cooling technology in HotStrip Mill, Bokaro Steel PlantN. Mondal, P. Pathak, A. K. Marik, A.P.Singh, D.S. Gupta , A.K.P. Singh and Ram AvtarResearch and Development Centre for Iron and Steel, SAIL, Ranchi, Jharkhand, indiaP05Mechanism of roll pass wear in shape rolling and measures to improve roll passlife in SAIL long product millsS.Dutta, R.Topno, S.K.Jha, S.Kumar, B.Krishna and D.S.GuptaR & D Centre for iron & Steel, SAIL, Ranchi , Jharkhand, IndiaP06Multicylinder IC engine performance studies under different lubricants- a casestudyGanesh B. Aware, Atul S. Shah, B. M. Sutaria and D. V. BhattS.V.National Institute of Technology, Surat, Gujarat, IndiaP07Water: An eco friendly medium for fluid power systemsSaurabh B. Pandharikar and N. L. SoniBhabha Atomic Research Centre, Mumbai, Maharashtra, IndiaP08Field evaluation of heavy duty broaching oilS. Paul, S. Arunagirisamy, J.N. Pandey, D. Saxena, R.T.Mookken , K.P. Naithani andR.K. MalhotraIOCL, Research & Development Centre, Faridabad, Haryana., India


December 02 and December 03, 2010 (Thursday and Friday)

Page 22 of 25

P09Vibration signature analysis of rolling element bearing due to defectsS. H. Upadhyay *, S. C. Jain** and S. P. Harsha***Sardar Vallbhbhai Patel Institute of Technology, Vasad, Uttarakhand, India and **IndianInstitute of Technology, Roorkee, Uttarakhand, IndiaP10Integrated monitoring system for reliability improvement of HEMM withindigenously developed software – a case study on 120t, rear dump truck of southeastern coalfields limitedK K Varma and G K DwivediGevra , Korba, Chattishgarh, IndiaP11Oil condition monitoring techniques for extending life of lubricant and criticalmachines in steel plantR.B.Choudhary, A.K.Mishra and R.R.PrasadResearch and Development Centre for Iron and Steel, SAIL, Ranchi, Jharkhand, IndiaP12Study on effect of roll bite lubrication on rolling parameters of hot strip millP Pathak*, N Mondal*, AK Singh**, SK Jha***, AP Singh*, DS Gupta* and R Avtar*

*RDCIS, SAIL, Ranchi, Jharkhand India, **Bokaro Steel Plant, SAIL, Bokaro, Jharkhand,India, ***Birla Institute of Technology, Ranchi, Jharkhand, IndiaP13Life enhancement of roll bending and balancing cylinders in Tandem Mill-II ofBokaro Steel PlantRakesh*, P.Pathak**, K.K.Ojha* and N.Mondal**Bokaro steel Plant, SAIL, Bokaro, Jharkhand, India, Research & Development Centre foriron & Steel, SAIL, Ranchi, Jharkhand, IndiaP14Experimental investigation of lives of ball bearings at higher level of reliabilitiesN. C. MurmuCentral Mechanical Engineering Research Institute, Durgapur, West Bengal, IndiaP15Production and quality control of rim quenched and tempered wear resistantwheels at Durgapur Steel PlantD. K. Jain, S. K. Jha and D S GuptaResearch & Development Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaP16Condition Monitoring of Hydraulic Systems for Heavy Earth Moving Machines(HEMM) used in Open Cast MinesKamal MukherjeeCEWS, Gevra, South Eastern Coalfields Ltd., Bilaspur, Chhattisgarh, IndiaP17Tribological and radiation evaluation of natural PEEKNeelima Khare, P.K.Limaye and N.L.SoniBARC, Trombay, Mumbai, Maharashtra, India


Page 23 of 25

P19A multi asperity model for contact between a smooth sphere and a rough flat inpresence of adhesionAnirban Mitra, Prasanta Sahoo and Kashinath SahaJadavpur University, Kolkata, West Bengal, IndiaP20Effect of stacking sequence on the erosive wear behaviour of jute and jute-glassfabric reinforced epoxy composite S.K.Acharya*,B.C.Patel** and D.Mishra***

*National Institute of Technology, Rourkela, Orissa, India, **SEC, Sundargarh, Orissa,India, ***VSSUT, Burla, Sambalpur, Orissa, IndiaP21Prevention of wear by surface modificationDr. Surender KumarGLA Institute of Technology, Mathura, U.P., IndiaP22Enhancing efficiency of Circular Hot Saw in Rail and Structural MillKundan Prakash*, D.S. Gupta**, Sanjeev Kumar**, S.K. Jha** and A.V. Kamlakar****R&D Centre for Iron & Steel, SAIL, Bhilai Centre, Bhilai Steel Plant, Bhilai-49000,**R&D Centre for Iron & Steel, SAIL, Ranchi-834002, ***Rail & Structural Mill, BhilaiSteel Plant, SAIL, Bhilai-490001P23Numerical studies for the combined use of oils and emulsions in the cold rollingof metallic stripsR.K.PandeyIIT Delhi, New Delhi, IndiaP24Characterization of self-assembled monolayers (SAMS) of lubricant additivesystems on steel surfaces – VT grazing angle IR studiesM. I. S. Sastry, Gaurav Kala, V. Kagdiyal and A. S. SarpalIOCL, Research & Development Centre, Faridabad, Haryana, IndiaP25Tribological conceptual ranking of automotive engine oilM.T.Patel , B. M. Sutaria and D. V. BhattSardar Vallabhbhai National Institute of Technology, Ichchhanath, Surat, Gujarat, IndiaP26Wear characterisation of vanadium micro-alloyed railS K Jha, S Kumar, K Prakash, Dr. A K Mishra and D S GuptaResearch & Development Centre for Iron & Steel, SAIL, Ranchi, Jharkhand, IndiaP27Experimentation for finding the frictional torque of high precision deep grooveball bearingsN.Rajaram, S.Madhu Kiran, M.Solai Raju, M.Tamilmani, S.Ganeshan andC.ChandrasekharanCombat Vehicles Research & Development Establishment, DRDO, Chennai, India


Page 24 of 25

P28Tribology – Fundamental aspects of friction, wear and lubricationA.N.Jha and S.C.VishwakarmaCCL, Ranchi, Jharkhand, IndiaP29Accelerated life testing of high speed deep groove ball bearingsM.Solai Raju, N.Rajaram, S.Madhu Kiran, M.Tamilmani, S.Ganesan andC. ChandrasekaranCombat Vehicles Research and Development Establishment, DRDO, Chennai,Tamilnadu, IndiaP30Evaluation of Deep drawing Oil Using a Four Ball Tribo-testerB. D. Bachchhav*, Dr. H. Bagchi* and Dr. (Mrs.) Geeta Lathkar**

*Sinhgad College of Engineering, Pune, Maharashtra, india and **MGM’s College ofEngineering, Nanded Maharashtra, indiaP31Conceptual Design of MR BrakeChiranjit Sarkar, Dr. Harish Hirani, IIT Delhi, New Delhi, IndiaP32Performance evaluation of a hydrodynamic tilting pad thrust bearing used in acoal pulverizerSrikant Inje, Naveen Kurandwad, Dr. Barun Chakrabarti and S.V. HerwadkarLarsen & Toubro Limited, Mumbai, Maharashtra, IndiaP33Tribological Performance Analysis of Polymer Composite Bearing MaterialsPrasad M PatareSRES College of Engineering, Kopargaon, IndiaP34Global Challenges Related to the Use of Biofuels and Tribological IssuesPinaki Mondal*, U. D. Bhanagale* and Dinesh Tyagi***International Center for Automotive technology, IMT, Manesar, Gurgaon, U.P, IndiaP35Erosion pattern of materials in rotating slurry pot testing machine: a critical studyMeraj Ahmed, A.K.Majumder, A.K.Jha and Ranjana BathamAdvanced Materials and Processes Research Institute (CSIR), Bhopal, IndiaP36Improved design of tilting - pad thrust bearing for the operation of reversibility inlarge motorsB. Ravi*, T.G. Rajaswamy**, B. Balu Naik and G. SuryaprakashRao**SBIT, Khammam, Andhra Pradesh, India; **Maheswara Engineering College,Hyderabad, Andhra Pradesh, India ***JNTUH, Hyderabad, Andhra Pradesh, India


Page 25 of 25

P37Wear Behaviour of Nitrided 316LN Grade Austenitic Stainless Steels T. Kumar*, M. Gopal**, S. Venugopal*** and A. Rajadurai*****SRM University, Chennai, Tamilnadu, India, **DMI College of Engineering, Chennai,Tamilnadu, India, ***Indira Gandhi Center for Atomic Research, Kalpakkam, Tamilnadu,India, **** ANNA University, Chennai, Tamilnadu, IndiaP38Friction and wear behaviour of rice husk (RH) ceramic reinforced epoxycompositeS.P.Samantarai, S.K.Acharya and G.RaghavendraNIT, Rourkela, Orissa, India


Documents

th International Conference on Industrial Tribology (ICIT ... · PDF fileCONTACT MECHANISM AND FRICTION ... Rotary Kiln Srikant Inje, ... Torsional stiffness analysis of a vertical