Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 1/24
Ver. 1.1
TFT LCD Specification
Model Name: ZJ027NA-02P
Customer Signature
Date: 06/16/2017
This technical specification is subjected to change without notice
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 2/24
Table of Contents
NO. Item Page
Cover Sheet 1
Table of Contents 2
Record of Revision 3
1 Features 4
2 General Specifications 4
3 Input / Output Terminals 5
4 Absolute Maximum Ratings 6
5 Electrical Characteristics 7
6 Timing Chart 9
7 Power sequence 11
8 Serial interface 12
9 Application circuit 14
10 Optical Characteristics 15
11 Reliability 18
12 Handling Cautions 19
13 Mechanical Drawing 20-21
14 QR Code Label 22
15 Packing Drawing 23-24
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 3/24
Record of Revision
Document Version Module version Date Pag
e
Context
V 0.1 0.1 04/15/2015 Initial Specification
V 0.2 0.2 05/05/2015 20 Update Mechanical Drawing
Modify FPC Length.
V 0.3 0.3 08/12/2015 20 Update Mechanical Drawing
Add Mark
V 0.4 0.4 08/19/2015 20 Update Mechanical Drawing
Modify FPC outline and insolated tape outline
V1.0 1.0 07/21/2016 20
22
Update Mechanical Drawing
Modify QR Label outline and location
V1.1 1.0 10/31/2016 3 Add Module Version Sheet.
V1.1 1.0 10/31/2016 3 Add Module Version Sheet.
V1.1 1.1 10/31/2016 3 Module version changed to 1.1 for cost down BL
film with new LED.
V1.1 1.2 02/15/2017 22 Update QR code version and QR code drawing
V1.1 1.3 06/16/2017 20
22
Revise module drawing for QR code label change
Remove LOT-ID from QR code label
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 4/24
1. FEATURES
The 2.65” LCD module is the active matrix color TFT LCD module. TFT technology is ap-
plied with vertical and horizontal drivers built on the panel. Both of horizontal and vertical scan
are reversible and controlled by the serial interface commands. The product is designed for
the requirement of the green product, and the specification complies with INX’s “Green Prod-
uct Chemical Substance Specification Standard Hand Book”.
2. GENERAL SPECIFICATIONS
Item Description Unit
Display Size (Diagonal) 2.65 Inch
Display Type Transmissive -
Aspect Ratio 4:3 -
Display Landscape -
Pixel per pitch (PPI) 151 -
Active Area (HxV) 54X 40.5 mm
Number of Dots (HxV) 960 x 240 dot
Dot Pitch (HxV) 56.25 x 168.75 um
Color Arrangement RGB Delta -
Outline Dimension (HxVxT) * 63.5 X 46.6 X 2.5 mm
Weight 15.7 g
Panel surface treatment AG -
*Exclude FPC and protrusions.
*With WV film
** FPC at right side
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 5/24
3. INPUT/OUTPUT TERMINALS
3.1 TFT LCD Panel
Recommend connector:
Compatible with TF31-40S-0.5SH(800)
Pin Symbol I/O Description Remark
1 VCOM O Vcom voltage output
2 SPENB I Serial command enable
3 SPDA I Serial command data input
4 SPCK I Serial command clock input
5 HSD I Horizontal sync input
6 VSD I Vertical sync input
7 CLKIN I Data clock input
8 D7 I Data input; MSB
9 D6 I Data input
10 D5 I Data input
11 D4 I Data input
12 D3 I Data input
13 D2 I Data input
14 D1 I Data input
15 D0 I Data input
16 GND P Ground for digital circuit
17 ID1 P ID pin Note 1
18 ID2 P ID pin Note 1
19 VDD P System power
20 DVDD C Power setting capacitor connect pin
21 C1P C Power setting capacitor connect pin
22 C1M C Power setting capacitor connect pin
23 C2P C Power setting capacitor connect pin
24 C2M C Power setting capacitor connect pin
25 VINT1 C Power setting capacitor connect pin
26 C3P C Power setting capacitor connect pin
27 C3M C Power setting capacitor connect pin
28 NC No connect
29 NC No connect
30 C4P C Power setting capacitor connect pin
31 C4M C Power setting capacitor connect pin
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 6/24
32 VGH C Power setting capacitor connect pin
33 VGL C Power setting capacitor connect pin
34 AGND P Ground for analog circuit
35 FRP O Frame polarity output for VCOM
36 VCOMDC O Vcom DC voltage output
37 VCAC C Power setting capacitor for VCOM AC
38 VCOM O Vcom voltage output
39 VLED+ P LED power anode Note 2
40 VLED- P LED power cathode Note 2
Note 1:
ID1 ID2
GND VDD
Note 2: The figure below shows the connection of backlight LED.
4. ABSOLUTE MAXIMUM RATINGS
Item Symbol Min. Max. Unit
Power supply (pump) VDD -0.3 5.0 V
Storage temperature TSTG -30 80 ℃
Operating temperature TOPR -10 70 ℃
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 7/24
5. ELECTRICAL CHARACTERISTICS
Driving TFT LCD Panel GND=0V, Ta=25℃
Item Symbol MIN TYP MAX Unit Remark
Power Supply Voltage VDD 3.00 3.30 3.60 V Note 5-1
Input Signal
Voltage
Low Level VIL GND - 0.3x VDD V Input Signal Voltage
High Level VIH 0.7x VDD - VDD V
Panel Power Consumption WP - 30 - mW
Note 5-1: The VDD power is provided for overall panel module supply voltage.
Note 5-2:
SPENB, HSD, VSD equivalent circuit
D0~D7 equivalent circuit
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 8/24
SPDA, SPCK, CLKIN equivalent circuit
Driving Backlight Ta=25℃
Item Symbol MIN TYP MAX Unit Remark
Forward Current IF -- 25 27 mA Note 5-3
Forward Current Voltage VF -- 6.4 7.0 V
Backlight Power Consumption WBL -- 165 194 mW
Note 5-3: Backlight driving circuit is recommended as the fix current circuit.
* Ta: Ambient Temperature
* High temperature operation: Test current refers the diagram as following
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 9/24
6. TIMING CHART
8-bit RGB/8-bit Dummy RGB Input Timing Chart
6.1 8-bit RGB input timing
Parameter Symbol Interface
Unit Min. Typ. Max.
CLKIN frequency fCLKIN 15.84 27 27.026 MHz HSD period tH 1044 1716 1653 CLKIN HSD display period tHD 960 CLKIN HSD back porch tHBP 50 70 255 CLKIN HSD front porch tHFP 84-tHBP* 686 438 CLKIN HSD pulse width tHSW 1 1 200 CLKIN VSD period time tV 244.5 262.5 272.5 H Vertical display area tVD 240 H VSD back porch
Odd field tVBP
3 21 31 H
Even field 3.5 21.5 31.5 VSD front porch
Odd field tVFP
1.5 1.5 1.5 H
Even field 1 1 1 VSD pulse width tVSW 1CLKIN 1CLKIN 6H 1 Frame 489 525 545 H
*tHBP+tHFP≧84, where tHFP≧0
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 10/24
AC Electrical Characteristics
(VDD =3.0~3.6V, VDDIO=AVDD=VDD, AGND=GND=0V, TA=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions Time that the HSD to CLKIN Thc - - 1 CLKIN HSD period time Th 60 63.56 67 us VSD setup time Tvst 12 - - ns VSD hold time Tvhd 12 - - ns HSD setup time Thst 12 - - ns HSD hold time Thhd 12 - - ns
Data setup time Tdsu 12 - - ns DR0~DR7, DG0~DG7, DB0~DB7 to CLKIN
Data hold time Tdhd 12 - - ns DR0~DR7, DG0~DG7, DB0~DB7 to CLKIN
Timing Waveform
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 11/24
7. POWER SEQUENCE
7.1 Power On Sequence
7.2 Power off Sequence
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 12/24
8. SERIAL INTERFACE
8.1 SPI command format
A6 R/W A5 A3 A2 A0 D3 D2A4 A1 D7 D6 D5 D4 D1 D0
SPENB
SPDA
SPCK1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
� Each serial command consists of 16 bits of data that is loaded one bit a time at the rising edge of serial
clock SPCK. Command loading operation starts from the falling edge of SPENB and is completed at
the next rising edge of SPENB.
� The serial control block is operational after power on reset, but commands are established by the VSD
signal. If command is transferred multiple times for the same register, the last command before the
VSD signal is valid.
� If less than 16 bits of SPCK are input while SPENB is low, the transferred data is ignored.
� If 16 bits or more of SPCK are input while SPENB is low, the first 16 bits of transferred data before the
rising edge of SPENB pulse are valid data.
� Serial block operates with the SPCK clock. � Serial data can be accepted in the power save modes. Seiral Interface Write Sequence
A6 0 A5 A3 A2 A0 D3 D2A4 A1 D7 D6 D5 D4 D1 D0
SPENB
SPDA
SPCK1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Serial Interface Read Sequence
A6 1 A5 A3 A2 A0 D3 D2A4 A1 D7 D6 D5 D4 D1 D0
SPENB
SPDA
SPCK1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 13/24
8.2 SPI timing
S0 S1 S1550%
SPENB
SPCK
SPDA
50%
50%
tS0 tWH1 tWL1
tS1 tH1
tH0 tW2
50%
Item symbol Min. Typ. Max. Unit SPENB input setup time tS0 50 ns Serial data input setup time tS1 50 ns SPENB input hold time tH0 50 ns Serial Data Input hold time tH1 50 ns SPCK pulse high width tWH1 50 ns SPCK pulse low width tWL1 50 ns SPENB pulse high width tW2 400 ns
8.3 Instruction setting
Register Data Remark
0x05 0x1E / Global reset
0x00 0x0C // Set VCOM voltage AC level
0x01 0xAF // Set VCOM voltage DC level
0X04 0X0B // Set Input data format (RGB through mode)
0X13 0X00 Delta input: R13H = 00H
0x16 0x00 // Set Gamma Curve
0x17 0x00
0x18 0x31
0x19 0x42
0x1A 0x53
0x3C 0xB4
0x3D 0x34
0x3E 0x00
0x3F 0x31
0x40 0x42
0x41 0x43
0x2B 0x01 // Sleep out
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 14/24
9. Application circuit
Pin Name Capacitor Pin Name Capacitor
CP1P 2.2uF / 10V / 10% / X5R / 0603
VINT1 2.2uF / 10V / 10% / X5R / 0603
CP1M VGH 2.2uF / 25V / 10% / X5R / 0603
CP2P 1uF / 10V / 10% / X5R / 0603
VGL 2.2uF / 16V / 10% / X5R / 0603
CP2M VDD 1uF / 6.3V / 10% / X5R / 0603
CP3P 1uF / 16V / 10% / X5R / 0603
DVDD 1uF / 6.3V / 10% / X5R / 0603
CP3M FRP 2.2uF / 10V / 10% / X5R / 0603
CP4P 1uF / 16V / 10% / X5R / 0603
VCOMDC 2.2uF / 10V / 10% / X5R / 0603
CP4M VCAC 2.2uF / 10V / 10% / X5R / 0603
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 15/24
10. OPTICAL CHARACTERISTICS Optical Specification
Item Symbol Condition MIN TYP MAX Unit Remarks
Viewing Angles
ΘL
CR ≥ 10
50 60 -
Degree Note 10-1 ΘR 50 60 -
ΘT 40 50 -
ΘB 45 55 -
Contrast Ratio CR
Θ=0°
200 300 - Note 10-2
Response Time Tr -- 15 20
ms Note 10-3 Tf -- 20 30
Luminance (IF=25mA) L 250 315 - cd/m2 Note 10-4
Chromaticity White xW 0.245 0.295 0.345
Note 10-5 yW 0.285 0.335 0.385
NTSC (x,y) - 45 - %
10-1Basic Measure Conditions
(1) Driving voltage
VDD= 3.3 V
(2) Ambient Temperature: Ta=25℃
(3) Testing Point: Measure in the display center point and the test angleΘ=0°
(4) LED Current: IF=25mA.
(5) Testing Facility
Environmental illumination: ≤ 1 Lux
35cm
TFT LCD Modulewith Backlight
Photometer
Video SignalInput
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 16/24
Note 10-1: Viewing angle diagrams:
Definition of viewing angle
Definition of viewing angle for display
Top
Right Left
Bottom
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 17/24
Note 10-2: Contrast Ratio:
Contrast ratio is measured in optimum common electrode voltage.
CR = Luminance with white image
Luminance with black image
Note 10-3: Definition of response time:
100%
90%
10%
0%
Lum
inan
ce
White WhiteBlack
Tr Tf
Note 10-4: Luminance:
Test Point: Display Center
Note 10-5: Chromaticity: The same test condition as Note 10-4.
Note 10-6 :Definition of Luminance Uniformity
Active area is divided into 9 measuring areas .Every measuring point is placed at the
center of each measuring area.
max
min
BB
(Yu)Uniformity Luminance =
L-------Active area length W----- Active area width
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 18/24
11. RELIABILITY
No Test Item Condition
1 High Temperature Operation Ta=+70℃, 240hrs
2 High Temperature & High Humidity Operation Ta=+40℃, 95% RH, 240hrs
3 Low Temperature Operation Ta= -10℃, 240hrs
4 High Temperature Storage (non-operation) Ta=+80℃, 240hrs
5 Low Temperature Storage (non-operation) Ta=-30℃, 240hrs
6 Thermal Shock (non-operation) -30℃←→80℃, 50 cycles
30 min 30 min
7 Resistance to Static Electricity Discharge
(non-operation)
C=200pF, R=0Ω;
Discharge: ±150V
3 times / Terminal
8
Surface discharge ESD Test
C=150pF, R=330Ω
Discharge: Air: >±2kV; Contact: >±2kV
5 times/ Point, 5Points / Panel non-operation
9 Vibration (non-operation)
Frequency: 10~55Hz; Amplitude: 1.5mm
Sweep Time: 11min
Test Time: 2 hrs for each direction of X, Y, Z
10 Shock (non-operation) Acceleration: 100G; Period: 6ms
Directions: ±X, ±Y, ±Z; Cycles: Twice
Ta: Ambient Temperature
* For environment stress test, the image quality guarantee after recover time 2 hours at ambient
environment. * Polarizer cosmetic is not guarantee after reliability test.
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 19/24
12. HANDLING CAUTIONS
12.1 ESD (Electrical Static Discharge) Strategy
ESD will cause serious damage of the panel, ESD strategy is very important in handling. Fol-
lowing items are the recommend ESD strategy
(1) In handling LCD panel, please wear non-charged material gloves. And the conduction ring
connect wrist to the earth and the conducting shoes to the earth is necessary.
(2) The machine and working table for the panel should have ESD prohibition strategy.
(3) In handling the panel, ionize flowing decrease the charge in the environment is necessary.
(4) In the process of assembly the module, shield case should connect to the ground.
12.2 Environment
(1) Working environment of the panel should in the clean room.
(2) The front polarizer is easy damaged, handle it carefully and do not scratch it by sharp ma-
terial.
(3) Panel has polarizer protective film in the surface please remove the protection film of po-
larizer slowly with ionized air to prevent the electrostatic discharge.
12.3 Others
(1) Turn off the power supply before connecting and disconnecting signal input cable.
(2) The connection area of FPC and panel is very weak, do not handle panel only by FPC or
bend FPC.
(3) Water drop on the surface or condensation as panel power on will corrode panel electrode.
(4) As the packing bag open, watch out the environment of the panel storage. High temperature
and high humidity environment is prohibited.
(5) When the TFT LCD module is broken, please watch out whether liquid crystal leaks out or
not. If your hand touches liquid crystal, wash your hand cleanly by water and soap as soon
as possible.
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 20/24
13. DRAWING
13-1. MECHANICAL DRAWING
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 21/24
13-2. SUGGESTION CONNECTOR TYPE
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 22/24
14. QR Code Label
14.1 QR code Label – Area 1
QR code ( area 1 ) include the information as below:
1.The 1st paragraph : IN
-- Innolux
2. The 2nd paragraph : INX date code
-- YYYY : year
-- MM : month
-- DD : date
3. The 3rd paragraph : Product Spec Revision
--1.0
4. The 4th paragraph : Serial Number
--00001
14.2 QR code Label – Area 2 QR code ( area 2 ) include the information as below:
1. The 1st paragraph is Supplier Name & Date (YYYY-MM-DD)
-- In20170616
2. The 2nd paragraph is Product Spec Revision & Serial Number
-- 1.3 00001
3. The 3rd paragraph is HP Part Number
-- 2090-1103
4. The 4th paragraph is Model Name.
-- ZJ027NA-02P
IN20170616
1.3 00001
2090-1103
ZJ027NA-02P
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 23/24
15. Packing Drawing
ZJ027NA-02P
The information contained herein is the exclusive property of Innolux Corporation(“INX”), and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of INX.INX shall not be liable for any infor-mation and unauthorized misuse, abuse, modification of this file.
Page: 24/24
2.65" module (GZ0270NA00J30) delivery packing method
(1). Module packed into tray cavity (with Module display face down).
(2). Tray stacking with 20 layers and with 1 empty tray above the stacking tray unit.
2pcs desiccant put above the empty tray
(3). Stacking tray unit put into the LDPE bag and fix by adhesive tape.
(4). Put 1pc cardboard inside the carton bottom, and then pack the package unit into the carton.
Put 1pc cardboard above the package unit.
(5). Carton tapping with adhesive tape.