Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Name of the
Bidder/
Bidding Firm /
Company :
NUMBER #TEXT #
TEXT # NUMBER # TEXT # NUMBER NUMBER # NUMBER # TEXT #
Sl.
No. Item DescriptionItem Code /
Make
Quantity Units Estimated
Rate
in
Rs. P
BASIC RATE In
Figures To be
entered by the
Bidder in
Rs. P
TOTAL AMOUNT
Without Taxes
in
Rs. P
TOTAL AMOUNT
In Words
12
3 4 5 6 13 53 55
1 Clearing jungle including uprooting of rank vegetation,
grass, brush wood, trees and saplings of girth up to 30
cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the
periphery of the area cleared.
item1 2000 Sqm 0.00
2 Clearing grass and removal of the rubbish up to a
distance of 50 m outside the periphery of the area
cleared.
item2 5000 Sqm 0.00
PRICE SCHEDULE
Tender Inviting Authority: Additional Commissioner & Regional Director, ESI Corporation, Regional Office, Faridabad
Name of Work: Annual Repair and Maintenance of Civil & Electrical Works at ESIC Regionl Office and its Staff Quarters & other locations, Faridabad, Haryana
Contract No: 13/W/13/13/2019-20/RO Fbd. /Const.
3 Cleaning of under ground sump, Over Head R.C.C.
Tank(independent staging) including disposal of slit and
rubbish, all as per direction of Engineer-in-charge. The
cleaning shall consist following operations:- 1. Tank
shall be emptied of water by pumping & bottom shall
be cleaned of slit and other deposits. 2. Entire surface
area of the sump shall then scrubbed thoroughly with
wire brush etc. and pressure washed with water. 3.
chlorination of RCC internal surface by liquid chlorine.
4. The treated surface shall be dried using air jetting
and all loose particles shall be removal from the
surface. 5. Finally the surface shall be treated with
ultraviolet radiation etc. as per direction of Engineer-in-
Charge.
item3 350 Sqm 0.00
4 Carrige of malba building rubbish by machnical
transport including loading unloading and stacking upto
5 Km.
item4 300 Cum 0.00
5 Carrige of Manure or Sludge by machnical transport
including loading unloading and stacking upto 5 Km.item5 100 Cum 0.00
6 Cleaning of terrace/loft water storage tank (inside
surface area) upto 2000 litre capacity at all heights with
coconut brushes, duster etc. removal of silt, rubbish
from the tack and cleaning the tank with fresh water
disinfecting with bleaching powder @ 0.5 gm per litre
capacity of tank, including making the date of cleaning
on the side of tank body with the help of stencil and
paint and disposing of malba, all complete as per
direction of Engineer-in-charge. (The old date already
written on tank should be removed with paint remover
or black paint and if date is not written with the stencil
or old date is not removed deduction will be made @
Rs. 0.10 per litre if during cleaning any GI fittings or ball
cock is damaged that is to be repaired by contractor at
his own cost and nothing extra will be paid on this
item6 80000 Ltr 0.00
7 Cleaning and desilting of gully trap chamber, including
removal of rubbish mixed with earth etc. and disposal
of same, all as per the direction of Engineer-in-charge.item7 30 Each 0.00
8 Cleaning of chocked sewer line by diesel running
vehicle mounting hydraulic operated high pressure
suction cum jetting sewer cleaning machine fitted with
pump having 4000 litres suction capacity and 6000
litres water jetting tank capacity including skilled
operator, supervising engineer etc. for cleaning and
partial desilting of manholes and dechocking of sewer
lines. Dechocking and flushing of sewer line from one
manhole to another ny high pressure jetting system of
2200 PSI for sewer line from 150mm dia upto 300mm
dia for all depth.
item8 250 Mtr 0.00
9 Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering - All work to any level 1:1.5:3 (1 Cement : 1.5
Coarse sand : 3 graded stone aggregate 220 mm
nominal size.)
item9 5 Cum 0.00
10 Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering - All work to any level 1:3:6 (1 Cement : 3
Coarse sand : 6 graded stone aggregate 220 mm
nominal size.)
item10 5 Cum 0.00
11 Making plinth protection 50mm thick of cementt
concrete 1:3:6( 1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) over 75mm bed
by dry brick ballast 40mm nominal size well rammed
and consolidated and grouted with fine sand including
finishing the top smooth.
item11 100 Sqm 0.00
12 Centering and shuttering including strutting, propping
etc. and removal of formm work for : lintels, beams,
plinth neams, girders, bressumrs and cantilevers.
item12 15 Sqm 0.00
13 Steel reinforcemen for R.C.C. work including
straightening, cutting, nemding, nplacing in position
and binding all complete upto plinth level. Thermo-
mechnacally Treated bars.
item13 500 Kg 0.00
14 Brick work with common burnt clay F.P.S (non-
modular) brick of class designation 7.5 in foundation
and plinth in:6.1.1 Cement mortar 1:4 ( 1 Cement : 4
Coarse sand)
item14 10 Cum 0.00
15 Half brick masonry with common burnt clay F.P.S (non
modular) bricks of class designation 7.5 in foundation
and plinth in 6.12.1 Cement mortar 1:3 ( 1 Cemant: 3
coarse sand)
item15 5 Sqm 0.00
16 Cement mortar 1 :6 (1 Cement : 6 Coarse Sand) item16 5 Cum 0.00
17 Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) decorative type, core of
block board construction with frame of 1st class hard
wood and well matched teak 3 ply veneering with
vertical grains or crooss bands and face venners in both
faces of shutters. 35mm thick includin ISI marked
Stainless Steel butt hinges with necessary screws.
item17 30 Sqm 0.00
18 Providing and fixing curtain rods of 1.25 mm thick
chromium plated brass plate, with two chromium
plated brass brackets fixed with C.P. brass screws and
wooden plugs, etc. wherever necessary complete :
20mm dia
item18 20 Mtr 0.00
19 Providing and fixing M.S. Grills of required pattern in
frames of windows etc. with M.S. Flats, square or round
bars etc. including priming coat with approved steel
primer all complete. Fixed to steel windows by
weldin.
item19 200 Kg 0.00
20 Fixed to openings/ wooden frames with raw plugs
screws etc.item20 100 Kg 0.00
21 Providing and fixing to existing door frames. 24mm
thick factory made PVC door shutters made of styles
and rails of a UPVC hollow section of size 59X24mm and
wall thickness 2mm (+- 0.2mm) with inbuilt edging on
both sides. The styles and rails mitred and joint at the
corners by means of M.S. galvanised/plastic brackets of
size 75X220mm having wall thickness 1.0mm and
stainless steel screws. The styles of the shutter
reinforced by inserting galvanised M.S. tube of size
20X20mm and 1mm(+-0.1mm) wall thickness. The lock
rail made up of 'H' section, a UPVC hollow section of
size 100X24mm and 2mm (+-0.2mm) all thickness, fixed
to the shutter styles by means of plastic/galvanised
M.S. 'U' cleats. The shutter frame filled with a UPVC
multi-chambered single panel of size not less than
item21 30 Sqm 0.00
22 Providing and fixing factory made P.V.C. door frame of
size 50X47 mm with a wall thickness o 5mm, made out
of extruded 5mm rigid PVC foam sheet, mitred at
corners and joined with 2 Nos. of 150mm long brackets
of 15X15mm M.S. square tube, the vertical door frame
proffiles to be reinforced with 19X19mm M.S. square
rube of 19 auge, EPDM rubber gasket weather seal to
be provided through out the frame. The door frame to
be fixed to the wall using M.S. screws of 65/100 mm
size, complete as per manufacturers specification and
direction of Engineer-in-charge.
item22 10 Mtr 0.00
23 Structural steel work in single section fixed with or
without connecting plate including cutting, hoisting,
fixing in position and applying a priming coat of
approved steel primer all complete.
item23 10 Kg 0.00
24 Providing and fixing Ist quality ceremic glazed wall tiles
conforming to IS : 15622(thickness to be specified by
the manufacturer) of approved make in all colours,
shades except burgundy, botle green, black of any size
as approved by Engineer-in-charge in skirting, risers of
steps and dados over 12mm thick bed of cement morar
1:3(1 cement : 3 coarse sand) and jointing with grey
cement slurrt @ 3.3kg per sqm including pointing in
white cement mixed with pigment of matching shade
complete.
item24 200 Sqm 0.00
25 Providing and laying Ceramic glazed floor tiles
300X300mm (thickness to be specified by manuacturer)
of 1st quality conforming to IS : 15622 of approved
make in colours such as White, Ivory, Grey, Fume red,
Brown, laid on 20mm thick Cement Mortar 1:4 (1
cement: 4 Coarse sand) including pointing the joints
with white cement and matching pigment ec. complete.
item25 100 Sqm 0.00
26 Providing and laying Vitrified tiles in floor with different
sizes (thickness to be specified byy the manufacturer),
with water absorption less htan 0.08% and conforming
to IS: 15622, of approved brand & manufacturer in all
colours and shade, laid with cement based high
polymer modified quick set tile adhesive (water based)
conforming to IS : 15477, in average 6mm thickness,
includin grouing og joints (Payment for grouting of joint
to be made separately). Size of Tile 600X600 mm
item26 150 Sqm 0.00
27 Providing corrugated G.S. sheet roofing including
vertical/ curved surfface fixed with polymer coated J
and L hooks, bolts and nuts 8mm diameter with
bituman and G.I. limpet washers filled with white lead
and including a coat of approved steel primer and two
coats of approved paint on overlapping of sheets
complete upto any pitch in horizontal/ vertical or
curved surfaces) excluding the cost of purlins, rafters
and trusses and including cutting to size and shape
wherever reuired. 0.63 mm thick with zinc coating not
less than 275gm/sqm.
item27 20 Sqm 0.00
28 Providing and fixing on wall face Unplasticised Rigid
PVC arin water pipes conforming to IS: 13592 Type A
including jointing with seal rintg conforming to IS : 5382
leaving 10mm gap for thermal expansion. (i) single
socketed pipes. (a) 75mm diameter
item28 30 Mtr 0.00
29 (b) 110mm diameter item29 200 Mtr 0.00
30 12mm cement plaster of mix 1 :4 (1 cement : 4 fine
sand) item30 100 Sqm 0.00
31 15mm cement plaster on the rough side of single or
half brick wall of mix 1 : 4(1 cement : 4 coarse sand)item31 10 Sqm 0.00
32 6mm cement plaster of mix 1 :3 (1 cement : 3 fine sand) item32 10 Sqm 0.00
33 White wash with lime to give an even shade : New work
(three or more coats)item33 100 Sqm 0.00
34 White wash with lime to give an even shade : Old work
(two or more coats)item34 300 Sqm 0.00
35 Distemparing with oil bound washable distemparing of
approved brand and manufacture to give an even shade
: New work(Two or more coats) over and including
water thinable priming coat with cement primer.
item35 100 Sqm 0.00
36 Finishing walls with water proofing cement paint of
required shade : New work (Two or more coats applied
@ 3.84kg/10sqm)
item36 100 Sqm 0.00
37 Finishing walls with water proofing cement paint of
required shade : Old work (One or more coats applied
@ 2.20kg/10sqm)
item37 3000 Sqm 0.00
38 Finishing walls with Premium Acrylic Smooth exterior
paint with Silicon additives of required shade New work
(Two or more coats applied @ 1.43ltr/10sqm over and
including priming coat of exterior primer applied
@2.20kg/10sqm)
item38 300 Sqm 0.00
39 Finishing walls with Premium Acrylic Smooth exterior
paint with Silicon additives of required shade Old work
(Two or more coats applied @ 1.43ltr/10sqm)
item39 5000 Sqm 0.00
40 Renewing glass panes, with putty and nails wherever
necessary including racking out the old putty : Float
glass panes of thickness 4mm.
item40 200 Sqm 0.00
41 Renewing glass panes, with wooden fillets wherever
necessary Float glass panes of thickness 4mm.item41 50 Sqm 0.00
42 Removing white or colour wash by scrapping and sand
papering and preparin the surface smooth including
necessary repairs to scratches etc. complete.
item42 5000 Sqm 0.00
43 Distemparing with oil bound washable distemparing of
approved brand and manufacture to give an even shade
: Old work(One or more coats).
item43 10000 Sqm 0.00
44 Removing dry or oil bound distemper, water proofing
cement paint and the like by screpping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
item44 15000 Sqm 0.00
45 Wall painting with plastic emulsion paint of approved
brand and manufacture to give an even shade : One or
more coats on old work.
item45 100 Sqm 0.00
46 Painting with synthetic enamel paint of approved brand
and manufacture of reqrited colour to give an even
shade : one or more coats on old work.
item46 3000 Sqm 0.00
47 Demolishing cement concrete manually/ by mechanical
means including disposal of material within 50 metres
lead as per direction of Engineer-in- charge. Nominal
concrete 1:3:6 or richer mix (i/c equivalent design mix)
item47 20 Cum 0.00
48 Demolishing R.C.C. work manully/ by mechanical means
including stacking of steel bars and disposal of
unserviceable material within 50 metres lead as per
direction Engineer-in-charge.
item48 10 Cum 0.00
49 Demolishing Brick work manully/ by mechanical means
including stacking of serviceable material and disposal
of unserviceable material within 50 metres lead as per
direction Engineer-in-charge. In Cement Mortar
item49 10 Cum 0.00
50 Dismantling tile work in floors and roofs laid in cement
mortar including sraking material within 50 metres
lead. For thickness of tiles 10mm to 25mm
item50 20 Sqm 0.00
51 Dismantling old plaster or skirting raking out joints and
cleaning the surface for plaster including disposal of
rubbish to the dumping ground within 50 metres lead.
item51 200 Sqm 0.00
52 Providing and fixing aluminium work for doors,
windows, ventilators and partitionswith extruded built
up standard tubular sections/ appropriate Z sections
and other sections of approved make conforming to IS :
733 and IS : 1285, fixing with dash fasteners of required
dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottoms and sides with required
EPDM rubber/ neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and
jointed mechnically wherever required including cleat
angle, Aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as [er
architectural drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners to be paid
for separately) : Powder coated aluminium (minimum
item52 100 Kg 0.00
53 for shutter of doors, windows & ventilators including
providing and fixing hinges/ pivots and making
provision fofr fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket
required (Fittings shall be paid for separately). Powder
coated aluminium (minimum thickneess of powder
coating 50 micron)
item53 100 Kg 0.00
54 Providing and fixing 12mm thick Pre-laminated particle
board flat pressed thtree layer or graded wood particle
board conforming to IS : 12823 Grade I Type II, in
panelling fixed in aluminium doors, indows shuters and
parition frames with C.P. brass/ stainless steel screws
etc. complete as per architectural drawings and
directions of engineer-in-charge. Pre-laminated particle
board with decorative lamination on boh sides.
item54 50 Sqm 0.00
55 Providing and fixing glazing in aluminium door, window,
ventilator shutters and partittions etc. with EPDM
rubber/neoprene gasket etc. conplete as per the
architectural drawings and the directions of engineer-in-
charge. (Cost of aluminium snap beading shall be paid
in basic item) : With float glass panes of 4.0 mm
thickness.
item55 50 Sqm 0.00
56 Fillng the gap in between aluminium frame & adjacent
RCC/ Brick/ Stone work by providing weather silicon
sealant over backer rod of approved quality as per
architectural drawings and direction of Engineer-in-
charge complete. Upto 5mm depth and 5mm width.
item56 10 Mtr 0.00
57 Providing and fixing 100mm brass locks (best make of
approved quality) for aluminium doors including
necessary cutting and making good etc. complete.
item57 10 Each 0.00
58 Providing and fixing anodised aluminium grill (anodised
transparent or dyed o required shade according to IS :
1868 with minimum anodic coating of grade AC 15) of
approved design/pattern, with approved standard
section and fixed to the exising window frame with C.P.
brass/ stainless steel screws @ 200mm center to
center, including cutting he grill to proper opening size
for fixing and operation of handles and fixing approved
anodised aluminium standard section around the
opening, all complete as per requirement and direction
of Engineer-in-charge. (Only weight of grill to be
measured for payment).
item58 50 Kg 0.00
59 Grading roof for water proofing treatment with Cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size)
item59 10 Cum 0.00
60 Providing and applying plaster of paris putty of 2mm
thickness over plastered surface to prepare the surface
even and smooth complete.
item60 3000 Cum 0.00
61 Providing and fixing water closet squatting pan (Indian
type WC pan) with 100mm sand cast Iron P or S trap, 10
litre low level white PVC flushing cistern, including flush
pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls
and floors wherever required : White Vitreous china
Orissa pattern WC Pan of size 580X440mm with
intergral type foot rests.
item61 20 Sqm 0.00
62 Repairs to plaster of thickness 12mm to 20mm in
patches of area 2.5 sqm and under, including cutting
the patch in proper shape, raking out joints and
preparing and plastering the surace of the walls
complete, including disposal of rubbish to the dumping
ground within 50 metres lead : With cement mortar 1 :4
(1 cement : 4 fine sand)
item62 1000 Sqm 0.00
63 Providing and fixing double scaffolding system (cup lock
type) on the exterior side, up to seven story height
made with 40 mm dia MS tube 1.5m centre to centre,
horizontal & vertical tuber joining with cup & lock
system with MS tubes, MS tube challies, MS clamps and
MS staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable
condition for the required duration as appproved and
removing it there after. the scaffolding system shall be
stifened with bracings, runners, connection with the
building etc wherever required for inspection of work
at required locations with essential safety features for
the workmen etc. complete as per directions and
approval of Engineer- in- charge. The elevational area of
the scaffolding shall ne measured for payment
item63 200 Sqm 0.00
64 Providing and fixing wash basin with CI breakets, 15mm
CP Brass pillar taps, 32mm CP brass waste of standard
pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630X450 mm
with a single 15mm CP brass pillar tap.
item64 30 Each 0.00
65 Providing and fixing white vitreous china pedestal type
water closet (European type) with seat and lid, 10 litre
low level white vitreous china flushing cistern & CP
flush bend with fittings & CI Breakets, 40mm flush
bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved
municipal design complete, including painting of fittings
and brackets, cutting and making good the walls and
floors wherever required : WC pan with ISI marked
white solid plastiv seat and lid.
item65 10 Each 0.00
66 Providing and fixing Stainless steel A IS 1304 (18/8)
kitchen sink as per IS : 13983 with CI brackets and
stainless steel plug 40mm, including painting of fittings
and brackets, cutting and making good the alls
wherever required: 510X1040mm bowl depth 225mm.
item66 10 Each 0.00
67 Stone Aggregate (Single size) : 20mm nominal size item67 10 Cum 0.00
68 Stone Aggregate (Single size) : 12.5mm nominal size item68 5 Cum 0.00
69 Portland cement (PPC) item69 200 Bag 0.00
70 Portland cement (OPC- 43 Grade)) item70 10 Bag 0.00
71 White cement item71 5 Bag 0.00
72 Bright finished or black enameleed mild steel butt
hinges 100X58X1.90mmitem72 2 10 Nos 0.00
73 Bright finished or black enameleed mild steel butt
hinges 75X47X1.70mmitem73 2 10 Nos 0.00
74 Anodised Aluminium tower bolt (barrel type)
150X10mmitem74 5 10 Nos 0.00
75 Anodised Aluminium tower bolt (barrel type)
100X10mmitem75 5 10 Nos 0.00
76 Anodised Aluminium handles 75mm with plate
25X32mmitem76 5 10 Nos 0.00
77 Anodised Aluminium Kicking Plate 50cm item77 5 Each 0.00
78 Coarse sand (Zone- III) item78 50 Cum 0.00
79 Fine sand (Zone-IV) item79 80 Cum 0.00
80 Stone dust item80 5 Cum 0.00
81 Sodium Hypochlorite(water Disifectant) Bleaching
Powderitem81 1 Quintal 0.00
82 G.I. Pipes 15mm dia item82 350 Mtr 0.00
83 G.I. Pipes 20mm dia item83 100 Mtr 0.00
84 G.I. Pipes 25mm dia item84 50 Mtr 0.00
85 G.I. Union 15mm Nominal Bore item85 400 Each 0.00
86 G.I. Union 20mm Nominal Bore item86 50 Each 0.00
87 G.I. Union 25mm Nominal Bore item87 50 Each 0.00
88 Polythylene water storage tank with cover and suitable
locking arrangement.item88 3000 Per Ltr 0.00
89 White Vitreous china laboratory sink 600X450X200mmitem89 5 Each 0.00
90 White Plastic seat (solid) with lid C.P. brass hinges and
rubber buffers.item90 15 Each 0.00
91 Shower rose C.P. brass for 15 to 20 mm inlet 100mm
diaitem91 50 Each 0.00
92 H.P. or L.P. ball valve with polyethene floats : 15mm diaitem92 150 Each 0.00
93 H.P. or L.P. ball valve with polyethene floats : 20mm diaitem93 50 Each 0.00
94 H.P. or L.P. ball valve with polyethene floats : 25mm diaitem94 10 Each 0.00
95 Gun metal non return wall- Horizontal (Screwed end)
25mm dia item95 1 Each 0.00
96 Vitreous China flat back wash basin 630X450 mm item96 20 Each 0.00
97 Vitreous China Orisa type W.C. pan size 580 mm item97 10 Each 0.00
98 Vitreous China Pedestal type water closet item98 10 Each 0.00
99 Plywood 5mm Ply with commercial ply on both faces
6mm thickitem99 30 Sqm 0.00
100 Hydrolic door closer bottle type M.S. body with
necessary accessories and screws complete.item100 10 Each 0.00
101 Anodised Aluminium hanging type door stopper item101 30 Each 0.00
102 C.P. brass bib cock 15 mm item102 200 Each 0.00
103 C.P. Brass stop cock(Consealed) 15 mm item103 30 Each 0.00
104 Brass Stop cock item104 30 Each 0.00
105 C.P. brass angle wall item105 100 Each 0.00
106 Rectangular shape 453X357mm mirror with plastic
moulded frameitem106 20 Each 0.00
107 Semi Regid PVC waste pipe for sink and wash basin
32mm dia with length not less than 700 mm i/c PVC
waste fittings.
item107 100 Each 0.00
108 Semi Regid PVC waste pipe for sink and wash basin
40mm dia with length not less than 700 mm i/c PVC
waste fittings.
item108 50 Each 0.00
109 UPVC pipes (working presure 4 kg/ cm2) single
socketed pipe 75mm diaitem109 50 Each 0.00
110 UPVC pipes (working presure 4 kg/ cm2) single
socketed pipe 110mm diaitem110 50 Each 0.00
111 UPVC pipes (working presure 4 kg/ cm2) Rubber(seal)
ring 75mm diaitem111 50 Each 0.00
112 UPVC pipes (working presure 4 kg/ cm2) rubber (seal)
ring 110mm diaitem112 50 Each 0.00
113 C.P. Brass pillar cock item113 100 Each 0.00
114 C.P. Brass Powder coated curtain rod 25 dia item114 20 Each 0.00
115 M.S. Powder coated side bracket for curtain rod with
screws & accessories complete in all respect.item115 50 Each 0.00
116 Flushing Cistern P.V.C. 10 lts capacity (low level) (white)
(with fittings, accessories and flush pipe)item116 50 Each 0.00
117 PTMT bib cock 15 mm item117 20 Each 0.00
118 PTMT stop cock 15 mm (male thread) item118 20 Each 0.00
119 PTMT piller cock item119 20 Each 0.00
120 Grating with waste hole 125mm item120 80 Each 0.00
121 PTMT- Ball cock 15mm complete with Epoxy Coated
Aluminium Rod & H.D. Ballitem121 10 Each 0.00
122 PTMT- Ball cock 20mm complete with Epoxy Coated
Aluminium Rod & H.D. Ballitem122 10 Each 0.00
123 Commercial ply 12mm item123 10 Sqm 0.00
124 M.S. Handle 4" item124 40 Each 0.00
125 M.S. Handle 5" item125 40 Each 0.00
126 G.I. Socket 15mm dia item126 300 Each 0.00
127 G.I. Socket 20mm dia item127 80 Each 0.00
128 G.I. Socket 25mm dia item128 20 Each 0.00
129 G.I. Elbow 15mm dia item129 300 Each 0.00
130 G.I. Elbow 20mm dia item130 80 Each 0.00
131 G.I. Elbow 25mm dia item131 20 Each 0.00
132 G.I. Nipple 15mm dia 50 mm Long item132 200 Each 0.00
133 G.I. Nipple 15mm dia 75 mm Long item133 200 Each 0.00
134 G.I. Nipple 15mm dia 100 mm Long item134 200 Each 0.00
135 G.I. Nipple 15mm dia 150 mm Long item135 200 Each 0.00
136 G.I. Nipple 15mm dia 225 mm Long item136 200 Each 0.00
137 G.I. Nipple 15mm dia 300 mm Long item137 200 Each 0.00
138 G.I. Nipple 20mm dia 50 mm Long item138 50 Each 0.00
139 G.I. Nipple 20mm dia 75 mm Long item139 50 Each 0.00
140 G.I. Nipple 20mm dia 100 mm Long item140 50 Each 0.00
141 G.I. Nipple 20mm dia 150 mm Long item141 50 Each 0.00
142 G.I. Nipple 20mm dia 225 mm Long item142 50 Each 0.00
143 G.I. Nipple 20mm dia 300 mm Long item143 50 Each 0.00
144 Aluminium sheet (0.8mm thick) item144 10 Kg 0.00
145 PVC Tank Cover(Syntex) item145 80 Each 0.00
146 Galvanised wire mesh of average width of aperture 1.4
mm and nominal dia. Of wire 0.63 mm/sq.item146 100 Sq.ft 0.00
147 Unplasticised PVC Connection pipe with brass union 30
cm longitem147 300 Each 0.00
148 Unplasticised PVC Connection pipe with brass union 45
cm longitem148 300 Each 0.00
149 Nahani trap item149 40 Each 0.00
150 Nahani trap with hole for pipe item150 30 Each 0.00
151 MS clamp 2"X1/2" item151 50 Each 0.00
152 MS clamp 2"X3/4" item152 50 Each 0.00
153 GI Tee 1/2"X1/2" item153 80 Each 0.00
154 GI Tee 3/4"X1/2" item154 80 Each 0.00
155 GI Tee 3/4"X3/4" item155 20 Each 0.00
156 GI Tee 1"X1/2" item156 20 Each 0.00
157 GI Tee 1"X3/4" item157 20 Each 0.00
158 GI Tee 1"X1" item158 20 Each 0.00
159 Square shape 450X450mm precast RCC manhole cover
with frameitem159 20 Each 0.00
160 Bricks (Modular common burnt clay of class 7.5) item160 3000 Per 1000 Nos 0.00
161 White vitreous china clay half stall urinal flat back
580X380X350mm or angle back 450X375X350 mm with
waste fittings as per IS : 2556
item161 10 Each 0.00
162 APP modified 2mm thick membrane reinforced with
glass fibre mattitem162 50 Each 0.00
163 Brass Spindle(Piller Cock) item163 110 Each 0.00
164 Face inner of Bib cock item164 50 Each 0.00
165 M-Seal(Adhesive) item165 8 Each 0.00
166 Aluminium hanging floor door stopper with twin rubber
& stopper item166 30 Each 0.00
167 MS Tower bolt 150mm item167 30 Each 0.00
168 MS Tower bolt 200mm item168 30 Each 0.00
169 MS Tower bolt 250mm item169 30 Each 0.00
170 MS Kundi (of MS aldrop) item170 30 Each 0.00
171 MS Aldrop 250mm item171 10 Each 0.00
172 Wooden Beading item172 20 Rmt 0.00
173 Water proofing material (Dr. Fixit) item173 5 Each 0.00
174 P-Trap item174 10 Each 0.00
175 Welder (Machine+Helper) item175 20 Job 0.00
176 Glass panes 4mm with putty complete item176 50 Sqm 0.00
177 MS Door Latch 300mm item177 20 Each 0.00
178 CPVC union 25mm item178 20 Each 0.00
179 MS nut bolt item179 20 Each Set 0.00
180 Gland Dori (For 6" valve) item180 10 Mtr 0.00
181 CPVC Solvent 30ml item181 10 Each 0.00
182 CPVC Elbow 15mm item182 30 Each 0.00
183 CPVC Elbow 20 mm item183 30 Each 0.00
184 CPVC Brass Elbow 20X15 mm item184 40 Each 0.00
185 Brass Elbow 20 mm item185 40 Each 0.00
186 CPVC Socket 20 mm item186 20 Each 0.00
187 CPVC Socket 25mm item187 10 Each 0.00
188 CPVC Tee 20 mm item188 10 Each 0.00
189 CPVC Nipple 20 mm item189 20 Each 0.00
190 CPVC Reducer 15X20mm item190 20 Each 0.00
191 CPVC Reducer 15X50mm item191 20 Each 0.00
192 CPVC Reducer 15X25mm item192 20 Each 0.00
193 CPVC Reducer 20X30mm item193 20 Each 0.00
194 CPVC Pipe 15mm item194 50 Mtr 0.00
195 CPVC Pipe 20mm item195 20 Mtr 0.00
196 Nail of mixed sizes item196 5 Kg 0.00
197 Liquid Soap Container steel item197 10 Each 0.00
198 Brass handle valve 15mm item198 80 Each 0.00
199 MS Eyes & Hooks item199 30 Each 0.00
200 Non - Return Valve 20mm item200 2 Each 0.00
201 Waste coupling 32mm item201 20 Each 0.00
202 Jet Spray(for WC) item202 20 Each 0.00
203 CP Bib cock(Zim, Jaguar etc.) item203 10 Each 0.00
204 CP Pillar cock(Zim, Jagaur etc.) item204 10 Each 0.00
205 Angle Valve(Zim, Jaguar etc) item205 10 Each 0.00
206 Tower Bolt 300mm item206 5 Each 0.00
207 Large Flat back Urinal (Parryware, Cera etc.) item207 3 Each 0.00
208 Health Faucet Telephone Type (Jaguar, Zim etc.) item208 4 Each 0.00
209 WC Indian Type(Parryware, Cera etc.) item209 2 Each 0.00
210 WC European Type(Parryware, Cera etc.) item210 1 Each 0.00
211 Soap Dispenser item211 5 Each 0.00
212 Bootle Trap item212 2 Each 0.00
213 Handle Door for Office Building & Toilets (Door set) item213 3 Each 0.00
214 Push Flush System Cartridge/ Fittings item214 2 Each 0.00
215 1.5 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem215 3000 Per meter 0.00
216 2.5 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem216 2500 Per meter 0.00
217 4.0 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem217 1000 Per meter 0.00
218 6.0 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem218 500 Per meter 0.00
219 10 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem219 200 Per meter 0.00
220 16 sq. mm ISI Marked FR pvc insulated, single core
copper conductor cableitem220 400 Per meter 0.00
221 Ceiling Rose, 3pin, 5 amps ISI marked item221 50 Each 0.00
222 S.P. 5/6 amps, one way switch, piano type ISI Marked item222 450 Each 0.00
223 S.P. 5/6 amps, two way switch, piano type ISI Marked item223 20 Each 0.00
224 S.P. 15/16 amps, one way switch, piano type ISI Markeditem224 200 Each 0.00
225 3 pin 5/6 amps socket outlet, piano type ISI marked item225 100 Each 0.00
226 6 pin 15/16 and 5/6 amps socket outlet, piano type ISI
markeditem226 50 Each 0.00
227 Bell Push, piano type item227 20 Each 0.00
228 Telephone Socket outlet piano type item228 20 Each 0.00
229 S.P. 5/6 amps, one way modular switch, ISI marked
make Legranditem229 50 Each 0.00
230 S.P. 5/6 amps, two way modular switch, ISI marked
make Legranditem230 5 Each 0.00
231 S.P. 15/16 amps, one way modular switch, ISI marked
make Legranditem231 20 Each 0.00
232 3 pin 5/6 amps, modular socket outlet, ISI marked make
Legranditem232 20 Each 0.00
233 6 pin 15/16 amps, modular socket outlet, ISI marked
make Legranditem233 10 Each 0.00
234 Modular bell push, ISI marked make Legrand item234 10 Each 0.00
235 Steppeed type modular fan regulator (2 module) makeitem235 20 Each 0.00
236 Telephone Socket outlet modular type item236 10 Each 0.00
237 Call bell/buzzer, single phase item237 10 Each 0.00
238 3 pole MCCB, 100A, 16KA item238 2 Each 0.00
239 3 pole MCCB, 125A, 16KA item239 2 Each 0.00
240 3 pole MCCB, 150A, 16KA item240 2 Each 0.00
241 3 pole MCCB, 200A, 16KA item241 2 Each 0.00
242 3 pole MCCB, 200A, 25KA item242 1 Each 0.00
243 3 pole MCCB, 250A, 25KA item243 2 Each 0.00
244 3 pole MCCB, 250A, 35KA item244 1 Each 0.00
245 3 pole MCCB, 315A, 35KA item245 2 Each 0.00
246 3 pole MCCB, 400A, 35KA item246 2 Each 0.00
247 3 pole MCCB, 500A, 35KA item247 1 Each 0.00
248 3 pole MCCB, 630A, 50KA item248 1 Each 0.00
249 3 pole MCCB, 800A, 50KA item249 1 Each 0.00
250 6 amps to 32 amp, ratings, SP MCB, C curve, 10 KA
breaking capacityitem250 200 Each 0.00
251 6 amps to 32 amp, ratings, SPN MCB, C curve, 10 KA
breaking capacityitem251 100 Each 0.00
252 6 amps to 32 amp, ratings, DP MCB, C curve, 10 KA
breaking capacityitem252 20 Each 0.00
253 6 amps to 32 amp, ratings, TP MCB, C curve, 10 KA
breaking capacityitem253 15 Each 0.00
254 6 amps to 32 amp, ratings, TPN MCB, C curve, 10 KA
breaking capacityitem254 10 Each 0.00
255 Single pole, blanking plate item255 5 Each 0.00
256 40 amps. 2 pole isolator item256 5 Each 0.00
257 63 amps, 2 pole isolator item257 5 Each 0.00
258 40 amps, 4 pole isolator item258 10 Each 0.00
259 63 amps, 4 pole isolator item259 10 Each 0.00
260 100 amps, 4 pole isolator item260 5 Each 0.00
261 25 amps. Rating, 2 pole RCCB, 100 mA/300mA item261 5 Each 0.00
262 40 amps. Rating, 2 pole RCCB, 100 mA/300mA item262 2 Each 0.00
263 63 amps. Rating, 2 pole RCCB, 100 mA/300mA item263 2 Each 0.00
264 25 amps. Rating, 4 pole RCCB, 100 mA/300mA item264 2 Each 0.00
265 40 amps. Rating, 4 pole RCCB, 100 mA/300mA item265 2 Each 0.00
266 63 amps. Rating, 4 pole RCCB, 100 mA/300mA item266 2 Each 0.00
267 20 amps, SPN Industrial type socket outlet with plug top
and metal chained cover in sheet steelitem267 5 Each 0.00
268 20 amps, TPN Industrial type socket outlet with plug
top and metal chained cover in sheet steelitem268 5 Each 0.00
269 40 amps, TPN Industrial type socket outlet with plug
top and metal chained cover in sheet steelitem269 5 Each 0.00
270 4 way(4+12), TPN MCB DB, double door, horizontal typeitem270 5 Each 0.00
271 Aluminium lugs for 6sqmm cable item271 10 Each 0.00
272 Aluminium lugs for 10sqmm cable item272 10 Each 0.00
273 Aluminium lugs for 16sqmm cable item273 10 Each 0.00
274 Aluminium lugs for 25sqmm cable item274 10 Each 0.00
275 Aluminium lugs for 35sqmm cable item275 10 Each 0.00
276 Aluminium lugs for 50sqmm cable item276 10 Each 0.00
277 Aluminium lugs for 70sqmm cable item277 10 Each 0.00
278 Aluminium lugs for 95sqmm cable item278 10 Each 0.00
279 Aluminium lugs for 120sqmm cable item279 10 Each 0.00
280 Aluminium lugs for 150sqmm cable item280 10 Each 0.00
281 Aluminium lugs for 185sqmm cable item281 10 Each 0.00
282 Aluminium lugs for 225sqmm cable item282 10 Each 0.00
283 Aluminium lugs for 240sqmm cable item283 10 Each 0.00
284 Aluminium lugs for 300sqmm cable item284 10 Each 0.00
285 cotton waste, cleaning cloth etc. item285 40 per kg 0.00
286 cleaning materials like soap/detergent item286 20 per kg 0.00
287 40 amps, 4 pole MCB item287 10 Each 0.00
288 63 amps, 4 pole MCB item288 10 Each 0.00
289 100 amps, 4 pole MCB item289 5 Each 0.00
290 Sodium vapour lamp(150 watt) HPSV item290 20 Each 0.00
291 Mercury Vapour Lamp (125 watt) item291 20 Each 0.00
292 Choke/Ballast copper wound 150 watt for sodium
Vapour lampitem292 20 Each 0.00
293 Choke/Ballast copper wound 125 watt for Mercury
Vapour lampitem293 20 Each 0.00
294 ignitor(70/150/250/400) item294 20 Each 0.00
295 Capacitor 10 & 20 MFD item295 20 Each 0.00
296 Street Light with integral lamp housing and control
gear. HPSV 150 wattitem296 5 Each 0.00
297 Fan regulator(conventional) ISI marked item297 50 Each 0.00
298 40 watt copper choke for flourescent tubelight fitting item298 50 Each 0.00
299 Starter for tubelight ISI marked item299 50 Each 0.00
300 Tube holder ISI marked item300 40 Each 0.00
301 40 watt flourescent tube ISI marked item301 40 Each 0.00
302 Bulb holder for Bulb/CFL, ISI marked item302 50 Each 0.00
303 Rewinding of ceilling fan/wall fan item303 30 Each 0.00
304 Replacement of ceilling fan bearing item304 50 Each 0.00
305 Voltmeter (0-500v) Analog with selector Switch item305 2 Each 0.00
306 Voltmeter (0-500v) Digital with selector Switch item306 2 Each 0.00
307 Ammeter (0-60A) Analog with selector switch item307 2 Each 0.00
308 Ammeter (0-60A) Digital with selector switch item308 2 Each 0.00
309 CFL lamp/ PL 11 watt item309 5 Each 0.00
310 CFL lamp/ PL 18 watt item310 40 Each 0.00
311 CFL PL Tube 36 watt item311 30 Each 0.00
312 Choke for 11 watt tube item312 5 Each 0.00
313 Choke for 18 watt tube item313 40 Each 0.00
314 Choke for 36 watt tube item314 30 Each 0.00
315 Plug Top 5A ISI marked item315 10 Each 0.00
316 Plug Top 15A ISI marked item316 10 Each 0.00
317 Insulation tape item317 50 Each 0.00
318 Screw 1.5"/ any size item318 10 per packet 0.00
319 Gitti PVC/ Wooden item319 10 per packet 0.00
320 LED Indicator for panel. 24V/230v. item320 15 per set 0.00
321 PVC Pipe 1" item321 100 Per meter 0.00
322 PVC Bend 1" item322 50 Each 0.00
323 Wall fan/ceilling Fan Blades(Pankhudi) item323 4 Per set 0.00
324 16 sq.mm 3.5 core XPLE Insulated aluminium
conductor, 1.1 kv grade armoured cableitem324 100 Per meter 0.00
325 70 sq.mm 3.5 core XPLE Insulated aluminium
conductor, 1.1 kv grade armoured cableitem325 100 Per meter 0.00
326 Fan capacitor 2.5 and 4 mfd item326 100 Each 0.00
327 12V, 50 watt halogen lamp item327 25 Each 0.00
328 Filling of fire Extinguisher ABC Type 5kg item328 11 Each 0.00
329 Filling of fire Extinguisher DCP Type 5kg item329 5 Each 0.00
330 Filling of fire Extinguisher Water Type 9Litre item330 8 Each 0.00
331 Filling of fire Extinguisher CO2 Type 4.5kg item331 20 Each 0.00
332 Replacement of 25 HP pump bearing item332 4 Each 0.00
333 Glend wire of 1/2" for pumpset item333 50 Per meter 0.00
334 Greese/Lubricant item334 3 per kg 0.00
335 winding of 25 HP motor item335 1 Each 0.00
336 supply of 3 phaSE contactor 32 amp item336 2 Each 0.00
337 LED Bulb 9 w To 15w item337 30 Each 0.00
338 LED Tubelight Complete Philips\Crompton\Bajaj item338 50 Each 0.00
339 Supply, Installation, Testing and Commissioning of fire
panel make-approved by engg. Inchitem339 1 per job 0.00
340 Smoke Detector item340 5 Each 0.00
341 Providing and Fixing of Exhaust fan 300mm(Havells,
Crompton Greaves, Bajaj or an other reputed make
approved by Engineer In Charge)
item341 5 Each 0.00
342 Supply and installation of ceiling fan 48"(Havells,
Crompton Greaves, Bajaj or an other reputed make
approved by Engineer In Charge)
item342 20 Each 0.00
343 Providing and Fixing wall fan(Havells, Crompton
Greaves, Bajaj or an other reputed make approved by
Engineer In Charge)
item343 30 Each 0.00
344 Providing and making steel pole collar with cemant
concrete (1 cemant :3 coarse sand: 6 stone aggregate
20mm) of specified size and shape including form work,
plastering required, curing etc. as reqd(volume of
pole/pipe not to be deducted)
item344 30 Each 0.00
345 pdg & fixing MS Street light junction box of
size300mmX200mmX100mm deep made from 16 SWG
MS sheet with hinged cover and locking arrangement
with 2/3 nos, holes at the bottom for cable glands, 2
nos, 203mm Aluminium Bus Strips mounted on DMC
insulators, 1no. 6 Amp SP MCB C-curve with Din bar and
2 nos. clamps of MS strips 25mmX3mm I\c painting,
earthing etc. complete as reqd.
item345 30 Each 0.00
346 S.I.T.C of 36 watt road lighting luminaire with high
power LED's and unique peanutlens to ensure uniform
distribution, on existing compound light poles including
supplying and welding suitable size class'B' M.S. Nipple
on existing pole bracket I\c dismanting existing street
light fitting etc. as reqd.(PHILIPS Modal BRP 409 LED
CW 036 MR FG S1 PSU GR or any other reputed make
approved by Engineer-in-charge)
item346 15 Each 0.00
347 supply and fixing of add on block with 2 NO and 2NC
suitable switch existing contactoritem347 2 Each 0.00
348 Lifting and lowering of submersible motor, Repairing
Submersible pump & Motor.item348 2 Each 0.00
349 Erection of metallic pole of above 4.5m upto 6.5 meter
in cemant concrete 1:3:6(1 cemant : 3 coarse sand : 6
graded stone aggregate 40mm nominal size) foundation
including excavation and refilling etc as required length
item349 30 Each 0.00
350 Earthing with GI Earth pipe 4.5 mtr long, 40 dia I\c
accessories and pdg. Masonary enclosure with cover
plate having locking arrengement and watering pipe
etc. with charcoal/coke and salt, as reqd.
item350 20 Each 0.00
Total in Figures
Quoted Rate in FiguresSelect
Quoted Rate in Words