Loose tubeTF10019-A-DF(ZN)2Y(SR)2Y-06464

www.prysmiangroup.com Issued 2014-11-27 BS / Page 1 of 2

TF10019

A-DF(ZN)2Y(SR)2Y

Double PE Sheathed, Corrugated Steel Tape Armoured, DirectBuried type optical cable

Cable Design IEC/EN 60794-3-10

Central strength member (CSM): glass fibre reinforced plastic material(GRP).

Tube: thermoplastic material, containing 6 single-mode optical fibres andfilled with a suitable water tightness compound.

Stranding: the required numbers of elements (tubes or fillers) are SZstranded around the central strength member.

Longitudinal Water Tightness: filled core.

Peripheral reinforcement: aramid yarns.

Inner Sheath: MDPE ,Min thickness : 1.5 mm, 2 ripcords beneath the sheath

Armour: both sides copolymer coated corrugated steel tape with overlap,nom. steel thickness: 0.15 mm. Water swellable tape will be applied underthe armour. 2 ripcords beneath the tape.

Outer Sheath: HDPE

With its HDPE sheathing this cable is ideal for outdoor installation.

Technical dataNo. of Fibres 24

Design 4x6E+2F

Loose Tube / Filler - Ø mm Min 2.3

CSM mm 2.5

Sheath thickness mm 2.0 (±0.1)

Cable Diameter mm 16.7

Cable Weight kg / km 253

Max installation tension N 4000 N

Min. bending radius mm Without Tension15 x Cable-Ø

Under Maximum Tension20 x Cable-Ø

Temperature range °C Installation-30 -> +60;

Transport. & Storage-40 -> +80 ;

Operation-40 -> +80

Main characteristicsTest Standard Value Sanction*

Maximum Tension atinstallation (short term)

IEC 60794-1-2-E1 4000 N 0.05 dB

Crush IEC 60794-1-2-E3 4400 N / 100mm, max 5 min 0.05 dB

Impact IEC 60794-1-2-E4 5 Nm, 25 impacts (distance:300mm), r=300mm

0.05 dB

Cable cold bend IEC 60794-1-2-E11 R = 20 x cable Ø / -30°C + 60°C 0.1 dB , no damage orbreakage of cable

Torsion IEC 60794-1-2-E7 100 N, +- 180°, 10 cycles 0.05 dB

Repeated bending IEC 60794-1-2-E6 R= 20 x cable Ø, 100N, 10 cycles 0.05 dB

Cable bend IEC 60794-1-2-E11 R = 20 x cable Ø 0.05 dB (after the test)

Temperature range IEC 60794-1-2-F1 -40 -> +80°C 0.05 dB /km

Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour

Compound flow test IEC 60794-1-2-E14 24 hours @ 70 °C No flow

Kink test IEC 60794-1-2-E10 Loop=Min 20 x cable Ø No damage

Cable Aging IEC 60794-1-2-F1 168 hours@80°C 0.05 dB /km

* values for single-mode fibres, all optical measurements performed at 1550 nm

Optical Characteristics

See the attached cabled optical fibre data sheet.

Loose tubeTF10019-A-DF(ZN)2Y(SR)2Y-06464

www.prysmiangroup.com Issued 2014-11-27 BS / Page 2 of 2

TF10019

A-DF(ZN)2Y(SR)2Y

Identification

Fiber Colors

No. 1 2 3 4 5 6

Color white red green blue yellow black

Buffer Tube Colours

No. 1 2 3 4

Color red green blue yellow

Fillers are naturel coloured

Sheath Colour:

The inner/outer sheath colour is black.

Sheath Marking:

The outer sheath is marked in 1 meter intervals as follows:

□ PRYSMIAN mm yyyy A-DF(ZN)2Y(SR)2Y OPTICAL CABLE 24 SM G652D NIGC zzzz

mm yyyy (mount / year) –zzzz (Sequential Length Mark)

Logistic

Packing:

Wooden drums with protection.

Delivery Lengths:

Standard delivery length is 4.1 km with a tolerance of ±5%

© PRYSMIAN 2014, All Rights Reserved

All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian: any modification oralteration afterwards of product may give different result.

The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without thewritten consent of Prysmian. The information is believed to be correct at the time of issue. Prysmian reserves the right to amend thisspecification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian.